Administration of the Avaya G350 Media Gateway - Avaya Support

FIPS18. To configure all interfaces, including the IP addresses, use the interface command. Forexample:G350-N(super)# interface FastEthernet 10/2G350-N(if:fastEthernet 10/2)# ip crypto-group 901Done!G350-N(if:fastEthernet 10/2)# mtu 1492Done!G350-N(if:fastEthernet 10/2)# ip address 10.0.0.1 255.255.255.0G350-N(if:fastEthernet 10/2)# exitG350-N(super)#G350-N(super)# interface Tunnel 1Line protocol on Interface Tunnel 1, changed state to downG350-001(super-if:Tunnel 1)#G350-N(if:Tunnel 1)# tunnel source 10.0.0.1Done!G350-N(if:Tunnel 1)# tunnel destination 10.0.0.2Done!G350-N(if:Tunnel 1)# ip address 10.20.0.1 255.255.255.252Done!G350-N(if:Tunnel 1)# exitG350-N(super)#G350-N(super)# interface Serial 2/1:1G350-N(if: serial 2/1)# encapsulation pppDone!G350-N(if: serial 2/1)# ip address 1.0.0.1 255.255.255.252G350-N(if: serial 2/1)# exitG350-N(super)#19. To change the password of the default Crypto-officer●Use the username command to change the root user password to comply with theminimum secret length requirements.G350-001(super)# username root password westminster access-type adminUser account modified.G350-001(super)#20. Define additional operators for Crypto-officer, User, and Read-Only User roles, as required.21. Remove all unnecessary users.●Use the show username command to list CLI users.G350-N(super)# show usernameUser Access Account Active Authent.account level type method-------------------------------- ----------- ---------- ------ ----------root admin local yes password312 Administration of the Avaya G350 Media Gateway