2 - CMV-Steck

X A L I S
XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed
to provide display and signals transmission solutions.
XALIS disign allows exceptional performances in a fitted 48 X 96 X 75 mm case with unplugged
connections and USB plug on rear panel.

XALI S
XALI S : RANGE
2 COLORS DIGITAL DISPLAY
5 DIGITS
18mm
2 COLORS ALPHANUmERIC
DISPLAY
9 DIGITS 8mm
XALI S FUNCTIONS
DISPLAY
DISPLAY COLOR
REFERENCES
X A LI S 9000U0
X A LI S 9000U1
X A LI S 9200U0
X A LI S 9200U1
X A LI S 9400U1
X A LI S 0030U1
COLOR DISPLAY CHANGE
INPUTS
CURRENT VOLTAGE
PT100/POTENTIOmETER
THERmOCOUPLE
SENSOR
SUPPLY
1 Analogue
Isolated
PHYSICAL UNITS 2 COLORS DISPLAY
ALARm STATUS DISPLAY
mENU KEY
SCROLLING KEYS
ENTER KEY
2 colors numerical and alphanumerical display
Color choice green or red separetely on digital or alphanumerical display.
Automatic color change possibility in case of alarm
INPUT DISPLAY The indicator enables to display, the inputs in physical or programmed value.
OUTPUTS DISPLAY The indicator enables to display outputs, in physical value or in percent, it also
displays alarms status.
PROGRAmmATION Programmation with 4 keys on front face and with USB plug on rear panel with free
software S E T L I N E.
OFFSET Input Offset setting on all input types.
TARE Tare setting on mV and mA input.
OUTPUTS COmmUNICATION
2
RELAYS
4
RELAYS
SImULATION Simulation function allows action concerning analogue output, relays and display separately
from input and without disconnecting input or ouptut.
Digital
RS485
Back face USB
2

USB
XALI S
XALI S FUNCTIONS
OUTPUT LImITS Allows outputs limitation values – High and low limits.
mEmORISATION Allows last measurement memorisation in case of error
ALARmS RESET Separately on each alarm.
ALARmS mEmORISATION Separately on each alarm.
COmmUNICATION
UNIT
INPUT SCALE FACTOR
OUTPUT SCALE FACTOR
mIN /mAX mEmORY
SENSOR SAFETY
100 POINTS LINEARIZATION
SQUARE ROOT
THRESHOLDS
OTHER FUNCTIONS
USB on rear face enables easy PC programmation via S E T L I N E sofware freely downloadable
on www.jmconcept.com website
All indicators have a RS485 mODBUS, bidirectional digital link allowing :
-To recover of all measurements
-To configurate and drive the indicator.
2 digits physical unit display following numerical display or unit display with several letters
and/or numbers on alphanumercal line.
CJC Cold Junction Compensation with 16Bits digital sensor.
XALI S : TECHNICAL CHARACTERISTICS
INPUT/OUTPUT CHARACTERISTICS
INPUT IMPEDANCE
Current input
Voltage10V
PT10; PT100; Ni100; Cu50; Cu53; Cu100 input
Ni1000; PT1000 input
2 wires resistor R=200Ω; R=1kΩ input
2 wires resistor R=10kΩinput
OUTPUT IMPEDANCE
Current output
Voltage output
Allows to provide a magnifying effect on input in manual or automatic calibration.
Allows to provide a magnifying effect on output and on display.
minimum or maximum measured values memorisation
Shows sensor break on display, on analog output (by entering drop out value), on relays
and digital output.
Linearization allows to create an output function by input signal segmentation.
Output is the square root of the input.
Simple mode or band-mode with positive or negative safety.
Threshold, hysteresis and temporization adjustment (separetely from rise or fall).
Direct access to thresholds. Alarm memorizing and alarm deleting.
Cut Off ; Resolution ; Comma ; Filtering ; Display light off.
5,6Ω
> 10MΩ
1MΩ
Current : 1mA
Current : 0,25mA
Current: 1mA
Current : 0,2mA
< 950Ω
> 4,7kΩ
SENSOR
Sensor power supply U < 24V - I < 36mA
RELAY OUTPUTS
Relay Relay 1C/O: 2A/250Vac
3

XALI S
XALI S : TECHNICAL CHARACTERISTICS
GENERAL CHARACTERISTICS
Precision class
Analogue input/digital conversion
Digital output/analogue conversion
Response time mV, mA, thermocouple, resistor
Response time RTD, potetiometer
Thermal drift
Current output residual ripple
Voltage output residual ripple
Supply / Input
Supply / Output
Input / Analogue output
Input / Digital output
Analogue output / Digital output
OTHER CHARACTERISTICS
Standard auxiliary source
Auxiliary source in option
Consumption
TEMPERATURE
Operating temperature
Storage temperature
PROTECTION INDEX
CASE
XALI S : INPUT CHARACTERISTICS
0.1
24 bits
16 bits
< 100ms
< 250ms
< 25ppm
< 20μA
< 10mV
5000Vdc - 3750Vac, 50Hz, 1mn
5000Vdc - 3750Vac, 50Hz, 1mn
5000Vdc - 3750Vac, 50Hz, 1mn
3500Vdc - 2500Vac, 50Hz, 1mn
3500Vdc - 2500Vac, 50Hz, 1mn
20Vdc/370Vdc & 80Vac / 256Vac
20Vac/60Vac
< 4VA
-10°C / +60°C
-25°C / +80°C
IP65
Black ABS self-extinguible UL V0
CURRENT (dc) Standard scales : 0/1mA ; 0/10mA ; 0/20mA ; 4/20mA ; +/-1mA ; +/-
10mA ; +/-20mA
Adjustable scales : From -22mA To 22mA
VOLTAGE (dc) Standard scales : 0/100mV ; 0/1V ; 0/5V ; 1/5V ; 0/10V 2/10V ;0/50V ;
0/100V ; 0/200V; +/-100mV ; +/-1V ; +/-5V ; +/-10V +/-50V ; +/-100V ;
+/-200V
Adjustable scales : From -110mV to 110mV From -2V à 11V From -200V
to 220V
RTD PT10; PT100 ; PT1000 ; Ni100 ; Ni1000 2 ou 3 fils, C50, Cu53, Cu100
THERmOCOUPLE J, K, T, B, R, S, E, Nimo, N, W3/C, W5/D, P
POTENTIOmETER De 470Ω à 100KΩ - other value on demand
2 WIRES RESISTOR 0/200Ω ; 0/1KΩ ; 0/10KΩ - other values on demand
SENSOR POWER SUPPLY Capteur 2 ou 3 fils - Sensor power supply : 24V - 36mA max
4

XALI S
XALI S : DIGITAL LINK CHARACTERISTICS
DIGITAL OUTPUT - RS 485 isolated modbus Digital output enables X A LI S programmation, and
to recover every X A LI S measurement.
- USB on rear face enable easy PC programmation via S E T L I N E sofware
freely downloadable on www.jmconcept.com website.
mAPPING Open the possibility to choose your own mODBUS parameter addresses.
ANALOGUE OUTPUT X A LI S 9000U1 - X A LI S 9200U1 - X A LI S 9400U1 - X A LI S 0030U1
CURRENT
VOLTAGE
XALI S : OUTPUT CHARACTERISTICS
Standard scales : 0/10ma ; 0/20mA ; 4/20mA
Adjustable scales : From 0 to 22mA
Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V
Adjustable scales : From 0 to 10V
2 RELAYS OUTPUTS X A LI S 9200U0 - X A LI S 9200U1
2 Relays 1RT - 2A /250Vac
4 RELAYS OUTPUTS X A LI S 9400U1
4 Relays 1RT - 2A /250Vac
XALI S : OPTIONS REFERENCES
OPTIONS PRODUCT CODE
Varnish X A LI S9x0xUx-T ou X A LI S003xU1-T
Auxiliairy supply 20Vac / 60Vac X A LI S9x09Ux ou X A LI S0039U1
XALI S : INPUT WIRINGS
CURRENT
INPUT
16 13
- +
+/-10V INPUT
HIGH VOLTAGE INPUT
16 14
- +
SENSOR INPUT
2 WIRES
13 12
- +
POTENTIOmETER
16 15 11
- +
SENSOR INPUT
3 WIRES
16 13 12
- +
THERmOCOUPLE
16 15
- +
VOLATGE
INPUT
16 15
- +
PT, Ni, Cu INPUT
16 15 11
- +
5

XALI S
XALI S OUTPUTS WIRINGS
RELAY 1
17 18 19
AUXILIARY
SOURCE
1 2
Without
polarity
CURRENT
OUTPUT
7 6
VOLTAGE
OUTPUT
7 8
- + - +
RELAY 2
20 21 22
XALI S : OTHERS WIRINGS
RELAY 3
23 24 25
POWER SUPPLY DIGITAL OUTPUT
XALI S : CUT OUT DIMENSIONS AND TERMINALS
Deapth max with 95mm terminals.
RS485
mODBUS
9 10
A B
RELAY 4
26 27 28
6
TB27 - Documentation non contractuelle.
Contenus sujets à modifications sans préavis.