Administration of the Avaya G350 Media Gateway - Avaya Support

Administration procedures5. Verify that both firmware banks contain firmware images that have been FIPS-approved.a. Use the dir command.G350-N(super)# dirM# file ver num file type file location file description-- ---- -------- ---------- ------------- ----------------1 Voice (Initializing) N/A SW RT Image Nv-Ram Voice (Initializing) -image7 Voice (Initializing) N/A SW RT Image Nv-Ram Voice (Initializing) -image7 Analog 57 SW RT Image Nv-Ram Analog - image10 startup-config N/A Startup Conf Nv-Ram Startup Config10 running-config N/A Running Conf Ram Running Config10 G350-A 3.0.x SW RT Image Flash Bank A Software Image Bank A10 G350-B 3.0.x SW Component Flash Bank B Software Image Bank B10 G350 1.0.19 SW Web Image Nv-Ram EmWeb application10 G350-Booter 3.5.0 SW BootImage Nv-Ram Booter Image10 sniffer N/A Other Ram Sniffer Capture10 phone-ScriptA N/A Phone Script Nv-Ram N/A10 phone-ScriptB N/A Phone Script Nv-Ram N/A10 phone-ImageA N/A Phone Image Ram N/A10 phone-ImageB N/A Phone Image Ram N/A10 phone-ImageC N/A Phone Image Ram N/A10 phone-ImageD N/A Phone Image Ram N/A10 dhcp-binding N/A DHCP Binding Nv-Ram Ip Address Bindingb. Check that the value in the “ver num” column for each bank (G350-A and G350-B) is23.12.50 or higher.6. Verify successful completion of power-up self-tests.- Use the show self-test-status command.G350-N(super)# show self-test-statusDevice successfully passed the power-up self test sequence.7. If a more recent FIPS-approved G350 image is available, download it using the imagedownload procedures.● Use the copy tftp image command.8. Download the Avaya License file with VPN feature activated if it is not installed.● Use the copy tftp-license-file command.9. Reset the gateway.● Use the reset command.G350-N(super)# resetThis command will reset the device*** Reset the device *** - do you want to continue (Y/N)? yResetting the device...GW-A-001(super)#Issue 3 January 2005 309