Administration of the Avaya G350 Media Gateway - Avaya Support

Configuring a site-to-site IPSec VPNTo install the license file:1. Use one of the following CLI commands:● copy ftp license-file filename ip●●copy tftp license-file filename ipcopy scp license-file filename ipwhere:● filename – the filename, including the full path● ip – the ip address of the ftp/tftp/scp server.For example: copy tftp license-file g350.lic 198.87.134.1532. Optionally use the show download license-file status CLI command to view thestatus of the download process.3. Use the show license status CLI command to verify that the license was installed.4. Use the copy running-config startup-config command to save your currentconfiguration.5. Reset the G350 using the reset CLI command.Configuring ISAKMP policiesAn ISAKMP policy defines the IKE phase 1 parameters.Important:! Important:You must define at least one ISAKMP policy.Note:Note: You can configure up to 20 ISAKMP policies.To configure an ISAKMP policy:1. Enter ISAKMP policy context and create an ISAKMP policy, using the crypto isakmppolicy CLI command.G350-001# crypto isakmp policy 1G350-001(config-isakmp:1)#2. Configure the following ISAKMP policy parameters:●●description: the description of the ISAKMP policyencryption: the encryption algorithm for the ISAKMP policy: des, 3des, or aes(default: des)Issue 3 January 2005 209