ELED QW Strip User Manual (pdf) - Elation Professional

ELED QW StripIntroductionELED QW StripUser InstructionsUnpacking: Thank you for purchasing the ELED QW Strip by ElationProfessional®. Every ELED QW Strip has been thoroughly testedand has been shipped in perfect operating condition. Carefully checkthe shipping carton for damage that may have occurred during shipping.If the carton appears to be damaged, carefully inspect your fixturefor any damage and be sure all accessories necessary to operatethe unit has arrived intact. In the case damage has been found or partsare missing, please contact our customer support number for furtherinstructions. Do not return this unit to your dealer without first contactingcustomer support.Introduction: The ELED QW Strip is part of Elation Professionals®continuing pursuit for creating high quality affordable intelligent fixtures.The ELED QW Strip is a powerful DMX intelligent 4-in-1 RGBW(Red, Green, Blue, & White) LED strip. This unit can has 4 operatingmodes; Macro mode, Program mode, RGBW mode, and DMX controlled.This unit can be used as a single, stand alone unit or used in amaster-slave configuration.Customer Support: ©Elation® provides a customer support line, toprovide set up help and to answer any question should you encounterproblems during your set up or initial operation. You may also visit uson the web at www.elationlighting.com for any comments or suggestions.Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.Pacific Standard Time.Voice: (323) 582-3322Fax: (323) 832-9142E-mail: support@elationlighting.comWarning! To prevent or reduce the risk of electrical shock or fire, donot expose this unit to rain or moisture.Caution! There are no user serviceable parts inside this unit. Do notattempt any repairs yourself, doing so will void your manufactures warranty.In the unlikely event your unit may require service please contact©Elation customer support.PLEASE recycle the shipping carton when ever possible.12/12Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 2

ELED QW StripELED QW StripELED QW StripGeneral InstructionsTo optimize the performance of this product, please read these operatinginstructions carefully to familiarize yourself with the basic operationsof this unit. These instructions contain important safety informationregarding the use and maintenance of this unit. Please keep this manualwith the unit, for future reference.Features• Multi-Colors• Built in Microphone• Four Operating Modes• 68 Color Macros• DMX-512 protocol• 9 DMX Modes: 1 Channel Mode, 2 Channel Mode, 4 ChannelMode, 5 Channel Mode, 7 Channel Mode, 8 Channel Mode, 36Channel Mode, 54 Channel Mode, & 72 Channel Mode.• Pixel Direction Control: The direction in which the pixels light upcan be reversed so that the pixels can light up at either end of thebar. This feature is used with 36 DMX Channel mode, 54 DMXChannel mode, and 72 DMX Channel mode. This feature is alsoused with some built-in programs under Program Mode.Warranty RegistrationThe ELED QW Strip carries a two year limited warranty. Please fill outthe enclosed warranty card to validate your purchase. All returnedservice items whether under warranty or not, must be freight pre-paidand accompany a return authorization (R.A.) number. The R.A. numbermust be clearly written on the outside of the return package. A briefdescription of the problem as well as the R.A. number must also bewritten down on a piece of paper included in the shipping carton. Ifthe unit is under warranty, you must provide a copy of your proof ofpurchase invoice. You may obtain a R.A. number by contacting ourcustomer support team on our customer support number. All packagesreturned to the service department not displaying a R.A. numberon the outside of the package will be returned to the shipper.ELED QW StripSafety Precautions• To reduce the risk of electrical shock or fire, do not expose this unitrain or moisture• Do not spill water or other liquids into or on to your unit.• Do not attempt to operate this unit if the power cord has beenfrayed or broken. Do not attempt to remove or break off the groundprong from the electrical cord. This prong is used to reduce the riskof electrical shock and fire in case of an internal short.• Disconnect from main power before making any type of connection.• Do not remove the cover under any conditions. There are no userserviceable parts inside.• Never operate this unit when it’s cover is removed.• Never plug this unit in to a dimmer pack• Always be sure to mount this unit in an area that will allow properventilation. Allow about 6” (15cm) between this device and a wall.• Do not attempt to operate this unit, if it becomes damaged.• This unit is intended for indoor use only, use of this product out`doors voids all warranties.• During long periods of non-use, disconnect the unit’s main power.• Always mount this unit in safe and stable matter.• Power-supply cords should be routed so that they are not likely tobe walked on or pinched by items placed upon or against them,paying particular attention to the point they exit from the unit.• Cleaning -The fixture should be cleaned only as recommended byt he manufacturer. See page 19 for cleaning details.• Heat -The appliance should be situated away from heat sourcessuch as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.• The fixture should be serviced by qualified service personnel when:A. The power-supply cord or the plug has been damaged.B. Objects have fallen, or liquid has been spilled into the appliance.C. The appliance has been exposed to rain or water.D. The appliance does not appear to operate normally or exhibits amarked change in performance.Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 3Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 4

ELED QW StripOperating Instructionsmode, 54 Channel mode, and a 72 Channel mode. See pages 11-16 foreach modes’ DMX traits.1. This function will allow you to control each individual fixture’s traitswith a standard DMX 512 controller such as the Elation® ShowDesigner or the Elation® DMX Operator.2. To run your fixture in DMX mode, plug in the fixture via the XLR connectionsto any standard DMX controller. Select your desired DMXmode, and then press the UP or DOWN buttons to adjust the DMXaddress.3. DMX Channel Modes are as follows:• To run the 1 Channel Mode, press the MODE button until “1Channel DMX” is displayed. This is the DMX addressing for the 1Channel Mode.• To run the 2 Channel Mode, press the MODE button until “2Channel DMX” is displayed. This is the DMX addressing for the 2Channel Mode.• To run the 4 Channel Mode, press the MODE button until “4Channel DMX” is displayed. This is the DMX addressing for the 4Channel Mode.• To run the 5 Channel Mode, press the MODE button until “5Channel DMX” is displayed. This is the DMX addressing for the 5Channel Mode.• To run the 7 Channel Mode, press the MODE button until “7Channel DMX” is displayed. This is the DMX addressing for the 7Channel Mode.• To run the 8 Channel Mode, press the MODE button until “8Channel DMX” is displayed. This is the DMX addressing for the 8Channel Mode.• To run the 36 Channel Mode, press the MODE button until “36Channel DMX” is displayed. This is the DMX addressing for the 36Channel Mode.• To run the 54 Channel Mode, press the MODE button until “54Channel DMX” is displayed. This is the DMX addressing for the 54Channel Mode.• To run the 72 Channel Mode, press the MODE button until “72Channel DMX” is displayed. This is the DMX addressing for the 72Channel Mode.4. Please see pages 11-16 for DMX values and traits.Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 9ELED QW StripMaster-Slave ConfigurationMaster-Slave Operation:This function will allows you to link units together to run in a Master-Slavemode. In Master-Slave operation one unit will act as the controlling unitand the others will react to the controlling units built-in programs. Anyunit can act as a Master or as a Slave however, only one unit can be programmedto act as the “Master.”Master-Slave Connections and Settings:1. Daisy chain your units via the XLR connector on the rear of the unit.Use standard XLR data cables to link your units together. Rememberthat the Male XLR connector is the input and the Female XLRconnector is the ouput. The first unit in the chain (master) will usethe female XLR connector only. The last unit in the chain will use themale XLR connector only.2. Set the “Master” unit to your desired mode or operation.3. For the “Slave” unit(s), set the display to any DMX channel mode.4. Connect the “Slave” unit or units and they will automatically start tofollow the “Master.”Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 10

ELED QW StripChannel Value Function1 0 - 255 COLOR MACROSELED QW Strip1 Channel ModePLEASE SEE COLOR MACRO CHART ON PAGE 17Channel Value Function1 0 - 255 COLOR MACROS2 Channel ModePLEASE SEE COLOR MACRO CHART ON PAGE 172 0 - 255 MASTER DIMMER 0% - 100%ELED QW StripChannel Value Function1 RED0 - 255 0% - 100%2 GREEN0 - 255 0% - 100%3 BLUE0 - 255 0% - 100%4 WHITE0 - 255 0% - 100%4 Channel ModeELED QW Strip5 Channel ModeChannel Value Function1 RED0 - 255 0% - 100%2 GREEN0 - 255 0% - 100%3 BLUE0 - 255 0% - 100%4 WHITE0 - 255 0% - 100%5 MASTER DIMMER0 - 255 0% - 100%ELED QW StripChannel Value Function1 RED0 - 255 0% - 100%2 GREEN0 - 255 0% - 100%3 BLUE0 - 255 0% - 100%4 WHITE0 - 255 0% - 100%5 0 - 255 COLOR MACROS7 Channel ModePLEASE SEE COLOR MACRO CHART ON PAGE 176 0 - 15 NOTHING16 - 255 STROBING/SPEED CONTROL7 MASTER DIMMER0 - 255 0% - 100%Channel 1, 2, 3, & 4 will not work, when Channel 5 is beingused.Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 11Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 12

ELED QW StripChannel Value Function1 RED0 - 255 0% - 100%2 GREEN0 - 255 0% - 100%3 BLUE0 - 255 0% - 100%4 WHITE0 - 255 0% - 100%5 1 - 255 COLOR MACROS8 Channel ModePLEASE SEE COLOR MACRO CHART ON PAGE 176 STROBING/PROGRAM SPEED0 - 15 NOTHING16 - 255 STROBINGSLOW - FAST1 - 255 PROGRAM SPEED SLOW - FAST7 MODE0 - 127 OFF128 - 159 AUTO MIX160 - 191 3 COLOR JUMP192 - 223 7 COLOR JUMP224 - 255 SOUND ACTIVE8 MASTER DIMMER0 - 255 0% - 100%Channel 1, 2, 3, & 4 will not work, when Channel 5 is beingused.When using Channel 7, Channel 6 will control the speed of thecolor changing.ELED QW StripChannel Value Function36 Channel Mode1 RED (LED 1 & 2)0 - 255 0% - 100%2 GREEN (LED 1 & 2)0 - 255 0% - 100%3 BLUE (LED 1 & 2)0 - 255 0% - 100%4 WHITE (LED 1 & 2)0 - 255 0% - 100%5 RED (LED 3 & 4)0 - 255 0% - 100%6 GREEN (LED 3 & 4)0 - 255 0% - 100%7 BLUE (LED 3 & 4)0 - 255 0% - 100%8 WHITE (LED 3 & 4)0 - 255 0% - 100%*CHANNELS 9-28 THE SAME RGBW LED PATTERN CONTINUES**THE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE 8*29 RED (LED 15 & 16)0 - 255 0% - 100%30 GREEN (LED 15 & 16)0 - 255 0% - 100%31 BLUE (LED 15 & 16)0 - 255 0% - 100%32 WHITE (LED 15 & 16)0 - 255 0% - 100%33 RED (LED 17 & 18)0 - 255 0% - 100%34 GREEN (LED 17 & 18)0 - 255 0% - 100%35 BLUE (LED 17 & 18)0 - 255 0% - 100%36 WHITE (LED 17 & 18)0 - 255 0% - 100%Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 13 Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 14

ELED QW StripChannel Value Function54 Channel Mode1 RED (LED 1)0 - 255 0% - 100%2 GREEN (LED 1)0 - 255 0% - 100%3 BLUE (LED 1)0 - 255 0% - 100%4 RED (LED 2)0 - 255 0% - 100%5 GREEN (LED 2)0 - 255 0% - 100%6 BLUE (LED 2)0 - 255 0% - 100%7 RED (LED 3)0 - 255 0% - 100%8 GREEN (LED 3)0 - 255 0% - 100%*CHANNELS 9-46 THE SAME RGBW LED PATTERN CONTINUES**THE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE 8*47 GREEN (LED 16)0 - 255 0% - 100%48 BLUE (LED 16)0 - 255 0% - 100%49 RED (LED 17)0 - 255 0% - 100%50 GREEN (LED 17)0 - 255 0% - 100%51 BLUE (LED 17)0 - 255 0% - 100%52 RED (LED 18)0 - 255 0% - 100%53 GREEN (LED 18)0 - 255 0% - 100%54 BLUE (LED 18)0 - 255 0% - 100%ELED QW StripChannel Value Function72 Channel Mode1 RED (LED 1)0 - 255 0% - 100%2 GREEN (LED 1)0 - 255 0% - 100%3 BLUE (LED 1)0 - 255 0% - 100%4 WHITE (LED 1)0 - 255 0% - 100%5 RED (LED 2)0 - 255 0% - 100%6 GREEN (LED 2)0 - 255 0% - 100%7 BLUE (LED 2)0 - 255 0% - 100%8 WHITE (LED 2)0 - 255 0% - 100%*CHANNELS 9-64 THE SAME RGBW PATTERN CONTINUES**THE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE 8*65 RED (LED 17)0 - 255 0% - 100%66 GREEN (LED 17)0 - 255 0% - 100%67 BLUE (LED 17)0 - 255 0% - 100%68 WHITE (LED 17)0 - 255 0% - 100%69 RED (LED 18)0 - 255 0% - 100%70 GREEN (LED 18)0 - 255 0% - 100%71 BLUE (LED 18)0 - 255 0% - 100%72 WHITE (LED 18)0 - 255 0% - 100%Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 15 Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 16

ELED QW StripWith this feature you can connect the fixtures to one anotherusing the powercon input and output sockets. The quantity thatcan be connected is 6 fixtures maximum. After 6 fixtures you willneed to use a new power outlet. They must be the same fixtures.DO NOT mix fixtures.ELED QW StripELED QW StripCleaningDue to fog residue, smoke, and dust cleaning the internal and externaloptical lenses must be carried out periodically to optimize lightoutput.1. Use normal glass cleaner and a soft cloth to wipe down theoutside casing.2. Clean the external optics with glass cleaner and a soft clothevery 20 days.3. Always be sure to dry all parts completely before pluggingthe unit back in.Cleaning frequency depends on the environment in which the fixtureoperates (i.e. smoke, fog residue, dust, dew).ELED QW StripTrouble ShootingListed below are a few common problems the user may encounter,with solutions.Unit not responding to DMX:1. Check that the DMX cables are connected properly and arewired correctly (pin 3 is “hot”; on some other DMX devicespin 2 may be ‘hot’). Also, check that all cables are connectedto the right connectors; it does matter which way the inputsand outputs are connected.Unit does not respond to sound:Power Cord Daisy Chain1. Quiet or high pitched sounds will not activate the unit.Fuse ReplacementFirst unplug the power. The fuse holder is located next to the powerinlets. Using a flat-head screw driver unscrew the fuse holder.Remove the bad fuse and replace with a new one.Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 19ELED QW Strip2-YEAR LIMITED WARRANTYWarrantyA. Elation Professionals® hereby warrants, to the original purchaser, Elation Professionals®products to be free of manufacturing defects in material and workmanshipfor a period of two years (730 days) from the date of purchase. This warranty shall bevalid only if the product is purchased within the United States of America, includingpossessions and territories. It is the owner’s responsibility to establish the date andplace of purchase by acceptable evidence, at the time service is sought.B. For warranty service, send the product only to the Elation Professionals® factory.All shipping charges must be pre-paid. If the requested repairs or service (includingparts replacement) are within the terms of this warranty, Elation Professionals® willpay return shipping charges only to a designated point within the United States. If theentire instrument is sent, it must be shipped in its original package. No accessoriesshould be shipped with the product. If any accessories are shipped with the product,Elation Professionals® shall have no liability whatsoever for loss of or damage to anysuch accessories, nor for the safe return thereof.C. This warranty is void if the serial number has been altered or removed; if the productis modified in any manner which Elation Professionals® concludes, after inspection,affects the reliability of the product; if the product has been repaired or servicedby anyone other than the Elation Professionals® factory unless prior written authorizationwas issued to purchaser by Elation Professionals®; if the product is damagedbecause not properly maintained as set forth in the instruction manual.D. This is not a service contract, and this warranty does not include maintenance,cleaning or periodic check-up. During the period specified above, Elation Professionals®will replace defective parts at its expense, and will absorb all expenses for warrantyservice and repair labor by reason of defects in material or workmanship. Thesole responsibility of Elation Professionals® under this warranty shall be limited to therepair of the product, or replacement thereof, including parts, at the sole discretionof Elation Professionals®. All products covered by this warranty were manufacturedafter January 1, 1990, and bear identifying marks to that effect.E. Elation Professionals® reserves the right to make changes in design and/orimprovements upon its products without any obligation to include these changes inany products theretofore manufactured.F. No warranty, whether expressed or implied, is given or made with respect to anyaccessory supplied with products described above. Except to the extent prohibitedby applicable law, all implied warranties made by Elation Professionals® in connectionwith this product, including warranties of merchantability or fitness, are limited induration to the warranty period set forth above. And no warranties, whether expressedor implied, including warranties of merchantability or fitness, shall apply to this productafter said period has expired. The consumer’s and or Dealer’s sole remedy shallbe such repair or replacement as is expressly provided above; and under no circumstancesshall Elation Professionals® be liable for any loss or damage, direct or consequential,arising out of the use of, or inability to use, this product.G. This warranty is the only written warranty applicable to Elation Professionals®Products and supersedes all prior warranties and written descriptions of warrantyterms and conditions heretofore published.Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 20

ELED QW Strip Notes ELED QW Strip NotesElation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 21 Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 22

ELED QW StripModel: ELED QW StripSpecificationsSPECIFICATIONS:Working Position: Any safe working positionVoltage*:100V ~ 240V/47~63HzLED’s:18 x 5 Watt Quad RGBW LED’sPower Consumption: 150WPower Cord Daisy Chain: 6 Fixtures Max.Fuse:3.15 AmpBeam Angle:20+50 DegreesWeight:21 lbs./ 9.5 kgs.Dimensions:40.25” (L) x 8.5” (W) x 9” (H)1019 x 210 x 226mmColors:RGBW Color MixingDMX Channels: 9 DMX Channel Modes: 1 ChannelMode, 2 Channel Mode, 4 ChannelMode, 5 Channel Mode, 7 ChannelMode, 8 Channel Mode, 36 ChannelMode, 54 Channel Mode, & 72Channel ModeWarranty:2 Year (730 days)*Auto Sensing Voltage: This fixture contains a automatic voltage switch,which will auto sense the voltage when it is plugged into the power source.Please Note: Specifications and improvements in the design of thisunit and this manual are subject to change without any prior writtennotice.Elation Professional - www.elationlighting.com - ELED QW Strip Instruction Manual Page 23©Elation Professionals®6122 S. Eastern Ave. Los Angeles, CA 90040 USATel: 323-582-3322 Fax: 323-832-9142Web: www.elationlighting.com E-mail: info@elationlighting.comA.D.J. Supply Europe B.V.Junostraat 26468 EW KerkradeNetherlandsservice@adjgroup.eu / www.americandj.euTel: +31 45 546 85 00 / Fax: +31 45 546 85 99