Administration of the Avaya G350 Media Gateway - Avaya Support

FIPS10. Physically disconnect all network interfaces.●This ensures that no external activity interferes with the following steps.11. Disable Signaling Encryption (H.248).●Use the disable link encryption command.G350-N(super)# disable link encryptionNote:Note:You must administer the G350 in CM with the encrypted link off. Otherwise, afterdisabling encryption in the G350, you cannot establish a signaling link later.12. Disable Avaya Media Encryption (SRTP, AEA, RTP/AES).● Use the disable media encryption command.G350-N(super)# disable media encryption13. Disable the USB and Console modem interfacesa. To disable the Console interface, use the async mode terminal command.G350-N(super)# interface ConsoleG350-N(super-if:Console)# async mode terminalDone!G350-N(super-if:Console)# exitb. To disable the USB interface, use the shutdown command.G350-N(super)#interface USB-ModemG350-N(super-if:USB-Modem)# shutdownThis command will disconnect your current dial-in modem session and blockfuture dial-in attempts over this modem interface - do you want tocontinue (Y/N)? YDone!G350-N(super-if:USB-Modem)# exit14. To disable the recovery password mechanism, use theset terminal recovery password disable command.G350-N(super)#set terminal password recovery disableDone!310 Administration of the Avaya G350 Media Gateway