Administration of the Avaya G350 Media Gateway - Avaya Support

Configuring policySimulating packetsUse the ip simulate command in the context of an interface to test a policy list. Thecommand tests the effect of the policy list on a simulated IP packet in the interface. You mustspecify the number of a policy list, the direction of the packet (in or out), and a source anddestination IP address. You may also specify other parameters. For a full list of parameters, seeAvaya G350 Media Gateway CLI Reference, 555-245-202.The following command simulates the effect of applying QoS list number 401 to a packetentering the G350 through interface VLAN 2:G350-001(if:Vlan 2)# ip simulate 401 in CoS1 dscp46 10.1.1.110.2.2.2 tcp 1182 20The simulated packet has the following properties:● CoS priority is 1● DSCP is 46● source IP address is 10.1.1.1.● destination IP address is 10.2.2.2.●IP protocol is TCP● source TCP port is 1182● destination TCP port is 20When you run the ip simulate command, the G350 displays the effect of the policy rules onthe simulated packet. For example:G350-001(super-if:Vlan 2)# ip simulate 401 in CoS1 dscp46 10.1.1.110.2.2.2 tcp 1182 20Rule match for simulated packet is the default ruleComposite action for simulated packet is CoS6New priority value is fwd6Dscp value is not changed272 Administration of the Avaya G350 Media Gateway