13.07.2015 Views

Administration of the Avaya G350 Media Gateway - Avaya Support

Administration of the Avaya G350 Media Gateway - Avaya Support

Administration of the Avaya G350 Media Gateway - Avaya Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Configuring <strong>the</strong> routerPoison-reverse updates explicitly indicate that a network or subnet is unreachable.Poison-reverse updates are sent to defeat large routing loops. Use <strong>the</strong> ip rippoison-reverse command to enable split-horizon with poison-reverse on an interface. Use<strong>the</strong> no form <strong>of</strong> this command to disable <strong>the</strong> poison-reverse mechanism.RIP distribution access listsRIP distribution access lists consist <strong>of</strong> rules that specify how a router distributes and acceptsRIP routing information from o<strong>the</strong>r routers. Before sending an update, <strong>the</strong> router consults anaccess list to determine if it should include specific routes in <strong>the</strong> update. When receiving anupdate, <strong>the</strong> router first checks a set <strong>of</strong> rules which apply to incoming updates to determine if itshould insert those routes into its routing table. You can assign <strong>the</strong> rules per interface and perdirection.Up to 99 RIP distribution access lists can be configured on <strong>the</strong> <strong>Avaya</strong> <strong>G350</strong> <strong>Media</strong> <strong>Gateway</strong>.For example: To configure RIP distribution access list number 10 permitting distribution andlearning <strong>of</strong> network 10.10.0.0:1. Enter <strong>the</strong> command: ip distribution access-list 10 1 permit 10.10.0.00.0.255.255The default action <strong>of</strong> <strong>the</strong> access list is deny and can be changed using <strong>the</strong>ip distribution access-default-action command.Note:Note:Whenever at least one permit rule exists, distributing and learning <strong>of</strong> all <strong>the</strong>remaining networks is denied, unless specifically permitted by ano<strong>the</strong>r rule.2. Apply <strong>the</strong> distribution list created in Step 1 by performing <strong>the</strong> following procedure within <strong>the</strong>router rip context:- Enter <strong>the</strong> distribution-list 10 in command to apply list number 10 created inStep 1 on all updates received on all interfaces.- Enter <strong>the</strong> distribution-list 10 in FastE<strong>the</strong>rnet 6/1 command to applyAccess List 10 on updates received on interface ‘FastE<strong>the</strong>rnet 6/1’.- Enter <strong>the</strong> distribution-list 10 out command to apply Access List 10 to alladvertised updates.- Enter <strong>the</strong> distribution-list 10 out ospf command to apply Access List 10 to alladvertised updates that were learned from OSPF (redistributed from OSPF into RIP).If no distribution access list is defined, learning and advertising is allowed for all <strong>of</strong> <strong>the</strong> routinginformation. This is <strong>the</strong> default.192 <strong>Administration</strong> <strong>of</strong> <strong>the</strong> <strong>Avaya</strong> <strong>G350</strong> <strong>Media</strong> <strong>Gateway</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!