Administration of the Avaya G350 Media Gateway - Avaya Support

Configuring advanced switching●●●●●●●●●●Use the set port static-vlan command to assign static VLANs to ports.Use the set port vlan command to set the port VLAN ID (PVID).Use the set port vlan-binding-mode command to define the binding method usedby ports.Use the set trunk command to configure the VLAN tagging mode of a port.Use the set vlan command to configure VLANs.Use the show cam vlan command to display all mac entries in the CAM table for aspecific vlan.Use the show interfaces vlan command to display interface configuration andstatistics for a particular VLAN or all VLANs.Use the show port-vlan-binding command to display port VLAN binding modeinformation. If no module number is specified then information for all ports on all modulesis displayed. If no port number is specified, information for all ports on the specifiedmodule is displayed.Use the show trunk command to display VLAN tagging information for the switch.Use the show vlan command to display the VLANs configured in the switch.VLAN configuration examplesThis section provides VLAN configuration examples.The following example deletes a statically bound VLAN from a port:G350-001(super)# clear port static-vlan 10/3 34VLAN 34 is unbound from port 10/3The following example deletes a VLAN and its interface:G350-001(super)# clear vlan 34This command will assign all ports on VLAN 34 to their default in theentire management domain — do you want to continue (Y/N)? yAll ports on VLAN-id assigned to default VLAN.VLAN 34 was deleted successfully.The following example sets the current VLAN as the ICC-VLAN:G350-001(super)# interface Vlan 66G350-001(super-if:Vlan 66)# icc-vlanDone!The following example enters configuration mode for a VLAN interface:G350-001(super)# interface Vlan 66G350-001(super-if:Vlan 66)#136 Administration of the Avaya G350 Media Gateway