Administration of the Avaya G350 Media Gateway - Avaya Support

Configuring a WAN Interface● VLAN interface configuration:G350-001# interface Vlan 1G350-001(if:Vlan 1)# ip address 149.49.54.24Done!G350-001(if:Vlan 1)# exitG350-001# interface Vlan 2G350-001(if:Vlan 2)# ip address 11.11.11.1 24Done!G350-001(if:Vlan 2)# exit● Serial interface configuration:G350-001# interface Serial 5/1G350-001(if:Serial 5/1)# ip address 2.2.2.1 24G350-001(if:Serial 5/1)# mtu 300Note:Note: Some LAN data applications do not support fragmented packets. In this case, donot change the MTU from its default of 1500.G350-001(if:Serial 5/1)# bandwidth 128● VoIP configuration:G350-001(if:Serial 5/1)# ip rtp header-compressionG350-001(if:Serial 5/1)# ip rtp compression-connections 20 (4)G350-001(if:Serial 5/1)# ip rtp port-range 2048 3028 (5)G350-001(if:Serial 5/1)# exit● Static routes configuration:G350-001# ip default-gateway 5/1* Description of footnoted commands (also applies to identical stagesin configuring Site B):(1) At this stage you apply Priority 7 to Voice Control traffic.(2) At this stage you apply Priority 6 to RTP traffic.(3) At this stage you apply maximum trust between 802.1p priority and DSCP.(4) At this stage the number of connections (20) depends on the number of phones.(5) At this stage you are matching the RTP port range to that of the G350.(6) At this stage the default queue size is 6, and since RTP is enabled you can double the VoIPqueue size.108 Administration of the Avaya G350 Media Gateway