Administration of the Avaya G350 Media Gateway - Avaya Support

Accessing the CLIIf you type help or ? before or after a full command, the CLI displays the command’s syntaxand parameters, and an example of the command. You must be in the command’s context inorder to use the help command to display information about the command. In the followingexample, the user enters the context of the Vlan 1 interface and displays help for thebandwidth command.G350-001(super)# interface vlan 1G350-001(super-if:Vlan 1)# bandwidth ?Bandwidth commands:----------------------------------------------------------------------Syntax: bandwidth : integer (1-10000000)Example: bandwidth 1000Accessing the CLI locallyThere are two ways you can access the CLI locally:●●Accessing CLI via local networkAccessing CLI with a console deviceAccessing CLI via local networkYou can access the CLI from a computer on the same local network as the Avaya G350 MediaGateway by using any standard telnet program. For the host address, you can use the IPaddress of any G350 interface.Accessing CLI with a console deviceTo access the CLI with a console device, use one of the following types of console devices:●Serial terminal● Laptop with serial cable and terminal emulator softwareConnect the console device to the console port (CONSOLE) on the front panel of the AvayaG350 Media Gateway. Use only an approved Avaya serial cable. For more information aboutapproved Avaya serial cables, see Overview of the Avaya G350 Media Gateway, 555-245-201.For more information about the console port, see Configuring the console port for modemuse on page 78.Issue 3 January 2005 29