Administration of the Avaya G350 Media Gateway - Avaya Support

Configuring SNMPGroup NameSecurityModelSecurity LevelRead ViewNameWrite ViewNameTrap ViewNameWriteCommG v2c 2 (noAuth) snmpv1WriteViewsnmpv1WriteViewsnmpv1WriteViewv3ReadWriteG v3 (USM) 2 (noAuth) v3configview v3configview v3configviewv3ReadOnlyG v3 (USM) 2 (noAuth) v3configview v3configviewinitial v3 (USM) 1 (noAuthNoPriv) restricted restricted restrictedv3AdminViewG v3 (USM) 3 (AuthPriv) iso iso iso2 of 2ViewsThere are three types of views:●●Read Views — Allow read-only access to a specified list of Object IDs (OIDs) in the MIBtree.Write Views — Allow read-write access to a specified list of OIDs in the MIB tree.● Notify Views — Allow SNMP notifications from a specified list of OIDs to be sent.Each view consists of a list of OIDs in the MIB tree. This list can be created using multiplesnmp-server view commands to either add OIDs to the list or exclude OIDs from a list of allof the OIDs in the G350’s MIB tree. You can use wildcards to include or exclude an entirebranch of OIDs in the MIB tree, using an asterisk instead of the specific node. For a list of MIBsand their OIDs, see G350 MIBs on page 331.To create an SNMPv3 view, the following information must be provided:● ViewName — A string of up to 32 characters representing the name of the view.●●ViewType — Indicates whether the specified OID is included or excluded from the view.OIDs — A list of the OIDs accessible using the view.124 Administration of the Avaya G350 Media Gateway