Administration of the Avaya G350 Media Gateway - Avaya Support

Administration proceduresFailure scenarios and repair actionsThe G350 initiates power up tests automatically, without the need for operator intervention, andexecutes tests in the order defined below.The power-up self-tests are executed during the early boot sequence and before the G350’sdata output interfaces are enabled and begin transmitting packets.The power-up self-test order is:1. Booter Integrity Self test2. Image Integrity Self test3. NVRAM Self test4. PRNG Self-test5. Crypto Self-tests6. EEPROM Self-testThe power-up self test progress is output to the Gateway console port.For each self-test listed, the process that dispatches the self-test execution outputs the name ofthe test performed and, on completion of the test, the process outputs results – passed or failed."Booter Integrity power-up self test "Passed""Image Banks Integrity power-up self test" "Failed""NVRAM integrity power-up self test" "Passed""PRNG integrity power-up self test" "Passed""Crypto integrity power-up self test" "Passed""EEPROM integrity power-up self test" "Passed"If the G350 fails a conditional or power-up self-test, the module enters the error state. All dataoutput interfaces are immediately blocked.Issue 3 January 2005 319