GSA Terrace 3.4 2.6 and Reach 43, 56, 69H Price List ... - Allsteel

AllsteelP R ICE LIS T 2013prices effective March 31Systems SupplementTerrace(ß 3.4/2.6 and Reach(ß 43/56/69HGSt\ ScheduleContract GS-28F-0001Vexpires 9-30-2013Office Furniture 71-1FSC Class 7110EINfTN 36071/079CCR Info: DUNS 120316711 Cage 01074Navy SPA NOO189 07-A-0057 expires 9-30-2013General Services AdministrationAuthorized Federal Supply ScheduleBusiness Size: Largehe internet address for GSA Advantagelis http://ww.gsa.gov.Terrace 3,4Terrace 2,6Terrace FreestandingReach 43/56/69HAlign'M StoragePersona'M StorageEssentials~ StorageExtension"-~/'"-~\,~

Systems SupplementPaint Finishes, Laminates, and VeneersPainted Metal FinishesCore ColorsBlack..........................................P27 A EBrownstone............................... P7D A EBungalow.................................. P7C A ECarob.........................................P52 A EFlint...........................................P02 A EFossil..........................................P28 A ELoft............................................P7B A EMuslin........................................P4J A EParchment..................................P93 A ESelect ColorsBrilliant White*.........................PQ8 AChampagne Metallic................. PR5 AGunmetal Metallic.................... PR3 APlatinum Metallic...................... PR2 ASilver*....................................... PR6*PR6 no upcharge on Involve; is notavailable on Stride trim for panels andtiles, Terrace, Concensys, Cadence,Reach, Align, Persona, Essentials, andvertical files. PQ8 is not available onvertical files.Paint Color IndicatorsPages in this pricer reference the followingsymbols:Core Painted Metal ColorsSELECT Painted Metal ColorsMetallic paints, due to varying reflectance, may appearto have less visual color consistency than other paintfinishes, even when L/A/B values are exactly the same.(L/A/B — measurable aspects of color — values aremaintained within a specified range, to ensure consistentappearance of paint colors.)Electrical AndData ComponentsBlack............................................E4 A EBrownstone................................. EY A EBungalow....................................EX A EFlint.............................................E9 A ELoft............................................. EV A EMuslin......................................... EU A EWhite......................................... EW ARecommended Coordinate Colors:Brilliant White use White EWCarob use Black E4Champagne Metallic use Muslin EUFossil use Flint E9Gunmetal Metallic use Brownstone EYParchment use Muslin EUPlatinum Metallic use Loft EVLaminatesGRADE L1CORE for WorksurfacesAsh.......................................... LT3B EBrownstone............................ LM13Bungalow............................... LM12Camelstone.............................LT6A A ECanyon Zephyr....................... LT5B ECharbrown Mesh.................... LT8F ADesert Zephyr.........................LT5A EFlint....................................... LM16Frosty White.......................... LM14 AGrey Mesh..............................LT8AGreystone............................... TM65 ELoft........................................ LM11Misted Zephyr........................LT5D EMuslin.................................... LM15Parchment.............................. TM20 A EPewter Mesh...........................LT8C ASheer Mesh.............................. LT8B ASilver Mesh.............................LT8D ATaupe Mesh............................ LT8E ATwilight Zephyr...................... LT5E EWhite Tigris............................LT2AWhitestone............................. TM33 A ECORE for Laminate Wood StorageSolid Colors:Brownstone............................ LM13Bungalow............................... LM12Flint....................................... LM16Frosty White.......................... LM14Loft........................................ LM11Muslin.................................... LM15Woodgrain for Worksurfaces andInvolve Laminate Wood StorageNatural Maple........................ LWD A EShaker Cherry........................LW7C A EGRADE L2Amber Cherry**................... LWACBeigewood**..........................LWBEBrazilwood**........................ LWBRColumbian Walnut**..............LWZGRADE L3 (Textured)Cafelle**..................................LWCCharcoal Walnut**.............. LWCWNatural Walnut**................LWNW**Not available on Stride tiles.LAMINATE Edge colorsAmber Cherry†...........................DABeigewood†................................. DEBlack............................................E4 A EBrazilwood†................................ DBBrownstone................................. EY A EBungalow.................................... EX A ECafelle†...................................... DGCarob...........................................E8 A ECharcoal Walnut†.......................DCColumbian Walnut†....................DZFlint.............................................E9 A EFossil...........................................EH A ELoft............................................. EV A EMuslin......................................... EU A ENatural Maple†......................... DD ANatural Walnut†........................ DNParchment...................................EN A EShaker Cherry†........................... DF AWarm Beige..................................E2 A EWhite......................................... EW A† Not available on wave edge worksurfaces.NOTE: $31 upcharge on WoodgrainT‐Mold.Additional Flat, T-Mold, andWave Edge Color for WorksurfacesPlatinum Metallic.........................EPStratawoodVeneersGrade V1Add FSC prefix to Stratawood codes listedbelow for Stratawood veneer trim onStride and Terrace DNA.Example: FSCSC777CherryBurnished Cherry............................. SC777Light Cherry..................................... SC701Natural Cherry................................. SC700Wheat Cherry................................... SC706MapleNatural Maple..................................SE800OAKClear Oak.........................................SF300Dark Rift Oak...................................SF331WALNUTCoffee Walnut...................................ST615Dark Roast Walnut...........................ST684Light Walnut.....................................ST601Sumatra Walnut................................ST693Natural Veneers —Natural–1Grade V3CherryBurnished Cherry............................ NC777Cinnamon Cherry***..................... NC260Dark Red Cherry***....................... NC511Expresso Cherry.............................. NC498Light Cherry.................................... NC701MediumBrown Cherry................................. NC215MapleHoney Maple...................................NE873Natural Maple***...........................NE800***Concensys top caps and end capsavailable in only these 3 veneers.Natural Veneers —Natural–2Grade V5Dark Rift Oak.................................. RF331Medium Rift Oak............................. RF357Horizontal surfaces to be full‐fill,ClearTech ® finish.CleargrainVeneers !Grade V3CherryBurnished Cherry.............................CC777Cinnamon Cherry............................CC260Dark Red Cherry..............................CC511Light Cherry.....................................CC701MediumBrown Cherry..................................CC215MapleHoney Maple...................................CE873Natural Maple.................................CE800The beauty of wood is the natural variation of grainpatterns and colors that make each piece unique. Thisvariation is also influenced by lighting conditions,orientation of mated parts, and varying acceptance ofthe finishing process. The varying colors and physicalcharacteristics naturally occur in all wood species butare most pronounced in lighter colored woods, and areespecially evident in natural finishes.Metal Storage PullsBlack............................................E4 EBronze (for veneer only).............. EZMatte Silver..................................EL A ELAMINATE AND PaintedWood Storage PullsSilver......................................... PR6Metal Grommetsfor Laminate and Fluid FormWorksurfacesOval/Square:Matte Silver..................................ELfor Veneer WorksurfacesOval:Black............................................E4Bronze......................................... EZMatte Silver..................................ELSquare:Matte Silver..................................ELPlastic GrommetsFor WorksurfacesBlack............................................E4 A EBrownstone................................. EY A EBungalow....................................EX A ECarob...........................................E8 A EFlint.............................................E9 A EFossil...........................................EH A ELoft............................................. EV A EMuslin......................................... EU A EParchment...................................EN A EWarm Beige..................................E2 A EWhite......................................... EW APlastic Grommets withWoodgrain EdgeIf woodgrain edge is specified, the plasticgrommet color is predetermined, based onfinish selection.Beigewood and Natural Maple — MuslingrommetsAll other woodgrain options — BlackgrommetsGrommets onVeneer WorksurfacesWire management grommets comestandard on most veneer worksurfaces.Choose between metal or plastic grommetoption. Note: Plastic grommet color ispredetermined based on finish selection.All Maple veneers — Muslin grommetsAll other veneers — Black grommetsLocksBlack............................................... E4Matte Silver.....................................ELNOTE: Refer to individual product pagesfor upcharges.E! De-emphasizedA Available in Everyday Advantage ® .E Available in Express Solutions ® .

Systems Supplement• Prices are subject to change without notice. All orders are subject toprices in effect at the time of order.• Software packages furnished by Allsteel or by another source whichsupport the sale of Allsteel products are superseded by printed pricelists.• Ordering information appears at the bottom of each product pagecomplete with examples on how to specify.Terrace ® 3.4/2.6 and Reach ® 43/56/69HPrices Effective March 31, 2013• This publication is available in PDF format on Allsteel SynergyWebsite where any updated pages are posted.• Specification information and pricing information for Stride ,Terrace DNA , and Concensys ® Systems, along with 50"/65"HReach, Involve , and Allsteel’s complete line of storage products areall located in the new Systems Specification Guide and Price List.Table of Contents...............................................................................................3New, Revised, De-Emphasized, and Discontinued Products..............................4Lifetime Warranty..............................................................................................5COM Policy....................................................................................................6-7Specials ..............................................................................................................8Replacement Parts ...........................................................................................10ClearTech Care Instructions.............................................................................11TERRACE 3.4/2.6 AND FREESTANDINGWorking with Terrace.................................................................................13-17Terrace 3.4Working with Terrace 3.4 Frames and Connectors ....................................18-23Working with Terrace 3.4 Tiles ..................................................................24-29Terrace 3.4 Frames .....................................................................................30-35Terrace 3.4 Connectors...............................................................................36-54Terrace 3.4 Tiles .........................................................................................56-81Service Kit........................................................................................................82Terrace 2.6Working with Terrace 2.6 ................................................................................84Working with Terrace 2.6 Frames and Connectors ....................................85-91Working with Terrace 2.6 Tiles ..................................................................92-95Terrace 2.6 Panels.......................................................................................96-97Terrace 2.6 Frames ...................................................................................98-101Terrace 2.6 Connectors and 2.6 to 3.4 Connectors................................102-117Terrace 2.6 Tiles .....................................................................................118-139Electrical and Data ......................................................................................140-162Worksurfaces and SupportsWorking with Worksurfaces and Supports.............................................164-169Worksurfaces ........................................................................................170-181Altitude Tables .......................................................................................182-1879120 Non-Standard Worksurface Program............................................188-189Countertops/Shelves ...............................................................................190-193Worksurface Supports ............................................................................194-198Wall Track Kits ..............................................................................................199Terrace FreestandingWorking with Terrace Freestanding........................................................200-205OVERHEADS AND HUTCHESOverheads Features and Benefits ...................................................................206Overheads Overview .....................................................................................207Working with Overheads .......................................................................208-209Overheads for Terrace ............................................................................210-215Hutches for Terrace Freestanding...........................................................216-221Tasklights and Accessories......................................................................222-224REACH 43"/56"/69"H FOR CONCENSYS & TERRACE 3.4/2.6 DOverview of Reach Storage Units...........................................................225-238Reach Storage Units ...............................................................................239-269Wardrobe Cabinets ........................................................................................270Landscape Doors....................................................................................271-272Accessories.....................................................................................................273Reach Frames, Panels, and TilesTerrace 2.6 Frames, Metal Ends, Connectors,Tile Attachment Kits, and Tool Tiles for Reach......................................274-277Terrace 3.4 Frames, Metal Ends, Connectors, Segment Kits,and Tool Tiles for Reach ........................................................................278-281Concensys Panels, Metal Ends, Connectors, Tiles,and Tile Attachment Kits for Reach .......................................................282-286Electrical and Data ......................................................................................288-293Worksurfaces and SupportsWorking with Worksurfaces and Supports.............................................294-297Worksurfaces and Storage Unit Tops......................................................298-305Terrace Brackets and Supports.......................................................................306Concensys Brackets and Supports..................................................................307PERSONAL STORAGEOverview of Storage...............................................................................308-309Align StorageAlign Pedestals — Metal................................................................................310Align Personal Files — Metal.........................................................................311Align Personal Towers — Metal ...................................................................312Persona StoragePersona Pedestals ...........................................................................................313Persona and Align Pedestal Tops and Accessories ..................................314-315Essentials StorageEssentials Pedestals.................................................................................316-317Essentials Personal Files and Towers..............................................................318Essentials Tops and Accessories .....................................................................319LATERALS AND SHARED STORAGEOverview Laterals and Shared Storage ..........................................................320Align Laterals — Metal .................................................................................321Persona Laterals .....................................................................................322-323Essentials Laterals..........................................................................................324Lateral File Accessories..................................................................................325Lateral Tops............................................................................................326-327EXTENSIONSWorking with Extensions...............................................................................328Organization ..........................................................................................329-333Ergonomics.............................................................................................334-335Illumination............................................................................................336-339APPENDIXLocking Specifications............................................................................340-342Fabric Grades 7-9 and Upholstery Grades J-Z .......................................343-345Index by Model Number........................................................................346-354D Discontinued 12/31/2013© 2013, Allsteel Inc. Allsteel is a registered trademark.Systems Supplement – 3/2013 allsteeloffice.com | 3

Lifetime WarrantyAllsteel Inc. warrants its products to be freefrom defects in material and workmanshipfor as long as the original purchaser ownsthem, except as set forth below.Allsteel shall repair or replace withcomparable product (at Allsteel’s discretion),free of charge, any Allsteel product orcomponent manufactured after August 6,2012 that fails under normal commercialoffice use.This warranty is subject to the followingprovisions:Some natural variations occurring in wood,leather, or other natural materials are inherentto their character and not considered defects.Allsteel does not warrant the colorfastnessor matching of colors, grains, or textures ofthese materials. Additionally, a Customer’sOwn Material (COM) selected by, and used atthe request of, a user is not warranted.The materials and components listed beloware covered according to the followingschedule from the date of sale: (lamps and ballasts are not covered),seating controls, pneumatic cylinders,glides, casters and polymer-basedcomponents, and foam — 12 Years ®AutoFit ® technology, and laminates —10 Years tablet arm mechanisms, interior woodframedseating and lounge products,occasional tables, Scout ® mesh, paneland seating upholstery fabrics, and othercovering materials — 5 Years Gather products — 3 years ® , Access , Acuity ® , Sum, Relate ® ,Trooper ® asynchronous and synchro-tilt , and Inspire arewarranted for multiple shifts and usersup to 300 lbs. All other Allsteel chairs andcomponents are warranted for single-shift, material, is warranted for as long as theoriginal purchaser owns the chair. mesh/carriers are considered structuralchair components and as such arewarranted for as long as the originalpurchaser owns the chair. LED undercabinet light — fixture for3 years; power supply for 1 year LED light — 5 years LED Lighting — fixture for 5 years;power supply for 3 years Moving parts such as door hardware anddoor mechanisms — 5 years. Customer’sown hardware — supplier warranty.This warranty does not apply to: ownership including fabric puddling product not approved by Allsteel in accordance with product instructions andwarnings which is handled under separate terms possible, will pass through to the originalpurchaser (and process claims under)any warranty provided by manufacturersof under-cabinet lighting, ergonomicsupplied by Allsteel.TO THE EXTENT ALLOWED BYLAW, ALLSTEEL MAKES NO OTHERWARRANTY, EITHER EXPRESS ORIMPLIED, INCLUDING ANY WARRANTYOF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE.ALLSTEEL WILL NOT BE LIABLE FORANY CONSEQUENTIAL OR INCIDENTALDAMAGES.This warranty applies only to products soldCommonwealth of Canada. Your AllsteelDealer is our mutual partner in supportingyour warranty requests. To obtain serviceunder this warranty please contact yourAllsteel Dealer.Systems Supplement – 3/2013 allsteeloffice.com | 5

COM PolicyCOM ProgramAllsteel understands that customers may at times want to specifyfabrics outside of Allsteel’s standard fabric offering. Our COMprogram was designed to make specifying COMs on Allsteelproducts a simpler, friendlier, and hassle-free process. Thisprocess is simple and easy to use, and is described below under“Allsteel to Supply.” If a Dealer wishes to manage the COMprocess themselves, they can do so by following guidelines under“Dealer to Supply”. Find out more about Allsteel’s COMprocess by emailing our COM Department atASICSCOM@allsteeloffice.com.Allsteel to Supply:1. Select the fabric you wish to use and check the TailoredSolutions Application on Synergy. You need the COMsupplier’s name, fabric pattern name, and color name tosearch for approved fabrics.2. If your fabric is listed as an approved fabric, you may placeyour order directly with Allsteel Customer Support. Pleaseuse the fabric code (e.g., S216426XP) from the TailoredSolutions Test Request on your order in the place of thestandard fabric code. Make sure to mark on the top of theorder “Allsteel to Supply.” If your fabric is not listed asapproved, you will need to complete a COM Test Request onTailored Solutions. Allsteel will arrange to obtain test fabricand you will be notified of the results within 3 to 5 workingdays of receipt of the test yardage by Allsteel.3. If the fabric is approved, you will receive an email summaryfrom Tailored Solutions with the correct price grade andfabric code for order purposes. Written COM price quoteshold pricing for 90 days after issue date.4. Once the fabric has been approved by Allsteel, enter yourorder directly with Allsteel Customer Support. Allsteel willpurchase all COM fabric directly from the COM suppliersand schedule for production.In the event that the Dealer decides to cancel a COM fabricorder, the Dealer is responsible for the cost of the fabric plusa handling charge that is equal to 10% of the fabric cost.GSA Reference PageDealer to Supply:1. Select the fabric you wish to use and check the TailoredSolutions Application on Synergy or call Allsteel CustomerSupport to see if the fabric you have chosen has already beentested and approved on the product you are interested in.You need to have the COM supplier’s name, fabric patternname, and color name for this inquiry.2. If your fabric is listed as approved, you may estimate theyardage required by using Allsteel’s COM Calculator onTailored Solutions.3. If your fabric is not listed as already tested and approved,you will need to complete a COM Test Request on TailoredSolutions. You will need to arrange for the test fabric to besent to:Panel and Seating Test Fabric:Allsteel Inc.Attn: COM DepartmentDock Doors 46-483000 North Hwy 61Muscatine, IA 52761Allsteel requires 3 yards of fabric for each panel system fabricbeing tested and 1 yard of fabric for all seating testing. Makesure to include two memo samples for each fabric to be testedwith the test fabric. You will be notified of the test resultswithin 3 to 5 working days of receipt of the test yardage byAllsteel.4. Place your order directly with Allsteel Customer Support.Make sure to mark on the top of the order “Dealer toSupply.”5. All “Dealer to Supply” orders will be charged Grade Bpricing for seating and Grade 2 pricing for panels. Dealerswill pay for the COM fabric separately.6. All “Dealer to Supply” fabric must be sent on a fabric roll.6 | Systems Supplement – 3/2013

COM Policy7. Place your fabric order directly with the COM Supplier withinstructions for the fabric to be sent on a fabric roll to:HNI Fabric Distribution Center — Dealer PO NumberCOM Production YardageDocks 2-43000 University DriveMuscatine, IA 52761Information that MUST be included in the packing slipattached to the fabric:1. Dealer’s Purchase Order number to Allsteel2. Allsteel’s Tracking number for the COM fabric3. Dealer Name4. Yards of FabricIf the fabric shipment does not match the correct fabric andyardage, Allsteel will notify the Dealer for resolution.If Allsteel receives fabric with incorrect labeling that cannotbe linked to an Allsteel furniture order, Allsteel will hold thefabric for up to 7 days, while the COM Expeditor attemptsto identify the order. After 7 days, Allsteel will return thefabric to sender. There are no exceptions to this policy.Any cancelled orders are subject to cancellation charges up tothe full value of the Allsteel product cancelled. Allsteel willdetermine the actual cancellation charge at the time thecancellation is requested.Additional Policy Information:The company assumes no responsibility for the overallappearance, flammability, normal durability, colorfastness, orany other quality standards. The Company reserves the right toreject a COM if the quality of the COM is not satisfactory forthe product. Should this occur, the customer will be notified withan explanation within 7 working days of receipt of testmaterials.GSA Reference PagePurchase orders will not be accepted or entered unless the testingprocess is complete with positive results.If all testing has been previously completed, re-testing is onlynecessary if fabric is to be used on a different product, or patterndirection has changed from that previously approved.Previous test results can be obtained by a customer on theTailored Solutions Application or by calling Allsteel CustomerSupport.COM testing will require 3-5 working days from receipt of testyardage.FOR SEATING: FOR PANELS: FOR TACKBOARDS AND TILES:Railroaded Pattern Cut Railroaded Pattern Cut Railroaded Pattern CutBACKRAILROADEDSEATBACKPATTERN CUTSEATUPRAILROADEDUPPATTERNCUTRAILROADEDAll COM fabric will be applied to seating and panel systemsPattern Cut unless Railroad Cut is requested and approved onthe COM Test Request in Tailored Solutions. Any fabricsapproved as a width pass, the dealer is responsible for clarifyingRailroad Cut on orders containing items that are too large tosupport the Pattern Cut of a fabric application (any items largerthan 48" high or wide).Fire RetardantThe Dealer is responsible for ensuring that the COM fabric iscertified to meet all flame retardant requirements.For more information please contact Allsteel Customer Support.UPPATTERNCUTUPThe company is not responsible for fabric that has becomeobsolete at the COM supplier, that is of poor quality, or that isdelivered late to the manufacturer from the COM supplier.Excess yardage will be disposed of at Allsteel’s discretion.All cancellations or changes to COM orders are subject toCompany approval. Because of the nature of COM, specialfabrics, finishes, and structural modifications, products orderedas specials and then cancelled prior to shipment are subject tocancellation costs up to the full value of the product cancelled.The company determines the actual cancellation charge at thetime the cancellation is requested. Upon approval, a cancellationnumber is issued to the Customer.Systems Supplement – 3/2013 allsteeloffice.com | 7

Allsteel Special Paint, Stain and Laminate PoliciesSpecial Paint & Stain PolicyAllsteel at its own discretion may modify its standard productswith non-standard paint and stain colors to meet specific needs.Dealer is required to submit a special paint or stain request viathe Tailored Solutions Application on Synergy. A sample of thenon-standard paint or stain color desired will be required formatching. Pricing, lead time, and order information will beprovided at the time of approval.• For each new requested stain or paint, there will be a $500 netfee to cover supplier costs to match the special item.• For existing, previously approved stains or paints, there is no$500 matching fee, however, there is a sample chip fee of$175 net for stains and $100 net for paints.• Samples, preferably at least 3" x 5" chips, of the exact colordesired should be sent to the Allsteel Tailored ProductsGroup. Paint matches require (3) sample chips and stainmatches require (3) sample chips. Please mail these samplechips to the address below and reference the Special ItemRequest Number from Tailored Solutions.Allsteel Inc.Attn: COM DepartmentDock Door 46-483000 North Hwy 61Muscatine, IA 52761• Color changes will occur over time when wood is exposed tolight. For this reason, when new product is ordered as anaddition to existing product, there will be color variancesbetween the old and new product. Please remember whenspecifying new product that although the species of veneerwill be the same, additional product is being manufacturedfrom a different tree. It may take several months for the newfurniture to mature to the color level of existing product. Evenwith this maturation process the additional product will notbe an exact match.Special Laminate PolicyThe Company at its own discretion may modify its standardproducts with non-standard laminates to meet specific needs.Contact the Allsteel Tailored Products Group for pre-approvedWilson Art laminates and pricing for special laminates. Whenrequesting a special laminate please supply manufacturer, alongwith name and pattern number of laminate.• Extended lead times will apply on orders containing speciallaminates.• Due to manufacturing techniques, materials, and qualityissues, some product exclusions will apply and some requestsmay be declined.• Allsteel will color match the sample and send control samplesto the address provided in the request. Dealer will reviewAllsteel’s color match and approve by signing the back of thesample chip. Send the signed sample back to the AllsteelTailored Products Group.• Product pricing for all special paints falls under the SelectPaint price grade.• Orders will not be accepted until Allsteel receives the Dealer’swritten approval on the color match.• Extended lead times will apply on orders containing specialpaints or stains.• Due to manufacturing techniques, materials, and qualityissues, some exclusions will apply and some matches may bedeclined.Important Notes• Natural veneer is subject to nature’s quality control.Differences in grain and color are naturally occurringvariations and cannot be controlled by the manufacturer andcannot be considered as product defects. Natural veneer hasthe characteristics and beauty of a living organism; with itsown variations of grain, growth, and color patterns. For thesereasons, Natural veneer is preferred by many for its warmthand personal characteristics.8 | Systems Supplement – 3/2013

Systems SupplementAllsteel Replacement PartsReplacement Parts Order FormPlease complete all banks for each appropriate section. Asterisk (*) is required information.Date*Dealer Account #*(CC#)Dealer Name*Contact Name*ContactPhone Number*Contact EmailContact FAX #Mark forShip to Name*Ship to Address*Ship to AddressCity, State, Zip*Traffic Name*Replacement PO #*Installation DateRequestedDelivery DateShip MethodTrafficPhone Number*Ordering HintsAdd-ons/Mis-specified product — order as cataloged items onSynergy or your ordering system. Do not use this form.Replacement parts order must be faxed or emailed to AllsteelCustomer Support.Please alert CS of any special expedite requirements. Fees may apply.Replacement parts orders are usually shipped within 5 days.Punchlist and/or parts orders for projects should be sent to theAllsteel Project Coordinator assigned to the project.Reason for Replacement(apply appropriate reason number to each line)1 Shortage *Shipping order number required below.Always billable with credit pending POD.Must be reported within 30 days of delivery.2 Freight Damage *Please provide serial number. Must be reportedwithin 30 days of delivery date if shipping to awarehouse or 15 days if shipping direct to site.3 Non-conforming *Please provide serial number.Product4 Billable Purchase order number is required. Replacementparts are net priced (no discounting). *Freight willbe invoiced if order is billable. Order finishedgoods (cataloged items) electronically on Synergyor your operating system.QtySerial NumberModel Number(complete with options)Part Number(if known)Description ofPart NeededOriginal ShippingOrder #Reason#Description ofDamage/ProblemEMERALD email — csemeraldteam@allsteeloffice.com EMERALD fax — 800-492-3863PEARL email — cspearlteam@allsteeloffice.com PEARL fax — 800-492-3863RUBY email — csrubyteam@allsteeloffice.com RUBY fax — 800-492-3863ALIGNED email — csalignedteam@allsteeloffice.com ALIGNED fax — 800-707-5564NOTE: This form is also available on the Allsteel Synergy website.10 | Systems Supplement – 3/2013

ClearTech ® Care InstructionsClearTech ® Finishing System: Veneer worksurfaces by Gunlockefeature the ClearTech ® Finishing System. The ClearTech ® FinishingSystem is a process that begins with the application of dye-basedNGR stains, which promote exceptional depth and clarity. Nextthe worksurface receives a specialized coating of polyacrylic andurethane resins cured by ultraviolet light. The result is a full-filled,45 sheen finish with exceptional durability and chemicalresistance. The remaining surfaces receive an application ofcatalyzed lacquer top coat, which results in a semi-filled, 45 sheenfinish. These finishing processes ensure depth, clarity, colorconsistency and durability throughout the product.GSA Reference PageThe Benefits of ClearTech ®ClearTech ® is an environmentally friendly process. Thisfinishing system emits one third of the VOCs (Volatile OrganicCompounds) in comparison to conventional processes.Polyacrylic resins are recovered and recycled when theClearTech ® process is used.Utilizing the ClearTech ® finish, your veneer worksurfaces haveexceptional resistance to:• Heat and moisture (hot beverages, pizza boxes)• Chemicals (liquid paper, nail polish)• Stains (permanent markers)• Scratches and impact (everyday wear and tear)Caring for your ClearTech finish:• General maintenance procedures entail wiping clean theentire surface with a clean, water dampened soft cloth onceper week (be sure to wipe with the grain)• Murphy’s Oil Soap may be used as a general purpose typecleaner with warm water to clean tops.• The finish may also be polished with Guardsman FurniturePolish (contains no waxes or silicones) to provide renewedluster.• Be sure to wipe up all spills immediately. Do not allow spillsto dry.Wood owes its inherent beauty to variations in color, grain andtexture, and therefore, these variations are not considereddefects. There may be minor variations from one piece offurniture to the next even though they are finished at the sametime. Exposure to light and the aging process will cause adarkening of natural wood products. Light finishes on woodproducts do not mask the natural characteristics of wood.Allsteel does not guarantee the exact matching of grain,pattern and color.Systems Supplement – 3/2013 allsteeloffice.com | 11

Notes12 | Systems Supplement – 3/2013

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETerrace ® 3.4/2.6FeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitPanel Tiles on 3.4 located behind worksurfaces at29 1 ⁄2"H may be removed and replaced in mostapplications without removing worksurfaces.Panel Tiles located behind worksurfaces are easy toremove and replace, making reconfiguration oraddition of concealed wiring simple and quick.Any base frame will accept stacking frames.Flexibility in specification. Simplified installation,reconfiguration and inventory management. Stackingframes can be added after the project has beeninstalled without investing in new base frames.Base and stacking frames combine for additionalheight.More privacy can be achieved with higher panels.Panel frames are available in six widths (24"–60"W).Design flexibility.ADA-compliant 36" wide door / 42" wide framehave optional lever style handle (ordered separately).Supports most ADA requirements.Stacking panels can typically be added or removedwithout affecting adjacent panels or workstations.Panel heights can be easily and quickly increasedwithout disrupting workstation, lowering the costs ofreconfiguration.Terrace 3.4 with Radius TrimFeatureBenefitFeatureBenefitWorking with FramesGSA Reference PageIf you are adding to Terrace 3.4 product installed prior to1/99, contact Allsteel Customer Support for compatibility ofproduct to be configured with original Terrace.Panel widths are nominally sized. Terrace 3.4 profilepanels are 3 3 ⁄8" thick, connectors are 3 1 ⁄2" thick.Terrace 2.6 panels are 2 5 ⁄8" thick, connectors are 2 3 ⁄4"thick.No panel “creep” or unanticipated dimensionalgrowth in the plan. Floor space is optimized.Frame construction features welded, tubular slottedsteel vertical members, with formed steel horizontalmembers.Frame construction provides maximum weight loadcapability. Frames are extremely strong.14 | Systems Supplement – 3/2013

Terrace ® 3.4/2.6Working with FramesFeatureBenefitStandard fabric-covered tiles are acoustical andtackable.Simplified specification, installation, reconfigurationand inventory management. Costs are kept to aminimum.FeatureBenefitGSA Reference PageSlots are in 1" increments in the vertical slottedchannels in every frame.Vertical slotted channels allow hang-on componentsto be adjusted vertically in 1" increments.TERRACEFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitSteel segment kits for 3.4 panels are separatelyspecified and can be retrofitted to existing panelframes.Segment kits make panels easy to reconfigure andprovide an updated design for existing installations.Segmenting provides the aesthetic effect of stackingwithout the cost, and allows for customization withinthe workstation.Glides can be adjusted from interior of frame usingstandard quarter-inch hex driver.Provides ease of installation.Wide variety of tiles, including tackable acoustical,tackable super acoustical (3.4 only), glass, veneer,steel, mesh, marker board and acrylic resin.Both visual design and function can be tailored tomeet the demands of the project, and customizedwithin individual workstations.Panel tiles have factory-installed steel clips that fastenthe tiles securely onto the steel panel frames.Tiles are exceptionally easy to attach. Tiles can beeasily removed in the field without disruptingadjacent panels for cleaning. Terrace 3.4 provideseasy access to wire management within the panel.All panels/frames are standard withlay-in wire management capability inboth top channel and base pathway.Lay-in capability saves timeand money duringinstallation andreconfiguration.FeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitEach frame comes standard with large interior panelwire chase.Provides substantial space for generous bend radii forCAT 3, 5, 5E, 6, and fiber optic cables.Direct in-line, panel-to-panel fastening.Frames self-align, allowing the entire panel run to beleveled. Consistent reveals create a crisp, architecturaleffect.Hinged beltline tiles on 3.4 panels provide access toconcealed electrical and data receptacles.Clean, uninterrupted visual design.Glass tile kits available.Allows for visual contact in the workplace, whilemaintaining a measure of acoustical privacy.TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGTerrace 3.4 with Flat TrimSystems Supplement – 3/2013 allsteeloffice.com | 15

Terrace ® 3.4/2.6Terrace Natural 1 and Cleargrain VeneerFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETerrace Natural 1 and Cleargrain VeneerWood owes its inherent beauty to variations in color, grain andtexture, and therefore, these variations are not considereddefects. There may be minor variations from one piece offurniture to the next, even though they are finished at the sametime. Exposure to light and the aging process will causedarkening of natural wood products. Light finishes on woodproducts do not mask the natural characteristics of wood.Therefore, Allsteel does not guarantee the exact matching grain,pattern and color.Terrace 3.4 and 2.6 veneer tiles and trim are offered in bothCleargrain in 7 finishes (composite) and Natural 1 veneer in 8finishes. (See inside front cover for finishes.) These products arefinished with a catalyzed lacquer, semi-fill, which offers excellentscratch, stain, and abrasions resistance, plus a high level ofclarity.Terrace 3.4 and 2.6 Cleargrain and Natural veneer worksurfacesare protected by one of the world’s most advanced woodcoatings, the ClearTech ® finishing process, a full-fill finishapplied by state-of-the-art equipment. The polyacrylic andurethane resins feature a high-solids formula that meets theEPA’s stringent requirements for VOC emissions and air quality.Cured in a specially designed ultraviolet oven, these resins fuseto the wood, forming a durable shield that provides the ultimatein scratch, stain, chemical, and heat resistance for these highwearsurfaces. The jewel-like clarity and depth allow the naturalbeauty of the wood to glow through. Find out more aboutClear-Tech and its advantages on page 17.Cleargrain Veneer Vs Natural Veneer. Which is best foryou?Cleargrain and Natural veneer have similarities and differences.Both options provide a wood surface. Exposure to light willcause both options to darken. Both Cleargrain and Naturalveneer will be a stylish addition to any specification. Howeverthe look, feel and process for Cleargrain and Natural veneer aredifferent.Cleargrain VeneerCleargrain veneer features a repeatable straight-grain pattern,absent of the cathedrals seen in Natural veneer. Although slightdifferences in tone should be expected, the Cleargrain patternwill maintain a consistent appearance across all products.Cleargrain veneer is an engineered wood veneer enhanced bytechnology for consistency in both color and grain patternresulting in very few defects.Cleargrain VeneerAlthough exposure to light will cause Cleargrain veneer todarken slightly, additional orders at later dates will matchexisting product pattern and will match the color when matured.This creates a smooth process for adding on to existinginstallations.Natural VeneerNatural veneer is subject to nature’s quality control. Differencesin grain and color are naturally occurring variations and cannotbe controlled by the manufacturer and cannot be considered asproduct defects. Natural veneer has the characteristics andbeauty of a living organism; with its own variations of grain,growth, and color patterns. For these reasons Natural veneer ispreferred by many for its warmth and personal characteristics.Color changes will occur over time when wood is exposed tolight. For this reason, when new product is ordered as anaddition to existing product, there will be color variancesbetween the old and new product. Please remember whenspecifying new product that although the species of veneer willbe the same, additional product is being manufactured from adifferent tree. It may take several months for the new furnitureto mature to the color level of the existing product. Even withthis maturation process the additional product may not be anexact match.When ordering Natural Veneer tiles for Terrace 3.4 or 2.6frames please refer to page 78 (Terrace 3.4) or page 136 (Terrace2.6) for information. Natural tiles sets must be ordered to ensuregrain pattern matching. All panels with two or more continualnatural veneer segments will need to be ordered as a set and willbe grain matched for consistency. These tile sets must remaintogether throughout the manufacturing and installation process.Natural veneer worksurfaces may exhibit a color variancebetween the surface and the edge detail or when butted togetherat a 90 degree angle. This natural phenomenon is calledpolarization (or grain flip) which alters the color and appearanceof adjacent worksurfaces with grain running perpendicular. Theappearance of wood veneer may change slightly depending onwhat angle it is viewed from although it is most often noticed onworksurfaces installed at 90 degree angles to each other. Foryour guidance, please see illustrations within the worksurfacesection (pages 164-193) when specifying for an understanding ofgrain direction in your installation.Natural 1 Veneer16 | Systems Supplement – 3/2013

Terrace ® 3.4/2.6Terrace Natural 1 and Cleargrain VeneerClearTech Finishing System for WorksurfacesThe ClearTech Finishing System is a process that begins with theapplication of dye-based NGR stains, which promoteexceptional depth and clarity. Next the worksurfaces receives aspecialized coating of polyacrylic and urethane resins cured byultraviolet light. The result is a full-filled, 45 sheen finish withexceptional durability and chemical resistance. The remainingsurfaces (veneer tiles and storage fronts) receive an applicationof catalyzed lacquer top coat, which results in a semi-filled, 45sheen finish. These finishing processes ensure depth, clarity,color consistency and durability throughout the product.The Benefits of ClearTechClearTech is an environmentally friendly process. This finishsystems emits on third of the VOCs (Volatile OrganicCompounds) in comparison to conventional processes.Polyacrylic resins are recovered and recycled when the ClearTechprocess is used.Utilizing the ClearTech finish, your product has exceptionalresistance to:• Heat and moisture (hot beverages, pizza boxes)• Chemicals (liquid paper, nail polish)• Stains (permanent markers)• Scratches and impact (everyday wear and tear)Radius Veneer Top Capsfor frames(3.4 — pages 30-31; 352.6 — pages 98-99)Veneer FrontPersonal Towers/Files(Systems Specification Guideand Price List)Veneer Power Pole(3.4 — page 157; 2.6 — page 158)Veneer Worksurfaces(pages 170-187)Veneer Door FrontOverheads and Hutches(pages 215 and 220)Veneer Front Pedestals(Systems Specification Guideand Price List)Veneer Mobile Pedestal Tops(Systems Specification Guideand Price List)Caring for your ClearTech finish:• General maintenance procedures entail wiping clean the entiresurface with a clean water dampened soft cloth once perweek. (Be sure to wipe with the grain.)• Murphy’s Oil Soap may be used as a general purpose typecleaner with warm water to clean tops.• The finish may also be polished with Guardsman FurniturePolish (contains no waxes or silicones) to provide renewedluster.• Be sure to wipe up all spills immediately.Veneer on Terrace 3.4 and 2.62 Different Veneer TypesNatural veneer is subject to nature’s quality control. Eachspecimen will exhibit differences in grain pattern and tone. Thisis to be expected, and, in fact contributes to the individuality ofeach product.Cleargrain veneer features a straight-grain pattern, absent ofthe cathedrals seen in natural veneer. Although slight differencesin tone should be expected, the Cleargrain pattern will maintaina consistent appearance across all products.8 Veneer Finish OptionsNatural 1 veneer is available in the following 8 finishes andCleargrain in all but Expresso Cherry:• Burnished Cherry • Honey Maple• Cinnamon Cherry • Light Cherry• Dark Red Cherry • Medium Brown Cherry• Expresso Cherry • Natural MapleVeneer Front Laterals(Systems Specification Guideand Price List)Veneer Lateral Tops(pages 326-327)Veneer Tiles / Natural Tile Sets(3.4 — Tiles pages 76-77; Tile Sets 78-81)(2.6 — Tiles pages 134-135; Tile Sets 136-139)Veneer Connectors and Trim(3.4 — pages 46-53)(2.6 — pages 108-117)TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 17

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFrames & ConnectorsConstruction and FeaturesSpecifications—Welded, tubular, steel vertical members, with formed steel horizontal members arewelded into a strong, sturdy structural panel frame. Panel frames are shipped with top cap andbase pathway covers installed. Panel tiles are ordered separately with several choices ofapplications. Panel frames are black. Top cap, base pathway cover and connector trim areavailable in your choice of fifteen colors. Top cap options include flat painted, radius painted orradius veneer.Top caps are standardwith any base panelframe.Optional horizontalmembers can be added at13" increments forincreased electricalcapacity and aestheticvariations.Beltline areaaccommodates electricalpower and providesdesktop access to dataand commu ni ca tioncables.Openings in the side ofuprights accommodatea large volume of datacabling and electrical.Lay-in base pathwayaccepts voice, data andfiber optic cable, as wellas electrical system.Leveling glides provide3" of adjustment and areaccessible from theinterior of the frame.To convert the Panel TrimOption of an existing panelconfiguration, contactCustomer Support forspecification instructions.1-888-ALLSTEELTerrace 3.4 — Working with FramesLay-in top pathwayaccepts data cables.Panels (frames and tiles)are 3 3 ⁄8" thick (use 3 1 ⁄2" tocalculate inter sections inlength of panel run).Frames are black in color.Stacking frames areavailable in 13" and 26"heights.Cable organizers(optional) keep cablesorderly as they are routedthrough panels.Steel horizontal membershave vertical cable andelectrical routing capacityat multiple locations.Structural panel framesare available in 30", 43",56", 69" and 82" nominalheights.Base pathway cover hasoutlet openings thataccept duplex receptaclesor commercially avai lablemodular data faceplates.GSA Reference PageTop caps are provided withstructural panel frames. Whenadding stacking frames,remove the top cap from thestructural frame, and installit on top of the uppermoststacking frame.Stacking connectionprovides a solidmetal-to-metal connection,allowing the stacking frame toaccept hang-on compo nents,per Allsteel configurationguidelines.18 | Systems Supplement – 3/2013

Frames & ConnectorsFrame Dimensions (Actual)Thickness: 3 3 ⁄8" (use 3 1 ⁄2" to calcu late intersections in length ofpanel run)Widths: 24", 30", 36", 42", 48", 60"Heights*: Flat Painted trim: 30 1 ⁄4", 43 1 ⁄4", 56 1 ⁄4", 69 1 ⁄4", 82 1 ⁄4"Radius trim: 30 1 ⁄4", 43 7 ⁄8", 56 7 ⁄8", 69 7 ⁄8", 82 7 ⁄8"Stacking Frames: 13"H and 26"HLeveling Glides: 3" range*with levelers fully retractedBuilding vertically with Terrace framesStacking frames canbe added to the top ofa 30"H straight basepanel frame up to82"H, added to43"H and 56"Hstraight base panelframes in anycombination up to95"H, and added tothe top of 69"H and82"H straightstructural panel82"H95"H30"H 43"H 56"H108"H69"H 82"Hframes. Do not combine differing frame widths in a single stack.Stacking frames cannot be used as base frames. Tile options forstacking frames are given on page 26. Guidelines for usingoverhead storage with stacking frames are given on page 209.A 42"W stacking frame can be positioned above a panel doorby attaching it to adjacent frames positioned at the same heighton each side of the door. The stacking frame above the paneldoor does not attach directly to the panel door. Componentscannot be hung from this stacking frame.Terrace 3.4 — Working with FramesGSA Reference PageBuilding horizontally with Terrace framesImportant planningguide lines: For adequatestability, one of twomethods of stabiliza tionmust be adhered to:Return PanelsParent Run48" min./144" max.Return PanelsMethod 1—Opposingreturns: A parent run mustbe a mini mum of 48"Wand a maximum of 144"Wbetween return panels. Theparent run must have aminimum of two returnpanels running in opposingdirections on each end ofrun.Parent Run48" min./144" max.Two Return Panels60" Min. Combined LengthReturn Panels must havecombined length 60% of parent runMethod 2—Single-sidedreturns: A parent run mustbe a mini mum of 48"Wand a maxi mum of 144"Wbetween return panels. Theparent run must have amini mum of two returnpanels total ing at least60% of its length,extending in one direction.When using 120°connections, 12" must beadded to length of returnpanels as determined bymethods 1 and 2. Any rununder 100"W must have aminimum combined lengthof 72"W of return panels.Clear, Gray Tinted orFrosted Tempered SafetyGlass can be incorporatedeither by specifying a 69"Hglazed panel, or by specifyinga glazed tile kit. (Note:Cabling limited to data lines inthe top pathway anddata/power in base pathwayof 69"H glazed panels.)Door panel frame is offeredin 82"H x 42"W only (ADAaccessible). Door opening is36" wide. Both knob andADA lever-style handles areoffered. Door is standard asright-handed; can be fieldmodified to left-handed.TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 19

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFrames & ConnectorsBuilding horizontally with Terrace frames (continued)Intersecting connections“L” 90-Degree“X” 4-Way“C” 120° 3-Way“T” 3-Way“B” 120° 3-Way“L”, “T”, “X”, “B” and “C”connector kits are used whenconnecting frames atintersecting runs. “L”, “T”,and “X” add 3 1 ⁄2" to the totallength of the panel run foreach intersec tion, whetherlocated in the middle or at theend of the run.To convert the Panel Trimoption of an existing panelconfiguration, contactCustomer Support forspecification instructions —888-ALLSTEEL.Wall mount kits provide ameans to affix a panel run to aperma nent building wall. Kitadds 1 1 ⁄16" to length of panelrun.Top ViewFrameExtended straight connectorkit “S” can be used to keepcontinuous runs dimensionallyconsistent with opposing panelruns which incorporate “T” or“X” intersections. (Add 3 1 ⁄2"to the length of the run forevery extended straightconnector used.)Multiple-height connectionsalso utilize standard “L”,“T”, “X”, “B”, “C”, “S”and “E” connec tors, withcorresponding heightconnectors stacked accordingto the number of intersectingpanels from the bottom up.(See examples.)Example 1 56"HConnectorsrequired:1—13"H “S”1— 43"H “T”43"HFrame3 1 ⁄2"Frame S FrameExample 2 — For Flat Painted TrimConnectorsrequired:1— 13"H “E”1— 13"H “L”1— 13"H “T”1— 43"H “X”56"H69"H82"H43"HTerrace 3.4 — Working with FramesExample 2a — For Radius TrimConnectorsrequired:1— 13"H “H”1— 13"H “L”1— 13"H “T”1— 43"H “X”56"H69"HExample 3 — For Radius TrimConnectorsrequired:1— 13"H “B”1— 30"H “C”30"H43"HExample 4 — For Radius TrimConnectorsrequired:1— 13"H “H”1— 43"H “C”56"H82"H43"H43"HNOTE: Base connectors mustbe specified at base regardlessof full-height or segmentedconnection. Specify height thatcorresponds withsegment/frame height.Exception: when segmentingbase to 13" tiles, use 17" baseconnector.GSA Reference PageIn-line connectionsDirect connections betweenframes in a continuous run areaccomplished with providedhardware. There is noincremen tal increase indimension along the run.End trim kit “E” covers theexposed end of a frame, atthe end of a run or whenjoining flat top cap framesof differ ing height in certainconfigurations — flat paintedadds 3 ⁄16" to length of panelrun when used at the end ofa panel run — radius trimadds 5 ⁄8".High-low “H” covers theexposed end of a frame whenjoining radius top cap framesof differing height (seeillustration above, right).20 | Systems Supplement – 3/2013

Frames & ConnectorsSegmented Height ConnectionsTerrace 3.4 — Working with Off-module ConnectorsGSA Reference PageTERRACESegmentedNon-SegmentedIn variable height“T” connections — as shownabove — you would use theconnectors as indicated.Off-module Connector GuidelinesOff-module connector kitsjoin panels off-module at 90° angles. The total 3 3 ⁄8" panelthickness must be positioned within the confines of theshaded areas, as depicted in the illustration.NOTE: As of 12/15/2004, off-module connector kits allowback-to -back applications. (Kits produced prior to12/15/2004 are not compatible.)Restrictions:1) Panels mounted with the off-module kit cannot bepositioned at the centerline of 24"W panels.2) Tiles and base pathway covers cannot be removed fromthe face of a panel to which an off-module connectedpanel is mounted.3) Concealed electrical receptacles will not be accessible fromthe side of the panel to which an off-module connectedpanel is mounted.4) Panels must be the same height.When segmenting variableheight connection like theexample above, you shoulduse (from top to base) theconnectors as indicated.A hi/low connector mustalways be used directly aboveadjacent panel when locatingsegments in a variable heightapplication as shown inexample above.5) Do not suspend more than one overhead storage unit perside from panels in a panel run which is mounted, at oneor both ends, with an off-module connector kit.6) Use Data Port (Model AEP) to route dataand electrical betweenprimary panel run and panel-mounted off-modular.Example above representsradius variable heightconnection for 69" to 43"with full-height configurationusing the connectors asindicated.Radius trim connectors maybe specified either full heightor segmented.For segmented radius “L”,“T” and “S” connectors,specify the following modelsfor example shown above (topto base).Painted and fabricconnectors may be specified insame connection to match thetile configuration.For full height, specifyfull-height base connector.TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 21

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFrames & ConnectorsStructural Panel Frames30"H Frame 43"H Frame 56"H FrameConnector Kits“L”“T”“X”“B”“C”“A”“S”90° Connector Kit3-way Connector Kit4-way Connector Kit2-Way 120° Connector Kit3-Way 120° Connector Kit135° Angle Connector KitExtended StraightConnector Kit“M” Off-module ConnectorKit“W” Wall Mount Kit“E” End Trim Kit“K” Connector Retrofit Kit“H” End High-low Trim Kit forRadius Trim69"H Frame 82"H Frame“L”(Angled)“L”(Square)Terrace 3.4 — Overview of Frames“T” “X” “B” “C” “A” “S”“M” “W” “E” “K” “H”GSA Reference PageTrim Profiles (Top Cap shown)Flat Painted Radius Painted Radius Veneer22 | Systems Supplement – 3/2013

Frames & ConnectorsStacking FramesTerrace 3.4 — Overview of FramesGSA Reference PageTERRACE13"HStacking26"HStackingSpecialty Panel FramesGlass Door Sliding DoorGlass Panel — Double-Pane24"WGlass Panel42"WDoor Panel30"WGlass Panel82"H36"WGlass PanelTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 23

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesTerrace tiles come in a variety ofstyles. Select the aesthetic* andfunctional combination thatmeets your specific requirements.Additional tiles available,but not shown below, includeSteel, Steel Mesh, Monolithic,Monolithic Port, Veneer, andCustom.Flat painted,radius painted orradius veneer trim69"H frame shown.Frame designprovides a 3 ⁄4"revealat the bottom edgeof the beltline tilelocation to allowcables to enter orexit the panel andout onto theworksurface.Fabric tackable acoustical and superacoustical tiles are available inhundred of fabrics and colors.Landscape surface tiles allow you to choosefrom a range of innovative materials including:tech metals, translucent, and patternedtranslucent.Pass-thru trim kits facilitate themovement of documents andinformation betweenworkstations and departments.Glass tile “kits” provide access to naturallight, and connect office workers visually.Available in double-pane.Marker board tiles are excel lent forconference areas and offices whereinformal meetings are heldfrequently.Data/electrical port tiles permitreceptacles to be readily available atworksurface or standing height.Veneer tiles are available in Cleargrain,Natural 1, and Natural sets to providethe warmth of wood.Terrace 3.4 — Working with TilesGSA Reference PageHinges36"W / 42"W / 48"W / 60"W24"W / 30"WHinged tiles require 2 or 3hinges near the top edge,depending on tile width.Field-installed, steel tilehinges are required on bothsides of panel frame when anelectrical receptacle isconcealed behind the tiles.Model number and quantityrequired are determined bypanel width.Hinge kits can be installed ontackable acoustical, veneerand steel tiles. Hinged tiles canbe placed at any tile locationon the frame.*Aesthetics of opposing tile surface and/or frame interior should be considered when selecting perforated or light colored sheermaterials.24 | Systems Supplement – 3/2013

TilesTerrace 3.4 — Working with TilesSegment “kit” — Horizontalframe members can befield-installed to allow use ofmultiple 13" high tiles in lieuof 26" high and 39" high tiles.Segment Kits also providesupport for additionalelectrical components at 13"Hincrements.Top ClipBottom ClipTiles come equipped withfactory-installed hardenedsteel attachment clips.13"H port tilesmust be used atany tile location wherereceptacles or data ports areexposed.13"H tiles can beused on structuralframes and stacking frames asnoted to create a segmentedlook. Segment kit is requiredwhere dashed line is shown.26"H tiles can beused on structuralframes andstacking frames asnoted to create a segmentedlook. Segment kit is requiredwhere dashed line is shown.39"H tiles canonly be used on orabove the beltlineon 69"H and82"H structuralframes and stacking framesas noted.Monolithic tiles are sized tocompensate for the wider 3 ⁄4"reveal at beltline. These tilesmust span the beltline to befunctional.Specifying TilesCAD software is available toprovide assistance in drawingand specifying. As you designstation by station, tiles areautomatically placed tocorrect “z” height, the tileinventory is automaticallytallied, and finish options foreach model are easilyspecified.GSA Reference PagePackaging Tiles will bemulti-packed to reducepackaging materials and toprovide better structuralsupport during shipping. Itemsrequiring individual shippingshould be tagged on the orderwith different descriptivelocations to simplify thestaging process.Tool TilesTerrace Tool Tiles areavailable. They are to beused in conjunction withExtensions Work Tools —a complete offering oforganization and papermanagement accessories.See pages 328-331.TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 25

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesTile Position Options ChartBase FramesStackingFramesTerrace 3.4 — Working with TilesNominal (See chart below) Tackable Single-PaneFrame Tile Tile Tackable Super Specialty Glazed Double-PaneHeight Position Height Acoustical Acoustical 1 Tiles 2 Kit ! Glazed Tile Pass-ThruALL A 13" • • • • • •30" thru B 13" • • • • 5 • •82" AB 26" • • • • 5 • •43" C 13" • • • No • •56" C 13" • • • No • •D 13" • • • • • •CD 26" • No • No No No69" C 13" • • • No • •D 13" • • • • • •E 13" • • • • • •DE 26" • • • • • •CD 26" • No • No No NoCDE 39" • 3 No No No No No82" C 13" • • • No • •D 13" • • • • • •E 13" • • • • • •F 13" • • • • • •EF 26" • • • • • •DE 26" • • • No • •DEF 39" • • No No No NoCD 26" • No • No No NoCDE 39" • No No No No No13" G 13" • • • • 4 • •26" G 13" • • • • 4 • •H 13" • • • • • •GH 26" • • • • 4 • •1Tackable super acoustical tiles cannot be used at tile areas wherein electrical components are installed. Due to thickness of fiberglass on the back oftiles, tackable super acoustical tiles cannot transverse across horizontal frame members, including segment kit members and Reach units.2Includes data/electrical port tiles, hard surface, veneer, marker board, steel, steel mesh and tool tile.339"H x 60"W tiles are not offered.4Stacking frames require stacking glazed kits shown on page 63.5Requires additional bracket kit shown on page 63.Tile heights and locationsLetters on tiles representposition of tiles on framesreferenced in chart above.NOTE: No glass,pass-thru or superacoustical tiles canbe mounted onwall tracking.GSA Reference Page! De-emphasized 6/1/200826 | Systems Supplement – 3/2013

TilesMonolithic Tile Position Options ChartMonolithic TilesNominal (See chart below)Frame Tile Tile SegmentHeight Position Height Kits30" AB 26" 043"* ABC 43" 056" ABC 43" 0Tile Heights and LocationsBCD 43" 1ABCD 56" 069" ABC 43" 0BCD 43" 2ABCD 56" 1BCDE 56" 1ABCDE 69" 082" ABC 43" 0BCD 43" 2ABCD 56" 1BCDE 56" 2ABCDE 69" 1BCDEF 69" 2*43"H frames do not accept 39"H tiles.Letters on tiles representposition of tiles on framesreferenced in chart above.Monolithic tiles cannot beapplied in any applicationother than those shown at theright.AB30"HTerrace 3.4 — Working with TilesGSA Reference PageTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 27

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesNatural Veneer Tile Set Position Options ChartNatural Veneer Tile SetsTerrace 3.4 Natural Veneer Tile SetsLetters on tiles representheight of individual tiles,see codes above.Ordering code is listedabove each tile set, andtotal height of set islisted below.Sets with base covergraphic must be base tilesets.Terrace 3.4 — Working with Natural Veneer TilesNominal Frrame Tile Position Natural Veneer Tile Set Segment Kits Tiles IncludedHeight (refer to page 26) Tile Set Code Height Required*** (bottom to top)30" AB 2P 26"H 1 PP43" AB 2P 26"H 1 PPBC 2P 26"H 0 PPABC 3P 39"H 1 PPPABC QP 39"H 0 QP56" AB 2P 26"H 1 PPCD 2P 26"H 0 PPABC 3P 39"H 1 PPPABC QP 52"H 0 QPABCD 4P 52"H 1 PPPPABCD Q2P 52"H 0 QPPABCD QQ 52"H 0 QQ69" AB 2P 26"H 1 PPDE 2P 26"H 1 PPABC 3P 39"H 1 PPPABC QP 39"H 0 QPCDE 3P 39"H 1 PPPCDE QP 39"H 1 QPCDE PQ 39"H 1 PQABCDE 5P 65"H 0 PPPPPABCDE Q3P 65"H 2 QPPPABCDE QPQ 65"H 1 QPQABCDE TQ 65"H 0 TQ82" AB 2P 26"H 0 PPCD 2P 26"H 1 PPABC 3P 39"H 1 PPPABC QP 39"H 1 QPCDEF 4P 52"H 0 PPPPCDEF 2Q 52"H 2 QQABCDEF 6P 78"H 1 PPPPPPABCDEF Q4P 78"H 3 QPPPPABCDEF QPQP 78"H 2 QPQPABCDEF 3Q 78"H 1 QQQ95" AB 2P 26"H 1 PPCD 2P 26"H Varies** PPABC 3P 39"H Varies** PPPABC QP 39"H Varies** QPABCD QQ 52"H Varies** QQCDEFG 5P 65"H Varies** PPPPPCDEFG Q3P 65"H Varies** QPPPABCDEFG 7P 91"H Varies** PPPPPPPABCDEFG Q5P 91"H Varies** QPPPPPABCDEFG QP2Q 91"H Varies** QPQQABCDEFG T2Q 91"H Varies** TQQ2PPP26"H6PPPPPPP78"H3PPPP39"HQ4PPPPPQ78"HQPPQ39"HQPQPPQPQ78"HPQQP39"H3QQQQ78"H4PPPPP52"H7PPPPPPPP91"H*Q2PPPQ52"HQ5PPPPPPQ91"H*GSA Reference PageTile Height Codes Used ForNatural Veneer Sets Below:28 | Systems Supplement – 3/20132QQQ52"HQP2QQQPQ91"H*5PPPPPP65"HT2QQQT91"H*Q3PPPPQ65"HQPQQPQ65"HTQQT65"H*Requires stacking frame.P13"HTileQ26"HTileT43"HBase Tile• More combinations arepossible than those shown.• Refer to page 78 for special tileset specification and orderingdetails.**95"H frames are created bycombining base frame andstack-on frame(s), segmentkit(s) required variesdepending on which baseframe and stack-on frame(s)are used.***Segment kits required are forthe initial side, if mirroringtile configuration on oppositeside of frame no additionalsegment kits are required.

TilesFABRIC LANDSCAPE WOODTerrace 3.4 — Overview of TilesGSA Reference PageTERRACETackable AcousticalandTackable Super AcousticalExtensionsTool TilePass ThruDoublePane GlassNatural VeneerData/ElectricalPortSteel MeshSteelMarker BoardHard Surface and other LandscapeSurfaces (see specific pages)Tackable Acoustical Tiles or Tackable Super Acoustical TilesData/Electrical PortTackable Acoustical or Veneer onlyMonolithic TilesTackable Acoustical, Port, and Veneer (Veneer 43"H only)TilesCleargrain VeneerSteel, Steel Mesh, Veneer, Marker Board*, Glass Tile Kits*, Pass-thru Trim Kits*, Hard Surface, and other Landscape SurfacesTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING*Not available in 20"W tiles.Systems Supplement – 3/2013 allsteeloffice.com | 29

Frames• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.Terrace 3.4 — 69"H and 82"H Base Panel FramesPanel Frames• Includes frame, top cap, base pathway coversand attaching hardware.Door Panel Frame• Includes frame, 36"W door, hinges,and attaching hardware.• Matching veneer door includedwith veneer trim option.GSA SIN 711-1For specification details refer toWorking with Frames, pages 18-213 Top Cap OptionsT Flat Painted R Radius Painted V Radius VeneerTERRACE35 3 ⁄4"77 5 ⁄8"How to specify —Select theTerrace 3.4Model Numberfrom above.T Flat PaintedR Radius PaintedV Radius VeneerList Price List Price List Price Select Select SelectShip Flat Radius Radius Flat Radius RadiusDescription Model Weight Cubes Painted Painted Veneer Painted Painted Veneer69"H Base Panel Frames24"W T 06924 27 5.0 $ 589 $ 639 $ 760 $ 636 $ 686 $ 80730"W T 06930 30 6.1 $ 634 $ 684 $ 805 $ 681 $ 731 $ 85236"W T 06936 33 7.3 $ 654 $ 704 $ 823 $ 701 $ 751 $ 87042"W T 06942 37 8.4 $ 685 $ 735 $ 855 $ 732 $ 782 $ 90248"W T 06948 41 9.5 $ 738 $ 789 $ 909 $ 785 $ 836 $ 95660"W T 06960 49 11.7 $ 753 $ 805 $ 925 $ 800 $ 852 $ 97282"H Base Panel Frames24"W T 08224 30 5.9 $ 633 $ 680 $ 800 $ 680 $ 727 $ 84730"W T 08230 34 7.3 $ 702 $ 750 $ 869 $ 749 $ 797 $ 91636"W T 08236 38 8.6 $ 739 $ 786 $ 907 $ 786 $ 833 $ 95442"W T 08242 43 9.9 $ 755 $ 804 $ 924 $ 802 $ 851 $ 97148"W T 08248 48 11.2 $ 806 $ 853 $ 973 $ 853 $ 900 $1020Flat PaintedRadius PaintedShip Core Paint Select Core Paint SelectDescription Model Weight Cubes List Price List Price List Price List PriceDoor Panel — Laminate82"H x 42"W T 18242D 158 8.4 $3358 $3405 $3404 $3451NOTE: Will accommodate any standard locksetwith push style barrel for 2 3 ⁄4" setback.V1V3Core Paint Select Core Paint SelectList Price List Price List Price List PriceDoor Panel — Veneer82"H x 42"W TV18242D 158 8.4 $5052 $5099 $5397 $5444NOTE: Will accommodate any standard lockset with push style barrel for 2 3 ⁄4" setback.Lockset (Door Knob)polished brass,keyed on one side 899900 2 1.0 $ 96Door Leverbrushed aluminum,keyed on one side 899910 2 1.0 $ 2721st Option:Paint:See inside frontcover for finishes.. P .Examples: TT08224.P022nd Option:Veneer Trim Typeand Finish(if applicable):See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1TV08224.P27.NE800Systems Supplement – 3/2013 allsteeloffice.com | 31.3rd Option:Door Laminate(if applicable):See inside frontcover for finishes.SShippable by small-package carrier.TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FramesTerrace 3.4 — Working with Sliding DoorsFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACESliding Doors for Terrace ® are a great addition to any new or existing installations. The Sliding Door can be specified for bothTerrace 3.4 and 2.6 with specific Mounting Kits for each door ordered. With a Frosted Translucent insert and your choice of Core orSelect paint, the Sliding Door will create a unique look for any office environment.The Sliding Doors are available in 69" and 82"H models and can mount to 30", 36", 42", and 48"W panels. They accommodate a36"W opening and are 42"W, nominally. The doors ship from the factory non-handed and become handed when field installed to fitthe scope of the project. The handle pulls located on each side of the door are color matched to the trim to create a uniform style.And with the threshold free design, the Sliding Door offers better aesthetics and safety by eliminating the potential for tripping.General Guidelines for Use of Sliding Door• The system requires the ordering of both a Door and aMounting Bracket Kit.• The Terrace Door works with Terrace 3.4 and 2.6.• All doors are 42" wide to accommodate a 36"W opening andare non-handed .• A Mounting Bracket Kit must be ordered for each doorcorresponding to the mounting panels width (30", 36", 42"or 48"W).• Mounting Bracket Kits for Terrace must be ordered per paneltype and trim option. Kits are available for Terrace 2.6,Terrace 3.4 Flat Trim and Terrace 3.4 Radius Trim.General Guidelines for Layout Planning of Sliding Door• Stability guidelines must be followed when specifying aSliding Door. (Refer to page 19 (Terrace 3.4) and page 86(Terrace 2.6). The sliding door system was designed to closean opening in a run of parallel panels. Doors mounted to longruns of panels without floor support, ties to worksurfaces orreturn panels may seem less stable.• If the door is used to close an opening (A) where the panelopposite the door is at 90°, there will be a gap equal to thepanel thickness between the door and the panel end whenclosed.• When planning the layout, care must be taken if the planincludes a door mounted on a panel that is less than 42"W.If the panel is at a corner (B), the door will protrude into theaisle or next workstation when in the open position.• If back-to-back doors are mounted on panels (C) that are lessthan 42"W they will interfere with each if both are open atthe same time.• The door is attached at the base of the panel at any endposition with a wrap around bracket. Bracket kits are orderedin conjunction with appropriate end trim profiles. The slots atthe base of the panel must be clear (D) and cannot be utilizedby worksurface supports or panel hung components.• If the door is mounted to a panel run this is positionedadjacent to a wall (E) or an inside 90° angle and there is not a42" clearance between the track and the wall/inside 90° theassembly of the first stop will be difficult and plans will needto be modified for the assembly.• If a door is closing an opening of a workstation that includesa TEE connector in the opposite wall, an Extended Straightconnector may need to be used to maintain the 36" requiredopening.69L69/36T69/36T69E3669E69/42D69/36T69/36TBC69/4269E69/36T69/36T69L69ENC69/36 69T NC69/3669/4269T69/4269ENC69/3669LNC69/3669E69ENC69/36 NC69/3669E36363669/36T69/36TNC69/36NC69/36NC69/36NC69/3669L69/36T69/36T69/36T69LNC69/36NC69/36NC69/36NC69/3669/4269E36NC69/36NC69/36NC69/3669L69/36T69/36T69E69/42 36A69/36TE69E3669ENC69/36NC69/36NC69/36NC69/3669TNC69/36NC69/36NC69/3669TNC69/3669E69/4269L69/36TB69/36T69L69/36T69/36T69/36T69E32 | Systems Supplement – 3/2013

FramesSliding DoorSliding Door• One specific door model for both Terrace 3.4and 2.6. Terrace 2.6 trim on page 101.• Sliding doors available in 69"H and 82"Hand can mount to 30", 36", 42", and 48"Wpanels of same height.• Doors are 42"W to accommodate a 36"Wopening.• Order system specific Mounting Kit for eachdoor ordered.• Threshold free design for best aesthetics andsafety-eliminates potential for tripping.• Sliding door ships non-handed. Handles arefield installed to L or R hand.• Handle pulls on each side of door are colormatched to trim.• Available in Core and Select paint.• Doors are available in Frosted Translucentinsert material only.GSA SIN 711-1For specification details refer to:Working with Sliding Door Panels, page 32Mounting Kits• Mounting kits are specific to each system.• Terrace bracket kits are trim specific.• Order to match the width of the panel the kitis hanging off of.• Available in Core and Select paint.TERRACESliding DoorBracket KitHow to specify —Select theTerraceModel Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List PriceTerrace Sliding Door for 36"W opening69"H x 42"W TT16942SD 38 7.7 $2858 $291482"H x 42"W TT18242SD 46 9.3 $3480 $3536Terrace Mounting Bracket Kit — for 3.4 Flat Trim30"W TTDMK30 4 S 0.4 $ 376 $ 39036"W TTDMK36 5 S 0.5 $ 376 $ 39042"W TTDMK42 6 S 0.5 $ 376 $ 39048"W TTDMK48 7 S 0.6 $ 376 $ 390Terrace Mounting Bracket Kit — for 3.4 Radius Trim30"W TRDMK30 4 S 0.4 $ 376 $ 39036"W TRDMK36 5 S 0.5 $ 376 $ 39042"W TRDMK42 6 S 0.5 $ 376 $ 39048"W TRDMK48 7 S 0.6 $ 376 $ 390.1st Option:Paint:See inside frontcover for finishes.P .2nd Option:Insert(Door only):FTFTFrostedTranslucentExamples: TT16942SD.PR3.FT TTDMK30.PR3 S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 33TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFramesStacking Frames• Includes attaching hardware.• Black only.• Uses top cap from base panel.'Segment Kits• Formed steel cross members.• One kit does both sides of frame.• Includes attaching hardware.• Black only.How to specify —Select theTerrace 3.4Model Numberfrom above.TT13" H Stacking FramesTerrace 3.4 — 13"H and 26"H Stacking Frames/Segment KitsShipListDescription Model Weight Cubes Price20"W TT01320 7 S 0.9 $ 38124"W TT01324 14 S 1.1 $ 38130"W TT01330 17 S 1.3 $ 40336"W TT01336 19 S 1.6 $ 42042"W TT01342 22 S 1.8 $ 43348"W TT01348 25 S 2.1 $ 44760"W TT01360 31 S 2.5 $ 46426"H Stacking Frames24"W TT02624 D17 S 2.030"W TT02630 D20 S 2.436"W TT02636 D22 S 2.942"W TT02642 D25 S 3.348"W TT02648 D28 S 3.860"W TT02660 D34 S 4.7Segment Kits20"W TT220S 4 S 0.4 $ 5324"W TT224S 4 S 0.4 $ 5330"W TT230S 4 S 0.4 $ 5736"W TT236S 5 S 0.5 $ 6342"W TT242S 5 S 0.5 $ 8048"W TT248S 6 S 0.6 $ 8860"W TT260S 7 S 0.8 $ 96Example: TT01324NOTE: 20"W stacking frames and segment kitsfor Reach are also on page 278.For specification details refer toWorking with Frames, pages 18-21Overview of Frames, pages 22-23D Discontinued 8/29/201034 | Systems Supplement – 3/2013SGSA SIN 711-1DDDDDDShippable by small-package carrier.

FramesGlass Panel Frames• Veneer Radius Top Caps available inCleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Includes panel frame, top cap, base pathwaycovers and tempered safety glass withmounting hardware.• Black frame.• Comes fully assembled.Terrace 3.4 — Glass Panel FramesFor specification details refer toWorking with Frames, pages 18-21Overview of Frames, pages 22-233 Top Cap OptionsGSA SIN 711-1T Flat Painted R Radius Painted V Radius VeneerTERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.T Flat PaintedR Radius PaintedV Radius VeneerList Price List Price List Price Select Select SelectShip Flat Radius Radius Flat Radius RadiusDescription Model Weight Cubes Painted Painted Veneer Painted Painted VeneerGlazed Panels-Double-Pane (Black frame only) — Clear69"H x 24"W T 16924GP D 90 5.069"H x 30"W T 16930GP D 112 6.169"H x 36"W T 16936GP D 135 7.3Glazed Panels-Double-Pane (Black frame only) — Frosted69"H x 24"W T 16924GP D 90 5.069"H x 30"W T 16930GP D 112 6.169"H x 36"W T 16936GP D 135 7.31st Option:Paint:See inside frontcover for finishes.T 1 6 9 G P . P .Examples: TT16924GP.P02.T2nd Option:Veneer Trim Typeand Finish(if applicable):See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1TV16924GP.P27.NE800.FSystems Supplement – 3/2013 allsteeloffice.com | 35DDDDDD.DDDDDD3rd Option:Glass:C ClearF FrostedDDDDDDDDDDDDDDDDDDD Discontinued 8/29/2010DDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Flat — Painted Top Cap / Painted TrimGSA SIN 711-1“L” and “T” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.How to specify —Select theTerrace 3.4Model Numberfrom above.TT3 . PShipSelectDescription Model Weight Cubes List Price List Price“L” 90° (Angled Trim) Connector Kits — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313L 2 S 0.2 $ 90 $ 11226"H stacking/segmented TT326L 3 S 0.4 $ 124 $ 14639"H stacking/segmenting TT339L 4 S 0.5 $ 150 $ 17230"H base panel TT330L 3 S 0.4 $ 137 $ 15943"H base panel TT343L 4 S 0.5 $ 157 $ 17956"H base panel TT356L 5 S 0.6 $ 166 $ 18869"H base panel TT369L 6 S 0.8 $ 190 $ 21282"H base panel TT382L 7 S 0.9 $ 226 $ 249“L” 90° (Square Trim) Connector Kits — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313LS 2 S 0.2 $ 154 $ 17626"H stacking/segmented TT326LS 3 S 0.4 $ 198 $ 22039"H stacking/segmenting TT339LS 4 S 0.5 $ 242 $ 26430"H base panel TT330LS 4 S 0.5 $ 217 $ 23943"H base panel TT343LS 4 S 0.5 $ 249 $ 27156"H base panel TT356LS 5 S 0.6 $ 303 $ 32569"H base panel TT369LS 6 S 0.8 $ 322 $ 34482"H base panel TT382LS 7 S 0.9 $ 400 $ 423“T” 3-way Connector Kits — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313T 2 S 0.2 $ 90 $ 11226"H stacking/segmented TT326T 3 S 0.4 $ 124 $ 14639"H stacking/segmented TT339T 4 S 0.5 $ 150 $ 17230"H base panel TT330T 3 S 0.4 $ 137 $ 15943"H base panel TT343T 4 S 0.5 $ 157 $ 17956"H base panel TT356T 5 S 0.6 $ 166 $ 18869"H base panel TT369T 6 S 0.8 $ 190 $ 21282"H base panel TT382T 7 S 0.9 $ 226 $ 2491st Option:Paint:See inside frontcover for finishes.Example: TT313L.P02Shippable by small-package carrier.36 | Systems Supplement – 3/2013S

Connectors Terrace 3.4 — Connector Kits 3.4 to 3.4Flat — Painted Top Cap / Painted TrimGSA SIN 711-1“X” Connector Kits• Includes top cap and connectors.• Connector adds 3 1 ⁄2" to run.“A” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.TERRACE“S” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.How to specify —Select theTerrace 3.4Model Numberfrom above.TT3 . PShipSelectDescription Model Weight Cubes List Price List Price“X” 4-way Connector Kits — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313X 2 S 0.2 $ 90 $ 10226"H stacking/segmented TT326X 2 S 0.2 $ 124 $ 13630"H base panel TT330X 2 S 0.2 $ 137 $ 14943"H base panel TT343X 2 S 0.2 $ 157 $ 16956"H base panel TT356X 3 S 0.2 $ 166 $ 17869"H base panel TT369X 3 S 0.2 $ 190 $ 20282"H base panel TT382X 3 S 0.2 $ 226 $ 238“S” Extended Straight Connector Kits — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313S 3 S 0.2 $ 104 $ 12626"H stacking/segmented TT326S 4 S 0.4 $ 137 $ 15939"H stacking/segmented TT339S 5 S 0.5 $ 163 $ 18530"H base panel TT330S 4 S 0.4 $ 154 $ 17643"H base panel TT343S 5 S 0.5 $ 179 $ 20156"H base panel TT356S 6 S 0.6 $ 188 $ 21069"H base panel TT369S 8 S 0.8 $ 203 $ 22582"H base panel TT382S 9 S 0.9 $ 243 $ 266“A” 135° Angle Connector Kits — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313A 2 S 0.2 $ 90 $ 11226"H stacking/segmented TT326A 3 S 0.4 $ 124 $ 14643"H base panel TT343A 4 S 0.5 $ 157 $ 17956"H base panel TT356A 5 S 0.6 $ 166 $ 18869"H base panel TT369A 6 S 0.8 $ 190 $ 21282"H base panel TT382A 7 S 0.9 $ 226 $ 2491st Option:Paint:See inside frontcover for finishes.Example: TT313S.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 37STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Flat — Painted Top Cap / Painted TrimGSA SIN 711-12-Way 120° Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.How to specify —Select theTerrace 3.4Model Numberfrom above.TT3 . PShipSelectDescription Model Weight Cubes List Price List Price2-Way 120° Connector — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313B 2 S 0.2 $ 90 $ 11226"H stacking/segmented TT326B 3 S 0.4 $ 124 $ 14639"H stacking/segmented TT339B 4 S 0.5 $ 150 $ 17230"H base panel TT330B 3 S 0.4 $ 137 $ 15943"H base panel TT343B 4 S 0.5 $ 157 $ 17956"H base panel TT356B 5 S 0.6 $ 166 $ 18869"H base panel TT369B 6 S 0.8 $ 190 $ 21282"H base panel TT382B 7 S 0.9 $ 226 $ 2493-Way 120° Connector — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313C 2 S 0.2 $ 90 $ 10226"H stacking/segmented TT326C 2 S 0.2 $ 124 $ 13639"H stacking/segmented TT339C 2 S 0.2 $ 150 $ 16230"H base panel TT330C 2 S 0.2 $ 137 $ 14943"H base panel TT343C 2 S 0.2 $ 157 $ 16956"H base panel TT356C 3 S 0.2 $ 166 $ 17869"H base panel TT369C 3 S 0.2 $ 190 $ 20282"H base panel TT382C 3 S 0.2 $ 226 $ 2381st Option:Paint:See inside frontcover for finishes.Example: TT313B.P023-Way 120° Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.Shippable by small-package carrier.38 | Systems Supplement – 3/2013S

Connectors Terrace 3.4 — Connector Kits 3.4 to 3.4Flat — Painted Top Cap / Painted TrimGSA SIN 711-1“E” End Trim Kits• End vertical trim cover (includes top captrim — adds 3 ⁄16" to run).TERRACE“W” Wall Mount Kits• Top cap. (Color must be specified.)• Connector (black only — adds 1 1 ⁄16" to run).How to specify —Select theTerrace 3.4Model Numberfrom above.TT3 . PShipSelectDescription Model Weight Cubes List Price List Price“E” End Trim Kits — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313E 2 S 0.2 $ 68 $ 9026"H stacking/segmented TT326E 2 S 0.4 $ 74 $ 9639"H stacking/segmented TT339E 3 S 0.5 $ 80 $ 10230"H base panel TT330E 2 S 0.4 $ 75 $ 9743"H base panel TT343E 3 S 0.5 $ 82 $ 10456"H base panel TT356E 3 S 0.6 $ 96 $ 11869"H base panel TT369E 4 S 0.8 $ 123 $ 14582"H base panel TT382E 5 S 0.9 $ 136 $ 159“W” Wall Mount Kits — Flat Painted Top Cap and Painted Trim13"H stacking/segmented TT313W 2 S 0.2 $ 90 $ 11226"H stacking/segmented TT326W 2 S 0.4 $ 124 $ 14630"H base panel TT330W 2 S 0.4 $ 150 $ 17243"H base panel TT343W 3 S 0.5 $ 157 $ 17956"H base panel TT356W 3 S 0.6 $ 166 $ 18869"H base panel TT369W 4 S 0.8 $ 190 $ 21282"H base panel TT382W 5 S 0.9 $ 226 $ 2491st Option:Paint:See inside frontcover for finishes.Example: TT313E.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 39STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Painted Top Cap / Painted TrimGSA SIN 711-1“L” and “T” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.“X” Connector Kits• Includes top cap and connectors.• Connector adds 3 1 ⁄2" to run.How to specify —Select theTerrace 3.4Model Numberfrom above.TR3 P . PShipSelectDescription Model Weight Cubes List Price List Price“L” 90° Connector Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TR313LP 2 S 0.2 $ 148 $ 17126"H stacking/segmented TR326LP 3 S 0.4 $ 189 $ 21239"H stacking/segmented TR339LP 4 S 0.5 $ 227 $ 25017"H base panel TR317LP 3 S 0.4 $ 189 $ 21230"H base panel TR330LP 4 S 0.5 $ 206 $ 22943"H base panel TR343LP 4 S 0.5 $ 237 $ 26056"H base panel TR356LP 5 S 0.6 $ 284 $ 30769"H base panel TR369LP 6 S 0.8 $ 306 $ 32982"H base panel TR382LP 7 S 0.9 $ 377 $ 400“T” 3-way Connector Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TR313TP 2 S 0.2 $ 148 $ 17126"H stacking/segmented TR326TP 3 S 0.4 $ 189 $ 21239"H stacking/segmented TR339TP 4 S 0.5 $ 227 $ 25017"H base panel TR317TP 3 S 0.4 $ 189 $ 21230"H base panel TR330TP 4 S 0.5 $ 206 $ 22943"H base panel TR343TP 4 S 0.5 $ 237 $ 26056"H base panel TR356TP 5 S 0.6 $ 284 $ 30769"H base panel TR369TP 6 S 0.8 $ 306 $ 32982"H base panel TR382TP 7 S 0.9 $ 377 $ 400“X” 4-way Connector Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TR313XP 2 S 0.2 $ 103 $ 11526"H stacking/segmented TR326XP 2 S 0.2 $ 135 $ 14730"H base panel TR330XP 2 S 0.2 $ 150 $ 16243"H base panel TR343XP 2 S 0.2 $ 167 $ 17956"H base panel TR356XP 3 S 0.2 $ 198 $ 21069"H base panel TR369XP 3 S 0.2 $ 214 $ 22682"H base panel TR382XP 3 S 0.2 $ 267 $ 2791st Option:Paint:See inside frontcover for finishes.Example: TR313LP.P02Shippable by small-package carrier.40 | Systems Supplement – 3/2013S

Connectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Painted Top Cap / Painted TrimGSA SIN 711-1High-low End Trim Kits• End vertical cover (includes top cap).• Trim adds 5 ⁄8" to run.TERRACE“S” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.How to specify —Select theTerrace 3.4Model Numberfrom above.TR3 P . PShipSelectDescription Model Weight Cubes List Price List PriceHigh-Low End Trim Kits — Radius Painted Top Cap and Painted Trim (for all high-low applications)13"H TR313HP 2 S 0.2 $ 101 $ 11326"H TR326HP 2 S 0.4 $ 123 $ 13539"H TR339HP 3 S 0.5 $ 145 $ 157“S” Extended Straight Connector Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TR313SP 3 S 0.2 $ 184 $ 20726"H stacking/segmented TR326SP 4 S 0.4 $ 223 $ 24639"H stacking/segmented TR339SP 5 S 0.5 $ 261 $ 28417"H base panel TR317SP 4 S 0.4 $ 243 $ 26630"H base panel TR330SP 5 S 0.5 $ 258 $ 28143"H base panel TR343SP 5 S 0.5 $ 297 $ 32056"H base panel TR356SP 6 S 0.6 $ 343 $ 36669"H base panel TR369SP 8 S 0.8 $ 357 $ 38082"H base panel TR382SP 9 S 0.9 $ 463 $ 4861st Option:Paint:See inside frontcover for finishes.Example: TR313SP.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 41STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Painted Top Cap / Painted TrimGSA SIN 711-12-Way 120° Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.How to specify —Select theTerrace 3.4Model Numberfrom above.TR3 P . PShipSelectDescription Model Weight Cubes List Price List Price2-Way 120° Connector — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TR313BP D D2 S 0.226"H stacking/segmented TR326BP D D3 S 0.439"H stacking/segmented TR339BP D D4 S 0.530"H base panel TR330BP D D3 S 0.443"H base panel TR343BP D D4 S 0.556"H base panel TR356BP D D5 S 0.669"H base panel TR369BP D D6 S 0.882"H base panel TR382BP D D7 S 0.93-Way 120° Connector — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TR313CP D D2 S 0.226"H stacking/segmented TR326CP D D2 S 0.239"H stacking/segmented TR339CP D D2 S 0.230"H base panel TR330CP D D2 S 0.243"H base panel TR343CP D D2 S 0.256"H base panel TR356CP D D3 S 0.269"H base panel TR369CP D D3 S 0.282"H base panel TR382CP D D3 S 0.21st Option:Paint:See inside frontcover for finishes.Example: TR313BP.P023-Way 120° Connector Kits• Top cap. (Color must be specified.)D D Discontinued 2/12/2012S Shippable by small-package carrier.42 | Systems Supplement – 3/2013D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D

Connectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Painted Top Cap / Painted TrimGSA SIN 711-1“E” End Trim Kits• End vertical cover (includes top cap trim —adds 5 ⁄8" to run).• Not for high-low applications. See page 41.TERRACE“W” Wall Mount Kits• Top cap. (Color must be specified.)• Connector (black only — adds 1 1 ⁄16" to run).How to specify —Select theTerrace 3.4Model Numberfrom above.TR3 P . PShipSelectDescription Model Weight Cubes List Price List Price“E” End Trim Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TR313EP 2 S 0.2 $ 101 $ 12426"H stacking/segmented TR326EP 2 S 0.4 $ 123 $ 14639"H stacking/segmented TR339EP 3 S 0.5 $ 145 $ 16817"H base panel TR317EP 2 S 0.4 $ 124 $ 14730"H base panel TR330EP 3 S 0.5 $ 141 $ 16443"H base panel TR343EP 3 S 0.5 $ 150 $ 17356"H base panel TR356EP 3 S 0.6 $ 181 $ 20469"H base panel TR369EP 4 S 0.8 $ 198 $ 22182"H base panel TR382EP 5 S 0.9 $ 244 $ 267“W” Wall Mount Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TR313WP 2 S 0.2 $ 103 $ 12626"H stacking/segmented TR326WP 2 S 0.4 $ 135 $ 15830"H base panel TR330WP 2 S 0.4 $ 166 $ 18943"H base panel TR343WP 3 S 0.5 $ 167 $ 19056"H base panel TR356WP 3 S 0.6 $ 198 $ 22169"H base panel TR369WP 4 S 0.8 $ 214 $ 23782"H base panel TR382WP 5 S 0.9 $ 267 $ 2901st Option:Paint:See inside frontcover for finishes.Example: TR313EP.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 43STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Painted Top Cap / Fabric TrimGSA SIN 711-1“L” and “T” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.“X” Connector Kits• Includes top cap and connectors.• Connector adds 3 1 ⁄2" to run.How to specify —Select theTerrace 3.4Model Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List Price“L” 90° Connector Kits — Radius Painted Top Cap and Fabric Trim13"H stacking/segmented TR313LF D2 S 0.226"H stacking/segmented TR326LF D3 S 0.439"H stacking/segmented TR339LF D4 S 0.517"H base panel TR317LF D3 S 0.430"H base panel TR330LF D4 S 0.543"H base panel TR343LF D4 S 0.556"H base panel TR356LF D5 S 0.669"H base panel TR369LF D6 S 0.882"H base panel TR382LF D7 S 0.9“T” 3-way Connector Kits — Radius Painted Top Cap and Fabric Trim13"H stacking/segmented TR313TF D2 S 0.226"H stacking/segmented TR326TF D3 S 0.439"H stacking/segmented TR339TF D4 S 0.517"H base panel TR317TF D3 S 0.430"H base panel TR330TF D4 S 0.543"H base panel TR343TF D4 S 0.556"H base panel TR356TF D5 S 0.669"H base panel TR369TF D6 S 0.882"H base panel TR382TF D7 S 0.9“X” 4-way Connector Kits — Radius Painted Top Cap and Fabric Trim13"H stacking/segmented TR313XF D2 S 0.226"H stacking/segmented TR326XF D2 S 0.230"H base panel TR330XF D2 S 0.243"H base panel TR343XF D2 S 0.256"H base panel TR356XF D3 S 0.269"H base panel TR369XF D3 S 0.282"H base panel TR382XF D3 S 0.2High-Low End Trim Kits — Radius Painted Top Cap and Fabric Trim (for all high-low applications)13"H TR313HF D2 S 0.2D26"H TR326HF D2 S 0.4D39"H TR339HF D3 S 0.5D1st Option:Paint:See inside frontcover for finishes.TR3 F . P .Example: TR313LF.P06.CS918High-low End Trim Kits• End vertical cover (includes top cap).2nd Option:Fabric(Vertical Surface):See inside backcover for fabrics.Note: Fabric specificationnot required for “X” 4-wayconnectors.D Discontinued 8/29/2010S Shippable by small-package carrier.44 | Systems Supplement – 3/2013DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

Connectors“S” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.Terrace 3.4 — Connector KitsRadius — Painted Top Cap / Fabric Trim“E” End Trim KitsGSA SIN 711-1• End vertical cover (includes top cap trim —adds 5 ⁄8" to run).• Not for high-low applications.TERRACENOTE: For fabric trim use painted Wall MountKits on page 43.How to specify —Select theTerrace 3.4Model Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List Price“S” Extended Straight Connector Kits — Radius Painted Top Cap and Fabric Trim13"H stacking/segmented TR313SF D3 S 0.226"H stacking/segmented TR326SF D4 S 0.439"H stacking/segmented TR339SF D5 S 0.517"H base panel TR317SF D4 S 0.430"H base panel TR330SF D5 S 0.543"H base panel TR343SF D5 S 0.556"H base panel TR356SF D6 S 0.669"H base panel TR369SF D8 S 0.882"H base panel TR382SF D9 S 0.9“E” End Trim Kits — Radius Painted Top Cap and Fabric Trim13"H stacking/segmented TR313EF D2 S 0.226"H stacking/segmented TR326EF D2 S 0.439"H stacking/segmented TR339EF D3 S 0.517"H base panel TR317EF D2 S 0.430"H base panel TR330EF D3 S 0.543"H base panel TR343EF D3 S 0.556"H base panel TR356EF D3 S 0.669"H base panel TR369EF D4 S 0.882"H base panel TR382EF D5 S 0.91st Option:Paint:See inside frontcover for finishes.TR3 F . P .Example: TR313SF.P02.CS9182nd Option:Fabric(Vertical Surface):See inside backcover for fabrics.Note: Fabric specificationnot required for “X” 4-wayconnectors.D Discontinued 8/29/2010S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 45DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Veneer Top Cap / Painted TrimGSA SIN 711-1• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 3.4Model Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List Price“L” 90° Connector Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TV313LP 2 S 0.2 $ 243 $ 26626"H stacking/segmented TV326LP 3 S 0.4 $ 283 $ 30639"H stacking/segmented TV339LP 4 S 0.5 $ 323 $ 34617"H base segmented TV317LP 3 S 0.4 $ 283 $ 30630"H base panel TV330LP 4 S 0.5 $ 300 $ 32343"H base panel TV343LP 4 S 0.5 $ 333 $ 35656"H base panel TV356LP 5 S 0.6 $ 380 $ 40369"H base panel TV369LP 6 S 0.8 $ 401 $ 42482"H base panel TV382LP 7 S 0.9 $ 473 $ 496“T” 3-way Connector Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TV313TP 2 S 0.2 $ 243 $ 26626"H stacking/segmented TV326TP 3 S 0.4 $ 283 $ 30639"H stacking/segmented TV339TP 4 S 0.5 $ 323 $ 34617"H base segmented TV317TP 3 S 0.4 $ 283 $ 30630"H base panel TV330TP 4 S 0.5 $ 300 $ 32343"H base panel TV343TP 4 S 0.5 $ 333 $ 35656"H base panel TV356TP 5 S 0.6 $ 380 $ 40369"H base panel TV369TP 6 S 0.8 $ 401 $ 42482"H base panel TV382TP 7 S 0.9 $ 473 $ 496“X” 4-way Connector Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TV313XP 2 S 0.2 $ 198 $ 19826"H stacking/segmented TV326XP 2 S 0.2 $ 229 $ 22930"H base panel TV330XP 2 S 0.2 $ 245 $ 24543"H base panel TV343XP 2 S 0.2 $ 262 $ 26256"H base panel TV356XP 3 S 0.2 $ 294 $ 29469"H base panel TV369XP 3 S 0.2 $ 310 $ 31082"H base panel TV382XP 3 S 0.2 $ 360 $ 360High-Low End Trim Kits — Radius Veneer Top Cap and Painted Trim (for all high-low applications)13"H TV313HP 2 S 0.2 $ 195 $ 20726"H TV326HP 2 S 0.4 $ 218 $ 23039"H TV339HP 3 S 0.5 $ 239 $ 2511st Option:Paint:See inside frontcover for finishes.TV3 P . P .Example: TV313LP.P27.NE800“L” and “T” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.“X” Connector Kits• Includes top cap and connectors.• Connector adds 3 1 ⁄2" to run.2nd Option:VeneerTop Cap Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1High-low End Trim Kits• End vertical cover (includes top cap).Note: Paint specification notrequired for “X” 4-wayconnectors.Shippable by small-package carrier.46 | Systems Supplement – 3/2013S

Connectors• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 3.4Model Numberfrom above.Terrace 3.4 — Connector KitsRadius — Veneer Top Cap / Painted TrimGSA SIN 711-1ShipSelectDescription Model Weight Cubes List Price List Price“S” Extended Straight Connector Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TV313SP 3 S 0.2 $ 281 $ 30426"H stacking/segmented TV326SP 4 S 0.4 $ 317 $ 34039"H stacking/segmented TV339SP 5 S 0.5 $ 356 $ 37917"H base segmented TV317SP 4 S 0.4 $ 338 $ 36130"H base panel TV330SP 5 S 0.5 $ 354 $ 37743"H base panel TV343SP 5 S 0.5 $ 391 $ 41456"H base panel TV356SP 6 S 0.6 $ 440 $ 46369"H base panel TV369SP 8 S 0.8 $ 454 $ 47782"H base panel TV382SP 9 S 0.9 $ 559 $ 5822-Way 120° Connector — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TV313BP 3 S 0.2 $ 243 $ 26626"H stacking/segmented TV326BP 4 S 0.4 $ 283 $ 30639"H stacking/segmented TV339BP 5 S 0.5 $ 323 $ 34630"H base panel TV330BP 5 S 0.5 $ 300 $ 32343"H base panel TV343BP 5 S 0.5 $ 333 $ 35656"H base panel TV356BP 6 S 0.6 $ 380 $ 40369"H base panel TV369BP 8 S 0.8 $ 401 $ 42482"H base panel TV382BP 9 S 0.9 $ 473 $ 496“E” End Trim Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TV313EP 2 S 0.2 $ 195 $ 21826"H stacking/segmented TV326EP 2 S 0.4 $ 218 $ 24139"H stacking/segmented TV339EP 3 S 0.5 $ 239 $ 26217"H base segmented TV317EP 2 S 0.4 $ 220 $ 24330"H base panel TV330EP 3 S 0.5 $ 237 $ 26043"H base panel TV343EP 3 S 0.5 $ 245 $ 26856"H base panel TV356EP 3 S 0.6 $ 276 $ 29969"H base panel TV369EP 4 S 0.8 $ 294 $ 31782"H base panel TV382EP 5 S 0.9 $ 339 $ 362“W” Wall Mount Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TV313WP 2 0.2 $ 198 $ 22126"H stacking/segmented TV326WP 2 0.4 $ 229 $ 25230"H base panel TV330WP 2 0.4 $ 261 $ 28443"H base panel TV343WP 3 0.5 $ 262 $ 28556"H base panel TV356WP 3 0.6 $ 294 $ 31769"H base panel TV369WP 4 0.8 $ 310 $ 33382"H base panel TV382WP 5 0.9 $ 360 $ 3831st Option:Paint:See inside frontcover for finishes.TV3 P . P .Example: TV313SP.P27.NE800“S” Connector Kits• Includes top cap, connectors,vertical cover and attaching hardware.• Connector adds 3 1 ⁄2" to run.2-Way 120° Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.2nd Option:Veneer Top CapType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1“E” End Trim Kits• End vertical cover (includes top cap trim —adds 5 ⁄8" to run).• Not for high-low applications. See page 46.“W” Wall Mount Kits• Includes top cap (finish must be specified).• Connector adds 1 1 ⁄16" to run.Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 47STERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Veneer Top Cap / Fabric TrimGSA SIN 711-1• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 3.4Model Numberfrom above.TV3 . P .ShipDescription Model Weight Cubes List Price“L” 90° Connector Kits — Radius Veneer Top Cap and Fabric Trim13"H stacking/segmented TV313LF D2 S 0.226"H stacking/segmented TV326LF D3 S 0.439"H stacking/segmented TV339LF D4 S 0.517"H base panel TV317LF D3 S 0.430"H base panel TV330LF D4 S 0.543"H base panel TV343LF D4 S 0.556"H base panel TV356LF D5 S 0.669"H base panel TV369LF D6 S 0.882"H base panel TV382LF D7 S 0.9“T” 3-way Connector Kits — Radius Veneer Top Cap and Fabric Trim13"H stacking/segmented TV313TF D2 S 0.226"H stacking/segmented TV326TF D3 S 0.439"H stacking/segmented TV339TF D4 S 0.517"H base panel TV317TF D3 S 0.430"H base panel TV330TF D4 S 0.543"H base panel TV343TF D4 S 0.556"H base panel TV356TF D5 S 0.669"H base panel TV369TF D6 S 0.882"H base panel TV382TF D7 S 0.9“X” 4-way Connector Kits — Radius Veneer Top Cap13"H stacking/segmented TV313XP 2 S 0.2 $ 19826"H stacking/segmented TV326XP 2 S 0.2 $ 22930"H base panel TV330XP 2 S 0.2 $ 24543"H base panel TV343XP 2 S 0.2 $ 26256"H base panel TV356XP 3 S 0.2 $ 29469"H base panel TV369XP 3 S 0.2 $ 31082"H base panel TV382XP 3 S 0.2 $ 360High-Low End Trim Kits — Radius Veneer Top Cap and Fabric Trim (for all high-low applications)13"H TV313HF D2 S 0.226"H TV326HF D2 S 0.439"H TV339HF D3 S 0.51st Option:Paint(Base Cover):See inside frontcover for finishes.2nd Option:Fabric(Surface):See inside backcover for fabrics.Example: TV313XP.P27.SC777“L” and “T” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.“X” Connector Kits• Includes top cap and connectors.• Connector adds 3 1 ⁄2" to run..3rd Option:VeneerTop Cap Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1High-low End Trim Kits• End vertical cover (includes top cap).Note: Fabricspecificationnot required for“X” 4-wayconnectors.Paint specificationnot required forHigh-Low Kits.D Discontinued 8/29/2010S Shippable by small-package carrier.48 | Systems Supplement – 3/2013DDDDDDDDDDDDDDDDDDDDD

Connectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Veneer Top Cap / Fabric TrimGSA SIN 711-1• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.“S” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.“E” End Trim Kits• End vertical cover (includes top cap trim —adds 5 ⁄8" to run).• Not for high-low applications. See page 48.“W” Wall Mount Kits• Includes top cap (finish must be specified).• Painted connector adds 1 1 ⁄16" to run.TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.TV3 . P .ShipDescription Model Weight Cubes List Price“S” Extended Straight Connector Kits — Radius Veneer Top Cap and Fabric Trim13"H stacking/segmented TV313SF D3 S 0.226"H stacking/segmented TV326SF D4 S 0.439"H stacking/segmented TV339SF D5 S 0.517"H base segmented TV317SF D4 S 0.430"H base panel TV330SF D5 S 0.543"H base panel TV343SF D5 S 0.556"H base panel TV356SF D6 S 0.669"H base panel TV369SF D8 S 0.882"H base panel TV382SF D9 S 0.9“E” End Trim Kits — Radius Veneer Top Cap and Fabric Trim13"H stacking/segmented TV313EF D2 S 0.226"H stacking/segmented TV326EF D2 S 0.439"H stacking/segmented TV339EF D3 S 0.517"H base segmented TV317EF D2 S 0.430"H base panel TV330EF D3 S 0.543"H base panel TV343EF D3 S 0.556"H base panel TV356EF D3 S 0.669"H base panel TV369EF D4 S 0.882"H base panel TV382EF D5 S 0.9ShipSelectDescription Model Weight Cubes List Price List Price“W” Wall Mount Kits — Radius Veneer Top Cap and Fabric Trim13"H stacking/segmented TV313WP 2 0.2 $ 198 $ 22126"H stacking/segmented TV326WP 2 0.4 $ 229 $ 25230"H base panel TV330WP 2 0.4 $ 261 $ 28443"H base panel TV343WP 3 0.5 $ 262 $ 28556"H base panel TV356WP 3 0.6 $ 294 $ 31769"H base panel TV369WP 4 0.8 $ 310 $ 33382"H base panel TV382WP 5 0.9 $ 360 $ 3831st Option:Paint(Base Cover):See inside frontcover for finishes.2nd Option:Fabric(Surface):See inside backcover for fabrics.Example: TV313WP.P27.SC777.3rd Option:VeneerTop Cap Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Note: Fabricspecificationnot required for“W” Wall MountKits.D Discontinued 8/29/2010S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 49DDDDDDDDDDDDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Veneer Top Cap / Veneer TrimGSA SIN 711-1• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 3.4Model Numberfrom above.1st Option:Paint(Base Cover):See inside frontcover for finishes.TV3 . P .“L” 90° Connector Kits — Radius Veneer Top Cap and Veneer Trim13"H26"H39"H17"H30"H43"H56"H69"H82"Hstacking/segmentedstacking/segmentedstacking/segmentedbase panelbase panelbase panelbase panelbase panelbase panelTV313LVTV326LVTV339LVTV317LVTV330LVTV343LVTV356LVTV369LVTV382LV234344567SSSSSSSSS0.20.40.50.40.50.50.60.80.9$ 369$ 453$ 536$ 423$ 499$ 554$ 643$ 746$ 829“T” 3-way Connector Kits — Radius Veneer Top Cap and Veneer Trim13"H26"H39"H17"H30"H43"H56"H69"H82"Hstacking/segmentedstacking/segmentedstacking/segmentedbase panelbase panelbase panelbase panelbase panelbase panelTV313TVTV326TVTV339TVTV317TVTV330TVTV343TVTV356TVTV369TVTV382TV234344567SSSSSSSSS0.20.40.50.40.50.50.60.80.9$ 333$ 397$ 469$ 380$ 423$ 489$ 559$ 635$ 730“X” 4-way Connector Kits — Radius Veneer Top Cap and Veneer Trim13"H26"H30"H43"H56"H69"H82"Hstacking/segmentedstacking/segmentedbase panelbase panelbase panelbase panelbase panelTV313XPTV326XPTV330XPTV343XPTV356XPTV369XPTV382XP2222333SSSSSSS0.20.20.20.20.20.20.2$ 198$ 229$ 245$ 262$ 294$ 310$ 3602nd Option:VeneerTop Cap Typeand Finish:See inside frontcover for finishes.Example: TV313TV.P27.NE800“L” and “T” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.“X” Connector Kits• Includes top cap and connectors.• Connector adds 3 1 ⁄2" to run.ShipDescription Model Weight Cubes List PriceS prefix for StratawoodN prefix for Natural 1Note: Paint specification notrequired for “X” 4-wayconnectors.Shippable by small-package carrier.50 | Systems Supplement – 3/2013S

Connectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Veneer Top Cap / Veneer Trim• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.“S” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.• Connector adds 3 1 ⁄2" to run.High-low End Trim Kits• End vertical cover (includes top cap).GSA SIN 711-1TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.TV3 V . P .ShipDescription Model Weight Cubes List Price“S” Extended Straight Connector Kits — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TV313SV 3 S 0.2 $ 45926"H stacking/segmented TV326SV 4 S 0.4 $ 55239"H stacking/segmented TV339SV 5 S 0.5 $ 65817"H base segmented TV317SV 4 S 0.4 $ 47530"H base panel TV330SV 5 S 0.5 $ 60843"H base panel TV343SV 5 S 0.5 $ 75356"H base panel TV356SV 6 S 0.6 $ 87269"H base panel TV369SV 8 S 0.8 $100982"H base panel TV382SV 9 S 0.9 $1193High-Low End Trim Kits — Radius Veneer Top Cap and Veneer Trim (for all high-low applications)13"H TV313HV 2 S 0.2 $ 38026"H TV326HV 2 S 0.4 $ 42739"H TV339HV 3 S 0.5 $ 4861st Option:Paint(Base Cover):See inside frontcover for finishes.2nd Option:VeneerTop Cap Typeand Finish:See inside frontcover for finishes.Example: TV313SV.P27.NE800S prefix for StratawoodN prefix for Natural 1Note: Paint specification notrequired for High-Low kits.Systems Supplement – 3/2013 allsteeloffice.com | 51TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Veneer Top Cap / Veneer TrimGSA SIN 711-1• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 3.4Model Numberfrom above.1st Option:Paint(Base Cover):See inside frontcover for finishes.TV3 . P .ShipDescription Model Weight Cubes List Price2-Way 120° Connector — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented26"H stacking/segmented39"H stacking/segmented30"H base panel43"H base panel56"H base panel69"H base panel82"H base panelTV313BVTV326BVTV339BVTV330BVTV343BVTV356BVTV369BVTV382BV23434567SSSSSSSS0.20.40.50.40.50.60.80.9$ 369$ 453$ 536$ 499$ 554$ 643$ 746$ 8293-Way 120° Connector — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented26"H stacking/segmented39"H stacking/segmented30"H base panel43"H base panel56"H base panel69"H base panel82"H base panelTV313CPTV326CPTV339CPTV330CPTV343CPTV356CPTV369CPTV382CP22222333SSSSSSSS0.20.20.20.20.20.20.20.2$ 198$ 229$ 247$ 245$ 262$ 294$ 310$ 3602nd Option:VeneerTop Cap Typeand Finish:See inside frontcover for finishes.Example: TV313BV.P27.NE8002-Way 120° Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.3-Way 120° Connector Kits• Includes top cap and connectors.S prefix for StratawoodN prefix for Natural 1Shippable by small-package carrier.52 | Systems Supplement – 3/2013S

Connectors Terrace 3.4 — Connector Kits 3.4 to 3.4Radius — Veneer Top Cap / Veneer Trim• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.“E” End Trim Kits• End vertical cover (includes top cap trim —adds 5 ⁄8" to run).“W” Wall Mount Kits• Includes top cap (finish must be specified).• Painted connector adds 1 1 ⁄16" to run.GSA SIN 711-1TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.TV3 . P .ShipSelectDescription Model Weight Cubes List Price List Price“E” End Trim Kits — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TV313EV 2 S 0.2 $ 315 N/A26"H stacking/segmented TV326EV 2 S 0.4 $ 338 N/A39"H stacking/segmented TV339EV 3 S 0.5 $ 359 N/A17"H base panel TV317EV 2 S 0.3 $ 339 N/A30"H base panel TV330EV 2 S 0.4 $ 357 N/A43"H base panel TV343EV 3 S 0.5 $ 393 N/A56"H base panel TV356EV 3 S 0.6 $ 454 N/A69"H base panel TV369EV 4 S 0.8 $ 537 N/A82"H base panel TV382EV 5 S 0.9 $ 594 N/A“W” Wall Mount Kits — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TV313WP 2 0.2 $ 198 $ 22126"H stacking/segmented TV326WP 2 0.4 $ 229 $ 25230"H base panel TV330WP 2 0.4 $ 261 $ 28443"H base panel TV343WP 3 0.5 $ 262 $ 28556"H base panel TV356WP 3 0.6 $ 294 $ 31769"H base panel TV369WP 4 0.8 $ 310 $ 33382"H base panel TV382WP 5 0.9 $ 360 $ 3831st Option:Paint(Base Cover):See inside frontcover for finishes.2nd Option:VeneerTop Cap Typeand Finish:See inside frontcover for finishes.Example: TV313EV.P27.NE800S prefix for StratawoodN prefix for Natural 1Systems Supplement – 3/2013 allsteeloffice.com | 53TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors“M” Off-Module Connector Kits• Connectors (black only — does not add tolength of run) — allow for off-moduleconnections.• Attaching hardware.• Available for all Trim options.• Back-to-back panel installations capability asof 12/15/2004.• Kits produced prior to 12/15/2004 are notcompatible with new-style kits.How to specify —Select theTerrace 3.4Model Numberfrom above.T“M” Off-module Connector KitTerrace 3.4 — Connector KitsShipListDescription Model Weight Cubes PriceOne Kit (Flat Profile Trim) TT3MP 4 S 0.2 $ 191One Kit (Radius or Veneer Trim) TR3MP 4 S 0.2 $ 191Example: TT3MPFor specification details refer toWorking with Frames, pages 18-21Overview of Frames, pages 22-23Shippable by small-package carrier.54 | Systems Supplement – 3/2013SGSA SIN 711-1

NotesTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 55

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesTile Hinge Kits• 2 steel hinges for one 20" - 30"W tile.• 3 steel hinges for one 36" - 60"W tile.• Tile Hinge Kits can be used at any tilelocation, including attachment to segmentkits. Kits are dependent on tile width ratherthan height. Order one kit per tile.• Cannot be used on Reach storage units.Select theTerrace 3.4Model Numberfrom above.TT20"W / 30"W36"W / 42"W / 48"W / 60"WTackable Acoustical Tileattached to panel withAccess MechanismAttachments shown on backof tileNOTE: Tiles not included —must be specifiedseparately.How to specify —Tile Hinge Kits – (steel-1 hinge kit per tile)Terrace 3.4 — Tile Hinge Kits / Beltline Access MechanismShipListDescription Model Weight Cubes Price20"- 30"W TTHK2 D D2 S 0.636"- 60"W TTHK3 D D2 S 0.6Beltline Cable Access Mechanism — Single-SidedFor 24"W Tiles TT224AS D5 .22For 30"W Tiles TT230AS D5 .22For 36"W Tiles TT236AS D7 .33For 42"W Tiles TT242AS D7 .33For 48"W Tiles TT248AS D9 .49For 60"W Tiles TT260AS D9 .49Beltline Cable Access Mechanism — Double-SidedFor 24"W Tiles TT224AD D6 .22For 30"W Tiles TT230AD D6 .22For 36"W Tiles TT236AD D7 .33For 42"W Tiles TT242AD D7 .33For 48"W Tiles TT248AD D9 .49For 60"W Tiles TT260AD D9 .49Example: TTHK2Beltline Cable Access Mechanism• Attaching hardware included withmechanism.• Arch pull at top of tile allows easy openingand closing. Pull in black only.• Cannot be used on a fabric tile that has aveneer tile on the other side of the frame.• Field-installable into any 13" panel frameopening.• Cannot be used on Reach storage units.• For accessing electrical, a double-sidedmechanism must be ordered; for accessingdata, a single-sided mechanism may beordered.For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29• Allows access to non-ported beltline electrical.Access Mechanisms can be used on tackabletiles only, not for use on veneer, steel mesh,hard surface, and tool tiles.• Adequate clear space must be allowed abovea tile mounted with the Access Mechanism —the mechanism raises the tile 5 1 ⁄4" when inopen position.Shippable by small-package carrier.56 | Systems Supplement – 3/2013SGSA SIN 711-1D D Discontinued 2/12/2012D Discontinued 8/29/2010D DD DDDDDDDDDDDDD

TilesTackable Acoustical Tiles• Tackable acoustical tile (with factory installedattachment clips).• For monolithic tiles see pages 60-61.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).Terrace 3.4 — Tackable Acoustical TilesFor specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29GSA SIN 711-1TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.TT4 T .ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 613"H Tackable Acoustical Tiles20"W TT41320T 2.5 S 0.3 $ 97 $104 $111 $124 $153 $16924"W TT41324T 3 S 0.4 $ 99 $107 $113 $126 $156 $17330"W TT41330T 3 S 0.5 $108 $120 $128 $157 $183 $20336"W TT41336T 4 S 0.6 $124 $136 $146 $179 $204 $21942"W TT41342T 4 S 0.7 $129 $142 $151 $184 $208 $22348"W TT41348T 5 S 0.8 $139 $152 $161 $196 $219 $23660"W TT41360T 6 S 1.0 $150 $162 $173 $210 $229 $24626"H Tackable Acoustical Tiles20"W TT42620T 4.2 S 0.7 $137 $150 $157 $182 $207 $24124"W TT42624T 5 S 0.8 $138 $151 $160 $183 $209 $24430"W TT42630T 6 S 1.0 $145 $158 $168 $206 $236 $28036"W TT42636T 7 S 1.1 $167 $183 $197 $247 $283 $33242"W TT42642T 9 S 1.3 $188 $204 $216 $269 $307 $36148"W TT42648T 10 S 1.5 $194 $209 $222 $275 $315 $37160"W TT42660T 12 S 1.9 $207 $225 $243 $299 $342 $38439"H Tackable Acoustical Tiles (Only for use above beltline.)20"W TT43920T 7 S 0.9 $170 $186 $200 $226 $258 $29924"W TT43924T 8 S 1.1 $171 $187 $201 $228 $262 $30330"W TT43930T 10 S 1.4 $183 $199 $211 $263 $300 $35536"W TT43936T 12 S 1.7 $222 $244 $262 $319 $368 $43642"W TT43942T 14 1.9 $244 $266 $288 $354 $401 $47548"W TT43948T 16 2.2 $254 $277 $299 $369 $422 $496Packaging: Tiles will be multi-packed to reduce packaging materials and to provide better structural support duringshipping. Items requiring individual shipping should be tagged on the order with different descriptivelocations to simplify the staging process.1st Option:Fabric:See inside backcover for fabrics.Example: TT41324T.CS918Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 57STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesTackable Super Acoustical Tiles• Tackable super acoustical tile (with factoryinstalled attachment clips).• Use of Tackable Super Acoustical Tiles limitscable capacity of system — see page 148.• For monolithic tiles see pages 60-61.• Not for use on Reach storage units.How to specify —Select theTerrace 3.4Model Numberfrom above.TT4 A.Terrace 3.4 — Tackable Super Acoustical TilesShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 613"H Tackable Super Acoustical Tiles24"W TT41324A 3 S 0.4 $139 $147 $153 $166 $188 $21330"W TT41330A 4 S 0.5 $150 $162 $170 $199 $225 $24536"W TT41336A 4 S 0.6 $170 $182 $192 $225 $250 $26542"W TT41342A 5 S 0.7 $184 $197 $206 $239 $263 $27848"W TT41348A 6 S 0.8 $195 $208 $217 $252 $275 $29260"W TT41360A 8 S 1.0 $207 $219 $234 $267 $286 $30326"H Tackable Super Acoustical Tiles24"W TT42624A 6 S 0.8 $193 $206 $215 $238 $264 $29930"W TT42630A 7 S 1.0 $201 $214 $224 $262 $292 $33636"W TT42636A 9 S 1.1 $239 $255 $269 $319 $355 $40442"W TT42642A 10 S 1.3 $260 $276 $288 $341 $379 $43348"W TT42648A 11 S 1.5 $271 $286 $299 $352 $392 $44860"W TT42660A 12 S 1.9 $291 $309 $327 $383 $426 $46839"H Tackable Super Acoustical Tiles (Only for use above beltline.)24"W TT43924A 9 S 1.1 $237 $253 $267 $294 $328 $36930"W TT43930A 11 S 1.4 $255 $271 $283 $335 $372 $42736"W TT43936A 13 S 1.7 $310 $332 $350 $407 $456 $46842"W TT43942A 14 1.9 $342 $364 $386 $452 $499 $57348"W TT43948A 17 2.2 $356 $379 $401 $471 $524 $598Packaging: Tiles will be multi-packed to reduce packaging materials and to provide better structural support duringshipping. Items requiring individual shipping should be tagged on the order with different descriptivelocations to simplify the staging process.1st Option:Fabric:See inside backcover for fabrics.Example: TT41324A.CS918For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29Shippable by small-package carrier.58 | Systems Supplement – 3/2013SGSA SIN 711-1

TilesTerrace 3.4 — Port TilesPort Tiles• 13"H data/electrical port tile (withfactory-installed attachment clips).• Receptacle openings with blank covers (1 in24"W tiles; 2 in wider tiles).• If desired, tiles can be rotated 180° to provideports at the top of the tile when used as anon-electrical data port tile.• Receptacle openings have the ability to acceptmost commercially available modular datafaceplates.• Use of electrical power harnesses requireElectrical Mounting Brackets orderedseparately. See page 159.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29GSA SIN 711-1TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 613"H Port Tiles (Tackable, Acoustical)24"W TT41324E 3 S 0.7 $177 $185 $191 $204 $226 $25130"W TT41330E 3 S 0.8 $184 $196 $204 $233 $259 $27936"W TT41336E 4 S 0.9 $200 $212 $222 $255 $280 $29542"W TT41342E 4 S 1.1 $207 $220 $229 $262 $286 $30148"W TT41348E 5 S 1.3 $215 $228 $237 $272 $295 $31260"W TT41360E 6 S 1.6 $226 $238 $249 $286 $305 $3221st Option:Fabric:See inside backcover for fabrics.TT413 E. .Example: TT41324E.CS918.E92nd Option:Electrical GrommetColor:See inside front coverfor finishes.EShippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 59STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesMonolithic Tackable Acoustical Tiles• Monolithic tile (with factory-installedattachment clips).• Specify the size that matches frame size. Onetile per side.• Tackable and acoustical.• 20"W tiles specified for Reach “E” panelframes.How to specify —Select theTerrace 3.4Model Numberfrom above.TT9 T .ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 61st Option:Fabric:See inside backcover for fabrics.Example: TT96936T.CS918Terrace 3.4 — Monolithic Tackable Acoustical Tiles• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).GSA SIN 711-1For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 2943"H Monolithic Tackable Acoustical Tiles20"W TT94320T 6.7 S 1.4 $ 185 $ 205 $ 236 $ 278 $ 300 $ 35424"W TT94324T 8 S 1.7 $ 188 $ 210 $ 240 $ 282 $ 305 $ 36030"W TT94330T 10 S 2.1 $ 195 $ 217 $ 247 $ 288 $ 319 $ 37236"W TT94336T 12 S 2.5 $ 239 $ 266 $ 288 $ 349 $ 383 $ 46142"W TT94342T 14 2.9 $ 259 $ 286 $ 314 $ 378 $ 430 $ 51248"W TT94348T 16 3.3 $ 275 $ 303 $ 332 $ 398 $ 460 $ 54560"W TT94360T 18 4.1 $ 303 $ 331 $ 363 $ 438 $ 509 $ 60756"H Monolithic Tackable Acoustical Tiles20"W TT95620T 7.5 1.9 $ 223 $ 245 $ 267 $ 316 $ 369 $ 43324"W TT95624T 9 2.3 $ 226 $ 249 $ 270 $ 320 $ 374 $ 44030"W TT95630T 11 2.8 $ 237 $ 260 $ 281 $ 338 $ 395 $ 46436"W TT95636T 13 3.3 $ 278 $ 309 $ 336 $ 405 $ 472 $ 55642"W TT95642T 15 3.8 $ 303 $ 331 $ 363 $ 438 $ 509 $ 59748"W TT95648T 18 4.3 $ 312 $ 342 $ 369 $ 449 $ 526 $ 61560"W TT95660T 20 5.4 $ 335 $ 373 $ 408 $ 486 $ 569 $ 66869"H Monolithic Tackable Acoustical Tiles20"W TT96920T 9 2.3 $ 298 $ 325 $ 354 $ 425 $ 493 $ 57824"W TT96924T 11 2.8 $ 302 $ 329 $ 359 $ 431 $ 502 $ 58930"W TT96930T 14 3.4 $ 321 $ 352 $ 381 $ 464 $ 543 $ 63436"W TT96936T 16 4.1 $ 369 $ 417 $ 451 $ 540 $ 631 $ 74142"W TT96942T 20 4.7 $ 408 $ 455 $ 488 $ 590 $ 687 $ 80648"W TT96948T 23 5.4 $ 424 $ 468 $ 503 $ 609 $ 712 $ 83460"W TT96960T 26 6.7 $ 454 $ 504 $ 546 $ 660 $ 770 $ 905Packaging: Tiles will be multi-packed to reduce packaging materials and to provide better structural support duringshipping. Items requiring individual shipping should be tagged on the order with different descriptivelocations to simplify the staging process.Shippable by small-package carrier.60 | Systems Supplement – 3/2013S

TilesMonolithic Port Tiles• Monolithic port tile (with factory-installedattachment clips).• Receptacle openings with blank covers (1 in24"W tiles; 2 in wider tiles)• Tackable Acoustical.• Specify the size that matches the frame size.One tile per side.• Monolithic tiles and segment tiles can be usedon opposite sides of frame to create variousaesthetics.• Receptacle openings have the ability to acceptmost commercially available modular datafaceplates.• Data port cut out dimension is1.531"H x 2.859"W.• Grommet opening dimension is1.375"H x 2.700"W.• Use of electrical power harnesses requireElectrical Mounting Brackets orderedseparately. See page 159.Terrace 3.4 — Monolithic Port TilesFor specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29GSA SIN 711-1• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 643"H Monolithic Port Tiles24"W TT94324E 8 S 1.7 $ 259 $ 281 $ 311 $ 353 $ 376 $ 43130"W TT94330E 10 S 2.1 $ 272 $ 294 $ 324 $ 365 $ 396 $ 44936"W TT94336E 12 S 2.5 $ 314 $ 341 $ 363 $ 424 $ 458 $ 53642"W TT94342E 14 2.9 $ 336 $ 363 $ 391 $ 455 $ 507 $ 58948"W TT94348E 16 3.3 $ 353 $ 381 $ 410 $ 476 $ 538 $ 62360"W TT94360E 18 4.1 $ 380 $ 408 $ 440 $ 515 $ 586 $ 68456"H Monolithic Port Tiles24"W TT95624E 9 2.3 $ 297 $ 320 $ 341 $ 391 $ 445 $ 51130"W TT95630E 11 2.8 $ 312 $ 335 $ 356 $ 413 $ 470 $ 53936"W TT95636E 13 3.3 $ 356 $ 387 $ 414 $ 483 $ 550 $ 63442"W TT95642E 15 3.8 $ 380 $ 408 $ 440 $ 515 $ 586 $ 67448"W TT95648E 18 4.3 $ 390 $ 420 $ 447 $ 527 $ 604 $ 69360"W TT95660E 20 5.4 $ 413 $ 451 $ 486 $ 564 $ 647 $ 74669"H Monolithic Port Tiles24"W TT96924E 11 2.8 $ 369 $ 396 $ 426 $ 498 $ 569 $ 65630"W TT96930E 14 3.4 $ 400 $ 431 $ 460 $ 543 $ 622 $ 71336"W TT96936E 16 4.1 $ 448 $ 496 $ 530 $ 619 $ 710 $ 82042"W TT96942E 20 4.7 $ 485 $ 532 $ 565 $ 667 $ 764 $ 88348"W TT96948E 23 5.4 $ 501 $ 545 $ 580 $ 686 $ 789 $ 91160"W TT96960E 26 6.7 $ 530 $ 580 $ 622 $ 736 $ 846 $ 981Packaging: Tiles will be multi-packed to reduce packaging materials and to provide better structural support duringshipping. Items requiring individual shipping should be tagged on the order with different descriptivelocations to simplify the staging process.1st Option:Fabric:See inside backcover for fabrics.TT9 E. .2nd Option:Electrical GrommetColor:See inside frontcover for finishes.EExample: TT96936E.CS928.E4Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 61STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesGlass Tiles — Double Pane• Tempered safety glass ( 1 ⁄4" thick) encasedwithin a frame with built-in shrouds.• Attach like standard fabric tiles; see page 26for location specifications.• Double-pane construction.• For use in stacking frames also.• Comes fully assembled.• Glass opening is 5 1 ⁄4" less than nominalheights and widths.How to specify —Select theTerrace 3.4Model Numberfrom above.TT4Terrace 3.4 — Glass Tiles — Double-PaneShip List Price List PriceDescription Model Weight Cubes Clear Frosted13"H Glass Tiles — Double Pane24"W TT41324GK 15 S 1.1 $ 609 $ 81130"W TT41330GK 16 S 1.2 $ 649 $ 89336"W TT41336GK 21 S 1.5 $ 675 $ 97942"W TT41342GK 23 S 1.6 $ 755 $ 108848"W TT41348GK 27 S 1.9 $ 810 $ 117960"W TT41360GK 33 S 2.4 $ 863 $ 133126"H Glass Tiles — Double Pane24"W TT42624GK 23 S 1.6 $ 823 $ 118230"W TT42630GK 29 S 1.9 $ 872 $ 131036"W TT42636GK 34 S 2.2 $ 938 $ 145842"W TT42642GK 39 S 2.5 $ 1013 $ 161448"W TT42648GK 44 S 2.9 $ 1072 $ 175660"W TT42660GK 53 S 3.7 $ 1195 $ 2042GK.1st Option:Paint:P27 Black onlyP27 .Example: TT41324GK.P27.C2nd Option:Glass:C ClearF FrostedFor specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29Shippable by small-package carrier.62 | Systems Supplement – 3/2013SGSA SIN 711-1

TilesGlass Tile Kits — Single-Pane• Clear, gray tinted or frosted tempered safetyglass with mount ing hardware.• Glass opening is 7" less than nominal heightsand widths.• Glass tile kits cannot be used at beltline andhave some other placement restrictions (seepage 26). Single-pane glass tile kits cannot beinstalled directly under a 56"H countertop,but 13"H double-pane glass kits arepermitted.Glass Tiles for Stacking Frames• Clear, gray tinted or frosted tempered safetyglass with mount ing hardware.• Trim covers (single-pane).• Single-pane glass opening is 7" less thannominal heights and widths.• Must specify stacking frame separately.Terrace 3.4 — Glass Tiles — Single-PaneFor specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29GSA SIN 711-1TERRACEFor application to stackingframes, order product belowor from page 62.For application to basepanel frames, order productabove or from page 62.How to specify —Select theTerrace 3.4Model Numberfrom above.TT4 .Ship List Price List Price Select SelectDescription Model Weight Cubes Clear Frosted Clear Frosted13"H Glass Tiles — Single-Pane24"W TT41324G D 15 S 1.130"W TT41330G D 16 S 1.236"W TT41336G D 21 S 1.542"W TT41342G D 23 S 1.648"W TT41348G D 27 S 1.960"W TT41360G D 33 S 2.426"H Glass Tiles — Single-Pane24"W TT42624G D 23 S 1.630"W TT42630G D 29 S 1.936"W TT42636G D 34 S 2.242"W TT42642G D 39 S 2.548"W TT42648G D 44 S 2.960"W TT42660G D 53 3.7Glass Tile Attachment BracketBlack only TTGAB D D 1 S .1 $ 42NOTE: For use ONLY with single-pane glazed tiles when mounting directly below beltline on frames produced after6/4/00. “A-B” location or “B” location. Refer to page 26.13"H Single-Pane Glass Tiles for Stacking24"W TT41324GS D 15 S 1.130"W TT41330GS D 16 S 1.236"W TT41336GS D 21 S 1.542"W TT41342GS D 23 S 1.648"W TT41348GS D 27 S 1.960"W TT41360GS D 33 S 2.426"H Single-Pane Glass Tiles for Stacking24"W TT42624GS D 23 S 1.630"W TT42630GS D 29 S 1.936"W TT42636GS D 34 S 2.242"W TT42642GS D 39 S 2.548"W TT42648GS D 44 S 2.960"W TT42660GS D 53 3.71st Option:Paint:See inside frontcover for finishes.P .Example: TT41324G.P02.C2nd Option:Glass:C ClearF FrostedD D Discontinued 2/12/2012D Discontinued 8/29/2010S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 63DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesPass-thru Trim Kits• Trim covers (with factory-installedattachment clips).How to specify —Select theTerrace 3.4Model Numberfrom above.TT4 P. P13"H Pass-Thru Trim Kits24"W 6"H x 16 7 ⁄8"W TT41324P D D 10 S 0.430"W 6"H x 22 7 ⁄8"W TT41330P D D 12 S 0.436"W 6"H x 28 7 ⁄8"W TT41336P D D 14 S 0.542"W 6"H x 34 7 ⁄8"W TT41342P D D 16 S 0.548"W 6"H x 40 7 ⁄8"W TT41348P D D 19 S 0.660"W 6"H x 46 7 ⁄8"W TT41360P D D 23 S 0.826"H Pass-Thru Trim Kits24"W 19"H x 16 7 ⁄8"W TT42624P D D 14 S 0.430"W 19"H x 22 7 ⁄8"W TT42630P D D 16 S 0.436"W 19"H x 28 7 ⁄8"W TT42636P D D 18 S 0.542"W 19"H x 34 7 ⁄8"W TT42642P D D 20 S 0.548"W 19"H x 40 7 ⁄8"W TT42648P D D 23 S 0.660"W 19"H x 46 7 ⁄8"W TT42660P D D 25 S 0.8NOTE: Pass-Thru Trim Kits have some placement restrictions (see page 26).Terrace 3.4 — Pass-Thru Trim KitsShipSelectDescription Opening Size Model Weight Cubes List Price List Price1st Option:Paint:See inside frontcover for finishes.Example: TT41324P.P02For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29Shippable by small-package carrier.64 | Systems Supplement – 3/2013SD DD DD DD DD DD DD DD DD DD DD DD DGSA SIN 711-1D D Discontinued 2/12/2012D DD DD DD DD DD DD DD DD DD DD DD D

TilesPorcelain Marker Board Tiles• White marker board tile; porcelain-coatedsteel surface (with factory-installedattachment clips). Accepts magneticaccessories.• 15" magnetically attached tray is naturalaluminum color (use is optional).• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).How to specify —Select theTerrace 3.4Model Numberfrom above.TT .High-Pressure LaminateMarker Board Tile• White marker board tile; high-pressurelaminate latches with Custom Tile BracketKit — included)• Does not include tray.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).Terrace 3.4 — Marker Board TilesShipListDescription Model Weight Cubes Price13"H Porcelain Marker Board Tiles24"W TT41324M D D4 S 0.730"W TT41330M D D4 S 0.836"W TT41336M D D5 S 1.042"W TT41342M D D5 S 1.148"W TT41348M D D6 S 1.360"W TT41360M D D7 S 1.626"H Porcelain Marker Board Tiles24"W TT42624M D D6 S 1.230"W TT42630M D D7 S 1.536"W TT42636M D D8 S 1.742"W TT42642M D D10 S 2.048"W TT42648M D D11 S 2.360"W TT42660M D D13 S 2.913"H High-Pressure Laminate Marker Board Tiles24"W TT41324NML D5 S 1.130"W TT41330NML D5 S 1.236"W TT41336NML D6 S 1.542"W TT41342NML D6 S 1.648"W TT41348NML D8 S 1.960"W TT41360NML D9 S 2.426"H High-Pressure Laminate Marker Board Tiles24"W TT42624NML D7 S 1.630"W TT42630NML D8 S 1.936"W TT42636NML D9 S 2.242"W TT42642NML D11 S 2.548"W TT42648NML D13 S 2.960"W TT42660NML D15 S 3.71st Option:HorizontalPaint Color(LaminateMarkerboard only):Black only.P27 .Example: TT41324M2nd Option:VerticalPaint Color(LaminateMarkerboard only):Black only.P27For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 65SGSA SIN 711-1D D Discontinued 2/12/2012D Discontinued 8/29/2010D DD DD DD DD DD DD DD DD DD DD DD DDDDDDDDDDDDDTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesTool Tile• Sturdy aluminum extrusion with steel supportconstruction.• Powder-coated for durable finish.• Work Tools to be hung from this tile availablein Extensions section of this pricer.• Use in place of a standard 13"H tile.• Special Tool tile required for back side ofReach storage at top most position or belowan open top shelf. See page 281.How to specify —Select theTerrace 3.4Model Numberfrom above.TT413 SW. PShipSelectDescription Model Weight Cubes List Price List Price13"H Tool Tiles — used to support Extensions paper management accessories24"W TT41324SW 10 S 0.4 $ 249 $ 28730"W TT41330SW 12 S 0.6 $ 264 $ 30236"W TT41336SW 14 S 0.6 $ 288 $ 32642"W TT41342SW 16 S 0.7 $ 308 $ 34648"W TT41348SW 19 S 0.7 $ 324 $ 36260"W TT41360SW 23 S 0.9 $ 343 $ 3811st Option:Paint:See inside frontcover for finishes.Example: TT41324SW.P02• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).Terrace 3.4 — Tool TilesGSA SIN 711-1For specification details refer to:Working with Tiles, pages 24-28Tool Tile shown with Work Tools(Work Tools on pages 330-331)Shippable by small-package carrier.66 | Systems Supplement – 3/2013S

TilesSteel Tile• Painted steel construction.• Attaches with custom tile bracket kit —included.• Available in Core and Select paint colors.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).Terrace 3.4 — Steel TilesGSA SIN 711-1For specification details refer to:Working with Tiles, pages 24-28TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List Price13"H Steel Tiles20"W TT41320FS 8.3 S 0.4 $ 160 $ 18524"W TT41324FS 10 S 0.4 $ 162 $ 18730"W TT41330FS 12 S 0.6 $ 166 $ 19136"W TT41336FS 14 S 0.6 $ 182 $ 20742"W TT41342FS 16 S 0.7 $ 196 $ 22148"W TT41348FS 19 S 0.7 $ 215 $ 24060"W TT41360FS 23 S 0.9 $ 243 $ 26826"H Steel TilesTT4 FS . P20"W TT42620FS 12 S 0.7 $ 236 $ 27824"W TT42624FS 14 S 0.7 $ 239 $ 28130"W TT42630FS 16 S 1.0 $ 254 $ 29636"W TT42636FS 18 S 1.0 $ 286 $ 32842"W TT42642FS 20 S 1.7 $ 308 $ 35048"W TT42648FS 23 S 1.7 $ 343 $ 38560"W TT42660FS 25 S 2.8 $ 387 $ 4291st Option:Paint:See inside frontcover for finishes.Example: TT42636FS.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 67STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesSteel Mesh Tiles• Steel mesh tile.• Allows air flow when placed on each side ofpanel.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).Close-up of Steel Mesh tileHow to specify —Select theTerrace 3.4Model Numberfrom above.TT4 SM. PShipSelectDescription Model Weight Cubes List Price List Price1st Option:Paint:See inside frontcover for finishes.Example: TT41324SM.P02Terrace 3.4 — Steel Mesh TilesGSA SIN 711-1For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 2913"H Steel Mesh Tiles20"W TT41320SM 8 S 0.4 $ 227 $ 25224"W TT41324SM 10 S 0.4 $ 233 $ 25830"W TT41330SM 12 S 0.6 $ 237 $ 26236"W TT41336SM 14 S 0.6 $ 256 $ 28142"W TT41342SM 16 S 0.7 $ 281 $ 30648"W TT41348SM 19 S 0.7 $ 312 $ 33760"W TT41360SM 23 S 0.9 $ 347 $ 37226"H Steel Mesh Tiles20"W TT42620SM 11 S 0.7 $ 247 $ 28924"W TT42624SM 14 S 0.7 $ 250 $ 29230"W TT42630SM 16 S 1.0 $ 267 $ 30936"W TT42636SM 18 S 1.0 $ 308 $ 35042"W TT42642SM 20 S 1.7 $ 326 $ 36848"W TT42648SM 23 S 1.7 $ 366 $ 40860"W TT42660SM 25 S 2.8 $ 416 $ 458Shippable by small-package carrier.68 | Systems Supplement – 3/2013S

TilesTerrace 3.4 — Infinite Spectrum TilesInfinite Spectrum Tiles• 1 ⁄4" thick custom tile attaches with CustomTile Bracket Kit — included.• Applicable to 13"H and 26"H panelsegments and all panel widths.• Infinite Spectrum is a color-matched 100%recyclable polyester resin material.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).How to specify —Select theTerrace 3.4Model Numberfrom above.ShipListDescription Model Weight Cubes Price13"H Infinite Spectrum Tiles20"W TT41320SP D8.3 0.424"W TT41324SP D10 0.430"W TT41330SP D12 0.636"W TT41336SP D14 0.642"W TT41342SP D16 0.748"W TT41348SP D19 0.760"W TT41360SP D23 0.926"H Infinite Spectrum Tiles20"W TT42620SP D12 0.724"W TT42624SP D14 0.730"W TT42630SP D16 1.036"W TT42636SP D18 1.042"W TT42642SP D20 1.748"W TT42648SP D23 1.760"W TT42660SP D25 2.81st Option:PANTONE Color:Use print or paints andinteriors color guidenumber.TT4 . .• Specify PANTONE ® color using a PANTONEprint or paints and interiors color guidenumber or PANTONE MATCHINGSYSTEM ® . When using the print color guide,use the uncoated (U) color references.• Visit pantone.com for additional PANTONEinformation.• Sample kit required to confirm PANTONEcolor meets expectations.• Review of PANTONE sample and customerapproval required prior to order entry.2nd Option:HorizontalPaint Color:Black only.P27 .For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 293rd Option:VerticalPaint Color :Black only.P27D Discontinued 8/29/2010Examples: TT42624SP.19-1759TPX.P27.P27Systems Supplement – 3/2013 TT4SPSK.658U.P27.P27allsteeloffice.com | 69DDDDDDDDDDDDDDTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

TilesTerrace 3.4 — Foundation TilesFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFoundation Tiles• 1 ⁄4" thick custom tile attaches with CustomTile Bracket Kit — included.• Applicable to 13"H and 26"H panelsegments and all panel widths.• Fabric laminated between recyclable PETGresin sheets.• 20"W tiles specified for Reach “E” panelframes.How to specify —Select theTerrace 3.4Model Numberfrom above.TT4ShipDescription Model Weight Cubes List PriceFD.Example: TT42630FD.FD03.P27.P27• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).GSA SIN 711-1For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 2913"H Foundation Tiles20"W TT41320FD D D8.3 0.424"W TT41324FD D D10 0.430"W TT41330FD D D12 0.636"W TT41336FD D D14 0.642"W TT41342FD D D16 0.748"W TT41348FD D D19 0.760"W TT41360FD D D23 0.926"H Foundation Tiles20"W TT42620FD D D12 0.724"W TT42624FD D D14 0.730"W TT42630FD D D16 1.036"W TT42636FD D D18 1.042"W TT42642FD D D20 1.748"W TT42648FD D D23 1.760"W TT42660FD D D25 2.81st Option:FoundationColors:FD01 SandFD02 TaupeFD03 CaramelFD04 Pure WhiteFD05 FlintFD .2nd Option:HorizontalPaint Color:Black only.P27 .3rd Option:VerticalPaint Color:Black only.P27D D Discontinued 2/12/201270 | Systems Supplement – 3/2013D DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesMulberry Paper Tiles• 1 ⁄4" thick custom tile attaches withCustom Tile Bracket Kit — included.• Applicable to 13"H and 26"H panelsegments and all panel widths.• Color for Mulberry Paper must bespecified — see options below.• Mulberry Paper material is laminatedbetween two PETG sheets.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).• Prior to 12/07/2003 this product was offeredwith overlap. Overlap is no longer available.Terrace 3.4 — Mulberry Paper TilesFor specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29GSA SIN 711-1Mulberry Paper Tile(without overlap)TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.TT4ShipDescription Model Weight Cubes List Price13"H Mulberry Paper Tiles (without overlap)20"W TT41320SMP D D8.3 0.424"W TT41324SMP D D10 0.430"W TT41330SMP D D12 0.636"W TT41336SMP D D14 0.642"W TT41342SMP D D16 0.748"W TT41348SMP D D19 0.760"W TT41360SMP D D23 0.926"H Mulberry Paper Tiles (without overlap)20"W TT42620SMP D D12 0.724"W TT42624SMP D D14 0.730"W TT42630SMP D D16 1.036"W TT42636SMP D D18 1.042"W TT42642SMP D D20 1.748"W TT42648SMP D D23 1.760"W TT42660SMP D D25 2.8SMP.1st Option:Mulberry Paper(without overlap)Colors:SMP01SMP02MojaveGobiSMP .2nd Option:HorizontalPaint Color:Black only.P27 .Example: TT41324SMP.SMP02.P27.P273rd Option:VerticalPaint Color:Black only.P27D D Discontinued 2/12/2012Systems Supplement – 3/2013 allsteeloffice.com | 71D DD DD DD DD DD DD DD DD DD DD DD DD DD DTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

TilesTerrace 3.4 — Pearlescent Strata TilesFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEPearlescent Strata Tiles• 1 ⁄4" thick custom tile attaches with CustomTile Bracket Kit — included.• Applicable to 13"H and 26"H panelsegments and all panel widths.• 100% recyclable polyester resin material.Select theTerrace 3.4Model Numberfrom above.TT4 PS .ShipDescription Model Weight Cubes List PriceExample: TT422624PS.PS01.P27.P27• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).GSA SIN 711-1For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 2913"H Pearlescent Strata Tiles20"W TT41320PS D D8.3 0.424"W TT41324PS D D10 0.430"W TT41330PS D D12 0.636"W TT41336PS D D14 0.642"W TT41342PS D D16 0.748"W TT41348PS D D19 0.760"W TT41360PS D D23 0.926"H Pearlescent Strata Tiles20"W TT42620PS D D12 0.724"W TT42624PS D D14 0.730"W TT42630PS D D16 1.036"W TT42636PS D D18 1.042"W TT42642PS D D20 1.748"W TT42648PS D D23 1.760"W TT42660PS D D25 2.81st Option:PearlescentStrata Colors:PS01PS02PS03PS04PS05PS07GlacierShadowSea Foam !ShellTortoiseQuartzPS .2nd Option:HorizontalPaint Color:Black only.P27 .3rd Option:VerticalPaint Color:Black only.P27Pattern DirectionHow to specify — ! De-emphasized 3/1/2009D D Discontinued 2/12/201272 | Systems Supplement – 3/2013D DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesTerrace 3.4 — Frequency TilesFrequency Tiles• 1 ⁄4" thick custom tile attaches with CustomTile Bracket Kit — included.• Applicable to 13"H and 26"H panelsegments and all panel widths.• 100% recyclable polyester resin material.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29TERRACEPattern DirectionHow to specify —Select theTerrace 3.4Model Numberfrom above.TT4ShipDescription Model Weight Cubes List Price13"H Frequency Tiles20"W TT41320FQ D8.3 0.424"W TT41324FQ D10 0.430"W TT41330FQ D12 0.636"W TT41336FQ D14 0.642"W TT41342FQ D16 0.748"W TT41348FQ D19 0.760"W TT41360FQ D23 0.926"H Frequency Tiles20"W TT42620FQ D12 0.724"W TT42624FQ D14 0.730"W TT42630FQ D16 1.036"W TT42636FQ D18 1.042"W TT42642FQ D20 1.748"W TT42648FQ D23 1.760"W TT42660FQ D25 2.8FQ.1st Option:FrequencyColors:FQ01 PlatinumFQ02 ParchmentFQ .2nd Option:HorizontalPaint Color:Black only.P27 .Example: TT42624FQ.FQ02.P27.P273rd Option:VerticalPaint Color:Black only.P27D Discontinued 8/29/2010Systems Supplement – 3/2013 allsteeloffice.com | 73DDDDDDDDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesHard Surface Tiles• Melamine-coated MDF construction.• Attaches with custom tile bracket kit —included.• Available in three laminate colors:Whitestone, Beigestone and Black.• 20"W tiles specified for Reach “E” panelframes.How to specify —Select theTerrace 3.4Model Numberfrom above.TT4 NHS .• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).13"H Hard Surface Tiles20"W TT41320NHS D D 8.3 S 0.424"W TT41324NHS D D 10 S 0.430"W TT41330NHS D D 12 S 0.636"W TT41336NHS D D 14 S 0.642"W TT41342NHS D D 16 S 0.748"W TT41348NHS D D 19 S 0.760"W TT41360NHS D D 23 S 0.926"H Hard Surface Tiles20"W TT42620NHS D D 12 S 0.724"W TT42624NHS D D 14 S 0.730"W TT42630NHS D D 16 S 1.036"W TT42636NHS D D 18 S 1.042"W TT42642NHS D D 20 S 1.748"W TT42648NHS D D 23 S 1.760"W TT42660NHS D D 25 S 2.8Terrace 3.4 — Hard Surface TilesShipListDescription Model Weight Cubes Price1st Option:Laminate:TM33 WhitestoneTM41 BeigestoneWAA3 BlackExample: TT41324NHS.WAA3.P27.P27.2nd Option:HorizontalPaint Color:Black only.P27 .3rd Option:VerticalPaint Color:Black only.P27For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29Shippable by small-package carrier.74 | Systems Supplement – 3/2013SGSA SIN 711-1D D Discontinued 2/12/2012D DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesCustom Tile Bracket Kits• Tile attachment kit allows for any approved1⁄4" thick “rigid” material to be used as aTerrace tile.• Kit available only in black.• One kit required for each tile.• Applicable to 13"H and 26"H panelsegments and all panel widths.• Use supplied dimensions below for tile size.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).Terrace 3.4 — Custom Tile Bracket KitsGSA SIN 711-1For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29TERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.TT4CK .ShipDescription Model Weight Cubes List PriceCustom Tile Bracket Kit — 13"H Tiles for Segmentation20"W TT4CK1320 D D1.0 S 0.424"W TT4CK1324 D D1.0 S 0.430"W TT4CK1330 D D1.0 S 0.436"W TT4CK1336 D D1.0 S 0.542"W TT4CK1342 D D1.0 S 0.548"W TT4CK1348 D D2.0 S 0.660"W TT4CK1360 D D2.0 S 0.8Custom Tile Bracket Kit — 26"H Tiles for Segmentation20"W TT4CK2620 D D1.0 S 1.024"W TT4CK2624 D D3.0 S 1.030"W TT4CK2630 D D4.0 S 1.036"W TT4CK2636 D D5.0 S 1.042"W TT4CK2642 D D5.0 S 1.048"W TT4CK2648 D D6.0 S 1.060"W TT4CK2660 D D6.0 S 1.0Custom Material used in the Custom Tile Brackets should be sized according to these dimensions:Actual Dimensions neededActual Dimensions neededStandard Tile Size for Custom Tile Kit Standard Tile Size for Custom Tile Kit13"H x 20"W 12.531"H x 19.445"W 26"H x 20"W 25.531"H x 19.445"W13"H x 24"W 12.531"H x 23.445"W 26"H x 24"W 25.531"H x 23.445"W13"H x 30"W 12.531"H x 29.445"W 26"H x 30"W 25.531"H x 29.445"W13"H x 36"W 12.531"H x 35.445"W 26"H x 36"W 25.531"H x 35.445"W13"H x 42"W 12.531"H x 41.445"W 26"H x 42"W 25.531"H x 41.445"W13"H x 48"W 12.531"H x 47.445"W 26"H x 48"W 25.531"H x 47.445"W13"H x 60"W 12.531"H x 59.445"W 26"H x 60"W 25.531"H x 59.445"WThickness of custom material must be 1 ⁄4" thick ±.030".1st Option:HorizontalPaint Color :Black only.P27 .2nd Option:VerticalPaint Color :Black only.P27Example: TT4CK1336.P27.P27D D Discontinued 2/12/2012S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 75D DD DD DD DD DD DD DD DD DD DD DD DD DD DTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

TilesTerrace 3.4 — Veneer TilesFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEVeneer Tiles• Veneer tiles produced by Gunlocke availablein Cleargrain or Natural 1 veneer.• Tiles ship with factory-installed attachmentclips.• Cleargrain veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 3.4Model Numberfrom above.TT4 V.Ship Cleargrain Natural 1Description Model Weight Cubes List Price List Price13"H Veneer Tiles20"W TT41320V D D2.5 S 0.424"W TT41324V D D3 S 0.430"W TT41330V D D3 S 0.536"W TT41336V D D4 S 0.642"W TT41342V D D4 S 0.748"W TT41348V D D5 S 0.860"W TT41360V D D6 S 1.026"H Veneer Tiles20"W TT42620V D D5 S 0.724"W TT42624V D D6 S 0.830"W TT42630V D D7 S 1.036"W TT42636V D D8 S 1.242"W TT42642V D D9 S 1.448"W TT42648V D D10 S 1.660"W TT42660V D D12 S 2.043"H Veneer Tiles20"W TT44320V D D7.5 S 1.024"W TT44324V D D9 S 1.230"W TT44330V D D10.5 S 1.536"W TT44336V D D12 S 1.842"W TT44342V D D13.5 S 2.148"W TT44348V D D15 S 2.41st Option:VeneerType and Finish:See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1Example: TT41324V.CC215• If two or more natural veneer tiles arevertically adjacent, Natural Veneer Tile Setsshould be ordered to carry the grain pattern.See page 78.• Cannot be used with a double-sided accessmechanism, but can be used opposite a singlesided access mechanism.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).GSA SIN 711-1For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29Cleargrain Veneer TileNatural 1 Veneer TileD D Discontinued 2/12/2012S Shippable by small-package carrier.76 | Systems Supplement – 3/2013D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesTerrace 3.4 — Veneer Port TilesVeneer Port Tiles• Veneer Port Tiles by Gunlocke, available inCleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Receptacle openings — 1 in 24"W tiles; 2 inwider tiles.How to specify —Select theTerrace 3.4Model Numberfrom above.TT4Ship Cleargrain Natural 1Description Model Weight Cubes List Price List Price13"H Veneer Tiles24"W TT41324VE D3.0 S 0.430"W TT41330VE D3.5 S 0.536"W TT41336VE D4.0 S 0.642"W TT41342VE D4.5 S 0.748"W TT41348VE D5.0 S 0.860"W TT41360VE D6.0 S 1.026"H Veneer Tiles24"W TT42624VE D6.0 S 0.830"W TT42630VE D7.0 S 1.036"W TT42636VE D8.0 S 1.242"W TT42642VE D9.0 S 1.448"W TT42648VE D10.0 S 1.660"W TT42660VE D12.0 S 2.0VE.1st Option:VeneerType and Finish:See inside front coverfor finishes.C prefix for CleargrainN prefix for Natural 1Example: TT41324VE.CC511• Veneer port tiles do not support modular datafaceplates.• If two or more Natural Veneer tiles arevertically adjacent, special Natural VeneerTile Sets should be ordered to carry the grainpattern. (See page 78.) Call Customer Supportto process special request.• Use of electrical power harnesses requireElectrical Mounting Brackets orderedseparately. See page 159.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).For specification details refer to:Working with Tiles, pages 24-28Overview of Tiles, page 29Cleargrain Veneer TileShippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 77SNatural 1 Veneer TileDDDDDDDDDDDDD Discontinued 8/29/2010DDDDDDDDDDDDTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesNatural Veneer Tile Sets for Terrace 3.4• Natural veneer tile sets are used when 2 or more naturalveneer tiles are vertically adjacent to each other on the samepanel (see illustration below) in order to maximize the beautyof real wood and carry the grain pattern from tile to tile.• Tile sets do not apply to Cleargrain tiles, as the grain patternis consistent from tile to tile.13"H NaturalVeneer Tile13"H NaturalVeneer TileRequires a39"H Tile Set(Set – 2P)Does NOTRequire aTile Set26"H NaturalVeneer TileRecommended52"H Tile Set(Set – 2Q)Specifying Terrace 3.4 Standard Natural Veneer Tile Sets1. Determine the height of the natural veneer tile set andreference the appropriate page of the pricer:• 26"H and 39"H sets are on page 79• 52"H and 65"H sets are on page 80• 78"H and 91"H sets are on page 81a. To calculate set height simply add the heights of the tiles inthe set (example two 13"H tiles would require a 26"H tileset — see illustration above).b. Panel frames and base tiles are inflated by the 4" height ofthe panel base.• A 65"H tile set will fill a 69" panel frame• A 43"H base tile is only 39" high2. Find the column with the desired tile configuration.3. Find the row with the correct tile set width to get theappropriate model logic and pricing.All possible tile set configurations are not shown.Note1. Tile sets MUST remain together throughout the ordering,manufacturing and installation process in order to maximizethe beauty of real wood and carry the grain pattern verticallyfrom tile to tile.2. The backside of each tile in the tile set is marked with a setnumber so that the tiles comprising that specific set do notget confused with any other natural veneer tile sets.3. The backside of each tile in the tile set with a letter denotingthe placement of each tile in the set. The tile marked A is thetop tile in the set, followed by B, C and so on.4. When specifying 3.4 tile sets, be sure to order the appropriatenumber of segment kits. Segment kits are not included in thesets and will need to be purchased separately. (See page 34for segment kits for frames and page 280 for mounting onReach storage units.)Terrace 3.4 — Natural Tile Sets Overview and Specials26"H NaturalVeneer Tile26"H NaturalVeneer TileGSA Reference PageSpecifying Terrace 3.4 Special Natural Veneer Tile SetsPricing for special natural veneer sets can be found using thepreviously described standard method. For specificationinformation see below.1. Determine the height of the natural veneer tile set (seeSpecifying Terrace 3.4 Standard Natural Veneer Tile Sets step#1 above) and the width.2. The model number for the set will beTTVS(set height)(set width)-XX. The first option fieldwill be used to show the special configuration of the tiles.• Natural veneer tile set must follow the same tileheight-location restrictions as other 3.4 tiles. Refer toWorking with Natural Veneer Tiles on page 28 for tileheight-location restrictions.Example:TTVS Terrace 3.4 tile veneer set6542 Tiles set height (which is 4" shorter than panelheight) and tile set width, 65"H x 42"W-XX Denotes a special tile configuration.3PQ Tile combination building from the ground up(optioned out) (see illustration below)3. Natural veneer tile sets are specified from the bottom upusing the following logic:PExamples:P13"HTileQ26"HTileT43"HBase TileExample: a 43"H base tile with three 13"H tiles above itwould be a T3P (see illustration above).4. Adjacent repeated sizes are replaced with a quantity and thenthe letter denoting the size.a. Example: a 43"H base tile with three 13"H tiles above itwould be a T3P (see illustration above).b. Example: a 13"H tile above and below a 26"H tile wouldbe PQP (see illustration above).5. Pricing for special tile sets can be determined by using theprice structure of the completely segmented standard set ofthe same height Terrace 3.4 tiles. (use 4P pricing for 52"H,5P for 65"H, 6P for 78"H, and 7P for 91"H)a. Example: a 78"H x 24"W special set incorporating a43"H base tile with three 13"H tiles above (T3P) would bepriced using the 6P tile set on page 81. Cost of the tile set:$1151.00.b. The example given in a. above would be specified asfollows: TTVS7824-XX.T3P.NC260.Note: For special stains, reference the Special Veneer Policy onpage 8.QPPPTile Set3PQPPPTTile SetT3PQPFabricTile SetPQP78 | Systems Supplement – 3/2013

TilesNatural Veneer Tile Sets• Specified when two or more natural veneertiles are adjacent to carry the grain patternfrom tile to tile.• Veneer tiles come with factory-installedattachment clips.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Tile set heights 26"-78" can be used to coverfull panels or can be subsets (used above orbelow non-veneer tiles as allowed by theTerrace 3.4 tile logic table on pricer pages26-28).• Order necessary segment kits separately.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).Terrace 3.4 — Natural Tile SetsGSA SIN 711-1For specification details refer to:Natural Sets Overview and Specials, page 78Working with Tiles, pages 24-28Overview of Tiles, page 29PPTERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.TTVS – .ShipList PriceDescription Model Weight Cubes 2PNatural Veneer Tile Sets — 26"H20"W TTVS2620– b D D5 S 0.724"W TTVS2624– b D D6 S 0.830"W TTVS2630– b D D6 S 1.236"W TTVS2636– b D D8 S 1.442"W TTVS2642– b D D8 S 1.648"W TTVS2648– b D D10 S 1.560"W TTVS2660– b D D12 S 2.0ShipList PriceDescription Model Weight Cubes 3P QP D D PQ D DNatural Veneer Tile Sets — 39"H20"W TTVS3920– b D D7.5 S 1.324"W TTVS3924– b D D9 S 1.230"W TTVS3930– b D D9 S 1.536"W TTVS3936– b D D12 S 1.842"W TTVS3942– b D D12 S 2.148"W TTVS3948– b D D15 S 2.460"W TTVS3960– b D D18 S 3.0NOTE: Refer to page 78 for special tile set specification information.1st Option:Tile Set:2P for 26"HQP or PQ for39"H2nd Option:Natural 1 VeneerType and Finish:See inside backcover for fabrics.NExample: TTVS2624-2P.NC260D D Discontinued 2/12/2012D Discontinued 8/29/2010S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 79DDDDDDDPPPDDDDDDDDDDDDDDPQD DD DD DD DD DD DD DDDDDDDDDDDDDDDQPTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesNatural Veneer Tile Sets• Specified when two or more natural veneertiles are adjacent to carry the grain patternfrom tile to tile.• Veneer tiles come with factory-installedattachment clips.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Sets shown with “basecover graphic” must beused at the base of the panel.How to specify —Select theTerrace 3.4Model Numberfrom above.TTVS – .ShipList PriceDescription Model Weight Cubes 5P Q3P D D QPQ D D TQ1st Option:Tile Set:Q2P for 52"HQ3P or QPQ for65"H2nd Option:Natural 1 VeneerType and Finish:See inside backcover for fabrics.NExample: TTVS6524-QPQ.NC260• Tile set heights 26"-78" can be used to coverfull panels or can be subsets (used above orbelow non-veneer tiles as allowed by theTerrace 3.4 tile logic table on pricer pages26-28). Sets with the T (43" base tile) must beused on full panels or as the base subset.• Order necessary segment kits separately.• 20"W tiles specified for Reach “E” panelframes.• Tiles do not include segment kits or tileattachment kits for mounting on Reach units(order separately — see page 280).Natural Veneer Tile Sets — 52"H20"W TTVS5220– b D D 20 S 3.324"W TTVS5224– b D D 24 S 4.030"W TTVS5230– b D D 18 S 2.436"W TTVS5236– b D D 24 S 3.242"W TTVS5242– b D D 26 S 3.648"W TTVS5248– b D D 32 S 4.460"W TTVS5260– b D D 38 S 5.2Natural Veneer Tile Sets — 65"H20"W TTVS6520– b D D 15 S 2.024"W TTVS6524– b D D 15 S 2.030"W TTVS6530– b D D 15 S 2.536"W TTVS6536– b D D 20 S 3.042"W TTVS6542– b D D 20 S 3.548"W TTVS6548– b D D 25 S 4.060"W TTVS6560– b D D 30 S 5.0NOTE: Refer to page 78 for special tile set specification information.Terrace 3.4 — Natural Tile SetsGSA SIN 711-1For specification details refer to:Natural Sets Overview and Specials, page 78Working with Tiles, pages 24-28Overview of Tiles, page 29ShipList PriceDescription Model Weight Cubes 4P Q2P D D 2QD D Discontinued 2/12/2012D Discontinued 8/29/2010S Shippable by small-package carrier.80 | Systems Supplement – 3/2013DDDDDDDPPPPPDDDDDDDDDDDDDDDDDDDDDPPPPPPPQDDDDDDDDDDDDDDDDDDDDDDDDDDDDPPQQPQDDDDDDDDDDDDDDQQQT

TilesNatural Veneer Tile Sets• Specified when two or more natural veneertiles are adjacent to carry the grain patternfrom tile to tile.• Veneer tiles come with factory-installedattachment clips.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Tile set heights 26"-78" can be used to coverfull panels or can be subsets (used above orbelow non-veneer tiles as allowed by theTerrace 3.4 tile logic table on pricer pages26-28).• Sets shown with “basecover graphic” must beused at the base of the panel.• Order necessary segment kits separately.Terrace 3.4 — Natural Tile SetsPPPPPPPPPPQGSA SIN 711-1For specification details refer to:Natural Sets Overview and Specials, page 78Working with Tiles, pages 24-28Overview of Tiles, page 29PQPQQQQTERRACEHow to specify —Select theTerrace 3.4Model Numberfrom above.TTVS – .ShipList PriceDescription Model Weight Cubes 6P D D Q4P D D QPQP 3QNatural Veneer Tile Sets — 78"H24"W TTVS7824– b D D 18 S 2.430"W TTVS7830– b D D 18 S 3.036"W TTVS7836– b D D 24 S 3.642"W TTVS7842– b D D 24 S 4.248"W TTVS7848– b D D 30 S 4.860"W TTVS7860– b D D 36 S 6.0ShipList PriceDescription Model Weight Cubes 7P Q5P D D QP2Q T2QNatural Veneer Tile Sets — 91"H24"W TTVS9124– b D D 21 S 2.830"W TTVS9130– b D D 21 S 3.536"W TTVS9136– b D D 28 S 4.242"W TTVS9142– b D D 28 S 4.948"W TTVS9148– b D D 35 S 5.660"W TTVS9160– b D D 42 S 7.0NOTE: Refer to page 78 for special tile set specification information.1st Option:Tile Set:6P or Q4P for78"HQ5P for 91"H2nd Option:Natural 1 VeneerType and Finish:See inside backcover for fabrics.NExample: TTVS7824-6P.NC215Systems Supplement – 3/2013 allsteeloffice.com | 81DDDDDDDDDDDDDDDDDDPPPPPPPDDDDDDDDDDDDDDDDDDDDDDDDPPPPPQDDDDDDDDDDDDD D Discontinued 2/12/2012D Discontinued 8/29/2010S Shippable by small-package carrier.QQPQDDDDDDDDDDDDQQTTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETerrace ®How to specify —Select theModel Numberfrom above.TCSRVK I TShipListDescription Model Weight Cubes PriceTerrace/Concensys Service Kit• Includes — TCSRVKIT D D7.0 S 0.6Concensys:Terrace:– 75-0118 Attachment kit – 50-3080 Frame connecting screws– 75-0119 Top cap clips – 75-5690 Tile clips– 50-0555 Storage unit screws – 75-5691 Bottom tile clips– 50-1051 Tinnerman screws – 13-2130 Top cap clip– 50-4540 Connector screws – 13-2100 Beltline tile mounting bracket– 50-2560 Wood screws – 13-2131 Center top cap clip– 50-1120 Worksurface insert screws – 72-6075 Glide tower assemblies– 50-0022 End trim screws – Touch-up paint kit– Nylon block – Terrace installation packet– Touch-up paint kit– Concensys installation packet– Gonzo cleaning sponge(To order additional Gonzo cleaning sponges, call Gonzo Corp. at 781-828-7779 ororder online at Gonzocorp.com.)Examples: TCSRVKITService KitOpen MarketD D Discontinued 2/12/2012S Shippable by small-package carrier.82 | Systems Supplement – 3/2013D D

NotesTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 83

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETerrace 2.6 Working with Terrace 2.6Terrace 2.6 offers a solution in theTerrace family with a slim 2.6-inchprofile. It’s so streamlined, efficient, andcompatible you’ll find a wide variety ofuses for it — on its own and incombination with Terrace freestandingand Terrace 3.4. This means you get moreworkspace in your office space, especiallyin large-scale office setups.Terrace 2.6 has efficient power and dataaccess and optimized capacity. Thebeltline and base pathway system putspower and data exactly where it’s needed.It more than satisfies the technologyneeds of most office spaces. For thosewith exceptional power and datarequirements, Terrace 3.4 can be used asa main spine wall in combination withTerrace 2.6 as wing panels, on- oroff-module, to define individualworkspace.Terrace 2.6 offers a variety of standardtile options, including Landscapesurfaces, to allow visual compatibilitywith Terrace 3.4. Terrace 2.6 also utilizesthe same worksurfaces and storageproducts as Terrace 3.4 to simplifyfacilities inventory management.2.6 Tiles provide visual continuity withTerrace 3.4.GSA Reference PageTerrace 2.6 can be ordered as a complete panelwith frame and monolithic tiles.Terrace 2.6 can be segmented by ordering framesand tiles separately. Tile options include portedbeltline tiles.Terrace 2.6 can act as wing panels for Terrace 3.4 ,allowing panels and components to be mountedoff-module for maximum flexibility.84 | Systems Supplement – 3/2013

Frames & ConnectorsTop caps are standardwith any base panelframe.Terrace 2.6 — Working with FramesLay-in top pathwayaccepts data cables.Panels (frames and tiles)are 2 5 ⁄8" thick (use 2 3 ⁄4" tocalculate inter sections inlength of panel run).Frames are black in color.GSA Reference PageTop caps are provided withstructural panel frames. Whenadding stacking frames,remove the top cap from thestructural frame, and installit on top of the uppermoststacking frame.TERRACEBeltline area accommodateselectrical power and providesdesktop access to data andcommu ni ca tion cables.Opening in the side ofuprights accommodatea large volume of datacabling and electrical.Lay-in base pathwayaccepts voice, data andfiber optic cable, as wellas electrical system.Leveling glides provide2 5 ⁄8" of adjustment andare accessible from theinterior of the frame.Construction and FeaturesSpecifications—formed, steel verticalmembers, with tubular steel horizontalmembers are welded into a strong,sturdy structural panel frame. Panelframes are shipped with top cap andbase pathway covers installed. Fullymonolithic panels include tiles andpanel frames with top cap and basepathway covers installed. Segmentedpanels are shipped with top cap andbaseway covers installed. Thesegmented tiles are ordered separatelywith choices of applications.Monolithic PanelsSegmented PanelsStacking frames areavailable in 13"H.Steel horizontal membershave vertical cable andelectrical routing capacity.Structural panel framesare available in 30", 43",56" and 69" nominalheights.Base pathway cover hasoutlet openings thataccept duplex receptaclesor commercially avai lablemodular data faceplates.Stacking connectionprovides a solidmetal-to-metal connection,allowing the stacking frame toaccept hang-on compo nents,per Allsteel configurationguidelines.TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 85

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFrames & ConnectorsFrame Dimensions (Actual)Depth: 2 5 ⁄8" (use 2 3 ⁄4" to calcu late intersections in length ofpanel run)Widths: 24", 30", 36", 42", 48", 60"Heights*: Flat Painted trim: 30 1 ⁄4", 43 1 ⁄4", 56 1 ⁄4", 69 1 ⁄4"Stacking Frames: 13"HLeveling Glides: 2 5 ⁄8" range*with levelers fully retractedBuilding vertically with Terrace framesStacking frames can108"Hbe added to the top ofa 30"H straight base95"Hpanel frame up to69"H69"H, added to43"H and 56"Hstraight base panelframes in anycombination, andadded to the top of69"H straightstructural panelframes. Do notcombine differing30"H 43"H 56"H 69"Hframe widths in a single stack. Stacking frames cannot be usedas base frames. Tile options for stacking frames are given onpage 93. Guidelines for using overhead storage with stackingframes are given on page 209.Terrace 2.6 — Working with FramesGSA Reference PageBuilding horizontally with Terrace framesImportant planning guide lines: For adequate stability,one of two methods of stabiliza tion must be adhered to:Two Return PanelsParent Run48" min./144" max.Two Return PanelsMethod 1—Opposingreturns: A parent run mustbe a mini mum of 48" anda maximum of 144"between return panels. Theparent run must have aminimum of two returnpanels running in opposingdirections on each end ofrun.Parent Run48" min./144" max.Two Return Panels60" Min. Combined LengthReturn Panels must havecombined length 60% of parent runMethod 2—Single-sidedreturns: A parent run mustbe a mini mum of 48" anda maxi mum of 144"between return panels. Theparent run must have amini mum of two returnpanels total ing at least60% of its length,extending in one direction.Return panels must not beany more than 26" shorterin height than parent run.When using 120°connections, 12" must beadded to length of returnpanels as determined bymethods 1 and 2. Any rununder 100" must have aminimum combined lengthof 72" of return panels.86 | Systems Supplement – 3/2013

Frames & ConnectorsBuilding horizontally with Terrace frames (continued)Intersecting connections“L” 90-Degree“X” 4-Way“C” 120° 3-Way“T” 3-Way“B” 120° 3-Way“L”, “T”, “X”, “B” and “C”connector kits are used whenconnecting frames atintersecting runs. For “L”,“T” and “X” connector kits,add 2 3 ⁄4" to the total length ofthe panel run for eachintersec tion, whether locatedin the middle or at the end ofthe run.Wall mount kits provide ameans to affix a panel run toa perma nent building wall.Kit adds 1 1 ⁄16" to length ofpanel run.Top ViewFrame2 3 ⁄4"Frame S FrameExtended straight connectorkit “S” can be used to keepcontinuous runs dimensionallyconsistent with opposing panelruns which incorporate “T” or“X” intersections. (Add 2 3 ⁄4"to the length of the run forevery extended straightconnector used.)In-line connectionsFrameDirect connections betweensame height frames in acontinuous run areaccomplished with providedhardware. There is noincremen tal increase indimension along the run.Optional Terrace 2.6Stiffener Supports on page99 can be used to increase thestiffness of interior on Terrace2.6 Panel when acoustical tilesare on both sides. Tool tilestiffeners also available — seepage 124.Example 3Connectors required:1— 13"H “B”1— 30"H “C”Terrace 2.6 — Working with FramesMultiple-height connectionsalso utilize standard “L”, “T”,“X”, “S” and “E” connec tors,with corresponding heightconnectors stacked accordingto the number of intersectingpanels from the bottom up.(See examples.)Example 1Connectors required:1—13"H “S”1— 43"H “T”43"H56"HIn variable height “T”connections — as shownabove — you would use theconnectors as indicated.Example 2Connectors required:1— 13"H “H”1— 13"H “L”56"H1— 13"H “T”1— 30"H “X”43"H30"H43"H69"H30"H43"HGSA Reference PageExample 4Connectors required:1— 13"H “H”1— 43"H “C”Note: Base connectors mustbe specified at base regardlessof full height or segmentedconnection. Specify height thatcorresponds with segmentframe height. Exception: whensegmenting base to 13"H files,use 17" base connector.69"H43"HTN326H43"H56"H43"HTN343LExample above represents 2.6variable height connection for69" to 43" painted optiononly.High-low “H” covers theexposed end of a framewhen joining frames ofdiffering height in certainconfigurations — 2.6 profileadds 3 ⁄8" to length of panelrun. At the end of a panel runuse End Trim Kit “E”.TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 87

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFrames & ConnectorsBuilding horizontally with Terrace frames (continued)Intersecting connections“L” 90-Degree“X” 4-Way“C” 120° 3-Way“T” 3-Way“B” 120° 3-Way“L”, “T”, “X”, “B” and “C”connector kits are used whenconnecting frames atintersecting runs. For “L”,“T” and “X” connector kits,add 3 1 ⁄2" for 3.4 or 2 3 ⁄4" for2.6 to the total length of thepanel run for each intersec -tion, whether located in themiddle or at the end of therun.Wall mount kits provide ameans to affix a panel run to aperma nent building wall. Kitadds 1 1 ⁄8" to length of panelrun.Radius trim on 2.6 frames canbe matched to 3.4 frames thathave either flat painted trim orradius trim.Top Views3.42.6 T 2.62.63.4 T 3.42.63.4 S 3.4Extended straight connectorkit “S” is used to fill the gapwhen 3.4 spine wall is tallerthan 2.6 wing panels. Seeexample 1.Terrace 2.6, 3.4, Transitional — Working with Frames3 1 ⁄2"2 3 ⁄4"Multiple-height connectionsalso utilize standard “L”, “T”,“X”, “S” and “E” connec tors,with corresponding heightconnectors stacked accordingto the number of intersectingpanels from the bottom up.(See examples.)Example 1Connectorsrequired:1–13"H “S”1-43"H “T”43"H56"HTN313STTN343TTNIn variable height “T”connections — as shownabove — you would use theconnectors as indicated.Example 22.6 – 69" and 43"H3.4 – 56" and 30"H69"H43"H56"HExample 2a3.4 –69" and 43"H2.6 – 56" and 30"H69"H56"H43"HTN330XTTN330XTTN313HTN313LTTN313TNN30"HTT313E –for Flat TrimTN313HT –for Radius Trim30"HTN313LTTN313TTNExample 3GSA Reference Page69"H69"HTN326H43"HTN343LTTT326E – for Flat TrimTN326HT – for Radius Trim43"HTN343LTExample above representsradius variable heightconnection for 69" to 43"with full-height configurationusing the connectors asindicated.88 | Systems Supplement – 3/2013

NotesTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 89

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFrames & ConnectorsMonolithic Panels30"H Panel 43"H Panel 56"H Panel 69"H PanelMonolithic Panels30"H43"H56"H69"H24"W 30"W 36"W 42"W 48"W 60"WConnector Kits — 2.6 profile“L” 90° Connector Kit“T” 3-way Connector Kit“X” 4-way Connector Kit“B” 2-way 120° Connector Kit“C” 3-way 120° Connector Kit“S” Extended Straight Connector Kit“M” Off-module Connector Kit (2.6 to 3.4 only)“W” Wall Mount Kit“E” End Trim Kit“L” “T” “B” “C”“X” “S” “M” “W” “E”Terrace 2.6 — Overview of FramesGSA Reference PageTrim Profile (Top Cap shown)Radius PaintedConnector Kits — Transitional“LT” 90° Connector Kit“TNN” 3-way Connector Kit (3.4 to 2.6 to 2.6)“TTN” 3-way Connector Kit (3.4 to 3.4 to 2.6)“X” 4-way Connector Kit“ST” Extended Straight Connector Kit“LT”(3.4 to 2.6)“TNN”(3.4 to 2.6to 2.6)“TTN”(3.4 to 3.4to 2.6)“X”(3.4 to 2.6)“ST”(3.4 to 2.6)90 | Systems Supplement – 3/2013

Frames & ConnectorsStructural Panel FramesTerrace 2.6 — Overview of FramesGSA Reference PageTERRACE30"H Frame 43"H Frame 56"H Frame 69"H Frame 82"H Door Sliding DoorRadius Painted Radius Veneer24"W30"W 36"W 42"W 48"W 60"W30"H43"H56"H69"HStacking Frames13"H Stacking24"W 30"W 36"W 42"W 48"W 60"W13"HTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 91

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesTerrace tiles come in a variety ofstyles. Select the aesthetic* andfunctional combination thatmeets your specific requirements.Additional tiles available,but not shown below, includeMonolithic, Monolithic Port andCustom.Radius painted orradius veneer trim69"H frame shown.Tile design providesa 3 ⁄8" reveal segmentkit at the bottomedge of beltline tilesand above.Fabric tackable acoustical tiles areavailable in hundreds of fabrics andcolors.Landscape surface tiles allow you to choosefrom a range of innovative materials including:tech metals, translucent, and patternedtranslucent.Glass tile “kits” provide access to naturallight, and connect office workers visually.Available in double-pane.Marker board tiles are excel lent forconference areas and offices whereinformal meetings are heldfrequently.Data/electrical port tiles permitreceptacles to be readily available atworksurface height.Veneer tiles are available in Cleargrain,Natural 1, and Natural sets to providethe warmth of wood.Terrace 2.6 — Working with TilesGSA Reference Page*Aesthetics of opposing tile surface and/or frame interior should be considered when selecting perforated or light colored sheermaterials.92 | Systems Supplement – 3/2013

TilesTile Position Options ChartTerrace 2.6 Base FramesStackingFramesTerrace 2.6 — Working with Tiles13" High 13" High 26" High 30" HighNominal Acoustical, Electrical 13" High Acoustical, 26" High Acoustical,Frame Tile Tile Specialty or and Data Double-Pane Specialty or Double-Pane Specialty or MonolithicHeight Position Height COM Tile Port Tile Glazed Tile COM Tile Glass Tile COM Tile Tile30" AB 30" No No No No No • •43" AB 30" No No No No No • •C 13" • • • No No No NoABC 43" No No No No No No •56" AB 30" No No No No No • •C 13" • • • No No No NoD 13" • • • No No No NoCD 26" No No No • • No NoABC 43" No No No No No No •ABCD 56" No No No No No No •69" AB 30" No No No No No • •C 13" • • • No No No NoD 13" • • • No No No NoE 13" • No • No No No NoCD 26" No No No • • No NoDE 26" No No No • • No NoABC 43" No No No No No No •ABCD 56" No No No No No No •ABCDE 69" No No No No No No •13" G 13" • No • No No No NoH 13" • No • No No No No2 – 13" GH 26" No No No • No No No• 30" tiles must only be used in the “AB” location and cannot be used in anyother location (i.e., “BC”, “CD”, “DE”, etc.).• A monolithic tile cannot be used in any location above the “AB” location thatdoes not include the “AB” location (i.e., “BCD”, “CDE”, etc.).• Glass tile cannot be mounted in wall track.Tile heights and locationsLetters on tiles represent position of tiles on frames referenced in chart above.MONOLITHIC STYLEAB30"HSTACKINGG13"HABC43"HABCDABCDESEGMENTED STYLEAB56"H 69"H 30"H• 13"H Stacking frames can be added to anyframe.• 26"H Tiles can span between two stackersor base frame and stacker.• 30"H, 56"H and 69"H frames can have upto 3 – 13"H stackers added.• 43"H frames can have up to 4 – 13"H stackersadded.GEDCAB82"HCABEGCDAB82"HDCABGECDAB82"HCDAB43"H 56"H 56"HGDEDAB82"HDABC56"HEGDCAB82"HEDCAB69"HGEDABC82"HDECAB69"HGDEABC82"HNOTE: 82"H and taller panels are created by adding 13"H stacking frames.ECDAB69"HGEABCD82"HGSA Reference PageTERRACE 2.6 FRAMESWITHOUT TILES13"H30"HDEABC69"HEGABCD82"H43"H 56"H 69"HEDABC69"HHGEABCD95"HEABCD69"HGHEABCD95"HTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 93

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesNatural Veneer Tile Set Position Options ChartNatural Veneer Tile SetsNominal Frame Tile Position Natural Veneer Tile Set Tiles IncludedHeight (refer to page 93) Tile Height (bottom to top)43"H ABC SP 39"H SP56"H CD 2P 26"H PPABC SP 39"H SPABCD S2P 52"H SPPABCD SQ 52"H SQ69"H DE 2P 26"H PPABC SP 39"H SPABC T 39"H TCDE 3P 39"H PPPCDE PQ 39"H PQABCDE S3P 65"H SPPPABCDE TQ 65"H TQABCDE SPQ 65"H SPQ82"H CD 2P 26"H PPABC SP 39"H SPCDEG 4P 52"H PPPPCDEG 2Q 52"H QQABCDEG S4P 78"H SPPPPABCDEG S2Q 78"H S2Q95"H** CD 2P 26"H PPTerrace 2.6 Natural Veneer Tile SetsLetters on tiles representheight of individual tiles,see codes above.Ordering code is listedabove each tile set, andtotal height of set islisted below.Sets with basecovergraphic must be base tilesets.ABC SP 39"H SPABCD S2P 52"H SPPABCD SQ 52"H SQCDEG 4P 52"H PPPPDEGH 2Q 52"H QQCDEGH 5P 65"H PPPPPCDEGH P2Q 65"H PQQABCDEFG S5P 91"H SPPPPPABCDEFG SP2Q 91"H SPQQABCDEFG T2Q 91"H TQQ2PPP26"HSPPS39"H3PPPP39"HS2PPPS52"HPQQP39"HSQQS52"H4PPPPP52"HS3PPPPS65"H2QQQ52"HTQQT65"HSPQQPS65"H5PPPPPP65"HS4PPPPPS78"H*Terrace 2.6 — Working with Tiles2.6 Tile Height Codes UsedFor Natural Veneer SetsBelow:P13"HTileQ26"HTileS30"HBase TileGSA Reference PageT43"HBase Tile• 30" S tiles must only be used in the “AB”location and cannot be used in any other location(i.e., “BC”, “CD”, “DE”, etc.).• 43" T tiles must only be used in the “ABC”location and cannot be used in any other location(i.e., “CDE”, “DEG”, etc.).• More combinations are possible than thoseshown.• Refer to page 136 for special tile set specificationand ordering details.**95"H frames are created by combining baseframe and stack-on frame(s).6PPPPPPP78"H*S2QQQS78"H**Requires stacking frame.S5PPPPPPS91"H*SP2QQQPS91"H*T2QQQT91"H*94 | Systems Supplement – 3/2013

TilesFABRIC LANDSCAPE WOODTerrace 2.6 — Overview of TilesGSA Reference PageTERRACETackableAcousticalExtensionsTool TileSteelHard Surface and other LandscapeSurfaces (see specific pages)Natural VeneerData/ElectricalPortTiles — Tackable Acoustical, Hard Surface, Steel, Steel Mesh, Mulberry Paper, Nomadic Aluminum, LUMAsite,Pearlescent Strata, Frequency, Foundation, Infinite Spectrum and Veneer Tiles26"H30"HMarker BoardNOTE: Dark black line that appears at base of tiles indicates the“color specified” segment kit that comes with tile.Steel MeshData/Electrical Port (port tiles available as acoustical only)Monolithic Tiles — Tackable Acoustical and Port (Veneer 30"H and 43"H)30"HMarkerboard and Glass Tile Kits26"HDoublePane GlassCleargrain VeneerTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 95

PanelsTerrace 2.6 — Monolithic PanelsFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACE• Panel frame includes frame, top cap, basepathway covers and attaching hardware.• Monolithic tiles are tackable and acoustical.• Frames and tiles will be packaged separatelyto allow bulk packaging and reduceinstallation time.How to specify —Select theTerrace 2.6Model Numberfrom above.Nominal Ship List PriceHeight Width Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 630"H Panels30" 24" TN03024MM D 11 S 2.1730" 30" TN03030MM D 13 S 2.6730" 36" TN03036MM D 15 3.1630" 42" TN03042MM D 19 3.6530" 48" TN03048MM D 21 4.1430" 60" TN03060MM D 27 5.1343"H Panels43" 24" TN04324MM D 15 S 3.0743" 30" TN04330MM D 20 S 3.7743" 36" TN04336MM D 25 4.4643" 42" TN04342MM D 27 5.1643" 48" TN04348MM D 32 5.8543" 60" TN04360MM D 40 7.2456"H Panels56" 24" TN05624MM D 21 S 3.9756" 30" TN05630MM D 26 4.8756" 36" TN05636MM D 32 5.6756" 42" TN05642MM D 38 6.6656" 48" TN05648MM D 41 7.5656" 60" TN05660MM D 53 9.3669"H Panels69" 24" TN06924MM D 26 4.8769" 30" TN06930MM D 33 5.9769" 36" TN06936MM D 39 7.0769" 42" TN06942MM D 46 8.1769" 48" TN06948MM D 53 9.2769" 60" TN06960MM D 66 11.471st Option:Fabric:See inside backcover for fabrics.TN0 MM. .2nd Option:Paint:See inside frontcover for finishes.For Select Paints —add $32.PExample: TN04330MM.CS928.P4JFor specification details refer to:Working with Frames, pages 85-88D Discontinued 8/29/2010S Shippable by small-package carrier.96 | Systems Supplement – 3/2013DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

PanelsTerrace 2.6 — Monolithic Panels w/Veneer Top Cap• Veneer Radius Top Caps available inCleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Panel frame includes frame, top cap, basepathway covers and attaching hardware.For specification details refer to:Working with Frames, pages 85-88TERRACESelect theTerrace 2.6Model Numberfrom above.Nominal Ship List PriceHeight Width Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 630"H Panels w/Veneer Top Cap30" 24" TC03024M30" 30" TC03030M30" 36" TC03036M30" 42" TC03042M30" 48" TC03048M30" 60" TC03060M43"H Panels w/Veneer Top Cap43" 24" TC04324M43" 30" TC04330M43" 36" TC04336M43" 42" TC04342M43" 48" TC04348M43" 60" TC04360M56"H Panels w/Veneer Top Cap56" 24" TC05624M56" 30" TC05630M56" 36" TC05636M56" 42" TC05642M56" 48" TC05648M56" 60" TC05660M69"H Panels w/Veneer Top Cap69" 24" TC06924M69" 30" TC06930M69" 36" TC06936M69" 42" TC06942M69" 48" TC06948M69" 60" TC06960M D1st Option:Fabric:See inside backcover for fabrics.TC0 M. .P .DDDDDDDDDDDDDDDDDDDDDDD2nd Option:Paint:See inside frontcover for finishes.For Select Paints —add $32.3rd Option:Veneer Typeand Finish:See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1Monolithic Panels w/Veneer Top Caps canbe created by ordering frames with veneertop caps on page 98 and monolithic tileson page 118.How to specify — D Discontinued 12/30/2007Example: TC04330M.CS928.P02.CC511Systems Supplement – 3/2013 allsteeloffice.com | 97TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFrames• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 2.6Model Numberfrom above.TN Painted Top CapTC Veneer Top Cap30"H Base Panel FramesTerrace 2.6 — 30"H, 43"H, 56"H and 69"H Base Panel FramesPainted Top CapVeneer Top CapShip Core Paint Select Core Paint SelectDescription Model Weight Cubes List Price List Price List Price List Price24"W T b 03024 7 S 3.2 $ 311 $ 358 $ 430 $ 47730"W T b 03030 9 3.9 $ 335 $ 382 $ 453 $ 50036"W T b 03036 11 4.6 $ 347 $ 394 $ 466 $ 51342"W T b 03042 13 5.3 $ 367 $ 414 $ 485 $ 53248"W T b 03048 15 6.0 $ 389 $ 436 $ 508 $ 55560"W T b 03060 19 7.5 $ 416 $ 463 $ 535 $ 58243"H Base Panel Frames24"W T b 04324 11 S 3.2 $ 302 $ 349 $ 420 $ 46730"W T b 04330 14 3.9 $ 323 $ 370 $ 442 $ 48936"W T b 04336 17 4.6 $ 333 $ 380 $ 451 $ 49842"W T b 04342 19 5.3 $ 354 $ 401 $ 473 $ 52048"W T b 04348 22 6.0 $ 376 $ 423 $ 493 $ 54060"W T b 04360 28 7.5 $ 401 $ 448 $ 520 $ 56756"H Base Panel Frames24"W T b 05624 15 4.1 $ 346 $ 393 $ 464 $ 51130"W T b 05630 18 5.0 $ 360 $ 407 $ 479 $ 52636"W T b 05636 22 5.9 $ 387 $ 434 $ 503 $ 55042"W T b 05642 26 6.9 $ 396 $ 443 $ 513 $ 56048"W T b 05648 29 7.8 $ 418 $ 465 $ 536 $ 58360"W T b 05660 37 9.6 $ 421 $ 468 $ 540 $ 58769"H Base Panel FramesT 0 . P .24"W T b 06924 18 5.0 $ 360 $ 407 $ 479 $ 52630"W T b 06930 23 6.1 $ 390 $ 437 $ 509 $ 55636"W T b 06936 27 7.3 $ 392 $ 439 $ 511 $ 55842"W T b 06942 32 8.4 $ 404 $ 451 $ 523 $ 57048"W T b 06948 37 9.5 $ 442 $ 489 $ 559 $ 60660"W T b 06960 46 11.7 $ 445 $ 492 $ 564 $ 6111st Option:Paint:See inside frontcover for finishes.Examples: TN04324.P02Panel Frames• Includes frame, top cap, base pathway covers,and attaching hardware.2nd Option:Veneer Typeand Finish(if applicable):See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1TC06924.P02.NC511For specification details refer to:Working with Frames, pages 85-88N Radius PaintedShippable by small-package carrier.98 | Systems Supplement – 3/2013S2 Top Cap OptionsGSA SIN 711-1C Radius Veneer

FramesDoor Panel Frame• Includes frame, 36"W door, hinges andattaching hardware.• Matching veneer door includedwith veneer trim option.• Veneer Radius Top Caps available inCleargrain or Natural 1 veneer.• See page 16 for Stratawood and NaturalVeneer information.35 3 ⁄4"77 5 ⁄8"How to specify —Select theTerrace 2.6Model Numberfrom above.T .Terrace 2.6 — Door Panel / 13"H Stacking FramesTerrace 2.6 Horizontal Stiffener Supports• Optional support used to increase the stiffnessof interior on Terrace 2.6 panels.• Can only be used with acoustical tiles on bothsides. Stiffeners supports also available fortool tiles — see page 124.• Includes attaching hardware.• Black only.Stacking Frames• Includes attaching hardware.• Black only.• Uses top cap from base panel.Painted V1 V3Ship Core Paint Select Core Paint Select Core Paint SelectDescription Model Weight Cubes List Price List Price List Price List Price List Price List PriceDoor Panel — Laminate82"H x 42"W TN18242D 158 8.4 $2578 $2625 N/A N/A N/A N/AShipListDescription Model Weight Cubes PriceLockset (Door Knob)polished brass, keyed on one side 899900 2 1.0 $ 961st Option:Paint(if applicable):See inside frontcover for finishes.P .2nd Option:Veneer TrimType and Finish(if applicable):See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 13rd Option:Door Laminate(if applicable):See inside frontcover for finishes.Examples: TN01324 TC1824D.P27.NE800 TN224SSFor specification details refer to:Working with Frames, pages 85-88N Radius PaintedShippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 99S2 Top Cap OptionsGSA SIN 711-1C Radius VeneerDoor Panel — Veneer82"H x 42"W TC18242D 158 8.4 N/A N/A $3660 $3707 $3994 $4041Door Leverbrushed aluminum, keyed on one side 899910 2 1.0 $ 272Terrace 2.6 Horizontal Stiffener Support (for use with acoustical tiles on both sides)24"W TN224SS 4 S 0.4 $ 4330"W TN230SS 4 S 0.4 $ 4636"W TN236SS 4 S 0.4 $ 5142"W TN242SS 4 S 0.5 $ 6448"W TN248SS 4 S 0.6 $ 6960"W TN260SS 4 S 0.7 $ 7613" H Stacking Frames24"W TN01324 8 S 1.1 $ 24730"W TN01330 10 S 1.4 $ 25936"W TN01336 12 S 1.6 $ 26742"W TN01342 14 S 1.9 $ 27848"W TN01348 16 S 2.1 $ 28160"W TN01360 20 S 2.6 $ 291TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FramesTerrace 2.6 — Sliding DoorSliding Door• One specific door model for both Terrace 3.4and 2.6. Terrace 3.4 trim on page 33.• Sliding doors available in 69"H and 82"Hand can mount to 30", 36", 42", and 48"Wpanels of same height.• Doors are 42"W to accommodate a 36"Wopening.• Order system specific Mounting Kit for eachdoor ordered.• Threshold free design for best aesthetics andsafety-eliminates potential for tripping.• Sliding door ships non-handed. Handles arefield installed to L or R hand.• Handle pulls on each side of door are colormatched to trim.• Available in Core and Select paint.• Doors are available in Frosted Translucentinsert material only.GSA SIN 711-1For specification details refer to:Working with Sliding Door Panels, page 100Mounting Kits• Mounting kits are specific to each system.• Terrace bracket kits are trim specific.• Order to match the width of the panel the kitis hanging off of.• Available in Core and Select paint.TERRACESliding DoorBracket KitHow to specify —Select theTerraceModel Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List PriceTerrace Sliding Door for 36"W opening69"H x 42"W TT16942SD 38 7.7 $2858 $291482"H x 42"W TT18242SD 46 9.3 $3480 $3536Terrace Mounting Bracket — for 2.630"W TNDMK30 4 S 0.4 $ 365 $ 37936"W TNDMK36 5 S 0.5 $ 365 $ 37942"W TNDMK42 6 S 0.5 $ 365 $ 37948"W TNDMK48 7 S 0.6 $ 365 $ 379.1st Option:Paint:See inside frontcover for finishes.P .2nd Option:Insert(Door only):FTFTFrostedTranslucentExamples: TT16942SD.PR3.FT TNDMK30.PR3 S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 101TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Painted Top Cap / Painted TrimGSA SIN 711-1“L” and “T” Connector Kits• Includes top cap, connectors, vertical cover,light gap extrusion and attaching hardware.• Connector adds 2 3 ⁄4" to run.“X” Connector Kits• Includes top cap and connectors.• Connector adds 2 3 ⁄4" to run.How to specify —Select theTerrace 2.6Model Numberfrom above.TN3 . PShipSelectDescription Model Weight Cubes List Price List Price“L” 90° Connector Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TN313L 2 S 0.1 $ 88 $ 11026"H stacking/segmented TN326L 3 S 0.3 $ 121 $ 14339"H stacking/segmenting TN339L 4 S 0.4 $ 147 $ 16930"H base panel TN330L 3 S 0.3 $ 130 $ 15243"H base panel TN343L 4 S 0.4 $ 152 $ 17456"H base panel TN356L 5 S 0.5 $ 161 $ 18369"H base panel TN369L 6 S 0.7 $ 183 $ 205“T” 3-way Connector Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TN313T 2 S 0.1 $ 88 $ 11026"H stacking/segmented TN326T 3 S 0.3 $ 121 $ 14339"H stacking/segmented TN339T 4 S 0.4 $ 147 $ 16930"H base panel TN330T 3 S 0.3 $ 130 $ 15243"H base panel TN343T 4 S 0.4 $ 152 $ 17456"H base panel TN356T 5 S 0.5 $ 161 $ 18369"H base panel TN369T 6 S 0.7 $ 183 $ 205“X” 4-way Connector Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TN313X 1 S 0.1 $ 88 $ 10030"H base panel TN330X 2 S 0.3 $ 130 $ 14243"H base panel TN343X 3 S 0.4 $ 152 $ 16456"H base panel TN356X 4 S 0.5 $ 161 $ 17369"H base panel TN369X 4 S 0.7 $ 183 $ 1951st Option:Paint:See inside frontcover for finishes.Example: TN313L.P02Shippable by small-package carrier.102 | Systems Supplement – 3/2013S

Connectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Painted Top Cap / Painted TrimGSA SIN 711-12-Way 120° Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware.3-Way 120° Connector Kits• Includes top cap and connectors.TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.TN3 . PShipSelectDescription Model Weight Cubes List Price List Price2-Way 120° Connector — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TN313B 2 S 0.1 $ 88 $ 11026"H stacking/segmented TN326B 3 S 0.3 $ 121 $ 14339"H stacking/segmented TN339B 4 S 0.4 $ 147 $ 16930"H base panel TN330B 3 S 0.3 $ 130 $ 15243"H base panel TN343B 4 S 0.4 $ 152 $ 17456"H base panel TN356B 5 S 0.5 $ 161 $ 18369"H base panel TN369B 6 S 0.7 $ 183 $ 2053-Way 120 Degree Connector — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TN313C 2 S 0.1 $ 88 $ 11026"H stacking/segmented TN326C 3 S 0.3 $ 121 $ 14339"H stacking/segmented TN339C 4 S 0.4 $ 147 $ 16930"H base panel TN330C 3 S 0.3 $ 130 $ 15243"H base panel TN343C 4 S 0.4 $ 152 $ 17456"H base panel TN356C 5 S 0.5 $ 161 $ 18369"H base panel TN369C 6 S 0.7 $ 183 $ 2051st Option:Paint:See inside frontcover for finishes.Example: TN313B.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 103STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Painted Top Cap / Painted Trim“S” Connector KitsHigh-Low End Trim KitsGSA SIN 711-1• Includes top cap, connectors, vertical cover, • End vertical cover (includes top cap).light gap extrusion and attaching hardware.• Connector adds 2 3 ⁄4" to run.“E” End Trim Kits• End vertical trim cover (includes top captrim — adds 3 ⁄8" to run).How to specify —Select theTerrace 2.6Model Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List Price“S” Extended Straight Connector Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TN313S 2 S 0.1 $ 102 $ 12426"H stacking/segmented TN326S 3 S 0.3 $ 130 $ 15239"H stacking/segmented TN339S 4 S 0.4 $ 160 $ 18230"H base panel TN330S 3 S 0.3 $ 150 $ 17243"H base panel TN343S 4 S 0.4 $ 171 $ 19356"H base panel TN356S 6 S 0.5 $ 182 $ 20469"H base panel TN369S 7 S 0.7 $ 196 $ 218“E” End Trim Kits — Radius Painted Top Cap and Painted Trim13"H stacking/segmented TN313E 1 S 0.1 $ 63 $ 8526"H stacking/segmented TN326E 2 S 0.3 $ 69 $ 9139"H stacking/segmented TN339E 2 S 0.4 $ 77 $ 9930"H base panel TN330E 2 S 0.3 $ 73 $ 9543"H base panel TN343E 2 S 0.4 $ 80 $ 10256"H base panel TN356E 3 S 0.5 $ 93 $ 11569"H base panel TN369E 4 S 0.7 $ 117 $ 139High-Low End Trim KitTN3 . P13"H TN313H 1 S 0.1 $ 88 $ 10026"H TN326H 2 S 0.4 $ 130 $ 14239"H TN339H 2 S 0.3 $ 147 $ 1591st Option:Paint:See inside frontcover for finishes.Example: TN313S.P02Shippable by small-package carrier.104 | Systems Supplement – 3/2013S

Connectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Painted Top Cap / Painted Trim“W” Wall Mount KitsGSA SIN 711-1• Top cap. (Color must be specified.)• Connector (black only — adds 1 1 ⁄16" to run).• Available only in 69" length. Cut in field forother lengths.TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List Price“W” Wall Mount KitTN3 . P69"H base panel TN369W 5.2 S 0.7 $ 183 $ 2051st Option:Paint:See inside frontcover for finishes.Example: TN369W.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 105STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 2.6 — Connector Kits 3.4 to 2.6Painted Top Cap / Painted Trim“L” and “T” Connector Kits• Includes top cap, connectors, vertical coverand attaching hardware for 3.4 Radius andFlat Trim options.• 2.6 connector adds 2 3 ⁄4" to run; 3.4 connectoradds 3 1 ⁄2" to run.• “T” connectors available in both3.4 to 2.6 to 2.6 connections and3.4 to 3.4 to 2.6 connections.How to specify —Select theTerraceModel Numberfrom above.TN3 . PShipSelectDescription Model Weight Cubes List Price List Price“L” 90° Connector Kits — 3.4 to 2.613"H stacking/segmented TN313LT D2 S 0.126"H stacking/segmented TN326LT D3 S 0.339"H stacking/segmenting TN339LT D5 S 0.430"H base panel TN330LT D4 S 0.343"H base panel TN343LT D5 S 0.456"H base panel TN356LT D6 S 0.569"H base panel TN369LT D7 S 0.7“T” 3-way Connector Kits — 3.4 to 2.6 to 2.613"H stacking/segmented TN313TNN D2 S 0.126"H stacking/segmented TN326TNN D3 S 0.339"H stacking/segmented TN339TNN D4 S 0.430"H base panel TN330TNN D3 S 0.343"H base panel TN343TNN D4 S 0.456"H base panel TN356TNN D5 S 0.569"H base panel TN369TNN D6 S 0.7“T” 3-way Connector Kits — 3.4 to 3.4 to 2.613"H stacking/segmented TN313TTN D2 S 0.126"H stacking/segmented TN326TTN D3 S 0.339"H stacking/segmented TN339TTN D4 S 0.430"H base panel TN330TTN D4 S 0.343"H base panel TN343TTN D5 S 0.456"H base panel TN356TTN D6 S 0.569"H base panel TN369TTN D6 S 0.7“S” Straight Connector Kits — 3.4 to 2.6 (fills 2 3 ⁄4" wide gap)13"H stacking/segmented TN313ST D2 S 0.126"H stacking/segmented TN326ST D3 S 0.339"H stacking/segmented TN339ST D4 S 0.41st Option:Paint:See inside frontcover for finishes.Example: TN313LT.P02Top Views of Transitional Connections3.42.6 T 2.6T – 3.4 to 2.6 to 2.6T – 3.4 to 3.4 to 2.6D Discontinued 8/29/2010S Shippable by small-package carrier.106 | Systems Supplement – 3/20132.63.4 T 3.42.63.4 S 3.4S – 3.4 to 2.6DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

Connectors Terrace 2.6 — Connector Kits 3.4 to 2.6Painted Top Cap / Painted Trim“X” Connector Kits• Includes top cap and connectors.• Connector adds 2 3 ⁄4" or 3 1 ⁄2" to run.TERRACEHigh-Low End Trim Kits• End vertical cover (includes top cap).How to specify —Select theTerraceModel Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List Price“X” 4-way Connector Kits — 3.4 to 2.613"H stacking/segmented TN313XT D2 S 0.130"H base panel TN330XT D3 S 0.343"H base panel TN343XT D4 S 0.456"H base panel TN356XT D4 S 0.569"H base panel TN369XT D5 S 0.7High-Low End Trim Kit for 3.4 to 2.6 (Radius only)13"H TN313HT D1 S 0.126"H TN326HT D2 S 0.339"H TN339HT D2 S 0.4NOTE: If using Terrace 3.4 Flat trim order 3.4 to 2.6 “L” 90° Connector Kit (see page 106 Example 3) and standard3.4 Flat end trim.TN3 T . P1st Option:Paint:See inside frontcover for finishes.Example: TN313XT.P02D Discontinued 8/29/2010S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 107DDDDDDDDDDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Veneer Top Cap / Painted TrimGSA SIN 711-1• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 2.6Model Numberfrom above.VeneerShip Core Paint SelectDescription Model Weight Cubes List Price List Price“L” 90° Connector Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313LP 2 S 0.2 $ 239 $ 26126"H stacking/segmented TC326LP 3 S 0.4 $ 281 $ 30339"H stacking/segmenting TC339LP 4 S 0.5 $ 317 $ 33930"H base panel TC330LP 4 S 0.5 $ 297 $ 31943"H base panel TC343LP 4 S 0.5 $ 328 $ 35056"H base panel TC356LP 5 S 0.6 $ 376 $ 39869"H base panel TC369LP 6 S 0.8 $ 394 $ 416“T” 3-way Connector Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313TP 2 S 0.2 $ 239 $ 26126"H stacking/segmented TC326TP 3 S 0.4 $ 281 $ 30339"H stacking/segmented TC339TP 4 S 0.5 $ 317 $ 33930"H base panel TC330TP 3 S 0.5 $ 297 $ 31943"H base panel TC343TP 4 S 0.5 $ 328 $ 35056"H base panel TC356TP 5 S 0.6 $ 376 $ 39869"H base panel TC369TP 6 S 0.8 $ 394 $ 416“X” 4-way Connector Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313XP 2 S 0.2 $ 196 N/A30"H base panel TC330XP 2 S 0.2 $ 242 N/A43"H base panel TC343XP 2 S 0.2 $ 259 N/A56"H base panel TC356XP 3 S 0.2 $ 288 N/A69"H base panel TC369XP 3 S 0.2 $ 303 N/AHigh-Low End Trim Kit — Radius Veneer Top Cap and Painted Trim13"H TC313HP 1 S 0.1 $ 196 $ 20826"H TC326HP 2 S 0.4 $ 226 $ 23839"H TC339HP 2 S 0.3 $ 254 $ 2661st Option:Paint:See inside frontcover for finishes.TC3 P . P .Example: TC313LP.P27.NE800“L” and “T” Connector Kits• Includes veneer top cap, connectors, paintedvertical cover, light gap extrusion andattaching hardware.• Connector adds 2 3 ⁄4" to run.“X” Connector Kits• Includes veneer top cap and connectors.• Connector adds 2 3 ⁄4" to run.2nd Option:Veneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1For specification details refer to:Working with Frames, pages 85-88High-Low End Trim Kits• End painted vertical cover (includes veneertop cap).Note: Paint specificationnot required for “X”4-way connector andHigh-Low End Trim Kits.Shippable by small-package carrier.108 | Systems Supplement – 3/2013S

Connectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Veneer Top Cap / Painted Trim• Veneer Radius Top Caps available in 2-Way 120° Connector KitsGSA SIN 711-1Stratawood or Natural 1 veneer.For specification details refer to:• Includes veneer top cap, connectors, painted• Stratawood veneer has a consistentWorking with Frames, pages 85-88vertical cover, light gap extrusion andstraight-grain pattern.attaching hardware.• Natural veneer will have cathedrals and as anatural material is subject to nature’s quality“E” End Trim Kitscontrol with variations in grain pattern and • End painted vertical trim cover (includestone.veneer top cap trim — adds 3 ⁄8" to run).“S” Connector Kits• Includes top cap, connectors, painted verticalcover, light gap extrusion and attachinghardware.• Connector adds 2 3 ⁄4" to run.How to specify —Select theTerrace 2.6Model Numberfrom above.“S” Extended Straight Connector Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313SP 2 S 0.1 $ 278 $ 30026"H stacking/segmented TC326SP 3 S 0.3 $ 314 $ 33639"H stacking/segmented TC339SP 4 S 0.4 $ 353 $ 37530"H base panel TC330SP 3 S 0.3 $ 352 $ 37443"H base panel TC343SP 4 S 0.4 $ 387 $ 40956"H base panel TC356SP 6 S 0.5 $ 433 $ 45569"H base panel TC369SP 7 S 0.7 $ 447 $ 4692-Way 120° Connector — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313BP 2 S 0.2 $ 182 $ 20426"H stacking/segmented TC326BP 3 S 0.4 $ 215 $ 23739"H stacking/segmented TC339BP 4 S 0.5 $ 242 $ 26430"H base panel TC330BP 4 S 0.5 $ 245 $ 26743"H base panel TC343BP 4 S 0.5 $ 246 $ 27856"H base panel TC356BP 5 S 0.6 $ 272 $ 29469"H base panel TC369BP 6 S 0.8 $ 280 $ 302“E” End Trim Kits — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313EP 1 S 0.1 $ 193 $ 21526"H stacking/segmented TC326EP 2 S 0.3 $ 214 $ 23639"H stacking/segmented TC339EP 2 S 0.4 $ 237 $ 25930"H base panel TC330EP 2 S 0.3 $ 236 $ 25843"H base panel TC343EP 2 S 0.4 $ 244 $ 26656"H base panel TC356EP 3 S 0.5 $ 273 $ 29569"H base panel TC369EP 4 S 0.7 $ 309 $ 331“W” Wall Mount Kit — Radius Veneer Top Cap and Painted Trim69"H base panel TC369WP 5.2 S 0.7 $ 280 $ 3021st Option:Paint:See inside frontcover for finishes.TC P . P .Example: TC313BP.P27.NE800“W” Wall Mount Kits• Veneer top cap. (Color must be specified.)• Connector (black only — adds 1 1 ⁄16" to run).• Available only in 69" length. Cut in field forother lengths.VeneerShip Core Paint SelectDescription Model Weight Cubes List Price List Price2nd Option:Veneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 109STERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Veneer Top Cap / Veneer TrimGSA SIN 711-1• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 2.6Model Numberfrom above.ShipDescription Model Weight Cubes List Price“L” 90° Connector Kits — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313LV 2 S 0.2 $ 36726"H stacking/segmented TC326LV 3 S 0.4 $ 44839"H stacking/segmenting TC339LV 4 S 0.5 $ 53330"H base panel TC330LV 4 S 0.5 $ 49343"H base panel TC343LV 4 S 0.5 $ 55156"H base panel TC356LV 5 S 0.6 $ 63469"H base panel TC369LV 6 S 0.8 $ 740“T” 3-way Connector Kits — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313TV 2 S 0.2 $ 33026"H stacking/segmented TC326TV 3 S 0.4 $ 39439"H stacking/segmented TC339TV 4 S 0.5 $ 46630"H base panel TC330TV 4 S 0.5 $ 41843"H base panel TC343TV 4 S 0.5 $ 48556"H base panel TC356TV 5 S 0.6 $ 55369"H base panel TC369TV 6 S 0.8 $ 631“X” 4-way Connector Kits — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313XP 2 S 0.2 $ 19630"H base panel TC330XP 2 S 0.2 $ 24243"H base panel TC343XP 2 S 0.2 $ 25956"H base panel TC356XP 3 S 0.2 $ 28869"H base panel TC369XP 3 S 0.2 $ 3031st Option:Paint(Base Cover):See inside frontcover for finishes.TC3 . P .Example: TC313LV.P27.NE800“L” and “T” Connector Kits• Includes veneer top cap, connectors, veneervertical cover, light gap extrusion andattaching hardware.• Connector adds 2 3 ⁄4" to run.“X” Connector Kits• Includes veneer top cap and connectors.• Connector adds 2 3 ⁄4" to run.2nd Option:Veneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1For specification details refer to:Working with Frames, pages 85-88Note: Paint specificationnot required for “X”4-way connector kits.Shippable by small-package carrier.110 | Systems Supplement – 3/2013S

Connectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Veneer Top Cap / Veneer TrimGSA SIN 711-1• Veneer Radius Top Caps available inStratawood or Natural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.2-Way 120° Connector Kits• Includes veneer top cap, connectors, veneervertical cover, light gap extrusion andattaching hardware.3-Way 120° Connector Kits• Includes veneer top cap, connectors, veneervertical cover, light gap extrusion andattaching hardware.For specification details refer to:Working with Frames, pages 85-88TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.TC3 . PShipSelectDescription Model Weight Cubes List Price List Price2-Way 120° Connector — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313BV 2 S 0.2 $ 206 $ 22826"H stacking/segmented TC326BV 3 S 0.4 $ 237 $ 25939"H stacking/segmented TC339BV 4 S 0.5 $ 264 $ 28630"H base panel TC330BV 4 S 0.5 $ 249 $ 27143"H base panel TC343BV 4 S 0.5 $ 270 $ 29256"H base panel TC356BV 5 S 0.6 $ 280 $ 30269"H base panel TC369BV 6 S 0.8 $ 302 $ 3243-Way 120° Connector — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313CP 2 S 0.2 $ 206 N/A30"H base panel TC330CP 2 S 0.2 $ 249 N/A43"H base panel TC343CP 2 S 0.2 $ 270 N/A56"H base panel TC356CP 3 S 0.2 $ 280 N/A69"H base panel TC369CP 3 S 0.2 $ 302 N/A1st Option:Paint:See inside frontcover for finishes.Example: TC313BV.P27.NE8002nd Option:Veneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Note: Paint specificationnot required on 3-way120° connector kits.Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 111STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 2.6 — Connector Kits 2.6 to 2.6Radius — Veneer Top Cap / Veneer Trim• Veneer Radius Top Caps available in “E” End Trim KitsGSA SIN 711-1Stratawood or Natural 1 veneer.For specification details refer to:• End veneer vertical trim cover (includes• Stratawood veneer has a consistentWorking with Frames, pages 85-88veneer top cap trim — adds 3 ⁄8" to run).straight-grain pattern.• Natural veneer will have cathedrals and as a High-Low End Trim Kitsnatural material is subject to nature’s quality• End veneer vertical trim cover (includescontrol with variations in grain pattern andveneer top cap trim — addstone.⁄8" to run).“S” Connector Kits• Includes veneer top cap, connectors, veneervertical cover, light gap extrusion andattaching hardware.• Connector adds 2 3 ⁄4" to run.How to specify —Select theTerrace 2.6Model Numberfrom above.ShipDescription Model Weight Cubes List Price“S” Extended Straight Connector Kits — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313SV 3 S 0.2 $ 45726"H stacking/segmented TC326SV 4 S 0.4 $ 54839"H stacking/segmented TC339SV 5 S 0.5 $ 65430"H base panel TC330SV 5 S 0.5 $ 60543"H base panel TC343SV 5 S 0.5 $ 74656"H base panel TC356SV 6 S 0.6 $ 86669"H base panel TC369SV 8 S 0.8 $1001“E” End Trim Kits — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313EV 2 S 0.2 $ 31226"H stacking/segmented TC326EV 2 S 0.4 $ 33339"H stacking/segmented TC339EV 3 S 0.5 $ 35630"H base panel TC330EV 3 S 0.5 $ 35643"H base panel TC343EV 3 S 0.5 $ 39156"H base panel TC356EV 3 S 0.6 $ 45169"H base panel TC369EV 4 S 0.8 $ 534High-Low End Trim Kit — Radius Veneer Top Cap and Veneer Trim13"H TC313HV 1 S 0.1 $ 38126"H TC326HV 2 S 0.4 $ 43539"H TC339HV 2 S 0.3 $ 4971st Option:Paint(Base Cover):See inside frontcover for finishes.TC3 . P .Example: TC313SV.P27.NE800“W” Wall Mount Kits• Veneer top cap. (Color must be specified.)• Connector (black only — adds 1 1 ⁄8" to run).• Available only in 69" length. Cut in field forother lengths.VeneerShip Core Paint SelectDescription Model Weight Cubes List Price List Price“W” Wall Mount Kit (Veneer Top Cap)69"H base panel TC369WP 5.2 S 0.7 $ 280 $ 3022nd Option:Veneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Shippable by small-package carrier.112 | Systems Supplement – 3/2013S

ConnectorsMid-Range Connector Kit• Used to attach 2.6 to 3.4 only.Terrace 2.6 — Mid-Panel Connector KitsTerrace 2.6 to 3.4 ConnectionsFor specification details refer to:Working with Frames, page 89TERRACEHow to specify —Select theTerraceModel Numberfrom above.TN3MPShipListDescription Model Weight Cubes PriceMid-Panel Connector Kit (Black only) — 2.6 to 3.4One Kit TN3MP D4 S 0.2Example: TN3MPD Discontinued 8/29/2010Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 113SDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 2.6 — Connector Kits 3.4 to 2.6Radius — Veneer Top Cap / Painted Trim• Veneer Radius Top Caps available inCleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.Top Views of Transitional Connections3.42.6 T 2.6T – 3.4 to 2.6 to 2.6How to specify —Select theTerraceModel Numberfrom above.2.63.4 T 3.4T – 3.4 to 3.4 to 2.6VeneerShip Core Paint SelectDescription Model Weight Cubes List Price List Price“L” 90° Connector Kits — 3.4 to 2.6 — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313LTP D2 S 0.226"H stacking/segmented TC326LTP D3 S 0.439"H stacking/segmenting TC339LTP D4 S 0.530"H base panel TC330LTP D4 S 0.543"H base panel TC343LTP D4 S 0.556"H base panel TC356LTP D5 S 0.669"H base panel TC369LTP D6 S 0.8“T” 3-way Connector Kits — 3.4 to 2.6 to 2.6 — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313TNNP D2 S 0.226"H stacking/segmented TC326TNNP D3 S 0.439"H stacking/segmented TC339TNNP D4 S 0.530"H base panel TC330TNNP D4 S 0.543"H base panel TC343TNNP D4 S 0.556"H base panel TC356TNNP D5 S 0.669"H base panel TC369TNNP D6 S 0.8“T” 3-way Connector Kits — 3.4 to 3.4 to 2.6 — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313TTNP D2 S 0.226"H stacking/segmented TC326TTNP D3 S 0.439"H stacking/segmented TC339TTNP D4 S 0.530"H base panel TC330TTNP D4 S 0.543"H base panel TC343TTNP D4 S 0.556"H base panel TC356TTNP D5 S 0.669"H base panel TC369TTNP D6 S 0.8“S” Straight Connector Kits — 3.4 to 2.6 (fills 2 3 ⁄4" wide gap) — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313STP D3 S 0.2DD26"H stacking/segmented TC326STP D4 S 0.4DD39"H stacking/segmented TC339STP D5 S 0.5DD30"H base panel TC330STP D5 S 0.5DD43"H base panel TC343STP D5 S 0.5DD56"H base panel TC356STP D6 S 0.6DD69"H base panel TC369STP D8 S 0.8DD1st Option:Paint:See inside frontcover for finishes.TC3 P . P .Example: TC313LTP.P02.CC701• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.2.63.4 S 3.4S – 3.4 to 2.62nd Option:Veneer Typeand Finish:See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1“L” and “T” Connector Kits• Includes veneer top cap, connectors, paintedvertical cover and attaching hardware.• 2.6 connector adds 2 3 ⁄4" to run; 3.4 connectoradds 3 1 ⁄2" to run.• “T” connectors availablein both 3.4 to 2.6 to 2.6 connections and3.4 to 3.4 to 2.6 connections.D Discontinued 8/29/2010S Shippable by small-package carrier.114 | Systems Supplement – 3/2013DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

Connectors Terrace 2.6 — Connector 3.4 to 2.6Radius — Veneer Top Cap / Painted Trim• Veneer Radius Top Caps available inCleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.“X” Connector Kits• Includes veneer top cap and connectors.• Connector adds 2 3 ⁄4" or 3 1 ⁄2" to run.High-Low End Trim Kits• End painted vertical cover (includes veneertop cap).For specification details refer to:Working with Frames, pages 85-88TERRACEHow to specify —Select theTerraceModel Numberfrom above.VeneerShip Core Paint SelectDescription Model Weight Cubes List Price List Price“X” 4-way Connector Kits — 3.4 to 2.6 — Radius Veneer Top Cap and Painted Trim13"H stacking/segmented TC313XTP D2 S 0.230"H base panel TC330XTP D2 S 0.243"H base panel TC343XTP D2 S 0.256"H base panel TC356XTP D3 S 0.269"H base panel TC369XTP D3 S 0.2High-Low End Trim Kit for 3.4 — Radius Veneer Top Cap and Painted Trim13"H TC313HTP D2 S 0.226"H TC326HTP D2 S 0.439"H TC339HTP D3 S 0.51st Option:Paint:See inside frontcover for finishes.TC3 TP . P .Example: TC313XTP.P02.NC5112nd Option:Veneer Typeand Finish:See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 115SDDDDDDDDD Discontinued 8/29/2010DDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEConnectors Terrace 2.6 — Connector Kits 3.4 to 2.6Radius — Veneer Top Cap / Veneer Trim• Veneer Radius Top Caps available inCleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.Top Views of Transitional Connections3.42.6 T 2.6T – 3.4 to 2.6 to 2.6How to specify —Select theTerraceModel Numberfrom above.2.63.4 T 3.4T – 3.4 to 3.4 to 2.6ShipDescription Model Weight Cubes List Price“L” 90° Connector Kits — 3.4 to 2.6 — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313LTV D2 S 0.226"H stacking/segmented TC326LTV D3 S 0.439"H stacking/segmenting TC339LTV D4 S 0.530"H base panel TC330LTV D4 S 0.543"H base panel TC343LTV D4 S 0.556"H base panel TC356LTV D5 S 0.669"H base panel TC369LTV D6 S 0.8“T” 3-way Connector Kits — 3.4 to 2.6 to 2.6 — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313TNNV D2 S 0.226"H stacking/segmented TC326TNNV D3 S 0.439"H stacking/segmented TC339TNNV D4 S 0.530"H base panel TC330TNNV D4 S 0.543"H base panel TC343TNNV D4 S 0.556"H base panel TC356TNNV D5 S 0.669"H base panel TC369TNNV D6 S 0.8“T” 3-way Connector Kits — 3.4 to 3.4 to 2.6 — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313TTNV D2 S 0.226"H stacking/segmented TC326TTNV D3 S 0.439"H stacking/segmented TC339TTNV D4 S 0.530"H base panel TC330TTNV D4 S 0.543"H base panel TC343TTNV D4 S 0.556"H base panel TC356TTNV D5 S 0.669"H base panel TC369TTNV D6 S 0.81st Option:Paint(Base Cover):See inside frontcover for finishes.TC3 V . P .Example: TC313LTV.P02.NC215• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.2.63.4 S 3.4S – 3.4 to 2.62nd Option:Veneer Typeand Finish:See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1“L” and “T” Connector Kits• Includes veneer top cap, connectors, veneervertical cover and attaching hardware.• 2.6 connector adds 2 3 ⁄4" to run; 3.4 connectoradds 3 1 ⁄2" to run.• “T” connectors availablein both 3.4 to 2.6 to 2.6 connections and3.4 to 3.4 to 2.6 connections.“S” Straight Connector Kits — 3.4 to 2.6 (fills 2 3 ⁄4" wide gap) — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313STV D3 S 0.2D26"H stacking/segmented TC326STV D4 S 0.4D39"H stacking/segmented TC339STV D5 S 0.5D30"H base panel TC330STV D5 S 0.5D43"H base panel TC343STV D5 S 0.5D56"H base panel TC356STV D6 S 0.6D69"H base panel TC369STV D8 S 0.8DD Discontinued 8/29/2010S Shippable by small-package carrier.116 | Systems Supplement – 3/2013DDDDDDDDDDDDDDDDDDDDD

Connectors Terrace 2.6 — Connector Kits 3.4 to 2.6Radius — Veneer Top Cap / Veneer Trim• Veneer Radius Top Caps available inCleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.“X” Connector Kits• Includes veneer top cap and connectors.• Connector adds 2 3 ⁄4" or 3 1 ⁄2" to run.High-Low End Trim Kits• End veneer vertical cover (includes veneer topcap).For specification details refer to:Working with Frames, pages 85-88TERRACEHow to specify —Select theTerraceModel Numberfrom above.ShipDescription Model Weight Cubes List Price“X” 4-way Connector Kits — 3.4 to 2.6 — Radius Veneer Top Cap and Veneer Trim13"H stacking/segmented TC313XTP D2 S 0.230"H base panel TC330XTP D2 S 0.243"H base panel TC343XTP D2 S 0.256"H base panel TC356XTP D3 S 0.269"H base panel TC369XTP D3 S 0.2High-Low End Trim Kit for 3.4 — Radius Veneer Top Cap and Veneer Trim13"H TC313HTV D2 S 0.226"H TC326HTV D2 S 0.439"H TC339HTV D3 S 0.51st Option:Paint:See inside frontcover for finishes.TC3 . P .Example: TC313XTP.P02.CC2602nd Option:Veneer Typeand Finish:See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1D Discontinued 8/29/2010Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 117SDDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesMonolithic Tackable Acoustical Tiles• Monolithic tile (with factory-installedattachment clips).• Tackable and acoustical.How to specify —Select theTerrace 2.6Model Numberfrom above.TN T .ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 630"H Monolithic Tackable Acoustical Tiles20"W TN43020T 2 S 0.8 $ 108 $ 120 $ 128 $ 150 $ 170 $ 20224"W TN43024T 2 S 0.8 $ 108 $ 120 $ 128 $ 150 $ 170 $ 20230"W TN43030T 2 S 1.0 $ 113 $ 125 $ 133 $ 169 $ 194 $ 23436"W TN43036T 2 S 1.1 $ 129 $ 144 $ 156 $ 202 $ 233 $ 27842"W TN43042T 3 1.3 $ 147 $ 162 $ 174 $ 221 $ 255 $ 30448"W TN43048T 3 1.5 $ 151 $ 165 $ 177 $ 225 $ 259 $ 30960"W TN43060T 4 1.9 $ 161 $ 177 $ 192 $ 245 $ 283 $ 3191st Option:Fabric:See inside backcover for fabrics.Example: TN96936T.GN953Terrace 2.6 — Monolithic Tackable Acoustical Tiles43"H Monolithic Tackable Acoustical Tiles20"W TN94320T 2 S 1.2 $ 130 $ 152 $ 181 $ 223 $ 246 $ 29824"W TN94324T 2 S 1.7 $ 130 $ 152 $ 181 $ 223 $ 246 $ 29830"W TN94330T 3 S 2.1 $ 141 $ 163 $ 188 $ 233 $ 263 $ 31236"W TN94336T 4 S 2.5 $ 171 $ 198 $ 220 $ 278 $ 312 $ 38742"W TN94342T 4 2.9 $ 187 $ 214 $ 242 $ 304 $ 354 $ 43548"W TN94348T 5 3.3 $ 195 $ 223 $ 251 $ 316 $ 377 $ 45960"W TN94360T 6 4.1 $ 220 $ 248 $ 278 $ 352 $ 421 $ 51856"H Monolithic Tackable Acoustical Tiles20"W TN95620T 3 2.0 $ 155 $ 179 $ 199 $ 248 $ 302 $ 36424"W TN95624T 3 2.3 $ 155 $ 179 $ 199 $ 248 $ 302 $ 36430"W TN95630T 4 2.8 $ 170 $ 195 $ 214 $ 270 $ 326 $ 39436"W TN95636T 5 3.3 $ 198 $ 229 $ 255 $ 321 $ 389 $ 46842"W TN95642T 6 3.8 $ 220 $ 248 $ 278 $ 352 $ 421 $ 50948"W TN95648T 6 4.3 $ 224 $ 254 $ 280 $ 359 $ 433 $ 51860"W TN95660T 8 5.4 $ 243 $ 282 $ 314 $ 391 $ 471 $ 56769"H Monolithic Tackable Acoustical Tiles20"W TN96920T 4 2.8 $ 204 $ 229 $ 253 $ 316 $ 376 $ 44924"W TN96924T 4 2.8 $ 214 $ 241 $ 270 $ 341 $ 409 $ 49230"W TN96930T 5 3.4 $ 231 $ 262 $ 289 $ 368 $ 447 $ 53636"W TN96936T 6 4.1 $ 268 $ 316 $ 349 $ 435 $ 524 $ 63142"W TN96942T 7 4.7 $ 295 $ 342 $ 374 $ 473 $ 568 $ 68448"W TN96948T 8 5.4 $ 303 $ 347 $ 380 $ 485 $ 582 $ 70260"W TN96960T 10 6.7 $ 326 $ 376 $ 417 $ 527 $ 635 $ 766Packaging: Tiles will be multi-packed toreduce packaging materials and to providebetter structural support during shipping. Itemsrequiring individual shipping should be taggedon the order with different descriptive locationsto simplify the staging process.GSA SIN 711-1For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95Shippable by small-package carrier.118 | Systems Supplement – 3/2013S

TilesMonolithic Port Tiles• Monolithic port tile (with factory-installedattachment clips).• Receptacle openings with blank covers (1 in24"W tiles; 2 in wider tiles)• Tackable and acoustical.• Specify the size that matches the frame size.One tile per side.Terrace 2.6 — Monolithic Port TilesGSA SIN 711-1For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 643"H Monolithic Port Tiles24"W TN94324E 2 S 1.7 $ 200 $ 222 $ 251 $ 293 $ 316 $ 36830"W TN94330E 3 S 2.1 $ 211 $ 233 $ 258 $ 303 $ 333 $ 38236"W TN94336E 4 S 2.5 $ 243 $ 270 $ 292 $ 350 $ 384 $ 45942"W TN94342E 4 2.9 $ 257 $ 284 $ 312 $ 374 $ 424 $ 50548"W TN94348E 5 3.3 $ 267 $ 295 $ 323 $ 388 $ 449 $ 53160"W TN94360E 6 4.1 $ 288 $ 316 $ 346 $ 420 $ 489 $ 58656"H Monolithic Port Tiles24"W TN95624E 3 2.3 $ 226 $ 250 $ 270 $ 319 $ 373 $ 43530"W TN95630E 4 2.8 $ 239 $ 263 $ 283 $ 339 $ 395 $ 46336"W TN95636E 5 3.3 $ 269 $ 300 $ 326 $ 392 $ 460 $ 53942"W TN95642E 6 3.8 $ 288 $ 316 $ 346 $ 420 $ 489 $ 57748"W TN95648E 6 4.3 $ 295 $ 325 $ 351 $ 430 $ 504 $ 58960"W TN95660E 8 5.4 $ 311 $ 350 $ 382 $ 459 $ 539 $ 63569"H Monolithic Port Tiles24"W TN96924E 4 2.8 $ 284 $ 311 $ 340 $ 411 $ 479 $ 56230"W TN96930E 5 3.4 $ 300 $ 331 $ 358 $ 437 $ 516 $ 60536"W TN96936E 6 4.1 $ 338 $ 386 $ 419 $ 505 $ 594 $ 70142"W TN96942E 7 4.7 $ 366 $ 413 $ 445 $ 544 $ 639 $ 75548"W TN96948E 8 5.4 $ 376 $ 420 $ 453 $ 558 $ 655 $ 77560"W TN96960E 10 6.7 $ 396 $ 446 $ 487 $ 597 $ 705 $ 836Packaging: Tiles will be multi-packed to reduce packaging materials and to provide better structural support duringshipping. Items requiring individual shipping should be tagged on the order with different descriptivelocations to simplify the staging process.1st Option:Fabric:See inside backcover for fabrics.TN9 E . .2nd Option:Electrical GrommetColor:See inside frontcover for finishes.EExample: TN96936E.GN953.E9Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 119STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesTackable Acoustical Tiles• Tackable acoustical tile (with factory installedattachment clips).• Includes segment kits (specify paint color).• Base tile has no segment kit; no paint colorspecified.How to specify —Select theTerrace 2.6Model Numberfrom above.TN4 .Terrace 2.6 — Tackable Acoustical TilesShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 613"H Tackable Acoustical Tiles (not for use at base)20"W TN41320T 1 S 0.4 $ 77 $ 85 $ 92 $ 103 $ 124 $ 14124"W TN41324T 1 S 0.4 $ 77 $ 85 $ 92 $ 103 $ 124 $ 14130"W TN41330T 1 S 0.5 $ 82 $ 94 $ 102 $ 112 $ 132 $ 15536"W TN41336T 1 S 0.6 $ 93 $ 105 $ 113 $ 129 $ 156 $ 17442"W TN41342T 1 S 0.7 $ 102 $ 114 $ 122 $ 151 $ 173 $ 19048"W TN41348T 2 S 0.8 $ 112 $ 124 $ 132 $ 162 $ 185 $ 20360"W TN41360T 2 S 1.0 $ 116 $ 128 $ 138 $ 172 $ 189 $ 20726"H Tackable Acoustical Tiles (not for use at base)20"W TN42620T 2 S 0.8 $ 108 $ 120 $ 128 $ 150 $ 170 $ 20224"W TN42624T 2 S 0.8 $ 108 $ 120 $ 128 $ 150 $ 170 $ 20230"W TN42630T 2 S 1.0 $ 113 $ 125 $ 133 $ 169 $ 194 $ 23436"W TN42636T 2 S 1.1 $ 129 $ 144 $ 156 $ 202 $ 233 $ 27842"W TN42642T 3 S 1.3 $ 147 $ 162 $ 174 $ 221 $ 255 $ 30448"W TN42648T 3 S 1.5 $ 151 $ 165 $ 177 $ 225 $ 259 $ 30960"W TN42660T 4 S 1.9 $ 161 $ 177 $ 192 $ 245 $ 283 $ 31930"H Monolithic Tackable Acoustical Base Tiles20"W TN43020T 2 S 0.8 $ 108 $ 120 $ 128 $ 150 $ 170 $ 20224"W TN43024T 2 S 0.8 $ 108 $ 120 $ 128 $ 150 $ 170 $ 20230"W TN43030T 2 S 1.0 $ 113 $ 125 $ 133 $ 169 $ 194 $ 23436"W TN43036T 2 S 1.1 $ 129 $ 144 $ 156 $ 202 $ 233 $ 27842"W TN43042T 3 1.3 $ 147 $ 162 $ 174 $ 221 $ 255 $ 30448"W TN43048T 3 1.5 $ 151 $ 165 $ 177 $ 225 $ 259 $ 30960"W TN43060T 4 1.9 $ 161 $ 177 $ 192 $ 245 $ 283 $ 31939"H Tackable Acoustical Tiles — for Back of Reach Storage Unit (not for use at base)36"W TN43936T D D 3 1.8 D D D D D D D D42"W TN43942T D D 4 2.1 D D D D D D D D48"W TN43948T D D 4 2.5 D D D D D D D DPackaging: Tiles will be multi-packed to reduce packaging materials and to provide better structural support duringshipping. Items requiring individual shipping should be tagged on the order with different descriptivelocations to simplify the staging process.1st Option:Fabric:See inside backcover for fabrics.2nd Option:Paint:See inside frontcover for finishes.P .Example: TN41324T.CS918.P02• 13"H, 26"H, and 39"H tiles are for use atbeltline and above. Initial base tile needs to bea 30"H or taller monolithic tile.For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95Shippable by small-package carrier.120 | Systems Supplement – 3/2013SGSA SIN 711-1D DD DD DD D Discontinued 2/12/2012D DD DD D

TilesPort Tiles• 13"H and 26"H data/electrical port tile (withfactory-installed attachment clips).• Receptacle openings with blank covers (1 in24"W tiles; 2 in wider tiles).• Receptacle openings have the ability to acceptmost commercially available modular datafaceplates.• Includes segment kits (specify paint color).Terrace 2.6 — Ported TilesFor specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95GSA SIN 711-1TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.TN4 .ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 613"H Tackable Acoustical Tiles — Ported24"W TN41324E 1 S 0.4 $ 151 $ 159 $ 164 $ 177 $ 198 $ 21530"W TN41330E 1 S 0.5 $ 157 $ 169 $ 177 $ 187 $ 207 $ 23036"W TN41336E 1 S 0.6 $ 170 $ 182 $ 190 $ 206 $ 233 $ 25142"W TN41342E 1 S 0.7 $ 177 $ 189 $ 197 $ 226 $ 248 $ 26548"W TN41348E 2 S 0.8 $ 187 $ 199 $ 207 $ 237 $ 260 $ 27860"W TN41360E 2 S 1.0 $ 191 $ 203 $ 213 $ 247 $ 264 $ 28226"H Tackable Acoustical Tiles — for Back of Reach Storage Unit — Ported36"W TN42636E D D 2 1.1 D D D D D D42"W TN42642E D D 3 2.1 D D D D D D48"W TN42648E D D 3 1.5 D D D D D DPackaging: Tiles will be multi-packed to reduce packaging materials and to provide better structural support duringshipping. Items requiring individual shipping should be tagged on the order with different descriptivelocations to simplify the staging process.1st Option:Fabric:See inside backcover for fabrics.2nd Option:Paint:See inside frontcover for finishes.P .Example: TN41324E.CS928.P02.E93rd Option:Electrical GrommetColor:See inside frontcover for finishes.Systems Supplement – 3/2013 allsteeloffice.com | 121ESD DD DD DD DD DD DD D Discontinued 2/12/2012D DD DD DShippable by small-package carrier.TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesSolid Steel Tiles• Painted steel construction.• Available in Core and Select paint.How to specify —Select theTerrace 2.6Model Numberfrom above.TN4 FS .13"H Steel Tiles20"W TN41320FS D D10 0.424"W TN41324FS D D10 0.430"W TN41330FS D D12 0.636"W TN41336FS D D14 0.642"W TN41342FS D D16 0.748"W TN41348FS D D19 0.760"W TN41360FS D D23 0.926"H Steel Tiles20"W TN42620FS D D14 0.724"W TN42624FS D D14 0.730"W TN42630FS D D16 1.036"W TN42636FS D D18 1.042"W TN42642FS D D20 1.748"W TN42648FS D D23 1.760"W TN42660FS D D25 2.830"H Steel Base Tiles20"W TN43020FS D D14 0.724"W TN43024FS D D14 0.730"W TN43030FS D D16 1.036"W TN43036FS D D18 1.042"W TN43042FS D D20 1.748"W TN43048FS D D23 1.760"W TN43060FS D D25 2.8Terrace 2.6 — Steel TilesShipSelectDescription Model Weight Cubes List Price List Price1st Option:Paint:See inside frontcover for finishes.P .Example: TN41324FS.P02For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95Shippable by small-package carrier.122 | Systems Supplement – 3/2013SD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DGSA SIN 711-1D D Discontinued 2/12/2012D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesSteel Mesh Tiles• Steel mesh tile.• Allows air flow when placed on each side ofpanel.• Includes segment kits — specify bothhorizontal and vertical/mesh colors.Terrace 2.6 — Steel Mesh TilesGSA SIN 711-1For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.TN4ShipSelectDescription Model Weight Cubes List Price List Price13"H Steel Mesh Tiles20"W TN41320SM 10 0.4 $ 220 $ 24524"W TN41324SM 10 0.4 $ 220 $ 24530"W TN41330SM 12 0.6 $ 229 $ 25436"W TN41336SM 14 0.6 $ 247 $ 27242"W TN41342SM 16 0.7 $ 271 $ 29648"W TN41348SM 19 0.7 $ 303 $ 32860"W TN41360SM 23 0.9 $ 336 $ 36126"H Steel Mesh Tiles20"W TN42620SM D D14 0.724"W TN42624SM D D14 0.730"W TN42630SM D D16 1.036"W TN42636SM D D18 1.042"W TN42642SM D D20 1.748"W TN42648SM D D23 1.760"W TN42660SM D D25 2.830"H Steel Mesh Base Tiles20"W TN43020SM 14 0.7 $ 235 $ 27724"W TN43024SM 14 0.7 $ 235 $ 27730"W TN43030SM 16 1.0 $ 258 $ 30036"W TN43036SM 18 1.0 $ 297 $ 33942"W TN43042SM 20 1.7 $ 315 $ 35748"W TN43048SM 23 1.7 $ 354 $ 39660"W TN43060SM 25 2.8 $ 403 $ 445SM.1st Option:HorizontalPaint Color:See inside frontcover for finishes.P .PExample: TN41324SM.P27.P272nd Option:MeshPaint Color:See inside frontcover for finishes.Systems Supplement – 3/2013 allsteeloffice.com | 123D DD DD DD DD DD DD DD D Discontinued 2/12/2012D DD DD DD DD DD DD DTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesTool Tiles• Sturdy aluminum extrusion with steel supportconstruction.• Powder-coated for durable finish.• Work Tools to be hung from this tile availablein Extensions section of this pricer.• Use in place of a standard 13"H tile.• Weight capacity not to exceed 80 lbs.• 60" tile to be used at beltline only. (Can beused in top position of 43" tall frames.)Tool Tiles for Reach• Use in place of a standard 13"H tile on backside of Reach storage at top most position orHow to specify —Select theTerrace 2.6Model Numberfrom above.TN .Terrace 2.6 — Tool TilesTool Tile shown with Work Tools(Work Tools on pages 330-331)ShipSelectDescription Model Weight Cubes List Price List Price13"H Tool Tiles — used to support Extensions paper management accessories24"W TN41324SW 10 S 0.4 $ 242 $ 28030"W TN41330SW 12 S 0.6 $ 257 $ 29536"W TN41336SW 14 S 0.6 $ 280 $ 31842"W TN41342SW 16 S 0.7 $ 297 $ 33548"W TN41348SW 19 S 0.7 $ 314 $ 35260"W TN41360SW 23 S 0.9 $ 331 $ 36913"H Tool Tiles for Reach— used to support Extensions paper management accessories36"W TN41336SWF D D14 S 0.6D D42"W TN41342SWF D D16 S 0.7D D48"W TN41348SWF D D19 S 0.7D DNOTE: For locations other than top most position, use standard tool tiles above (no “F” suffix).1st Option:Tool TilePaint Color:See inside frontcover for finishes.PExample: TN41324SW.P02below an open top shelf. For other locationsuse standard tool tile.• Weight capacity not to exceed 80 lbs.• Terrace 2.6 48"W and 60"W Tool Tilescannot be positioned at any panel locationwhere power or pass-through harness ispositioned.Terrace 2.6 Horizontal Stiffener Supports• Optional support used to increase the stiffnessof interior on Terrace 2.6 panels.• Can only be used with acoustical tile on oneside and tool tile on the other.• Includes attaching hardware.• Black only.For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95Shippable by small-package carrier.124 | Systems Supplement – 3/2013SGSA SIN 711-1D DD DD DShipDescription Model Weight Cubes List PriceTerrace 2.6 Horizontal Stiffener Support (for use with acoustical tile on one side and tool tile on the other side)24"W TN224ST 4 S 0.4 $ 4330"W TN230ST 4 S 0.4 $ 4636"W TN236ST 4 S 0.4 $ 5142"W TN242ST 4 S 0.5 $ 6448"W TN248ST 4 S 0.6 $ 6960"W TN260ST 4 S 0.7 $ 76D D Discontinued 2/12/2012

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesInfinite Spectrum Tiles• 1 ⁄4" thick custom tile attaches with CustomTile Bracket Kit — included.• Applicable to 13"H, 26"H and 30"H panelsegments and all panel widths.• Infinite Spectrum is a color-matched 100%recyclable polyester resin material.• Sample kit (below) required to confirmPANTONE color meets expectations.• Review of PANTONE sample and customerapproval required prior to order entry.How to specify —Select theTerrace 2.6Model Numberfrom above.Terrace 2.6 — Infinite Spectrum TilesShipListDescription Model Weight Cubes Price13"H Infinite Spectrum Tiles20"W TN41320SP D D10 0.424"W TN41324SP D D10 0.430"W TN41330SP D D12 0.636"W TN41336SP D D14 0.642"W TN41342SP D D16 0.748"W TN41348SP D D19 0.760"W TN41360SP D D23 0.926"H Infinite Spectrum Tiles20"W TN42620SP D D14 0.724"W TN42624SP D D14 0.730"W TN42630SP D D16 1.036"W TN42636SP D D18 1.042"W TN42642SP D D20 1.748"W TN42648SP D D23 1.760"W TN42660SP D D25 2.830"H Infinite Spectrum Base Tiles20"W TN43020SP D D14 0.724"W TN43024SP D D14 0.730"W TN43030SP D D16 1.036"W TN43036SP D D18 1.042"W TN43042SP D D20 1.748"W TN43048SP D D23 1.760"W TN43060SP D D25 2.8Infinite Spectrum Sample Kit*Infinite Spectrum 4"x6" sample TN4SPSK D D1 0.1D D*Allsteel is not responsible for PANTONE matching. It is the sole responsibility of the dealer and/or customer to ensurePANTONE color is correct. To ensure matching order Infinite Spectrum Sample Kit model TN4SPSK prior to orderentry.1st Option:PANTONEColor:Use print or paints andinteriors color guidenumber.TN4 . .• Specify PANTONE color using a PANTONEprint or paints and interiors color guidenumber or PANTONE MATCHINGSYSTEM ® . When using the print color guide,use the uncoated (U) color references,metallics not available.• Visit pantone.com for additional PANTONEinformation.2nd Option:HorizontalPaint Color:See inside frontcover for finishes.P .3rd Option:VerticalPaint Color:See inside frontcover for finishes.GSA SIN 711-1Example: TN42624SP.19-1759TPX.P27.P27126 | TT4SPSK.658U.P27.P27Systems Supplement – 3/2013PFor specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95D D Discontinued 2/12/2012D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesTerrace 2.6 — Foundation TilesFoundation Tiles• 1 ⁄4" thick custom tile attaches with CustomTile Bracket Kit — included.• Applicable to 13"H, 26"H and 30"H panelsegments and all panel widths.• Suspends fabric between 100% recyclablePETG resin sheets.GSA SIN 711-1For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.TN4 FD .ShipDescription Model Weight Cubes List Price13"H Foundation Tiles20"W TN41320FD D D10 0.424"W TN41324FD D D10 0.430"W TN41330FD D D12 0.636"W TN41336FD D D14 0.642"W TN41342FD D D16 0.748"W TN41348FD D D19 0.760"W TN41360FD D D23 0.926"H Foundation Tiles20"W TN42620FD D D14 0.724"W TN42624FD D D14 0.730"W TN42630FD D D16 1.036"W TN42636FD D D18 1.042"W TN42642FD D D20 1.748"W TN42648FD D D23 1.760"W TN42660FD D D25 2.830"H Foundation Base Tiles20"W TN43020FD D D14 0.724"W TN43024FD D D14 0.730"W TN43030FD D D16 1.036"W TN43036FD D D18 1.042"W TN43042FD D D20 1.748"W TN43048FD D D23 1.760"W TN43060FD D D25 2.81st Option:FoundationColors:FD01 SandFD02 TaupeFD03 CaramelFD04 Pure WhiteFD05 FlintFD .2nd Option:HorizontalPaint Color:See inside frontcover for finishes.P .Examples: TN42624FD.FD03.P7D.P7D3rd Option:VerticalPaint Color:See inside frontcover for finishes.Systems Supplement – 3/2013 allsteeloffice.com | 127PD D Discontinued 2/12/2012D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

TilesTerrace 2.6 — Mulberry Paper Tiles (without overlap)FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEMulberry Paper Tiles• Applicable to 13"H (without overlap), 26"Hand 30"H panel segments and all panelwidths.• Color for Mulberry Paper must bespecified — see options below.• Mulberry Paper material is laminatedbetween two PETG resin sheets.• Includes segment kit — specify bothhorizontal and vertical colors.How to specify —Select theTerrace 2.6Model Numberfrom above.TN4 SMP .• When connecting segmented 2.6 to segmented3.4, black (P27) is recommended forhorizontal segment paint color.ShipDescription Model Weight Cubes List Price13"H Mulberry Paper Tiles (without overlap)20"W TN41320SMP D D10 0.424"W TN41324SMP D D10 0.430"W TN41330SMP D D12 0.636"W TN41336SMP D D14 0.642"W TN41342SMP D D16 0.748"W TN41348SMP D D19 0.760"W TN41360SMP D D23 0.926"H Mulberry Paper Tiles (without overlap)20"W TN42620SMP D D14 0.724"W TN42624SMP D D14 0.730"W TN42630SMP D D16 1.036"W TN42636SMP D D18 1.042"W TN42642SMP D D20 1.748"W TN42648SMP D D23 1.760"W TN42660SMP D D25 2.830"H Mulberry Paper Base Tiles (without overlap)20"W TN43020SMP D D14 0.724"W TN43024SMP D D14 0.730"W TN43030SMP D D16 1.036"W TN43036SMP D D18 1.042"W TN43042SMP D D20 1.748"W TN43048SMP D D23 1.760"W TN43060SMP D D25 2.81st Option:Mulberry Paper (without overlap)Colors:SMP01SMP02MojaveGobiSMP . P .Example: TN42630SMP.SMP01.P02.P022nd Option:HorizontalPaint Color:See inside frontcover for finishes.GSA SIN 711-1For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 953rd Option:VerticalPaint Color:See inside frontcover for finishes.128 | Systems Supplement – 3/2013PMulberry Paper Tile(without overlap)D D Discontinued 2/12/2012D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesTerrace 2.6 — Pearlescent Strata TilesPearlescent Strata Tiles• 1 ⁄4" thick custom tile attaches with CustomTile Bracket Kit — included.• Applicable to 13"H, 26"H and 30"H panelsegments and all panel widths.• 100% recyclable polyester resin material.GSA SIN 711-1For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.TN4 PS .ShipDescription Model Weight Cubes List Price13"H Pearlescent Strata Tiles20"W TN41320PS D D10 0.424"W TN41324PS D D10 0.430"W TN41330PS D D12 0.636"W TN41336PS D D14 0.642"W TN41342PS D D16 0.748"W TN41348PS D D19 0.760"W TN41360PS D D23 0.926"H Pearlescent Strata Tiles20"W TN42620PS D D14 0.724"W TN42624PS D D14 0.730"W TN42630PS D D16 1.036"W TN42636PS D D18 1.042"W TN42642PS D D20 1.748"W TN42648PS D D23 1.760"W TN42660PS D D25 2.830"H Pearlescent Strata Base Tiles20"W TN43020PS D D14 0.724"W TN43024PS D D14 0.730"W TN43030PS D D16 1.036"W TN43036PS D D18 1.042"W TN43042PS D D20 1.748"W TN43048PS D D23 1.760"W TN43060PS D D25 2.81st Option:Pearlescent StrataColors:PS01PS02PS03PS04PS05PS07GlacierShadowSea Foam !ShellTortoiseQuartzPS .P .Example: TN43030PS.PS02.P27.P272nd Option:HorizontalPaint Color:See inside frontcover for finishes.3rd Option:VerticalPaint Color:See inside frontcover for finishes.Systems Supplement – 3/2013 allsteeloffice.com | 129PD D Discontinued 2/12/2012D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

TilesTerrace 2.6 — Frequency TilesFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEFrequency Tiles• 1 ⁄4" thick custom tile attaches with CustomTile Bracket Kit — included.• Applicable to 13"H, 26"H and 30"H panelsegments and all panel widths.• 100% recyclable polyester resin material.How to specify —Select theTerrace 2.6Model Numberfrom above.TN4ShipDescription Model Weight Cubes List Price13"H Frequency Tiles20"W TN41320FQ D10 S 0.424"W TN41324FQ D10 S 0.430"W TN41330FQ D12 S 0.636"W TN41336FQ D14 S 0.642"W TN41342FQ D16 S 0.748"W TN41348FQ D19 S 0.760"W TN41360FQ D23 S 0.926"H Frequency Tiles20"W TN42620FQ D14 S 0.724"W TN42624FQ D14 S 0.730"W TN42630FQ D16 S 1.036"W TN42636FQ D18 S 1.042"W TN42642FQ D20 S 1.748"W TN42648FQ D23 S 1.760"W TN42660FQ D25 S 2.830"H Frequency Base Tiles20"W TN43020FQ D14 S 0.724"W TN43024FQ D14 S 0.730"W TN43030FQ D16 S 1.036"W TN43036FQ D18 S 1.042"W TN43042FQ D20 S 1.748"W TN43048FQ D23 S 1.760"W TN43060FQ D25 S 2.8FQ.1st Option:FrequencyColors:FQ01 PlatinumFQ02 ParchmentFQ .2nd Option:HorizontalPaint Color:P .Example: TN41324FQ.FQ02.P27.P27See inside frontcover for finishes.3rd Option:VerticalPaint Color:See inside frontcover for finishes.For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95D Discontinued 8/29/2010S Shippable by small-package carrier.130 | Systems Supplement – 3/2013PDDDDDDDDDDDDDDDDDDDDD

TilesPorcelain Marker Board Tiles• White marker board tile; porcelain-coatedsteel surface. Accepts magnetic accessories.• 15" magnetically attached tray is naturalaluminum color (use is optional).High-Pressure LaminateMarker Board Tile• White marker board tile; high-pressurelaminate latches with Custom Tile BracketKit — included.• Does not include tray.Terrace 2.6 — Marker Board TilesFor specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95GSA SIN 711-1TERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.TN4 .ShipListDescription Model Weight Cubes Price13"H Porcelain Marker Board Tiles24"W TN41324M D D4 S 0.7D D30"W TN41330M D D4 S 0.8D D36"W TN41336M D D5 S 1.0D D42"W TN41342M D D5 S 1.1D D48"W TN41348M D D6 S 1.3D D60"W TN41360M D D7 S 1.6D D26"H Porcelain Marker Board Tiles24"W TN42624M D D6 S 1.230"W TN42630M D D7 S 1.536"W TN42636M D D8 S 1.742"W TN42642M D D10 S 2.048"W TN42648M D D11 S 2.360"W TN42660M D D13 S 2.913"H High-Pressure Laminate Marker Board Tiles24"W TN41324NML D5 S 1.130"W TN41330NML D5 S 1.236"W TN41336NML D6 S 1.542"W TN41342NML D6 S 1.648"W TN41348NML D8 S 1.960"W TN41360NML D9 S 2.426"H High-Pressure Laminate Marker Board Tiles24"W TN42624NML D7 S 1.630"W TN42630NML D8 S 1.936"W TN42636NML D9 S 2.242"W TN42642NML D11 S 2.548"W TN42648NML D13 S 2.960"W TN42660NML D15 S 3.71st Option:HorizontalPaint Color:See inside frontcover for finishes.P .Examples: TN41324M.PR2.PR22nd Option:VerticalPaint Color:See inside frontcover for finishes.PD D Discontinued 2/12/2012D Discontinued 8/29/2010Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 131SD DD DD DD DD DD DDDDDDDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesHard Surface Tiles• Melamine-coated MDF construction.• Available in three laminate colors:Whitestone, Beigestone and Black.• Includes segment kit — specify bothhorizontal and vertical colors.How to specify —Select theTerrace 2.6Model Numberfrom above.TN4 NHS .• When connecting segmented 2.6 to segmented3.4, black (P27) is recommended forhorizontal segment kit paint color.13"H Hard Surface Tiles20"W TN41320NHS D D10 S 0.424"W TN41324NHS D D10 S 0.430"W TN41330NHS D D12 S 0.636"W TN41336NHS D D14 S 0.642"W TN41342NHS D D16 S 0.748"W TN41348NHS D D19 S 0.760"W TN41360NHS D D23 S 0.926"H Hard Surface Tiles20"W TN42620NHS D D14 S 0.724"W TN42624NHS D D14 S 0.730"W TN42630NHS D D16 S 1.036"W TN42636NHS D D18 S 1.042"W TN42642NHS D D20 S 1.748"W TN42648NHS D D23 S 1.760"W TN42660NHS D D25 S 2.830"H Hard Surface Base Tiles20"W TN43020NHS D D14 S 0.724"W TN43024NHS D D14 S 0.730"W TN43030NHS D D16 S 1.036"W TN43036NHS D D18 S 1.042"W TN43042NHS D D20 S 1.748"W TN43048NHS D D23 S 1.760"W TN43060NHS D D25 S 2.8Terrace 2.6 — Hard Surface TilesShipDescription Model Weight Cubes List Price1st Option:Laminate Color:TM33 WhitestoneTM41 BeigestoneWAA3 BlackExample: TN41324NHS.WAA3.P27.PR2.2nd Option:HorizontalPaint Color:See inside frontcover for finishes.P .3rd Option:VerticalPaint Color:See inside frontcover for finishes.For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95Shippable by small-package carrier.132 | Systems Supplement – 3/2013PSGSA SIN 711-1D D Discontinued 2/12/2012D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesCustom Tile Bracket Kits• Tile attachment kit allows for any approved1⁄4" thick “rigid” material to be used as aTerrace tile.• Use supplied dimensions below for tile size.• Must specify both horizontal and verticalpaint color.• When connecting segmented 2.6 to segmented3.4, black (P27) is recommended forhorizontal paint color.Terrace 2.6 — Custom Tile Bracket KitsGSA SIN 711-1For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95TERRACESelect theTerrace 2.6Model Numberfrom above.TN4 .ShipDescription Model Weight Cubes List PriceCustom Tile Bracket Kit for 13"H Tiles20"W TN4CTK20S 1 S 0.1 $ 6324"W TN4CTK24S 1 S 0.1 $ 6330"W TN4CTK30S 1 S 0.1 $ 6836"W TN4CTK36S 1 S 0.1 $ 7342"W TN4CTK42S 1 S 0.1 $ 7548"W TN4CTK48S 2 S 0.1 $ 7860"W TN4CTK60S 2 S 0.1 $ 88Custom Tile Bracket Kit for 26"H Tile20"W TN4CTK20F 1 S 0.1 $ 6324"W TN4CTK24F 1 S 0.1 $ 6330"W TN4CTK30F 1 S 0.1 $ 6736"W TN4CTK36F 1 S 0.1 $ 7242"W TN4CTK42F 1 S 0.1 $ 7448"W TN4CTK48F 2 S 0.1 $ 7760"W TN4CTK60F 2 S 0.1 $ 86Custom Tile Bracket Kit for 30"H Base Tile20"W TN4CTK20B 3 S 0.1 $ 6324"W TN4CTK24B 3 S 0.1 $ 6330"W TN4CTK30B 3 S 0.1 $ 6836"W TN4CTK36B 3 S 0.1 $ 7342"W TN4CTK42B 4 S 0.1 $ 7548"W TN4CTK48B 5 S 0.1 $ 7860"W TN4CTK60B 5 S 0.1 $ 88Custom Material used in the Custom Tile Brackets should be sized according to these dimensions:Standard Tile Actual HeightStandard Tile Actual Width Standard Tile Actual WidthHeightDimensionsWidthDimensionsWidthDimensions13"H 12.910"H20"W 19.481"W42"W 41.481"W26"H 25.910"H24"W 23.481"W48"W 47.481"W30"H 26.050"H30"W 29.481"W60"W 59.481"WThickness of custom material must be1⁄4" thick ±.030".36"W 35.481"WHow to specify —1st Option:HorizontalPaint Color:See inside frontcover for finishes.P .Example: TN4CTK24S.P27.PR22nd Option:VerticalPaint Color:See inside frontcover for finishes.PTN4CTK24S.P27.P27Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 133STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

TilesTerrace 2.6 — Veneer TilesFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEVeneer Tiles• Veneer tiles produced by Gunlocke availablein Cleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• 13"H and 26"H tiles include segment kits(specify paint color) and are for use at beltlineor above.How to specify —Select theTerrace 2.6Model Numberfrom above.Ship Cleargrain Natural 1Description Model Weight Cubes List Price List Price13"H Veneer Tiles (includes segment kit)20"W TN41320V D D3.0 S 0.424"W TN41324V D D4.0 S 0.530"W TN41330V D D4.5 S 0.636"W TN41336V D D6.0 S 0.842"W TN41342V D D6.5 S 0.948"W TN41348V D D8.0 S 1.160"W TN41360V D D9.5 S 1.326"H Veneer Tiles (includes segment kit)20"W TN42620V D D6.0 S 0.824"W TN42624V D D7.0 S 0.930"W TN42630V D D7.5 S 1.136"W TN42636V D D10.0 S 1.442"W TN42642V D D10.5 S 1.648"W TN42648V D D13.0 S 1.960"W TN42660V D D15.5 S 2.030"H Veneer Base Tiles20"W TN43020V D D6.0 S 0.824"W TN43024V D D7.0 S 0.930"W TN43030V D D7.5 S 1.136"W TN43036V D D10.0 S 1.442"W TN43042V D D10.5 S 1.648"W TN43048V D D13.0 S 1.960"W TN43060V D D15.5 S 2.343"H Veneer Base Tiles24"W TN44324V D D10.0 1.330"W TN44330V D D10.5 1.636"W TN44336V D D14.0 2.042"W TN44342V D D14.5 2.348"W TN44348V D D18.0 2.71st Option:VeneerType and Finish:See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1TN4 V . .Example: TN41324V.NE800.P02• Initial base tile must be a 30"H or 43"H tile.Segment bars not included with base tile.• If two or more natural veneer tiles arevertically adjacent, Natural Veneer Tile Setsshould be ordered to carry the grain pattern(see page 136).• Veneer tiles ship with factory-installedattachment clips.• Cannot be used with a double-sided accessmechanism, but may be used opposite a singlesided access mechanism.2nd Option:Paint Color(Segment Kit):See inside frontcover for finishes.GSA SIN 711-1For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95Cleargrain Veneer TileNatural 1 Veneer TileD D Discontinued 2/12/2012S Shippable by small-package carrier.134 | Systems Supplement – 3/2013D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D

TilesTerrace 2.6 — Port TilesVeneer Port Tiles• Veneer Port Tiles by Gunlocke available inCleargrain or Natural 1 veneer.• Cleargrain veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Receptacle openings — 1 in 24"W tiles; 2 inwider tiles.• Includes segment kits (specify paint color).• Port tiles do not support modular datafaceplates.• If two or more natural veneer tiles arevertically adjacent, special Natural VeneerTile Sets should be ordered to carry the grainpattern. See page 136. Call Customer Supportto process special request.For specification details refer to:Working with Tiles, pages 92-94Overview of Tiles, page 95Cleargrain Veneer TileNatural 1 Veneer TileTERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.Ship Cleargrain Natural 1Description Model Weight Cubes List Price List Price13"H Veneer Tiles24"W TN41324VE D3.0 S 0.430"W TN41330VE D3.5 S 0.536"W TN41336VE D4.0 S 0.642"W TN41342VE D4.5 S 0.748"W TN41348VE D5.0 S 0.860"W TN41360VE D6.0 S 1.026"H Veneer Tiles24"W TN42624VE D6.0 S 0.830"W TN42630VE D7.0 S 1.036"W TN42636VE D8.0 S 1.242"W TN42642VE D9.0 S 1.448"W TN42648VE D10.0 S 1.660"W TN42660VE D12.0 S 2.01st Option:VeneerType and Finish:See inside frontcover for finishes.C prefix for CleargrainN prefix for Natural 1TN4 VE . .Example: TN41324VE.NC215.P272nd Option:Paint Color:See inside frontcover for finishes.Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 135SDDDDDDDDDDDDD Discontinued 8/29/2010DDDDDDDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesNatural Veneer Tile Sets for Terrace 2.6• Natural veneer tile sets are used when 2 or more naturalveneer tiles are vertically adjacent to each other on the samepanel (see illustration below) in order to maximize the beautyof real wood and carry the grain pattern from tile to tile.• Tile sets do not apply to Cleargrain tiles, as the grain patternis consistent from tile to tile.13"H NaturalVeneer TileP30"H NaturalVeneer TileSRequires a43"H Tile Set(Set – SP)Does NOTRequire aTile Set43"H NaturalVeneer TileRecommended52"H Tile Set(Set – SQ)26"H NaturalVeneer TileQ30"H NaturalVeneer TileSSpecifying Terrace 2.6 Standard Natural Veneer Tile Sets1. Determine the height of the natural veneer tile set andreference the appropriate page of the pricer:• 26"H and 39"H sets are on page 137• 52"H and 65"H sets are on page 138• 78"H and 91"H sets are on page 139a. To calculate set height simply add the heights of the tiles inthe set (example one 13"H tile and one 30"H tile wouldrequire a 43"H tile set — see illustration above).b. Panel frames and base tiles are inflated by the 4" height ofthe panel base.• A 65"H tile set will fill a 69" panel frame• A 43"H base tile is only 39" high2. Find the column with the desired tile configuration.3. Find the row with the correct tile set width to get theappropriate model logic and pricing.Note1. Tile sets MUST remain together throughout the ordering,manufacturing and installation process in order to maximizethe beauty of real wood and carry the grain pattern verticallyfrom tile to tile.2. The backside of each tile in the tile set is marked with a setnumber so that the tiles comprising that specific set do notget confused with any other natural veneer tile sets.3. The backside of each tile in the tile set with a letter denotingthe placement of each tile in the set. The tile marked A is thetop tile in the set, followed by B, C and so on.Terrace 2.6 — Natural Sets Overview and SpecialsGSA Reference PageSpecifying Terrace 2.6 Special Natural Veneer Tile SetsPricing for special natural veneer sets can be found using thepreviously described standard method. For specificationinformation see below.1. Determine the height of the natural veneer tile set (seeSpecifying Terrace 2.6 Standard Natural Veneer Tile Sets step#1 above) and the width.2. The model number for the set will beTNVS(set height)(set width)-XX. The first option fieldwill be used to show the special configuration of the tiles.• Natural veneer tile set must follow the same tileheight-location restrictions as other 2.6 tiles. Refer toWorking with Tiles on page 94 for tile height-locationrestrictions.Example:TNVS Terrace 2.6 tile veneer set6542 Tiles set height (which is 4" shorter than panelheight) and tile set width, 65"H x 42"W-XX Denotes a special tile configuration.3PQ Tile combination building from the ground up(optioned out) (see illustration below)3. Natural veneer tile sets are specified from the bottom upusing the following logic:PExamples:P13"HTileQ26"HTileS30"HBase TileT43"HBase TileExample: a 43"H base tile under a 13"H tile with a 26" tileat the top would be a 3P (see illustration above).4. Adjacent repeated sizes are replaced with a quantity and thenthe letter denoting the size.a. Example: a 43"H base tile with three 13"H tiles above itwould be a T3P (see illustration above).b. Example: 13"H tile above and below a 26"H tile would bePQP (see illustration above).5. Pricing for special tile sets can be determined by using theprice structure of the completely segmented standard set ofthe same height Terrace 2.6 tiles. (use 4P pricing for 52"H,5P for 65"H, 6P for 78"H, and S5P for 91"H)a. Example: a 78"H x 24"W special set incorporating a43"H base tile with three 13"H tiles above (T3P) would bepriced using the 6P tile set on page 139.b. The example given in a. above would be specified asfollows: TNVS7824-XX.T3P.NC260.Note: For special stains, reference the Special Veneer Policy onpage 8.QPPPTile Set3PQPPPTTile SetT3PQPFabricTile SetPQP136 | Systems Supplement – 3/2013

TilesNatural Veneer Tile Sets• Specified when two or more natural veneertiles are adjacent to carry the vertical grainpattern from tile to tile.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Tile sets without an “S” must be used above anon-veneer base tile. Placement as allowed bythe Terrace 2.6 tile logic table on pricer page94). Sets shown with base cover graphic mustbe used at base of panel.• Sets ship with necessary segment kits.• Please note that 30"H location (A/B) is notsegmentable. A 30"H tile must always beused.Terrace 2.6 — Natural Veneer SetsGSA SIN 711-1For specification details refer to:Natural Sets Overview and Specials, page 136PPTERRACEHow to specify —Select theTerrace 2.6Model Numberfrom above.TNVS – .ShipList PriceDescription Model Weight Cubes 2PNatural Veneer Tile Sets — 26"H20"W TNVS2620– b D D3.3 S 0.524"W TNVS2624– b D D7.0 S 0.930"W TNVS2630– b D D7.5 S 1.136"W TNVS2636– b D D10.0 S 1.442"W TNVS2642– b D D10.5 S 1.648"W TNVS2648– b D D13.0 S 1.960"W TNVS2660– b D D15.5 S 2.3ShipList PriceDescription Model Weight Cubes 3P PQ SPNatural Veneer Tile Sets — 39"H20"W TNVS3920– b D D4.3 S 0.624"W TNVS3924– b D D13.0 S 1.630"W TNVS3930– b D D13.5 S 1.836"W TNVS3936– b D D18.0 S 2.442"W TNVS3942– b D D19.5 S 2.748"W TNVS3948– b D D24.0 S 3.360"W TNVS3960– b D D28.5 S 3.9NOTE: Refer to page 136 for special tile set specification information.1st Option:Tile Set:2P for 26"HSP for 39"H2nd Option:Natural 1 VeneerType and Finish:See inside frontcover for finishes.N .Example: TTVS2624-2P.NC260.P023rd Option:Paint(Segment Kit):See inside frontcover for finishes.D D Discontinued 2/12/2012D Discontinued 8/29/2010S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 137DDDDDDDPPPDDDDDDDQPD DD DD DD DD DD DD DD DD DD DD DD DD DD DPSTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETilesNatural Veneer Tile Sets• Specified when two or more natural veneertiles are adjacent to carry the vertical grainpattern from tile to tile.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 2.6Model Numberfrom above.TNVS – .ShipList PriceDescription Model Weight Cubes 4P S2P D D 2Q SQ D DShipList PriceDescription Model Weight Cubes 5P D D S3P D D SPQ D D TQ D D1st Option:Tile Set:S2P or SQ for52"H5P, S3P, SPQ, orTQ for 65"H2nd Option:Natural 1 VeneerType and Finish:See inside frontcover for finishes.N .Example: TNVS5260-S2P.NE800.P27• Tile sets without an “S” must be used above anon-veneer base tile. Placement as allowed bythe Terrace 2.6 tile logic table on pricer page94). Sets with S (30"H base tile) or T (43"base tile) must be used on full panels or as thebase subset.• Sets ship with necessary segment kits.• Please note that 30"H location (A/B) is notsegmentable. A 30"H tile must always beused.Natural Veneer Tile Sets — 52"H20"W TNVS5220– b D D 16 S 2.224"W TNVS5224– b D D 16 S 2.230"W TNVS5230– b D D 18 S 2.436"W TNVS5236– b D D 24 S 3.242"W TNVS5242– b D D 26 S 3.648"W TNVS5248– b D D 32 S 4.460"W TNVS5260– b D D 38 S 5.2Natural Veneer Tile Sets — 65"H20"W TNVS6520– b D D 20.0 S 2.524"W TNVS6524– b D D 20.0 S 2.530"W TNVS6530– b D D 22.5 S 3.036"W TNVS6536– b D D 30.0 S 4.042"W TNVS6542– b D D 32.5 S 7.548"W TNVS6548– b D D 40.0 S 5.560"W TNVS6560– b D D 47.5 S 6.5NOTE: Refer to page 136 for special tile set specification information.3rd Option:Paint:See inside frontcover for finishes.138 | Systems Supplement – 3/2013PTerrace 2.6 — Natural Veneer SetsGSA SIN 711-1For specification details refer to:Natural Sets Overview and Specials, page 136DDDDDDDD DD DD DD DD DD DD DPPPPPPPPPDDDDDDDDDDDDDDD DD DD DD DD DD DD DPPSPPPSDDDDDDDD DD DD DD DD DD DD DD D Discontinued 2/12/2012D Discontinued 8/29/2010S Shippable by small-package carrier.QQQPSDDDDDDDDDDDDDDD DD DD DD DD DD DD DQSQT

TilesNatural Veneer Tile Sets• Specified when two or more natural veneertiles are adjacent to carry the vertical grainpattern from tile to tile.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theTerrace 2.6Model Numberfrom above.TN – .ShipList PriceDescription Model Weight Cubes 6P S4P S2Q D DShipList PriceDescription Model Weight Cubes S5P SP2Q T2Q1st Option:Tile Set:S2Q for 78"HExample: TN4CTK24SV.P27Terrace 2.6 — Natural Veneer Sets and Segment Kits• Tile sets without an “S” must be used above anon-veneer base tile. Placement as allowed bythe Terrace 2.6 tile logic table on pricer page94). Sets with S (30"H base tile) or T (43"base tile) must be used on full panels or as thebase subset.• Sets ship with necessary segment kits.• Please note that 30"H location (A/B) is notsegmentable. A 30"H tile must always beused.Natural Veneer Tile Sets — 78"H24"W TNVS7824– b D D 24 S 3.030"W TNVS7830– b D D 27 S 3.636"W TNVS7836– b D D 36 S 4.842"W TNVS7842– b D D 39 S 5.448"W TNVS7848– b D D 48 S 6.660"W TNVS7860– b D D 57 S 7.8NOTE: Refer to page 136 for special tile set specification information.Natural Veneer Tile Sets — 91"H24"W TNVS9124 D 24.0 S 3.130"W TNVS9130 D 25.5 S 5.836"W TNVS9136 D 38.0 S 5.242"W TNVS9142 D 40.5 S 6.348"W TNVS9148 D 50.0 S 7.160"W TNVS9160 D 59.5 S 8.5Systems Supplement – 3/2013 allsteeloffice.com | 139PPPPPPPPPPPSGSA SIN 711-1ShipDescription Model Weight Cubes List PriceNatural Veneer Segment Kits (for SPECIAL tile sets only)20"W TN4CTK20SV D D 1.0 S 0.124"W TN4CTK24SV D D 1.0 S 0.130"W TN4CTK30SV D D 1.5 S 0.136"W TN4CTK36SV D D 2.0 S 0.242"W TN4CTK42SV D D 2.5 S 0.248"W TN4CTK48SV D D 3.0 S 0.360"W TN4CTK60SV D D 3.5 S 0.32nd Option:Natural 1 VeneerType and Finish:See inside frontcover for finishes..3rd Option:Paint(Segment Kit):See inside frontcover for finishes.PFor specification details refer to:Natural Sets Overview and Specials, page 136DDDDDDDDDDDDDDDDDDDDDDDDD D Discontinued 2/12/2012D Discontinued 8/29/2010S Shippable by small-package carrier.PPPPSQQPSD DD DD DD DD DD DDDDDDDD DD DD DD DD DD DD DQQSQQTTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & DataFlexconnect Electrical SystemGreater flexibility. More choices in circuit design.Easier to install.FeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitLay-in top channel and base pathway of data cablingare standard in every Terrace panel.Lay-in capability makes installation easier and faster.Cabling can be routed continuously throughout thefacility.8-wire, 20 amp electrical system can be specified inone of four ways:• One dedicated circuit plus three common circuitssharing a 10-gauge neutral wire.• Two circuits sharing one neutral wire plus twoother circuits sharing a separate 10-gauge neutralwire.• Three circuits, each having their own neutral wire.• Eight circuits, two four circuit systems providedback-to-back.Satisfies requirements for computer support. End userhas choices in electrical power distribution.Choice of colors for snap-in receptacles.Receptacles coordinate visually with panel trim formore consistent aesthetics.Power harnesses utilize flexible metal conduit that isapproved by UL as a separate pathway.Voice and data cables may be routed in proximity toelectrical system while meeting separationrequirements.Inventory management and installation aresimplified.Power harnesses are mounted at upper level of basepathway.Allows voice and data cables to be laid in easily atbottom of pathway without extra fastening.Internal vertical wire management comes standard inevery Terrace panel (except door and glazed).Internal wire pathways manage wires out of sight toaccess point, ensuring all wires are enclosed and fullyprotected.FeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitWorking with Terrace ® 3.4/2.6 ElectricalGSA Reference PageIn the Terrace 3.4 system, electrical outlets can beaccessed directly by use of hinge kits, Beltline AccessMechanisms, or through ports in individual tiles.End-user can choose between clean, uninterruptedvisual design, or quick, easy access to outlets.Pass-thru harnesses feature receptacle mountingblock.Lowers the cost of routing power where power accessis not required. Two duplexes can be added at anytime if needed.Retractable power and data centers pop up throughworksurface grommet.Power and data centers provide flexible access atworksurface height, without marking or changingeither worksurfaces or panel inserts.Power in-feeds are non-handed.Non-handed in-feeds simplify specification,installation, and reconfiguration.Positive toolless attachment.Connection between power harnesses and pass-thrusis quick and easy, saving installation time.Electrical from base to top in Terrace 3.4 panels.Terrace 3.4 can accommodate our 3-mode electricalsystem at base pathway, and also at any levelequipped with a segment kit (excluding the 13"Hsegment directly above the baserail). Also, cannot beplaced in bottom 13" segment of stack-on frames.This means an 82"H panel can accommodate asmany as 24 duplex receptacles, amounting to 48individual outlets.Terrace 2.6 can accommodate our 3-mode electricalsystem at base pathway. Terrace 2.6 69"H panel canaccommodate 8 duplex receptacles and mounting for16 individual outlets.140 | Systems Supplement – 3/2013

Electrical & DataWorking with Terrace ® 3.4/2.6 DataAMP ® NETCONNECT ® SystemFeatureBenefitMoves cabling contact from telecommunicationscloset to consolidation points in the office.Allows workstation clusters to be reconfiguredwithout requiring all cables to be re-routed, savingconsiderable time and cost. Reconfiguration can beorganized around the Consolidation Point with nointerference to adjacent zones.FeatureBenefitGSA Reference PageAMP NETCONNECT components meet TIA / EIAstandards for CAT 5E, CAT 6 and fiber-optic cabling,and is backed by a 25-year AMP NETCONNECTPerformance Limited Warranty.The assurance that your installation will performover time.TERRACEFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitAll cabling from the Consolidation Point box to theworkstation is re-configurable and requires no specialtools or training.Significant cost savings over time as compared totraditional wiring, which is generally discarded aftera single reconfiguration. It is often not necessary toschedule appointments with outside contractors, orto tie up scarce internal resources.Cables are color-coded in 10', 30' and 50' lengthsand feature label tags.Helps to keep track of cable locations and identities.Allsteel and AMP have a strategic partnershipto provide the highest quality service andcomponents — through support and development.AMP is one of the world’s largest connectormanufacturers and a leading supplier of voice, dataand power systems.Manufactured by AMP — one of the world’s largestproducers of voice and data transmission cabling,and the single largest producer of connectors.The confidence that all components are produced byan industry leader.Feature Internal Consolidation Point box for Terrace 3.4.Benefit Clean, external appearance.Feature Lockable consolidation point box for Terrace 2.6mounts in the slotted standards on the surface of theTerrace panel. Cables can be lain in and portedthrough the base pathway.Benefit Security is provided.FeatureBenefitFeatureBenefitTerrace 3.4 Data Faceplate Adapters connect toframes with mounting brackets.Allows you to remove tiles or kickplates withoutdisturbing cables.Terrace panels and connectors support 90-degreebend radii requirements for CAT 5E, CAT 6 orfiber-optic cabling.Terrace supports the most up-to-date standards fordata and communications cabling.TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 141

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & DataTerrace 3.4 features an exceptionally high capacity for cablemanagement, including electrical, voice and data capabilities.The 8-wire electrical system can be integrated at base pathway,and at 13" vertical intervals above the base pathway wherethere is a horizontal member. The open structure of the frameallows voice and data cables to be routed both vertically andhorizon tally at virtually any point in the panel.Cable openings inframe uprightspermit cables tobe run betweenframes.Electrical pass-thruharnesses havecapacity for oneface-up(concealed) duplexreceptacle, or oneduplex receptacleper panel sidewhen mounted inexposedapplication.Power blockssnap intohorizontal framemembers.Base pathwayaccommodates powerand lay-in capacity fordata andcommunication.Capacity for lay-incabling is providedunderneath paneltop caps.Data faceplatescan be mounted invacant receptacleopenings.Electrical power harnesses havecapacity for 2 (1 in a 24"W panel)per panel side when mounted inexposed application.Beltline accessis accomplishedvia Tile Hinge Kitor Beltline CableAccess Mechanism.Electrical powerharness acceptsup to 2 duplexrecepta cles perpanel side (24"Wlimited to 1) atbase pathway.Working with Terrace ® 3.4 Electrical & DataGSA Reference PageIntegrated Power Poleaccommodates powerin-feed andcommunication/data lines.Data faceplates canbe mounted in eitherside of the beltlinearea.Jumper can connectbase pathway powerto beltline.Fiber optic cablescan follow 90°turns at theintersection ofpanel runs.Ceiling in-feedconnects to buildingelectrical supply.Wire managers canattach to horizontalframe members tomanage cabling.Optional Segment Kits andelectrical brackets allowselectrical distribution every13 vertical inches.Data cabling can lay in thechannel of horizontal framemembers or be routedvertically through themembers.Data faceplate adaptorscon nect to crossmembers with datamounting brackets.Beltline areaaccommodates powerand data orcommunication lines.Base pathway powerin-feed mounts into anyreceptacle position in thebase pathway area and isconnected to the buildingelectrical supply.Fiber optic and other datacabling can be routedthrough 90° intersections.Electrical powerharness accepts upto 2 duplexreceptacles (24"Wlimited to 1) whenfacing upward andconcealed betweentiles at beltline ineach panel.142 | Systems Supplement – 3/2013

Electrical & DataTerrace 2.6 features high capacity for cable management,including electrical, voice and data capabilities. The 8-wireelectrical system can be integrated at base pathway and beltline.The open structure of the frame allows voice and data cables tobe routed both vertically and horizon tally.Working with Terrace ® 2.6 Electrical & DataGSA Reference PageIntegrated Power Poleaccommodates powerin-feed andcommunication/data lines.Ceiling in-feedconnects to buildingelectrical supply.TERRACECable openings inframe uprightspermit cables tobe run betweenframes.Power blockssnap intohorizontal framemembers.Base pathwayaccommodatespower and lay-incapacity for dataand communication.Capacity for lay-incabling is providedunderneath paneltop caps.Electricalpass-thruharnesses havecapacity for oneduplexreceptacle perpanel side.Electrical power harnesses havecapacity for 2 (1 in a 24"W panel)per panel side when mounted inexposed application.Electrical powerharness acceptsup to 2 duplexrecepta cles perpanel side (24"Wlimited to 1) atbase pathway.Fiber optic cablescan follow 90°turns at theintersection ofpanel runs.Jumper can connectbase pathwaypower to beltline.Fiber optic and other datacabling can be routed through90° intersections.Beltline areaaccommodatespower and dataor communicationlines.Electrical powerharness acceptsup to 2 duplexreceptacles perpanel side (24"Wlimited to 1).Base pathway powerin-feed mounts into anyreceptacle position in thebase pathway area and isconnected to the buildingelectrical supply.TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 143

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & DataThe Terrace electricalsystemsTerrace offers a choice of fourelectrical systems:• Four-circuit, 3 + 1• Four-circuit, 2 + 2• Three-circuit, separateneutrals• Eight circuits; twofour-circuit systemsprovided back-to-back.All four systems utilize an8-wire electrical system, ratedat 20 amps per circuit (15amps Canadian). See pages150-151 for a detailedexplanation of each electricalsystem.Terrace panels and electricalcomponents are UL Listed.Electrical components are alsoCSA certified.Installation and use of theelectrical system, the numberof recep tacles used on a givencircuit and connections to thebuilding power supply shouldbe in compliance with all localand national electrical codes.NOTE: All Terrace 3.4 tileswhere receptacles areconcealed MUST BEEQUIPPED with tile hinge kitson both sides of panel.Caution: Electricalequipment cords orextension cords MUST NOTBE ROUTED through cableopenings in frame sides.In-feedsPower in-feed cables deliverpower from building to system.In-feed cables are housed inconduit to separate electricalsystem from communicationsand data lines.Integrated power andcommu ni cations polesprovide capacity for routingpower supply directly throughthe top of any structural orstacking frame using samewidth trim/ connector kit inplace of top cap. Avoid glassor translucent tiles in upperposition of frames withintegrated power poles. Powerpole has a cavity on each sideof a center septum. Whenusing a ceiling power in-feed,consider that the in-feed mustconnect into an electricalharness located in an adjacentpanel. (See page 147-148 forcable capacity.)Working with Terrace ® 3.4/2.6 Electrical & DataGSA Reference PageSealtight base pathwaypower in-feed attaches to areceptacle opening at the basepathway. A heavy rubbersheathing shields conduit,allowing in-feed to beexposed.Hardwire (New York Code)junction box (model 871400)is used when local electricalcodes require hardwire entry.When used in 24"W, 30"Wand 36"W panels, power canbe routed only in onedirection. When used in 42",48"W and 60"W panels, anelectrical pass-thru cable orharness for that panel widthcan be used to route powerback in the oppo site direction.Unit must connect to a poweror pass-thru harnesspositioned in the basepathway area of an adjacentpanel. Customer to furnish allcabling and wiring frompower entry to power source.Junction box can bepositioned at any duplexreceptacle location.Hardwire (Chicago Code)Wiring harnesses and snapconnectors are not allowed inChicago — base pathwaysmust be comprised of allmetallic compo nents. InTerrace 3.4 use J-box metalmounting bracket (model878006) for concealedmounting 2" x 4"customer-supplied J-boxes inthe beltline. Concealedmounting is the only option atbeltline. For the base pathway,junction box (model 874500,873550) clips directly intorecep tacle locations. With theaddition of a beltline filler kit(model 8988BLF) on Terrace2.6, the junction box can bemounted at beltline. Thejunction box (873550) can besingle or double sided in theTerrace 2.6 base and singlesided at beltline. Customermust furnish conduit, wiring,standard duplex receptacleswith metal covers for thebeltline and designer-typereceptacles for the basepathway. Power entry can berouted from the ceiling, via aTerrace power pole, or fromthe floor into a junction box(model 873550).Ceiling power in-feedconnects to a prewiredelectrical harness in the belt lineTerrace 3.4 shownor base pathway, traversesthrough an adjacent panel andterminates in the junction boxat the top of the integratedpower pole. For use withintegrated power pole models870343 and 870369. Noportion of the flex cable can beexposed after installation.144 | Systems Supplement – 3/2013

Electrical & DataPowerPower blocks on electricalpower harness and pass-thruharness accept duplexreceptacles.Electrical power harnessesare used to distribute power inpanels with Terrace 3.4,harnesses can be mounted atthe base pathway and at 13"vertical intervals above thebase pathway using mountingbrackets or power blockbeltline mounting brackets.Specify harness length tomatch panel width. 24" powerhar nesses accept one duplexwhen concealed at positionsabove the base pathway, orone recep tacle on each side ofthe harness when exposed. Allother power har nesses havepower blocks to accept twoduplex receptacles whenconcealed at positions abovethe base pathway, or fourduplex receptacles (two oneach side of panel) whenexposed at base pathway orany other position. Terrace 2.6electrical can be located atbase pathway or beltline only.Connectors at both ends ofpower harnesses allow powerdistri bu tion in either direction.Electrical pass-thruharnesses have capacity tohandle one duplex receptaclewhen concealed at positionsabove the base pathway withTerrace 3.4, or one on eachside of the panel whenexposed.Electrical pass-thru cablesdistribute power through anypanel where receptacles arenot required. Cable lengthcannot be stretched.Electrical jumper cablesconnect power from basepathway or beltline to aharness located on anyhorizontal member as needed.Jumper cable plugs into powerblock end of electrical powerharness or electrical pass-thruharness.Model 871366 is 66" tojumper up to 30 inchesvertically – base pathway tobeltline, beltline to basepathway, or up to 30" aboveor below beltline whenconnected to beltline electrical.Model 8713108 is 106" tojumper up to 69" vertically –from baserail up to the highest13" opening on an 82"Hframe.Requiresminimumof onepowerharness.Requiresminimum oftwo powerharnesses.Use of a ceiling in-feed or jumperat this location requires anadditional power harness.All electrical powerharnesses and pass-thruharnesses will stretch 3 1 ⁄2",allowing them to span “T”,“X” and “A” inter sectionsand “S” extended straightconnections.Working with Terrace ® 3.4/2.6 Electrical & DataGSA Reference PagePower BlocksBase pathway mounting:Power blocks snap directlyonto brackets in base pathwayarea.Beltline mounting: In Terrace3.4 power blocks can faceupward allowing receptaclesto be concealed within thebeltline area.To conceal receptacles inTerrace 3.4, mount powerblocks onto Power BlockBeltline Mounting Bracketswhich snap into the panelframes (shown above).For exposed receptacles atbeltline with Terrace 3.4 or2.6 mount power blocks ontoElectrical Mounting Bracketswhich screw into the panelframe or segment kit.(Mounting brackets soldseparately.) Data/ElectricalPort Tiles must be used whereexposed receptacles will belocated.Note: In Terrace 3.4, whenpower blocks face upward, themaximum quantity ofreceptacles that can beinstalled is reduced by onehalfcompared to facingoutward or at the basepathway.ReceptaclesDuplex receptacles snap intopower blocks of powerharnesses or pass-throughharnesses. Duplexes areavailable in multiple colors.Each receptacle is labeled toindicate which circuit it will beconnected to.When duplex receptacles areconcealed within Terrace 3.4tiles, tiles are required to beattached via tile hinge kits.Pull-up receptacle mounts inworksurface grommet holes,providing three receptacles tothe worksurface. Inte gral15 amp circuit breaker isincluded. Pull up receptaclesmay inter fere with theplacement of pedestals.Power/Data Dome mounts inworksurface grommet holes orinto field-cut, 2 1 ⁄4" diameterhole. Unit has two receptaclesto the worksurface plus dataports. Many of the AMP,AT&T, Krone, Leviton andmost commercial dataterminals can be used. Dataterminals must be of a designthat will snap into .695 x .650,.590 x .790 or .590 x .750openings in .064 maximumthick faceplate. Do not mountin front of hinged tile atbeltline.Systems Supplement – 3/2013 allsteeloffice.com | 145TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & DataLightingTask lights can be recessedunder storage cabinets orstorage shelves, panel-hung,or freestanding.Three styles of recessed tasklights in four sizes areavailable to correspond tocabinet or shelf width. Theyhave 9' power cords in black,con nected in the right rearcorner. All models featureelectronic ballast for longerbulb life and cooler operatingtemperature. Task lights witha fused plug to meet Chicagoelectrical code are alsoavailable.Recommendation: Providea separate circuit for tasklights for proper long-termoperation without RFinterference to computers thatmay be in use.Voice/Data ReceptaclesTerrace not only providesspace for large volumes ofvoice and data cables, it alsooffers several means of mount -ing commercially availablevoice and data components.Commer cially availablemodular data faceplates canbe mounted in the sides of thepanel frame, can be used invacant base receptacleopenings or can be mountedin data/electrical port tilesabove or below theworksurface.Working with Terrace ® 3.4/2.6 Electrical & DataGSA Reference PageCablingCable organizers are made ofrigid polymer, and hang fromthe horizontal cross members.Cables can be placed into theextensions of the organizers tokeep cables aligned as theypass through the panel frame.Commercially availabletie-wraps can also be used tostrap cables to the organizerextensions. (Organizers areordered separately.)Wire managers have aself-adhe sive backing thatsticks to underside ofworksurface. Flexible stripsallow cabling to enter/exit andcan be contained inside the2-cavity profile.AMP ® NETCONNECT ®modular cabling systemprovides quick and convenientdata switching forworkstation reconfigurations.Internal consolidation box(ordered separately andavailable for Terrace 3.4 only)can be located in the lowerarea of any 30"–60"W panelframe or in the upper positionof 69"H or 82"H x30"–36"W panel frames tomaintain a clean Terraceexternal appearance.External Consolidation Boxavailable also for use on bothTerrace 2.6 and 3.4.146 | Systems Supplement – 3/2013

Electrical & DataLay-in Cable CapacityBase Pathway Receptacle LocationsThe top and base pathwayallow continuous voice anddata lines to run through andbetween panels withoutinterruption. Lay-in is providedfor environ ments wheresystems furniture or cabling aresubject to frequent change.Terrace 3.4End View13 cablesTerrace 2.6End View8 cablesTerrace 3.4 Top pathwayaccepts up to 13 voice/datacables (.25" dia). Terrace 2.6Top pathway accepts up to 8.Terrace 3.4Top View6 cablesTerrace 2.6Top View3 cablesTerrace 3.4 Variable heightjunctions accept up to 6voice/data cables (.25" dia.)with a bend radius ofapproximately 1 ⁄2" to 3 ⁄4".Terrace 2.6 accepts up to 3.Terrace 3.485 cablesTerrace 2.674 cablesTerrace 3.4 base pathwayaccepts up to 85 (6.95 sq. in.)voice/data cables (.25" dia.)when electrical system islocated in beltline pathway.Terrace 2.6 accepts up to 74(6.03 sq. in.) at 60% fill.Working with Terrace ® 3.4/2.6 Electrical & DataGSA Reference PageCircuit UsageStrategy 1Circuits to EquipmentAssign specific uses for each ofthe circuits:• For example, in afour-circuit system:Circuit 1 — Calculators,fans, etc.Circuit 2 — Task lights(could be wired to wallswitch)Circuit 3 — CRT or flatscreen monitorsCircuit 4 — CPUsStrategy 2Circuits to WorkstationsAssign specific workstations toeach of the three availablecircuits. Use circuit 4 forpower-sensitive electronicequipment.Placement of pedestals and lateral files may render someduplex locations inaccessible. Pedestal placement may also affectcom patibility with pull-up receptacles.Terrace 3.432 cablesTerrace 2.627 cablesWhen electrical systemshares base pathway, thecable capa city in Terrace 3.4is reduced to 32 (2.6 sq. in.)voice/data cables (.25" dia.) InTerrace 2.6 it is reduced to 27cables (2.25 sq. in.). Cablequantities listed are at 60% fillratio.Terrace 3.487 cablesTerrace 2.670 cablesCable capacity of theTerrace 3.4 power pole, inaddition to electrical in-feed, is3.26 sq. in. on one side and3.9 sq. in. on the other for atotal capacity of 87 cables of.25" diameter.Cable capacity of theTerrace 2.6 power pole, inaddition to electrical in-feed is2.79 sq. in. on one side and2.91 sq. in. on the other for atotal capacity of 69 cables of.25" diameter.TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 147

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & DataTerrace 3.4String-in CapacityOpenings in frame sidespermit data andcommunication cables to berun between frames at up tofive levels in Terrace 3.4.Using tackable acoustical tiles,each opening accom modatesup to 61 cables (.25" dia) andthe beltline pathwayaccommo dates 82 cables withelectrical componentsinstalled.Terrace 2.6String-in CapacityOpenings in frame sidespermit data andcommunication cables to berun between frames in Terrace2.6. Using tackable acousticaltiles, the beltline pathwayaccom modates up to 62 cables(.25" dia) or 46 cables withelectrical componentsinstalled.DO NOT run electricalequipment or extensioncords through cableopenings in frame sides.Use beltline orbase-mounted electri calsystem for all electricalsupply.Vertical CapacityVertical Capacity Through panel FramesTerrace 2.6Horizontal Capacity of Terrace 3.4 FramesTerrace 3.4 4"Panel Qty. of .25" Cables Qty. of .25" Cables Total SpaceWidth at 40% Fill Ratio at 60% Fill Ratio (sq. in.)Terrace 3.4 24" and 30"W 61 92 7.54Terrace 3.4 36" – 60"W 85 128 10.45Terrace 2.6 24" – 60"W 42 64 5.26Working with Terrace ® 3.4/2.6 Electrical & DataGSA Reference PageNOTE: Routing cables through panels with super acoustical tiles requiresposi tioning of cables and tie-wraps to prevent interference with the fiberglasson the back side of the tiles.Horizontal Capacity of Terrace 2.6 Frames*13⁄16"3 1 ⁄8"3 1 ⁄8"8 1 ⁄4"*46 cables with electrical installedat beltline. 62 cables withoutelectrical installed at beltline.See Detail69" 56" 43"3"1".830"Cables can enter/exit panelthrough underside of basepath way at juncture betweenframes. Open ings are sized asfollows (in sq. in.):Terrace System 3.4 2.6Straightconnection 5.8 6.0“S” ExtendedStraightConnection 12.9 10.0“L” 90°Connection 11.5 8.9“T” Connection 20.5 15.9“X” Connection 23.1 17.9“A” Connection — —“Y” Connection — —When leveling glides arefully retracted, panel-to-floorclearance is 7 ⁄16". This mayaffect the volume of cablingthat can be fed into the framefrom the bottom of thepathway.• A 60% fill ratio isachievable; however, whenelectrical components areinstalled in the beltline area,cabling capacity through thebeltline area will be limitedto approximately 45% fillratio.148 | Systems Supplement – 3/2013

NotesTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 149

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & DataTo Order:1. Determine which electrical system you willuse after consulting your electrician andcomputer support personnel:• The Four-circuit system(4-Hot/2-Neutral/2-Ground)– 3 + 1 option– 2 + 2 option• The Three-circuit system(3-Hot/3-Neutral/2-Ground)• The Eight-circuit system (back-to-backfour-circuit systems)Flexconnect Electrical System OptionsThe four-circuit, eight-wire electrical system is widely specified andtrusted by hundreds of thousands of end-users. This proven systemdelivers four circuits for every power infeed in either a 3 + 1 or 2 + 2configuration. The isolated/dedicated circuits are ideal for sensitivecomputing equipment, while the common circuits are suitable for faxes,copiers, task lights and other peripherals. Both the 3 + 1 and 2 + 2systems use the same pre-wired components, making it easy to adjust aselectrical needs change.Four-circuit, 3 + 1 Receptacle OptionFour-circuit, 2 + 2 Receptacle Option2. Determine location, quantity and circuit ofduplexes.3. Determine the appropriate choice and use ofIsolated, Isolated/Dedicated and SeparateNeutrals circuits.4. Specify appropriate Power Harnesses* andPass-Thru Cables.*5. Determine the location, quantity and type ofPower In-feed needed.Working with Terrace ® 3.4/2.6 ElectricalGSA Reference Page* Select Power Harness models (8712XX),Pass-Thru Cables (8710XX) and Pass-ThruHarness (8711XX) with the last two digitscorresponding with the panel width intowhich the component is to be positioned.The initial cable length can be stretchedapproximately 3" to transverse TEE, CROSS,ELL and Extended Straight Connectors.You can also choose a three-circuit, eight-wire system that has adedicated neutral for every hot circuit. The three-circuit componentshave model numbers with an “A” suffix and appear in a gray box in thispricer.The 3 + 1 option is the electrical standard used on Allsteel systemsfor many years in most installations. This wiring option providesthree utility circuits plus an isolated/dedicated circuit for moresensitive equipment. Circuit 2 (one of the 3 common circuitssharing a neutral wire) cannot be used with single-phase buildingelectrical supply.DUPLEX RECEPTACLEGRAYWHITEGRN/YLWGREENPINKBLUEREDBLACKDUPLEX RECEPTACLEGRAYWHITEGRN/YLWGREENPINKBLUEREDBLACKNEUTRAL - 2NEUTRAL - 1ISOLATEDGROUNDHOT - 4HOT - 3HOT - 2HOT - 1NEUTRAL - 2NEUTRAL - 1ISOLATEDGROUNDHOT - 4HOT - 3HOT - 2HOT - 1CIRCUIT 1CIRCUIT 1CIRCUIT 2 CIRCUIT 3CIRCUIT 2CIRCUIT 3ISOLATEDCIRCUIT 4ISOLATED/DEDICATEDThe 2 + 2 option is a wiring option that provides two utilitycircuits and two isolated circuits for more extensive computerusage applications.CIRCUIT 4ISOLATED12 GA10 GA12 GA12 GA12 GA12 GA12 GA12 GA12 GA10 GA12 GA12 GA12 GA12 GA12 GA12 GA150 | Systems Supplement – 3/2013

Electrical & DataWorking with Terrace ® 3.4/2.6 ElectricalGSA Reference PageTERRACEThree-circuit, separate neutralsTerrace System Receptacle UsageElectrical SystemFour-circuit4-Hot/2-Neutral/2-GroundThree-circuit3-Hot/3-Neutral/2-GroundTwo 8-wire, 20 amp (15 amp Canadian) electrical systems are offeredCircuitry3 + 12 + 2w/separateneutralsCommonCircuit-1874501 (3.4)873501 (2.6)CommonCircuit-1874501 (3.4)873501 (2.6)CommonCircuit-1874501A (3.4)871501A (2.6)Receptacle CapacityCommonCircuit-2 (1)874502 (3.4)873502 (2.6)CommonCircuit-2874502 (3.4)873502 (2.6)CommonCircuit-2874502A (3.4)871502A (2.6)Typical power usage by the most commonly specified office equipment.The Three-circuit, separate neutrals configuration is a wiringoption that provides separate neutrals for each of the three circuits.Two circuits share a common ground, and one circuit isisolated/dedicated. The three-circuit components have modelnumbers with an “A” suffix.CommonCircuit-3874503 (3.4)873503 (2.6)IsolatedCircuit-3874506 (3.4)873506 (2.6)Iso/DedicatedCircuit-3874503A (3.4)871503A (2.6)DUPLEX RECEPTACLEWHITEGRAYWHT/GRYGREENGRN/YLWBLACKREDBLUEIso/DedicatedCircuit-4874504 (3.4)873504 (2.6)IsolatedCircuit-4874504 (3.4)873504 (2.6)(1) Circuit 2 (one of the 3 common circuits sharing a neutral wire) cannot be used with a single-phase buildingelectrical supply.NEUTRAL - 1NEUTRAL - 2NEUTRAL - 3GROUNDISOLATED GRD.HOT - 1HOT - 2HOT - 3CIRCUIT 1EQUIPMENTAMPS EQUIPMENTAMPS EQUIPMENTAMPSComputersCopiersFax MachinesPersonal Computer ..........................3Notebook Computer........................3Monitors13" Color Monitor ..........................217" Color Monitor ..........................321" Color Monitor ..........................415" Plasma Monitor .....................0.520" Plasma Monitor ........................1Desktop Copier .............................15Console Copier .............................20Copier/Duplicator ..........................30PrintersInkJet.................................less than 1Personal Laser or LED .....................8Workgroup Laser or LED ..............15InkJet Fax..........................less than 1Plain paper Fax................................8Task Lights30" T5 Fluorescent ............0.12/bulb60" T5 Fluorescent ............0.24/bulbSource: Industry Analysis, Inc., Rochester, NYN/ACIRCUIT 2CIRCUIT 3ISOLATED/DEDICATED12 GA12 GA12 GA12 GA12 GA12 GA12 GA12 GANotes:• Four-circuit components and three-circuitcomponents (with suffix “A”) cannot beused together.• Components of the two systems arekeyed differently to prevent componentsof one system being connected tocomponents of another system.• Allsteel Model Numbers are printed onthe UL labels, and components are colorcodedto provide visual identification ofthe different components.• Four-circuit components have blackplastic parts.• Three-circuit components have rustcoloredterminal ends and receptaclebacks are rust colored.Duplex Receptacles15 amp Receptacle20 amp Receptacle(Required by somelarge copiers.)TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 151

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & DataAllsteel/AMP ® NETCONNECT ® Modular CablingFurniture and cabling work together...for a change.Allsteel systems furniture and AMP NETCONNECTModular Cabling offer a new level of flexibility that canaccelerate the rate at which your organization respondsto change.AMP NETCONNECT Modular Cabling uses a ZoneDistribution strategy for voice and data cabling. With everychange in office layout, traditional cabling strategies requirethe installation team to run continuous cables from thetelecommunications closet to each workstation. All wiresmust be re-terminated by hand at each workstation, andmost existing cabling is discarded in the process. ZoneDistribution moves the interface for voice and data cablesfrom the telecommunications closet to one or moreConsolidation Points on the office floor, greatly simplifyingmoves, adds and changes. Reconnection becomes a matterof “plug and play”. Virtually all the cabling can be re-usedtime and again. By some estimates, Zone Distribution canreduce the costs for re-wiring an individual workstation byas much as 90%.How the system works.1. The cabling installation team routes the originatingcables from the telecommunications closet to theConsolidation Point. Consolidation Points can bestrategically located to support functional teams or meetthe physical requirements of the building.2. The cabling installation team punches down the primarycables into the back of the 6-port modular jack modules.AMP pre-terminated cables are then routed to individualworkstations in color-coded 10-, 30- or 50-foot lengthsas required. The cabling installer then links individualworkstations to the Consolidation Point, performsnecessary tests, and labels each cord.3. Subsequent moves, adds and changes can be handled bythe furniture installation crew, or even by the workersthemselves.Working with Terrace ® 3.4/2.6 DataHow AMP NETCONNECT components and Allsteel furniture systems support moves,adds and changes.• Moves. To relocate an employeewithin the work zone, all that isneeded is to disconnect theappropriate voice and data cablesat the Consolidation Point or theworkstation. Convenient tags makeit easy to identify the cables.Reconnection takes only seconds.• Adds. Multiple workstations can belinked to the Consolidation Point inminutes. If the expansion requiresmore capacity, additional cables canbe run from the closet to theConsolidation Point withoutdisrupting the workflow in adjacentzones or workstations.GSA Reference PageFrom closet to consolidationbox.The mounting rail for eachConsolidation Point box features45 degrees of rotation. This placesall termination points in plain viewand within easy reach. Internal cordmanagement reels allow you tostore excess cord to supportchanges or possible moves.From Consolidationbox to the workstation.Cables fasten conveniently intothe 6-port modular jacks. OnTerrace, connections are housed inan internally mountedconsolidation box. Circuitidentification tags make it easy tolocate the proper cable formaintenance or reconfiguration.The open frame structure of Terracemakes it easy to keep a multitude ofcables organized within the panel.From the workstationto the equipment.Cable ports accommodate up tofour individual voice and dataoutlets mounted under access tilesrouted directly through the surfacetile on Terrace.• Changes. Reconfiguration can beorganized around the ConsolidationPoint with no interference to adjacentzones. When the new work area isestablished, cables are easily routedthroughout open panel frames oralong lay-in channels.152 | Systems Supplement – 3/2013

Electrical & DataAllsteel/AMP ® NETCONNECT ® Modular CablingTerrace Consolidation Point Box• Reliability. AMP is one of the world’s leading suppliers ofvoice, data and power systems, and is the world’s largestconnector manufacturer. AMP NETCONNECT componentsmeet TIA / EIA standards for CAT 5E, CAT 6 andFiber-optic cabling, and are backed by a 25-year AMPNETCONNECT Performance Warranty.• Fidelity. Unlike some “daisy chain” solutions, whichrequire individual connections at every panel, AMPNETCONNECT components incorporate only ONEconnection point between the communications closet and theworkstation. The integrity of the signal is preserved withoutcompromise.• Convenience. All punch-down terminations are situated atthe Consolidation Point. From there to the workstation,moves, adds and changes are a simple matter of “plug andplay”. In addition, Terrace panels with their open internalstructure, allow plenty of room to organize and store excesscable, making future changes even easier.Working with Terrace ® 3.4/2.6 DataGSA Reference PageInternal mounting (Terrace 3.4 only): Consolidation Point Box can be mounted directly insideTerrace panel frames — in the lower portion of all 30-60"W frames and/or in the upper area(where no segment kits are positioned) in 69"H or 82"H by 30-60"W frames. Each box canaccommodate up to four punch-down modules, thus providing up to 24 individual terminationpoints, servicing between 4 and 12 individuals. All cables fit easily and neatly within Terracepanels. The lower cover protects the more sensitive hand-terminated points. The upper coverremoves easily, revealing the “plug and play” connections. Position box in location where apanel tile can be removed to access the exposed side of the unit.TAMCCBTTerrace 3.4 Internal Consolidation Point Box. Wires not included (19"H x 19"W x 1 7 ⁄8" thick). Black only.Comes with modular databox, two covers and attachment hardware.External mounting (Terrace 3.4 and 2.6): Consolidation points mount in the slotted standardson the surface of the 30", 36" and 42" wide Terrace panels. Each lockable enclosureaccommodates up to 24 termination points, serving between four and 12 individuals.TAMCCB6Terrace External Consolidation Point Box (specify color). Wires not included. Comes with modulardatabox, two covers and attachment hardware.Advantages of using AMP NETCONNECT components with Allsteel Systems Furniture.• Cost Savings. While the initial installation involves asomewhat higher investment, the real cost of cabling has tobe considered over time. AMP NETCONNECT componentsgenerally pay for themselves at the first reconfiguration.From then on, the savings just keep adding up.• Control. No more waiting to schedule appointments withoutside contractors, or tying up scarce internal resources.AMP NETCONNECT puts you in control of thereconfiguration process. Since all cables from theconsolidation box to the workstation are re-usable, there isless waste to dispose of or recycle.AMP NETCONNECT components meet TIA/EIA standards for CAT 5E, CAT 6 and Fiber-optic and are backed by the AMP 25-year Performance Warranty.TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 153

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & Data Electrical Components — Terrace ® 3.4/2.6How to specify —Select theModel Numberfrom above.871Four-circuit Three-circuit3 + 1 Separate Ship ListDescription 2 + 2 Neutrals Weight Cubes PriceElectrical Power HarnessesFor 24"W Frames 871224 871224A 2.0 S 0.5 $ 198For 30"W Frames 871230 871230A 2.0 S 0.5 $ 198For 36"W Frames 871236* 871236A 2.5 S 0.5 $ 198For 42"W Frames 871242* 871242A 3.0 S 0.5 $ 211For 48"W Frames 871248* 871248A 3.0 S 0.5 $ 211For 60"W Frames 871260* 871260A 3.0 S 0.5 $ 211Electrical Pass-Thru Harnesses with Power BlockFor 24"W Frames 871124 871124A 2.0 S 0.5 $ 123For 30"W Frames 871130 871130A 2.0 S 0.5 $ 123For 36"W Frames 871136* 871136A 2.0 S 0.5 $ 123For 42"W Frames 871142* 871142A 2.5 S 0.5 $ 129For 48"W Frames 871148* 871148A 2.5 S 0.5 $ 129For 60"W Frames 871160* 871160A 3.0 S 0.5 $ 129For 72"W Frame Runs 871172 871172A 4.0 S 0.5 $ 174For 96"W Frame Runs 871196 871196A 5.0 S 0.5 $ 203For 120"W Frame Runs 8711120 8711120A 6.0 S 0.5 $ 235For 144"W Frame Runs 8711144 8711144A 7.0 S 0.5 $ 268*Electrical harnesses are intended for use with Allsteel systems furniture and are approved under GSA SIN 711-1.When purchased separately and used without Allsteel systems furniture, those electrical harnesses marked by (*) areconsidered Open Market.Electrical Jumper Cables – Harness to HarnessUp to 30" vertical jump (66") 871366 871366A 3.0 S 0.5 $ 138Up to 69" vertical jump (108") 8713108 8713108A 3.0 S 0.5 $ 256Special extended Electrical Power Harnessesfor Reach Storage Units are on page 293.NOTE: Four-circuit components and Three-circuit components (with an “A” suffix) cannot be connected together.See pages 150-151.1st Option:Color:P BlackPExamples: 871224.P871224A.PFor specification details refer to:Working with Electrical & Data, pages 142-153Shippable by small-package carrier.154 | Systems Supplement – 3/2013SGSA SIN 711-1

Electrical & Data Electrical Components — Terrace ® 3.4/2.6Dual Electrical Eight-circuitPower Harness Kits• Kit provides back-to-back four-circuit systemsgiving double the capacity of harness andpass-thru cables on pages 154-155.• Requires two four-circuit in-feeds.• Uses four-circuit receptacles.• Models must be positioned “back-to-back” inthe panel — single-side use is not permitted• Components can only be routed in a singlerun — a single run cannot branch to multiplepanel runs at TEE and CROSS junctions• Four-circuit jumper cables (8713xx) can onlybe connected to a power block at one end of arun — power cannot be routed between a runin the base pathway and a run in the beltlinearea, except at one end of the runHow to specify —Select theModel Numberfrom above.• To connect power between the base pathwayand the beltline area, four-circuit jumpercables (8713xx) must be connected to apower block at one end of a run, routed intoan adjacent panel that contains no powerharness, then routed back into the panel thatcontains a power harness (or pass-thru cable),and connected to a power harness in the otherpathway• Standard four-circuit pass-thru cables(8710xx) can be used in between powerharnesses. Two are required in the back-tobackconfigurations.• Models can be connected to standardfour-circuit power harnesses and pass-thrus,although it is not recommended because ofpossible circuit number ambiguityFour-circuit Three-circuit3 + 1 Separate Ship ListDescription 2 + 2 Neutrals Weight Cubes PriceElectrical Pass-Thru Cable without Power Block• Two power in-feeds are required to connectthe back-to-back runs. Power in-feed 8719xxmust be connector to a power block at theend of a run• Data faceplates and terminals cannot bepositioned in a panel into which back-to-backpower harnesses are installed• Power infeeds 8719xx must be routed from apanel wherein no power harness is positioned,into an adjacent panel where a power harnessis positioned and connected to the end of apower block.• Cannot be used at beltline with Terrace 2.6.Restricted to base pathway only.For 24"W Frames 871024 871024A 2.0 S 0.5 $ 111For 30"W Frames 871030 871030A 2.0 S 0.5 $ 111For 36"W Frames 871036 871036A 2.0 S 0.5 $ 111For 42"W Frames 871042 871042A 2.5 S 0.5 $ 117For 48"W Frames 871048 871048A 2.5 S 0.5 $ 117For 60"W Frames 871060 871060A 3.0 S 0.5 $ 117For 72"W Frame Runs 871072 871072A 4.0 S 0.5 $ 161For 96"W Frame Runs 871096 871096A 5.0 S 0.5 $ 193For 120"W Frame Runs 8710120 8710120A 6.0 S 0.5 $ 225For 144"W Frame Runs 8710144 8710144A 7.0 S 0.5 $ 253NOTE: Four-circuit components and Three-circuit components (with an “A” suffix) cannot be connected together.See pages 150-151.Max. Recept. Eight-circuitCap. per 3 + 1 (each side) Ship ListDescription Panel Side 2 + 2 (each side) Weight Cubes PriceDual Electrical Eight-circuit Power Harness KitFor 24"W PanelsFor 30"W PanelsFor 36"W PanelsFor 42"W PanelsFor 48"W PanelsFor 60"W Panels1222222-8CIR242-8CIR302-8CIR362-8CIR422-8CIR482-8CIR60SSSSSS2.02.02.02.53.03.00.50.50.50.50.50.5$ 475$ 475$ 685$ 685$ 685$ 692NOTE: Kit consists of two four-circuit harnesses placed “back-to-back” to provide 8 circuits.1st Option:Color:P BlackPExamples: 871224.P871224A.PFor specification details refer to:Working with Electrical & Data, pages 142-153Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 155SGSA SIN 711-1TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & Data Electrical Components — Terrace ® 3.4/2.6Receptacle Color Recommended to Coordinate with Paint ColorPaint ColorRecommended Receptacle ColorCarob — P52 ............................................Black — E4Brilliant White — PQ8 ..............................White — EWChampagne Metallic — PR5 .....................Muslin — EUFossil — P28 .............................................Flint — E9Gunmetal Metallic— PR3..........................Brownstone — EYParchment — P93 .....................................Muslin — EUPlatinum Metallic — PR2 ..........................Loft — EVHow to specify —Select theModel Numberfrom above.87 .Four-circuit Three-circuit3 + 1 Separate Ship ListDescription 2 + 2 Neutrals Weight Cubes PriceDuplex Receptacles for Beltline or Base Pathway — Terrace 3.4 (specify color)Circuit 1 874501 874501A 0.5 S 0.5 $ 36Circuit 2 874502 874502A 0.5 S 0.5 $ 36Circuit 1, 20 AMP (Black only) 874601 874601A 0.5 S 0.5 $ 36Circuit 3 874503 874503A (iso/ded.) 0.5 S 0.5 $ 36Circuit 3 (2+ 2) 874506 0.5 S 0.5 $ 36Circuit 4 — iso/dedicated 874504 0.5 S 0.5 $ 36Duplex Receptacles for Beltline or Base Pathway — Terrace 2.6 and Reach storage units (specify color)Circuit 1 873501 871501A 0.5 S 0.5 $ 36Circuit 2 873502 871502A 0.5 S 0.5 $ 36Circuit 3 873503 871503A 0.5 S 0.5 $ 36Circuit 3 (2+2) 873506 0.5 S 0.5 $ 36Circuit 4 — iso/dedicated 873504 0.5 S 0.5 $ 36Circuit 1, 20 AMP 871601 871601A 0.5 S 0.5 $ 36Base Electrical In-Feed Cable6' Sealtight Cable for Terrace 3.4 only 874072 874072A 4.5 S 0.5 $ 2326' Sealtight Cable for Terrace 2.6 only 876072 876072A 4.5 S 0.5 $ 2226' Flex Cable 871972 871972A 4.0 S 0.5 $ 169Ceiling Electrical In-Feed Cables12' Flex Cable 871912 871912A 6.0 S 1.6 $ 22818' Flex Cable 871918 871918A 9.0 S 1.6 $ 286Hardwire Power In-Feed (New York Code)For 30"–60"W panels 871400 871400A 4.0 S 0.4 $ 218NOTE: Four-circuit components and Three-circuit components (with an “A” suffix) cannot be connected together.See pages 150-151.1st Option:ElectricalReceptacle Color(if applicable):See inside frontcover for finishes.E1st Option:Color(if applicable):P BlackPExamples: 874501.E4 874501A.EY 873501.E4 874072.PGSA SIN 711-1For specification details refer to:Working with Electrical & Data, pages 142-153Shippable by small-package carrier.156 | Systems Supplement – 3/2013S

Electrical & Data Electrical Components — Terrace ® 3.4• Power pole for Terrace 2.6 on page 158.• Veneer Trim Kit available in Stratawood orNatural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.• Both are offered in all 8 Gunlocke finishes.• Avoid glass or translucent tiles in upperposition of frames with integrated powerpoles.GSA SIN 711-1For specification details refer to:Working with Electrical & Data, pages 142-153TERRACEHow to specify —Select theModel Numberfrom above.87 . P .ShipListDescription Model Weight Cubes PriceIntegrated Power Poles (Order trim kit below) — for Terrace 3.4For 43"/56"H Panels (78") 870343 9.0 0.6 $ 378For 69"/82"H Panels (52") 870369 6.0 0.4 $ 256Integrated Power Pole Trim Kits for Terrace 3.4 Flat Trim (order pole above)20"W Panel Trim 870220 2.0 S 0.3 $ 13624"W Panel Trim 870224 2.0 S 0.3 $ 12130"W Panel Trim 870230 3.0 S 0.4 $ 12736"W Panel Trim 870236 4.0 S 0.5 $ 13542"W Panel Trim 870242 5.0 S 0.5 $ 13848"W Panel Trim 870248 6.0 S 0.6 $ 14660"W Panel Trim 870260 7.0 S 0.7 $ 153Integrated Power Pole Trim Kits for Terrace 3.4 Radius Trim (order pole above)20"W Panel Trim 870220R 2.0 S 0.3 $ 17024"W Panel Trim 870224R 2.0 S 0.3 $ 14930"W Panel Trim 870230R 3.0 S 0.4 $ 15636"W Panel Trim 870236R 4.0 S 0.5 $ 16842"W Panel Trim 870242R 5.0 S 0.5 $ 17248"W Panel Trim 870248R 6.0 S 0.6 $ 17960"W Panel Trim 870260R 7.0 S 0.7 $ 190Integrated Power Pole Trim Kits for Terrace 3.4 Radius Veneer Trim (order pole above)20"W Panel Trim 870220V D2.0 S 0.324"W Panel Trim 870224V D2.0 S 0.330"W Panel Trim 870230V D3.0 S 0.436"W Panel Trim 870236V D4.0 S 0.542"W Panel Trim 870242V D5.0 S 0.548"W Panel Trim 870248V D6.0 S 0.660"W Panel Trim 870260V D7.0 S 0.71st Option:Paint:See inside frontcover for finishes.2nd Option:Veneer Type andFinish (RadiusVeneer Trim only):See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Examples: 870224.P02 870224R.P02 870224V.P27.NE800D Discontinued 8/29/2010S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 157DDDDDDDTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & Data Electrical Components — Terrace ® 2.6• Power pole for Terrace 3.4 on page 157.• Veneer Trim Kit available in Stratawood orNatural 1 veneer.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.*6" from end to center.How to specify —Select theModel Numberfrom above.87 . PShipDescription Model Weight Cubes List PriceIntegrated Power Poles (Order trim kit below) — for Terrace 2.6For 43"/56"H Panels (78") 870469 9.0 0.6 $ 414Integrated Power Pole Trim Kits for Terrace 2.6 (order pole above)20"W Panel Trim 870220N 2.0 S 0.3 $ 11924"W Panel Trim 870224N 2.0 S 0.3 $ 12830"W Panel Trim 870230N 3.0 S 0.4 $ 13336"W Panel Trim 870236N 4.0 S 0.5 $ 14342"W Panel Trim 870242N 5.0 S 0.5 $ 14648"W Panel Trim 870248N 6.0 S 0.6 $ 15360"W Panel Trim 870260N 7.0 S 0.7 $ 161Integrated Power Pole Trim Kits for Terrace 2.6 Radius Veneer Trim (order pole above)20"W Panel Trim 870220NV 2.0 S 0.3 $ 23124"W Panel Trim 870224NV 2.0 S 0.3 $ 25530"W Panel Trim 870230NV 3.0 S 0.4 $ 26136"W Panel Trim 870236NV 4.0 S 0.5 $ 26942"W Panel Trim 870242NV 5.0 S 0.5 $ 27748"W Panel Trim 870248NV 6.0 S 0.6 $ 28160"W Panel Trim 870260NV 7.0 S 0.7 $ 2901st Option:Paint:See inside frontcover for finishes.• Avoid glass or translucent tiles in upperposition of frames with integrated powerpoles.2nd Option:Veneer Type andFinish (RadiusVeneer Trim only):See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Examples: 870469.P02 870230N.P02 870248NV.P27.NC512For specification details refer to:Working with Electrical & Data, pages 142-153Shippable by small-package carrier.158 | Systems Supplement – 3/2013SGSA SIN 711-1

Electrical & Data Electrical Components — Terrace ® 3.4/2.6Pull-up Receptacle• 6' cord w/plug; circuit breaker; mounts inworksurface grommets.• May interfere with the placement of optionalpedestals.• Included grommet may not match Allsteelworksurface grommets.Power/Data Dome• Fits into existing grommet hole to providetwo surface mounted receptacles and twodata ports.Black only8Black onlyHow to specify —Select theModel Numberfrom above.ShipListDescription Model Weight Cubes PricePull-up ReceptacleThree 15 amp Simplex Receptacles (Black only) 870300 2 S 0.2 $ 198Power/Data Dome2 simplex receptacles and 2 data positions (Black only) 870301 1 S 0.2 $ 191Power Block Beltline Mounting Brackets (for concealed receptacles facing upward at beltline only)(Pack of 6) — for Terrace 3.4 only 878007 1.0 S 0.2 $ 351 bracket required at beltline for each pass-thru harness and 24" power harness and 2 for every 30" - 60" power harness.Electrical Mounting Brackets (for use with Data/Electrical Port Tiles at beltline only)(Pack of 12) — for Terrace 3.4 only 8988EB 3.0 S 0.2 $ 56(Pack of 12) — for Terrace 2.6 only 8988EBN 3.0 S 0.2 $ 561 bracket required at beltline for each pass-thru harness and 24"W power harness and 2 for 30-60"W power harness.Electrical Port Brackets – (Allow for electrical distributionwith Data/Electrical Port Tile at any horizontal member location.)(Pack of 10 sets) — for Terrace 3.4 only 878011 1.0 S 0.6 $ 134NOTE: Brackets allow for electrical distribution every 13 vertical inches (at any horizontal member), with the followingexceptions: the bottom 13" openings of frames, including the bottom 13" of stacking frames.1 required for each pass-thru and 2 for every power harness. (Includes 8988EB brackets.)Hardwire (Chicago Code) — Black only• May interfere with the placement of optionalpedestals.• Can be mounted into field-cut, 2 1 ⁄4" diameterhole.• 6' black power cord.• 2 simplex receptacles and 2 data positions.• Includes adapters to allow use ofcommercially available data terminals orblanks to fill unused openings.Junction Box (Pack of 6) —Base Pathway only for Terrace 3.4 only 874500 4.5 S 0.1 $ 487Junction Box (Pack of 6) —Base Pathway only for Terrace 2.6 only 873500 D 4.5 S 0.1DJ-Box Metal Mounting Brackets (Pack of 6) —Beltline — for Terrace 3.4 only 878006 1.0 S 0.2 $ 66Universal Junction Box (Pack of 6) — Terrace 2.6 873550 5.6 S 0.1 $ 557Beltline Filler Kit forUniversal Junction Box (Pack of 6) — Terrace 2.6 8988BLF 1.2 S 0.1 $ 2141st Option:Color(if applicable):P BlackPExamples: 878007.P 8988EB 878011 874500.PFor specification details refer to:Working with Electrical & Data, pages 142-153• Many of the AMP, AT&T, Krone, Leviton,and other commercially available dataterminals can be used — terminals must beof a design that will snap into .695 x .650,.590 x .790, or .590 x .750 openings, in.064 max. thick faceplates.D Discontinued 7/4/2010Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 159SGSA SIN 711-1TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEElectrical & Data Electrical and Data Components — Terrace ® 3.4/2.6Wire Management Channel• Self-adhesive backing to attach to panels andunderside of worksurfaces.• Contains two cavities for routing wires.• NOTE: Each cavity provides space for amaximum of six .22" Dia. cables. Totalcapacity = 1 sq. in.Data Port Kit• Allows field installation of additional dataaccessories.• Grommet opening dimension =1.375"H x 2.700"W.Black only878002878008877010878009AEPTTGMTHow to specify —Select theModel Numberfrom above..Cable Management Tray• Attaches under the worksurface to containcables.• Metal tray shelf is 4" deep. Can holdelectrical power strip and/or surge protector.• Attachment hardware included.Wireway Grommet• Fits into any receptacle opening.• Used when routing wires through receptacleopening.Cord Retainer ClipProvides confinement of vertical electrical/datawiring.•1 1 ⁄2"H cord clips snap into vertical panel slotsto contain cords.• 4 clips are provided standard with each tasklight cord.• Package of 50.• Black only.ShipListDescription Model Weight Cubes PriceWire Management Channel92" Long (Black only) EV920 3 S 0.5 $ 120Wireway GrommetPack of 6 (Black only) TAWG 1 S 0.2 $ 97Cable Management Tray24" Tray (specify color) CMT24 2 S 0.4 $ 6636" Tray (specify color) CMT36 3 S 0.5 $ 80Cord Retainer ClipPackage of 50 (Black only) APACM2 1 S 0.1 $ 29Terrace Data AccessoriesData Mounting Bracket for application(Black only) (Pack of 10) — for Terrace 3.4 only 878009 1 S 0.2 $ 66Data Faceplate Adaptor (Black only)(Pack of 10) — for Terrace 3.4 only 878002 1 S 0.2 $ 35Internal Data Bracket (Black only)(Pack of 6) — for Terrace 3.4 only 878008 $ 106Data Management Organizer (Black only)(Pack of 10) — for Terrace 3.4 only 878010 D1 S 0.2DData Management Organizer — Pack of 20 (Black only) 877010 S$ 77Data Port Kit (specify color) — for Terrace 3.4 only AEP 1.0 S 0.2 $ 18Data/Electrical Port Kit (specify color) — for Terrace 2.6 only T2DP 1.0 S 0.2 $ 18Frame Grommets – Pack of 30, Black — for Terrace 3.4 only TTGMT ! 5.0 S 0.1 $ 601st Option:Paint Color(if applicable):See inside frontcover for finishes.P1st Option:Wireway Grommet andFrame Grommets Color(if applicable):E41st Option:Color(if applicable):P BlackGSA SIN 711-1For specification details refer to:Working with Electrical & Data, pages 142-153Examples: 878009 APACM2.P27 CMT24.P02 TAWG.E4 S Shippable by small-package carrier.160 | EV920.P 878009Systems Supplement – 3/2013P! De-emphasizedD Discontinued 8/18/2009

Electrical & DataTerrace Base Pathway Covers• Features an additional knockout for improvedutilization of power and data.• Recommended for Adept — Terraceapplications.Data Faceplates• Fit into receptacle and data port openings inpanel baserail covers, or into Data Port(AEP), Data Center (TWADC) or RetractableData Center (8974-000).• Due to panel depth, back-to-back datamodules should not be used at the beltline orin the base on Terrace 2.6 or Terrace DNA.AMP ® NETCONNECT ® Data ComponentsGSA SIN 711-1For specification details refer to:Working with Electrical & Data, pages 142-153TERRACETADF3TADJ5How to specify —Select theModel Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List PriceBase Pathway Covers — Knockouts36"W TBPLATE3-36 7 S 0.4 $ 52 $ 6242"W TBPLATE3-42 8 S 0.4 $ 54 $ 6448"W TBPLATE3-48 9 S 0.4 $ 57 $ 6760"W TBPLATE3-60 11 S 0.5 $ 65 $ 75AMP Data FaceplatesThree-Port Flex-Mode Faceplate,Black (E4) or Almond (E3) TADF3 1 S 0.1 $ 18 N/AFour-Port Flex-Mode Faceplate,Black (E4) or Almond (E3) TADF4 1 S 0.1 $ 18 N/AFour-Port Faceplate for Fiber,TADF4Black (E4) or Almond (E3) TADF4F D 1 S 0.1 DTADF4F NOTE: TADF3 can install up to 3 jacks (CAT 3, 5E or 6).TADF4 can install 4 jacks (CAT 3, 5E or 6).TADF4F can install up to 4 jacks for fiber optic.T .NOTE: TADF models are compatible with ports in Terrace Tiles.JacksAMP RJ45 CAT 5E Jack — Black only(AMP model # 1116604-2) Toolless TADJ5 1 S 0.1 $ 37 N/AAMP RJ45 CAT 6 Jack — Black only(AMP model # 1375055-2) Requires Tool TADJ6 1 S 0.1 $ 51 N/A1st Option:Paint(Base Pathway Cover only):See inside frontcover for finishes.P1st Option:Data FaceplateColor:E4 BlackE3 AlmondExamples: TBPLATE3-36.P27 TADF4.E3 TADJ5.XSystems Supplement – 3/2013 allsteeloffice.com | 161ED Discontinued 8/29/2010SShippable by small-package carrier.TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

Electrical & DataAMP ® NETCONNECT ® Data ComponentsFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETerrace Consolidation Box• Internal box can be located in the lower areaof any 30-60"W panel frame or in the upperposition of 69"H or 82"H x 30-36"W panel.• External box mounts to panel frame byattaching to vertical panel slots.• Internal box in black only. External box musthave color specified.Punch Down Modules• Punch Down Modules come with circuitidentification strips and wiring schematics forboth “A” and “B” wiring configurations.TAMCP5TAMCA510AHow to specify —Select theModel Numberfrom above.TAMConsolidation Box for TerraceModular Assemblies• CAT 5E Modular Assemblies are available insingle units of 10', 30' and 50' lengths.• Circuit identification tags come standard withevery modular assembly.• CAT 5E cables come standard with TADJ5jacks.Internal — for Terrace 3.4 (Black only) TAMCCBT D 12 1.2External — for Terrace 3.4 or 2.6 TAMCCB6 D 12 1.2AMP ® NETCONNECT ® Components• AMP NETCONNECT ® Components shownon this page are supported by AMP’s 25 yearwarranty, including reconfiguration.• 3 length modular assemblies differentiated bycolor for easy system management.• “A” and “B” wiring configurations mustmatch configurations routed to theConsolidation Point Box.ShipListDescription Model Weight Cubes PriceModular Assemblies10' CAT 5E (color blue), “A” Wiring Configuration TAMCA510A D 1 0.130' CAT 5E (color green), “A” Wiring Configuration TAMCA530A D 3 0.550' CAT 5E (color yellow), “A” Wiring Configuration TAMCA550A D 5 0.510' CAT 5E (color blue), “B” Wiring Configuration TAMCA510B D 1 0.130' CAT 5E (color green), “B” Wiring Configuration TAMCA530B D 3 0.550' CAT 5E (color yellow), “B” Wiring Configuration TAMCA550B D 5 0.5NOTE: “A” and “B” wiring configurations must match configurations routed to the Consolidation Point Box.Examples: TAMCCBT TAMCCB6.P27 TAMCA510A.XFor specification details refer to:Working with Electrical & Data, pages 142-153ShipSelectDescription Model Weight Cubes List Price List PricePunch Down Modules6 Port Modular Jack Snap-in Module,CAT 5E — Black only TAMCP5 D 1 S 0.1 DNOTE: Each punch-down module has 6 quick-connect data ports for plug-ins of modular cable assemblies.6 Port Fiber Punch Down Module —Black only TAMCPF D 2 S 0.1NOTE: Composed of outer housing and 6 jacks — field assembled.1st Option:Paint(External Consolidation Box only):See inside frontcover for finishes.P162 | Systems Supplement – 3/2013DDDD Discontinued 8/29/2010DDDDDDDDDD

NotesTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 163

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitEdge DetailPeninsulaP-ShapedBow-Front28 standard laminates, with coordinating flat edgetrim.Flat edge provides smooth transitions between allworksurfaces, regardless of shape or application.7 standard veneer finishes available in bothCleargrain and Natural 1 veneer in Natural only.Provides ability to choose the finish color wanted inthe veneer style which best suits the situation.Natural veneerProvides the characteristics and beauty of a livingorganism with unique variations of grain, growth,and color patterns.Cleargrain veneerProvides a consistent color and grain pattern for easeof reconfiguration and adding additional product.Curvilinear worksurface shapes.Provide both visual appeal and unique solutions formanaging space.Panel-supported worksurfaces are height-adjustablein 1" vertical increments with use of cantilever orend brackets.1" vertical adjustment provides user flexibility forproper positioning of worksurfaces for any task atthe appropriate height (including standing height).Adjustable-height dual-worksurfaces.Provide maximum keyboard platform worksurfaceheight adjustment for seated working postures.Accommodates individuals of different heights onmultiple shifts.Laminate with Flat or Veneer WorksurfacesPrimary Secondary ReefJettyBoomerang120° CornerWorksurface135° CornerWorksurfaceWorking with Terrace ® 3.4/2.6 WorksurfacesFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitD-Shaped60° Pie 120° CornerCountertop135° CornerCountertop164 | Systems Supplement – 3/2013CoveGSA SIN 711-1Particle board worksurfaces have threaded metalinserts to be used during mounting.Make reconfiguration easier and provides alignmentfor repeated usage.Worksurfaces can be supported by cantilevers,panel-support brackets, panel legs, freestandingpedestals or lateral files.Worksurface support options provide tremendousflexibility in design and reconfiguration. Individualworksurfaces can be connected to the panel on oneend and treated as freestanding desks on the other.Worksurfaces feature standard wire managementgrommets, or can be ordered without grommets at noupcharge.Easier specification and ordering.In-line support legs, full end panels and cantileversare non-handed and standard with leveling glides.Simplified inventory management. Installation issimple, even in buildings where floors are uneven.In-line support legs are interchangeable with Terracedesking legs.By simply removing the back vertical piece for panelattachments, the same supports can be used toconfigure a freestanding desk, making specification,reconfiguration and inventory management a snap.WaveOverview of WorksurfacesCornerRectangle Dual-SurfaceCorner Dual-SufaceQuarter RoundCountertopNOTE: Add Suffix “N” to model number for no grommets, no upcharge.

WorksurfacesFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefit1 1 ⁄4"Wave-Shaped Edge ProfilePeninsulaP-ShapedBow-Front24 standard laminates, with 9 coordinatingwave-shaped edge trims on leading edge as notedbelow.Wave-shaped edge is ergonomic and edges on sidesprovide smooth transitions between worksurfaces.Curvilinear worksurface shapes.Provide both visual appeal and unique solutions formanaging space.Panel-supported worksurfaces are height-adjustablein 1" vertical increments with use of cantilever orend brackets.1" vertical adjustment provides user flexibility forproper positioning of worksurfaces for any task atthe appropriate height (including standing height).Adjustable-height dual-worksurfaces.Provide maximum keyboard platform worksurfaceheight adjustment for seated working postures.Accommodates individuals of different heights onmultiple shifts.Particle board worksurfaces have threaded metalinserts to be used during mounting.Make reconfiguration easier and provides alignmentfor repeated usage.Laminate with Wave-Shaped Edge WorksurfacesPrimaryWorking with Terrace ® 3.4/2.6 Wave-Shaped Edge WorksurfacesJettyReefBoomerang120° CornerWorksurfaceCoveFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefit60° PieGSA SIN 711-1Worksurfaces can be supported by cantilevers,panel-support brackets, panel legs, freestandingpedestals or lateral files.Worksurface support options provide tremendousflexibility in design and reconfiguration. Individualworksurfaces can be connected to the panel on oneend and treated as freestanding desks on the other.Worksurfaces feature standard wire managementgrommets, or ordered without grommets at noupcharge.Easier specification and ordering.In-line support legs, full end panels and cantileversare non-handed and standard with leveling glides.Simplified inventory management. Installation issimple, even in buildings where floors are uneven.In-line support legs are interchangeable with TerraceFreestanding legs.By simply removing the back vertical piece for panelattachments, the same supports can be used toconfigure a freestanding desk, making specification,reconfiguration and inventory management a snap.Overview of Wave-Shaped Edge WorksurfacesShaded edge has wave edge, other edges are flat toprovide smooth transition between worksurfaces.D-ShapedWaveCorner120° CornerCountertopRectangle Dual-SurfaceCorner Dual-SufaceQuarter RoundCountertopTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGNOTE: Add Suffix “N” to model number for no grommets, no upcharge.Systems Supplement – 3/2013 allsteeloffice.com | 165

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesWorksurfaces are 1 1 ⁄4" thick with particleboard core and with top surfaces finishedin high-pressure laminate. Bottom surfacesare covered with a backer sheet.Worksurfacebracket kitssupportworksurface byattaching to anadjacent returnpanel the samewidth as theworksurface depth.Cantilever brackets can beinserted into panel reveals in1" vertical increments.Off-module bracket kitssupport one end of aworksurface to a panel thatis wider than the worksurfacedepth.Primary worksurfaces areavailable in 24" and 30"depths. Nominal worksurfacewidth is equal to nominalpanel width. 66"W to96"W include a rear centersupport bracket. Othersupport hardware is orderedseparately.Corner worksurfaces withwoodgrain laminate havegrain direction diagonal toadjacent worksurfaces. Onerear center support bracket isincluded. All other supporthardware is orderedseparately.Secondary worksurfacesare available in 12" depths.Support hardware is orderedseparately.Working with Terrace ® 3.4/2.6 Worksurfaces and SupportsWire management grommets arestandard in most worksur faces(unless specified without grommets).Flat-edged.Rectangular and CornerDual-Surface Worksurfacesprovide maximumworksurface adjustability forseated individuals of allheights.Rectangular and cornerdual-surface worksurfaces canbe mounted to panel at anybasic product height.Keyboard platforms travelfrom –6" to +6" relative tomain worksurface withlift-to-adjust, spring-assistedCorner worksurfaces optimize use ofspace, and provide a convenient locationfor computer and monitor.End-panel supports areused at the end of a runwhen no return panel ispresent.In-line support legs are usedto support worksurfaces onlyin a shared position.release. Keyboard platformarticulates from +9° to –15°tilt. For freestandingapplications, seeAdjustable-Height Tables.Flat Edge trim is available onlaminate tops in eightstandard colors (customerspecified) to match solidlaminates and to complementpatterned or woodgrainlaminates. Veneerworksurfaces have veneeredge.GSA SIN 711-1Wire managementgrommets are standard inmost worksurfaces andspecified in plastic or metal.Rectangular worksur facesover 36"W have twogrommets. Peninsula andcorner worksurfaces have one.D-Shaped worksurfaces andcountertops do not havegrom mets.166 | Systems Supplement – 3/2013

WorksurfacesOptional widthworksurfaces are availablefor use with Terrace 3.4panel runs having a “T”or “S” connection. Theseworksurfaces are 3 1 ⁄2" widerthan standard panel widths.Worksur faces can beconfigured at 29 1 ⁄2"withend-panel supports andsupport legs, or at variousheights on 1" incrementsusing specific productconfigurations. Worksurfacesmust be 29 1 ⁄2" high or lowerto allow beltline tile hinge kitto operate.Worksurface supportoptions include:Modesty panelModesty panel attachment kitSupport columnDesk-to-panel attachment kitOff-module bracket kitFlat bracketsCorner desk legWorksurface bracket kitCantilever bracketBridge and return kitsIn-line support legEnd-panel supportGussetsFreestanding pedestalWorking with Terrace ® 3.4/2.6 Worksurfaces and SupportsWorksurface bracket kitallows one end of aworksurface to be supportedby a return panel. Returnpanel width must be the sameas the depth of theworksurface.Flat brackets can be used toconnect one worksurfaceperpendicular to anotherwork surface.Cantilever brackets are leftor right handed. They can beinserted into panel reveals in1" vertical increments. Onesize is used for both 24" and30"D worksurfaces. 12"Dcantilevers are only for usewith 12"D secondaryworksurfaces. Both left andright brackets are required inshared applications.Important: Do not usecantilever brackets at the endof a work surface where no90° return panel is positioned.Bridge and return kit can beused with a worksurface tocreate a bridge or return infreestanding configurations.Off-module worksurfacebracket kit for Terrace 3.4only can be used forattachment of a worksurfaceend 29 1 ⁄2"H to a panel of anon-corresponding width.Worksurface in-line supportlegs are used to supportworksurfaces only in a sharedposition.End-panel supports are usedin place of return panels atthe end of worksurface runs.Straight worksurfaces adjacentto 135° and 120° connectionsmust be supported by full endpanels. End-panel supportscan be configured for right- orleft-handed application.Leveling glides provide 3"of adjustment.Freestanding pedestals canalso be used to support oneend of a panel-attachedworksurface in conjunctionwith worksurface bracket.Freestanding desks can becreated by combining primaryand corner worksurfaces withmodesty panels andappropriate desk supports.See pages 299-304.GSA SIN 711-1D-Shaped, P-Shaped,peninsula, jetty, boomerangand reef worksurfacesrequire sup port columns(ordered separately).Countertops are availablein straight or cornerconfigurations. Mountinghardware is included.Countertops on Terrace 3.4panels with flat trim can bemounted off-module;countertops on panels withradius trim cannot bemounted off-module.Wall track allows formounting of systems panelcomponents on permanentwall structures.Systems Supplement – 3/2013 allsteeloffice.com | 167TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesReef Worksurface90° Boomerang Worksurface110° Boomerang WorksurfaceTerrace ® 3.4 Worksurface TypicalsGSA Reference Page168 | Systems Supplement – 3/2013

WorksurfacesJetty WorksurfaceTerrace ® 3.4 Worksurface TypicalsGSA Reference PageTERRACEP-Shaped WorksurfaceD-Shaped WorksurfaceTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 169

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesPrimary Worksurface• Wire management grommets standard, onefor widths up to 36", two on widths 42"Wand greater (as illustrated).• Center support bracket on 66"W–96"Wincluded.• Wave-shaped edge, if selected, comes on theusers side, back and sides are flat.Flat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerT .24"D Primary Worksurfaces• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.PrimaryLaminate and VeneerGSA SIN 711-124"W T52424S T b 52424S 22 1.7 $ 225 $ 253 $ 491 $ 53830"W T52430S T b 52430S 26 1.7 $ 237 $ 265 $ 514 $ 56436"W T52436S T b 52436S 32 1.9 $ 266 $ 294 $ 542 $ 59442"W T52442S T b 52442S 44 2.2 $ 298 $ 326 $ 576 $ 62848"W T52448S T b 52448S 46 2.5 $ 323 $ 351 $ 627 $ 68754"W T52454S T b 52454S 48 2.8 $ 349 $ 376 $ 681 $ 74760"W T52460S T b 52460S 53 3.1 $ 396 $ 424 $ 716 $ 78466"W T52466S T b 52466S 68 3.3 $ 430 $ 458 $ 781 $ 85672"W T52472S T b 52472S 75 3.7 $ 448 $ 475 $ 808 $ 88578"W T52478S TV52478S 81 4.0 $ 581 N/A $ 846 $ 92484"W T52484S TV52484S 88 4.3 $ 608 N/A $ 879 $ 96190"W T52490S TV52490S 94 4.6 $ 719 N/A $ 912 $ 99996"W T52496S TV52496S 100 4.8 $ 754 N/A $ 953 $1043Sample Worksurface12"W x 12"D 831212M 12 1.0 $ 189 N/A N/A N/ANOTES:1) Add Suffix and Upcharge for Primary Worksurfaces up to 72" W to span a “T” or ExtendedStraight Connection — see below.Suffix = T3 (adds 3 1 ⁄2" to width for Terrace 3.4.) Suffix = T2 (adds 2 3 ⁄4" to width for Terrace 2.6.)Upcharge = $30 (laminate) $48 (veneer)2) Add Suffix “N” to model number for no grommets, no upcharge.Example: (T-Span for Terrace 3.4) T52472ST3 Example: (No grommet) T52424SN3) Add Suffix “CG” to 30"-48"W Veneer model numbers for cross grain direction, no upcharge.Example: TV52442SCG.NC511.MEL1st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1.2nd Option:Edge TrimColor(Laminate only):See inside frontcover for finishes.E .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)For specification details refer to:Working with Worksurfaces, pages 164-167Stratawood VeneerGrain DirectionLaminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List PriceExamples: T52424S.LT3B.E9.P TW52424S.LT3B.E9.P TV52424S.NC511.MELNatural VeneerGrain Direction4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte Silver170 | Systems Supplement – 3/2013

WorksurfacesPrimary Worksurface• Wire management grommets standard, onefor widths up to 36", two on widths 42"Wand greater (as illustrated).• Center support bracket on 66"W–96"Wincluded.• Wave-shaped edge, if selected, comes on theusers side, back and sides are flat.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.PrimaryLaminate and VeneerGSA SIN 711-1For specification details refer to:Working with Worksurfaces, pages 164-167Stratawood VeneerGrain DirectionNatural VeneerGrain DirectionTERRACEFlat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerT .Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price30"D Primary Worksurfaces24"W T53024S T b 53024S 27 1.7 $ 237 $ 265 $ 514 $ 56430"W T53030S T b 53030S 39 2.4 $ 285 $ 313 $ 558 $ 61236"W T53036S T b 53036S 45 2.8 $ 306 $ 334 $ 590 $ 64842"W T53042S T b 53042S 47 3.2 $ 330 $ 358 $ 634 $ 70948"W T53048S T b 53048S 52 3.6 $ 349 $ 376 $ 693 $ 76054"W T53054S T b 53054S 59 4.0 $ 388 $ 416 $ 757 $ 83160"W T53060S T b 53060S 63 4.5 $ 434 $ 462 $ 806 $ 88366"W T53066S T b 53066S 72 4.9 $ 467 $ 495 $ 872 $ 95872"W T53072S T b 53072S 80 5.3 $ 507 $ 535 $ 913 $100378"W T53078S TV53078S 87 5.7 $ 657 N/A $ 941 $103084"W T53084S TV53084S 93 6.2 $ 686 N/A $ 970 $106190"W T53090S TV53090S 100 6.6 $ 818 N/A $1007 $110196"W T53096S TV53096S 104 6.9 $ 844 N/A $1035 $1133NOTES:1) Add Suffix and Upcharge for Primary Worksurfaces up to 72"W to span a “T” or ExtendedStraight Connection — see below.Suffix = T3 (adds 3 1 ⁄2" to width for Terrace 3.4.) Suffix = T2 (adds 2 3 ⁄4" to width for Terrace 2.6.)Upcharge = $30 (laminate) $48 (veneer)2) Add Suffix “N” to model number for no grommets, no upcharge.Example: (T-Span for Terrace 3.4) T53072ST3 Example: (No grommet) T53024SN3) Add Suffix “CG” to 30"-48"W Veneer model numbers for cross grain direction, no upcharge.Example: TV53036SCG.NC511.MEL1st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1.2nd Option:Edge TrimColor(Laminate only):See inside frontcover for finishes.E .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)Examples: T53024S.LT3B.E9.P TW53024S.LT3B.E9.P TV53024S.NC511.MEL4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverSystems Supplement – 3/2013 allsteeloffice.com | 171TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesWave Worksurface• Wire management grommets standard, onefor widths up to 36", two on widths 42"Wand greater (as illustrated).• Includes center support bracket on66"W-72"W.• Wave-shaped edge, if selected, comes on theusers side, back and sides are flat.LLSWWFlat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerST .RRWaveLaminate and VeneerGSA SIN 711-1Laminate Wave Edge “W” Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description S Model Model Wt. Cubes List Price List Price List Price List PriceWave Worksurfaces30"W x 24"L x 30"R 11 1 ⁄2" T5302430W T b 5302430W 36 2.4 $ 329 $ 357 $ 753 $ 82636"W x 24"L x 30"R 13 1 ⁄2" T5362430W T b 5362430W 42 2.8 $ 351 $ 379 $ 785 $ 86142"W x 24"L x 30"R 15 1 ⁄2" T5422430W T b 5422430W 43 3.2 $ 377 $ 405 $ 832 $ 91348"W x 24"L x 30"R 15 1 ⁄2" T5482430W T b 5482430W 48 3.6 $ 402 $ 430 $ 897 $ 98554"W x 24"L x 30"R 21 1 ⁄2" T5542430W T b 5542430W 54 4.0 $ 445 $ 473 $ 986 $108160"W x 24"L x 30"R 27 1 ⁄2" T5602430W T b 5602430W 57 4.5 $ 496 $ 524 $1035 $113766"W x 24"L x 30"R 33 1 ⁄2" T5662430W T b 5662430W 66 4.9 $ 536 $ 564 $1137 $124972"W x 24"L x 30"R 39 1 ⁄2" T5722430W T b 5722430W 74 5.3 $ 580 $ 608 $1175 $1291Wave Worksurfaces30"W x 30"L x 24"R 11 1 ⁄2" T5303024W T b 5303024W 36 2.4 $ 329 $ 357 $ 753 $ 82636"W x 30"L x 24"R 13 1 ⁄2" T5363024W T b 5363024W 42 2.8 $ 351 $ 379 $ 785 $ 86142"W x 30"L x 24"R 15 1 ⁄2" T5423024W T b 5423024W 43 3.2 $ 377 $ 405 $ 832 $ 91348"W x 30"L x 24"R 15 1 ⁄2" T5483024W T b 5483024W 48 3.6 $ 402 $ 430 $ 897 $ 98554"W x 30"L x 24"R 21 1 ⁄2" T5543024W T b 5543024W 54 4.0 $ 445 $ 473 $ 986 $108160"W x 30"L x 24"R 27 1 ⁄2" T5603024W T b 5603024W 57 4.5 $ 496 $ 524 $1035 $113766"W x 30"L x 24"R 33 1 ⁄2" T5663024W T b 5663024W 66 4.9 $ 536 $ 564 $1137 $124972"W x 30"L x 24"R 39 1 ⁄2" T5723024W T b 5723024W 74 5.3 $ 580 $ 608 $1175 $1291NOTE: Add Suffix “N” to model number for no grommet, no upcharge.1st Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1.2nd Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.E .SSStratawood Veneer Grain DirectionFor specification details refer to:Working with Worksurfaces, pages 164-1673rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Mapleor E4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge onVeneer; Add $10 per grommet forlaminate)SSNatural Veneer Grain Direction4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverExamples: T5302430W.LT3B.E9.P TW5302430W.LT3B.E9.P TV5723024W.NC511.MEL172 | Systems Supplement – 3/2013

WorksurfacesBow-Front Worksurface• Two wire management grommets standard(as illustrated).• Wave-shaped edge, if selected, comes on theusers and back edges, sides are flat.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.Flat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.Prefix for Bow FrontT Laminate w/FlatTW Laminate w/WaveTV VeneerD30"D Bow-Front WorksurfacesSecondary Worksurfaces• Grommets are not available on 12"Dworksurfaces.• Order 12"D worksurface supports on page195.• When using with Adept refer to the 10/2007Adept Pricer for specification details.Bow-Front StratawoodGrain Direction and DimensionsBow-Front NaturalGrain Direction and DimensionsExamples: TT53660BT.LT3B.E9.P TW53660BT.LT3B.E9.9 TV53660BT.NC511.MELSystems Supplement – 3/2013 AUW1248MN.LS87.E4allsteeloffice.com | 173ACBBow-Front / SecondaryLaminate and VeneerGSA SIN 711-1Laminate Wave Edge “W” DLaminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Wt. Cubes List Price List Price List Price List Price30"A x 36"B x 60"C TT53660BT TV53660BT 75 5.3 $ 650 D $1158 $127130"A x 36"B x 66"C TT53666BT TV53666BT 82 5.8 $ 704 D $1186 $130230"A x 36"B x 72"C TT53672BT TV53672BT 89 6.2 $ 757 D $1212 $1330NOTE: 1. Add Suffix “N” to model number for no grommet, no upcharge..1st Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1.2nd Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.E .For specification details refer to:Working with Worksurfaces, pages 164-167LaminateLaminatew/Flat Ship w/FlatDescription Model Weight Cubes List Price12"D Secondary Worksurfaces36"W AUW1236MN 17 1.9 $ 19942"W AUW1242MN 23 2.2 $ 22348"W AUW1248MN 24 2.5 $ 24254"W AUW1254MN 25 2.8 $ 26160"W AUW1260MN 27 3.1 $ 29666"W AUW1266MN 35 3.3 $ 32172"W AUW1272MN 38 3.7 $ 3343rd Option:Grommet Type (if applicable):P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Mapleor E4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge onVeneer; Add $10 per grommet forlaminate)ACD Discontinued 8/29/2010B4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesCorner Worksurface• One wire management grommet.• Wave-shaped edge, if selected, comes on theusers side, back and sides are flat.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Rear support bracket included (left-handed).Worksurface bracket kit (order separately)required at junction where a panel iswall-mounted to a permanent wall and WallTrack stanchion is not positioned in theright-hand corner.Flat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerT .• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.24"D Corner Worksurfaces w/Straight Leading EdgeCornerLaminate and VeneerGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price36"W T53624C T b 53624C 46 3.4 $ 435 $ 463 $ 896 $ 98442"W T54224C T b 54224C 59 4.4 $ 454 $ 482 $ 954 $104748"W T54824C T b 54824C 72 5.7 $ 509 $ 537 $1084 $119124"D Corner Worksurfaces w/Radial Leading Edge36"W T53624CR T b 53624CR 46 3.4 $ 450 $ 477 $ 896 $ 98442"W T54224CR T b 54224CR 59 4.4 $ 480 $ 508 $ 954 $104748"W T54824CR T b 54824CR 72 5.7 $ 546 $ 574 $1084 $119130"D Corner Worksurfaces w/Straight Leading Edge42"W T54230C T b 54230C 76 4.4 $ 562 $ 590 $ 954 $104748"W T54830C T b 54830C 77 5.7 $ 568 $ 596 $1084 $119130"D Corner Worksurfaces w/Radial Leading Edge42"W T54230CR T b 54230CR 76 4.4 $ 579 $ 607 $ 954 $104748"W T54830CR T b 54830CR 77 5.7 $ 625 $ 652 $1084 $1191NOTE: Add Suffix “N” to model number for no grommet, no upcharge.Corner Worksurfaceswith Straight Leading Edge—Flat edgeCorner Worksurfaceswith Radial Leading Edge—Flat edge1st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix forStratawoodN prefix for Natural 1.2nd Option:Edge TrimColor(Laminate only):See inside frontcover for finishes.E .For specification details refer to:Working with Worksurfaces, pages 164-167Stratawood Veneer Grain Direction3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)Examples: T53624C.LT3B.E9.P TW53624C.LT3B.E9.P TV54230C.CE800.MELNatural Veneer Grain Direction4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte Silver174 | Systems Supplement – 3/2013

WorksurfacesCorner Cove Worksurface• Wire management grommet (as illustrated).• Center support bracket on 72"W.• Wave-shaped edge, if selected, comes on theusers side, back and sides are flat.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Rear support bracket included (left-handed).Worksurface bracket kit (order separately)required at junction where a panel iswall-mounted to a permanent wall and WallFlat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerT .Track stanchion is not positioned in theright-hand corner.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.LExtended LeftExtended RightRLStratawood Veneer Grain DirectionSystems Supplement – 3/2013 allsteeloffice.com | 175RCorner CoveLaminate and VeneerGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List PriceCorner Cove Worksurfaces – Extended Left60" x 36"–24"L / 24"R T5822EL T b 5822EL 54 5.8 $ 515 $ 543 $1213 $133260" x 36"–24"L / 30"R T5832EL T b 5832EL 60 5.8 $ 535 $ 563 $1213 $133260" x 48"–24"L / 24"R T5622EL T b 5622EL 75 6.2 $ 568 $ 596 $1618 $177760" x 48"–30"L / 24"R T5623EL T b 5623EL 82 6.2 $ 593 $ 621 $1618 $177760" x 48"–24"L / 30"R T5632EL T b 5632EL 80 6.2 $ 593 $ 621 $1618 $177760" x 48"–30"L / 30"R T5633EL T b 5633EL 85 6.2 $ 615 $ 643 $1618 $177772" x 36"–24"L / 24"R T5922EL T b 5922EL 63 6.8 $ 568 $ 596 $1322 $145272" x 36"–24"L / 30"R T5932EL T b 5932EL 65 6.8 $ 593 $ 621 $1322 $145272" x 48"–24"L / 24"R T5722EL T b 5722EL 86 7.2 $ 725 $ 752 $1768 $194272" x 48"–30"L / 24"R T5723EL T b 5723EL 95 7.2 $ 749 $ 777 $1768 $194272" x 48"–24"L / 30"R T5732EL T b 5732EL 90 7.2 $ 749 $ 777 $1768 $194272" x 48"–30"L / 30"R T5733EL T b 5733EL 98 7.2 $ 773 $ 801 $1768 $1942Corner Cove Worksurfaces – Extended Right36" x 60"–24"L / 24"R T5822ER T b 5822ER 54 5.8 $ 515 $ 543 $1213 $133236" x 60"–30"L / 24"R T5832ER T b 5832ER 60 5.8 $ 535 $ 563 $1213 $133248" x 60"–24"L / 24"R T5622ER T b 5622ER 75 6.2 $ 568 $ 596 $1618 $177748" x 60"–24"L / 30"R T5623ER T b 5623ER 82 6.2 $ 593 $ 621 $1618 $177748" x 60"–30"L / 24"R T5632ER T b 5632ER 80 6.2 $ 593 $ 621 $1618 $177748" x 60"–30"L / 30"R T5633ER T b 5633ER 85 6.2 $ 615 $ 643 $1618 $177736" x 72"–24"L / 24"R T5922ER T b 5922ER 63 6.8 $ 568 $ 596 $1322 $145236" x 72"–30"L / 24"R T5932ER T b 5932ER 65 6.8 $ 593 $ 621 $1322 $145248" x 72"–24"L / 24"R T5722ER T b 5722ER 86 7.2 $ 725 $ 752 $1768 $194248" x 72"–24"L / 30"R T5723ER T b 5723ER 95 7.2 $ 749 $ 777 $1768 $194248" x 72"–30"L / 24"R T5732ER T b 5732ER 90 7.2 $ 749 $ 777 $1768 $194248" x 72"–30"L / 30"R T5733ER T b 5733ER 98 7.2 $ 773 $ 801 $1768 $1942NOTE: Add Suffix “N” to model number for no grommet, no upcharge.1st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix forStratawoodN prefix for Natural 1.2nd Option:Edge TrimColor(Laminate only):See inside frontcover for finishes.E .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)For specification details refer to:Working with Worksurfaces, pages 164-167Examples: T5622EL.LT3B.E9.P TW5622EL.LT3B.E9.P TV5722ER.NC260.MEZLExtended LeftExtended RightRLNatural Veneer Grain Direction4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverRTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesPeninsula, P-Shaped and JettyWorksurfaces• Wire management grommets (as illustrated).• Support column ordered separately.• Wave-shaped edge, if selected, comes onleading edge, side with grommet is flat. Jettyworksurfaces are flat on sides “A” and “C”.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.Support columnordered separately.Support columnordered separately.Support columnordered separately.Support columnordered separately.Flat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerT .• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.Left-HandRight-HandStratawood Veneer Grain DirectionPeninsula / P-Shaped / JettyLaminate and VeneerGSA SIN 711-1Peninsula Worksurfaces30"W x 60"L T53060B T b 53060B 63 4.5 $ 594 $ 633 $ 825 $ 90630"W x 66"L T53066B T b 53066B 72 4.9 $ 656 $ 695 $ 925 $101530"W x 72"L T53072B T b 53072B 80 5.3 $ 716 $ 755 $ 942 $103436"W x 60"L T53660B T b 53660B 75 5.3 $ 716 $ 755 $ 971 $106536"W x 66"L T53666B T b 53666B 82 5.8 $ 795 $ 834 $1003 $110236"W x 72"L T53672B T b 53672B 89 6.2 $ 875 $ 914 $1029 $1129P-Shaped Worksurfaces w/42" Diameter End30"W x 72"L T53072PR T b 53072PR 90 7.2 $ 820 $ 860 $1240 $136130"W x 72"L T53072PL T b 53072PL 90 7.2 $ 820 $ 860 $1240 $1361Left-HandRight-Hand— Top View —Stratawood Veneer Grain DirectionNatural Veneer Grain DirectionJetty Worksurfaces – Left-Hand48"A x 66"B x 24"C x 30"D T54662JL T b 54662JL 84 6.7 $ 773 $ 812 $1641 $180348"A x 72"B x 24"C x 30"D T54722JL T b 54722JL 91 7.2 $ 787 $ 827 $1784 $195948"A x 66"B x 30"C x 30"D T54663JL TV54663JL 88 6.7 $ 806 D $1641 $180348"A x 72"B x 30"C x 30"D T54723JL TV54723JL 94 7.2 $ 819 D $1784 $1959Jetty Worksurfaces – Right-Hand48"A x 66"B x 24"C x 30"D T54662JR T b 54662JR 84 6.7 $ 773 $ 812 $1641 $180348"A x 72"B x 24"C x 30"D T54722JR T b 54722JR 91 7.2 $ 787 $ 827 $1784 $195948"A x 66"B x 30"C x 30"D T54663JR TV54663JR 88 6.7 $ 806 D $1641 $180348"A x 72"B x 30"C x 30"D T54723JR TV54723JR 94 7.2 $ 819 D $1784 $1959NOTE: 1. Add Suffix “N” to model number for no grommet, no upcharge.For specification details refer to:Working with Worksurfaces, pages 164-167Left-HandRight-HandNatural Veneer Grain DirectionLaminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price1st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix forStratawoodN prefix for Natural 1.2nd Option:Edge TrimColor(Laminate only):See inside frontcover for finishes.E .— Top View —Examples: T53060B.LT3B.E9.P TW53060B.LT3B.E9.P TV54662JL.CC511.ME4176 | Systems Supplement – 3/2013Left-Hand3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)D Discontinued 8/29/2010Right-Hand4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte Silver

WorksurfacesBoomerang Worksurface• Wire management grommet (as illustrated).• Support column ordered separately.• Wave-shaped edge, if selected, comes onleading edge, sides “A” and “C” are flat.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.BoomerangLaminate and VeneerGSA SIN 711-1For specification details refer to:Working with Worksurfaces, pages 164-167TERRACELeft-Hand L Right-Hand LLeft-Hand Right-Hand Right-HandSupport columnordered separately.Support columnordered separately.Flat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerT .Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List PriceBoomerang Worksurfaces – Left-Hand 90°48"A x 72"B x 24"C T547229BL T b 547229BL 84 7.2 $ 945 $ 984 $1721 $189148"A x 72"B x 30"C T547239BL TW547239BL 88 7.2 $ 984 $1023 D DBoomerang Worksurfaces – Left-Hand 110°36"A x 72"B x 24"C T547221BL T b 547221BL 82 7.2 $ 945 $ 984 $1721 $189136"A x 72"B x 30"C T547231BL TW547231BL 87 7.2 $ 984 $1023 D DBoomerang Worksurfaces – Right-Hand 90°48"A x 72"B x 24"C T547229BR T b 547229BR 84 7.2 $ 945 $ 984 $1721 $189148"A x 72"B x 30"C T547239BR TW547239BR 88 7.2 $ 984 $1023 D DBoomerang Worksurfaces – Right-Hand 110°36"A x 72"B x 24"C T547221BR T b 547221BR 82 7.2 $ 945 $ 984 $1721 $189136"A x 72"B x 30"C T547231BR TW547231BR 87 7.2 $ 984 $1023 D DNOTE: 1. Add Suffix “N” to model number for no grommet, no upcharge.— Top View —1st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix forStratawoodN prefix for Natural 1.Stratawood Veneer Grain Direction2nd Option:Edge TrimColor(Laminate only):See inside frontcover for finishes.E .— Top View —Stratawood Natural Veneer Veneer Grain Direction Grain Direction— Top View —3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)D Discontinued 8/29/20104th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverExamples: T547229BL.LT3B.E9.P TW547229BL.LT3B.E9.P TV547221BR.NC260.MELSystems Supplement – 3/2013 allsteeloffice.com | 177TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesReef Worksurface• Wire management grommets (as illustrated).• Includes panel support brackets (T6BK).• Wave-shaped edge, if selected, comes oncurved leading edge, other two straight edgesare flat.• Order support column separately.Support columnordered separately.Support columnordered separately.Flat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerDT .• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.ReefLaminate and VeneerGSA SIN 711-1Laminate Wave Edge “W” DLaminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price24"D Reef Worksurfaces – Left-Hand (extends to 36"D)66"W T53662CL TV53662CL 79 5.8 $ 597 D $1035 $113772"W T53722CL TV53722CL 86 6.2 $ 611 D $1068 $117230"D Reef Worksurfaces – Left-Hand (extends to 42"D)66"W T54663CL T b 54663CL D 83 7.2 $ 61172"W T54723CL T b 54723CL D 90 7.2 $ 62824"D Reef Worksurfaces – Right-Hand (extends to 36"D)66"W T53662CR TV53662CR 79 5.8 $ 597 D $1035 $113772"W T53722CR TV53722CR 86 6.2 $ 611 D $1068 $117230"D Reef Worksurfaces – Right-Hand (extends to 42"D)66"W T54663CR T b 54663CR D 83 7.2 $ 61172"W T54723CR T b 54723CR D 90 7.2 $ 628NOTE: 1. Add Suffix “N” to model number for no grommet, no upcharge.1st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix forStratawoodN prefix for Natural 1.2nd Option:Edge TrimColor(Laminate only):See inside frontcover for finishes.E .Left-HandRight-HandStratawood Veneer Grain Direction3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)For specification details refer to:Working with Worksurfaces, pages 164-167Left-HandNatural Veneer Grain DirectionExamples: T53662CL.LT3B.E9.P TW53662CL.LT3B.E9.P TV53662CR.CC511.MEZRight-Hand4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte Silver178 | Systems Supplement – 3/2013DDDDDDDDD Discontinued 8/29/2010DDDD

WorksurfacesD-Shaped Worksurfaces• Order Support Column and two 24"D in-linesupport legs separately.• Not recommended for use with T6CB24L orT6CB24R for shared applications.• Worksurface includes attachment bracket.• Wave-shaped edge, if selected, comes oncurved leading edge, other edges are flat.D-ShapedWorksurfacesSupport columnordered separately.Quarter-RoundWorksurfacesNatural VeneerGrain DirectionFlat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"Stratawood VeneerGrain DirectionHow to specify —Select the Modelnumber from above.PrefixT or TN Laminate w/FlatTW, TNW or TRW Laminate w/WaveTV or TRV VeneerT .Quarter-Round Worksurfaces• Connect two 90° panel-attachedworksurfaces.• Order support column and two flat bracketsseparately.• Wave-shaped edge, if selected, comes oncurved leading edge, other edges are flat.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.D-Shaped / Quarter-RoundLaminate and VeneerGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List PriceD-Shaped Worksurfaces – Half Round for Terrace 3.4For 2 - 24"D T524D T b 524D 52 4.0 $ 587 $ 614 $1162 $1276For 2 - 30"D T530D T b 530D D 77 5.8 $ 684 D D DD-Shaped Worksurfaces – Half Round for Terrace 2.6For 2 - 24"D TN524D TN b 524D 52 4.0 $ 587 $ 614 $1162 $1276For 2 - 30"D TN530D TN b 530D D 77 5.8 $ 684 D D DQuarter-Round Worksurfaces for Terrace 3.4 Flat Trim24"D x 24"D T52424Q T b 52424Q 18 2.0 $ 306 $ 334 $ 564 $ 61630"D x 30"D T53030Q T b 53030Q 25 2.9 $ 386 $ 414 $ 703 $ 769Quarter-Round Worksurfaces for Terrace 3.4 Radius Trim24"D x 24"D TR52424Q TR b 52424Q 18 2.0 $ 306 $ 334 $ 564 $ 61630"D x 30"D TR53030Q TR b 53030Q 25 2.9 $ 386 $ 414 $ 703 $ 769Quarter-Round Worksurfaces for Terrace 2.624"D x 24"D TN52424Q TN b 52424Q 18 2.0 $ 306 $ 334 $ 564 $ 61630"D x 30"D TN53030Q TN b 53030Q 25 2.9 $ 386 $ 414 $ 703 $ 769NOTE: Add Suffix “N” to model number for no grommet, no upcharge.1st Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1.2nd Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.EFor specification details refer to:Working with Worksurfaces, pages 164-167D Discontinued 8/29/2010Examples: T52424Q.TM32.EV TW52424Q.TM32.E2Systems Supplement – 3/2013 TNV524D.NE800allsteeloffice.com | 179TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfaces 135° / 120° / 60°Laminate and VeneerGSA SIN 711-1135° Trapezoid Worksurfaces• Standard with one wire managementgrommet in center location.• Width of unit represents dimension of rear ofunit.120° Corner Worksurfaces• Standard with one wire managementgrommet in corner location.• Rear support bracket included (left-handed).Worksurface bracket kit (order separately)required at junction where a panel iswall-mounted to a permanent wall and WallTrack stanchion is not positioned in theright-hand corner.Flat or VeneerEdge1 1 ⁄4"Wave Edge1 1 ⁄4"How to specify —Select the Modelnumber from above.PrefixT or TN Laminate w/FlatTW, TNW or TRW Laminate w/WaveTV, TNV or TRV VeneerT .60° Pie Worksurface• Order support column and two flat bracketsseparately.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price24"D 135° Trapezoid Worksurface36"W TT53624CA TV53624CA 37 1.7 $ 320 N/A $ 764 $ 82942"W TT54224CA TV54224CA 40 2.3 $ 358 N/A $ 878 $ 95348"W TT54824CA TV54824CA 43 2.9 $ 390 N/A $ 998 $108460"W TT56024CA TV56024CA 50 4.5 $ 475 N/A $1117 $1212120° Corner Worksurface30"W x 24"D TT53024CB T b 53024CB 72 7.8 $ 587 $ 614 $1095 $119036"W x 24"D TT53624CB T b 53624CB 77 7.8 $ 650 $ 678 $1296 $141042"W x 24"D TT54224CB T b 54224CB 82 9.2 $ 696 $ 724 $1540 $167748"W x 24"D TT54824CB T b 54824CB 87 9.5 $ 766 $ 794 $1773 $192960° Pie Worksurface for Terrace 3.424"D TT52424SD T b 52424SD 17 1.6 $ 367 $ 395 $ 458 $ 49660° Pie Worksurface for Terrace 2.624"D TN52424SD TN b 52424SD 17 1.6 $ 367 $ 395 $ 458 $ 496NOTE: Add Suffix “N” to model number for no grommet, no upcharge.1st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1.2nd Option:Edge TrimColor(Laminateonly):See insidefront coverfor finishes.E .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)For specification details refer to:Working with Worksurfaces, pages 164-1674th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverExamples: T52424Q.TM32.E9 TW52424Q.TM32.E2180 | TNV524D.NE800Systems Supplement – 3/2013

WorksurfacesDual-Surface Worksurface• Rectangular Dual-Surface Worksurfaces canbe mounted to panel at any height.• Keyboard platforms travel from –6" to +6"relative to main worksurface withspring-assisted, lift-to-adjust release.• Keyboard platform articulates from +9degrees to –15 degrees tilt.• One wire management grommet standard.• Panel attachment supports and hardwareincluded.• Adjacent support components cannot be usedto support dual-surface worksurfaces.Dual-Surface WorksurfacesHow to specify —Select theModel Numberfrom above.AWRDPT or AWCDPTfor Flat edge or Veneer.AWRDWT or AWCDWTfor Wave edge.AW D T – .3rd Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverEL .• If mounting corner worksurface to adjacentworksurfaces, cantilever brackets will need tobe purchased.• Wave-shaped edge, if selected, comes on frontleading edge, all other edges are flat.• Cannot be used in freestanding applications.• Veneer worksurfaces are by Gunlocke andfeature ClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.Rectangular Dual-Surface Worksurfaces36"W x 30"D AWRD b T-3630 AWRDPT-3630V D 45 2.8 $1426 $146642"W x 30"D AWRD b T-4230 AWRDPT-4230V D 47 3.2 $1461 $150148"W x 30"D AWRD b T-4830 AWRDPT-4830V D 52 3.6 $1490 $1529Corner Dual-Surface Worksurfaces42"W x 24"D AWCD b T-4224 AWCDPT-4224V D 59 4.4 $1593 $163248"W x 24"D AWCD b T-4824 AWCDPT-4824V D 72 4.4 $1721 $176042"W x 30"D AWCD b T-4230 AWCDPT-4230V D 76 4.4 $1751 $179048"W x 30"D AWCD b T-4830 AWCDPT-4830V D 77 5.7 $1782 $1821Altitude ® Dual-SurfaceLaminate and VeneerFlat Edge “P” or Laminate Laminate Veneer VeneerWave Edge “W” Veneer Ship w/Flat w/Wave V1 V3Description Model Model Wt. Cubes List Price List Price List Price List Price4th Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 11st Option:GrommetLocation:GC Center —RectangleGK CornerG0 No grommetG.Dual-Surface Corner Worksurfaces5th Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.E .Examples: AWRDWT-3630.GCMEL.LT3B.E9.P022nd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)6th Option:Paint(For Brackets):See inside frontcover for finishes.P .For specification details refer to:Working with Worksurfaces, pages 164-167Stratawood VeneerGrain DirectionNatural VeneerGrain DirectionD Discontinued 8/29/2010AWRDPT-3630.GCP.CC511.P02Continued below fSystems Supplement – 3/2013 allsteeloffice.com | 181DDDDDDDDDDDDDDTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesAltitude Adjustable-height tables provide choices in posture,accommodating individuals of differing body types. Theseeasy-to-operate units improve productivity by encouragingvariety in working positions.Freestanding adjustable-height tables:• Electrical drive system: 115 volt, 60Hz, 1/10 HP AC motor;system draws only 1.6 amps under full load• Worksurfaces can be repositioned in seconds with minimaleffort• Patented glide system maximizes stability and alignment bycompensating for off-center loads• Single worksurface models travel from 26"H for keyboardingto 40"H for a standing working position in 28 seconds• Rectangular and corner styles available• Deep-set cross member allows maximum (23") kneeclearance and easy access to electrical outlets• Load capacity: 225 lbs. (300 lbs. for 60"), including weightof worksurface(s)Freestanding adjustable-height tableswith dual-surface adjustable keyboard platforms• Keyboard platforms travel from –6" to +6" relative to mainworksurface• Dual-surface models, incorporating keyboard platform, allowan additional 12" of vertical travel, for a total range ofmotion from 20"H to 46"H, or 26"• Spring-assisted, lift-to-adjust release mechanism with infinitelocking allows quick and easy height adjustment of keyboardplatform and eliminates need for release paddle• Keyboard surface articulates from +9 degrees to –15 degreestilt; tension knob allows keyboard to be secured in desiredangle• The preferred solution for sit/stand work applications, wheremaximum range of motion is desiredApplications:Clerical workstations, executive, technical/CAD, administrative,creative, customer service.For replacement tops for Altitude tables purchased prior toApril 2002, please call Allsteel Customer Support.Knee ClearanceRectangular singleanddual-worksurfaces24" Deep.......................13 7 ⁄8"30" Deep.......................19 7 ⁄8"Corner single- anddual-worksurfaces35" x 24"......................13 3 ⁄4"41" x 24"......................16 1 ⁄4"41" x 30"......................22 1 ⁄4"47" x 24"......................18 3 ⁄4"47" x 30"......................24 3 ⁄4"Working with Altitude ® TablesGSA Reference PageFreestanding Adjustable-Height Tables14" vertical travelMaximum knee clearance (see table below)Access to voice and data outlets in panelsSmooth, fluid motionFreestanding Adjustable-HeightTables With Dual-SurfaceAdjustable Keyboard Platforms12" keyboard vertical travel26" total vertical travelTilt adjustment knobsRequires minimal force to raise and lowerSmooth, fluid motionLift-to-adjust mechanism182 | Systems Supplement – 3/2013

WorksurfacesWorking with Altitude ® TablesStraight BaseStraight Base — 60"WAngled BaseSpecificationsGSA Reference PageModel Top Top LoadNumber Size Weight Surface CapacityRectangular Single-Surface:ATRSP-3624 34"W x 24"D 25 lbs. Single 200 lbs.ATRSP-4224 40"W x 24"D 29 lbs. Single 196 lbs.ATRSP-4824 46"W x 24"D 34 lbs. Single 191 lbs.ATRSP-3630 34"W x 30"D 31 lbs. Single 194 lbs.ATRSP-4230 40"W x 30"D 37 lbs. Single 188 lbs.ATRSP-4830 46"W x 30"D 42 lbs. Single 183 lbs.Corner Single-Surface:ATCSP-4824 47"W x 24"D 34 lbs. Single 191 lbs.ATCSP-4230 41"W x 30"D 38 lbs. Single 187 lbs.ATCSP-4830 47"W x 30"D 43 lbs. Single 182 lbs.Rectangular Dual-Surface:ATRDP-3630 34"W x 30"D 31 lbs. Dual 194 lbs.ATRDP-4230 40"W x 30"D 37 lbs. Dual 188 lbs.ATRDP-4830 46"W x 30"D 42 lbs. Dual 183 lbs.Corner Dual-Surface:ATCDP-4824 47"W x 24"D 52 lbs. Dual 173 lbs.ATCDP-4230 41"W x 30"D 56 lbs. Dual 169 lbs.ATCDP-4830 47"W x 30"D 61 lbs. Dual 164 lbs.Model Top Top LoadNumber Size Weight Surface CapacityRectangular Single-Surface — 60"W base:ATRSP-6024 58"W x 24"D 42 lbs. Single 258 lbs.ATRSP-6030 58"W x 30"D 53 lbs. Single 247 lbs.Model Top Top LoadNumber Size Weight Surface CapacityCorner Single-Surface:ATCSP-3624 35"W x 24"D 25 lbs. Single 200 lbs.ATCSP-4224 41"W x 24"D 30 lbs. Single 195 lbs.Corner Dual-Surface:ATCDP-4224 41"W x 24"D 48 lbs. Dual 177 lbs.TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 183

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfaces• Electrical drive system.• Worksurfaces can be quickly repositionedwith one touch control.• Single-worksurface travels from 26"H forkeyboarding to 40"H for standing workingposition.• Load capacity is 225 lbs. including weight oftop. (See page 183 for top weight and baseload.)How to specify —Select theModel Numberfrom above.• Wave-shaped edge, if selected, comes on frontusers side, back and sides are flat.• Veneer adjustable-height worksurfaces byGunlocke featuring the ClearTech ® finishsystem.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.Flat Edge “P” Laminate Laminateor Wave Edge “W” Ship w/Flat w/WaveDescription Model Weight Cubes List Price List PriceRectangular Tables, Single-Surface, Laminate, Flat “P” or Wave “W” edge detailRectangular Top Table, 34"W x 24"D ATRS b -3624LE 102 6.1 $3010 $3040Rectangular Top Table, 40"W x 24"D ATRS b -4224LE 114 6.6 $3039 $3070Rectangular Top Table, 46"W x 24"D ATRS b -4824LE 116 6.9 $3070 $3100Rectangular Top Table, 58"W x 24"D ATRS b -6024LE 170 29.5 $3130 $3159Rectangular Top Table, 34"W x 30"D ATRS b -3630LE 115 6.9 $3069 $3099Rectangular Top Table, 40"W x 30"D ATRS b -4230LE 117 7.6 $3101 $3132Rectangular Top Table, 46"W x 30"D ATRS b -4830LE 122 7.6 $3130 $3159Rectangular Top Table, 58"W x 30"D ATRS b -6030LE 180 30.3 $3189 $3220Rectangular Tables, Single-Surface, VeneerRectangular Top Table, 34"W x 24"D ATRSP-3624VE 102 6.1 $3303 $3615Rectangular Top Table, 40"W x 24"D ATRSP-4224VE 114 6.6 $3335 $3651Rectangular Top Table, 46"W x 24"D ATRSP-4824VE 116 6.9 $3369 $3687Rectangular Top Table, 58"W x 24"D ATRSP-6024VE 170 29.5 $3436 $3762Rectangular Top Table, 34"W x 30"D ATRSP-3630VE 115 6.8 $3369 $3687Rectangular Top Table, 40"W x 30"D ATRSP-4230VE 117 7.6 $3401 $3722Rectangular Top Table, 46"W x 30"D ATRSP-4830VE 122 7.6 $3436 $3762Rectangular Top Table, 58"W x 30"D ATRSP-6030VE 180 30.3 $3499 $3830Examples: ATRSW-3624LE.P02.G0.LT3B.E9Altitude ® Adjustable-Height TablesRectangular Single-SurfaceGSA SIN 711-1For specification details refer to:Working with Altitude Tables, pages 182-183Veneer VeneerVeneer Ship V1 V3Description Model Weight Cubes List Price List Price1st Option:Paint:ATRS – E . P .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)See inside frontcover for finishes.4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte Silver.2nd Option:GrommetLocation:GC CenterG0 No GrommetG5th Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1ATRSP-3624LE.P02.GCMEL.NC701184 | Systems Supplement – 3/2013.6th Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.EStratawood VeneerGrain DirectionNatural VeneerGrain DirectionContinued below f

Worksurfaces• Electrical drive system.• Worksurfaces can be quickly repositionedwith one-touch control.• Dual-worksurface travels from 26"H forkeyboarding to 40"H for standing workingposition.• Dual-surface worksurface keyboard platformallows an additional 12" of vertical travel fora total range of motion from 20"H to 46"H.• Load capacity is 225 lbs. including weight oftop. (See page 183 for top weight and baseload.)How to specify —Select theModel Numberfrom above.• Wave-shaped edge, if selected, comes on frontand leading edge, back and sides are flat.• Keyboard platform has a spring-assisted,lift-to-adjust release mechanism with infinitelocking positions.• Dual-surface keyboard platform articulatesfrom +9 degrees to –15 degrees tilt.• Veneer adjustable-height worksurfaces byGunlocke featuring the ClearTech ® finishsystem.• Stratawood veneer has a consistentstraight-grain pattern.Flat Edge “P” Laminate Laminateor Wave Edge “W” Ship w/Flat w/WaveDescription Model Weight Cubes List Price List PriceRectangular Tables, Dual-Surface, Laminate, Flat “P” or Wave “W” edge detailRectangular Dual-Surface Table, 34"W x 30"D ATRD b -3630LE 136 8.1 $4073 $4115Rectangular Dual-Surface Table, 40"W x 30"D ATRD b -4230LE 138 9.0 $4145 $4188Rectangular Dual-Surface Table, 46"W x 30"D ATRD b -4830LE 143 9.0 $4215 $4257Veneer VeneerVeneer Ship V1 V3Description Model Weight Cubes List Price List PriceRectangular Tables, Dual-Surface, VeneerRectangular Dual-Surface Table, 34"W x 30"D ATRDP-3630VE 136 8.1 $4472 $4900Rectangular Dual-Surface Table, 40"W x 30"D ATRDP-4230VE 138 9.0 $4550 $4987Rectangular Dual-Surface Table, 46"W x 30"D ATRDP-4830VE 143 9.0 $4632 $50761st Option:Paint:See inside frontcover for finishes.ATRD – E . P .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte Silver.2nd Option:GrommetLocation:GC CenterG0 No GrommetGExamples: ATRDW-3630LE.P02.G0.LT3B.E95th Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Altitude ® Adjustable-Height TablesRectangular Dual-SurfaceGSA SIN 711-1For specification details refer to:Working with Altitude Tables, pages 182-183• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.ATRDP-3630VE.P02.GCMEZ.CC511Systems Supplement – 3/2013 allsteeloffice.com | 185.6th Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.EStratawood VeneerGrain DirectionNatural VeneerGrain DirectionContinued below fTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfaces• Electrical drive system.• Worksurfaces can be quickly repositionedwith one-touch control.• Single-worksurface travels from 26"H forkeyboarding to 40"H for standing workingposition.• Load capacity is 225 lbs. including weight oftop. (See page 183 for top weight and baseload.)• Wave-shaped edge, if selected, comes on usersside, back and sides are flat.How to specify —Select theModel Numberfrom above.Flat Edge “P” Laminate Laminateor Wave Edge “W” Ship w/Flat w/WaveDescription Model Weight Cubes List Price List PriceCorner Tables, Single-Surface, Laminate, Flat “P” or Wave “W” edge detailCorner Table, 35"W x 24"D ATCS b -3624LE 116 8.5 $3228 $3260Corner Table, 41"W x 24"D ATCS b -4224LE 129 8.5 $3300 $3330Corner Table, 47"W x 24"D ATCS b -4824LE 142 10.9 $3389 $3419Corner Table, 41"W x 30"D ATCS b -4230LE 146 8.5 $3345 $3374Corner Table, 47"W x 30"D ATCS b -4830LE 147 10.9 $3445 $3475Veneer VeneerVeneer Ship V1 V3Description Model Weight Cubes List Price List PriceCorner Tables, Single-Surface, Veneer• Veneer adjustable-height worksurfaces byGunlocke featuring the ClearTech ® finishsystem.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.Corner Table, 35"W x 24"D ATCSP-3624VE 116 8.5 $3544 $3880Corner Table, 41"W x 24"D ATCSP-4224VE 129 8.5 $3625 $3969Corner Table, 47"W x 24"D ATCSP-4824VE 142 10.9 $3716 $4071Corner Table, 41"W x 30"D ATCSP-4230VE 146 8.5 $3668 $4017Corner Table, 47"W x 30"D ATCSP-4830VE 147 10.9 $3779 $4139ATCS – E . P .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)1st Option:Paint:See inside frontcover for finishes.4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverEL .2nd Option:GrommetLocation:GK CornerG0 No GrommetGExamples: ATCSP-3624LE.P02.G0.LT3B.E95th Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Altitude ® Adjustable-Height TablesCorner Single-SurfaceGSA SIN 711-1For specification details refer to:Working with Altitude Tables, pages 182-183ATCSP-3624VE.P02.GKMEL.CE800186 | Systems Supplement – 3/2013.6th Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.EStratawood VeneerGrain DirectionNatural VeneerGrain DirectionContinued below f

Worksurfaces• Electrical drive system.• Worksurfaces can be quickly repositionedwith one touch control.• Dual-worksurface travels from 26"H forkeyboarding to 40"H for standing workingposition.• Load capacity is 225 lbs. including weight oftop. (See page 183 for top weight and baseload.)• Wave-shaped edge, if selected, comes on usersside, back and sides are flat.• Dual-surface worksurface keyboard platformallows an additional 12" of vertical travel fora total range of motion from 20"H to 46"H.How to specify —Select theModel Numberfrom above.Flat Edge “P” Laminate Laminateor Wave Edge “W” Ship w/Flat w/WaveDescription Model Weight Cubes List Price List PriceCorner Tables, Dual-Surface, Laminate, Flat “P” or Wave “W” edge detailCorner Table, 41"W x 24"D ATCD b -4224LE 150 9.9 $4260 $4304Corner Table, 47"W x 24"D ATCD b -4824LE 163 12.3 $4335 $4378Corner Table, 41"W x 30"D ATCD b -4230LE 166 9.9 $4308 $4350Corner Table, 47"W x 30"D ATCD b -4830LE 168 12.3 $4391 $4433Veneer VeneerVeneer Ship V1 V3Description Model Weight Cubes List Price List PriceCorner Tables, Dual-Surface, Veneer• Keyboard platform has a spring-assisted,lift-to-adjust release mechanism with infinitelocking positions.• Dual-worksurface keyboard platformarticulates from +9 degrees to –15 degrees tilt.• Veneer adjustable-height worksurfaces byGunlocke featuring the ClearTech ® finishsystem.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.Corner Table, 41"W x 24"D ATCDP-4224VE 150 9.9 $4681 $5129Corner Table, 47"W x 24"D ATCDP-4824VE 163 12.3 $4762 $5219Corner Table, 41"W x 30"D ATCDP-4230VE 166 9.9 $4735 $5189Corner Table, 47"W x 30"D ATCDP-4830VE 168 12.3 $4824 $5287ATCD – E . P .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on Veneer;Add $10 per grommet for laminate)S Square Metal (no upcharge on Veneer;Add $10 per grommet for laminate)1st Option:Paint:See inside frontcover for finishes.4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverEL .2nd Option:GrommetLocation:GK CornerG0 No GrommetGExamples: ATCDW-4224LE.P02.G0.LT3B.E95th Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Altitude ® Adjustable-Height TablesCorner Dual-SurfaceGSA SIN 711-1For specification details refer to:Working with Altitude Tables, pages 182-183ATCDP-4224VE.P27.GKME4.NE800Systems Supplement – 3/2013 allsteeloffice.com | 187.6th Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.EStratawood VeneerGrain DirectionNatural VeneerGrain DirectionContinued below fTERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesORDERINGThe 9120 Program can be used to order particle board rectangularworksurfaces in any non-standard width and depth in 1 ⁄8" incrementsup to a maximum of 120" W x 36" D.Specify:1. Model NumberSpecify closest nominal width/depth model on page 289(round up).2. Grommet Option (if desired)See grommet specification instructions on this page.3. Grommet Type:P PlasticM Metal (add $10 per grommet)4. Grommet Color:(Metal only)EL Matte SilverNOTE: Plastic grommet will match flat edge.5. Laminate ChoicesSee LAMINATES inside front cover.6. Flat Edge Color ChoicesSee EDGE COLORS inside front cover.7. Exact SizeSpecify the EXACT Width and EXACT Depth you require.Width and depth is specified in 1 ⁄8" increments which is denoted asa single digit following the whole number dimension at the end ofthe model number string.1⁄8" = 1 5⁄8" = 52⁄8" = 2 6⁄8" = 63⁄8" = 3 7⁄8" = 74⁄8" = 4 no extra increment = 0For example, when ordering a worksurface that is34 5 ⁄8"W x 20 1 ⁄2"D, specfication should be 345Wx204D.Example: 9120R3624.G0.TM33.EU.345Wx204D.9120Flat Edge All SidesWidthDepthPRODUCT SPECIFICATIONS• Flat Edge on all sides• 45 lb. Particle Board•1 1 ⁄4" Top Thickness• .020 Resin Impregnated Paper Backer Sheet• Grommets Available• Maximum Width 120" (maximum recommended unsupported spanis 42")• Maximum Depth 36"• Standard Allsteel Laminates (for specials see page 8)• Quantities of 10 or greater are palletized; less than 10 areindividually cartoned.NOTE: 9120 worksurfaces do not include a steel support channel.Maximum unsupported span is 42". 9120 worksurfaces do nothave pre-drilled pilot holes or threaded metal inserts.When spanning multiple freestanding storage units with oneworksurface, add 1 ⁄8" for each additional storage unit. For example,when ordering a worksurface for three 30"W lateral files. 3 units x30" = 90" + 1 ⁄8" + 1 ⁄8" = 90 1 ⁄4" worksurface. Do NOT follow this rule ifpanel wrapping storage units.9120 ProgramLaminate Worksurfaces / Non-Standard SizesCHANGES / CANCELLATIONS GSA Reference PageNo changes/cancellations for 9120 Program Worksurfaces.GROMMET SPECIFICATIONSPlastic grommets are made of durable ABS plastic and grommetsmatch edge color on laminate worksurfaces. Metal grommets are onlyavailable Matte Silver for laminate and square for veneer.PRICINGOne Grommet – GC, GL, GR Position ...........................$15.00Two Grommets – G3 Position ..........................................$30.00Two Grommets – G4 Position ..........................................$30.00NOTE: Add $10 per grommet for Metal.ORDERINGSpecify grommet location and color.Example: 9120R10836.GCP.TM33.EU.1022Wx326DCode Grommet PositionGC Centered side-to-side – 3 1 ⁄8" from rear to grommet edge; 4 1 ⁄2"from rear to grommet centerGL 3" from left side – 3 1 ⁄8" from rear to grommet edge; 4 1 ⁄2" fromrear to grommet centerGR 3" from right side – 3 1 ⁄8" from rear to grommet edge; 4 1 ⁄2" fromrear to grommet centerG3 Pair of grommets each 18" from side edge – 3 1 ⁄8" from rear togrommet edge; 4 1 ⁄2" from rear to grommet center (Position G3not available on tops 60"W or less.)G4 Pair of grommets each 3 1 ⁄8" from side edge – 3 1 ⁄8" from rear togrommet edge; 4 1 ⁄2" from rear to grommet center (Position G4not available on tops 60"W or less.)G0 No grommetsDimensions are from grommet center line to top edge.GLGAGXGMGrommet positions other than those shown above are considerednon-standard.G4G3GCGQRectangular TopGYGNGRGB188 | Systems Supplement – 3/2013

Worksurfaces9120 ProgramLaminate Worksurfaces / Non-Standard SizesGSA SIN 711-1Maximum Model Width Depth Ship List PriceWIDTH DEPTH Number MIN MAX MIN MAX Weight Cubes L1 L2 L318" 18" 9120R1818 180W 180W 174D 180D 13.0 1.1 $ 259 $ 272 $ 28524" 9120R2418 181W 240W 174D 180D 17.0 1.3 $ 270 $ 283 $ 29730" 9120R3018 241W 300W 174D 180D 21.0 1.6 $ 282 $ 296 $ 31036" 9120R3618 301W 360W 174D 180D 26.0 1.9 $ 308 $ 323 $ 33942" 9120R4218 361W 420W 174D 180D 30.0 2.2 $ 339 $ 355 $ 37348" 9120R4818 421W 480W 174D 180D 34.0 2.5 $ 391 $ 411 $ 43060" 9120R6018 481W 600W 174D 180D 42.0 3.1 $ 486 $ 511 $ 53472" 9120R7218 601W 720W 174D 180D 51.0 3.6 $ 587 $ 616 $ 64684" 9120R8418 721W 840W 174D 180D 59.0 4.2 $ 769 $ 807 $ 84696" 9120R9618 841W 960W 174D 180D 68.0 4.8 $ 795 $ 835 $ 874108" 9120R10818 961W 1080W 174D 180D 76.0 5.4 $ 908 $ 953 $ 999120" 9120R12018 1081W 1200W 174D 180D 85.0 6.0 $1035 $1087 $113824" 24" 9120R2424 181W 240W 181D 240D 22.0 1.7 $ 295 $ 309 $ 32530" 9120R3024 241W 300W 181D 240D 26.0 1.7 $ 306 $ 321 $ 33736" 9120R3624 301W 360W 181D 240D 30.0 1.9 $ 334 $ 350 $ 36742" 9120R4224 361W 420W 181D 240D 35.0 2.2 $ 365 $ 384 $ 40148" 9120R4824 421W 480W 181D 240D 39.0 2.5 $ 416 $ 437 $ 45760" 9120R6024 481W 600W 181D 240D 53.0 3.1 $ 511 $ 537 $ 56372" 9120R7224 601W 720W 181D 240D 61.0 3.7 $ 611 $ 642 $ 67284" 9120R8424 721W 840W 181D 240D 70.0 4.6 $ 795 $ 835 $ 87496" 9120R9624 841W 960W 181D 240D 83.0 5.3 $ 820 $ 861 $ 902108" 9120R10824 961W 1080W 181D 240D 92.0 5.9 $ 935 $ 981 $1029120" 9120R12024 1081W 1200W 181D 240D 101.0 6.5 $1060 $1113 $116630" 30" 9120R3030 241W 300W 241D 300D 31.0 2.4 $ 354 $ 372 $ 38936" 9120R3630 301W 360W 241D 300D 37.0 2.8 $ 372 $ 391 $ 40942" 9120R4230 361W 420W 241D 300D 45.0 3.2 $ 395 $ 415 $ 43448" 9120R4830 421W 480W 241D 300D 51.0 3.6 $ 428 $ 450 $ 47160" 9120R6030 481W 600W 241D 300D 64.0 4.5 $ 562 $ 589 $ 61672" 9120R7230 601W 720W 241D 300D 75.0 5.3 $ 641 $ 673 $ 70584" 9120R8430 721W 840W 241D 300D 86.0 5.7 $ 972 $1020 $106996" 9120R9630 841W 960W 241D 300D 101.0 6.5 $ 997 $1046 $1097108" 9120R10830 961W 1080W 241D 300D 112.0 7.3 $1122 $1178 $1234120" 9120R12030 1081W 1200W 241D 300D 123.0 8.1 $1249 $1312 $137436" 36" 9120R3636 301W 360W 301D 360D 51.0 3.0 $ 502 $ 527 $ 55242" 9120R4236 361W 420W 301D 360D 59.0 3.5 $ 571 $ 600 $ 62848" 9120R4836 421W 480W 301D 360D 67.0 3.9 $ 642 $ 674 $ 70660" 9120R6036 481W 600W 301D 360D 84.0 4.9 $ 785 $ 824 $ 86372" 9120R7236 601W 720W 301D 360D 101.0 5.8 $ 925 $ 971 $101884" 9120R8436 721W 840W 301D 360D 118.0 6.7 $1122 $1178 $123496" 9120R9636 841W 960W 301D 360D 135.0 7.7 $1147 $1205 $1261108" 9120R10836 961W 1080W 301D 360D 152.0 8.6 $1273 $1337 $1401120" 9120R12036 1081W 1200W 301D 360D 169.0 9.5 $1399 $1469 $1539TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 189

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACECountertopsCountertop• Mounting brackets and attaching hardwareincluded.• Countertops for Terrace 3.4 Radius Trimcome with a black flat profile top cap.• Countertops for Terrace 2.6 come with apainted top cap — specify color.• Wave-shaped edge, if selected, comes on frontand back edges, sides are flat.How to specify —Select theModel Numberfrom above.PrefixT or TN Laminate w/FlatTR Laminate w/RadiusTW, TRW or TNW Laminate w/WaveTV, TRV or TNV VeneerT S .• Veneer countertops by Gunlocke featuring theClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.15"D Straight Countertops — for Terrace 3.4 Flat TrimStraight CountertopsLaminate and VeneerGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price24"W TT51524S T b 51524S 15 1.1 $ 197 $ 225 $ 433 $ 47330"W TT51530S T b 51530S 19 1.3 $ 220 $ 248 $ 471 $ 51636"W TT51536S T b 51536S 21 1.5 $ 245 $ 272 $ 511 $ 56042"W TT51542S T b 51542S 25 1.8 $ 254 $ 282 $ 552 $ 60448"W TT51548S T b 51548S 29 2.0 $ 267 $ 295 $ 594 $ 65154"W TT51554S T b 51554S 33 2.2 $ 302 $ 330 $ 631 $ 69160"W TT51560S T b 51560S 37 2.4 $ 338 $ 366 $ 675 $ 73966"W TT51566S T b 51566S 41 2.6 $ 351 $ 379 $ 712 $ 77972"W TT51572S T b 51572S 45 2.9 $ 364 $ 392 $ 754 $ 82515"D Straight Countertops — for Terrace 3.4 Radius Trim24"W TR51524S TR b 51524S 15 1.1 $ 236 $ 264 $ 474 $ 51430"W TR51530S TR b 51530S 19 1.3 $ 260 $ 288 $ 514 $ 55936"W TR51536S TR b 51536S 21 1.5 $ 284 $ 312 $ 554 $ 60442"W TR51542S TR b 51542S 25 1.8 $ 294 $ 322 $ 596 $ 65048"W TR51548S TR b 51548S 29 2.0 $ 307 $ 335 $ 636 $ 69354"W TR51554S TR b 51554S 33 2.2 $ 341 $ 369 $ 677 $ 73760"W TR51560S TR b 51560S 37 2.4 $ 377 $ 405 $ 715 $ 77966"W TR51566S TR b 51566S 41 2.6 $ 392 $ 420 $ 756 $ 82372"W TR51572S TR b 51572S 45 2.9 $ 402 $ 430 $ 798 $ 86915"D Straight Countertops — for Terrace 2.624"W TN51524S TN b 51524S 15 1.1 $ 197 $ 225 $ 433 $ 47330"W TN51530S TN b 51530S 19 1.3 $ 220 $ 248 $ 471 $ 51736"W TN51536S TN b 51536S 21 1.5 $ 245 $ 272 $ 511 $ 56142"W TN51542S TN b 51542S 25 1.8 $ 254 $ 282 $ 552 $ 60548"W TN51548S TN b 51548S 29 2.0 $ 267 $ 295 $ 594 $ 65154"W TN51554S TN b 51554S 33 2.2 $ 302 $ 330 $ 631 $ 69160"W TN51560S TN b 51560S 37 2.4 $ 338 $ 366 $ 675 $ 74066"W TN51566S TN b 51566S 41 2.6 $ 351 $ 379 $ 712 $ 78072"W TN51572S TN b 51572S 45 2.9 $ 364 $ 392 $ 754 $ 8281st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1.2nd Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.E3rd Option:Top Trim Color(Terrace 2.6 only)Paint:See inside frontcover for finishes.For specification details refer to:Working with Worksurfaces, pages 164-167Stratawood VeneerGrain DirectionExamples: TT51524S.LT3B.E9 TN51572S.LT3B.E9.PR2 TV51536S.CE800Natural VeneerGrain Direction190 | Systems Supplement – 3/2013

CountertopsCountertop• Mounting brackets and attaching hardwareincluded.• Countertops for Terrace 3.4 Radius Trimcome with a black flat profile top cap.• Countertops for Terrace 2.6 come with apainted top cap — specify color.• Wave-shaped edge, if selected, comes on frontand back edges, sides are flat.• Veneer countertops by Gunlocke featuring theClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.Corner CountertopsLaminate and VeneerGSA SIN 711-1For specification details refer to:Working with Worksurfaces, pages 164-167Stratawood VeneerGrain DirectionNatural VeneerGrain DirectionTERRACEHow to specify —Select theModel Numberfrom above.PrefixT or TN Laminate w/FlatTR Laminate w/RadiusTW, TRW or TNW Laminate w/WaveTV, TRV or TNV VeneerT C .Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price15"D Corner Countertops — for Terrace 3.4 Flat Trim24"W x 24"W TT52424C T b 52424C 34 2.8 $ 382 $ 421 $1168 $128030"W x 30"W TT53030C T b 53030C 39 3.7 $ 444 $ 484 $1258 $137836"W x 36"W TT53636C T b 53636C 45 4.8 $ 493 $ 532 $1358 $148615"D Corner Countertops — for Terrace 3.4 Radius Trim24"W x 24"W TR52424C TR b 52424C 34 2.8 $ 421 $ 460 $1212 $121230"W x 30"W TR53030C TR b 53030C 39 3.7 $ 485 $ 524 $1302 $142236"W x 36"W TR53636C TR b 53636C 45 4.8 $ 533 $ 572 $1402 $153015"D Corner Countertops — for Terrace 2.624"W x 24"W TN52424C TN b 52424C 34 2.8 $ 382 $ 421 $1168 $128130"W x 30"W TN53030C TN b 53030C 39 3.7 $ 444 $ 484 $1258 $138036"W x 36"W TN53636C TN b 53636C 45 4.8 $ 493 $ 532 $1358 $14861st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1.2nd Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.E .3rd Option:Top Trim Color(Terrace 2.6 only)Paint:See inside frontcover for finishes.Examples: TT52424C.TM41.E9 TNW52424C.LT3B.E9.PR2 TV53030C.NC511Systems Supplement – 3/2013 allsteeloffice.com | 191TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfaces135° Countertop• Mounting brackets and attaching hardwareincluded.• Mounts on top of panel of equal width.Stratawood VeneerGrain DirectionHow to specify —Select theModel Numberfrom above.PrefixT or TN Laminate w/FlatTR Laminate w/RadiusTW, TRW or TNW Laminate w/WaveTV, TRV or TNV VeneerT C S .Natural VeneerGrain Direction120° Countertop• Mounting brackets and attaching hardwareincluded.• Countertops for Terrace 3.4 Radius Trimcome with a black flat profile top cap.• Countertops for Terrace 2.6 come with apainted top cap — specify color.135° Trapezoid Countertops — for Terrace 3.4 Flat Trim135° Trapezoid and 120° Corner CountertopsLaminate and VeneerGSA SIN 711-1For specification details refer to:Working with Worksurfaces, pages 164-167Laminate Laminate Laminate Veneer Veneerw/Flat Edge Veneer Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price36"W TT53636CSA TV53636CSA 29 4.2 $ 339 N/A $ 728 $ 79242"W TT54242CSA TV54242CSA 33 5.2 $ 381 N/A $ 839 $ 91048"W TT54848CSA TV54848CSA 37 6.3 $ 412 N/A $ 947 $102960"W TT56060CSA TV56060CSA 41 9.0 $ 506 N/A $1065 $1156Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List Price120° Corner Countertops — for Terrace 3.4 Flat Trim30"W x 30"W TT53030CSB T b 53030CSB 35 4.9 $ 621 $ 648 $1158 $125836"W x 36"W TT53636CSB T b 53636CSB 40 6.6 $ 690 $ 717 $1372 $149042"W x 42"W TT54242CSB T b 54242CSB 46 8.4 $ 738 $ 766 $1633 $177448"W x 48"W TT54848CSB T b 54848CSB 53 10.3 $ 815 $ 843 $1879 $2041120° Corner Countertops — for Terrace 3.4 Radius Trim30"W x 30"W TR53030CSB TR b 53030CSB 35 4.9 $ 662 $ 701 $1181 $128336"W x 36"W TR53636CSB TR b 53636CSB 40 6.6 $ 730 $ 769 $1397 $151742"W x 42"W TR54242CSB TR b 54242CSB 46 8.4 $ 780 $ 819 $1654 $179748"W x 48"W TR54848CSB TR b 54848CSB 53 10.3 $ 854 $ 894 $1901 $2065120° Corner Countertops — for Terrace 2.630"W x 30"W TN53030CSB TN b 53030CSB 35 4.9 $ 559 $ 573 $1158 $127436"W x 36"W TN53636CSB TN b 53636CSB 40 6.6 $ 617 $ 632 $1372 $150942"W x 42"W TN54242CSB TN b 54242CSB 46 8.4 $ 667 $ 681 $$1633 $179648"W x 48"W TN54848CSB TN b 54848CSB 53 10.3 $ 725 $ 739 $1879 $20671st Option:Laminate orVeneer Typeand Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Examples: TT53636CSA.TM41.E9.2nd Option:Edge Trim Color(Laminate only):See inside front coverfor finishes.E .TV54242CAS.NC5113rd Option:Paint (for 2.6Top Cap only):See inside frontcover for finishes.Stratawood VeneerGrain DirectionNatural VeneerGrain Direction192 | Systems Supplement – 3/2013P

WorksurfacesCorner Shelf• Includes support brackets.• Wave-shaped edge, if selected, comes on frontleading edge, sides and back are flat.• Veneer shelves by Gunlocke featuring theClearTech ® finish system.• Stratawood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.Corner ShelfLaminate and VeneerGSA SIN 711-1For specification details refer to:Working with Worksurfaces, pages 164-167TERRACEStratawood Veneer Grain DirectionNatural Veneer Grain DirectionHow to specify —Select theModel Numberfrom above.PrefixT Laminate w/FlatTW Laminate w/WaveTV VeneerT .Laminate Wave Edge “W” Laminate Laminate Veneer Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1 V3Description Model Model Weight Cubes List Price List Price List Price List PriceCorner Shelf (includes support brackets — specify paint)36"W x 36"W x 11"D T53636CS T b 53636CS 38 3.2 $ 491 $ 469 $1251 $137142"W x 42"W x 11"D T54242CS T b 54242CS 46 4.0 $ 514 $ 489 $1348 $16241st Option:Paint:For supportbrackets.See inside frontcover for finishes.P .2nd Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for Natural 1Examples: T53636CS.P27.LT3B.E9 TW53636CS.P27.LT3B.E9 TV53636CS.P27.NE800Systems Supplement – 3/2013 allsteeloffice.com | 193.3rd Option:Edge Trim Color(Laminate only):See inside frontcover for finishes.ETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesEnd-Panel Support• Includes End-Panel (non-handed), attachinghardware and adjustable glides. (Panel-Mountversion includes Panel Mount Bracket.)• End panels are 1 5 ⁄8" thick.• See page 198 for alternative worksurfacesupports.In-line Support Leg• Includes In-line Support Leg (non-handed),attaching hardware, adjustable glides, andwire management grommet. (Panel-Mountversion includes Panel Mount Brackets.)• In-line support legs are 1 5 ⁄8" thick. Legportion is 12 3 ⁄4"D.End-Panel BracketSelect theModel Numberfrom above.Support LegBracketHow to specify —T .Panel Mount Brackets• Includes hardware to convert freestandingend-panels and in-line support legs to panelmount.• Non-handed.Support Column• Includes column, worksurface bracket kitT6BK, attaching hardware and adjustableglides.Worksurface Supports / Desk ComponentsOff-Modular End Panel /In-line Support Leg Bracket• Non-handed.• Allows in-line support legs and end-panels tobe attached off-module.• Cannot be used closer than 12" from end ofpanel.ShipSelectDescription Model Weight Cubes List Price List PriceEnd-Panel Supports — for Terrace 3.4/2.629 1 ⁄2"H x 10"D Freestanding T61029FEN 19 0.6 $ 195 $ 21329 1 ⁄2"H x 24"D Freestanding T62429FEN 26 2.0 $ 211 $ 22929 1 ⁄2"H x 30"D Freestanding T63029FEN 33 2.6 $ 224 $ 24229 1 ⁄2"H x 10"D Panel-Mount T61029PEN 19 0.6 $ 218 $ 23629 1 ⁄2"H x 24"D Panel-Mount T62429PEN 26 2.0 $ 233 $ 25129 1 ⁄2"H x 30"D Panel-Mount T63029PEN 33 2.6 $ 244 $ 262In-line Support Legs — for Terrace 3.4/2.629 1 ⁄2"H to support 24"D Freestanding T62429SLF 23 S 0.6 $ 188 $ 20629 1 ⁄2"H to support 30"D Freestanding T63029SLF 23 S 0.6 $ 202 $ 22029 1 ⁄2"H to support 24"D Panel-Mount T62429SLP 25 0.6 $ 211 $ 22929 1 ⁄2"H to support 30"D Panel-Mount T63029SLP 25 0.6 $ 224 $ 242Panel-Mount End-Panel Brackets — for Terrace 3.4/2.629 1 ⁄2"H T6PEN 4 0.4 $ 40 $ 58Off-Modular End-Panel/In-line Support Leg Bracket — for Terrace 3.4 onlyOne — non-handed T6EPK 1 S 0.1 $ 33 $ 51Support Columns29 1 ⁄2"H / 3" Diameter TT629SC 13 S 1.1 $ 143 $ 17228 1 ⁄2"H / 3" Diameter TT628SC 13 S 1.1 $ 143 $ 172Support Column — Height-AdjustableFor 26 1 ⁄2" to 29 1 ⁄2"H – 3" Diameter TWSC-29 11 S .4 $ 401 $ 4301st Option:Paint:See inside frontcover for finishes.PExample: T62429FEN.P02For specification details refer to:Working with Worksurfaces, pages 164-167Shippable by small-package carrier.194 | Systems Supplement – 3/2013SGSA SIN 711-1

WorksurfacesTerrace Cantilever Brackets (handed)• Cantilever support. Handed for left- orright-hand applications.• No assembly required.• 24"D accommodates 24" and 30"Dworksurfaces.• 12"D only for use with 12"D worksurfaces.• Includes tie bracket and attachmenthardware.• Shared applications require both left- andright-hand brackets.Cantilever Bracket (non-handed)• Cantilever support.• Angle brackets (2), assembly required.• Attachment hardware included.How to specify —Select theModel Numberfrom above.T .Cantilever Bracket — TerraceWorksurface Supports / Desk ComponentsShipSelectDescription Model Weight Cubes List Price List Price12"D Left-Hand T6CB12L 7 S 0.6 $ 39 $ 4812"D Right-Hand T6CB12R 7 S 0.6 $ 39 $ 4824" or 30"D Left-Hand T6CB24L 7 S 0.6 $ 48 $ 5724" or 30"D Right-Hand T6CB24R 7 S 0.6 $ 48 $ 57Cantilever Bracket (non-handed)24" or 30" T624CB 7.5 S 0.5 $ 119 N/AWorksurface Bracket KitOne pair T6BK 1 S 0.1 $ 40 $ 48NOTE: Cannot be used with 30"H frames.Worksurface Storage Bracket Kit (Black only)One Pair T6SB 1 S 0.1 $ 56 N/AOff-Module Worksurface Bracket Kit for mounting 29 1 ⁄2"H worksurfaces (Black only) — for Terrace 3.4 onlyOne kit TT6MK 2 S 0.3 $ 74 N/AFlat Brackets (no color option)For 12"D T612FB 3 S 0.2 $ 35 N/AFor 24"D T624FB 3 S 0.2 $ 40 N/AFor 30"D T630FB 3 S 0.2 $ 47 N/APedestal-to-Panel Attachment Bracket for Terrace 3.4/2.6Left-handed T6PPKL 3 S 0.4 $ 67 $ 78Right-handed T6PPKR 3 S 0.4 $ 67 $ 781st Option:Paint(if applicable):See inside frontcover for finishes.PWorksurface Bracket Kit — T6BK• Brackets — one pair.• Attachment hardware included.Worksurface Bracket — T6SB• Worksurface Storage Bracket Kit (T6SB) isused for aesthetics where under-desk storageis immediately adjacent to the return panel. Inall other applications use WorksurfaceBracket Kit (T6BK) to utilize worksurfacethreaded metal inserts.• Brackets — one pair. Black only.• Attachment hardware included.• Brackets do not align with worksurfacethreaded metal inserts, and therefore, requirewood screws (included).Off-Module Work surface Bracket Kit• Worksurface brackets (2).Examples: T6BK.P02 T6SB TT6MKFor specification details refer to:Working with Worksurfaces, pages 164-167• Worksurface bracket kit (T6BK).• Attaching hardware.• Requires tiles to be segmented at worksurfaceheight.Flat Brackets• Bracket and attaching hardware.Pedestal-to-Panel Attachment Bracket• Can be used with pedestal in place of FullEnd-Panel or return panel.• Provides structural support to panel run bysecuring panel directly to pedestal.• Is compatible with Persona and Essentialspedestals.Systems Supplement – 3/2013 allsteeloffice.com | 195SGSA SIN 711-1Shippable by small-package carrier.TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesCorner Desk Leg• Includes attaching hardware.• Attaching modesty panels should be 6" lessthan width of worksurface.Desk-to-Panel Attachment Kit• Includes left and right modesty panelbrackets, left and right worksurface brackets,and attaching hardware.• Non-handed.• Kits are not compatible with 30"HTerrace 3.4 panels.How to specify —Select theModel Numberfrom above.T .Bridge Kit• Includes 2 gussets, light gaps, 2 flat bracketsand attaching hardware.Return Kit• Includes gusset, light gaps, flat bracket andattaching hardware.Worksurface Supports / Desk ComponentsShipSelectDescription Model Weight Cubes List Price List PriceCorner Desk Leg for Terrace Freestanding29 1 ⁄2"H x 6" x 6" T629CLD 5 S 0.6 $ 125 $ 143Desk-to-Panel Attachment Kit for Terrace Freestanding29 1 ⁄2"H T6DP 5 S 0.5 $ 64 $ 82Bridge Kits for Terrace FreestandingHalf-Height Modesty Bridge Kit T6HHBK 10 S 0.8 $ 141 $ 159Full-Height Modesty Bridge Kit T6FHBK 10 S 0.8 $ 152 $ 170Return Kits for Terrace FreestandingHalf-Height Modesty Return Kit T6HHRK 7 S 0.8 $ 74 $ 92Full-Height Modesty Return Kit T6FHRK 7 S 0.8 $ 81 $ 991st Option:Paint:See inside frontcover for finishes.PExample: T629CLD.P02For specification details refer to:Working with Terrace Desking, pages 199-204Shippable by small-package carrier.196 | Systems Supplement – 3/2013SGSA SIN 711-1

WorksurfacesModesty Panels and GussetModesty Panel• Caps over back of support leg.• Includes attaching hardware.• Specify modesty panel width to be the sameas worksurface width, except when used witha corner desk leg only where width ofmodesty panel should be 6" less than widthof worksurface.Gusset• Allows easy access to wall outlets.• Can be used to support desk shells that are36"W to 60"W.• Cannot be used with suspended pedestals orcorner desk legs.• 13" x 13".Universal Modesty Panel• Mounts under Peninsula, Bullet P-Top, Jetty,and Boomerang worksurfaces.• Does not provide electrical, data or structuralsupport.GSA SIN 711-1For specification details refer to:Working with Terrace Desking, pages 199-204• Only requires attachment to the worksurface.• Steel panel is 1 1 ⁄2" thick x 8 1 ⁄2"H and can bemounted at various distances from edge ofworksurface based on user’s preference forclearance and conferencing requirements.TERRACEHow to specify —Select theModel Numberfrom above.ShipSelectDescription Model Weight Cubes List Price List Price29 1 ⁄2"H Modesty Panels for Terrace Freestanding24"W T62924MPD 10 S 0.6 $ 183 $ 20130"W T62930MPD 12 S 0.7 $ 185 $ 20336"W T62936MPD 15 S 0.8 $ 187 $ 20542"W T62942MPD 18 S 0.9 $ 190 $ 20848"W T62948MPD 21 S 1.0 $ 195 $ 21354"W T62954MPD 24 S 1.1 $ 201 $ 21960"W T62960MPD 26 1.2 $ 208 $ 22666"W T62966MPD 29 1.3 $ 214 $ 23272"W T62972MPD 32 1.4 $ 219 $ 23716"H Modesty Panels for Terrace Freestanding24"W T61624MPD 5 S 0.6 $ 175 $ 19330"W T61630MPD 6 S 0.7 $ 178 $ 19636"W T61636MPD 8 S 0.8 $ 180 $ 19842"W T61642MPD 9 S 0.9 $ 184 $ 20248"W T61648MPD 10 S 1.0 $ 188 $ 20654"W T61654MPD 12 S 1.1 $ 193 $ 21160"W T61660MPD 14 1.2 $ 200 $ 21866"W T61666MPD 15 1.3 $ 207 $ 22572"W T61672MPD 16 1.4 $ 212 $ 230Gussets for Terrace FreestandingOne pair T6DG 7 S 0.6 $ 102 $ 120ShipDescription Model Weight Cubes List PriceUniversal Modesty Panels41"W for use on 60"L Peninsula worksurfaces PMP41 9 S 1.3 $ 18947"W for use on 66"L Peninsula orJetty worksurfaces; and 72"L P-Top worksurfaces PMP47 10 S 1.4 $ 19353"W for use on 72"L Peninsula, Jetty orBoomerang worksurfaces PMP53 11 S 1.6 $ 198.1st Option:Paint:See inside frontcover for finishes.PExamples: T62924MPD.P02 T6DG.P02 PMP41.P27Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 197STERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEWorksurfacesEnd Panel Supports• End panels include attaching hardware andleveling glides.• Leveling glides provide 2 1 ⁄4" of adjustment.How to specify —Select theModel Numberfrom above.A .1st Option:Paint:See inside frontcover for finishes.For Select Paints —add $29.PExample: ATBHEP1229.P28• End panels are universal shared with a leftandright-hand attachment bracket.• End panels cannot be used for in-linejunctions and are only used at the end of apanel run.• When using with Adept refer to the AdeptPricer for specification details.Worksurface SupportsGSA SIN 711-1In-line Support Legs• Used to support 24"D worksurfaces only in ashared position.• When using with Adept refer to the AdeptPricer for specification details.ShipDescription Model Weight Cubes List PriceTerrace 3.4/2.6 Open End Panel Supports12"D x 29 1 ⁄2"H Panel-Mounted ATBHEP1229 7 S 0.6 $ 15124"D x 29 1 ⁄2"H Panel-Mounted ATBHEP2429 11 S 1.2 $ 15930"D x 29 1 ⁄2"H Panel-Mounted ATBHEP3029 15 S 1.8 $ 173Terrace 3.4/2.6 Closed End Panel Supports12"D x 29 1 ⁄2"H Panel-Mounted ATBFEP1229 8 S 0.6 $ 15424"D x 29 1 ⁄2"H Panel-Mounted ATBFEP2429 12 S 1.2 $ 16930"D x 29 1 ⁄2"H Panel-Mounted ATBFEP3029 16 S 1.8 $ 182Terrace 3.4/2.6 In-line Support Legs29 1 ⁄2"H for 24"D Panel-Mounted Worksurfaces ATBSL1229 9 S 0.6 $ 151Shippable by small-package carrier.198 | Systems Supplement – 3/2013S

WorksurfacesTerrace ® Wall Track KitsTerrace Wall Track for 3.4/2.6• Allows for mounting of system panelcomponents on permanent wall structures.• One pair. Each track has a single row of slots.• Height of wall tracks coordinate with 69"Hpanel height. Field cut for lower heights.• No dimension creep when mountedside-by-side to hang or mount components.• When used with 3.4 Tile Attachment Kit,width of wall tracks equal panel widths.• Wall track will add 1" to depth of attachedcomponents.How to specify —Select theModel Numberfrom above.TWT .Wall Track Tile Attachment Kit• Allows mounting of Terrace 3.4 tiles(including Tool Tiles) to wall track segments.• Attachment kit consists of 3 segmentmembers and 1 horizontal beltline member.One attachment kit is required per pair ofTWTS. Only Terrace 3.4 Tiles will functionwith Wall Track System.Wall Track Tile Segment Kit• Segment Kit consists of 2 horizontalmembers — allows for additional tilesegmentation.Ship Core SelectDescription Model Weight Cubes List Price List PriceTerrace Wall Track (pair) — for Terrace 3.4/2.669"H Track TWTS 19.1 S 1.1 $ 159 pr. $ 168 pr.Wall Track Tile Attachment Kits — for Terrace 3.4 Tiles24"W TWTTAK24 5.8 S 0.4 $ 217 $ 22630"W TWTTAK30 6.9 S 0.6 $ 224 $ 23336"W TWTTAK36 8.1 S 0.6 $ 242 $ 25142"W TWTTAK42 9.4 S 0.6 $ 269 $ 27848"W TWTTAK48 10.5 S 0.9 $ 291 $ 30060"W TWTTAK60 13.0 S 1.1 $ 314 $ 323Wall Track Tile Segment Kits — for Terrace 3.4 Tiles24"W TWTTAK24S 2.9 S 0.7 $ 112 $ 12130"W TWTTAK30S 2.9 S 0.7 $ 115 $ 12436"W TWTTAK36S 3.5 S 0.7 $ 126 $ 13542"W TWTTAK42S 4.1 S 0.7 $ 138 $ 14748"W TWTTAK48S 4.6 S 0.9 $ 155 $ 16460"W TWTTAK60S 5.8 S 1.1 $ 169 $ 1781st Option:Paint:See inside frontcover for finishes.PExample: TWTTAK48.P02NOTE: If using in conjunction withTerrace frames, we recommend usingBlack as the paint color so that revealswill match.Systems Supplement – 3/2013 allsteeloffice.com | 199SGSA SIN 711-1Terrace Wall Trackwith Wall TrackTile Attachment Kit.Shippable by small-package carrier.TERRACETERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDING

FREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACETerrace ® 3.4/2.6Freestanding desks can becreated by assembling Terraceworksurfaces, supports,modesty panels and brackets.These can be treated asextensions of the panel run,or be used inde pendently foropen office areas. Theirflexible design makes itpossible to support virtuallyany office function, while theirvisual style allows you tomain tain aestheticcompatibility with Terracepanels and compo nents. Allcomponents are orderedseparately, using the guidelinesset forth on the followingpages.Freestanding DeskFreestanding DeskEMSWorksurface(S)Modesty panels mount toend-panel supports, supportlegs, corner desk legs, desk-topanelattachment kits andmodesty panel attachmentkits. Use 16"H modestypanels for increased air flowand wall access forreceptacles.Gussets may be used inplace of a modesty panel on60"W and smallerworksurfaces for maximumwall access.Note: A modesty panel (orgussets) is required to providestructural stability on allfreestanding desks. Attachinghardware included withmodesty panel.End-PanelSupport(E)1 2EIn-LineSupportLeg(L)Samewidth asWorksurface(M)Modesty PanelWorking with Terrace FreestandingCorner desk leg connectstwo modesty panels at therear of a corner desk. Leg is6"W x 6"W which reducesattaching modesty panelwidths to 6" less thanattaching worksurfacedimension. A leveling glideprovides 3" of verticaladjustment.6" lessthanWorksurface(M –6)BridgeKit(B)Deskto-PanelAttachmentKit(D)Panel-Attached Desk 1 11 11Panel-Attached DeskEMSCornerDeskLeg(C)Desk-to-panel attachmentkit connects a worksurfaceand modesty panelperpendicularly to anyTerrace panel. Opposing endsof worksurface and modestypanel must be supported withan end-panel support orattached as a return desk froma primary desk. Order anoff-module worksurfacebracket kit TT6MK to connecta worksurface and modestypanel perpendicularly to anyTerrace 3.4 panel wider thanthe worksurface depth.Off-module kits require tiles tobe segmented at worksurfaceheight.DDReturnKit(R)GSA SIN 711-1200 | Systems Supplement – 3/2013

Terrace ® 3.4/2.6Working with Terrace FreestandingReturn Desk (Attached to a primary or return desk.)SGSA SIN 711-1TERRACEMConfigurationOptionsBoth desks at acommon height (shown)Worksurface(S)End-PanelSupport(E)1 1In-LineSupportLeg(L)Return Desk (Attached to a panel-hung worksurface.)ConfigurationOptionsReturn desk andpanel-hung worksurfaceat a common height (shown)Worksurface(S)EEnd-PanelSupport(E)1 1In-LineSupportLeg(L)1Samewidth asWorksurface(M)Modesty Panel6" lessthanWorksurface(M–6)BridgeKit(B)Deskto-PanelAttachmentKit(D)CornerDeskLeg(C)ReturnKit(R)1 1Samewidth asWorksurface(M)1RLModesty Panel6" lessthanWorksurface(M–6)SBridgeKit(B)MEDeskto-PanelAttachmentKit(D)CornerDeskLeg(C)ReturnKit(R)TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 201

Terrace ® 3.4/2.6Working with Terrace FreestandingFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACECorner Desk (Corner unit must be configured between adjacent desks of equal height.)NOTE: Item “S” (Cove Worksurfacesfunction the same as Corner Worksurfaces.)ConfigurationOptionsBoth desks and worksurfaceat a common height (shown)*Worksurface(S)End-PanelSupport(E)In-LineSupportLeg(L)Samewidth asWorksurface(M)Modesty Panel6" lessthanWorksurface(M–6)BridgeKit(B)Deskto-PanelAttachmentKit(D)CornerDeskLeg(C)3 2 2 2 21Worksurface(S)2MCorner Desk (Attached to a panel with an adjacent desk at one side.)EEnd-PanelSupport(E)SM–6In-LineSupportLeg(L)LCSamewidth asWorksurface(M)DModesty Panel6" lessthanWorksurface(M–6)BridgeKit(B)Deskto-PanelAttachmentKit(D)1 121SM–6MSLLSMSEECornerDeskLeg(C)ReturnKit(R)NOTE: Item “S” (Cove Worksurfacesfunction the same as Corner Worksurfaces.)MReturnLeg(R)GSA SIN 711-1202 | Systems Supplement – 3/2013

Terrace ® 3.4/2.6Working with Terrace FreestandingBridge Desk (Attached between two primary desks.)SGSA SIN 711-1TERRACEMConfigurationOptionsAll desks of acommon height (shown)ConfigurationOptionsAll desks of acommon height (shown)Worksurface(S)End-PanelSupport(E)In-LineSupportLeg(L)Samewidth asWorksurface(M)Modesty Panel6" lessthanWorksurface(M–6)BridgeKit(B)1 1 1Worksurface(S)End-PanelSupport(E)In-LineSupportLeg(L)Samewidth asWorksurface(M)Modesty Panel6" lessthanWorksurface(M–6)BridgeKit(B)Deskto-PanelAttachmentKit(D)Deskto-PanelAttachmentKit(D)CornerDeskLeg(C)Bridge Desk (Between a corner desk and a primary desk. Bridge desk must be the same height as the corner desk.)LBMSCornerDeskLeg(C)1 1 11BRReturnLeg(R)ReturnKit(R)TERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 203

Terrace ® 3.4/2.6Working with Terrace FreestandingFREESTANDING WORKSURFACESELECTRICALTERRACE 2.6TERRACE 3.4TERRACEBridge Desk (Between a panel-hung worksurface and a primary desk.)ConfigurationOptionsBoth desks and worksurfaceof a common height (shown)Worksurface(S)End-PanelSupport(E)In-LineSupportLeg(L)Bridge Desk (Between two panel-hung worksurfaces.)ConfigurationOptionsDesk and both worksurfacesat a common height (shown)LSamewidth asWorksurface(M)Modesty Panel6" lessthanWorksurface(M–6)BridgeKit(B)Deskto-PanelAttachmentKit(D)CornerDeskLeg(C)1 111Worksurface(S)End-PanelSupport(E)In-LineSupportLeg(L)Samewidth asWorksurface(M)1 21LMSMModesty PanelS6" lessthanWorksurface(M–6)RBridgeKit(B)LDeskto-PanelAttachmentKit(D)CornerDeskLeg(C)ReturnKit(R)ReturnKit(R)GSA SIN 711-1204 | Systems Supplement – 3/2013

Terrace ® 3.4/2.6Working with Wave-Shaped Edge WorksurfacesFreestanding “U” Desk — With Wave-Shaped WorksurfacesGSA SIN 711-1TERRACESSConfigurationOptionsWorksurfaces at acommon height (shown)Worksurface(S)Flat Edge or Veneer WorksurfacesEEnd-PanelSupport(E)In-LineSupportLeg(L)Samewidth asWorksurface(M)Modesty Panel6" lessthanWorksurface(M–6)Terrace Freestanding StationMarch 2013 — Fabric Grade 1 and Wave-Shaped Edge WorksurfacesM–6CSCLine Product Model List ExtendedItem Description Qty Number Price Price1 Boomerang Worksurface 110 Degree – Left 36" x 72" x 24" 1 TW547221BL $ 984 $ 9842 Corner Cove Worksurface – Left 72" x 48" x 24" x 24" 1 TW5722EL 752 7523 Modesty Panel 30"W x 29 1 ⁄2"H 1 T62930MPD 185 1854 Modesty Panel 42"W x 29 1 ⁄2"H 1 T62942MPD 190 1905 Modesty Panel 66"W x 29 1 ⁄2"H 1 T62966MPD 214 2146 Corner Leg 29 1 ⁄2"H x 6" x 6" 1 T629CLD 125 1257 Freestanding End Panel Support 10"D x 29 1 ⁄2"H 1 T61029FEN 195 1958 Freestanding End Panel Support 24"D x 29 1 ⁄2"H 1 T62429FEN 211 2119 Freestanding Support Leg 24"D x 29 1 ⁄2"H 1 T62429SLF 188 18810 Support Column 29 1 ⁄2"H 1 TT629SC 143 14311 Persona Stack On Hutch w/Mesh Doors 1 T872HMN 1,252 1,25212 Tackboard for Stack On 1 862072 362 36213 Tasklight for 60"W 1 870860 256 25614 Persona Freestanding Pedestal BBF 23 3 ⁄8"D x 28 1 ⁄8"H 1 TSPIB-243A 910 910TOTAL $ 5,967M–6BridgeKit(B)Deskto-PanelAttachmentKit(D)CornerDeskLeg(C)ReturnKit(R)2 2 13* 11Wave-Shaped Edge WorksurfacesLMor*M–6E*NOTE: When specifyingWave-shaped edge on: Bullet,P-Shaped, Jetty, Boomerang, and Reefworksurfaces, modesty panel needs tobe M-6 (6" less than width ofworksurface). For Flat Edge andVeneer worksurfaces, modesty is M(same width as worksurface).Examples of each are shown below.SupportColumn(SC)NOTE: Stack-on Hutch needs to match width ofworksurface to allow attachment hardware to wrapworksurface.For maximum storage on Terrace Freestanding,match pedestal depths to worksurface depth:24"D worksurface accepts pedestals to 23 3 ⁄8"D30"D worksurface accepts pedestals to 29 3 ⁄8"DTERRACE 3.4 TERRACE 2.6 ELECTRICAL WORKSURFACES FREESTANDINGSystems Supplement – 3/2013 allsteeloffice.com | 205

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESOverheads & ShelvesFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitPersona offers metal cabinets with painted, steel meshor fabric covered fronts. Align offers metal cabinetswith painted, veneer, or landscape fronts and veneercabinets with veneer or landscape fronts.Provides a wide variety of aesthetic and cost optionsto meet the diverse needs of the customer.Align overheads are available with flat flipper front,radius flipper front, or hinged doors.Provides the customer with a variety of overheaddoor options.Landscape fronts are offered on Align hinged dooroverheads.Designer has the choice of allowing the cabinet tocoordinate with the rest of the workstation, blendwith certain materials, or serve as a strong designaccent.All metal case overheads feature concealed locks.Front surface of cabinet offers clean appearance.Option of omitting lock core.Ability to key alike in the field.Metal cabinets are full steel construction.Steel construction ensures long term durability andstrength of unit.All metal case overhead cabinets come standard withbackstop. Veneer case overhead and receding doormetal cabinets are fully enclosed.Protects panel fabric.All non-landscape cabinets and shelves are shippedfully assembled.Fully assembled cabinets and shelves shorteninstallation time and lower customer cost.FeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatures and BenefitsGSA Reference PagePersona radius door, Terrace Essentials flat door, andAlign overhead cabinets can be mounted off-module.Provides greater flexibility when configuringworkstations.Persona receding door overhead cabinets mount to asingle panel or two panels whose total width is equalto that of the cabinet.Ability to span panels with one storage cabinetfacilitates specification, reconfiguration, andinventory management.Persona and Align overhead cabinets can be orderedwith or without pull option.Pull coordinates with pedestals and laterals. No pulloverhead cabinets have a smooth look.Overhead storage cabinets come standard withanti-dislodgment feature.Ensures that the cabinets stay safely secured to thepanels.206 | Systems Supplement – 3/2013

Overheads & ShelvesOverview of Overheads and ShelvesGSA Reference PageNOTE: Terrace Overheads have unique model numbers with logic. Example: TP24RNAF stands for Terrace, Persona,24" Wide, Radius door, Non-assist, Arch pull, with Fabric front.Persona Overhead Storage CabinetsOVERHEADS & HUTCHESRadius DoorRadius Doorwith Arch PullEssentials Overhead Storage CabinetsFlat DoorMetal Case withVeneer Flipper DoorsFlat Doorwith Fabric FrontAlign Overhead Storage CabinetsRadius Mesh DoorRadius Doorwith Fabric FrontOpen BookshelfReceding Doorwith Recessed PullREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 207

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESOverheads & ShelvesOverhead storage components maximize the use of space inthe workstation and also provide convenient access to binders,reference materials, software packages and miscellaneoussupplies.Overhead storagecabinets can bepositioned verticallyin 1" increments.Locking clipfeature securesstorage cabinets topanels.Storage shelves featurequarter-round end panels.Locking clipfeature secures storageshelves to panels.Product dimensionsOverhead Storage CabinetWidth 24" (except receding door), 30", 36", 42", 48",60" (with 2 doors)Inside width 3 ⁄8" less than widthDepth 14 1 ⁄4" (Receding Door is 13 7 ⁄8"D)Inside depth 12 7 ⁄8" (Receding Door is 13"D)Height 16" (Receding Door is 15 1 ⁄8"H)Inside height 12 3 ⁄4" (Receding Door is 12"H)BookshelfWidth 24", 30", 36", 42", 48", 60"Depth 14 1 ⁄4"Height 8"Working with Persona and Essentials StorageBackstop keeps books, bindersand supplies from coming incontact with tile fabric.Finish options for Personadoor front include painted,steel mesh or fabric.Concealed core removable locksallow lateral files, center drawers,pedestals and overhead cabinetsto be keyed alike. Omit lock coreoption available.Optional shelf divider isinfinitely adjustable acrosswidth of storage shelf oroverhead storage cabinet.Task lights can be mountedbeneath storage shelves andover head storage cabinets.Additional panel hung andfreestanding lighting optionsare available.GSA Reference PageRetractable door foldsover top of cabinet.Optional arch pullavailable.Cord retainer clips fasteninto panel slots to anchorpower cords. Avail able inblack only. Clips are providedwith under-shelf mounted tasklights. Additional clips can bepurchased separately.208 | Systems Supplement – 3/2013

Overheads & ShelvesSpecification GuidelinesWorking with Overhead StorageGSA Reference PageOVERHEADS & HUTCHESIn a panel run, only two overhead storage cabinets or openstorage shelves are recommended per panel side. Do not suspendmore than one overhead storage unit per side from panels in apanel run which is mounted, at one or both ends, with anoff-module connector kit.When overhead storage units are suspended from stackingframes, the following guidelines should be adhered to:Stacking frames should be added to all the parent run panels,and to each return-panel run. Stacking panels added to returnpanel must match the parent run configuration.A maximum of two overhead storage units should besuspended from each side of stacking frames on any given panel.With Concensys, a full height panel end cover is required foradequate stability when using overhead storage on the end of arun, or on a return panel.Overhead storage cabinets and open storage shelves can bemounted on Terrace 2.6 and Terrace 3.4 structural and stackingpanels to a maximum height of 69" (above left). They may beplaced up to the top level of 82"H Terrace 3.4 structural panels(above right).No limitation to the numberof units on structural frameswhen run is supported withreturn panels on each side ofstorage shelves or overheadstorage cabinets.Storage shelf and recedingdoor overhead width mustcorrespond with width ofpanel(s). It is possible to spantwo panels when combinedpanel width equals cabinet orshelf width.Persona Radius, TerraceEssentials, and Align MetalOverhead Cabinets can bemounted on a panel equal toor up to 18" narrower thancabinet, or on panels widerthan the overhead cabinetwhen using off-module kit.One side of overhead must beheld on module.Access to beltline pathwaymust be considered whenspecifying overhead storage.(Applicable to Terrace 3.4 only.)Adequate clear space must beallowed when using AccessMechanism — the mechanismraises the tile 6". (Applicableto Terrace 3.4 only.)Weight Limits:Flipper Door Overheads:24"W...................................59 lbs.30"W...................................74 lbs.36"W...................................90 lbs.42"W.................................105 lbs.48"W.................................121 lbs.60"W.................................152 lbs.Receding Door Overheads:30"W...................................75 lbs.36"W...................................90 lbs.42"W.................................106 lbs.48"W.................................121 lbs.60"W.................................153 lbs.Open Shelf:24"W...................................61 lbs.30"W...................................77 lbs.36"W...................................93 lbs.42"W.................................108 lbs.48"W.................................124 lbs.60"W.................................155 lbs.REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 209

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESOverheadsfor Terrace ® 3.4/2.6Persona Overhead Storage Cabinetfor Terrace:• Available in standard painted door or steelmesh painted door.• “Easy-Assist” flipper door optional —requires minimal assistance in opening andclosing.• Steel cabinet with backstop.• Width can correspond with width of panel, or2 panels joined without a connector.• Persona radius cabinet can also be mountedon a panel equal to or up to 18" narrowerthan cabinet.• Steel constructed cabinet and door with noTerrace ModelsRadius DoorRadius Door with arch pullRadius Mesh DoorHow to specify —Select theModel Numberfrom above.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List Price1st Option:Pull:A Arch pull,add $29 per pullN No pull2nd Option:Paint:See inside frontcover for finishes.T . P .Example: TP48MEA.PR2.EL.STDPersona Overhead Cabinet with Radius Doorspull. Arch pull optional.• Self-engaging safety latch to secure cabinet topanel.• 60" cabinet has 2–30" doors with 2independent locks.• Accommodates recessed task lighting(specified separately). See page 222.• For locking specifications, see pages 340-342.• Easy-assist door not available on 60"Wcabinets — specify 2–30"W cabinets.• Cabinets are 14 1 ⁄4"D x 16"H.• Fabric front models on page 211.• Additional options are available for Terraceby ordering the overhead mounting kitbracket CEOMK listed on page 215 along3rd Option:Pull Color(if applicable):E4 BlackEL Matte SilverE .with any of the Align metal case overheads.Horizontal Wall Track• Allows for mounting Persona Radius orEssentials Overheads on permanent wallstructures ONLY.• NOT for mounting old style PersonaReceding Door units.• Track is 60"W and notched at 6" intervals asa guide for field cutting.• Available in black only.• Attachment hardwarenot included.Persona Radius Overhead Cabinets w/Painted Flipper Doors — 14 1 ⁄4"D x 16"H24"W TP24RN b 38 5.7 $ 646 $ 70330"W TP30RN b 38 5.7 $ 656 $ 71336"W TP36RN b 41 6.8 $ 683 $ 74042"W TP42RN b 46 7.8 $ 708 $ 76548"W TP48RN b 52 8.9 $ 732 $ 78960"W TP60RN b 62 11.2 $1014 $1071Persona Radius Overhead Cabinets w/“Easy-Assist” Painted Flipper Doors — 14 1 ⁄4"D x 16"H24"W TP24RE b 38 5.7 $ 825 $ 88230"W TP30RE b 38 5.7 $ 835 $ 89236"W TP36RE b 41 6.8 $ 862 $ 91942"W TP42RE b 46 7.8 $ 887 $ 94448"W TP48RE b 52 8.9 $ 911 $ 968Persona Radius Overhead Cabinets w/Mesh Painted Flipper Doors — 14 1 ⁄4"D x 16"H24"W TP24MN b 38 5.7 $ 707 $ 76430"W TP30MN b 38 5.7 $ 715 $ 77236"W TP36MN b 41 6.8 $ 742 $ 79942"W TP42MN b 46 7.8 $ 766 $ 82348"W TP48MN b 52 8.9 $ 791 $ 84860"W TP60MN b 62 11.2 $1129 $1186Persona Radius Overhead Cabinets w/“Easy-Assist” Mesh Painted Flipper Doors — 14 1 ⁄4"D x 16"H24"W TP24ME b 38 5.7 $ 886 $ 94330"W TP30ME b 38 5.7 $ 894 $ 95136"W TP36ME b 41 6.8 $ 921 $ 97842"W TP42ME b 46 7.8 $ 945 $100248"W TP48ME b 52 8.9 $ 970 $1027Horizontal Wall Track (Black only)60"W Tracks TWTH 5 S 0.8 $ 67 N/A4th Option:Lock:STD Standard —Random KeyedOMT Omit Lock Core(Deduct $16 perdoor)Shippable by small-package carrier.210 | Systems Supplement – 3/2013SGSA SIN 711-1Arch Pull

Overheadsfor Terrace ® 3.4/2.6• “Easy-Assist” flipper door optional —requires minimal assistance in opening andclosing.• Steel cabinet with backstop.• Width can correspond with width of panel, or2 panels joined without a connector.• Cabinet can be mounted on a panel equal toor up to 18" narrower than cabinet.Persona Overhead Cabinets with Radius Doors• Steel constructed cabinet and door with nopull. Arch pull optional.• Self-engaging safety latch to secure cabinet topanel.• 60" cabinet has 2–30" doors with2 independent locks.• Accommodates recessed task lighting(specified separately). See page 222.• For locking specifications, see pages 340-342.GSA SIN 711-1• Easy open door not available on 60"Wcabinets — specify 2–30"W cabinets.• Cabinets are 14 1 ⁄4"D x 16"H.• Additional options are available for Terraceby ordering the overhead mounting kitbracket CEOMK listed on page 215 alongwith any of the Alignmetal case overheads.OVERHEADS & HUTCHESOptional Arch PullTerrace ModelsRadius Doorwith Fabric FrontShown with arch pullHow to specify —Select theModel Numberfrom above.ShipCore Paint List PriceDescription Model Weight Cubes Grades 1/2 Grades 3/4 Grades 5/6Persona Radius Overhead Cabinets w/Fabric Front Flipper Doors — Core Paint24"W TP24RN b F 38 5.7 $ 713 $ 772 $ 89130"W TP30RN b F 38 5.7 $ 720 $ 779 $ 89836"W TP36RN b F 41 6.8 $ 749 $ 808 $ 92742"W TP42RN b F 46 7.8 $ 772 $ 831 $ 95048"W TP48RN b F 52 8.9 $ 797 $ 856 $ 97560"W TP60RN b F 62 11.2 $1142 $1259 $1498Persona Radius Overhead Cabinets w/”Easy-Assist” Fabric Front Flipper Doors — Core Paint24"W TP24RE b F 38 5.7 $ 892 $ 951 $107030"W TP30RE b F 38 5.7 $ 899 $ 958 $107736"W TP36RE b F 41 6.8 $ 928 $ 987 $110642"W TP42RE b F 46 7.8 $ 951 $1010 $112948"W TP48RE b F 52 8.9 $ 976 $1035 $1154ShipSelect Paint List PriceDescription Model Weight Cubes Grades 1/2 Grades 3/4 Grades 5/6Persona Radius Overhead Cabinets w/Fabric Front Flipper Doors — Select Paint24"W TP24RN b F 38 5.7 $ 770 $ 829 $ 94830"W TP30RN b F 38 5.7 $ 777 $ 836 $ 95536"W TP36RN b F 41 6.8 $ 806 $ 865 $ 98442"W TP42RN b F 46 7.8 $ 829 $ 888 $100748"W TP48RN b F 52 8.9 $ 854 $ 913 $103260"W TP60RN b F 62 11.2 $1199 $1316 $1555Persona Radius Overhead Cabinets w/”Easy-Assist” Fabric Front Flipper Doors — Select Paint24"W TP24RE b F 38 5.7 $ 949 $1008 $112730"W TP30RE b F 38 5.7 $ 956 $1015 $113436"W TP36RE b F 41 6.8 $ 985 $1044 $116342"W TP42RE b F 46 7.8 $1008 $1067 $118648"W TP48RE b F 52 8.9 $1033 $1092 $12111st Option:Pull:A Arch pull,add $29per pullN No pull2nd Option:FabricFront:Add F for FabricFront3rd Option:Paint:See inside frontcover for finishes.TP R F . P .Example: TP24RNAF.PR2.GL9M1.EL.STD4th Option:Fabric(if applicable):Limited fabric offeringavailable — see insideback cover for details.5th Option:Pull Color(if applicable):E4 BlackEL Matte SilverE .6th Option:Lock:STDStandard – RandomKeyedOMTOmit Lock Core(Deduct $16 per door)Systems Supplement – 3/2013 allsteeloffice.com | 211.REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESOverheadsfor Terrace ® 3.4/2.6Persona Overhead Cabinets withReceding Door• Fully enclosed steel cabinet with door fullyreceding below top surface allowing articlesto be placed on top of cabinet.• Includes full back.• Width must correspond with width of panel,or 2 panels joined together (cabinet will spanmore than one panel).• Steel constructed cabinet and door withIntegral Pull style.• Self-engaging safety latch to secure cabinet topanel.Terrace ModelsReceding DoorHow to specify —Select theModel Numberfrom above.Persona Overhead Cabinet with Receding Door / Shelves• 60" cabinet has 2–30" doors with 2independent locks and two 30" pulls.• For locking specifications, see pages 340-342.• Accommodates recessed task lighting — seepage 222.• Cabinets are 13 7 ⁄8"D x 15 1 ⁄8"H with insidedimensions of 13"D x 12"H.• Additional options are available for Terraceby ordering the overhead mounting kitbracket CEOMK listed on page 215 alongwith any of the Align metal case overheads.6"H x 10 1 ⁄2"D 8030-000 D 12 S 0.130" Wide; For 30" or 60" Cabinets36" Wide; For 36" Cabinets42" Wide; For 42" Cabinets8032-3008032-3608032-420DDD789SSS0.70.70.748" Wide; For 48" Cabinets 8032-480 D 10 0.7GSA SIN 711-1Dividers• Constructed of painted steel.• Mount to divider mounting rail (8032) orcabinet half-backs.• Designed to work within storage cabinetswith receding door.Divider Mounting Rail• Constructed of painted steel.• Mounts within cabinet of equal size.• 60" cabinet requires two 30" mounting rails.• To be used with 8030 Shelf Dividers.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PricePersona Receding Door Overhead Cabinets w/Integral Pull and Locking Doors 13 7 ⁄8"D x 15 1 ⁄8"H30"W TP30CNI D 38 5.7D36"W TP36CNI D 41 6.8D42"W TP42CNI D 46 7.8D48"W TP48CNI D 52 8.9D60"W TP60CNI D 62 11.2DDividersDivider Mounting Rails1st Option:Paint:See inside frontcover for finishes.P .Example: TP30CNI.P4J.STD2nd Option:Lock(Overhead only):STD Standard —Random KeyedOMT Omit Lock Core(Deduct $16 perdoor)D Discontinued 8/1/2010S Shippable by small-package carrier.212 | Systems Supplement – 3/2013DDDDDDDDDDDDDDD

Overheadsfor Terrace ® 3.4/2.6• Storage cabinets have flat flipper doors withradius horizontal edges.• Width can correspond with width of panel, ortwo panels joined with a straight connector.• Terrace Essentials cabinet can also be mountedon a panel equal to or up to 18" narrower thancabinet.• Cabinet has backstop.Essentials Overhead Cabinets with Flat and Square Doors• When mounted at an outside “TEE”connection or at an Extended Straightconnection, there will be 2 1 ⁄4" between storageunits.• All units feature an anti-dislodgement device.• Standard with a factory-installed coreremovable lock located on the underside ofthe cabinet.• 60" units are one-piece cabinet with two doorsand two locks.GSA SIN 711-1• Accommodates recessed task lighting — seepage 222.• Storage Cabinets are shipped pre-assembled.• For locking specifications, see pages 340-342.• Cabinets are 14 3 ⁄8"D x 16"H with insidedimensions of 12 7 ⁄8"D x 14 1 ⁄8"H.• Additional options are available for Terraceby ordering the overhead mounting kitbracket CEOMK listed on page 215 alongwith any of the Align metal case overheads.OVERHEADS & HUTCHESTerrace ModelsFlat DoorFlat Door with fabric frontHow to specify —Select theModel Numberfrom above.Ship Core Paint Core Paint w/FabricDescription Model Weight Cubes List Price Grades 1/2 Grades 3/4 Grades 5/6Essentials Overhead Cabinets w/Flat Flipper Doors 14 1 ⁄4"D x 16"H24"W TE24FNN D33 S 5.5 DD D D30"W TE30FNN D38 S 5.7 DD D D36"W TE36FNN D41 S 6.8 DD D D42"W TE42FNN D46 S 7.8 DD D D48"W TE48FNN D52 S 8.9 DD D D60"W TE60FNN D62 11.2 DD D DShip Select Paint Select Paint w/FabricDescription Model Weight Cubes List Price Grades 1/2 Grades 3/4 Grades 5/6Essentials Overhead Cabinets w/Flat Flipper Doors 14 1 ⁄4"D x 16"H24"W TE24FNN D33 S 5.5 D30"W TE30FNN D38 S 5.7 D36"W TE36FNN D41 S 6.8 D42"W TE42FNN D46 S 7.8 D48"W TE48FNN D52 S 8.9 D60"W TE60FNN D62 11.2 DNOTE: Add suffix “F” to above models if the fabric door option is chosen. Example: TE24FNNF.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceEssentials Off-Modular Overhead Cabinets w/Square Flipper Doors and Lock — 14 3 ⁄8"D x 16"H24"W30"W36"W42"W48"WEO1624FD bEO1630FD bEO1636FD bEO1642FD bEO1648FD b3838414652SSSSS5.26.47.58.79.8$ 522$ 535$ 558$ 585$ 607$ 579$ 592$ 615$ 642$ 66460"W EO1660FD b 62 12.1 $ 888 $ 945.1st Option:Pull(if applicable):Add $29 per pull.A Arch PullS Square PullN No Pull2nd Option:Paint:See inside frontcover for finishes.P .3rd Option:Fabric Color(if applicable):Limited fabric offeringavailable — see insideback cover for details.Examples: TE24FNNF.P93.CS928.STD TE24FNN.P93.STD S Shippable by small-package carrier.Systems Supplement – 3/2013 EO1636FDS.P27.EL.STDallsteeloffice.com | 213.3rd Option:Pull Color(if applicable):Arch:E4 BlackEL Matte SilverSquare:EL Matte SilverEDDDDDDDDDDDDD Discontinued 8/1/20104th Option:Lock:STD Standard —RandomKeyedOMT Omit LockCore(Deduct $16per door)DDDDDDREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESShelvesfor Terrace ® 3.4/2.6Open Bookshelves for Terrace• Shelf with back stop.• Locking clips (2) standard.• Will accommodate recessed task lighting —see page 222.Shelf Divider• 6 dividers.• Does not work with Receding Door Cabinet.Terrace ModelsHow to specify —Select theModel Numberfrom above.T .Off-Module Mounting Kit forOverhead Storage• Allows for off-module mounting of TerraceEssentials (produced after 2/1/2004) orTerrace Persona radius front overheadsanywhere on Terrace 3.4 panel run.• Must be mounted from top of frame.• Can mount units back-to-back (effective8/2004).• Does not work with Receding Door units.Open BookshelvesShip Core Paint Select PaintDescription Model Weight Cubes List Price List PriceOpen Bookshelves 14 1 ⁄4"D x 8"H24"W T724S 13 S 2.5 $ 211 $ 22930"W T730S 15 S 3.1 $ 229 $ 24736"W T736S 16 S 3.7 $ 242 $ 26042"W T742S 17 S 4.2 $ 252 $ 27048"W T748S 18 S 4.8 $ 265 $ 28360"W T760S 20 6.0 $ 323 $ 341Shelf Dividers (For Overhead Flipper Door Cabinets and Shelves)Package of 6 T7DV 3 S 0.2 $ 76 $ 86Off-Module Mounting Kit for Overhead StorageTT8MK 4.1 S 0.4 $ 115 N/ANOTE: Cannot be used on Persona Receding Door units.For use on Terrace 3.4 only.1st Option:Paint:See inside frontcover for finishes.PExample: T724S.P4JFor specification details refer to:Working with Overhead Storage,pages 206-209Shippable by small-package carrier.214 | Systems Supplement – 3/2013SGSA SIN 711-1

Overheadsfor Terrace ® 3.4/2.6• Door fronts available in Cleargrain,Natural–1, or Natural–2 veneer.• Metal Case with veneer doors by Gunlocke.• 60"W flipper door cabinets have 2–30"Wdoors with 2 independent locks.• Hinged door units have 2 doors with one lockfor 24"-36"W cabinets, 4 doors with 2independent locks for 42"-60"W cabinets.• Hinged doors only available without pulls.Align Metal Overhead Cabinets w/Veneer Doors• Will accommodate recessed task lighting —ordered separately. See page 222.GSA SIN 711-1For specification details, refer to:Working with Overheads, pages 206-209OVERHEADS & HUTCHESTerrace ModelsHow to specify —Select theModel Numberfrom above.Cleargrain Natural–1 Natural–2Ship w/Core w/Select w/Core w/Select w/Core w/SelectDescription Model Weight Cubes List Price List Price List Price List Price List Price List PriceOverhead Cabinets w/Veneer Flipper Doors — Metal Case/Veneer Doors24"W TC24FW b 33 5.5 $ 927 $ 990 $ 972 $1035 $1031 $109430"W TC30FW b 38 5.7 $ 954 $1017 $1000 $1063 $1060 $112336"W TC36FW b 41 6.8 $ 983 $1046 $1031 $1094 $1091 $115442"W TC42FW b 46 7.8 $1011 $1074 $1060 $1123 $1121 $118448"W TC48FW b 52 8.9 $1039 $1102 $1089 $1152 $1152 $121560"W TC60FW b 62 11.2 $1334 $1397 $1400 $1464 $1485 $1548ADDITIONAL OPTIONS: The above Align overheads with veneer flipper doors are specific models created for use onTerrace panels. Additional Align overhead storage options for Terrace are available by using the overhead mounting kitbracket CEOMK listed below along with any of the Align metal case overheads in the Systems Specification and Pricebooks. Options include metal or veneer hinged doors and six different Landscape door options.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceOff-module Overhead Mounting KitCEOMK 1 S 0.5 $ 67 $ 771st Option:Pull(if applicable):(Add $29 per pull)A Arch PullS Square PullN No Pull.2nd Option:Paint:See inside frontcover for finishes..3rd Option:Veneer Typeand Finish:See inside frontcover for finishes.4th Option:Pull Color(if applicable):Arch:E4 BlackEL Matte SilverSquare:EL Matte SilverExamples: TC48FWA.PR3.NC215.E4.STDELS Shippable by small-package carrier.Systems Supplement – 3/2013 TC24HWN.PR3.NC215.OMT CEOMKallsteeloffice.com | 215..5th Option:Lock:STDStandard –Random KeyedOMTOmit Lock Core(Deduct $16 perlock)6th Option:Lock Color(if applicable):EL Matte SilverELREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESHutchesPersona Radius Stack-on Hutchesfor Terrace ® Freestanding GSA SIN 711-1• Top, shelf, sides and doors, easy to assemble.• Door has core removable lock on undersideof unit (60"W, 66"W and 72"W have 2 doorsand 2 pulls).• Two keys.• 2 attachment brackets.• Arch Pull optional.• Hutch height clearance of 20 1 ⁄4" forcomputers, etc.Terrace ModelsShown with Arch pullHow to specify —Select theModel Numberfrom above.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List Price1st Option:Pull:A Arch pull,add $29 per pullN No pull2nd Option:Fabric Front:Add F for FabricFront3rd Option:Paint:See inside frontcover for finishes.T8 H F . P .Example: T836HMA.P02.EL.STD• Order hutch to match width ofworksurface(s) it covers.• For locking specifications, see pages 340-342.• Available in standard painted door, SteelMesh or Fabric Front door.• Steel cabinet with full back panel.• Stack-on Hutches are shippedeasy-to-assemble.4th Option:Fabric(if applicable):Limited fabric offeringavailable — see insideback cover for details.T836HDAF.P02.CS918.EL.STD• Accommodates recessed task lighting(specified separately). See page 222.• Chicago Task Light cords cannot be routedthrough the Hutch End Panels, due to thelarge size of the fused plugs.Stack-on Hutch w/Painted Doors 14 5 ⁄8"D x 36 1 ⁄4"H36"W T836HD b 59 4.0 $ 742 $ 79942"W T842HD b 64 4.6 $ 765 $ 82248"W T848HD b 69 5.2 $ 789 $ 84660"W T860HD b 85 6.5 $1059 $111666"W T866HD b 90 7.1 $1082 $113972"W T872HD b 94 7.7 $1109 $1166Stack-on Hutch w/Mesh Painted Doors36"W T836HM b 59 4.0 $ 798 $ 85542"W T842HM b 64 4.6 $ 824 $ 88148"W T848HM b 69 5.2 $ 845 $ 90260"W T860HM b 85 6.5 $1174 $123166"W T866HM b 90 7.1 $1199 $125672"W T872HM b 94 7.7 $1222 $1279ShipPaint List PriceDescription Model Weight Cubes Grades 1/2 Grades 3/4 Grades 5/6Stack-on Hutch w/Fabric Front Doors — Core Paint 14 5 ⁄8"D x 36 1 ⁄4"H36"W T836HD b F 59 4.0 $ 805 $ 864 $ 98342"W T842HD b F 64 4.6 $ 830 $ 889 $100848"W T848HD b F 69 5.2 $ 852 $ 911 $103060"W T860HD b F 85 6.5 $1187 $1304 $154366"W T866HD b F 90 7.1 $1211 $1328 $156772"W T872HD b F 94 7.7 $1237 $1354 $1593Stack-on Hutch w/Fabric Front Doors — Select Paint36"W T836HD b F 59 4.0 $ 862 $ 921 $104042"W T842HD b F 64 4.6 $ 887 $ 946 $106548"W T848HD b F 69 5.2 $ 909 $ 968 $108760"W T860HD b F 85 6.5 $1244 $1361 $160066"W T866HD b F 90 7.1 $1268 $1385 $162472"W T872HD b F 94 7.7 $1294 $1411 $16505th Option:Pull Color:E4 BlackEL Matte SilverE .6th Option:Lock:STD Standard —RandomKeyedOMT Omit LockCore (Deduct$16 per door)216 | Systems Supplement – 3/2013.Optional Arch Pull

Hutchesfor Terrace ® Freestanding• Stack-on Hutches have flipper doors withradius horizontal edges.• Stack-on hutches with doors are standardwith a core removable lock (60"W, 66"Wand 72"W have two doors and two locks).• Two attachment brackets are standard.• Order hutch to match width ofworksurface(s) it covers.• 36 1 ⁄4"H stack-on hutches have a heightclearance of 20 1 ⁄4" for computers, etc.• Depth dimensions shown includes thicknessof door.• Stack-on hutches are shippedeasy-to-assemble.• Accommodates recessed task lighting(specified separately). See page 222.• For locking specifications, see pages 340-342.Essentials Stack-on HutchesGSA SIN 711-1OVERHEADS & HUTCHESTerrace ModelsHow to specify —Select theModel Numberfrom above.Ship Core Paint FabricDescription Model Weight Cubes List Price Grades 1/2 Grades 3/4 Grades 5/6Stack-on Hutch w/Doors and Lock 14 5 ⁄8"D x 36 1 ⁄4"H36"W T736HN D59 4.042"W T742HN D64 4.648"W T748HN D69 5.260"W T760HN D85 6.566"W T766HN D90 7.172"W T772HN D94 7.7Ship Select Paint FabricDescription Model Weight Cubes List Price Grades 1/2 Grades 3/4 Grades 5/6Stack-on Hutch w/Doors and Lock 14 5 ⁄8"D x 36 1 ⁄4"H36"W T736HN D59 4.042"W T742HN D64 4.648"W T748HN D69 5.260"W T760HN D85 6.566"W T766HN D90 7.172"W T772HN D94 7.7NOTE: Add suffix “F” to above models if the fabric door option is chosen. Example: T736HNF.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceEssentials Stack-on Hutch w/Square Flipper Doors and Lock — 14 5 ⁄8"D x 36 1 ⁄4"H36"W EH36FD b 59 4.7 $ 557 $ 61442"W EH42FD b 64 4.7 $ 583 $ 64048"W EH48FD b 69 4.7 $ 601 $ 65860"W EH60FD b 85 5.8 $ 853 $ 91066"W EH66FD b 90 6.3 $ 893 $ 95072"W EH72FD b 94 6.8 $ 936 $ 9931st Option:Pull(if applicable):Add $29 per pull.A Arch PullS Square PullN No Pull.2nd Option:Paint:See insidefront coverfor finishes.P .Example: T736HNF.P93.CS928.STD3rd Option:Pull Color(if applicable):Arch:E4 BlackEL Matte SilverSquare:EL Matte SilverE4th Option:Lock Type:STD StandardOMT Omit LockCore(Deduct$16 perdoor)Systems Supplement – 3/2013 allsteeloffice.com | 217DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD Discontinued 8/1/2010DDDDDDDDDDDDREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESHutchesfor Terrace ® FreestandingOpen Hutch• Open hutch accommodates all task lighting(specified separately). See page 222.• Chicago Task Light cords cannot be routedthrough the Hutch End Panels, due to thelarge size of the fused plugs.• Open hutches ship easy to assemble.Shelf and Dividers• Additional shelf and shelf dividers for usewith Essentials or Persona Stack-on Hutches.• Shelf can only be mounted below originalshelf in 1" increments.How to specify —Select theModel Numberfrom above.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceOpen Hutch 13 5 ⁄8"D x 36 1 ⁄4"H36"W 861736 38 3.9 $ 349 $ 40642"W 861742 43 4.4 $ 382 $ 43948"W 861748 48 5.2 $ 395 $ 45260"W 861760 55 6.5 $ 427 $ 48466"W 861766 67 7.1 $ 447 $ 50472"W 861772 78 7.7 $ 475 $ 532Additional Shelf for Stack-on or Open Shelf36"W 861236 11 S .5 $ 94 $ 11242"W 861242 13 S .7 $ 103 $ 12148"W 861248 15 S .9 $ 112 $ 13060"W 861260 17 S 1.0 $ 123 $ 14166"W 861266 19 S 1.1 $ 133 $ 15172"W 861272 20 S 1.2 $ 154 $ 172Shelf DividersTackboards• Use tackboard to close the back of stack-onor hutch below storage unit.• Due to width of fabric roll, 66" and 72"Wtackboards are available in Railroad Cut only.• Tackboards for use with Essentials or PersonaStack-on Hutches.Open Hutch and Stack-on Hutch AccessoriesGSA SIN 711-1Items on this page for use with both Essentialsand Persona Hutches.Package of 6 T7DV 3 S 0.2 $ 76 $ 86Core Paint List Price — Fabric Select Paint List Price — FabricShip Grades Grades Grades Grades Grades GradesDescription Model Weight Cubes 1/2 3/4 5/6 1/2 3/4 5/620"H Tackboards for Stack-on Hutches36"W Tackboard 862036 10 S 0.9 $ 255 $ 330 $ 458 $ 272 $ 347 $ 47542"W Tackboard 862042 14 S 1.1 $ 269 $ 347 $ 481 $ 286 $ 364 $ 49848"W Tackboard 862048 18 S 1.5 $ 293 $ 381 $ 525 $ 310 $ 398 $ 54260"W Tackboard 862060 22 S 1.9 $ 327 $ 424 $ 587 $ 344 $ 441 $ 60466"W Tackboard 862066 24 S 2.1 $ 344 $ 447 $ 619 $ 361 $ 464 $ 63672"W Tackboard 862072 26 S 2.3 $ 362 $ 472 $ 650 $ 379 $ 489 $ 6671st Option:Paint:See inside frontcover for finishes.. P .2nd Option:Fabric(Tackboard only):See inside backcover for fabrics.Examples: 861736.P93 862036.P93.GL9M9S Shippable by small-package carrier.218 | 862066.P93.GL9M9.RRSystems Supplement – 3/2013.3rd Option:Railroad Cut(Tackboard only):(Only applicableto 66" and 72" WFabric Tackboards.)RRFOR TACKBOARDS:Example shows a 36"W x 20"H tackboard.RAILROADEDUPPATTERNCUTUP

OverheadsUpmount Overhead Conversion Kit• Consists of two upmount brackets, full backpanel and required installation hardware.• Available in core and select colors.• Allows mounting of Overhead case up to 13"above height of panel.• Brackets require a clearance of 6 1 ⁄2" belowbottom of overhead cabinet.• Width must correspond with width of panel,or 2 panels joined directly inline.• Full back panel adds 1 ⁄2" to depth of overheadcase.• Full back panel only used when upmountingcabinet.• For use with all Persona and EssentialsOverhead cabinets (except Receding Doorunits on page 212) produced after February 1,2004.Upmount and Easy-Assist Retro KitsGSA SIN 711-1Persona Retro Kit• For use with Persona Radius doors only.• Retro kits cannot be interchanged betweenthe steel and mesh doors. Retro kits are basedon door weight.• Available in P27 (Black) only.OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceTerrace Upmount Kit for Overhead Cabinets24"W TP24UP 7 S .6 $ 122 $ 14030"W TP30UP 8 S .7 $ 128 $ 14636"W TP36UP 10 S .8 $ 133 $ 15142"W TP42UP 11 S .9 $ 138 $ 15648"W TP48UP 12 S 1.0 $ 145 $ 16360"W TP60UP 16 S 1.2 $ 156 $ 174ShipDescription Model Weight Cubes List PricePersona Steel and Fabric Covered Easy-Assist Retro Kit24"W PSEARK24 1 S 0.5 $ 28930"W PSEARK30 1 S 0.5 $ 28936"W PSEARK36 1 S 0.5 $ 28942"W PSEARK42 1 S 0.5 $ 28948"W PSEARK48 1 S 0.5 $ 289Persona Mesh Easy-Assist Retro Kit24"W PMEARK24 1 S 0.5 $ 28930"W PMEARK30 1 S 0.5 $ 28936"W PMEARK36 1 S 0.5 $ 28942"W PMEARK42 1 S 0.5 $ 28948"W PMEARK48 1 S 0.5 $ 289.1st Option:Paint:See inside frontcover for finishes.Easy-Assist Retro Kitavailable in P27 (Black)only.PExamples: TP24UP.P93PSEARK24.P27Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 219SREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESHutchesfor Align Desking and Terrace Freestanding• Top, shelf, sides and doors, easy to assemble.• Steel cabinet with full back panel.• Hutch clearance of 22" for computers, etc.• Door has core removable lock on undersideof unit (60"W, 66"W, and 72"W have2 doors and 2 pulls).• 2 attachment brackets.Align and TerraceModelsAlign and TerraceModelsHow to specify —Select theModel Numberfrom above.YHF• Order hutch to match width ofworksurface(s) it covers.• Accommodates recessed task lighting(specified separately).• Chicago Task Light cords cannot be routedthrough the Hutch End Panels, due to thelarge size of the fused plugs.• Tackboard available for back panel on page221.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceAlign Flipper Door Hutch — Metal Case/Metal Front — 14 5 ⁄8"D x 38 3 ⁄4"H36"W YH36F b 59 4.0 $ 754 $ 81342"W YH42F b 64 4.6 $ 787 $ 84648"W YH48F b 69 5.2 $ 814 $ 87360"W YH60F b 85 6.5 $1166 $122566"W YH66F b 90 7.1 $1223 $128272"W YH72F b 94 7.2 $1279 $1338Align Flipper Door Hutch — Metal Case/Veneer Front — 14 5 ⁄8"D x 38 3 ⁄4"HAlign Metal Case HutchesGSA SIN 711-2V1 V3 V5Ship w/Core w/Select w/Core w/Select w/Core w/SelectDescription Model Weight Cubes List Price List Price List Price List Price List Price List Price36"W YH36FW b 59 4.0 $1262 $1323 $1320 $1381 $1399 $146042"W YH42FW b 64 4.6 $1345 $1406 $1409 $1470 $1488 $154948"W YH48FW b 69 5.2 $1456 $1517 $1526 $1587 $1614 $167560"W YH60FW b 85 6.5 $2353 $2414 $2465 $2526 $2610 $267166"W YH66FW b 90 7.1 $2590 $2651 $2714 $2775 $2872 $293372"W YH72FW b 94 7.2 $2789 $2850 $2923 $2984 $3093 $31541st Option:Pull:(Add $29 per pull)A Arch PullS Square PullN No Pull.2nd Option:Paint:See inside frontcover for finishes.Examples: YH36FS.PR2.EL.STDEL.3rd Option:Veneer Typeand Finish(if applicable):See inside frontcover for finishes.YH36FWN.P01.RF357.OMT220 | Systems Supplement – 3/2013.4th Option:Pull Color(if applicable):Arch:E4 BlackEL Matte SilverSquare:EL Matte Silver.5th Option:Lock Type:Arch PullSTD StandardOMT Omit LockCore(Deduct$16 perlock)6th Option:Lock Color(if applicable):EL Matte SilverESquare Pull

Hutchesfor Align Desking and Terrace Freestanding• Use tackboard on back panel of stack-onbelow storage unit.• Due to width of fabric roll, 66"W and largertackboards are available in Railroad Cut only.• Additional fabrics grades 7-9 pricing for usewith COM materials is listed on page 345.Align Tackboards for HutchesFOR TACKBOARDS:Example shows a 36"W x 20"H tackboard.UPGSA SIN 711-2OVERHEADS & HUTCHESRAILROADEDUPPATTERNCUTHow to specify —Select theModel Numberfrom above.YTB .Core Paint List PriceShip Grade Grade Grade Grade Grade GradeDescription Model Weight Cubes 1 2 3 4 5 6Tackboards for Align Metal Case Hutches — 24"H36"W YTB2436 11 S 1 $ 278 $ 302 $ 370 $ 405 $ 522 $ 57242"W YTB2442 15 S 1.2 $ 295 $ 320 $ 392 $ 429 $ 549 $ 60348"W YTB2448 19 S 1.6 $ 318 $ 345 $ 422 $ 463 $ 594 $ 65260"W YTB2460 23 S 2 $ 355 $ 388 $ 474 $ 520 $ 666 $ 73066"W YTB2466 25 S 2.2 $ 375 $ 410 $ 499 $ 547 $ 828 $ 91072"W YTB2472 27 S 2.4 $ 392 $ 430 $ 526 $ 581 $ 975 $1072Select Paint List PriceShip Grade Grade Grade Grade Grade GradeDescription Model Weight Cubes 1 2 3 4 5 6Tackboards for Align Metal Case Hutches — 24"H36"W YTB2436 11 S 1 $ 300 $ 324 $ 392 $ 427 $ 544 $ 59442"W YTB2442 15 S 1.2 $ 317 $ 342 $ 414 $ 451 $ 571 $ 62548"W YTB2448 19 S 1.6 $ 340 $ 367 $ 444 $ 485 $ 616 $ 67460"W YTB2460 23 S 2 $ 377 $ 410 $ 496 $ 542 $ 688 $ 75266"W YTB2466 25 S 2.2 $ 397 $ 432 $ 521 $ 569 $ 850 $ 93272"W YTB2472 27 S 2.4 $ 414 $ 452 $ 548 $ 603 $ 997 $10941st Option:Paint:See inside frontcover for finishes.Example: YTB2436.PR2.CS928.2nd Option:Fabric(Tackboard only):See inside backcover for fabrics.Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 221.3rd Option:Railroad CutFabric:(Only available andrequired on 66"Wand larger fabrictackboards.)RRSREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESOverheads, Shelves, & HutchesRecessed Task Lights• Recessed task lights are black with a 9' longblack cord that is attached to the right rearcorner of the fixture. (Color does not need tobe specified.)• Bulbs are included.• RECOMMENDATION: Provide a separatecircuit for task lights to ensure proper,long-term operation.• Includes 4 Cord Retainer clips.Open MarketHow to specify —Select theModel Numberfrom above.ShipListDescription Model Weight Cubes PriceTask Lights (Black only) — Use recessed under overhead cabinets, storage shelves or hutches,comes with cord retainer clipsTask Light for 24"W 870824 3 S 0.2 $ 217Task Light for 30"W and 36"W 870830 4 S 0.3 $ 219Task Light for 42"W and 48"W 870842 6 S 0.5 $ 237Task Light for 60"W, 66"W and 72"W 870860 7 S 0.6 $ 256Task Lights (Black only) — With fused plug* (satisfies Chicago electrical code)Task Light for 24"W 870824CH 3 S 0.2 $ 280Task Light for 30"W and 36"W 870830CH 4 S 0.3 $ 286Task Light for 42"W and 48"W 870842CH 6 S 0.5 $ 302Task Light for 60"W, 66"W and 72"W 870860CH 7 S 0.6 $ 320*Cannot be plugged into concealed beltline electrical.Cord Retainer Clips (Black only)Bag of 50 clips APACM2 1 S 0.1 $ 29.1st Option:Paint(if applicable):See inside frontcover for finishes.PExamples: 870824.X• Shorter width models can be used on wideroverheads, shelves and hutches.• Chicago Task Light cords cannot be routedthrough the Hutch End Panels, due to thelarge size of the fused plugs.• All models are equipped with electronicballast for longer bulb life and cooleroperating temperature.• Use 18" Cord Covers with 69"H and 82"Hpanels; 13" with half-height shelves hung on56"H panels.APACM2.P27WATT USAGEModel Number870824 10870830 14870842 21870860 28Shippable by small-package carrier.222 | Systems Supplement – 3/2013STask LightingWattsOpen Market

Overheads & ShelvesDown Light• Down Light and Up Light can be mounted toany panel of same width or smaller.• Sleek profile blends into background.• Capable of off-module mounting.• Down Light has linear prismatic lens whichminimizes glare.• 9' cord length; exits from bottom right side.• Electronic high power factor ballast increasesenergy efficiency.• Slim, energy efficient, fluorescent T5 bulb.NOTE: Down Light not to be used as a shelf ortransaction surface.Task LightingOpen MarketOVERHEADS & HUTCHESOpen MarketHow to specify —Select theModel Numberfrom above.ETLD .Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceDown Light (panel-mounted task light)Off modular panel-mounted task lightfor 12" to 24"W panels ETLD24 5 S 0.4 $ 504 $ 543Off modular panel-mounted task lightfor 18" to 36"W panels ETLD36 7 S 0.6 $ 539 $ 578Off modular panel-mounted task lightfor 24" to 48"W panels ETLD48 10 S 0.9 $ 577 $ 616Off modular panel-mounted task lightfor 30" to 60"W panels ETLD60 12 S 1.1 $ 633 $ 672Off modular panel-mounted task lightfor 12" to 24"W panels — Chicago code ETLD24CH 5 S 0.4 $ 571 $ 610Off modular panel-mounted task lightfor 18" to 36"W panels — Chicago code ETLD36CH 7 S 0.6 $ 607 $ 646Off modular panel-mounted task lightfor 24" to 48"W panels — Chicago code ETLD48CH 10 S 0.9 $ 647 $ 686Off modular panel-mounted task lightfor 30" to 60"W panels — Chicago code ETLD60CH 12 S 1.1 $ 702 $ 741Up Light (panel-mounted ambient light)Ambient light for 24"W panel ETLDA24 D 5 S 0.4Ambient light for 36"W panel ETLDA36 D 7 S 0.6Ambient light for 48"W panel ETLDA48 D 10 S 0.9Ambient light for 24"W panel —Chicago code ETLDA24CH D 5 S 0.4Ambient light for 36"W panel —Chicago code ETLDA36CH D 7 S 0.6Ambient light for 48"W panel —Chicago code ETLDA48CH D 10 S 0.91st Option:Paint:See inside frontcover for finishes.PExample: ETLD48.P01Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 223SDDDDDDD Discontinued 8/29/2010DDDDDDREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESOverheads & ShelvesSpot Light• Magnetic ballast; 13 watt.• Compact design works in many applications,including small work areas.• 9' cord, exits from back of light.• Prismatic acrylic lens diffuses light acrosswork area.• ABS recyclable plastic housing.• Lightweight (less than 3 lbs.) facilitatescreative mounting options.• Available in black only.8283I8284IOpen MarketHow to specify —Select theModel Numberfrom above..ShipListDescription Model Weight Cubes PriceSpot Light (magnetic task light).Magnetic task light (13 watt magnetic ballast) ESLM D5 S 0.4Panel Hung/Freestanding Task LightsPanel Hung Task Light 8283I D D5 S 1.4Freestanding Task Light w/base 8284I D D13 S 1.41st Option:Color(if applicable):P27BlackP27Examples: ESLM.P27Panel Hung/Freestanding Task Lights• 13 watt compact fluorescent bulb.• Detachable plug in ballast.• Four adjustment points.• 27" of horizontal reach.• Available in Black only.1st Option:Color(if applicable):P BlackP8283I.PTask LightingD Discontinued 3/7/2010D D Discontinued 2/12/2012Shippable by small-package carrier.224 | Systems Supplement – 3/2013SOpen MarketDD DD D

Reach ® 43"/56"/69"HFeatureBenefitStorage units available in 3 widths — 36"W, 42"W,48"W. Storage units for Terrace 2.6 and Terrace 3.4available in 3 heights — 43"H, 56"H, and 69"H.Storage units for Concensys available in 2 heights —56"H and 69"H.Reach storage available in different heights andwidths to accommodate different station size andstorage requirements. Height aligns with Terraceand Concensys panels.Feature Reach storage connects to Terrace 2.6, Terrace 3.4,and Concensys.Benefit Allows Reach stations and traditional Terrace orConcensys in the same floor plan, as stations willvisually integrate. When planning a reconfigurationwith existing Terrace and Concensys panels Reachcan be integrated.FeatureBenefitFeatureBenefitReach storage can be specified in the spine wall or inthe wing wall of a workstation.Design versatility to create the office layout thatworks best for you.Reach storage wall can also stand by itself.Creating a functional open plan office with plenty ofstorage, plus the ability to route power and data, isall within Reach.FeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatures/BenefitsGSA Reference PageStorage units divide space.Reach gets rid of redundant surfaces and creates asmart and efficient worksetting.Consolidated storage.Eliminates pedestals getting in the way and overheadsimpeding on the workspace, Reach providesspaciousness to the office environment.Storage units and even a wardrobe built directly inthe wall.With Reach, achieve private office look and feel in anopen plan environment.Nothing above or below the worksurface.Fully usable and unobstructed worksurface.Worksurface height can be set to end user’spreference. No need for under cabinet task lighting toeliminate shadows cast by overhead cabinet storage.Unique worksurface shapes designed to optimizeusage of space.Plenty of usable worksurface space even in a smallfootprint. Saddle worksurface allows user to positionkeyboard and display left, right, or center withoutchanging worksurfaces. Secondary worksurface in thecorner provides space for over flow projects orimpromptu meetings.OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 225

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® 43"/56"/69"HFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitReach storage is a modular design. Reach-Terracestorage modules without integrated wardrobes can bereversed (rotated 180 degrees from the base) whenspecified. Choose from various storage options forbottom, middle and top module.Flexibility to customize storage units to the user’sneeds. Enables employees to get and stay organized.Top level of storage unit and 24"W wardrobe doorsare available in select Landscape materials.Flexibility to create a mainstream or unique andupscale look.Solid steel construction.Durable and functional furniture that withstands thetest of time.Footprint of a cluster of two Reach stations back toback is 7" smaller than a comparable cluster oftraditional stations.Reach is more space efficient, which allows addingspace to circulation — to be used for wider aisles ormore common areas.Tambour door option in the middle module.Door conveniently slides up and out of the wayenabling easy access to files, piles, or technology.Non-ported middle modules are equipped with a lockto secure valuables behind closed doors at the end ofthe day.Option for splitting top module.Provides better storage utilization; sufficient depth forbinder storage plus a bonus accessory shelf for facingworkstation.Wide range of tiles, including tool tile and papermanagement accessories can be attached to the backside of the Terrace 2.6 or Terrace 3.4 storage units.Back side of storage unit has the functionality of apanel ensures smart use of space and designcontinuity with the rest of the workstationcomponents.FeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatureBenefitFeatures/BenefitsGSA Reference PageElectrical and data provided at two levels — basepathway and beltline (middle). Power and data canbe specified inside storage unit — on the back andside.Plenty of options for today’s office hungry for accessto power and data. Concealed powered storageallows you to keep your technology gadgets pluggedin behind closed doors.Adjustable middle shelf comes standard with middlemodule, bottom module cabinet door, and 24"Wwardrobe unit.Better storage utilization and option to addadditional shelves.Pull-out shelf can be added to the middle module.Additional surface space for overflow projectsconveniently slides out from the storage unit. Alsoprovides easy access to printer and other technologyitems.Optional side shelves in the middle module.Additional sub-division of space to allow optimumstorage utilization.In-line connector for connecting a storage unit topanel in a run.Design flexibility to route power and data throughpanel around columns.Reach storage units can be ganged togetherside-by-side.Allows use of new or existing freestanding desks ortables. Eliminates additional cost for connectors ifwing panels are not required.Reach 20"W Terrace frames and Concensys panels.Allows storage units and panels to be combined intoone integrated system.Laminate and veneer storage unit tops available forReach.By placing worksurfaces on top of the storage unit,Reach allows plenty of extra space to sketch andshare ideas.Increased storage capacity with planning freedom.With Reach, users no longer have to sacrifice storagein a shrinking footprint. Reach provides the spaceneeded to stay organized and keep information andmaterials close at hand.226 | Systems Supplement – 3/2013

Reach ® 43"/56"/69"HReach, a new way to look at storage, a new way to plan space.Reach is an innovative workplace solution of versatile officefurniture that addresses the primary concerns of today’s officeenvironments by looking at storage and space in a new way.It’s a smarter solution that makes storage more active, peoplemore productive, offices more open, and worksurfaces moreworkable. In addition, because a Reach workstation is soopen, so efficient, and so dense with storage, Reach’s uniquebenefits extend beyond the individual office to space planning,interior design and facility management. A more compactspace actually feels bigger and works better.In traditional panel systems, storage sits on the floor or hangsoff the wall. Reach uses storage to create the wall. A spine orwing wall is built with layers of customized storagecomponents, including files and drawers, shelves andcompartments. Storage fronts in metal and Landscapematerials, and an array of finishes for the back of storage unitsallow you to create a distinct and cohesive statementthroughout your entire office.Reach integrates with Allsteel’s Terrace 2.6, Terrace 3.4, andConcensys panel systems, resulting in a uniquely functional,durable and spacious office environment. Because you do notneed panels to support or conceal storage, they can be lower,letting in more natural light and air. Or, you can do away withpanels altogether, and create a completely open design-drivenenvironment by using Reach with freestanding tables andscreens.Integrates with Terrace 2.6/3.4 and ConcensysOverviewGSA Reference PageA variety of unique worksurface shapes surround the end userwith expanses of active desking. Without pedestals to takeunder desk space and overheads to hang from above,worksurfaces can be set at whatever height is most comfortableand productive. With functional storage so close at hand,worksurfaces can be cleared for work. All worksurfaces areavailable in Allsteel’s standard laminate and veneer finisheswhich makes integration of Reach with traditional Terrace orConcensys stations a snap.Reach has exceptional power and data capabilities. Withpower at base pathway and beltline, and at multiple locationsinside storage units, equipment and electronics can be taken offthe worksurface. Specify storage with tambour door and createthe perfect place to power or recharge technology gadgetsbehind closed doors and out of eyesight.Optional accessories further enhance the functionality ofReach. Additional shelves within shelves get files and piles offthe worksurface while keeping them top of mind and close athand. A pull-out shelf provides additional worksurface spacefor overflow projects and easy access to technology andperipherals.OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 227

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® 43"/56"/69"HTop Level ModulesFlipper Door Hinged Doors Open ShelfMiddle Level ModulesTambour DoorBottom Level ModulesBox/Box/File/LateralBox/Box/File/Lateral/DoorBox/Box/File/Lateral/56"H WardrobeOpen ShelfFile/Box/Box/LateralDoor/File/Box/Box/LateralLateral/LateralLateral/Lateral/DoorOpen ShelvesDoor/Lateral/Lateral56" and 69"H 56" and 69"H 56" and 69"H 56" and 69"H56"H Wardrobe/File/Box/Box/LateralLateral/Lateral/56"H Wardrobe56"H Wardrobe/Lateral/LateralOverview of Storage UnitsGSA Reference Page56" and 69"H x 24"WStorage Wardrobe(split depth —order doors separately)228 | Systems Supplement – 3/2013

Reach ® 43"/56"/69"HTERRACE 2.6Overview of ComponentsGSA Reference PageOVERHEADS & HUTCHES“E” Frame43", 56", 69"H*TERRACE 3.4“E” Frame43", 56", 69"H*CONCENSYS“E” Frame56" and 69"H*“M” Frame43", 56", 69"H*“M” Frame56" and 69"H*Metal Finished End43", 56", 69"H*Metal Finished End56" and 69"H*Laminate with Flat or Wave-Shaped Edge and Veneer WorksurfacesRudder“M” Frame43", 56", 69"H*Rudder CoveMetal Finished End43", 56", 69"H*SaddleJettyTackable Acoustic,Steel, Landscape TilesTackable Acoustic,Steel, Landscape TilesTackable Acoustic TilesOverview of WorksurfacesCombinationSecondary*Nominal heightShaded edge indicates location of wave edge (optional), other edgesare flat to provide smooth transition between worksurfaces.Reach worksurfaces work with either Terrace or Concensys. Standard Concensys Flat Edge and Terrace worksurfaces can be usedwith Reach worksurfaces.REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 229

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® 43"/56"/69"HStorage units are36", 42", or 48"wide.Units ship fullyassembled and areavailable in 43",56", and 69"nominal heights forTerrace 3.4/2.6; or56" and 69" nominalheights forConcensys.Optional portedmiddle level providesports on the backside to powercomponents insidethe cabinet and atbeltline for the facingworkstation.Scoops for routing ofcables are standardon both sides ofmiddle (exceptintegrated wardrobe)and top modules.Optional side powerand data ports canreplace scoops whenadjacent to a 20"WReach panel.Base pathway coverson back have outletopenings that acceptTerrace 2.6 duplexreceptacles orcommerciallyavailable modulardata faceplates.Leveling glidesprovide 2 5 ⁄8" ofadjustment and areeasily accessible fromthe interior of themodule.ConstructionBase pathwayaccepts voice,data, and fiberoptic cable.Non-ported base pathwayaccepts voice, data, andfiber optic cable whenbelow drawer.Storage units are20" deep and areavailable in an array ofpaint and landscapeoptions.Top modules areavailable as full depth,or shared depth(2/3 cabinet, 1/3open shelf) toaccommodate users atboth the front andback of unit.Top and full-widthnon-ported middleReach-Terracemodules can bereversed (rotated180°) from bottommodule, whenspecified, to faceopposing workstation.Pull options includearch, integral, orsquare.Drawer combinationsinclude box, file andlateral. Hinged dooravailable on 42"Wunit and standard on48"W units. Optionalintegrated wardrobeon 42"W and 48"Wunits.Storage modules — steel front posts are formed with eight formations to provide unparalleledstability and strength. The unique design allows unmatched longevity. Units are shipped fullyassembled per ordering specifications.Frames or panels — formed, steel vertical members, with tubular steel horizontal members create astrong, sturdy structural frame and complements the storage unit.Working WithGSA Reference PageFeaturesMultiple combinations ofstorage configurations can bespecified including flipper,hinged, and tambour doors.Drawer combinations includebox, file and lateral. Finishoptions include metal andlandscape materials in anarray of colors.Ability to reverse top andfull-width, non-ported middleReach-Terrace modules, whenspecifying, to face theopposing workstation.Reach units withreversed middle level.Ported storage modules allowelectric and data access. Datacan be routed from the basepathway up the back side ofeach unit to the middle level,inside module, similar tobeltline accessibility intraditional systems.Unique frames connect Reachto Terrace 2.6, Terrace 3.4, orConcensys panel systems.Monolithic fabric tiles areavailable for Reach Concensysframes; monolithic andsegmented fabric, landscape,and veneer tiles are availablefor Terrace frames.Freestanding — Reach storageunits without panels in anopen design environmentrequire at least two units to beganged side-by-side.Accessories include a pull-outshelf, side shelves, and Get SetTask table.230 | Systems Supplement – 3/2013

Reach ® 43"/56"/69"HTOP13"HWorking WithGSA Reference PageTop modules are specified in 43"H* and 69"H** applications. 43"H units accommodateOpen Shelf top modules. 69"H units accommodate Open Shelf, Flipper, and Hinged Doormodules. All have the unique ability to be ordered as full depth or shared depth ( 2 ⁄3 depthcabinet; 1 ⁄3 depth open shelf) to accommodate user needs on both the front and back sidesof the cabinet. Reach-Terrace 3.4/2.6 top modules can be rotated 180° from bottommodule when produced allowing them to open towards the facing station.OVERHEADS & HUTCHESMIDDLEBOTTOM26"H30"HTop + Middle + Bottom = One flexible, customized storage unit.Middle modules are specified in 56"H** and 69"H** applications. They are full depthmodules and are available in tambour door and open shelf options. Middle level modulesship with one 12" deep, height-adjustable shelf. Additional shelves can be orderedseparately. Optional side shelves that mount in 1" increments to the slotted side-wall can beordered to provide additional organization. Ported modules may be ordered to providepower and data in the back of the module. Non-ported Reach-Terrace 3.4/2.6 middlemodule can be reversed (rotated 180°) from bottom unit when produced, allowing it toopen toward the facing station. Scoops for routing of cables are standard on both sides ofall middle modules.Bottom modules are specified for 43"H*, 56"H**, and 69"H** applications. Drawercombinations include lateral, box, and file. A hinged door is optional for 42"W units and isstandard on 48"W units. Front-to-back and side-to-side filing is standard in lateral and filedrawers. Open Shelf bottom modules are available in all three widths and are 17" deep.Base pathway on the front and back side accept voice, data, and fiber optic cables as well asthe electrical system.All units are shipped fully assembled to reduce installation time. Units are available in 36",42", and 48" widths and 43"*, 56", and 69" nominal heights. Locking is standard on alldrawers, non-ported middle module tambour doors, and top module flipper doors. Bottomlevel doors, wardrobe doors, and Landscape doors for top module are non -locking. All lockswithin a single unit are keyed alike, and are core removable. Reach core removable locks areinterchangeable with other Allsteel storage products and56"H**can be keyed alike with traditional storage.*** Reach storageunits cannot be used in a single stand-alone application.Units used without panels require at least two units tobe ganged side-by-side.43"H**Terrace 3.4/2.6 only.**Nominal height. Concensys middle modules are actually 22"H to allow Concensys low profile panel height to align with storage units.***NOTE: Current Reach uses lock core LKF25EL. In 3rd Quarter 2009 Reach will transition to lock core LKF23C to match traditional storage. Contact CustomerSupport at time of order placement for confirmation.69"H**REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 231

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® 43"/56"/69"HIntegrated Wardrobe UnitsFULL-WIDTH TOPMIDDLE (WIDTH – 12”)BOTTOMFull-Width Top + Middle (Width – 12") + Bottom w/56"H WardrobeAll units are shipped fully assembled to reduceinstallation time. Units are available in 42" and 48"widths and 56" and 69" nominal heights. Locking isstandard on all drawers, non-ported middle moduletambour doors, top module flipper doors, and integratedwardrobe doors. All locks within a single unit are keyedalike, and are core removable. Reach core removablelocks are interchangeable with other Allsteel storageproducts and can be keyed alike with traditional Allsteelstorage.*** Reach storage units cannot be used in asingle stand-alone application. Units used without panelsrequire at least two units to be ganged side-by-side.Back-to-back Reach installations should be avoided foraesthetic reasons.**Nominal height. Concensys middle modules areactually 22"H to allow Concensys low profile panelheight to align with storage units.***See note page 231.13"H26"H30"HWorking WithTop modules are full-width in 69"H** integrated wardrobe applications. Unitsaccommodate Open Shelf and Flipper Door modules. Both have the unique ability to beordered as full depth or shared depth ( 2 ⁄3 depth cabinet; 1 ⁄3 depth open shelf) toaccommodate user needs on both the front and back sides of the cabinet. Top modulescannot be specified reversed from bottom module on integrated wardrobe units.Middle modules are 12" narrower than cabinet width on 56"H** and 69"H** integratedwardrobe units. They are full depth modules and are available in tambour door, and openshelf options. Middle level modules ship with one 12" deep, height-adjustable shelf.Additional shelves can be ordered separately. Optional side shelves that mount in 1"increments to the slotted side-wall can be ordered to provide additional organization.Ported modules may be ordered to provide power and data in the back of the module.Scoops for routing of cables are standard on non-wardrobe side of integrated wardrobemiddle modules. Middle modules cannot be specified reversed from bottom module onintegrated wardrobe units.Bottom integrated wardrobe modules are specified in 56"H** or 69"H** and 42"Wor 48"W units. Drawer combinations include lateral, box, and file. A 12"W x 56"H hingeddoor extends from the bottom module to the height of the middle module. Wardrobecompartment features a coat rod, depth of unit works best with 16" hanger. Front-to-backand side-to-side filing is standard in lateral and file drawers. Base pathway on the front andback side accept voice, data, and fiber optic cables as well as the electrical system.56"H**GSA Reference Page69"H**232 | Systems Supplement – 3/2013

Reach ® 43"/56"/69"HBuilding with ReachIntersecting connections“E” 90°Top View“E” 90°Multiple-heightConnectionsIn variable-heightconnections — as shownbelow — you would use theconnection parts as indicated.69"HWorking With Storage/FramesExample 1GSA Reference PageTile Attachment Kits areshipped with each Reachunit for attaching tiles to theback of the storage. Thesecolor-matched, horizontal stripscap off a run of tiles; or start arun of tiles on reversed middleor upper modules of Terrace2.6 or Concensys. (See below.)OVERHEADS & HUTCHES“M” 4-Way“M” 4-Way“E” 3-WayReach “E” and “M” panelframes are 20"W and aresystem specific. They connectto Reach storage units andallow integration of Terrace2.6, Terrace 3.4, or Concensys.“E” panel frames ship withtop cap, one kickplate, andattachment hardware.Concensys “E” panel framesalso ship with one fabric tilewhich finishes the outer sideof the panel frame.“M” panel frames shipwith top cap and attachmenthardware.“E” 3-Way90° configurations consistof an “E” panel frame,adjacent panel or frame, theappropriate height end trim,and tiles to finish approachside. (Order separately.)3-Way configurationsconsist of an “E” panel frame,adjacent panels (both sides),appropriate height end trim,and tiles to finish approachside. (Order separately.)4-Way configurationsconsist of an “M” panelframe, adjacent frames, andappropriate height end trim.(Order separately.)Each 90°, 3-Way, or 4-Wayconnection, adds to the totallength of the storage run asnoted:Terrace 2.6...............2 3 ⁄4"Terrace 3.4...............3 1 ⁄2"Concensys ................2 1 ⁄4"Connections — ReachDirect connections in astraight line between “E” and“M” panel frames and samestyle Terrace frames areaccomplished with providedhardware. There is noincremental increase indimension along the run.Standard connectors areutilized when connectingReach “E” and “M” panelframes to Concensys panels.Thin Tile Attachment Kits(FTK1XX), cap off the uppermodule tile when adjacent to aflipper or hinged door moduleon Terrace 2.6 or Concensys.Thick Tile Attachment Kits(FTK2XX), are used on 56"Hunits to cap off tile adjacent toa tambour door; or the top tileof any unit that is adjacent toan open shelf.Quantity and type of kitsincluded with each unitassumes adjacent unit isconfigured the same androtated 180°. If different itmay require ordering a kit ofthe opposite thickness for bestaesthetics.Terrace 3.4 tiles alwaysrequire Thick Tile AttachmentKits at the top of each tile run(specified separately). Whensegmenting 3.4 tiles on Reachstorage units, special segmentkits are required:• Reach “B” Beltline/Bottom Kit for beltline orto support bottom of tilerun in reverse moduleapplications, other thaninitial tile at base rail.• Reach “S” Standard Kitsfor reveal between tileswhen segmenting.(See illustration onpage 280.)1 – 69"H Panel End CoverSystems Supplement – 3/2013 allsteeloffice.com | 23356"H56"HTerrace (all 2.6 or all 3.4)1 – Reach 69"H “M” panel frame1 – 13"H High-low End TrimConcensys1 – Reach 69"H “M” panel frame2 – 69"H Straight Connectors1 – 13"H Variable Height Finish KitExample 269"H69"H43"H43"HTerrace (all 2.6 or all 3.4)1 – Reach 69"H “M” panel frame1 – 13"H High-low End Trim1 – 26"H High-low End Trim1 – 13"H x 20"W tileConcensys• Reach units on each side of “M”panel frame must be the sameheight.Example 3Terrace (all 2.6 or all 3.4)1 – Reach 69"H “E” panel frame1 – 26"H High-low End Trim1 – 69"H End TrimConcensys1 – Reach 69"H “E” panel frame1 – 69"H Straight Connectors1 – 26"H Variable Height Finish KitFTK1xxFTK2xxREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® 43"/56"/69"H Working With Reach and Terrace 2.6 or 3.4GSA Reference PageReach Storage units for use with the Terrace 2.6 or Terrace 3.4 panel systems are available in 43", 56", and 69"H. Units arespecified in 36", 42", and 48" widths and are 20" deep. “E” frames and “M” frames need to be same style as wing panels beingattached, either Terrace 2.6 or Terrace 3.4.1. 20"W Reach “E” frames endstorage run when Terracewing walls are utilized. Ordertiles separately.2. 20"W Reach “M” framesplaced between storageunits to allow for Terracewing panels.3. In-line Metal Finished End orMetal Finished End isutilized when storage runends and wing panels arenot used.4. Reach In-line connector kitsallow an in-line connectionof Reach storage andTerrace frame.5. Reach “E” and “M” framesare available with same topcaps as standard frames.6. Standard Terrace 2.6 or 3.4tiles to match wing wallsfinish the backside ofstorage modules that are notbi-directional. Terrace 3.4tiles require thick tileattachment kits (orderseparate) and appropriatesegment kits.7. Landscape surface tiles,including markerboards andtool tiles, allow you tochoose from a range ofinnovative materials.8. Fabric tackable acousticaltiles are available inhundreds of fabrics andcolors.9. Reach specific electricalcomponents work inconjunction with standardelectrical components.Specify Terrace 2.6receptacles for all Reachstorage units. Electrical anddata can be located atbeltline, in base pathway,and in the interior back andsides of non-locking middlestorage levels.10. Terrace 3.4 concealedpower/data, tile accessmechanisms, and hinge tilesare limited to wing panels.11. Tool tiles or rails may beadded to provide extrastorage and increaseworksurface space.1 2 3 4515 14 13 12 1110 9 8 7 612. Optional pull-out shelf andadjustable side shelvesordered separately.13. Locking units standard withcore removable lock notinterchangeable with otherAllsteel storage products.14. Variable height applicationsrequire same style Terrace2.6 or 3.4 components.15. Reach “M” and “E” panelframes and matching stylestandard Terrace 2.6 orTerrace 3.4 frames integratesmoothly with no extrapieces to order.234 | Systems Supplement – 3/2013

Reach ® 43"/56"/69"HWorking With Reach and ConcensysGSA Reference PageReach Storage units for use with the the Concensys panel system are available in 56" and 69" nominal heights. Units arespecified in 36", 42", and 48" widths and are 20" deep.OVERHEADS & HUTCHES1. 20"W Reach “E” panels endstorage run when Concensyswing walls are utilized.Includes one 20"Wmonolithic tackable andacoustical fabric tile.2. Reach “M” panels placed inbetween storage units toallow Concensys wing panelruns.3. In-line Metal Finished End orMetal Finished End isutilized when storage runends and wing panels arenot used.4. Reach In-line connector kitsallow an in-line connectionof Reach storage andConcensys panel integration.5. Reach “E” and “M” panelsare available in Concensys“P” Low Profile and “W”Wood Veneer top caps.6. Monolithic fabric tackableacoustical tiles (orderseparately) match the heightof reverse storage modules.7. Monolithic fabric tackableacoustical tiles (orderseparately) finish thebackside of storage modulesthat are not bi-directional.8. Reach specific electricalcomponents work inconjunction with standardelectrical components.Specify Terrace 2.6receptacles for all Reachstorage units (regularConcensys receptacles forpanels). Electrical and datacan be located in basepathway and in the back andsides of non-locking middlestorage levels.9. Tool rails may be added tothe back side of storageunits to provide extrastorage and increasedworksurface space.10. Optional pull-out shelf andadjustable side shelvesordered separately.1 2 3 4513 12 11 109 8 7 611. Locking units standard withcore removable lock notinterchangeable with otherAllsteel storage products.12. Standard Concensysconnector used to joinstandard Concensys andReach “M” and “E” panels.13. In variable heightapplications, order tallestheight connection andvariable height trim kit.REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 235

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® 43"/56"/69"HMODULE CODE 36"W 42"W 48"W36"W 42"W48"WTAFlipper Door13"H TOP LEVEL26"H MIDDLE LEVEL**30"H BOTTOM LEVELFull DepthSplit DepthTDHinged DoorsTCOpen ShelfTEFlipper DoorTHHinged DoorsTGOpen ShelfTambour DoorMA – TranslucentMB – Cool MetallicMC – Warm MetallicMF – Milky WhiteMDOpen Shelf30"W 36"WIntegrated Wardrobe doors are 12"Wrequiring 30"W middle level on 42"Wand 36"W middle level on 48"W units.BALateral/Lateral BI 56"HBM 69"H*Box/Box/FileLateral/WardrobeBBBox/Box/FileLateralBCFile/Box/BoxLateralBDBox/Box/File/Lateral/DoorBEFile/Box/Box/Door/LateralBFDoor Right/Lateral/LateralBGDoor Left/Lateral/LateralBHOpen ShelfMETAL FRONT** Nominal height. Concensys middle modulesare actually 22"H to allow Concensys lowprofile panel height to align with storage units.42"WLANDSCAPE FRONTINTEGRATED WARDROBE UNITS48"WTambour DoorXMA – TranslucentXMB – Cool MetallicXMC – Warm MetallicXMF – Milky WhiteXMDOpen ShelfBJ 56"HBN 69"H*File/Box/BoxWardrobe/LateralBK 56"HBO 69"H*Wardrobe RightLateral/LateralBL 56"HBP 69"H*Wardrobe LeftLateral/Lateral* All integrated wardrobe doors are 56"H.69"H units require standard 13"H top levelmodules the full-width of the cabinet.Metal24"WOverviewWARDROBES69"H**56"H**Landscape24"WWardrobe Cabinets aresplit-depth, (9" interior foreach side), and are available in56"H and 69"H. They featurefull-length, non-handed,non-locking doors for each side— order separately. Uniquemodels support either Terraceor Concensys heights.236 | Systems Supplement – 3/2013

Reach ® 43"/56"/69"HSpecification GuidelinesGSA Reference PageReach storage units can be used in conjunction with Terrace 2.6, Terrace 3.4, or Concensys panel systems, or as a freestandingwall. To find information regarding specification guidelines for Terrace 2.6, Terrace 3.4, or Concensys panel systems, or tospecify standard systems product, refer to system specific pages in this pricer.The following notes are general specification guidelines for your convenience. Use the Reach typicals on page 287 or on ourwebsite as a reference; go to: allsteeloffice.com/TypicalsGallery.OVERHEADS & HUTCHESSPECIFICATIONWorking with Reach1. STORAGE UNITS (See pages 239-272.)• Choose the height and width of the storage unit.• Determine the base level drawer combination(Ex: Box/Box/File/Lateral, Lateral/Lateral).• Select the material(s) (metal and landscape) for eachstorage levels.• Select the drawer pull option.• If applicable, choose the middle level option. In doingthis, determine if the level will be reversed (rotated 180°from base level only available on Reach-Terrace 3.4/2.6)or ported. Middle level units on integrated wardrobeunits are 12" narrower than base cabinet to compensatefor width of wardrobe. (Not all options available on allunits.)• If applicable, select the top level option. Determine if thislevel will be reversed (rotated 180° from base level onlyavailable on Reach-Terrace 3.4/2.6.)• Choose applicable finish options.• Order appropriate tile options separately for back ofstorage unit.• Determine if 24"W wardrobe storage will be utilized andorder.NOTE: Hinged door top modules are shipped withoutdoors when Landscape option is ordered, and all24"W wardrobe storage units are shipped withoutdoors. Doors must be ordered separately — seepage 271.2. FRAMES, FINISHED ENDS, TILES (See pages 274-277 forTerrace 2.6, pages 278-281 for Terrace 3.4, and pages282-286 for Concensys.)• Determine the appropriate number of “M” Middle panelframes necessary.• Determine the appropriate number of “E” End panelframes necessary.NOTE: Concensys “E” End panel frames ship with onefabricated side. Must notate fabric option.• Where applicable, choose the height of the MetalFinished end, along with paint finish option.• Select the appropriate tile(s) to finish the exterior side ofthe Terrace “E” End panel frame. Use Terrace 2.6 tileswhen using Terrace 2.6 “E” End panels. Use Terrace 3.4tiles when using Terrace 3.4 “E” End panels.3. ELECTRICAL (See pages 288-293.)Standard electrical models are used in the Reach systemwith the following exceptions:• Extended power harnesses should be ordered whenzig-zagging electrical between the front and back of aReach unit AND to jump from base to beltline.• Use Terrace 2.6 duplex receptacles for Reach Terrace 2.6or 3.4 and Reach Concensys storage units.• Side Power/Data Port can be ordered to replace thescoop in left or right side of middle or top levels. Whenusing the side power/data port, an “E” or “M” panelframe must be adjacent to the storage unit to provideadequate depth. Middle level of integrated wardrobeunit only has one side scoop.NOTE: U.L requires Reach modules with internal portedelectrical receptacles to be specified as non-lockingunits.• If applicable, order integrated power pole and infeed forTerrace 2.6 or 3.4 units. Currently a Concensys/Reachintegrated powered pole is not available. In-feed needs tobe made through wing panels using existing electricalmodels.4. WORKSURFACES (See pages 294-305.)• Choose the shape, size, edge, and grommet or scallopoptions for the application.• Determine the number of worksurfaces needed.• Specify worksurface finish options.• Standard Concensys Flat Edge or Terrace worksurfacescan be used with Reach surfaces. If Reach curvilinearworksurfaces are used with traditional storage,consideration needs to be given to aesthetics.5. SUPPORTS (See pages 306-307.)• Determine the appropriate type and number of supportsnecessary for the application.• 18" Deep cantilevers are designed for use with 20" deepcombination or secondary worksurfaces.• Handed cantilever bracket (see page 195) should bespecified for 24" or 30"D worksurfaces.• 78" and 84" wide worksurfaces require a 24"Dcantilever bracket at center. (Order separately.)• Specify finish options where applicable.6. ACCESSORIES (See page 273 and 328-339.)• Specify accessories (adjustable, pull-out, and side shelves;Extensions) as needed.REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 237

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® 43"/56"/69"HFeatures Terrace 2.6 or 3.4 ConcensysUnit Widths 36", 42", 48" W 36", 42", 48"WWardrobe Cabinet Width 24"W 24"W(note integrated below)Unit Heights 43 1 ⁄4"H Nominal 53"H Nominal56 1 ⁄4"H Nominal 66"H Nominal69 1 ⁄4"H NominalWardrobe Heights 56 1 ⁄4"H Nominal 53"H Nominal69 1 ⁄4"H Nominal 66"H NominalUnit Depth 20"D 20"DWardrobe Cabinet Depth 20"D 20"D(note integrated below)Storage Depth Top (full depth) – 16" Top (full depth) – 16"(usable space) Top (66/33) – 12 1 ⁄8" / 6 1 ⁄8" Top (66/33) – 12 1 ⁄8" / 6 1 ⁄8"Middle – 16" Tambour DoorMiddle – 16" Tambour DoorBottom – Box Drawer – 15 1 ⁄2" Bottom – Box Drawer – 15 1 ⁄2"File Drawer – 15 1 ⁄2" File Drawer – 15 1 ⁄2"Lateral Drawer – 16 1 ⁄2" Lateral Drawer – 16 1 ⁄2"Door – 16 1 ⁄2" Door – 16 1 ⁄2"Integrated Wardrobe – 16 1 ⁄2" Integrated Wardrobe – 16 1 ⁄2"Open Shelf – 17" Open Shelf – 17"Open Shelf Depth – 17" Depth – 17"(usable storage) Width – 34 1 ⁄2", 40 1 ⁄2", 46 1 ⁄2" Width – 34 1 ⁄2", 40 1 ⁄2", 46 1 ⁄2"Height – 24" with shelf centered;Height – 24" with shelf centered;5⁄8" shelf adjusts ±2" from center 5⁄8" shelf adjusts ±2" from centerWardrobe Cabinet Depth – 9" Depth – 9"(usable space) Width – 22 3 ⁄4" Width – 22 3 ⁄4"Height – 51"H, 64"H Height – 47"H, 60"HIntegrated Wardrobe Depth – 16 1 ⁄2" Depth – 16 1 ⁄2"(usable space) Width – 10 3 ⁄4" Width – 10 3 ⁄4"Height – 51"H Height – 47"HPull Styles A – Arch A – ArchI – IntegralI – IntegralS – SquareS – SquareFeatures and DimensionsLock Options:Lock Top – Standard – Flipper Door (except 43"H) Top – Standard – Flipper DoorMiddle – Standard – Tambour Door on non-ported units Middle – Standard – Tambour Door on non-ported unitsBottom – Standard, one lock for all drawersBottom – Standard, one lock for all drawersTop Landscape Doors/24"W Wardrobe – Non-locking Top Landscape Doors/24"W Wardrobe – Non-lockingIntegrated Wardrobe – StandardIntegrated Wardrobe – StandardMaster Keyed Lock Standard StandardRemovable Lock Core Yes YesDual-Side Locking Yes – Lateral and Tambour Door Yes – Lateral and Tambour DoorSuspension Extra Heavy Duty Extra Heavy DutyTelescoping steel ball bearing slideTelescoping steel ball bearing slideLateral Drawer Interlock Double Double(Slide Integrated)(Slide Integrated)Drawer Front Construction Double Wall Double WallHex-head Glide Yes Yes(for easy Inside Unit Leveling)Pull-out Shelf Optional Accessory Optional AccessoryFront-to-Back Filing Standard StandardLateral Filing Options Letter, A4 and legal Letter, A4 and legal(side-to-side and front-to-back)(side-to-side and front-to-back)Lateral Adjustable Back Letter, A4 and legal Letter, A4 and legal(to accommodate paper sizesfiled side-to-side)GSA Reference Page238 | Systems Supplement – 3/2013

Reach ® Storage43H* x 36WOrder tiles for back of unit separately.Bottom LevelGSA SIN 711-1See specification guidelines on page 237.Bottom/Top Level Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price43H x 36W Box/Box/File/LateralMetal/Metal FT4336MMBB D A, I or S 159 22.3 $2699 $2855OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.F T433643H x 36W File/Box/Box/LateralMetal/Metal FT4336MMBC D A, I or S 159 22.3 $2699 $285543H x 36W Lateral/LateralMetal/Metal FT4336MMBA D A, I or S 159 22.3 $2195 $235143H x 36W Open ShelfMetal/Metal FT4336MMBH D A, I or S 159 22.3 $1689 $18451st Option:Pull:A ArchI IntegralS Square.2nd Option:Select theapplicableOpen Shelf TopLevel optionfrom page 245:Example: FT4336MMBBA.TCN.PR2.EL.4th Option:Paint:P .5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverSystems Supplement – 3/2013 allsteeloffice.com | 239ED Discontinued 12/31/2013*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage56H* x 36WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56363rd Option:Paint:P .EOrder tiles for back of unit separately.Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 36W Box/Box/File/LateralMetal/Metal FT5636MMBB D A, I or S 212 28.5 $2699 $2891Metal/Metal FC5636MMBB D A, I or S 212 28.5 $2553 $273456H x 36W File/Box/Box/LateralBottom LevelGSA SIN 711-1Metal/Metal FT5636MMBC D A or I 212 28.5 $2699 $2891Metal/Metal FC5636MMBC D A or I 212 28.5 $2553 $27344th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FT5636MMBBA.MDN.P27.E42nd Option:Select the applicableMiddle Level optionfrom page 244:Add $145 for reversedReach-Terrace modules.240 | Systems Supplement – 3/2013.See specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height

Reach ® Storage56H* x 36WOrder tiles for back of unit separately.56H x 36W Lateral/LateralBottom LevelGSA SIN 711-1See specification guidelines on page 237.Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List PriceMetal/Metal FT5636MMBA D A, I or S 212 28.5 $2195 $2387Metal/Metal FC5636MMBA D A, I or S 212 28.5 $2076 $2257OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56363rd Option:Paint:P .E56H x 36W Open ShelfMetal/Metal FT5636MMBH D A, I or S 212 28.5 $1689 $1881Metal/Metal FC5636MMBH D A, I or S 212 28.5 $1598 $17794th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FT5636MMBAA.MANL.P27.E42nd Option:Select the applicableMiddle Level optionfrom page 244:Add $145 for reversedReach-Terrace modules.Systems Supplement – 3/2013 allsteeloffice.com | 241.D Discontinued 12/31/2013*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage69H* x 36WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 69364th Option:Paint:P .EOrder tiles for back of unit separately.Concensys “FC”Bottom/Middle/Top Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 36W Box/Box/File/LateralMetal/Metal/Metal FT6936MMMBB D A, I or S 257 34.8 $2699 $2926Metal/Metal/Metal FC6936MMMBB D A, I or S 257 34.8 $2553 $2768Metal/Metal/Landscape FT6936MMLBB D A or S 257 34.8 $2699 $2926Metal/Metal/Landscape FC6936MMLBB D A or S 257 34.8 $2553 $276869H x 36W File/Box/Box/LateralBottom LevelGSA SIN 711-1See specification guidelines on page 237.Metal/Metal/Metal FT6936MMMBC D A, I or S 257 34.8 $2699 $2926Metal/Metal/Metal FC6936MMMBC D A, I or S 257 34.8 $2553 $2768Metal/Metal/Landscape FT6936MMLBC D A or S 257 34.8 $2699 $2926Metal/Metal/Landscape FC936MMLBC D A or S 257 34.8 $2553 $27685th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI Integral (Metal/Metal/Metal only)S Square.Example: FC6936MMMBCI.MCNL.TAN.P4J2nd Option:Select the applicableMiddle Level optionfrom page 244:Add $145 for reversedReach-Terrace modules.242 | Systems Supplement – 3/2013.D Discontinued 12/31/20133rd Option:Select the applicableTop Level optionfrom page 245:.*Nominal height

Reach ® Storage69H* x 36WOrder tiles for back of unit separately.Concensys “FC”Bottom/Middle/Top Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 36W Lateral/LateralBottom LevelGSA SIN 711-1See specification guidelines on page 237.Metal/Metal/Metal FT6936MMMBA D A, I or S 257 34.8 $2195 $2422Metal/Metal/Metal FC6936MMMBA D A, I or S 257 34.8 $2076 $2291Metal/Metal/Landscape FT6936MMLBA D A or S 257 34.8 $2195 $2422Metal/Metal/Landscape FC6936MMLBA D A or S 257 34.8 $2076 $2291OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 69364th Option:Paint:P .E69H x 36W Open ShelfMetal/Metal/Metal FT6936MMMBH D A, I or S 257 34.8 $1689 $1916Metal/Metal/Metal FC6936MMMBH D A, I or S 257 34.8 $1598 $1813Metal/Metal/Landscape FT6936MMLBH D A or S 257 34.8 $1689 $1916Metal/Metal/Landscape FC6936MMLBH D A or S 257 34.8 $1598 $18135th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI Integral (Metal/Metal/Metal only)S Square.Example: FC6936MMMBAI.MCNL.TAN.P4J2nd Option:Select the applicableMiddle Level optionfrom page 244:Add $145 for reversedReach-Terrace modules.Systems Supplement – 3/2013 allsteeloffice.com | 243.D Discontinued 12/31/20133rd Option:Select the applicableTop Level optionfrom page 245:.*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage36W OptionsOrder tiles for back of unit separately.Reversed*Component Option Code Terrace ConcensysDescription Option Code ($145 upcharge) List Price List Price36"W MIDDLE LEVEL OPTIONS — MetalTambour DoorTranslucent – Non-ported MANL D AMNL* D$1320 $1133Cool Metallic – Non-ported MBNL D BMNL* D$1320 $1133Warm Metallic – Non-ported MCNL D CMNL* D$1320 $1133Milky White – Non-ported MFNL D FMNL* D$1320 $1133Translucent – Ported** MAP D$1249 $1063Cool Metallic – Ported** MBP D$1249 $1063Warm Metallic – Ported** MCP D$1249 $1063Milky White – Ported** MFP D$1249 $1063Open ShelvesNon-ported MDN D DMN* D$ 722 $ 618Ported MDP D$ 742 $ 632*Reversed option available on Reach-Terrace units only.**Ported storage is only available as non-locking to comply with U.L. requirements.Middle LevelGSA SIN 711-1See specification guidelines on page 237.D Discontinued 12/31/2013244 | Systems Supplement – 3/2013

Reach ® Storage36W OptionsOrder tiles for back of unit separately.Component Reversed* Terrace ConcensysDescription Option Code Option Code List Price List Price36"W TOP LEVEL OPTIONS — MetalFlipper DoorFull Depth – Non-ported TAN D ATN* D$ 799 $ 75566/33 Split – Non-ported TEN D ETN* D$ 849 $ 803NOTE: Option not available on 43"H storage modules.Top LevelGSA SIN 711-1See specification guidelines on page 237.OVERHEADS & HUTCHES36"W TOP LEVEL OPTIONS — MetalOpen ShelfFull Depth – Non-ported TCN D CTN* D$ 600 $ 56766/33 Split – Non-ported TGN D GTN* D$ 652 $ 61736"W TOP LEVEL OPTIONS — LandscapeReady for Hinged Doors (order doors separately on page 271)Full Depth – Non-ported TDN D DTN* D$ 600 $ 56766/33 Split – Non-ported THN D HTN* D$ 652 $ 617NOTE: Option not available on 43"H storage modules.*Reversed option available on Reach-Terrace units only.D Discontinued 12/31/2013REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 245

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage43H* x 42WHow to specify —Select theBase Model Numberfrom above.F T43423rd Option:Paint:P .EOrder tiles for back of unit separately.Bottom/Top Level Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price43H x 42W Box/Box/File/Lateral/Door — RightMetal/Metal FT4342MMBD D A, I or S 182 25.8 $3012 $316843H x 42W File/Box/Box/Lateral/Door — LeftMetal/Metal FT4342MMBE D A, I or S 182 25.8 $3012 $316843H x 42W Lateral/LateralGSA SIN 711-1Metal/Metal FT4342MMBA D A, I or S 182 25.8 $2259 $24154th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FT4342MMBDI.TGN.P272nd Option:Select the applicableOpen Shelf Top Leveloption from page 257:246 | Systems Supplement – 3/2013.Bottom LevelSee specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height

Reach ® Storage43H* x 42WOrder tiles for back of unit separately.Bottom/Top Level Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price43H x 42W Lateral/Lateral/Door — RightBottom LevelGSA SIN 711-1See specification guidelines on page 237.Metal/Metal FT4342MMBF D A, I or S 182 25.8 $2537 $2693OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.F T43423rd Option:Paint:P .43H x 42W Lateral/Lateral/Door — LeftMetal/Metal FT4342MMBG D A, I or S 182 25.8 $2537 $269343H x 42W Open ShelfMetal/Metal FT4342MMBH D A, I or S 182 25.8 $1756 $19124th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverE1st Option:Pull:A ArchI IntegralS Square.Example: FT4342MMBFA.TCN.P27.E42nd Option:Select the applicableOpen Shelf Top Leveloption from page 257:Systems Supplement – 3/2013 allsteeloffice.com | 247.D Discontinued 12/31/2013*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage56H* x 42WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56423rd Option:Paint:P .EOrder tiles for back of unit separately.GSA SIN 711-1Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 42W Box/Box/File/Lateral/Door — RightMetal/Metal FT5642MMBD D A, I or S 240 33.1 $3012 $3204Metal/Metal FC5642MMBD D A, I or S 240 33.1 $2849 $303056H x 42W File/Box/Box/Lateral/Door — LeftMetal/Metal FT5642MMBE D A, I or S 240 33.1 $3012 $3204Metal/Metal FC5642MMBE D A, I or S 240 33.1 $2849 $303056H x 42W Lateral/LateralMetal/Metal FT5642MMBA D A, I or S 240 33.1 $2259 $2451Metal/Metal FC5642MMBA D A, I or S 240 33.1 $2137 $23184th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FC5642MMBDA.MANL.PR2.EL2nd Option:Select the applicableMiddle Level optionfrom page 256:Add $145 for reversedReach-Terrace modules.248 | Systems Supplement – 3/2013.Bottom LevelSee specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height

Reach ® Storage56H* x 42WOrder tiles for back of unit separately.GSA SIN 711-1Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 42W Lateral/Lateral/Door — RightBottom LevelSee specification guidelines on page 237.Metal/Metal FT5642MMBF D A, I or S 240 33.1 $2537 $2729Metal/Metal FC5642MMBF D A, I or S 240 33.1 $2400 $2581OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56423rd Option:Paint:P .E56H x 42W Lateral/Lateral/Door — LeftMetal/Metal FT5642MMBG D A, I or S 240 33.1 $2537 $2729Metal/Metal FC5642MMBG D A, I or S 240 33.1 $2400 $258156H x 42W Open ShelfMetal/Metal FT5642MMBH D A, I or S 240 33.1 $1756 $1948Metal/Metal FC5642MMBH D A, I or S 240 33.1 $1662 $18434th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FT5642MMBFA.MDN.P27.E42nd Option:Select the applicableMiddle Level optionfrom page 256:Add $145 for reversedReach-Terrace modules.Systems Supplement – 3/2013 allsteeloffice.com | 249.D Discontinued 12/31/2013*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage56H* x 42WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56423rd Option:Paint:P .EOrder tiles for back of unit separately.GSA SIN 711-1Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 42W Box/Box/File/Lateral/Wardrobe — RightMetal/Metal FT5642MMBI D A, I or S 240 33.1 $4263 $4455Metal/Metal FC5642MMBI D A, I or S 240 33.1 $4031 $421256H x 42W File/Box/Box/Lateral/Wardrobe — LeftMetal/Metal FT5642MMBJ D A, I or S 240 33.1 $4263 $4455Metal/Metal FC5642MMBJ D A, I or S 240 33.1 $4031 $42124th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FT5642MMBIA.XMANL.PR2.EL2nd Option:Select the applicable30"W Middle Level optionfrom page 256:Unable to reverse module.X .Bottom Level w/Integrated WardrobeSee specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height250 | Systems Supplement – 3/2013

Reach ® Storage56H* x 42WOrder tiles for back of unit separately.Bottom Level w/Integrated WardrobeGSA SIN 711-1See specification guidelines on page 237.Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 42W Lateral/Lateral/Wardrobe — RightMetal/Metal FT5642MMBK D A, I or S 240 33.1 $3790 $3982Metal/Metal FC5642MMBK D A, I or S 240 33.1 $3584 $3765OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56423rd Option:Paint:P .E56H x 42W Lateral/Lateral/Wardrobe — LeftMetal/Metal FT5642MMBL D A, I or S 240 33.1 $3790 $3982Metal/Metal FC5642MMBL D A, I or S 240 33.1 $3584 $37654th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.2nd Option:Select the applicable30"W Middle Level optionfrom page 256:Unable to reverse module.X .Example: FT5642MMBKA.XMANL.P02.ELD Discontinued 12/31/2013*Nominal heightSystems Supplement – 3/2013 allsteeloffice.com | 251REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage69H* x 42WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 69423rd Option:Select the applicableTop Level optionfrom page 257:.Order tiles for back of unit separately.GSA SIN 711-1Concensys “C”Bottom/Middle/Top Level or Terrace “T” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 42W Box/Box/File/Lateral/Door — RightMetal/Metal/Metal FT6942MMMBD D A, I or S 281 40.3 $3012 $3239Metal/Metal/Metal FC6942MMMBD D A, I or S 281 40.3 $2849 $3064Metal/Metal/Landscape FT6942MMLBD D A or S 281 40.3 $3012 $3239Metal/Metal/Landscape FC6942MMLBD D A or S 281 40.3 $2849 $306469H x 42W File/Box/Box/Lateral/Door — LeftMetal/Metal/Metal FT6942MMMBE D A, I or S 281 40.3 $3012 $3239Metal/Metal/Metal FC6942MMMBE D A, I or S 281 40.3 $2849 $3064Metal/Metal/Landscape FT6942MMLBE D A or S 281 40.3 $3012 $3239Metal/Metal/Landscape FC6942MMLBE D A or S 281 40.3 $2849 $306469H x 42W Lateral/LateralMetal/Metal/Metal FT6942MMMBA D A, I or S 281 40.3 $2259 $2486Metal/Metal/Metal FC6942MMMBA D A, I or S 281 40.3 $2137 $2352Metal/Metal/Landscape FT6942MMLBA D A or S 281 40.3 $2259 $2486Metal/Metal/Landscape FC6942MMLBA D A or S 281 40.3 $2137 $23524th Option:Paint:P .1st Option:Pull:A ArchI Integral (Metal/Metal/Metal only)S Square.5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverEExample: FC6942MMMBDA.MANL.TAN.P27.E42nd Option:Select the applicableMiddle Level optionfrom page 256:Add $145 for reversedReach-Terrace modules.252 | Systems Supplement – 3/2013.Bottom LevelSee specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height

Reach ® Storage69H* x 42WOrder tiles for back of unit separately.GSA SIN 711-1Concensys “C”Bottom/Middle/Top Level or Terrace “T” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 42W Lateral/Lateral/Door — RightBottom LevelSee specification guidelines on page 237.Metal/Metal/Metal FT6942MMMBF D A, I or S 281 40.3 $2537 $2764Metal/Metal/Metal FC6942MMMBF D A, I or S 281 40.3 $2400 $2615Metal/Metal/Landscape FT6942MMLBF D A or S 281 40.3 $2537 $2764Metal/Metal/Landscape FC6942MMLBF D A or S 281 40.3 $2400 $2615OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 69423rd Option:Select the applicableTop Level optionfrom page 257:.69H x 42W Lateral/Lateral/Door — LeftMetal/Metal/Metal FT6942MMMBG D A, I or S 281 40.3 $2537 $2764Metal/Metal/Metal FC6942MMMBG D A, I or S 281 40.3 $2400 $2615Metal/Metal/Landscape FT6942MMLBG D A or S 281 40.3 $2537 $2764Metal/Metal/Landscape FC6942MMLBG D A or S 281 40.3 $2400 $261569H x 42W Open ShelfMetal/Metal/Metal FT6942MMMBH D A, I or S 281 40.3 $1756 $1983Metal/Metal/Metal FC6942MMMBH D A, I or S 281 40.3 $1662 $1877Metal/Metal/Landscape FT6942MMLBH D A or S 281 40.3 $1756 $1983Metal/Metal/Landscape FC6942MMLBH D A or S 281 40.3 $1662 $18774th Option:Paint:P .1st Option:Pull:A ArchI Integral (Metal/Metal/Metal only)S Square.5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverEExample: FT6942MMMBGI.MDN.TEN.P272nd Option:Select the applicableMiddle Level optionfrom page 256:Add $145 for reversedReach-Terrace modules.Systems Supplement – 3/2013 allsteeloffice.com | 253.D Discontinued 12/31/2013*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage69H* x 42WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 69423rd Option:Select the applicableTop Level optionfrom page 257:.Order tiles for back of unit separately.GSA SIN 711-1Concensys “FC”Bottom/Middle/Top Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 42W Box/Box/File/Lateral/Wardrobe — RightMetal/Metal/Metal FT6942MMMBM D A, I or S 281 40.3 $4263 $4490Metal/Metal/Metal FC6942MMMBM D A, I or S 281 40.3 $4031 $4246Metal/Metal/Landscape FT6942MMLBM D A or S 281 40.3 $4263 $4490Metal/Metal/Landscape FC6942MMLBM D A or S 281 40.3 $4031 $424669H x 42W File/Box/Box/Lateral/Wardrobe — LeftMetal/Metal/Metal FT6942MMMBN D A, I or S 281 40.3 $4263 $4490Metal/Metal/Metal FC6942MMMBN D A, I or S 281 40.3 $4031 $4246Metal/Metal/Landscape FT6942MMLBN D A or S 281 40.3 $4263 $4490Metal/Metal/Landscape FC6942MMLBN D A or S 281 40.3 $4031 $42464th Option:Paint:P .1st Option:Pull:A ArchI Integral (Metal/Metal/Metal only)S Square.5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverEExample: FT6942MMMBMA.XMANL.TAN.PR3.E4Bottom Level w/Integrated Wardrobe2nd Option:Select the applicable30"W Middle Level optionfrom page 256:Unable to reverse module.X .See specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height254 | Systems Supplement – 3/2013

Reach ® Storage69H* x 42WOrder tiles for back of unit separately.GSA SIN 711-1Concensys “FC”Bottom/Middle/Top Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 42W Lateral/Lateral/Wardrobe — RightBottom Level w/Integrated WardrobeSee specification guidelines on page 237.Metal/Metal/Metal FT6942MMMBO D A, I or S 281 40.3 $3790 $4017Metal/Metal/Metal FC6942MMMBO D A, I or S 281 40.3 $3584 $3799Metal/Metal/Landscape FT6942MMLBO D A or S 281 40.3 $3790 $4017Metal/Metal/Landscape FC6942MMLBO D A or S 281 40.3 $3584 $3799OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 69423rd Option:Select the applicableTop Level optionfrom page 257:.69H x 42W Lateral/Lateral/Wardrobe — LeftMetal/Metal/Metal FT6942MMMBP D A, I or S 281 40.3 $3790 $4017Metal/Metal/Metal FC6942MMMBP D A, I or S 281 40.3 $3584 $3799Metal/Metal/Landscape FT6942MMLBP D A or S 281 40.3 $3790 $4017Metal/Metal/Landscape FC6942MMLBP D A or S 281 40.3 $3584 $37994th Option:Paint:P .1st Option:Pull:A ArchI Integral (Metal/Metal/Metal only)S Square.5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverEExample: FT6942MMMBOI.XMDN.TEN.P272nd Option:Select the applicable30"W Middle Level optionfrom page 256:Unable to reverse module.X .D Discontinued 12/31/2013*Nominal heightSystems Supplement – 3/2013 allsteeloffice.com | 255REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage42W OptionsOrder tiles for back of unit separately.42"W MIDDLE LEVEL OPTIONS — MetalTambour DoorGSA SIN 711-1Reversed*Component Option Code Terrace ConcensysDescription Option Code ($145 upcharge) List Price List PriceTranslucent – Non-ported MANL D AMNL* D$1382 $1184Cool Metallic – Non-ported MBNL D BMNL* D$1382 $1184Warm Metallic – Non-ported MCNL D CMNL* D$1382 $1184Milky White – Non-ported MFNL D FMNL* D$1382 $1184Translucent – Ported** MAP D$1313 $1118Cool Metallic – Ported** MBP D$1313 $1118Warm Metallic – Ported** MCP D$1313 $1118Milky White – Ported** MFP D$1313 $1118Open ShelvesNo Door – Non-ported MDN D DMN* D$ 753 $ 640No Door – Ported MDP D$ 770 $ 65430"W MIDDLE LEVEL OPTIONS FOR 42"W INTEGRATED WARDROBE — MetalTambour DoorTranslucent – Non-ported XMANL D$1279 $1090Cool Metallic – Non-ported XMBNL D$1279 $1090Warm Metallic – Non-ported XMCNL D$1279 $1090Milky White – Non-ported XMFNL D$1279 $1090Translucent – Ported** XMAP D$1204 $1023Cool Metallic – Ported** XMBP D$1204 $1023Warm Metallic – Ported** XMCP D$1204 $1023Milky White – Ported** XMFP D$1204 $1023Open ShelvesNo Door – Non-ported XMDN D$ 693 $ 589No Door – Ported XMDP D$ 711 $ 606* Reversed option available on Reach-Terrace units only.**Ported storage is only available as non-locking to comply with UL requirements.Middle LevelSee specification guidelines on page 237.D Discontinued 12/31/2013256 | Systems Supplement – 3/2013

Reach ® StorageTop Level42W Options GSA SIN 711-1Order tiles for back of unit separately.See specification guidelines on page 237.Component Reversed* PaintDescription Option Code Option Code List Price42"W TOP LEVEL OPTIONS — MetalFlipper DoorFull Depth – Non-ported TAN D ATN* D$ 81866/33 Split – Non-ported TEN D ETN* D$ 871NOTE: Option not available on 43"H storage modules.OVERHEADS & HUTCHES42"W TOP LEVEL OPTIONS — MetalOpen ShelfFull Depth – Non-ported TCN D CTN* D$ 61966/33 Split – Non-ported TGN D GTN* D$ 66842"W TOP LEVEL OPTIONS — LandscapeReady for Hinged Doors (order doors separately on page 271)Full Depth – Non-ported TDN D DTN* D$ 61966/33 Split – Non-ported THN D HTN* D$ 668NOTE: Option not available on 43"H storage modules.* Reversed option available on Reach-Terrace units only.D Discontinued 12/31/2013REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 257

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage43H* x 48WHow to specify —Select theBase Model Numberfrom above.FT43483rd Option:Paint:P .EOrder tiles for back of unit separately.Bottom/Top Level Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price43H x 48W Box/Box/File/Lateral/Door — RightMetal/Metal FT4348MMBD D A, I or S 207 29.3 $3102 $325843H x 48W File/Box/Box/Lateral/Door — LeftMetal/Metal FT4348MMBE D A, I or S 207 29.3 $3102 $32584th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FT4348MMBDI.TCN.P022nd Option:Select the applicableOpen Shelf Top Leveloption from page 269:258 | Systems Supplement – 3/2013.Bottom LevelGSA SIN 711-1See specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height

Reach ® Storage43H* x 48WOrder tiles for back of unit separately.Bottom/Top Level Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price43H x 48W Lateral/Lateral/Door — RightBottom LevelGSA SIN 711-1See specification guidelines on page 237.Metal/Metal FT4348MMBF D A, I or S 207 29.3 $2618 $2774OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.FT43483rd Option:Paint:P .E43H x 48W Lateral/Lateral/Door — LeftMetal/Metal FT4348MMBG D A, I or S 207 29.3 $2618 $277443H x 48W Open ShelfMetal/Metal FT4348MMBH D A, I or S 207 29.3 $1787 $19434th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS SquareExample: FT4348MMBF.TCN.P02.2nd Option:Select the applicableOpen Shelf Top Leveloption from page 269:Systems Supplement – 3/2013 allsteeloffice.com | 259.D Discontinued 12/31/2013*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage56H* x 48WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56483rd Option:Paint:P .EOrder tiles for back of unit separately.Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 48W Box/Box/File/Lateral/Door — RightMetal/Metal FT5648MMBD D A, I or S 268 37.6 $3102 $3294Metal/Metal FC5648MMBD D A, I or S 268 37.6 $2933 $311456H x 48W File/Box/Box/Lateral/Door — LeftMetal/Metal FT5648MMBE D A, I or S 268 37.6 $3102 $3294Metal/Metal FC5648MMBE D A, I or S 268 37.6 $2933 $31144th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FC5648MMBDA.MANL.P27.E42nd Option:Select the applicableMiddle Level optionfrom page 268:Add $145 for reversedReach-Terrace modules.260 | Systems Supplement – 3/2013.Bottom LevelGSA SIN 711-1See specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height

Reach ® Storage56H* x 48WOrder tiles for back of unit separately.Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 48W Lateral/Lateral/Door — RightBottom LevelGSA SIN 711-1See specification guidelines on page 237.Metal/Metal FT5648MMBF D A, I or S 268 37.6 $2618 $2810Metal/Metal FC5648MMBF D A, I or S 268 37.6 $2476 $2657OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56483rd Option:Paint:P .E56H x 48W Lateral/Lateral/Door — LeftMetal/Metal FT5648MMBG D A, I or S 268 37.6 $2618 $2810Metal/Metal FC5648MMBG D A, I or S 268 37.6 $2476 $265756H x 48W Open ShelfMetal/Metal FT5648MMBH D A, I or S 268 37.6 $1787 $1979Metal/Metal FC5648MMBH D A, I or S 268 37.6 $1691 $18724th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FC5648MMBFA.MANL.P27.E42nd Option:Select the applicableMiddle Level optionfrom page 268:Add $145 for reversedReach-Terrace modules.Systems Supplement – 3/2013 allsteeloffice.com | 261.D Discontinued 12/31/2013*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage56H* x 48WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56483rd Option:Paint:P .EOrder tiles for back of unit separately.Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 48W Box/Box/File/Lateral/Wardrobe — RightMetal/Metal FT5648MMBI D A, I or S 268 37.6 $4351 $4543Metal/Metal FC5648MMBI D A, I or S 268 37.6 $4115 $429656H x 48W File/Box/Box/Lateral/Wardrobe — LeftMetal/Metal FT5648MMBJ D A, I or S 268 37.6 $4351 $4543Metal/Metal FC5648MMBJ D A, I or S 268 37.6 $4115 $42964th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.Example: FT5648MMBJA.XMANL.PR2.EL2nd Option:Select the applicable36"W Middle Level optionfrom page 268:Unable to reverse module.X .Bottom Level w/Integrated WardrobeGSA SIN 711-1See specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height262 | Systems Supplement – 3/2013

Reach ® Storage56H* x 48WOrder tiles for back of unit separately.Concensys “FC”Bottom/Middle Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price56H x 48W Lateral/Lateral/Wardrobe — RightBottom Level w/Integrated WardrobeGSA SIN 711-1See specification guidelines on page 237.Metal/Metal FT5648MMBK D A, I or S 268 37.6 $3867 $4059Metal/Metal FC5648MMBK D A, I or S 268 37.6 $3657 $3838OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 56483rd Option:Paint:P .E56H x 48W Lateral/Lateral/Wardrobe — LeftMetal/Metal FT5648MMBL D A, I or S 268 37.6 $3867 $4059Metal/Metal FC5648MMBL D A, I or S 268 37.6 $3657 $38384th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte Silver1st Option:Pull:A ArchI IntegralS Square.2nd Option:Select the applicable36"W Middle Level optionfrom page 268:Unable to reverse module.X .Example: FT5648MMBKA.XMANL.PR2.ELD Discontinued 12/31/2013*Nominal heightSystems Supplement – 3/2013 allsteeloffice.com | 263REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage69H* x 48WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 6 9 4 83rd Option:Select the applicableTop Level optionfrom page 269:.Order tiles for back of unit separately.Concensys “FC”Bottom/Middle/Top Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 48W Box/Box/File/Lateral/Door — RightMetal/Metal/Metal FT6948MMMBD D A, I or S 309 45.8 $3102 $3329Metal/Metal/Metal FC6948MMMBD D A, I or S 309 45.8 $2933 $3148Metal/Metal/Landscape FT6948MMLBD D A or S 309 45.8 $3102 $3329Metal/Metal/Landscape FC6948MMLBD D A or S 309 45.8 $2933 $314869H x 48W File/Box/Box/Lateral/Door — LeftBottom LevelGSA SIN 711-1See specification guidelines on page 237.Metal/Metal/Metal FT6948MMMBE D A, I or S 309 45.8 $3102 $3329Metal/Metal/Metal FC6948MMMBE D A, I or S 309 45.8 $2933 $3148Metal/Metal/Landscape FT6948MMLBE D A or S 309 45.8 $3102 $3329Metal/Metal/Landscape FC6948MMLBE D A or S 309 45.8 $2933 $31484th Option:Paint:P .1st Option:Pull:A ArchI Integral (Metal/Metal/Metal only)S Square.5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverEExample: FT6948MMMBDI.MANL.TAN.P272nd Option:Select the applicableMiddle Level optionfrom page 268:Add $145 for reversedReach-Terrace modules.264 | Systems Supplement – 3/2013.D Discontinued 12/31/2013*Nominal height

Reach ® Storage69H* x 48WOrder tiles for back of unit separately.69H x 48W Lateral/Lateral/Door — RightBottom LevelGSA SIN 711-1See specification guidelines on page 237.Concensys “FC”Bottom/Middle/Top Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List PriceMetal/Metal/Metal FT6948MMMBF D A, I or S 309 45.8 $2618 $2845Metal/Metal/Metal FC6948MMMBF D A, I or S 309 45.8 $2476 $2691Metal/Metal/Landscape FT6948MMLBF D A or S 309 45.8 $2618 $2845Metal/Metal/Landscape FC6948MMLBF D A or S 309 45.8 $2476 $2691OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 69483rd Option:Select the applicableTop Level optionfrom page 269:.69H x 48W Lateral/Lateral/Door — LeftMetal/Metal/Metal FT6948MMMBG D A, I or S 309 45.8 $2618 $2845Metal/Metal/Metal FC6948MMMBG D A, I or S 309 45.8 $2476 $2691Metal/Metal/Landscape FT6948MMLBG D A or S 309 45.8 $2618 $2845Metal/Metal/Landscape FC6948MMLBG D A or S 309 45.8 $2476 $269169H x 48W Open ShelfMetal/Metal/Metal FT6948MMMBH D A, I or S 309 45.8 $1787 $2014Metal/Metal/Metal FC6948MMMBH D A, I or S 309 45.8 $1691 $1906Metal/Metal/Landscape FT6948MMLBH D A or S 309 45.8 $1787 $2014Metal/Metal/Landscape FC6948MMLBH D A or S 309 45.8 $1691 $19064th Option:Paint:P .1st Option:Pull:A ArchI Integral (Metal/Metal/Metal only)S Square.5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverEExample: FC6948MMMBGA.MDN.TCN.P4J.EL2nd Option:Select the applicableMiddle Level optionfrom page 268:Add $145 for reversedReach-Terrace modules.Systems Supplement – 3/2013 allsteeloffice.com | 265.D Discontinued 12/31/2013*Nominal heightREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage69H* x 48WHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 6 9 4 83rd Option:Select the applicableTop Level optionfrom page 269:.Order tiles for back of unit separately.Concensys “FC”Bottom/Middle/Top Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 48W Box/Box/File/Lateral/Wardrobe — RightMetal/Metal/Metal FT6948MMMBM D A, I or S 309 45.8 $4351 $4578Metal/Metal/Metal FC6948MMMBM D A, I or S 309 45.8 $4115 $4330Metal/Metal/Landscape FT6948MMLBM D A or S 309 45.8 $4351 $4578Metal/Metal/Landscape FC6948MMLBM D A or S 309 45.8 $4115 $433069H x 48W File/Box/Box/Lateral/Wardrobe — LeftBottom Level w/Integrated WardrobeGSA SIN 711-1See specification guidelines on page 237.Metal/Metal/Metal FT6948MMMBN D A, I or S 309 45.8 $4351 $4578Metal/Metal/Metal FC6948MMMBN D A, I or S 309 45.8 $4115 $4330Metal/Metal/Landscape FT6948MMLBN D A or S 309 45.8 $4351 $4578Metal/Metal/Landscape FC6948MMLBN D A or S 309 45.8 $4115 $43304th Option:Paint:P .1st Option:Pull:A ArchI Integral (Metal/Metal only)S Square.5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverE2nd Option:Select the applicable36"W Middle Level optionfrom page 268:Unable to reverse module.X .Example: FT6948MMMBMI.XMANL.TAN.P27.E4D Discontinued 12/31/2013*Nominal height266 | Systems Supplement – 3/2013

Reach ® Storage69H* x 48WOrder tiles for back of unit separately.Concensys “FC”Bottom/Middle/Top Level or Terrace “FT” Pull Ship Core Paint SelectDescription Model Option Weight Cubes List Price List Price69H x 48W Lateral/Lateral/Wardrobe — RightBottom Level w/Integrated WardrobeGSA SIN 711-1See specification guidelines on page 237.Metal/Metal/Metal FT6948MMMBO D A, I or S 309 45.8 $3867 $4094Metal/Metal/Metal FC6948MMMBO D A, I or S 309 45.8 $3657 $3872Metal/Metal/Landscape FT6948MMLBO D A or S 309 45.8 $3867 $4094Metal/Metal/Landscape FC6948MMLBO D A or S 309 45.8 $3657 $3872OVERHEADS & HUTCHESHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F 69483rd Option:Select the applicableTop Level optionfrom page 269:.69H x 48W Lateral/Lateral/Wardrobe — LeftMetal/Metal/Metal FT6948MMMBP D A, I or S 309 45.8 $3867 $4094Metal/Metal/Metal FC6948MMMBP D A, I or S 309 45.8 $3657 $3872Metal/Metal/Landscape FT6948MMLBP D A or S 309 45.8 $3867 $4094Metal/Metal/Landscape FC6948MMLBP D A or S 309 45.8 $3657 $38724th Option:Paint:P .1st Option:Pull:A ArchI Integral (Metal/Metal only)S Square.5th Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverE2nd Option:Select the applicable36"W Middle Level optionfrom page 268:Unable to reverse module.X .Example: FT6948MMMBOA.XMDN.TCN.P4J.ELD Discontinued 12/31/2013*Nominal heightSystems Supplement – 3/2013 allsteeloffice.com | 267REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® Storage48W OptionsOrder tiles for back of unit separately.48"W MIDDLE LEVEL OPTIONS — MetalTambour DoorGSA SIN 711-1Reversed*Component Option Code Terrace ConcensysDescription Option Code ($145 upcharge) List Price List PriceTranslucent – Non-ported MANL D AMNL* D$1446 $1239Cool Metallic – Non-ported MBNL D BMNL* D$1446 $1239Warm Metallic – Non-ported MCNL D CMNL* D$1446 $1239Milky White – Non-ported MFNL D FMNL* D$1446 $1239Translucent – Ported** MAP D$1376 $1171Cool Metallic – Ported** MBP D$1376 $1171Warm Metallic – Ported** MCP D$1376 $1171Milky White – Ported** MFP D$1376 $1171Open ShelvesNo Door – Non-ported MDN D DMN* D$ 781 $ 662No Door – Ported MDP D$ 796 $ 67836"W MIDDLE LEVEL OPTIONS FOR 48"W INTEGRATED WARDROBE — MetalTambour DoorTranslucent – Non-ported XMANL D$1320 $1133Cool Metallic – Non-ported XMBNL D$1320 $1133Warm Metallic – Non-ported XMCNL D$1320 $1133Milky White – Non-ported XMFNL D$1320 $1133Translucent – Ported** XMAP D$1249 $1063Cool Metallic – Ported** XMBP D$1249 $1063Warm Metallic – Ported** XMCP D$1249 $1063Milky White – Ported** XMFP D$1249 $1063Open ShelvesNo Door – Non-ported XMDN D$ 722 $ 618No Door – Ported XMDP D$ 741 $ 632* Reversed option available on Reach-Terrace units only.**Ported storage is only available as non-locking to comply with UL requirements.Middle LevelSee specification guidelines on page 237.D Discontinued 12/31/2013268 | Systems Supplement – 3/2013

Reach ® Storage48W OptionsGSA SIN 711-1Order tiles for back of unit separately.See specification guidelines on page 237.Component Reversed* Terrace ConcensysDescriptions Option Code Option Code List Price List Price48"W TOP LEVEL OPTIONS — MetalFlipper DoorTop LevelFull Depth – Non-ported TAN D ATN* D$ 842 $ 79666/33 Split – Non-ported TEN D ETN* D$ 892 $ 842NOTE: Option not available on 43"H storage modules.OVERHEADS & HUTCHES48"W TOP LEVEL OPTIONS — MetalOpen ShelfFull Depth – Non-ported TCN D CTN* D$ 641 $ 60666/33 Split – Non-ported TGN D GTN* D$ 689 $ 65248"W TOP LEVEL OPTIONS — LandscapeReady for Doors (order doors separately on page 571)Full Depth – Non-ported TDN D DTN* D$ 641 $ 60666/33 Split – Non-ported THN D HTN* D$ 689 $ 652NOTE: Option not available on 43"H storage modules.* Reversed option available on Reach-Terrace units only.D Discontinued 12/31/2013REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 269

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® StorageHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.4F W 2 4Wardrobe CabinetsGSA SIN 711-1Concensys “FC”Bottom/Top Level or Terrace “FT” Ship Core Paint SelectDescription Model Weight Cubes List Price List Price56H* x 24W Wardrobe Cabinets — Ready for DoorsWardrobe Shell** F b W5624 D151 25 $2374 $2486**Must order Metal or Landscape doors separately. 2 doors required (one for each side of unit). See page 271.69H* x 24W Wardrobe Cabinets — Ready for DoorsWardrobe Shell** F b W6924 D162 27 $2592 $2726**Must order Metal or Landscape doors separately. 2 doors required (one for each side of unit). See page 271.1st Option:Paint:P .Examples: FCW5624.P27FTW6924.P4JSee specification guidelines on page 237.D Discontinued 12/31/2013*Nominal height270 | Systems Supplement – 3/2013

Reach ® StorageLandscape DoorsGSA SIN 711-1See specification guidelines on page 237.Pull ShipDescription Model Option Weight Cubes List Price36"W Landscape Doors for Hinged Door Top Modules (non-locking)Frequency FLD1336FQ D A or S 6.5 1.1 $ 971Infinite Spectrum FLD1336SP D A or S 6.5 1.1 $ 937Pearlescent Strata FLD1336PS D A or S 6.5 1.1 $1005NOTE: Frequency and Pearlescent Strata patterns run horizontally on Hinged Doors.OVERHEADS & HUTCHESpatterns run vertically56"H Doorpatterns run vertically69"H DoorHow to specify —Select theBase Model Numberfrom above.PrefixFC ConcensysFT Terrace 2.6 or 3.41st Option:Pantone Color:Infinite SpectrumUse print or paints andinteriors color guidenumber. See page 126.42"W Landscape Doors for Hinged Door Top Modules (non-locking)Frequency FLD1342FQ D A or S 7.0 1.1 $1023Infinite Spectrum FLD1342SP D A or S 7.0 1.1 $ 988Pearlescent Strata FLD1342PS D A or S 7.0 1.1 $1056NOTE: Frequency and Pearlescent Strata patterns run horizontally on Hinged Doors.48"W Landscape Doors for Hinged Door Top Modules (non-locking)Frequency FLD1348FQ D A or S 9.0 1.6 $1339Infinite Spectrum FLD1348SP D A or S 9.0 1.6 $1306Pearlescent Strata FLD1348PS D A or S 9.0 1.6 $1371NOTE: Frequency and Pearlescent Strata patterns run horizontally on Hinged Doors.Concensys “C”or Terrace “T” Pull Ship SelectDescription Model Option Weight Cubes List Price List Price56"H* x 24"W Doors for Storage Wardrobe (non-locking)Metal F b MD5624 D A, I or S 30.0 3.3 $ 605 $ 645Frequency F b LD5624FQ D A or S 12.0 3.3 $1439 N/AInfinite Spectrum F b LD5624SP D A or S 12.0 3.3 $1405 N/APearlescent Strata F b LD5624PS D A or S 12.0 3.3 $1471 N/ANOTE: Frequency and Pearlescent Strata patterns run vertically on Storage Wardrobe doors. Doors are non-handed.69"H* x 24"W Doors for Storage Wardrobe (non-locking)Metal F b MD6924 D A, I or S 33.0 4.0 $ 638 $ 693Frequency F b LD6924FQ D A or S 14.0 4.0 $1624 N/AInfinite Spectrum F b LD6924SP D A or S 14.0 4.0 $1591 N/APearlescent Strata F b LD6924PS D A or S 14.0 4.0 $1655 N/ANOTE: Frequency and Pearlescent Strata patterns run vertically on Storage Wardrobe doors. Doors are non-handed...1st Option:Paint(Metal doors only):P .2nd Option:Pull Color:Arch Pull:E4 BlackEL Matte SilverSquare Pull:EL Matte SilverEExamples: FLD1336SPA.19-1759TPX.EL1st Option:Color:FrequencyFQ01 PlatinumFQ02 ParchmentFTLD5624FQA.FQ01.E4*Nominal heightSystems Supplement – 3/2013 allsteeloffice.com | 271.Pearlescent StrataPS01 GlacierPS02 ShadowPS03 SeafoamPS04PS05PS07D Discontinued 12/31/2013ShellTortoiseQuartzREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESNotes272 | Systems Supplement – 3/2013

Reach ® StorageAdjustable Shelf• Shelf is 1" thick.• Adjustable in 2" increments from9 1 ⁄2"-15 1 ⁄2"H.• Load capacity:– Middle Module· 30"W — 70 lbs.· 36"W — 85 lbs.· 42"W — 100 lbs.· 48"W — 114 lbs.– Bottom Module — 28 lbs.– Wardrobe — 28 lbs.Side Shelf• Ships in sets of 3.• Load capacity — 20 lbs.Pull-out Shelf• Shelf is 16"D.• Load capacity — 60 lbs.AccessoriesGSA SIN 711-1OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.F .Ship Core Paint SelectDescription Model Weight Cubes List Price List PriceAdjustable Shelf — for Middle Module30"W x 12"D FAS30 7.0 2.5 $ 111 $ 12236"W x 12"D FAS36 8.0 2.5 $ 114 $ 12542"W x 12"D FAS42 9.0 2.5 $ 117 $ 12848"W x 12"D FAS48 11.0 3.0 $ 121 $ 132Adjustable Shelf — for Bottom Module Cabinet DoorDoor Unit Only — 10 1 ⁄2"W x 12 1 ⁄4"D FAS11 D5.0 2.0 $ 65 $ 76Adjustable Shelf — for 24" W Wardrobe24"W x 9"D FAS24 5.0 2.0 $ 65 $ 76Side ShelvesSet of 3 — 13 1 ⁄2"W x 10"D FSS 6.0 0.5 $ 210 $ 221Pull-out Shelf30"W FPS30 7.0 2.5 $ 219 $ 23036"W FPS36 8.0 2.5 $ 225 $ 23642"W FPS42 9.0 2.5 $ 230 $ 24148"W FPS48 11.0 3.0 $ 236 $ 2471st Option:Paint:See inside frontcover for finishes.P .Examples: FAS24.P02D Discontinued 12/31/2013Systems Supplement – 3/2013 allsteeloffice.com | 273REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Terrace ® 2.6“M” Middle Panel Frame — 20"W• Use between Reach storage units to allowTerrace 2.6 wing panel runs.• Includes top cap and connecting hardware.“E” End Panel Frame — 20"W• Use at end of Reach storage run to allowTerrace 2.6 wing panel runs.• Includes top cap, one kickplate, andconnecting hardware.How to specify —Select theModel Numberfrom above.TN Painted Top CapTC Veneer Top CapT . PShipListDescription Model Weight Cubes Price13" H Stacking Frames for Terrace 2.6Stacking Frames — 20"W• For use with Terrace 2.6 Reach “M” or “E”frames.• Includes attaching hardware.• Black only.• Uses top cap from base panel.FramesPainted Top CapVeneer Top CapShip Core Paint Select Core Paint SelectDescription Model Weight Cubes List Price List Price List Price List Price“M” Middle Panel Frame43"H T b 14320M D 11 3.2 $ 440 $ 454 $ 551 $ 56556"H T b 15620M D 15 4.1 $ 466 $ 480 $ 576 $ 59069"H T b 16920M D 18 5.0 $ 484 $ 498 $ 594 $ 608NOTE: “M” panel frame must match the height of tallest adjacent storage unit.“E” End Panel Frame43"H T b 14320E D 11 3.2 $ 440 $ 467 $ 551 $ 57856"H T b 15620E D 15 4.1 $ 466 $ 493 $ 576 $ 60369"H T b 16920E D 18 5.0 $ 484 $ 511 $ 594 $ 621NOTE: “E” panel frame must match the height of adjacent storage unit.20"W TN01320 D8 S 1.1 $ 2791st Option:Paint(if applicable):See inside frontcover for finishes.2nd Option:Veneer Typeand Finish(if applicable):See inside frontcover for finishes.C prefix for CleargrainN prefix for NaturalExamples: TN14320M.PR2 TC14320E.PR3.NC215 TN01320For specification details refer to:Working with Reach and Terrace, pages 230-238NOTE: Order 20"W Terrace 2.6 tilesseparately on pages 118-139.GSA SIN 711-1D Discontinued 12/31/2013274 | Systems Supplement – 3/2013

Reach ® — Terrace ® 2.6Metal Finished End Panel• Use at end of Reach storage run when wingpanels are not utilized. Finishes end of storageunit.• Adds 7 ⁄8" to storage run.In-Line Connector for 2.6• Allows an in-line connection of Reach storageand Terrace 2.6 frame (adds 1 ⁄16" to run).• Requires In-Line Metal Finished End Panel(order separately). See #4 on page 234.• Use with painted or veneer top caps.Metal Ends and ConnectorsGSA SIN 711-1For specification details refer to:Working with Reach and Terrace, pages 230-238In-Line Metal Finished End — 2.6• Use at end of Reach storage run when In-LineConnector is utilized. Finishes end of storageunit. See #3 on page 234.• Adds 7 ⁄8" to storage run.OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.Ship Core Paint SelectDescription Model Weight Cubes List Price List PriceMetal Finished End — Painted43"H FTN43SE D20 3.2 $ 235 $ 27956"H FTN56SE D23 4.1 $ 250 $ 29469"H FTN69SE D25 5.0 $ 269 $ 313In-Line Connector — for Terrace 2.643"H FTN343N D4 0.5 $ 184 $ 18456"H FTN356N D5 0.6 $ 198 $ 19869"H FTN369N D6 0.8 $ 198 $ 198In-Line Metal Finished End for Terrace 2.6 — Painted43"H FTN43NE D2.0 3.2 $ 235 $ 27956"H FTN56NE D2.3 4.1 $ 250 $ 29469"H FTN69NE D2.5 5.0 $ 269 $ 313. P1st Option:Paint:See inside frontcover for finishes.Example: FTN43SE.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 275SD Discontinued 12/31/2013REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Terrace ® 2.6NOTE: Reach storage units ship with eitherthin or thick tile attachment kits. Quantity andtype of kits included with each unit assumesadjacent unit is configured the same androtated 180 degrees. If adjacent unit is different,a kit of the opposite thickness may need to beordered separately for best aesthetics.69"H unit withreversed middlemodule ships with5 attachment kits;4 thin and 1 thickor 5 thin.How to specify —Select theModel Numberfrom above.FTK .ShipDescription Model Weight Cubes List PriceExample: FTK136.P01Tile Attachment Kits• Thin Tile Attachment Kits cap off the uppermodule tile when adjacent to a flipper orhinged door module.• Thin Tile Attachment Kits are used in everylocation below top module of storage unit.• Thick Tile Attachment Kits cap off the uppermodule tile adjacent to a tambour door or anopen shelf.Tile Attachment KitsGSA SIN 711-1For specification details refer to:Working with Reach and Terrace, pages 230-238Tile Attachment Kits — Thin36"W FTK136 D1 0.1 $ 4242"W FTK142 D1 0.1 $ 4248"W FTK148 D1 0.1 $ 42NOTE: Used when top module is adjacent to flipper or hinged door module.Tile Attachment Kits — Thick36"W FTK236 D1 0.1 $ 4242"W FTK242 D1 0.1 $ 4248"W FTK248 D1 0.1 $ 42NOTE: Used when top module is adjacent to tambour or open module.1st Option:HorizontalPaint Color:See inside frontcover for finishes.PThin TileAttachment Kit —ships with storageunits specified witha flipper or hingeddoor module.Thick TileAttachment Kit —ships with storageunits specified withtambour door oropen module.D Discontinued 12/31/2013276 | Systems Supplement – 3/2013

Reach ® — Terrace ® 2.6Tool Tiles for Reach• Sturdy aluminum extrusion with steel supportconstruction.• Powder-coated for durable finish.• Work Tools to be hung from this tile availablein Extensions section of this pricer.• Use in place of a standard 13"H tile on backside of Reach storage at top most position orbelow an open top shelf. For other locationsuse standard tool tile — see page 124.• Weight capacity not to exceed 80 lbs.Tool Tiles for ReachTool Tile shown with Work Tools(Work Tools on pages 330-331)GSA SIN 711-1OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.TN413 .ShipSelectDescription Model Weight Cubes List Price List Price13"H Tool Tiles — used to support Extensions paper management accessories36"W TN41336SWF D D14 S 0.642"W TN41342SWF D D16 S 0.748"W TN41348SWF D D19 S 0.7NOTE: For locations other than top most position, use standard tool tiles from page 124 (no “F” suffix).1st Option:Tool TilePaint Color:See inside frontcover for finishes.PExample: TN41324SWF.P02D D Discontinued 2/12/2012S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 277D DD DD DD DD DD DD Discontinued 12/31/2013REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Terrace ® 3.4“M” Middle Panel Frame — 3.4• Use between Reach storage units to allowTerrace 3.4 wing panel runs.• Includes top cap and connecting hardware.“E” End Panel Frame — 3.4• Use at end of Reach storage run to allowTerrace 3.4 wing panel runs.• Includes top cap, one kickplate, andconnecting hardware.How to specify —Select theModel Numberfrom above.T Flat PaintedR Radius PaintedV Radius VeneerT . PFramesFlat Top Cap Radius Top Cap Veneer Top CapShip Core Paint Select Core Paint Select Core Paint SelectDescription Model Weight Cubes List Price List Price List Price List Price List Price List Price“M” Middle Panel Frame43"H T b 14320M D 16 S 2.7 $ 520 $ 534 $ 563 $ 577 $ 674 $ 68856"H T b 15620M D 17 3.4 $ 602 $ 616 $ 647 $ 661 $ 759 $ 77369"H T b 16920M D 20 4.2 $ 683 $ 697 $ 727 $ 741 $ 838 $ 852NOTE: “M” panel frame must match the height of tallest adjacent storage unit.“E” End Panel Frame — 20"W43"H T b 14320E D 16 S 2.7 $ 520 $ 547 $ 563 $ 590 $ 674 $ 70156"H T b 15620E D 17 3.4 $ 602 $ 629 $ 647 $ 674 $ 759 $ 78669"H T b 16920E D 20 4.2 $ 683 $ 710 $ 727 $ 754 $ 838 $ 865NOTE: “E” panel frame must match the height of adjacent storage unit.Segment Kits20"W TT220S D 4 S 0.4 $ 531st Option:Paint(if applicable):See inside frontcover for finishes.Stacking Frames — 20"W• For use with Terrace 3.4 Reach“M” or “E” frames.• Includes attaching hardware.• Black only.• Uses top cap from base panel.Segment Kits• Formed steel cross members.• Includes attaching hardware.• Black only.2nd Option:Veneer Finish(if applicable):See inside frontcover for finishes.GSA SIN 711-1For specification details refer to:Working with Reach and Terrace, pages 230-238NOTE: Order 20"W Terrace 3.4 tilesseparately on pages 57-80.3 Top Cap OptionsT Flat Painted R Radius Painted V Radius VeneerShipDescription Model Weight Cubes List Price13" H Stacking Frames for Terrace 3.420"W TT01320 D7 S 0.9 $ 381D Discontinued 12/31/2013Examples: TT14320M.PR2 TV16920E.P27.CC511S Shippable by small-package carrier.278 | TT220S TT01320Systems Supplement – 3/2013

Reach ® — Terrace ® 3.4Metal Finished End Panel• Use at end of Reach storage run when wingpanels are not utilized. Finishes end of storageunit.• Adds 7 ⁄8" to storage run.In-Line Connector for 3.4• Allows an in-line connection of Reach storageand Terrace 3.4 frame (adds 1 ⁄16" to run).• Requires In-Line Metal Finished End Panel(order separately). See #4 on page 234.• Use with painted or veneer top caps.Metal Ends and ConnectorsGSA SIN 711-1For specification details refer to:Working with Reach and Terrace, pages 230-238In-Line Metal Finished End — 3.4• Use at end of Reach storage run when In-LineConnector is utilized. Finishes end of storageunit. See #3 on page 234.• Adds 7 ⁄8" to storage run.OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.Ship Core Paint SelectDescription Model Weight Cubes List Price List PriceMetal Finished End for Terrace — Painted43"H FTN43SE D20 3.2 $ 235 $ 27956"H FTN56SE D23 4.1 $ 250 $ 29469"H FTN69SE D25 5.0 $ 269 $ 313In-Line Connector for Terrace 3.4FT . P43"H FTT343N D4 S 0.5 $ 195 $ 19556"H FTT356N D5 S 0.6 $ 211 $ 21169"H FTT369N D6 S 0.8 $ 211 $ 211In-Line Metal Finished End for Terrace 3.4 — Painted43"H FTT43NE D20 3.2 $ 249 $ 29356"H FTT56NE D23 4.1 $ 268 $ 31269"H FTT69NE D25 5.0 $ 284 $ 3281st Option:Paint:See inside frontcover for finishes.Example: FTN43SE.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 279SD Discontinued 12/31/2013REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Terrace ® 3.4NOTE: The mounting of standard Terrace 3.4tiles on Reach units require Thick TileAttachment Kits at the top of each tile run.When segmenting 3.4 tiles on Reach storageunits, special segment kits are required toprovide 3.4 reveals (order separately).69”H unit with reversed middle module requires:• 3 Thick Tile Attachment Kits• 2 Beltline/Bottom Segment Kits• 1 Standard Segment KitThickStandardBeltline/BottomHow to specify —Select theModel Numberfrom above.FT .ShipDescription Model Weight Cubes List PriceExamples: FTT236SB.P27Reach Segment Kits• Segment kits are not included with ReachTerrace 3.4 storage unit and need to beordered separately. Quantity required variesbased on tile configuration.• Reach “B” Beltline/Bottom Kit for beltline orto support bottom of a 3.4 tile run other thaninitial tile at base rail.• Reach “S” Standard Kits for reveal between3.4 tiles. (See illustration below.)• Segment kits are black only.FTK236.P4JReach Segment KitsGSA SIN 711-1For specification details refer to:Working with Reach and Terrace, pages 230-238Tile Attachment Kits• Thick Tile Attachment Kits cap off the uppertile. (See illustration below.)• Thin Tile Attachment Kits are not used withTerrace 3.4 storage units. (See illustrationbelow.)Reach Segment Kits — Beltline/Bottom36"W FTT236SB D5.0 S 0.5 $ 9142"W FTT242SB D5.0 S 0.5 $ 9748"W FTT248SB D6.0 S 0.6 $ 111NOTE: Required at beltline or to support bottom of tile run other than initial tile at base rail.Reach Segment Kits — Standard36"W FTT236SS D5.0 S 0.5 $ 9142"W FTT242SS D5.0 S 0.5 $ 9748"W FTT248SS D6.0 S 0.6 $ 111Tile Attachment Kits — Thick36"W FTK236 D1 S 0.1 $ 4242"W FTK242 D1 S 0.1 $ 4248"W FTK248 D1 S 0.1 $ 42NOTE: Used when top module is adjacent to tambour or open module.1st Option:Paint Color:Segment Kitsavailable inBlack only.PThickBeltline/BottomThickThick TileAttachment Kit —ships with storageunits specified withtambour door oropen top module.Beltline/BottomSegment Kitrequired atbeltline withTerrace 3.4.Shippable by small-package carrier.280 | Systems Supplement – 3/2013SD Discontinued 12/31/2013

Reach ® — Terrace ® 3.4Tool Tiles for Reach• Sturdy aluminum extrusion with steel supportconstruction.• Powder-coated for durable finish.• Work Tools to be hung from this tile availablein Extensions section of this pricer.• Use in place of a standard 13"H tile on theback side of Reach storage at top mostposition or below an open top shelf. Forother locations use standard tool tile —see page 66.Tool Tiles for ReachTool Tile shown with Work Tools(Work Tools on pages 330-331)GSA SIN 711-1OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.TT4 SWF .ShipSelectDescription Model Weight Cubes List Price List Price13"H Tool Tiles — used to support Extensions paper management accessories36"W TT41336SWF D14 S 0.6 $ 291 $ 32742"W TT41342SWF D16 S 0.7 $ 308 $ 34448"W TT41348SWF D19 S 0.7 $ 330 $ 366NOTE: For locations other than top most position, use standard tool tiles page 66.1st Option:Tool TilePaint Color:See inside frontcover for finishes.PExample: TT41336SWF.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 281SD Discontinued 12/31/2013REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Concensys ®“M” Middle Panel Frame• Use between Reach storage units to allowConcensys wing panel runs.• Includes top cap and connecting hardware.“E” End Panel Frame• “E” End panel frames ship with onemonolithic tiled side.• Use at end of Reach storage run to allowConcensys wing panel runs.• Includes top cap, kickplate, and connectinghardware.How to specify —Select theModel Numberfrom above.89 .ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 613" H Stacking Frames for ConcensysPanelsTop Ship Core Paint SelectDescription Model Cap Weight Cubes List Price List Price“M” Middle Panel Frame — Low Profile, Painted Top Cap56"H 895620M P D 15 4.1 $ 410 $ 421W D 15 4.1 $ 522 $ 53369"H 896920M P D 18 5.0 $ 424 $ 435W D 18 5.0 $ 536 $ 547NOTE: “M” panel frame must match the height of adjacent storage units.Top Ship List PriceDescription Model Cap Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6“E” End Panel Frame — Low Profile, Painted Top Cap56"H 895620E P D 22 4.1 $ 542 $ 563 $ 577 $ 621 $ 665 $ 719W D 22 4.1 $ 654 $ 675 $ 689 $ 733 $ 777 $ 83169"H 896920E P D 28 5.0 $ 602 $ 626 $ 649 $ 710 $ 767 $ 839W D 28 5.0 $ 714 $ 738 $ 761 $ 822 $ 879 $ 951NOTE: “E” panel frame must match the height of adjacent storage unit.20"W 891320SF D 10 S 0.7 $ 232 $ 256 $ 268 $ 327 $ 369 $ 4331st Option:Fabric(“E” Panel Frame only):See inside backcover for fabrics.Stacking Frames — 20"W• For use with Concensys Reach “M” or “E”frames.• Includes attaching hardware.• Black only.• Uses top cap from base panel.2nd Option:Paint(if applicable):See inside frontcover for finishes.For Select Paint on “E”panels, add $24.PGSA SIN 711-1For specification details refer to:Working with Reach and Concensys,pages 230-238“P” or “W”NominalTop CapPanel HeightActual Height56" 53 5 ⁄8"–55 5 ⁄8"69" 66 5 ⁄8"–68 5 ⁄8"3rd Option:VeneerTop Cap Finish(if applicable):See inside frontcover for finishes.D Discontinued 12/31/2013Examples: 895620MP.P27 896920EP.CS918.P4JS Shippable by small-package carrier.282 | 895620W.CS928.P27.NE800 891320SF.CS928Systems Supplement – 3/2013

Reach ® — Concensys ®Metal Finished End Panel• Use at end of Reach storage run when wingpanels are not utilized. Finishes end of storageunit.• Adds 7 ⁄8" to storage run.How to specify —Select theModel Numberfrom above.FC1 P .1st Option:Paint:See inside frontcover for finishes.PExamples: FC1456P.P02In-Line Connector for Concensys• Allows an in-line connection of Reach storageand Concensys frame (adds 1 ⁄16" to run).• Requires In-Line Metal Finished End Panel(order separately). See #4 on page 235.• Use with painted or veneer top caps.In-Line Metal Finished End — Concensys• Use at end of Reach storage run when In-LineConnector is utilized. Finishes end of storageunit. See #3 on page 235.• Adds 7 ⁄8" to storage run.FC1056P.P4JMetal Ends and ConnectorsGSA SIN 711-1For specification details refer to:Working with Reach and Concensys,pages 230-238“P” or “W”NominalTop CapPanel HeightActual Height56" 53 5 ⁄8"–55 3 ⁄8"69" 66 5 ⁄8"–69 3 ⁄8"Ship Core Paint SelectDescription Model Weight Cubes List Price List PriceMetal Finished End for Concensys — Painted56"H FC1456P D 23 4.1 $ 222 $ 25869"H FC1469P D 25 5.0 $ 237 $ 273In-Line Connector for Concensys56"H FC1056P D 5 S 0.6 $ 175 $ 19369"H FC1069P D 6 S 0.8 $ 175 $ 193In-Line Metal Finished End for Concensys — Painted56"H FC1556P D 23 4.1 $ 222 $ 25869"H FC1569P D 25 5.0 $ 237 $ 273Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 283SD Discontinued 12/31/2013OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Concensys ®• Tackable Acoustic tiles (with factory installedattachment clips).• 36"W-48"W tiles to finish the back side ofConcensys storage units, except ported tilesdo not work with Integrated Wardrobe units.Reference footnotes on page 291.FC5636TFC6936THow to specify —Select theModel Numberfrom above.FC .Monolithic Tackable Acoustic TilesShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 636"W Monolithic Tackable Acoustic Tiles — Non-Ported56"H FC5636T D 5 3.3 $ 196 $ 229 $ 251 $ 314 $ 379 $ 45769"H FC6936T D 6 4.1 $ 264 $ 297 $ 319 $ 382 $ 447 $ 52542"W Monolithic Tackable Acoustic Tiles — Non-Ported56"H FC5642T D 6 3.8 $ 216 $ 243 $ 272 $ 343 $ 412 $ 49369"H FC6942T D 7 4.7 $ 290 $ 330 $ 365 $ 460 $ 552 $ 66548"W Monolithic Tackable Acoustic Tiles — Non-Ported56"H FC5648T D 6 4.3 $ 221 $ 248 $ 277 $ 348 $ 417 $ 49869"H FC6948T D 8 5.4 $ 298 $ 337 $ 371 $ 471 $ 567 $ 6851st Option:Fabric:See inside backcover for fabrics.Example: FC4336T.CS928GSA SIN 711-1For specification details refer to:Working with Reach and Concensys,pages 230-238D Discontinued 12/31/2013284 | Systems Supplement – 3/2013

Reach ® — Concensys ®• Tackable Acoustic tiles (with factory installedattachment clips).• 36"W-48"W tiles to finish the back side ofConcensys storage units, except ported tilesdo not work with Integrated Wardrobe units.Reference footnotes on page 291.Monolithic Tackable Acoustic TilesGSA SIN 711-1For specification details refer to:Working with Reach and Concensys,pages 230-238OVERHEADS & HUTCHESFC5636EFC6936EHow to specify —Select theModel Numberfrom above.FC .ShipList PriceDescription Model Weight Cubes Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 636"W Monolithic Tackable Acoustic Tiles — Ported56"H FC5636E D 5 3.3 $ 251 $ 284 $ 306 $ 369 $ 434 $ 51269"H FC6936E D 6 4.1 $ 313 $ 346 $ 368 $ 431 $ 496 $ 57442"W Monolithic Tackable Acoustic Tiles — Ported56"H FC5642E D 6 3.8 $ 282 $ 309 $ 338 $ 409 $ 478 $ 55969"H FC6942E D 7 4.7 $ 339 $ 379 $ 414 $ 509 $ 601 $ 71448"W Monolithic Tackable Acoustic Tiles — Ported56"H FC5648E D 6 4.3 $ 290 $ 317 $ 346 $ 417 $ 486 $ 56769"H FC6948E D 8 5.4 $ 349 $ 388 $ 422 $ 522 $ 618 $ 7361st Option:Fabric:See inside backcover for fabrics.Example: FC6936E.CS928.E42nd Option:ElectricalGrommet Color(Ported Tiles):See inside frontcover for finishes.ED Discontinued 12/31/2013Systems Supplement – 3/2013 allsteeloffice.com | 285REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Concensys ®NOTE: Reach storage units ship with eitherthin or thick tile attachment kits. Quantity andtype of kits included with each unit assumesadjacent unit is configured the same. If adjacentunit is different, a kit of the opposite thicknessmay need to be ordered separately for bestaesthetics.How to specify —Select theModel Numberfrom above.FTK .ShipDescription Model Weight Cubes List PriceExample: FTK136.P27Tile Attachment Kits• Thin Tile Attachment Kits cap off the uppermodule tile when adjacent to a flipper orhinged door module.• Thin Tile Attachment Kits are used in everylocation below top module of storage unit.• Thick Tile Attachment Kits cap off the uppermodule tile adjacent to a tambour door or anopen shelf.Tile Attachment KitsGSA SIN 711-1For specification details refer to:Working with Reach and Concensys,pages 230-238Tile Attachment Kits — Thin36"W FTK136 D1 0.1 $ 4242"W FTK142 D1 0.1 $ 4248"W FTK148 D1 0.1 $ 42NOTE: Used when top module is adjacent to flipper or hinged door module.Tile Attachment Kits — Thick36"W FTK236 D1 0.1 $ 4242"W FTK242 D1 0.1 $ 4248"W FTK248 D1 0.1 $ 42NOTE: Used when top module is adjacent to tambour or open module.1st Option:HorizontalPaint Color:See inside frontcover for finishes.PThin TileAttachment Kit —ships with storageunits specified witha flipper or hingeddoor module.Thick TileAttachment Kit —ships with storageunits specified withtambour door oropen module.D Discontinued 12/31/2013286 | Systems Supplement – 3/2013

TN41320T TN43020TA26A26 TN356EA26 TN05636A26 TN05636 TN313HA26 TN05636 T6BK AWST_36_TAN_AT_36_MANFT6936MMMBBAAMGA26 TN05636T6BK AWS A26 TN96936TA26 TN313HTN05636T_36_TAN_AT_36_MANFT6936MMMBBAAMGT6BK AWS A26 TN96936TA26 TN05636 TN313HT_36_TAN_AT_36_MANFT6936MMMBBAAMGT6BK AWSA26 TN313HTN96936T TN16920E871236 A26T6BK AWS T_36_TAN_AT_36_MANFT6936MMMBBAAMGA26 TN313HA26TN96936T TN16920M871236ET6BK AWS T_36_TAN_AT_36_MANFT6936MMMBBAAMGA26 TN313HA26TN96936T TN16920M871236ET6BK AWST_36_TAN_AT_36_MANFT6936MMMBBAAMGA26 TN05636 TN313H876072 A26TN05636 871236 A26873501 A26873504 A26A26 TN356EA26 TN356EA26 TN356E871236E A26AWS FP723624SA26 TN356LA26 TN05636A26 AWS TN05636 TN356L FP723624SA26 TN05636 T6BK AWSA26 TN05636 TN356L AWS FP723624SA26 TN05636 T6BK AWSA26 AWS TN05636 TN356L FP723624SA26 TN05636 T6BK AWSA26 873504A26 873501A26 873504A26 873501A26 873504A26 873501A26 873501A26 873504A26 871236EA26 TN356EA26 TN356EA26 TN356EA26 AWS TN356L FP723624SA26 TN05636A26 TN05636A26 873501A26 873504A26 TN05636 T6BK AWSA26 TN05636 T6BK AWSA26 871236EA26 AWS TN05636 TN356L FP723624SA26 TN05636A26TN96936T TN16920EA26 TN05636A26 TN356EA26 TN313HA26TN41320T TN43020TReach Typical 69"H 6-Station Cluster 6' x 7'GSA Reference PageOVERHEADS & HUTCHESN56/36N56/36N69/20N56/36N56/36N56/36N56/36N56/36N56/36N56/36N56/36N56/36N56/36N56/36TANMAN69x36 MMM BB ATANMAN69x36 MMM BB AN69/20TANMAN69x36 MMM BB ATANMAN69x36 MMM BB AN69/20TANMAN69x36 MMM BB ATANMAN69x36 MMM BB A69"H 6-Station Cluster 6' x 7' with Terrace 2.6Typical #REA-AG 03.13N69/20N56/36N56/36N56/36N56/36N56/36N56/36N56/36N56/36N56/36Line Product Model List ExtendedItem Description Qty Number Price Price1 69"H x 36"W Storage WallMetal/Metal/Metal/Box/Box/File/Lateral/Arch 6 FT6936MMMBBA $ 4,818 $28,90836"W Middle/Tambour Door Trans/Non-Ported/Locking .MANL36"W Top/Flipper Door/Non-Ported .TAN2 Reach Ter 2.6 End Panel Frame 69"H Painted Top Cap 2 TN16920E 484 9683 Reach Ter 2.6 Middle Panel Frame 69"H Painted Top Cap 2 TN16920M 484 9684 Base Panel Frame 56"H x 36"W 22 TN05636 387 8,5145 High-Low End Trim Kit 13"H 8 TN313H 88 7046 E End Trim Kit 56"H 8 TN356E 93 7447 L 90-Degree Connector Kit 56"H 6 TN356L 161 9668 Tackable Acoustical Tile 13"H x 20"W 6 TN41320T 77 4629 Tackable Acoustical Tile 13"H x 36"W 88 TN41336T 93 8,18410 Tackable Acoustical Tile 30"H x 20"W 2 TN43020T 108 21611 Tackable Acoustical Tile 30"H x 36"W 44 TN43036T 129 5,67612 Monolithic Tackable Acoustical Tile 69"H x 36"W 6 TN96936T 268 1,60813 Saddle Flat Edge 72"W x 36"D x 24"W Laminate w/Grommets 6 FP723624S 717 4,30214 Worksurface Bracket Kit 12 T6BK 40 48015 Power Harness 36"W 2 871236 198 39616 Power Harness, Extended for 36"W Level 5 871236E 219 1,09517 Ter 2.6/Align Duplex Receptacle Circuit 1 6 873501 36 21618 Ter 2.6/Align Duplex Receptacle Circuit 4 6 873504 36 21619 Base Infeed 1 876072 222 222TOTAL $64,845REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 287

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® —Electrical & DataReach features high capacity for cable management, includingelectrical, voice and data capabilities. The 8-wire electricalsystem can be integrated at base pathway and beltline. Theopen structure of the frame allows voice and data cables to berouted both vertically and horizon tally.Integrated Power Poleaccommodates power in-feedand communication datalines. (Terrace only.)Scoops forrouting ofcables arestandard onboth sides ofmiddle and topmodules.OptionalPower/Dataport can replacescoops whenadjacent to a20”W Reach“M” or “E”panel.(Electricalpower ONLY innon-lockingunit to complywith U.L.requirements.)Base pathway accommodatespower and lay-in capacity fordata and communication.Illustration above — Terrace 2.6Optional ported middle levels provideports on the back side to powercomponents inside the non-locking moduleand at beltline for the facing station.Working with Reach Electrical & DataReach extended power harnessesjump power up to the next level.Power and data in middle levelmust come up from the base ofeach individual storage unit.Integrated wardrobe middle levelunits port on inside only and usean extended power harness thatis 12" less than the width ofcabinet.GSA Reference PageDuplex receptacles snap into electrical powerharnesses or pass-thru harnesses. Use Terrace2.6 duplex receptacles for Reach Terrace 2.6or 3.4 and Reach Concensys storage units.Requires electrical mounting brackets andported tiles (ordered separately).Data faceplates can bemounted in vacantreceptacle openings.Electrical power harness accepts up to 2duplex receptacles at base pathway.Extended power harness can be used tozig-zag power in the base of a Reach storageunit run from one side to the other.Base pathway powerin-feed mounts intoany receptacleposition in the basepathway area and isconnected to thebuilding electricalsupply.288 | Systems Supplement – 3/2013

Reach ® — Electrical & DataWorking with Reach Electrical & DataGSA Reference PageOVERHEADS & HUTCHESIllustration above — Terrace 3.4Duplex receptacles snap into electrical power harnessesor pass-thru harnesses. Use Terrace 2.6 duplexreceptacles for Reach Terrace 2.6 or 3.4 and ReachConcensys storage units. Requires electrical mountingbrackets and ported tiles (ordered separately).Extended power harnesses can be usedto zig-zag power in the base of a Reachstorage unit from side-to-side.Terrace 3.4 concealed power/data, tile accessmechanisms, and hinge tiles are limited towing panels. They are not available withTerrace 3.4 tiles on Reach storage units.Terrace 3.4 wing panelsuse Terrace 3.4 duplexreceptacles.Electrical power harness acceptsup to 2 Terrace 2.6 duplexreceptacles at base pathway.Use Terrace 3.4 basepathway power in-feed intoany receptacle position in thebase pathway of Terrace 3.4wing panels.Terrace 3.4 featuresan exceptionally highcapacity for cablemanagement.REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 289

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Electrical & DataReach electrical offers achoice of two electricalsystems:• Four-circuit, 3 + 1• Four-circuit, 2 + 2Both systems utilize an8-wire electrical system, ratedat 20 amps per circuit(15 amps Canadian). Seepages 150-151 for a detailedexplanation of each electricalsystem.Reach storage units andelectrical components are U.L.Listed. Electrical componentsare also CSA certified.Installation and use of theelectrical system, the numberof recep tacles used on a givencircuit and connections to thebuilding power supply shouldbe in compliance with all localand national electrical codes.NOTE: All Reach moduleswith internal ported electricalreceptacles must be specifiedas non-locking units.Caution: Electricalequipment cords orextension cords MUST NOTBE ROUTED through cablescoops in frame sides.In-feedsPower in-feed cables deliverpower from building to system.In-feed cables are housed inconduit to separate electricalsystem from communicationsand data lines.Integrated power andcommu ni cations polesprovide capacity for routingpower supply directly throughthe top of any Terrace Reach“M” or “E” frame in place oftop cap. Power pole has acavity on each side of a centerseptum. When using a ceilingpower in-feed, consider thatthe in-feed must connect intoan electrical harness located inan adjacent panel or Reachstorage unit.Ceiling power in-feedconnects to a prewiredelectrical harness in the belt lineor base pathway, traversesthrough an adjacent panel andterminates in the junction boxat the top of the integratedpower pole. For use withintegrated power pole models874343 and 870469 withTerrace 2.6 or 870343 and870369 with Terrace 3.4 units.No portion of the flex cablecan be exposed afterinstallation.Sealtight base pathwaypower in-feed attaches to areceptacle opening at the basepathway. A heavy rubbersheathing shields conduit,allowing in-feed to beexposed.Working with Reach Electrical & DataHardwire (New York Code)junction box (model 871400)is used when local electricalcodes require hardwire entry.When used in 36"W storageunits, power can be routedonly in one direction. Whenused in 42" and 48"W storageunits, an electrical pass-thrucable or harness for that unit’swidth can be used to routepower back in the oppo sitedirection. Unit must connect toa power or pass-thru harnesspositioned in the base pathwayarea of an adjacent unit orpanel. Customer to furnish allcabling and wiring from powerentry to power source. Junctionbox can be positioned at anyduplex receptacle location.Hardwire (Chicago Code)Wiring harnesses and snapconnectors are not allowed inChicago — base pathwaysmust be comprised of allmetallic compo nents.Concealed mounting is theonly option at beltline. For thebase pathway, junction box(model 874500 or 873550)clips directly into recep taclelocations. Customer mustfurnish conduit, wiring,standard duplex receptacleswith metal covers for thebeltline and designer-typereceptacles for the basepathway. Power entry can berouted from the ceiling, via aTerrace power pole, or fromthe floor into a junction box(model 874500 or 873550).GSA Reference PagePowerPower blocks on electricalpower harness and pass-thruharness accept duplexreceptacles.Electrical power harnessesare used to distribute power instorage units with Reach,harnesses can be mounted atthe base pathway and atbeltline using mountingbrackets. All power har nesseshave power blocks to accepttwo duplex receptacles in thebase pathway, or four duplexreceptacles (two on each side ofstorage unit) when exposed atmiddle level of ported module.Connectors at both ends ofpower harnesses allow powerdistri bu tion in either direction.Extended power harnessesprovide additional length toallow zig-zag between frontand back of Reach unit or tojump from base to beltline.(See illustration on page 288.)Electrical pass-thruharnesses have capacity tohandle one duplex receptaclein the base pathway, or one oneach side of the storage unitwhen exposed at middle levelof a ported module.Electrical pass-thru cablesdistribute power through anystorage unit where receptaclesare not required. Cable lengthcannot be stretched.290 | Systems Supplement – 3/2013

Reach ® — Electrical & DataReceptaclesDuplex receptacles snap intopower blocks of powerharnesses or pass-throughharnesses. Use Terrace 2.6duplex receptacles for all Reachstorage units. Each receptacle islabeled to indicate which circuitit will be connected to.Power BlocksBase pathway mounting:Power blocks snap directlyonto brackets in base pathway.Beltline mounting: Forexposed receptacles in middleor top level, mount powerblocks onto ElectricalMounting Brackets whichWorking with Reach Electrical & Datascrew into the panel frame orsegment kit. (Mountingbrackets sold separately.)Data/Electrical Port Tiles andported storage modules mustbe used where exposedreceptacles will be located.SidePower/DataPort canreplacescoops leftor right sideof middle orGSA Reference Pagetop levels. Unit has tworeceptacles, plus two data ports.Power connects to utility ordata circuit in base power asspecified by model number.Recessed dimension requires an“E” or “M” panel frameadjacent to unit. Data terminalsmust be of a design that willsnap into .695 x .650, .590 x.790 or .590 x .750 openings in.064 maximum thick faceplate.Level Power Middle Level Maximum Unit Harness Model CommentsLocation Electrified? Number of Width(Yes/No) Outlets***BOTTOM Zig-Zag N/A 1 Duplex 36" 871160 24" greater than modular dim.(alternate 42" 871172 30" greater than modular dim.sides from 48" 871172 24" greater than modular dim.unit to unit; 2 Duplex 36" 871236Esee illus. 42" 871242Epage 592) 48" 871248ESame Side 1 Duplex 36" 871136(unit to unit) 42" 87114248" 8711482 Duplex 36" 87123642" 87124248" 871248MIDDLE Back Panel Yes 1 Duplex Inside and 36" 871136 + 871024(or Top at 1 Duplex Backside* 42" 871142 + 87102443"H) (facing station) 48" 871148 + 8710242 Duplex Inside and 36" 871236E2 Duplex Backside* 42" 871242E Except Integrated Wardrobe units(facing station) 48" 871248E Except Integrated Wardrobe units2 Duplex Inside and 42" 871230E Integrated Wardrobe — middle module 12" narrower0 Duplex Backside** 48" 871236E Integrated Wardrobe — middle module 12" narrowerSide Panel 2 Simplex 36" 879901E Except Integrated Wardrobe units42" or48" 8799004ESide Panels 2 Simplex 36" (Power and data(Reversed 42" grommet is circuitModule) 48" dependent.)Side Panel 1 Simplex 42" 879901E or Integrated Wardrobe — no port on wardrobe side(Integrated) 48" 8799004ETOP Side Panel Yes or No 2 Simplex 36" 879901E + 871024 Power and data grommet is circuit dependent42" or48" 879904E + 871024Side Panel Yes or No 2 Simplex 36"(Reversed 42"Module) 48"*Backside receptacles require ported tiles. Integrated wardrobe port limited to non-wardrobe side of unit (backside tile port is inaccessible on wardrobe side of unit).**Backside receptacles (exterior tiled side of cabinet) would require field cutting of off-module ports in standard tile to align with 12" narrower power harness.***Use Terrace 2.6 duplex receptacles for all Reach storage units.OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 291

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — Electrical & DataBase Pathway Receptacle LocationsLay-in Cable CapacityThe base pathway in Reachstorage units allowcontinuous voice and data linesto run through and betweenpanels without interruption.Lay-in is provided for environ -ments where systems furnitureor cabling are subject tofrequent change.Cabling can be ran up the sideof the unit to allow access tomiddle and top modules.Reach “E” End and “M”Middle frame.For panel routing refer toindividual systems cablecapacity pages:Terrace 2.6 —pages 147-148Terrace 3.4 —pages 147-148Concensys — see SystemsSpecification GuideCircuit UsageWorking with Reach Electrical & DataGSA Reference PageStrategy 1Circuits to Equipment — Assign specific uses for each of thecircuits:• For example, in a four-circuit system:Circuit 1 — Calculators, fans, etc.Circuit 2 — Task lights (could be wired to wall switch)Circuit 3 — CRT or flat screen monitorsCircuit 4 — CPUsStrategy 2Circuits to Workstations — Assign specific workstations to eachof the three available circuits. Use circuit 4 for power-sensitiveelectronic equipment.Extended powerharnesses provideadditional length to allowzig-zag between front andback of Reach unit.Top Views of ReachWing panels can bepowered from extendedharnesses using standardharnesses or pass-thruharnesses.Additional length ofextended power harnesscan be used to jump frombase to beltline — see matrixpage 291.292 | Systems Supplement – 3/2013

Reach ® — Electrical & DataSide Power/Data Port• Fits in place of side scoops in middle or toplevel modules of Reach.• Must have “M” or “E” frame adjacent toReach unit.• Includes power cable which runs from beltlineto base pathway and connects to 8-wireharness. Run from 69"H top module to baserequires additional 24" pass-thru cable(ordered separately).• Many of the AMP, AT&T, Krone, Leviton,and other commercially available dataterminals can be used — terminals must beof a design that will snap into .695 x .650,.590 x .790, or .590 x .750 openings, in.064 max. thick faceplates.How to specify —Select theModel Numberfrom above.ShipListDescription Model Weight Cubes PriceSide Power/Data PortE 2 simplex receptacles and 2 data positions (Circuit 1) 879901E 2 S 0.5 $ 2692 simplex receptacles and 2 data positions (Circuit 4) 879904E 2 S 0.5 $ 269USB Jack and CablesFUSBJ 1 S 0.1 $ 133Extended Power Harnesses — Reach SystemFor 30"W Module on 42"W Integrated Wardrobe Unit 871230E 3.0 S 0.5 $ 214For 36"W Module 871236E 3.0 S 0.5 $ 219For 42"W Module 871242E 3.0 S 0.5 $ 225For 48"W Module 871248E 4.0 S 0.5 $ 234NOTE: Use Terrace 2.6 Duplex Receptacles on all Reach units — see page 156.Electrical Mounting Brackets (for use with ported modules)(Pack of 12) — for Reach storage only 878012 1 S 0.6 $ 156NOTE: One bracket required at beltline for each pass-thru harness and 2 for power harness.Hardwire (Chicago Code) — Black onlyJunction Box (Pack of 6) —Base Pathway or Port level 873500 D D4.5 S 0.1 D DUniversal Junction Box (Pack of 6) 873550 5.6 S 0.1 $ 557Beltline Filler Kit forUniversal Junction Box (Pack of 6) 8988BLF 1.2 S 0.1 $ 214E Available in Express Solutions.1st Option:Color(if applicable):P BlackP• 2 simplex receptacles and 2 data positions.• Includes adapters to allow use ofcommercially available data terminals orblanks to fill unused openings.• Flint with black receptacles only.USB Jack• Includes jack and 2 cables.• 12' cable connects CPU and Jack; 3' cableconnects jack and device (printer, etc.) locatedin Reach module.Extended Power Harness• Provide additional length to allow zig-zagbetween front and back of Reach unit.• Can be used to jump power up from base tobeltline.Electrical Components — ReachFor specification details refer to:Working with Electrical, pages 288-292GSA SIN 711-1• Standard Terrace single block electricalharnesses 8711XX cannot be used to jumpfrom baseline to beltline in Reach.NOTE: Electrical harnesses, cables, receptacles,in-feeds, power poles, trim kits, and dataaccessories are located on:Terrace — pages 154-162Concensys — see Systems Specification GuideUse Terrace 2.6 Duplex Receptacles on allReach units — see page 156.D D Discontinued 7/4/2010Examples: 879901E.P FUSBJ.X 871230E.P 878012 S Shippable by small-package carrier.Systems Supplement – 3/2013 873500.Pallsteeloffice.com | 293OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — WorksurfacesReach offers some unique worksurface shapes that have beendesigned to make the most of the space you have available.Working with Worksurfaces and SupportsWorksurfaces are 1 1 ⁄4" thick with particle board core and with top surfaces finished in high-pressure laminate. Bottom surfaces arecovered with a backer sheet. Worksurface are available in various shapes and sizes to fit individual needs and to be aestheticallyappealing. Reach worksurfaces are universal and can be used for either Terrace or Concensys applications. 66" and 72" wideworksurfaces include a rear center support bracket. 78" and 84" wide worksurfaces require a 24"D cantilever bracket at center(ordered separately). A rear support bracket is also shipped with rudder cove worksurfaces for use in the corner. All other supporthardware must be ordered separately. Careful consideration should be taken when specifying Reach surfaces. Refer to specificationpages for specific worksurface dimensions to achieve accurate worksurface shape.Single SurfacesSaddle is a rectangular worksurface witha cockpit cutout allowing the user toposition their computer left, center, orright. Imagine, you can actually face theaisle in a 6' x 6' workstation. Symmetricalnon-handed shape for ease of inventorymanagement.66" and 72"W Saddles come with acenter support bracket; 78" and 84"WSaddles require a 24"D cantilever bracketfor center support (ordered separately).Cantilever brackets are alsorecommended for end supports of42"D and 48"D worksurfaces asshown above.Rudder worksurfaces transition from thewidth of the storage unit at one end, withdepths of 36", 42", or 48"D; to thewidth of a return panel or a joiningworksurface at the other end, with depthsof 24" or 30"D.66" and 72"W Rudders come with acenter support bracket; 78" and 84"WRudders require a 24"D cantileverbracket for center support (orderedseparately).Cantilever brackets are alsorecommended for end supports of42"D and 48"D worksurfaces asshown above.GSA Reference PageCombination worksurfaces are simplythe combination of a rudder and a cornerworksurface into a single surface. Theyare left and right-handed, and work wellto create a team environment.72"W Combination worksurfaces comewith a center support bracket. The 20"worksurface end requires the support ofan 18"D handed cantilever (orderedseparately). 78" and 84"W Combinationsrequire a 24"D cantilever bracket forboth center and end support (orderedseparately).Cantilever brackets are alsorecommended for end supports of42"D and 48"D worksurfaces asshown above.294 | Systems Supplement – 3/2013

Reach ® — WorksurfacesDual SurfacesWorking with Worksurfaces and SupportsGSA Reference PageAdditional SurfacesOVERHEADS & HUTCHESJetty worksurfaces are designed to workin combination with short rudderworksurfaces to provide a conferencingapplication. Jetty worksurfaces requirethe use of a column for support.Cantilever brackets are alsorecommended for end supports of42"D and 48"D worksurfaces asshown above.Storage Unit TopsReach Storage Unit Tops arerectangular worksurfaces installed on topof 43"H storage units so they can be usedas counters. Worksurfaces can span thewidth across the top of two Reach storageunits of same or different width.Rudder Cove worksurfaces are handedand designed to work in combinationwith short rudder worksurfaces toprovide an “L” configuration.Worksurface comes with corner supportbracket.Each end of the rudder cove worksurfacerequires the use of the appropriate depthcantilever for support (orderedseparately).Cantilever brackets are alsorecommended for end supports of42"D and 48"D worksurfaces asshown above.Secondary is a stand alone handedworksurface that matches the panelwidth. The depth varies from 24" or30"D at one end to 20"D at the other.Worksurface comes with a secondarycorner bracket. Additional supportsrequired include worksurface supportbrackets and 24"D and 18"D cantileverbrackets (ordered separately).REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 295

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — WorksurfacesFlat Edge and Wave-Shaped Edgetrim worksurfaces are available onlaminate tops in eight standard colors(customer specified) to match solidlaminates and to complement pattered orwoodgrain laminates. Veneerworksurfaces have veneer wrapped edges.If selected, Waved Edge trim comes onthe user side of the worksurface withFlat Edge trim on the straight sides andT-mold being utilized on the curved sides.SupportsWorksurfaces can beconfigured at standard 29 1 ⁄2"height, or at various heightson 1" increments.Worksurface supportoptions include:• Worksurface bracket kits• Cantilever brackets• Support columns• Flat bracketsWorksurface bracket kitsallow one end of aworksurface to be supportedby a Reach storage unit andthe other by a return panel.The storage unit and returnpanel width must be the sameas the corresponding depths ofthe worksurface.NOTE: Worksurface bracketkits ARE system specific toTerrace or Concensys.Flat Edge ProfileWave-Shaped Edge ProfileVeneer Edge ProfileCantilever brackets aresystem specific and left orright handed. They can beinserted into panel reveals in1" increments. One size isused for both 24" and 30"Dworksurfaces. Reach 18"DCantilever brackets can beused to support 18"-20" deepworksurfaces. 18" deepcantilever brackets can also beused at the end of a 20" deepcombination or secondaryworksurface.Important: Do not use24-30" cantilever brackets atthe end of a worksurfacewhere no 90° return panel orReach storage unit ispositioned.Working with Worksurfaces and SupportsCantilever brackets can beused to support worksurfaceswith a depth that is less thanthe width of the Reach storageunit when a wing panel is at90° to the storage unit.Jetty worksurfaces requirethe specification of supportcolumns. Support columns aresystem specific for Terrace orConcensys and must beordered separately.GSA Reference PageWire management grommets arestandard in worksurfaces and arespecified in oval plastic, or metal — ovalor square. Worksurfaces can be specifiedwith no grommets. Most Reach laminateworksurfaces can be specified withscalloped rear edge eliminating the needfor grommets.Flat brackets can be used toconnect one surfaceperpendicular to anotherworksurface.296 | Systems Supplement – 3/2013

Reach ® — WorksurfacesLaminate with Flat or Wave-Shaped Edge and Veneer WorksurfacesGSA Reference PageOVERHEADS & HUTCHESRudderSaddleCombinationRudder CoveJettySecondaryShaded edge indicates location of wave edge (optional), other edgesare flat to provide smooth transition between worksurfaces.Reach worksurfaces work with either Terrace or Concensys. Standard Concensys Flat Edge and Terrace worksurfaces can be usedwith Reach worksurfaces.REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 297

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — WorksurfacesD1D1WWD2With GrommetsD1WWith ScallopsNo GrommetsD2D2How to specify —Select theModel Numberfrom above.D1D1D1PrefixFP Laminate w/FlatFW Laminate w/WaveFV Veneer DSaddle WorksurfacesSaddle WorksurfaceGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneerw/Flat Edge or Veneer “V” D Ship w/Flat w/Wave V1Description Model Model Weight Cubes List Price List Price List Price60"W x 36"D (1) x 24"D (2) FP603624S FW603624S 71 5.6 $ 643 $ 69266"W x 36"D (1) x 24"D (2) FP663624S FW663624S 77 6.1 $ 678 $ 72672"W x 36"D (1) x 24"D (2) FP723624S FW723624S 83 6.7 $ 717 $ 76560"W x 36"D (1) x 30"D (2) FP603630S FW603630S 73 5.6 $ 643 $ 69266"W x 36"D (1) x 30"D (2) FP663630S FW663630S 79 6.1 $ 678 $ 72672"W x 36"D (1) x 30"D (2) FP723630S FW723630S 85 6.7 $ 717 $ 76578"W x 36"D (1) x 30"D (2) FP783630S FW783630S 90 7.3 $ 885 $ 93684"W x 36"D (1) x 30"D (2) FP843630S FW843630S 96 7.8 $ 954 $100260"W x 42"D (1) x 30"D (2) FP604230S FW604230S 81 6.5 $ 701 $ 74966"W x 42"D (1) x 30"D (2) FP664230S FW664230S 89 7.2 $ 725 $ 77372"W x 42"D (1) x 30"D (2) FP724230S FW724230S 96 7.8 $ 750 $ 79878"W x 42"D (1) x 30"D (2) FP784230S FW784230S 103 8.5 $ 936 $ 98484"W x 42"D (1) x 30"D (2) FP844230S FW844230S 111 9.1 $1028 $107772"W x 48"D (1) x 30"D (2) FP724830S FW724830S 109 8.9 $ 789 $ 83978"W x 48"D (1) x 30"D (2) FP784830S FW784830S 117 9.7 $ 971 $101984"W x 48"D (1) x 30"D (2) FP844830S FW844830S 125 10.4 $1072 $1119NOTES:F .1) Add Suffix “S” for Scallop wire management detail available on Flat and Wave Edge worksurfaces only.No upcharge. Example: FP603624SS2) Add Suffix “N” to model number for no grommets, no upcharge.Example: FP603624SN1st Option:Laminate orVeneer Finish:See insidefront coverfor finishes.E .Example: FP603624SN.TM32.EY.2nd Option:Edge TrimColor(Laminate only):See insidefront coverfor finishes.3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on veneer; add$10 per grommet for laminate)S Square Metal (no upcharge on veneer;add $10 per grommet for laminate)D D Discontinued 8/29/20104th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte Silver298 | Systems Supplement – 3/2013ED DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D

Reach ® — WorksurfacesAWith GrommetsAWith ScallopsABBBDDDNo GrommetsAWith GrommetsAWith ScallopsABBBDDDEEENo GrommetsHow to specify —Select theModel Numberfrom above.CCCCCCPrefixFP Laminate w/FlatFW Laminate w/WaveFV Veneer DEEECombination Worksurfaces — Extended LeftCombination WorksurfaceGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneerw/Flat Edge or Veneer “V” D Ship w/Flat w/Wave V1Description Model Model Weight Cubes List Price List Price List Price48"A x 72"B x 36"C-24"D FP48723624C FW48723624C 93 8.9 $ 789 $ 83948"A x 78"B x 36"C-24"D FP48783624C FW48783624C 100 9.7 $ 975 $102348"A x 84"B x 36"C-24"D FP48843624C FW48843624C 107 10.4 $1073 $112048"A x 72"B x 36"C-30"D FP48723630C FW48723630C 95 8.9 $ 789 $ 83948"A x 78"B x 36"C-30"D FP48783630C FW48783630C 102 9.7 $ 975 $102348"A x 84"B x 36"C-30"D FP48843630C FW48843630C 110 10.4 $1073 $112048"A x 72"B x 42"C-24"D FP48724224C FW48724224C 98 8.9 $ 789 $ 83948"A x 78"B x 42"C-24"D FP48784224C FW48784224C 105 9.7 $ 975 $102348"A x 84"B x 42"C-24"D FP48844224C FW48844224C 113 10.4 $1073 $112048"A x 72"B x 42"C-30"D FP48724230C FW48724230C 100 8.9 $ 789 $ 83948"A x 78"B x 42"C-30"D FP48784230C FW48784230C 107 9.7 $ 975 $102348"A x 84"B x 42"C-30"D FP48844230C FW48844230C 115 10.4 $1073 $1120NOTE: E dimension is 20" on 72"W, 24" on 78" and 84"W.Combination Worksurfaces — Extended Right36"A x 72"B x 48"C-24"D FP36724824C FW36724824C 93 8.9 $ 789 $ 83936"A x 78"B x 48"C-24"D FP36784824C FW36784824C 100 9.7 $ 975 $102336"A x 84"B x 48"C-24"D FP36844824C FW36844824C 107 10.4 $1073 $112036"A x 72"B x 48"C-30"D FP36724830C FW36724830C 95 8.9 $ 789 $ 83936"A x 78"B x 48"C-30"D FP36784830C FW36784830C 102 9.7 $ 975 $102336"A x 84"B x 48"C-30"D FP36844830C FW36844830C 110 10.4 $1073 $112042"A x 72"B x 48"C-24"D FP42724824C FW42724824C 98 8.9 $ 789 $ 83942"A x 78"B x 48"C-24"D FP42784824C FW42784824C 105 9.7 $ 975 $102342"A x 84"B x 48"C-24"D FP42844824C FW42844824C 113 10.4 $1073 $112042"A x 72"B x 48"C-30"D FP42724830C FW42724830C 100 8.9 $ 789 $ 83942"A x 78"B x 48"C-30"D FP42784830C FW42784830C 107 9.7 $ 975 $102342"A x 84"B x 48"C-30"D FP42844830C FW42844830C 115 10.4 $1073 $1120NOTE: E dimension is 20" on 72"W, 24" on 78" and 84"W.NOTES:F C .1) Add Suffix “S” for Scallop wire management detail available on Flat and Wave Edge worksurfaces only.No upcharge. Example: FP36724824CS2) Add Suffix “N” to model number for no grommets, no upcharge.Example: FP36724824CND D Discontinued 8/29/20101st Option:Laminate orVeneer Finish:See insidefront coverfor finishes.Example: FP48723624C.TM33.EU.P.2nd Option:Edge TrimColor(Laminate only):See insidefront coverfor finishes.E .3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Mapleor E4 on ALL Cherry veneers)M Oval Metal (no upcharge on veneer;add $10 per grommet for laminate)S Square Metal (no upcharge onveneer; add $10 per grommet forlaminate)4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneeronly)EL Matte SilverSquare:EL Matte SilverSystems Supplement – 3/2013 allsteeloffice.com | 299D DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DOVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — WorksurfacesD1D1WWith GrommetsD1WWith ScallopsWNo GrommetsHow to specify —Select theModel Numberfrom above.D2D2D2PrefixFP Laminate w/FlatFW Laminate w/WaveFV Veneer DRudder WorksurfaceRudder WorksurfaceGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneerw/Flat Edge or Veneer “V” D Ship w/Flat w/Wave V1Description Model Model Weight Cubes List Price List Price List Price36"W x 36"D (1) x 24"D (2) FP363624U FW363624U 46 S 3.4 $ 494 $ 54342"W x 36"D (1) x 24"D (2) FP423624U FW423624U 52 S 3.9 $ 541 $ 59148"W x 36"D (1) x 24"D (2) FP483624U FW483624U 58 4.5 $ 589 $ 63760"W x 36"D (1) x 24"D (2) FP603624U FW603624U 71 5.6 $ 597 $ 64466"W x 36"D (1) x 24"D (2) FP663624U FW663624U 77 6.1 $ 616 $ 66672"W x 36"D (1) x 24"D (2) FP723624U FW723624U 83 6.7 $ 629 $ 67536"W x 36"D (1) x 30"D (2) FP363630U FW363630U 48 S 3.4 $ 494 $ 54342"W x 36"D (1) x 30"D (2) FP423630U FW423630U 54 S 3.9 $ 541 $ 59148"W x 36"D (1) x 30"D (2) FP483630U FW483630U 60 4.5 $ 589 $ 63760"W x 36"D (1) x 30"D (2) FP603630U FW603630U 73 5.6 $ 597 $ 64466"W x 36"D (1) x 30"D (2) FP663630U FW663630U 79 6.1 $ 616 $ 66672"W x 36"D (1) x 30"D (2) FP723630U FW723630U 85 6.7 $ 629 $ 67536"W x 42"D (1) x 24"D (2) FP364224U FW364224U 52 S 3.9 $ 580 $ 63042"W x 42"D (1) x 24"D (2) FP424224U FW424224U 59 4.6 $ 604 $ 65248"W x 42"D (1) x 24"D (2) FP484224U FW484224U 67 5.2 $ 668 $ 71660"W x 42"D (1) x 24"D (2) FP604224U FW604224U 81 6.5 $ 715 $ 76366"W x 42"D (1) x 24"D (2) FP664224U FW664224U 89 7.2 $ 735 $ 78472"W x 42"D (1) x 24"D (2) FP724224U FW724224U 96 7.8 $ 745 $ 79336"W x 42"D (1) x 30"D (2) FP364230U FW364230U 54 S 3.9 $ 580 $ 63042"W x 42"D (1) x 30"D (2) FP424230U FW424230U 61 4.6 $ 604 $ 65248"W x 42"D (1) x 30"D (2) FP484230U FW484230U 69 5.2 $ 668 $ 71660"W x 42"D (1) x 30"D (2) FP604230U FW604230U 83 6.5 $ 715 $ 76366"W x 42"D (1) x 30"D (2) FP664230U FW664230U 91 7.2 $ 735 $ 78472"W x 42"D (1) x 30"D (2) FP724230U FW724230U 98 7.8 $ 745 $ 79378"W x 42"D (1) x 30"D (2) FP784230U FW784230U 103 8.5 $ 829 $ 87784"W x 42"D (1) x 30"D (2) FP844230U FW844230U 111 9.1 $ 908 $ 95636"W x 48"D (1) x 30"D (2) FP364830U FW364830U 58 4.5 $ 617 $ 66742"W x 48"D (1) x 30"D (2) FP424830U FW424830U 67 5.2 $ 670 $ 71948"W x 48"D (1) x 30"D (2) FP484830U FW484830U 75 6.0 $ 715 $ 763NOTES:F U .1) Add suffix “S” for Scallop wire management detail available on FlatStandardCrossGrain Direction Grain Directionand Wave Edge worksurfaces only. No upcharge. Example: FP363624US2) Add suffix “N” to model number for no grommets, no upcharge.Example: FP363624UN3) Add suffix “CG” to model number for Cross Grain direction of woodgrain laminates on Flat EdgeRudder worksurfaces 48"W or smaller. Example: FP363624UCGN1st Option:Laminate orVeneer Finish:See insidefront coverfor finishes.Examples: FP363624U.TM33.EU.P.2nd Option:Edge TrimColor(Laminate only):See insidefront coverfor finishes.E .3rd Option:Grommet Type:FW604224US.LT3B.EVD D Discontinued 8/29/2010P Oval Plastic (will match edge trimon laminate; will be E2 on ALLMaple or E4 on ALL Cherryveneers)M Oval Metal (no upcharge on veneer;add $10 per grommet for laminate)S Square Metal (no upcharge onveneer; add $10 per grommet forlaminate)4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneeronly)EL Matte SilverSquare:EL Matte SilverShippable by small-package carrier.300 | Systems Supplement – 3/2013SDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

Reach ® — WorksurfacesD1D1D1WWith GrommetsWWith ScallopsWNo GrommetsHow to specify —Select theModel Numberfrom above.D2D2D2PrefixFP Laminate w/FlatFW Laminate w/WaveFV Veneer DRudder WorksurfacesRudder WorksurfaceGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneerw/Flat Edge or Veneer “V” D Ship w/Flat w/Wave V1Description Model Model Weight Cubes List Price List Price List Price36"W x 24"D (1) x 36"D (2) FP362436U FW362436U 46 S 3.4 $ 494 $ 54342"W x 24"D (1) x 36"D (2) FP422436U FW422436U 52 S 3.9 $ 541 $ 59148"W x 24"D (1) x 36"D (2) FP482436U FW482436U 58 4.5 $ 589 $ 63760"W x 24"D (1) x 36"D (2) FP602436U FW602436U 71 5.6 $ 597 $ 64466"W x 24"D (1) x 36"D (2) FP662436U FW662436U 77 6.1 $ 616 $ 66672"W x 24"D (1) x 36"D (2) FP722436U FW722436U 83 6.7 $ 629 $ 67536"W x 30"D (1) x 36"D (2) FP363036U FW363036U 48 S 3.4 $ 494 $ 54342"W x 30"D (1) x 36"D (2) FP423036U FW423036U 54 S 3.9 $ 541 $ 59148"W x 30"D (1) x 36"D (2) FP483036U FW483036U 60 4.5 $ 589 $ 63760"W x 30"D (1) x 36"D (2) FP603036U FW603036U 73 5.6 $ 597 $ 64466"W x 30"D (1) x 36"D (2) FP663036U FW663036U 79 6.1 $ 616 $ 66672"W x 30"D (1) x 36"D (2) FP723036U FW723036U 85 6.7 $ 629 $ 67536"W x 24"D (1) x 42"D (2) FP362442U FW362442U 52 S 3.9 $ 580 $ 63042"W x 24"D (1) x 42"D (2) FP422442U FW422442U 59 4.6 $ 604 $ 65248"W x 24"D (1) x 42"D (2) FP482442U FW482442U 67 5.2 $ 668 $ 71660"W x 24"D (1) x 42"D (2) FP602442U FW602442U 81 6.5 $ 715 $ 76366"W x 24"D (1) x 42"D (2) FP662442U FW662442U 89 7.2 $ 735 $ 78472"W x 24"D (1) x 42"D (2) FP722442U FW722442U 96 7.8 $ 745 $ 79336"W x 30"D (1) x 42"D (2) FP363042U FW363042U 54 S 3.9 $ 580 $ 63042"W x 30"D (1) x 42"D (2) FP423042U FW423042U 61 4.6 $ 604 $ 65248"W x 30"D (1) x 42"D (2) FP483042U FW483042U 69 5.2 $ 668 $ 71660"W x 30"D (1) x 42"D (2) FP603042U FW603042U 83 6.5 $ 715 $ 76366"W x 30"D (1) x 42"D (2) FP663042U FW663042U 91 7.2 $ 735 $ 78472"W x 30"D (1) x 42"D (2) FP723042U FW723042U 98 7.8 $ 745 $ 79378"W x 30"D (1) x 42"D (2) FP783042U FW783042U 103 8.5 $ 829 $ 87784"W x 30"D (1) x 42"D (2) FP843042U FW843042U 111 9.1 $ 908 $ 95636"W x 30"D (1) x 48"D (2) FP363048U FW363048U 58 4.5 $ 617 $ 66742"W x 30"D (1) x 48"D (2) FP423048U FW423048U 67 5.2 $ 670 $ 71948"W x 30"D (1) x 48"D (2) FP483048U FW483048U 75 6.0 $ 715 $ 763NOTES:F U .1) Add suffix “S” for Scallop wire management detail available on FlatStandardCrossGrain Direction Grain Directionand Wave Edge worksurfaces only. No upcharge. Example: FP364224US2) Add Suffix “N” to model number for no grommets, no upcharge.Example: FP364224UN3) Add suffix “CG” to model number for Cross Grain direction of woodgrain laminates on Flat EdgeRudder worksurfaces 48"W or smaller. Example: FP364224UCGN1st Option:Laminate orVeneer Finish:See insidefront coverfor finishes.Example: FV363048U.CE800.MEL.2nd Option:Edge TrimColor(Laminate only):See insidefront coverfor finishes.E .3rd Option:Grommet Type:D D Discontinued 8/29/2010P Oval Plastic (will match edge trimon laminate; will be E2 on ALLMaple or E4 on ALL Cherryveneers)M Oval Metal (no upcharge on veneer;add $10 per grommet for laminate)S Square Metal (no upcharge onveneer; add $10 per grommet forlaminate)4th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze(veneer only)EL Matte SilverSquare:EL Matte SilverShippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 301SDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDOVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — WorksurfacesLWith GrommetsLWith ScallopsLNo GrommetsWith GrommetsWith ScallopsNo GrommetsHow to specify —Select theModel Numberfrom above.PrefixFP Laminate w/FlatFW Laminate w/Wave DFV Veneer DLLLRRRRRRRudder Cove Worksurfaces — Extended Left60" x 36"-20"L/24"R FP60362024EL F b 60362024EL D D 54 5.8 $ 58560" x 36"-20"L/30"R FP60362030EL F b 60362030EL D D 60 5.8 $ 58560" x 36"-24"L/24"R FP60362424EL F b 60362424EL D D 54 5.8 $ 58560" x 36"-24"L/30"R FP60362430EL F b 60362430EL D D 60 5.8 $ 58560" x 42"-20"L/24"R FP60422024EL F b 60422024EL D D 71 6.0 $ 66160" x 42"-20"L/30"R FP60422030EL F b 60422030EL D D 76 6.0 $ 66160" x 42"-24"L/24"R FP60422424EL F b 60422424EL D D 71 6.0 $ 66160" x 42"-24"L/30"R FP60422430EL F b 60422430EL D D 76 6.0 $ 66160" x 48"-20"L/24"R FP60482024EL F b 60482024EL D D 75 6.2 $ 68860" x 48"-20"L/30"R FP60482030EL F b 60482030EL D D 82 6.2 $ 68860" x 48"-24"L/24"R FP60482424EL F b 60482424EL D D 75 6.2 $ 68860" x 48"-24"L/30"R FP60482430EL F b 60482430EL D D 82 6.2 $ 688Rudder Cove Worksurfaces — Extended Right36" x 60"-24"L/20"R FP36602420ER F b 36602420ER D D 54 5.8 $ 58536" x 60"-30"L/20"R FP36603020ER F b 36603020ER D D 60 5.8 $ 58536" x 60"-24"L/24"R FP36602424ER F b 36602424ER D D 54 5.8 $ 58536" x 60"-30"L/24"R FP36603024ER F b 36603024ER D D 60 5.8 $ 58542" x 60"-24"L/20"R FP42602420ER F b 42602420ER D D 71 6.0 $ 66142" x 60"-30"L/20"R FP42603020ER F b 42603020ER D D 76 6.0 $ 66142" x 60"-24"L/24"R FP42602424ER F b 42602424ER D D 71 6.0 $ 66142" x 60"-30"L/24"R FP42603024ER F b 42603024ER D D 76 6.0 $ 66148" x 60"-24"L/20"R FP48602420ER F b 48602420ER D D 75 6.2 $ 68848" x 60"-30"L/20"R FP48603020ER F b 48603020ER D D 82 6.2 $ 68848" x 60"-24"L/24"R FP48602424ER F b 48602424ER D D 75 6.2 $ 68848" x 60"-30"L/24"R FP48603024ER F b 48603024ER D D 82 6.2 $ 688NOTES:F E .Rudder Cove WorksurfaceGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1Description Model Model Weight Cubes List Price List Price List PriceExample: FW60362024EL.TM33.EU.P1) Add Suffix “S” for Scallop wire management detail available on Flat Edge worksurfacesonly.No upcharge. Example: FP60422024ELS2) Add Suffix “N” to model number for no grommets, no upcharge. Example:FP60422024ELN1st Option:Laminate orVeneer Finish:See insidefront coverfor finishes..2nd Option:Edge TrimColor(Laminate only):See insidefront coverfor finishes.E .D D Discontinued 8/29/20103rd Option:Grommet Type:P Oval Plastic (will match edgetrim on laminate; will be E2 onALL Maple or E4 on ALLCherry veneers)M Oval Metal (no upcharge onveneer; add $10 per grommetfor laminate)S Square Metal (no upcharge onveneer; add $10 per grommetfor laminate)4th Option:Grommet Color(Metal only):Oval:E4 Black(veneer only)EZ Bronze(veneer only)EL Matte SilverSquare:EL Matte Silver302 | Systems Supplement – 3/2013DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

Reach ® — WorksurfacesJetty WorksurfaceGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneerw/Flat Edge or Veneer “V” D Ship w/Flat w/Wave V1Description Model Model Weight Cubes List Price List Price List PriceAJetty Worksurfaces — Left HandB36"A x 60"B x 30"C x 26"D FP366030JL FW366030JL 71 5.6 $ 801 $ 848 D DC36"A x 72"B x 30"C x 27"D FP367230JL FW367230JL 83 6.7 $ 867 $ 914 D DDWith Grommets42"A x 60"B x 30"C x 32"D FP426030JL FW426030JL 73 5.6 $ 864 $ 911 D DA42"A x 72"B x 30"C x 33"DBFP427230JL FW427230JL 85 6.7 $ 913 $ 961 D DOVERHEADS & HUTCHESCWith ScallopsCANo GrommetsAABWith GrommetsBWith ScallopsABNo GrommetsCCCSelect theModel Numberfrom above.DDDPrefixFP Laminate w/FlatFW Laminate w/WaveFV Veneer DBHow to specify —Jetty Worksurfaces — Right Hand36"A x 60"B x 30"C x 26"D FP366030JR FW366030JR 71 5.6 $ 801 $ 84836"A x 72"B x 30"C x 27"D FP367230JR FW367230JR 83 6.7 $ 867 $ 91442"A x 60"B x 30"C x 32"D FP426030JR FW426030JR 73 5.6 $ 864 $ 91142"A x 72"B x 30"C x 33"D FP427230JR FW427230JR 85 6.7 $ 913 $ 961NOTES:F J .DD1) Add Suffix “S” for Scallop wire management detail available on Flat Edge worksurfaces only.No upcharge. Example: FP366030JLS2) Add Suffix “N” to model number for no grommets, no upcharge. Example: FP366030JLN1st Option:Laminate orVeneer Finish:See insidefront coverfor finishes.E .Example: FP426030JRN.LT6A.EU.P.2nd Option:Edge TrimColor(Laminate only):See insidefront coverfor finishes.3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Mapleor E4 on ALL Cherry veneers)M Oval Metal (no upcharge on veneer;add $10 per grommet for laminate)S Square Metal (no upcharge onveneer; add $10 per grommet forlaminate)D D Discontinued 8/29/20104th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverSystems Supplement – 3/2013 allsteeloffice.com | 303DDDDDDDDREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — WorksurfacesDDWWith GrommetsWWith ScallopsWNo GrommetsWWith GrommetsWWith ScallopsDWNo GrommetsHow to specify —Select theModel Numberfrom above.DDPrefixFP Laminate w/FlatFW Laminate w/WaveFV VeneerSecondary Worksurfaces — Left HandSecondary WorksurfaceGSA SIN 711-1Laminate Wave Edge “W” Laminate Laminate Veneerw/Flat Edge or Veneer “V” Ship w/Flat w/Wave V1Description Model Model Weight Cubes List Price List Price List Price30"W x 24"D FP3024SL F b 3024SL 26 S 1.7 $ 356 $ 380 $ 98536"W x 24"D FP3624SL F b 3624SL 32 S 1.9 $ 371 $ 396 $101942"W x 24"D FP4224SL F b 4224SL 44 S 2.2 $ 385 $ 408 $105248"W x 24"D FP4824SL F b 4824SL 46 S 2.5 $ 395 $ 419 $109930"W x 30"D FP3030SL F b 3030SL D D 39 S 2.4 $ 39636"W x 30"D FP3630SL F b 3630SL D D 45 S 2.8 $ 41042"W x 30"D FP4230SL F b 4230SL D D 47 S 3.2 $ 42148"W x 30"D FP4830SL F b 4830SL D D 52 S 3.6 $ 433Secondary Worksurfaces — Right Hand30"W x 24"D FP3024SR F b 3024SR 26 S 1.7 $ 356 $ 380 $ 98536"W x 24"D FP3624SR F b 3624SR 32 S 1.9 $ 371 $ 396 $101942"W x 24"D FP4224SR F b 4224SR 44 S 2.2 $ 385 $ 408 $105248"W x 24"D FP4824SR F b 4824SR 46 S 2.5 $ 395 $ 419 $109930"W x 30"D FP3030SR F b 3030SR D D 39 S 2.4 $ 39636"W x 30"D FP3630SR F b 3630SR D D 45 S 2.8 $ 41042"W x 30"D FP4230SR F b 4230SR D D 47 S 3.2 $ 42148"W x 30"D FP4830SR F b 4830SR D D 52 S 3.6 $ 433NOTES:F S .D1) Add Suffix “S” for Scallop wire management detail available on Flat Edge worksurfaces only.No upcharge. Example: FP3024SLS2) Add Suffix “N” to model number for no grommets, no upcharge. Example: FP3630SRN1st Option:Laminate orVeneer Finish:See insidefront coverfor finishes.E .Example: FV3024SL.CC511.MEZ.2nd Option:Edge TrimColor(Laminate only):See insidefront coverfor finishes.3rd Option:Grommet Type:P Oval Plastic (will match edge trim onlaminate; will be E2 on ALL Maple orE4 on ALL Cherry veneers)M Oval Metal (no upcharge on veneer; add$10 per grommet for laminate)S Square Metal (no upcharge on veneer;add $10 per grommet for laminate)D D Discontinued 8/29/20104th Option:Grommet Color(Metal only):Oval:E4 Black (veneer only)EZ Bronze (veneer only)EL Matte SilverSquare:EL Matte SilverShippable by small-package carrier.304 | Systems Supplement – 3/2013SDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD D

Reach ® — Worksurfaces• Tops cover two storage units of same ordifferent widths.• When used in an application with 1 or 2panel frames top, dimension will not coverframe(s).• When used in an application with 1 or 2metal finished ends, top dimension will coverend(s).Reach Storage Unit TopsGSA SIN 711-1OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.PrefixFP Laminate w/FlatFV VeneerF T– E.Flat Edge “P” Laminate Veneeror Veneer “V” Ship w/Flat V1Width Depth Model Weight Cubes List Price List PriceReach Storage Unit Top — Use with 2 Storage Units in line, with 2 Panel Frames72"W 20"D F b T-7220NE 75 3.7 $ 427 $ 80878"W 20"D F b T-7820NE 79 3.9 $ 586 $ 86484"W 20"D F b T-8420NE 83 4.1 $ 711 $ 90590"W 20"D F b T-9020NE 87 4.3 $ 749 $ 95096"W 20"D F b T-9620NE 91 4.5 $ 800 $1017Reach Storage Unit Top — Use with 2 Storage Units in line with 1 Panel Frame and 1 Metal Finished End72 7 ⁄8"W 20"D F b T-72201E 75 3.7 $ 466 $ 82478 7 ⁄8"W 20"D F b T-78201E 79 3.9 $ 644 $ 88384 7 ⁄8"W 20"D F b T-84201E 83 4.1 $ 725 $ 95190 7 ⁄8"W 20"D F b T-90201E 87 4.3 $ 766 $101796 7 ⁄8"W 20"D FVT-96201E 91 4.5 N/A $1037Reach Storage Unit Top — Use with 2 Storage Units in line with 2 Metal Finished Ends73 3 ⁄4"W 20"D F b T-72202E 75 3.7 $ 495 $ 84579 3 ⁄4"W 20"D F b T-78202E 79 3.9 $ 691 $ 88485 3 ⁄4"W 20"D F b T-84202E 83 4.1 $ 741 $ 92891 3 ⁄4"W 20"D F b T-90202E 87 4.3 $ 783 $ 97397 3 ⁄4"W 20"D FVT-96202E 91 4.5 N/A $10611st Option:Surface Finish(Laminate orVeneer):See inside frontcover for finishes.EExample: FPT-7220NE.TM33.EU.2nd Option:Edge Color(Laminate Topsonly):See inside frontcover for finishes.Systems Supplement – 3/2013 allsteeloffice.com | 305REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESReach ® — WorksurfacesTerrace Cantilever Brackets (handed)• Cantilever support. Handed for left- orright-hand applications.• No assembly required.• 24"D accommodates 24" and 30"Dworksurfaces.• 18"D accommodates 18" and 20"Dworksurfaces.• Includes tie bracket and attachmenthardware.• Shared applications require both left- andright-hand brackets.How to specify —Select the TerraceModel Numberfrom above.T .Terrace Brackets and SupportsGSA SIN 711-1Ship Core Paint SelectDescription Model Weight Cubes List Price List PriceCantilever Bracket — Terrace24" or 30"D Left-Hand24" or 30"D Right-Hand18"D Left-Hand18"D Right-HandT6CB24LT6CB24RT6CB18LT6CB18R7777SSSS0.60.60.60.6$$$$48484343$$$$57575252Worksurface Bracket Kit — TerraceOne pair T6BK 1 S 0.1 $ 40 $ 48NOTE: Cannot be used with 30"H frames.Support Columns — Terrace29 1 ⁄2"H / 3" Diameter TT629SC 13 S 1.1 $ 143 $ 17228 1 ⁄2"H / 3" Diameter TT628SC 13 S 1.1 $ 143 $ 172Support Column — Height-AdjustableFor 26 1 ⁄2" to 29 1 ⁄2"H – 3" Diameter TWSC-29 11 S .4 $ 401 $ 4301st Option:Paint:See inside frontcover for finishes.PExamples: T6CB24L.P4JWorksurface Bracket Kit• Brackets — one pair.• Attachment hardware included.Support Columns• Includes column, worksurface bracket kitT6BK, attaching hardware and adjustableglides.T6CB18L.P02Shippable by small-package carrier.306 | Systems Supplement – 3/2013S

Reach ® — WorksurfacesConcensys Cantilever Brackets (handed)• Cantilever support. Handed for left- orright-hand applications.• No assembly required.• 24"D accommodates 24" and 30"Dworksurfaces.• 18"D accommodates 18" and 20"Dworksurfaces.• Includes tie bracket and attachmenthardware.• Shared applications require both left- andright-hand brackets.Worksurface Bracket Kit• Brackets — one pair.• Attachment hardware included.Support Column• Includes column, worksurface bracket kitT6BK, attaching hardware and adjustableglides.Concensys Brackets and SupportsGSA SIN 711-1OVERHEADS & HUTCHESHow to specify —Select the ConcensysModel Numberfrom above..Ship Core Paint SelectDescription Model Weight Cubes List Price List PriceCantilever Bracket — Concensys24" or 30"D Left-Hand24" or 30"D Right-Hand18"D Left-Hand18"D Right-HandCCB24LCCB24RCCB18LCCB18R7777SSSS0.60.60.60.6$$$$48484343$$$$57575252Worksurface Bracket Kit — ConcensysOne Pair 831099 1 S 0.1 $ 40 $ 49Support Columns — ConcensysFor 29 1 ⁄2" Height, 3" Diameter 830299 13 S 1.1 $ 143 $ 1721st Option:Paint:See inside frontcover for finishes.PExamples: CCB24L.P4JCCB18L.P02Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 307SREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESStorageAlign Metal Pedestals — support or mobile, also available with veneer or Landscape frontsFile/File28 1 ⁄8"H x 15"W23 1 ⁄4", 29 1 ⁄4"DBox/Box/File28 1 ⁄8"H x 15"W23 1 ⁄4", 29 1 ⁄4"DFile/File26 1 ⁄2"H x 15"W23 1 ⁄4", 29 1 ⁄4"DAlign Metal Personal Files — also available with veneer frontsBox/Box/File /Lateral27 1 ⁄2"H x 30"W18 3 ⁄4"DFile/Box/Box /Lateral27 1 ⁄2"H x 30"W18 3 ⁄4"DBox/Box/File /File/File27 1 ⁄2"H x 30"W18 3 ⁄4"DBox/Box/File26 1 ⁄2"H x 15"W23 1 ⁄4", 29 1 ⁄4"DAlign Metal Personal Towers — also available with veneer fronts3-High39 1 ⁄2"H x 24"W24"D4-High51 1 ⁄2"H x 24"W24"DFile/Box/Box /File/File27 1 ⁄2"H x 30"W18 3 ⁄4"DBox/File20 1 ⁄2"H x 15"W23 1 ⁄4", 29 1 ⁄4"DBox/Box/File /File/File / Lateral39 1 ⁄2"H x 30"W18 3 ⁄4"DOverview of StorageGSA Reference PageStorage is an essential part of the productive workplace.Make storage a matter of personal choice as well as necessity. Choose from features like multiple pull styles, custom drawer sizes, paint finishes,and more. It’s your workspace. Shouldn’t it look like it?PERSONAL STORAGE1. Pedestal.Freestanding, support,mobile, or suspended, withthree drawer sizes.2. Personal file.Combines pedestal andlateral storage to create apersonal filing solution forletter and legal sizedocuments.3. Personal tower.Versatile storage with a smallfootprint. It’s storage thatgoes up, not out. Combinedrawers, personal storage,and wardrobe options for theright solution.LATERALS AND SHARED STORAGE4. Lateral file.The storage workhorse, inmultiple heights and widths.Works with systems furnitureor by itself. Hoteling andCustom Lateral optionsavailable.5. Combination file.The perfect combination offile storage and shelf storage,with concealed or openshelves.6. Storage cabinet.Equipped with hinged,locking doors and adjustableshelves to conceal and securesupplies.7. Bookcases.Quick access to information,in depths to match laterals ornarrower profiles to stand ontheir own.NOTE: This Systems Supplemental Price List only contains a small subset of models and pricing of some of the more frequently used storagemodels for Terrace 3.4 and 2.6. For complete storage specification information and the entire Allsteel storage product offering please referencethe Systems Specification Guide and Systems Price List. You will find veneer front models, Landscape Surfaces models, combination files,bookcases, storage cabinets, and much more.5-High67 5 ⁄8"H x 24"W24"DFile/Box/Box /File/File / Lateral39 1 ⁄2"H x 30"W18 3 ⁄4"D308 | Systems Supplement – 3/2013

Personal StoragePersona PedestalsSupportMobileOverview of Personal StorageGSA Reference PageOVERHEADS & HUTCHESFile/File28 1 ⁄8"H x 15"W23 3 ⁄8", 29 3 ⁄8"DBox/Box/File28 1 ⁄8"H x 15"W23 3 ⁄8", 29 3 ⁄8"DFile/File28"H x 15"W23 3 ⁄8", 29 3 ⁄8"DEssentials Pedestals — Ball-Bearing SlidesFreestanding or SupportFile/File26 7 ⁄8", 28"H x 15"W19 7 ⁄8", 22 7 ⁄8", 28 7 ⁄8"DFile/File26 7 ⁄8", 28"H x 15"W19 7 ⁄8", 22 7 ⁄8", 28 7 ⁄8"DEssentials Personal File28"H x 18"D x 30"WEssentials Personal TowersBox/Box/File26 7 ⁄8", 28"H x 15"W19 7 ⁄8", 22 7 ⁄8", 28 7 ⁄8"DMobileBox/Box/File26 7 ⁄8", 28"H x 15"W19 7 ⁄8", 22 7 ⁄8", 28 7 ⁄8"D48 1 ⁄2"H, 64 1 ⁄4"H x 24"D x 24"WSuspendedBox/File19 1 ⁄2"H x 15"W19 7 ⁄8", 22 7 ⁄8"DBox/File22 1 ⁄2"H x 15"W22 7 ⁄8"DBox/Box/File28"H x 15"W23 3 ⁄8", 29 3 ⁄8"DBox/File22"H x 15"W23 3 ⁄8", 29 3 ⁄8"DEssentials Personal Towers with Open Side Shelf48 1 ⁄2"H, 64 1 ⁄4"H x 24"D x 24"WREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 309

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESPedestals• Double-wall drawer construction.• Steel, ball-bearing slide suspension withfull-extension drawers.• Support pedestals not used to support aworksurface require a pedestal top(ASPT-XXXX) on page 314 andcounterweight kit (2282) on page 315.• Box/File, Box/Box/File or File/File drawers.• To allow clearance under worksurfaces, anAlign mobile pedestal is 1 1 ⁄2" shorter than anequivalent Align support pedestal. This,combined with the leveling range of Alignsupport pedestals, personal files, towers, andlaterals, will result in an offset of horizontaldrawer reveals of 1 1 ⁄2" to 3".Square Pulls shownHow to specify —Select theModel Numberfrom above.Y I B –• Counterweight is standard in mobilepedestals.• Heavy-duty steel O-frame.• File drawer front reveals of support pedestalswill align with laterals.• Pencil trays included — one per pedestal witha box drawer.• Box drawers have adjustable divider.• File drawers have adjustable compressor.• Standard core removable locks.• Accessories on page 315.• Leveling glides on freestanding pedestals.• For locking specification, see pages 340-342.• Hardware for attaching pedestal toworksurface is included.2nd Option:Paint:See inside frontcover for finishes.P .3rd Option:Pull Color:Arch PullE4 BlackEL Matte SilverSquare PullEL Matte SilverE .Align Support and Mobile Pedestals4th Option:Lock:STD StandardOMT Omit LockCore(Deduct$16)• 28 1 ⁄8"H pedestals can be used to supportworksurface at 29 1 ⁄2"H.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceSupport Pedestal 28 1 ⁄8"H — File/File — Metal Case/Metal Fronts23 1 ⁄4"D x 15"W YIB-242 b 98 8.0 $ 854 $ 91129 1 ⁄4"D x 15"W YIB-302 b 113 9.8 $ 870 $ 927NOTE: Order backs separately for desking applications. See page 314.Support Pedestal 28 1 ⁄8"H — Box/Box/File — Metal Case/Metal Fronts23 1 ⁄4"D x 15"W YIB-243 b 98 8.0 $ 854 $ 91129 1 ⁄4"D x 15"W YIB-303 b 113 9.8 $ 870 $ 927NOTE: Order backs separately for desking applications. See page 314.Mobile Pedestal 26 1 ⁄2"H — File/File — Metal Case/Metal Fronts23 1 ⁄4"D x 15"W YMS-242 b 140 8.0 $ 950 $100729 1 ⁄4"D x 15"W YMS-302 b 148 9.8 $ 980 $1037Mobile Pedestal 26 1 ⁄2"H — Box/Box/File — Metal Case/Metal Fronts23 1 ⁄4"D x 15"W YMS-243 b 140 8.0 $ 950 $100729 1 ⁄4"D x 15"W YMS-303 b 148 9.8 $ 980 $1037Mobile Pedestal 20 1 ⁄2"H — Box/File — Metal Case/Metal Fronts23 1 ⁄4"D x 15"W YMS-24B b 128 7.0 $ 806 $ 86329 1 ⁄4"D x 15"W YMS-30B b 140 8.8 $ 837 $ 8941st Option:Pull Option:A Arch PullS Square PullI Integral Pull.Examples: YIB-243A.P02.EL.STDELYMS-243A.P02.E4.STDE4GSA SIN 711-1For specification details, refer to the Pedestalssection in the Systems Specification Guide.AArch Pull5th Option:LockColor:E4 BlackEL MatteSilver310 | Systems Supplement – 3/2013ESSquare PullIIntegral Pull

Personal Files• Available in 2- and 3-high.• Freestanding, mobile (with Storage Creeper)or worksurface supporting.• Drawer reveal alignment matches Alignsupport pedestals.• Includes pencil tray as standard option.• Laminate and veneer tops available on page326.NoteCounterweight kits are required forfreestanding personal files (i.e., files that arenot positioned under a worksurface, ganged toan adjacent file or bolted to the floor or wall).See page 325.Align Personal FilesGSA SIN 711-3For specification details, refer to the PersonalStorage section in the Systems SpecificationGuide.OVERHEADS & HUTCHESAArch PullSSquare PullIIntegral PullYPF-184LYPF-185LYPF-186LYPF-184RYPF-185RYPF-186RHow to specify —Select theModel Numberfrom above.YPF–18Ship Core Paint Select PaintDescription Model Weight Cubes List Price List Price27 1 ⁄2"H Personal File — 30"W x 18 3 ⁄4"D — Metal Case/Metal Fronts 2-HighBox/Box/File / Lateral YPF-184L b 155 12.3 $1391 $1465File/Box/Box / Lateral YPF-184R b 155 12.3 $1391 $1465Box/Box/File / File/File YPF-185L b 155 12.3 $1391 $1465File/Box/Box / File/File YPF-185R b 155 12.3 $1391 $146539 1 ⁄2"H Personal File — 30"W x 18 3 ⁄4"D — Metal Case/Metal Fronts 3-HighBox/Box/File / File/File / Lateral YPF-186L b 210 18.8 $1775 $1882File/Box/Box / File/File / Lateral YPF-186R b 210 18.8 $1775 $18821st Option:Pull:A Arch PullS Square PullI Integral Pull.2nd Option:Paint:See inside frontcover for finishes.Example: YPF-184RI.P02.STDEL3rd Option:Pull Color:Arch PullE4 BlackEL Matte SilverSquare PullEL Matte SilverP . E .4th Option:Lock Type:STD StandardOMT Omit LockCore (Deduct$16)5th Option:LockColor:E4 BlackEL Matte SilverSystems Supplement – 3/2013 allsteeloffice.com | 311EREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESPersonal Towers• Matches Lateral heights.• Wardrobe is 9"W.• Cabinet door on 4- and 5-high units includeone adjustable shelf.• One lock secures drawers and door(s).• Coat rod included in wardrobe portion of4- and 5-high units.• In back-to-back applications, it isrecommended to place a panel between units.YPT324LFFFYPT424LBBFYPT524LFFFYPST424RFFYPST524RFFSelect theModel Numberfrom above.1st Option:Pull:A Arch PullS Square PullI Integral Pull.2nd Option:Paint:See inside frontcover for finishes.Example: YPT424LFFA.P02.EL.STDEL• Side Access models include one worksurfacebracket that is compatible with Align,Terrace, and Concensys. 69"H ConcensysLow Profile Panels are shorter than 5 -highpersonal towers.• To file side-to-side, order hanging framesseparately on page 315.39 1 ⁄2"H Personal Tower — 24"W x 24"D — Metal Case/Metal Fronts 3-High3rd Option:Pull Color:Arch Pull:EL Matte SilverE4 BlackSquare Pull:EL Matte SilverP . E .Align Personal TowersGSA SIN 711-3For specification details, refer to the PersonalStorage section in the Systems SpecificationGuide.Wardrobe Left / File/File/File YPT324LFFF b 190 19.0 $2540 $2643Wardrobe Right / File/File/File YPT324RFFF b 190 19.0 $2540 $2643Wardrobe Left / Box/Box/File/File YPT324LBBFF b 190 19.0 $2540 $2643YPT324RBBFF Wardrobe Right / Box/Box/File/File YPT324RBBFF b 190 19.0 $2540 $2643YPT424RFFYPT524RBBFPTS15Ship Core Paint Select PaintDescription Model Weight Cubes List Price List Price51 1 ⁄2"H Personal Tower — 24"W x 24"D — Metal Case/Metal Fronts 4-HighWardrobe Left / File/File YPT424LFF b 220 23.0 $2681 $2815Wardrobe Right / File/File YPT424RFF b 220 23.0 $2681 $2815Wardrobe Left / Box/Box/File YPT424LBBF b 220 23.0 $2681 $2815Wardrobe Right / Box/Box/File YPT424RBBF b 220 23.0 $2681 $281567 5 ⁄8"H Personal Tower — 24"W x 24"D — Metal Case/Metal Fronts 5-HighWardrobe Left / File/File YPT524LFF b 260 28.2 $2816 $2982Wardrobe Right / File/File YPT524RFF b 260 28.2 $2816 $2982Wardrobe Left / Box/Box/File YPT524LBBF b 260 28.2 $2816 $2982Wardrobe Right / Box/Box/File YPT524RBBF b 260 28.2 $2816 $2982Wardrobe Left / File/File/File YPT524LFFF b 260 28.2 $2816 $2982Wardrobe Right / File/File/File YPT524RFFF b 260 28.2 $2816 $2982Shelves — Extra shelves for Personal TowerFor cabinet door — 13 3 ⁄4"W x 20 7 ⁄16"D PTS15 5 2.0 $ 65 $ 79For wardrobe door — 7 3 ⁄4"W x 20 7 ⁄16"D PTS09 5 2.0 $ 55 $ 6951 1 ⁄2"H Personal Side Access Tower — 24"W x 24"D — Metal Case/Metal Fronts 4-HighWardrobe Left / File/File YPST424LFF b 220 23.0 $2742 $2876Wardrobe Right / File/File YPST424RFF b 220 23.0 $2742 $2876Wardrobe Left / Box/Box/File YPST424LBBF b 220 23.0 $2742 $2876YPST424RBBFWardrobe Right / Box/Box/File YPST424RBBF b 220 23.0 $2742 $287667 5 ⁄8"H Personal Side Access Tower — 24"W x 24"D — Metal Case/Metal Fronts 5-HighWardrobe Left / File/File YPST524LFF b 260 28.2 $2877 $3043Wardrobe Right / File/File YPST524RFF b 260 28.2 $2877 $3043Wardrobe Left / Box/Box/File YPST524LBBF b 260 28.2 $2877 $3043Wardrobe Right / Box/Box/File YPST524RBBF b 260 28.2 $2877 $3043YPST524RBBFShelf — Bottom shelf without Bracket for Freestanding Personal Side Access TowerYPSTBS24How to specify —AArch PullFor Side Access — 22 3 ⁄8"W x 13 5 ⁄8"D YPSTBS24 5 2.0 $ 67 $ 794th Option:Lock Type:STD StandardOMT Omit Lock Core(Deduct $16)SSquare Pull5th Option:Lock Color:E4 BlackEL Matte Silver312 | Systems Supplement – 3/2013EIIntegral Pull

Pedestals• Double-wall drawer construction.• Steel, ball-bearing slide suspension withfull-extension drawers.• Two pull options:– Arch in Matte Silver or Black– Integral in same color as pedestal• Support pedestals not used to support aworksurface require a pedestal top(ASPS-XXST) on page 314 and counterweightkit (2282) on page 315.• Pencil trays included — one per pedestal witha box drawer.• Box/File, Box/Box/File or File/File drawers.(Integral Pulls shown)How to specify —Select theModel Numberfrom above.TSP –Support Pedestal 28 1 ⁄8"H — File/FilePersona Support and Mobile Pedestals23 3 ⁄8"D x 15"W TSPIB-242 b 98 8.0 $ 910 $ 97129 3 ⁄8"D x 15"W TSPIB-302 b 113 9.8 $ 927 $ 988Support Pedestal 28 1 ⁄8"H — Box/Box/File• Heavy-duty steel O-frame.• Box drawers have adjustable divider.• File drawers have adjustable compressor.• Standard core removable locks.• Accessories on page 315.• Leveling glides on support pedestals.• For locking specification, see pages 340-342.• Attachment plates for mounting worksurfaceto pedestal are included — must be fieldinstalled.• 28 1 ⁄2"H pedestals can be used to supportworksurface at 29 1 ⁄2"H.• Counterweight is standard in mobilepedestals.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List Price23 3 ⁄8"D x 15"W TSPIB-243 b 98 8.0 $ 910 $ 97129 3 ⁄8"D x 15"W TSPIB-303 b 113 9.8 $ 927 $ 988Mobile Pedestal 28"H — File/File with Flat Steel Top23 3 ⁄8"D x 15"W TSPMS-242 b 140 8.0 $1011 $107229 3 ⁄8"D x 15"W TSPMS-302 b 148 9.8 $1045 $1106Mobile Pedestal 28"H — Box/Box/File with Flat Steel Top23 3 ⁄8"D x 15"W TSPMS-243 b 140 8.0 $1011 $107229 3 ⁄8"D x 15"W TSPMS-303 b 148 9.8 $1045 $1106Mobile Pedestal 22"H — Box/File with Flat Steel TopNote: Suspended pedestals cannot be mounteddirectly adjacent to cantilever bracket ormounted on bridge or peninsula. They must bemounted at end of worksurface.23 3 ⁄8"D x 15"W TSPMS-24B b 128 7.0 $ 857 $ 91829 3 ⁄8"D x 15"W TSPMS-30B b 140 8.8 $ 892 $ 9531st Option:Pull Option:A Arch PullI Integral PullS Square Pull.2nd Option:Paint:See inside frontcover for finishes.P .Examples: TSPIB-243A.P02.EL.STD3rd Option:Pull Color:Arch PullE4 BlackEL Matte SilverE .TSPMS-243A.P02.EL.STDFor use with:Concensys, Cadence, and TerraceAArch Pull4th Option:Lock:STD StandardOMT Omit LockCore(Deduct $16)GSA SIN 711-1, 711-2IIntegral PullSSquare PullSystems Supplement – 3/2013 allsteeloffice.com | 313OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESPedestalsField installed tops create additional work andstorage areas on mobile pedestals.• Particle board construction in laminate tops.• 27 1 ⁄2"H or higher Mobile pedestal with anytop on this page (except metal top) cannot bestored under 29" high worksurface.How to specify —Select theModel Numberfrom above.Laminate Top with Flat EdgeAlign and Persona Mobile Pedestal Tops and BackShipSelect PaintDescription Model Weight Cubes List Price List Price23 1 ⁄2"D ASPTP-24LL 12 1.2 $ 178 N/A29 1 ⁄2"D ASPTP-30LL 14 1.5 $ 218 N/AMetal Top (for converting Persona freestanding pedestals to mobile)23 1 ⁄2"D ASPS-24ST 6 1.0 $ 160 $ 17129 1 ⁄2"D ASPS-30ST 7 1.2 $ 182 $ 193Metal Pedestal Back (for Align metal pedestal case)29 1 ⁄2"H x 15"W YPB29PM 10 S 0.6 $ 220 $ 242Ship V1 V3 V5Description Model Weight Cubes List Price List Price List PriceVeneer TopAdd FC to end of Seat Cushion modelfor CTB133 / Boston Fire Code /NY/NJ Port Authority ($90 extra)ASP .• Seat cushion provides quick and convenientadditional seating.• Seat cushion to be used on metal top pedestalonly — adds approximately 2"H to pedestal.Align Pedestal Back• Used in absence of modesty panels inLight-scale desking applications.• Includes all mounting hardware and trim.24"D ASPTP-24LW 12 1.2 $ 540 $ 589 $ 65730"D ASPTP-30LW 14 1.5 $ 562 $ 615 $ 6851st Option:Paint:Steel Top only.See insidefront coverfor finishes.P .Examples: ASPTP-24LL.TM20.E22nd Option:Laminate orVeneer Typeand Finish:See insidefront coverfor finishes.ASPT-24SC.CS918314 | Systems Supplement – 3/2013.3rd Option:Edge:Laminate Flat EdgeTops only.See insidefront coverfor finishes.E .GSA SIN 711-1, 711-2Flat Edge DetailList PriceDescription Grade Grade Grade Grade Grade Grade Grade Grade Grade Grade Grade GradeModel A B C D E F G H J K M NSeat Cushion — For Metal Mobile Pedestals only (Specify seating fabric — no leathers)23 1 ⁄2"D ASPT-24SC $ 140 $ 158 $ 174 $ 185 $ 200 $ 214 $ 226 $ 240 $ 254 $ 267 $ 281 $ 30129 1 ⁄2"D ASPT-30SC $ 197 $ 215 $ 231 $ 242 $ 257 $ 271 $ 283 $ 297 $ 311 $ 324 $ 338 $ 358NOTE: 23 1 ⁄2"D — ship weight 10, cubes 1.2; 29 1 ⁄2"D — ship weight 12, cubes 1.5Only Option for Seat Cushion:Upholstery:SSpecify seating upholstery.Shippable by small-package carrier.

PedestalsAccessories• Mobile pedestal conversion kit allowsPersona freestanding pedestal to be fieldconverted into a mobile pedestal. Includesmobile base and counterweights. Pedestaltops specified separately.Align and Persona Pedestal AccessoriesGSA SIN 711-1, 711-2OVERHEADS & HUTCHESShipModel Description Weight Cubes List PriceHow to specify —Select theModel Numberfrom above.Hanging Frames for Cross Filing in Letter DrawerDouble set for 30"D drawer 2084-000 D D3 .5D DSingle set for 24"D drawer 2085-000 2 .5 $ 18Box Drawer AccessoriesPencil Tray (Black only) 2280-000 2 .5 $ 25Box Drawer Divider 2281-000 2 .5 $ 17Sliding Reference ShelfWith Plexiglas Cover 2285-000 D8 1.3DCompressorFor File Drawers 2080-000 D4 1.0DCounterweightsFor 22"H Pedestals 2282-300 19.5 3.0 $ 126For 28"H Pedestals 2282-400 25.8 4.8 $ 137Mobile Pedestal Conversion Kit — Persona freestanding to Persona mobile23 3 ⁄8"D Box/File Pedestals T2283-324 26.7 3.0 $ 19129 3 ⁄8"D Box/File Pedestals T2283-330 28.4 4.8 $ 20423 3 ⁄8"D B/B/F or F/F Pedestals T2283-424 33.0 5.0 $ 20029 3 ⁄8"D B/B/F or F/F Pedestals T2283-430 34.7 6.8 $ 219D D Discontinued 2/12/2012D Discontinued 8/29/2010REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXExamples: T2283-324 2282-300 2080-000Systems Supplement – 3/2013 allsteeloffice.com | 315

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESPedestals• Steel, ball-bearing slide suspension withfull-extension on file drawers, 90% extensionon box drawers.• Follower block in each file drawer.• File drawer has high sides to allowfront-to-back filing.• Side-to-side filing utilizes follower block andcross rail both standard in all pedestals.• Pencil tray included — one per pedestal withbox drawers.How to specify —Select theModel Numberfrom above.P 1 – .Ship Core Paint Select PaintDescription Model Weight Cubes List Price List PriceFreestanding Pedestals 26 7 ⁄8"H — File/File19 7 ⁄8"D x 15"W PF177-202 b 65 6.6 $ 501 $ 55622 7 ⁄8"D x 15"W PF177-232 b 70 7.5 $ 523 $ 57828 7 ⁄8"D x 15"W PF177-302 b 83 9.2 $ 540 $ 595Freestanding Pedestals 26 7 ⁄8"H — Box/Box/File19 7 ⁄8"D x 15"W PF167-203 b 69 6.6 $ 501 $ 55622 7 ⁄8"D x 15"W PF167-233 b 73 7.5 $ 523 $ 57828 7 ⁄8"D x 15"W PF167-303 b 87 9.2 $ 540 $ 595Support Pedestals 28"H — File/File19 7 ⁄8"D x 15"W PF198-202 b 65 6.8 $ 546 $ 60122 7 ⁄8"D x 15"W PF198-232 b 70 7.7 $ 567 $ 62228 7 ⁄8"D x 15"W PF198-302 b 83 9.5 $ 585 $ 640Support Pedestals 28"H — Box/Box/File19 7 ⁄8"D x 15"W PF197-203 b 69 6.8 $ 546 $ 60122 7 ⁄8"D x 15"W PF197-233 b 73 7.7 $ 567 $ 62228 7 ⁄8"D x 15"W PF197-303 b 87 9.5 $ 585 $ 640NOTE: 28"H Pedestals have a higher base plate resulting in a taller overall cabinet height. Consideration must be givento ensure that units align visually with each other and selected laterals.Suspended Pedestals 19 1 ⁄2"H — Box/File19 7 ⁄8"D x 15"W PH149-202 b 44 5.1 $ 427 $ 48222 7 ⁄8"D x 15"W PH149-232 b 48 5.8 $ 446 $ 5011st Option:Drawer Pull:A ArchI IntegralB Beveled2nd Option:Paint:See inside frontcover for finishes.P .Examples: PH149-202B.P02.STDEssentials Freestanding, Support, and Suspended PedestalsBall-Bearing SuspensionGSA SIN 711-1, 711-2• Freestanding and support units have fourleveling glides.• Counterweight is standard in mobile pedestals.• Freestanding and support pedestals not usedto support a worksurface require acounterweight kit on page 319.• Box drawers have adjustable divider.• Caster package available to field convertsupport or freestanding pedestals to mobile.• Standard core removable locks.• Pedestal accessories on page 319.3rd Option:Pull Color:Arch Pull onlyEL Matte SilverE4 BlackPF167203A.P27.EL.STD316 | Systems Supplement – 3/2013.For specification details, refer to the Workingwith Essentials Pedestals section in the SystemsSpecification Guide.• For improved aesthetics on 28"H pedestals,order flush mount kick plates on page 319.AArch Pull4th Option:Lock Option:STD StandardOMT Omit LockCore(Deduct $16)IIntegral PullBBeveled Pull

Pedestals• Steel, ball-bearing slide suspension withfull-extension on file drawers, 90% extensionon box drawers.• Follower block in each file drawer.• File drawer has high sides to allowfront-to-back filing.• Side-to-side filing utilizes follower block andcross rail both standard in all pedestals.• Pencil tray included — one per pedestal withbox drawers.• Counterweight is standard in mobilepedestals.• Box drawers have adjustable divider.• Rear casters swivel, front casters are fixed.• Standard core removable locks.• Pedestal accessories on page 319.• Adjustable glide kit available to field convertmobile pedestals to freestanding.• Casters on Box/File mobile pedestal requireinstallation.Essentials Mobile PedestalsBall-Bearing SuspensionGSA SIN 711-1, 711-2For specification details, refer to the Workingwith Essentials Pedestals section in the SystemsSpecification Guide.• For improved aesthetics on 28"H pedestals,order flush mount kick plates on page 319.OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.PM1 – .AArch PullIIntegral PullBBeveled PullShip Core Paint Select PaintDescription Model Weight Cubes List Price List PriceMobile Pedestal 26 7 ⁄8"H — File/File19 7 ⁄8"D x 15"W PM138-202 b 80 6.6 $ 510 $ 56622 7 ⁄8"D x 15"W PM138-232 b 85 7.5 $ 533 $ 58928 7 ⁄8"D x 15"W PM138-302 b 98 9.2 $ 551 $ 607Mobile Pedestal 26 7 ⁄8"H — Box/Box/File19 7 ⁄8"D x 15"W PM137-203 b 84 6.6 $ 510 $ 56622 7 ⁄8"D x 15"W PM137-233 b 88 7.5 $ 533 $ 58928 7 ⁄8"D x 15"W PM137-303 b 102 9.2 $ 551 $ 607Mobile Pedestal 28"H — File/File19 7 ⁄8"D x 15"W PM188-202 b 80 6.8 $ 557 $ 61322 7 ⁄8"D x 15"W PM188-232 b 85 7.7 $ 578 $ 63428 7 ⁄8"D x 15"W PM188-302 b 98 9.5 $ 596 $ 652Mobile Pedestal 28"H — Box/Box/File19 7 ⁄8"D x 15"W PM187-203 b 84 6.8 $ 557 $ 61322 7 ⁄8"D x 15"W PM187-233 b 88 7.7 $ 578 $ 63428 7 ⁄8"D x 15"W PM187-303 b 102 9.5 $ 596 $ 652NOTE: 28"H Pedestals have a higher base plate resulting in a taller overall cabinet height. Consideration must be givento ensure that units align visually with each other and selected laterals.Mobile Pedestal 22 1 ⁄2"H — Box/File22 7 ⁄8"D x 15"W PM119-232 b 60 6.0 $ 454 $ 5101st Option:Drawer Pull:A ArchI IntegralB Beveled2nd Option:Paint:See inside frontcover for finishes.P .Examples: PM137-203B.P02.STD3rd Option:Pull Color:Arch Pull onlyEL Matte SilverE4 BlackSystems Supplement – 3/2013 allsteeloffice.com | 317.PM187-233A.P02.E4.STD4th Option:Lock Option:STD StandardOMT Omit LockCore(Deduct $16)REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESPersonal Files and TowersEssentials Personal File• Ball-bearing suspension on all drawers.• Matches inset drawer design of Essentials28"H Laterals.• One lock secures entire unit.• Worksurface supporting.• Includes counterweights.• Box and file drawers can be reconfigured inthe field for either right- or left-handconfiguration.ET42424LFFET52424LFFET52424ROFFETKP24WLEEPF23018ET42424LOFFET52424LBBFET52424ROBBFHow to specify —Select theModel Numberfrom above.ETKP24WR28"H Personal File — 30"W x 18"D — 2-HighP .Essentials Personal File and TowersShipSelect PaintDescription Model Weight Cubes List Price List PriceFile/Box/Box / Lateral EPF23018 b 144 11.8 $1105 $117848 1 ⁄2"H 4-High Personal Tower — 24"W x 24"D — 4-HighWardrobe Left / File/File ET42424LFF b 220 23.0 $1681 $1847Wardrobe Right / File/File ET42424RFF b 220 23.0 $1681 $1847Wardrobe Left / Box/Box/File ET42424LBBF b 220 23.0 $1681 $1847Wardrobe Right / Box/Box/File ET42424RBBF b 220 23.0 $1681 $184748 1 ⁄2"H Personal Tower with Open Side Shelves — 24"W x 24"D — 4-HighWardrobe Left / File/File / Open Side Shelves ET42424LOFF b 220 23.0 $1681 $1847Wardrobe Right / File/File / Open Side Shelves ET42424ROFF b 220 23.0 $1681 $1847Wardrobe Left / Box/Box/File / Open Side Shelves ET42424LOBBF b 220 23.0 $1681 $1847Wardrobe Right / Box/Box/File / Open Side Shelves ET42424ROBBF b 220 23.0 $1681 $184764 1 ⁄4"H Personal Tower — 24"W x 24"D — 5-HighWardrobe Left / File/File ET52424LFF b 233 26.6 $2043 $2209Wardrobe Right / File/File ET52424RFF b 233 26.6 $2043 $2209Wardrobe Left / Box/Box/File ET52424LBBF b 233 26.6 $2043 $2209Wardrobe Right / Box/Box/File ET52424RBBF b 233 26.6 $2043 $220964 1 ⁄4"H Personal Tower with Open Side Shelves — 24"W x 24"D — 5-HighWardrobe Left / File/File / Open Side Shelves ET52424LOFF b 203 26.6 $2043 $2209Wardrobe Right / File/File / Open Side Shelves ET52424ROFF b 203 26.6 $2043 $2209Wardrobe Left / Box/Box/File / Open Side Shelves ET52424LOBBF b 203 26.6 $2043 $2209Wardrobe Right / Box/Box/File / Open Side Shelves ET52424ROBBF b 203 26.6 $2043 $2209Flush Front Kick Plate for 24"W TowersFor Wardrobe Left Models ETKP24WL 2 0.1 $ 102 $ 111For Wardrobe Right Models ETKP24WR 2 0.1 $ 102 $ 1111st Option:Pull:A ArchI IntegralB BeveledExample: EPF23018B.P02.STDEssentials Personal Towers• Matches full front drawer design withrecessed base plate of Essentials Pedestals.• Three keyed alike locks secure doors anddrawers. Two keyed-alike locks on Towersw/Side Shelves.• 9"W wardrobe portion includes a fixed shelf,coat hook and coat rod.• 48 1 ⁄2"H Towers with door or open side haveone adjustable shelf and one fixed shelf.• 64 1 ⁄4"H Towers with door or open side havetwo adjustable shelves and one fixed shelf..2nd Option:Paint:See inside frontcover for finishes.3rd Option:Pull Color:Arch Pull onlyEL Matte SilverE4 BlackE .GSA SIN 711-3For specification details, refer to the Workingwith Essentials section in the SystemsSpecification Guide.NOTE: Essentials pedestals and towers have afull front drawer design with a recessed baseplate. Consider optional flush front kick plate ifplaced side-by-side of personal file or laterals.AArch Pull4th Option:Lock Type:IIntegral PullSTD StandardOMT Omit LockCore(Deduct $16)BBeveled Pull318 | Systems Supplement – 3/2013

Pedestals• Seat cushion provides quick and convenientadditional seating.• Seat cushion adds approximately 2"H topedestal.Essentials Spacers, Tops, and AccessoriesGSA SIN 711-1, 711-2For specification details, refer to the Workingwith Essentials Pedestals section in the SystemsSpecification Guide.OVERHEADS & HUTCHESHow to specify —Select theModel Numberfrom above.Add FC to end of Seat Cushion modelfor CTB133 / Boston Fire Code /NY/NJ Port Authority ($90 extra)ShipSelect PaintDescription Model Weight Cubes List Price List PriceSpacer (for use with 26 7 ⁄8"H Pedestals to attach to worksurfaces mounted at 29 1 ⁄2"H)19 7 ⁄8"D x 15"W x 1 3 ⁄8"H Thick PS116-20PC 6 S 0.2 $ 51 $ 6222 7 ⁄8"D x 15"W x 1 3 ⁄8"H Thick PS116-23PC 7 S 0.3 $ 64 $ 7528 7 ⁄8"D x 15"W x 1 3 ⁄8"H Thick PS116-30PC 8 S 0.4 $ 71 $ 82Laminate Tops – Flat Edge (for mobile and freestanding pedestals)20 1 ⁄2"D x 15"W x 1 1 ⁄4" Thick PT17-20TTP 13 S 1.0 $ 142 N/A23 1 ⁄2"D x 15"W x 1 1 ⁄4" Thick PT17-23TTP 15 S 1.1 $ 163 N/A29 1 ⁄2"D x 15"W x 1 1 ⁄4" Thick PT17-29TTP 19 S 1.4 $ 192 N/AAccessoriesPencil Tray (Black only) 2280-000 2 S 0.5 $ 25 N/AFollower Block — 1-Pack PFB80 1 S 0.3 $ 24 N/ABox Drawer Divider — 2 Pack PD80 .5 S 0.3 $ 20 N/AHanging File Cross Rails — 2-Pack P519495 .5 S 0.5 $ 19 N/A(for side-to-side filing)1Adjustable Glides — 4-Pack P20040AG 1 S 0.6 $ 39 N/AField-installable Hardware includedCaster Package — Field Installable P1050CST 1 S 0.6 $ 25 N/AFour Casters (2 swivel, 2 fixed)Counterweights for 22 1 ⁄2"H and 26 7 ⁄8"H Pedestals(do not specify color) 2282-300 19.5 3.0 $ 126 N/ACounterweights for 28"H Pedestals(do not specify color) 2282-400 25.8 4.8 $ 137 N/AFlush Front Kick Plate for 28"H Pedetals ETKP28H 3 0.2 $ 69 $ 76List PriceDescription Grade Grade Grade Grade Grade Grade Grade Grade Grade Grade Grade GradeModel A B C D E F G H J K M NSeat Cushion — For Metal Mobile Pedestals only (Specify seating fabric — no vinyls or leathers)23 1 ⁄2"D ASPT-24SC $ 140 $ 158 $ 174 $ 185 $ 200 $ 214 $ 226 $ 240 $ 254 $ 267 $ 281 $ 30129 1 ⁄2"D ASPT-30SC $ 197 $ 215 $ 231 $ 242 $ 257 $ 271 $ 283 $ 297 $ 311 $ 324 $ 338 $ 358NOTE: 23 1 ⁄2"D — ship weight 10, cubes 1.2; 29 1 ⁄2"D — ship weight 12, cubes 1.51st Option:Laminate(Tops only):See inside frontcover for finishes.. .2nd Option:Edge Color(Flat andT-Mold Edgeonly):See inside frontcover for finishes.EExample: PT17-20TTP.LT3B.E43rd Option:Paint:Spacer andKick Plate only.See inside frontcover for finishes.P .Only Option for Seat Cushion:Upholstery:Specify seating upholstery.Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 319SREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESShared StorageOverview of Lateral StorageGSA Reference PageNOTE: The Shared Storage section of this Systems Supplemental Price List only contains a very limited subset of lateral file models and pricingof some of the more frequently used storage models for Terrace 3.4 and 2.6. For complete storage specification information and the entireAllsteel Shared Storage product offering please reference the Systems Specification Guide and Systems Price List. There you will find veneerfront models, Landscape ® surfaces models, custom laterals, hoteling laterals, combination files, bookcases, storage cabinets, and manyadditional storage options.Align Metal Lateral Files — also available with veneer or Landscape fronts2-High27 1 ⁄2"H30", 36", 42"W18 3 ⁄4"D3-High39 1 ⁄2"H30", 36", 42"W18 3 ⁄4"DPersona Inset Lateral Files2-High27 3 ⁄4"H30", 36", 42"W18”DEssentials Lateral Files2-High27 1 ⁄4"H30", 36", 42"W18”D3-High39 3 ⁄4"H30", 36", 42"W18”D2-High28"H30", 36", 42"W18”D4-High51 1 ⁄2"H30", 36", 42"W18 3 ⁄4"D4-High52 3 ⁄4"H30", 36", 42"W18”D3-High39 1 ⁄8"H30", 36", 42"W18”D5-High67 5 ⁄8"H30", 36", 42"W18 3 ⁄4"D5-High64 3 ⁄4"H30", 36", 42"W18”D4-High52 1 ⁄2"H30", 36", 42"W18”D6-High76 3 ⁄4"H30", 36", 42"W18”D5-High64 1 ⁄4"H30", 36", 42"W18”D320 | Systems Supplement – 3/2013

Laterals• Square edge full front.• Three pull options:– Arch pull in Matte Silver and Black.– Square pull in Matte Silver.– Integral in same color as lateral.• Square and Arch metal pulls are customerinstalled.• All files are 18 3 ⁄4"D.• Files ship with glides fully recessed. Extendglides on 2-high files 3 ⁄4" to align with supportpedestals.• Hanging frames and dividers installed on-site.• 2-, 3-, and 4-High units have one lock.5-High units have two locks.How to specify —Select theModel Numberfrom above.YFLF2nd Option:Paint:See inside frontcover for finishes.P .Example: YFLF530S.P02.EL.STDEL•5-High units — lock on right hand side offourth drawer; hinge doors lock at bottom ofright hand door.• For locking specifications, see pages 340-342.• Tops are available — see page 326.• See page 325 for Lateral File Accessories.NoteCounterweight kits are required forfreestanding lateral files (i.e., files that are notpositioned under a worksurface, ganged to anadjacent file or bolted to the floor or wall).See page 325.3rd Option:Pull Color:Arch Pull:EL Matte SilverE4 BlackSquare Pull:EL Matte SilverE .4th Option:Lock:STD Standard LockOMT Omit Lock Core(Deduct $16per lock)Align LateralsGSA SIN 711-3For specification details, refer to the Workingwith Laterals section in the Systems SpecificationGuide.Exterior Ship Freight Core Paint Select List PaintWidth Description Model Model Weight Cubes Class List Price Price List Price27 1 ⁄2"H, two 12" drawers with hanging frames side-to-side and front-to-back — Metal Case/Metal Fronts 2-High30" YFLF230 b 106 12.3 $1022 $109836" YFLF236 b 116 14.5 $1128 $120442" YFLF242 b 136 16.8 $1236 $131239 1 ⁄2"H, three 12" drawers with hanging frames side-to-side and front-to-back — Metal Case/Metal Fronts 3-High30" YFLF330 b 137 16.0 $1382 $149236" YFLF336 b 156 18.8 $1540 $165042" YFLF342 b 182 21.9 $1699 $180951 1 ⁄2"H, four 12" drawers with hanging frames side-to-side and front-to-back — Metal Case/Metal Fronts 4-High30" YFLF430 b 189 21.0 $1834 $197736" YFLF436 b 206 24.9 $2066 $220942" YFLF442 b 240 28.8 $2293 $243667 5 ⁄8"H, 16" fixed shelf with hinged doors, and four 12" drawers with hanging frames side-to-side andfront-to-back — Metal Case/Metal Fronts 5-High1st Option:Pull:A Arch PullS Square PullI Integral Pull.Arch PullSquare Pull5th Option:Lock Color:Integral Pull30" YFLF530 b 225 26.6 $2427 $260436" YFLF536 b 242 30.5 $2521 $269842" YFLF542 b 287 36.4 $3008 $3185E4 BlackEL Matte SilverSystems Supplement – 3/2013 allsteeloffice.com | 321OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESLaterals• Four pull options:– Arch in Matte Silver or Black.– Integral in same color as case– Recessed in mirror chrome– Square in Matte Silver• All files are 18" deep.How to specify —Select theModel Numberfrom above.• For locking specifications, see pages 340-342.• Hanging frames and dividers installed on-site.• Laminate and veneer tops are available (seepage 327).• See page 325 for Lateral File Accessories.27 3 ⁄4"H, two 12" drawers with hanging frames side-to-side and front-to-back — 2-HighPersona Inset Lateral FilesExterior Ship Select PaintWidth Model Weight Cubes List Price List Price30" PLF230N b 106 11.8 $ 957 $103636" PLF236N b 116 13.9 $1063 $114242" PLF242N b 136 16.1 $1166 $124539 3 ⁄4"H, three 12" drawers with hanging frames side-to-side and front-to-back — 3-High30" PLF330N b 137 16.3 $1291 $140236" PLF336N b 156 19.4 $1446 $155742" PLF342N b 182 22.4 $1602 $171352 3 ⁄4"H, four 12" drawers with hanging frames side-to-side and front-to-back — 4-High30" PLF430N b 189 21.4 $1659 $180436" PLF436N b 206 25.3 $1867 $201242" PLF442N b 240 29.2 $2075 $2220NOTE: No posting shelf.30" PLF430P b 197 21.4 $1758 $190336" PLF436P b 206 25.3 $1974 $211942" PLF442P b 252 29.2 $2189 $2334NOTE: With posting shelf.1st Option:Pull:A ArchI IntegralR RecessedS Square2nd Option:Paint:See inside frontcover for finishes.3rd Option:Pull Color:Arch PullEL Matte SilverE4 BlackPLF . P . E .Example: PLF430PA.P27.E4.STDAArch PullGSA SIN 711-3For specification details, refer to the Workingwith Persona Lateral Files section in the SystemsSpecification Guide.NoteCounterweight kits are required forfreestanding lateral files (i.e., files that are notpositioned under a worksurface, ganged to anadjacent file or bolted to the floor or wall).See page 325.IIntegral Pull4th Option:Lock Type:STD Standard —Random KeyedOMT Omit Lock Core(Deduct $16)RRecessed PullSSquare Pull322 | Systems Supplement – 3/2013

Laterals• Refer to page 322 for specification details.Persona Inset Lateral FilesGSA SIN 711-3For specification details, refer to the Workingwith Persona Lateral Files section in the SystemsSpecification Guide.OVERHEADS & HUTCHESAArch PullIIntegral PullRRecessed PullSSquare PullHow to specify —Select theModel Numberfrom above.Exterior Ship Select PaintWidth Model Weight Cubes List Price List Price64 3 ⁄4"H, 12" roll-out shelf with receding door and three dividers top opening,balance 12" drawers with hanging frames side-to-side and front-to-back — 5-High30" PLF530N b 225 26.0 $1983 $216236" PLF536N b 242 30.7 $2243 $242242" PLF542N b 287 35.5 $2501 $2680NOTE: No posting shelf.30" PLF530P b 233 26.0 $2082 $226136" PLF536P b 248 30.7 $2349 $252842" PLF542P b 279 35.5 $2615 $2794NOTE: With posting shelf.64 3 ⁄4"H, 13" fixed shelf with receding door and three dividers top opening, balance 12" drawerswith hanging frames side-to-side and front-to-back — 5-High30" PLF530M b 369 26.0 $2018 $219736" PLF536M b 402 30.7 $2285 $246442" PLF542M b 453 35.5 $2548 $2727NOTE: No posting shelf.76 3 ⁄4"H, 12" fixed shelf with receding door and three dividers top opening, 12" roll-out shelf with receding door andthree dividers second opening, balance 12" drawers with hanging frames side-to-side and front-to-back; top openingwill be a fixed shelf — 6-High30" PLF630N b 255 30.5 $2519 $273136" PLF636N b 288 36.1 $2828 $304042" PLF642N b 334 41.7 $3141 $3353NOTE: No posting shelf.30" PLF630P b 271 30.5 $2619 $283136" PLF636P b 298 36.1 $2935 $314742" PLF642P b 301 41.7 $3255 $3467NOTE: With posting shelf.1st Option:Pull:A ArchI IntegralR RecessedS Square2nd Option:Paint:See inside frontcover for finishes.3rd Option:Pull Color:Arch PullEL Matte SilverE4 BlackPLF . P . E .Example: PLF530PA.P27.E4.STD4th Option:Lock Type:STD Standard —Random KeyedOMT Omit Lock Core(Deduct $16)Systems Supplement – 3/2013 allsteeloffice.com | 323REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESLaterals• Available in three pull options — Arch,Integral, and Beveled pull.• For locking specifications, see pages 340-342.• For Lateral File Accessories, see page 325.• All files are 18" deep.• Laminate and veneer tops are available, seepage 327.How to specify —Select theModel Numberfrom above.ELF27 1 ⁄4"H; two 12" drawers with hanging frames side-to-side — 2-High1st Option:Pull:A ArchI IntegralB Beveled.NoteExample: ELF230NB.P02.STDCounterweights are included andfactory installed as required.2nd Option:Paint:See inside frontcover for finishes.P .3rd Option:Pull Color:Arch Pull onlyEL Matte SilverE4 BlackAArch PullIIntegral PullBBeveled Pull324 | Systems Supplement – 3/2013.Essentials Lateral FilesFor specification details, refer to the Workingwith Essentials Laterals section in the SystemsSpecification Guide.Exterior Ship Select PaintWidth Model Weight Cubes List Price List Price30" ELF230N b 129 12.0 $ 743 $ 81636" ELF236N b 145 14.2 $ 821 $ 89442" ELF242N b 164 16.4 $ 951 $102428"H; two 12" drawers with hanging frames side-to-side — 2-High30" ELF830N b 138 12.3 $ 743 $ 81636" ELF836N b 156 14.5 $ 821 $ 89442" ELF842N b 177 16.8 $ 951 $1024NOTE: 28"H worksurface supporting laterals have a taller base plate resulting in a taller overall cabinet height.Consideration must be made to ensure that units align visually within the workstation.39 1 ⁄8"H; three 12" drawers with hanging frames side-to-side — 3-High30" ELF330N b 150 16.9 $ 973 $107636" ELF336N b 174 20.0 $1098 $120142" ELF342N b 197 23.2 $1267 $137052 1 ⁄2"H; four 12" drawers with hanging frames side-to-side — 4-High30" – No posting shelf ELF430N b 176 22.1 $1231 $136636" – No posting shelf ELF436N b 198 26.2 $1398 $153342" – No posting shelf ELF442N b 213 30.3 $1603 $173830" – With posting shelf ELF430P b 182 22.1 $1262 $139736" – With posting shelf ELF436P b 205 26.2 $1417 $155242" – With posting shelf ELF442P b 223 30.3 $1630 $176564 1 ⁄4"H; 12" roll-out shelf with receding door in the top opening,balance 12" drawers with hanging frames side-to-side — 5-High30" – No posting shelf ELF530N b 203 26.8 $1557 $172336" – No posting shelf ELF536N b 238 31.8 $1754 $192042" – No posting shelf ELF542N b 264 36.8 $2039 $220530" – With posting shelf ELF530P b 210 26.8 $1593 $175936" – With posting shelf ELF536P b 245 31.8 $1789 $195542" – With posting shelf ELF542P b 271 36.8 $2068 $22344th Option:Lock Option:STD Standard —Random KeyedOMT Omit Lock Core(Deduct $16)GSA SIN 711-3

LateralsALIGN AND PERSONA ACCESSORIESCounterweight kit(s)• Counterweight kit(s) required for Personafreestanding files:2- and 3-high files......................2 kits4-high files.................................1 kitCustom, 5- and 6-high files .......1 kit• Counterweight kit(s) required for Alignfreestanding files:2-high 30"W file....................................2 kits2-high 36"-42"W files...........................3 kits3-high and 4-high files (all widths) ........2 kits5-high files (all widths)............................1 kitALIGN & PERSONALFA-DIV12ESSENTIALSHow to specify —Select theModel Numberfrom above.Counterweight KitHanging Frames• Metal weight placed in bottom offreestanding files to inhibit tipping; fieldinstalled only.• Side-to-side hanging frame can be positionedto accommodate letter, A4 or legal sizedocuments. Black.• Front-to-back hanging frame can bepositioned to accommodate letter, A4, legal orEDP size documents. See SystemsSpecification Guide for complete filinginformation. Front-to-back hanging framemust be used with side-to-side hanging frame.• For 12" and 15"H interiors.Lateral File AccessoriesGSA SIN 711-3ESSENTIALS ACCESSORIES• All accessories are gray.• Model L919491 used for front-to-back filingof all paper sizes in all drawer sizes except -letter in a 42"W case.• Model L919492 for use in 42"W case forfront-to-back filing of letter paper size.ShipDescription Model Weight Cubes List PriceLFA-CW 30 0.1 $ 120 (Kit)DividersDivider for 12" high interiors; hangs on theback of the drawer or shelf; Infinite adjustmentsside-to-side; Black; 10 9 ⁄16"W x 6"H LFA-DIV12 5 S 0.5 $ 49 (set of 3)Side-to-side Hanging FramesFor 30" W File LFA-SS30 2 S 0.4 $ 29 (Pair)For 36" W File LFA-SS36 2 S 0.5 $ 30 (Pair)For 42" W File LFA-SS42 3 S 0.6 $ 35 (Pair)Front-to-back Hanging Frames (one pair per drawer required)LFA-FB 2 S 0.1 $ 36 (Pair)ShipListDescription Model Weight Cubes PriceSingle-Rail Hanging File Racks (4/pack) L919491 1 S 0.4 $ 34Double-Rail Hanging File Racks (2/pack) L919492 1.5 S 0.4 $ 34Dividers (3/pack) L919703 6 S 0.1 $ 35OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXExamples: LFA-CW LFA-SS30S Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 325

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESLaterals and Storage• Tops are field installed.• 60", 66" and 72" tops span two lateral files.• For use on 18 3 ⁄4" deep laterals.• Veneer Lateral File Tops by Gunlockefeaturing the ClearTech ® finish system.• Tops are 1 1 ⁄4" thick.• Stratwood veneer has a consistentstraight-grain pattern. Natural veneer willhave cathedrals with variations in grainpattern and tone.How to specify —Select theModel Numberfrom above.LTFF – .1st Option:Laminate or VeneerType and Finish:See inside frontcover for finishes.S prefix for StratawoodN prefix for NaturalExamples: LTFF-30.LT3B.E4• Tops are only compatible with metal storage.• When specifying with Align OpenCombination files and Bookcases order18 3 ⁄4"D tops below when placing unitsadjacent to lateral file storage and 18"D topson page 327 for freestanding applications..2nd Option:Edge:(on laminate tops only)See inside frontcover for finishes.E1 1 ⁄4"Veneer or Flat Edge DetailLTFFV-60V.NC511Lateral File Tops — 18 3 ⁄4" DeepStratawood Cleargrain VeneerGrain DirectionGSA SIN 711-3These tops will work with:Align Metal Case Personal Files, Lateral Files,Combination Files, and Bookcases.Recommended to complement:Any Veneer or Laminate Flat Edge WorksurfacesShip L1 L2 L3Width Depth Model Weight Cubes List Price List Price List PriceLaminate Tops – Flat Edge (for Align Metal Storage)30" 18 3 ⁄4" LTFF-30 20 S 1.6 $ 250 $ 264 $ 27636" 18 3 ⁄4" LTFF-36 25 S 1.8 $ 307 $ 324 $ 33942" 18 3 ⁄4" LTFF-42 30 S 2.1 $ 343 $ 361 $ 37960" 18 3 ⁄4" LTFF-60 42 3.0 $ 429 $ 452 $ 47466" 18 3 ⁄4" LTFF-66 48 3.2 $ 470 $ 495 $ 52172" 18 3 ⁄4" LTFF-72 55 3.5 $ 509 $ 536 $ 563NOTE: Add Suffix “S2” to 60"W-72"W model numbers to add 1 ⁄8" to nominal width of top to span 2 storage units —no upcharge.Veneer Veneer VeneerShip V1 V3 V5Width Depth Model Weight Cubes List Price List Price List PriceVeneer Lateral File Tops (for Align Metal Storage)30" 18 3 ⁄4" LTFFV-30V 20 1.6 $ 550 $ 603 $ 67136" 18 3 ⁄4" LTFFV-36V 25 1.8 $ 562 $ 616 $ 68642" 18 3 ⁄4" LTFFV-42V 30 2.1 $ 585 $ 643 $ 71560" 18 3 ⁄4" LTFFV-60V 42 3.0 $ 629 $ 690 $ 77066" 18 3 ⁄4" LTFFV-66V 48 3.2 $ 642 $ 705 $ 78672" 18 3 ⁄4" LTFFV-72V 55 3.5 $ 656 $ 720 $ 80084" 18 3 ⁄4" LTFFV-84V 63 4.0 $ 694 $ 761 $ 848NOTE: Add Suffix “S2” to 60"W-84"W model numbers to add 1 ⁄8" to nominal width of top to span 2 storage units —no upcharge.Shippable by small-package carrier.326 | Systems Supplement – 3/2013SNatural VeneerGrain Direction

Laterals and Shared Storage• Veneer Lateral File Tops by Gunlockefeaturing the ClearTech ® finish system.• Tops are 1 1 ⁄4" thick.• 60", 72" and 84" tops span two lateral files.• For use on 18" deep laterals, overfiles,bookcases and cabinets.• Stratawood veneer has a consistentstraight-grain pattern.• Natural veneer will have cathedrals and as anatural material is subject to nature’s qualitycontrol with variations in grain pattern andtone.How to specify —Select theModel Numberfrom above.AFNLFTP–1st Option:Surface Type:L LaminateW WoodExamples: AFNLFTP-6018L.TM20.EN• Tops are field installed.• 36"D tops are to be used for lateral filesplaced back-to-back.• When specifying with Align OpenCombinaton Files and Bookcases order18"tops below for freestanding applicationsand 18 3 ⁄4"tops on page 326 when placingunits adjacent to lateral file storage..1 1 ⁄4"Veneer or Flat Edge Detail2nd Option:Surface Finish:Laminate or Veneer.See inside frontcover for finishes.S prefix for StratawoodN prefix for NaturalAFNLFTP-3636W.CC215Systems Supplement – 3/2013 allsteeloffice.com | 327.Lateral File Tops — 18" or 36" Deep3rd Option:Edge Color:Laminate Tops only.See inside frontcover for finishes.EStratawood VeneerGrain DirectionSGSA SIN 711-3Natural VeneerGrain DirectionThese tops will work with:Align Metal Case Open Combination Files,Align Metal Bookcases, Essentials Laterals,Persona Inset Laterals, Persona Custom Laterals,Persona Hoteling LateralsRecommended to complement:Veneer or Flat Edge System WorksurfacesSurface Type Laminate Veneer Veneer Veneer(L–Laminate, L1 L2 L3 V1 V3 V5Width Depth Model W–Wood) List Price List Price List Price List Price List Price List PriceLateral File Top — Particle board construction with laminate and Flat Edge trim on all sides or veneer surfaceand veneer edge on all sides30" 18" AFNLFTP-3018 L or W $ 230 $ 241 $ 253 $ 576 $ 629 $ 70236" 18" AFNLFTP-3618 L or W $ 258 $ 270 $ 284 $ 593 $ 647 $ 72142" 18" AFNLFTP-4218 L or W $ 281 $ 295 $ 310 $ 615 $ 673 $ 75160" 18" AFNLFTP-6018 L or W $ 323 $ 339 $ 355 $ 663 $ 724 $ 80972" 18" AFNLFTP-7218 L or W $ 350 $ 367 $ 385 $ 689 $ 753 $ 84284" 18" AFNLFTP-8418 L or W $ 460 $ 483 $ 506 $ 732 $ 801 $ 89130" 36" AFNLFTP-3036 L or W $ 400 $ 420 $ 440 $ 858 $1041 $116136" 36" AFNLFTP-3636 L or W $ 452 $ 475 $ 497 $ 889 $1078 $120442" 36" AFNLFTP-4236 L or W $ 489 $ 514 $ 538 $ 974 $1183 $132060" 36" AFNLFTP-6036 L or W $ 564 $ 593 $ 620 $1017 $1233 $137872" 36" AFNLFTP-7236 L or W $ 608 $ 639 $ 668 $1059 $1286 $143584" 36" AFNLFTP-8436 L or W $ 800 $ 840 $ 880 $1099 $1334 $1489NOTE: Add Suffix “S2” to 60"W-84"W model numbers to add 1 ⁄8" to nominal width of top to span 2 storage units —no upcharge.Shippable by small-package carrier.OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESExtensions Extensions accessory line by Allsteel is designed tohelp you create your own space.• Create a unique spaceEach person is unique, no one person works exactly likeanother, and different tasks require different tools.Extensions work tools allow each person the ability tocreate a unique environment that is all their own. Lotsof paper to manage? Need active files within arm’sreach? Want to maximize your worksurface space?Need light somewhere other than below a cabinet?Whatever the task, we have the tools to accommodateyour workstyle.• Create a comfortable spaceWith a full line of organization, ergonomic andillumination tools, Extensions allow you to create acomfortable, ergonomic work area. Organization toolskeep important items visible and within your reach.Working with Extensions GSA Reference PageErgonomic tools help you stay comfortable whileworking. Illumination tools allow you to put your lightwhere it suits you.• Create an organized spaceTired of all the piles of paper building up on yourworksurface? Organization tools house your materialsand keep them in an orderly fashion. With acombination of hanging or freestanding organizationalaccessories, Extensions let you manage everything frombinders to paper clips.Allsteel’s Tool Tile and Rail attachments work in conjunction with a variety of accessories. Modular accessories freeup worksurface space and provide orderly storage that is well within reach. Units can be arranged and rearranged torespond to changing workflow. The work tools that attach to the Tool Tile and Rail applications are:• Mail Box• Clip Caddy• Folder Holder• Sidebar Personal Shelf• Phone Caddy• Paper Wave• Binder Bin• Gripper Clip• Tool Box Pencil and CD Holder• Multi-Media HangarAdditional accessories that work with the Tool Tile and Rail Work Tools aesthetically are:• Bookends• Catch Clip• Freestanding Mail BoxCoat Hooks, Marker Boards and Center Drawers round out the Organization offering.Terrace 13"H Tool Tile shown with the Binder Bin, the Paper Wave,two Folder Holders, and two Mail Boxes, .Tool rail, shown above, mount over tiles and are height-adjustable in 1"increments using slots in panels or metal hutch.Tool Rail shown with two Tool Box Pencil and CD Holders, two Mail Boxes,Folder Holder, and Phone Caddy.328 | Systems Supplement – 3/2013

OrganizationTerrace 3.4/2.6 Tool Tiles• Sturdy aluminum extrusion with steel supportconstruction.• Powder coated for durable finish.• Work Tools to be hung from this tile availableon pages 330 and 331.• Available as 13"H tiles for Terrace panels.• Use in place of a standard tile.• Similar attachment mechanism as tile.• Suggested weight capacity not to exceed 80lbs.• For use on Reach with Terrace 2.6 see page277 and Terrace 3.4 see page 281.How to specify —Select theModel Numberfrom above.Ship Core Paint Select PaintDescription Model Weight Cubes List Price List Price13"H Terrace 3.4 Tool Tiles — used to support paper management accessories24"W TT41324SW 10 S 0.4 $ 249 $ 28730"W TT41330SW 12 S 0.6 $ 264 $ 30236"W TT41336SW 14 S 0.6 $ 288 $ 32642"W TT41342SW 16 S 0.7 $ 308 $ 34648"W TT41348SW 19 S 0.7 $ 324 $ 36260"W TT41360SW 23 S 0.9 $ 343 $ 38113"H Terrace 2.6 Tool Tiles — used to support Extensions paper management accessories24"W TN41324SW 10 S 0.4 $ 242 $ 28030"W TN41330SW 12 S 0.6 $ 257 $ 29536"W TN41336SW 14 S 0.6 $ 280 $ 31842"W TN41342SW 16 S 0.7 $ 297 $ 33548"W TN41348SW 19 S 0.7 $ 314 $ 35260"W TN41360SW 23 S 0.9 $ 331 $ 3695"H Tool Rails — for Panels24"W EASR24 5 S 0.2 $ 138 $ 16430"W EASR30 6 S 0.3 $ 146 $ 17236"W EASR36 7 S 0.3 $ 153 $ 17942"W EASR42 8 S 0.4 $ 159 $ 18548"W EASR48 9 S 0.4 $ 163 $ 18960"W EASR60 11 S 0.5 $ 191 $ 2175"H Tool Rails — for Metal Hutches36"W EAHSR36 5 S 0.2 $ 153 $ 17942"W EAHSR42 6 S 0.3 $ 159 $ 18548"W EAHSR48 7 S 0.3 $ 163 $ 18960"W EAHSR60 8 S 0.4 $ 191 $ 21766"W EAHSR66 9 S 0.4 $ 199 $ 22572"W EAHSR72 11 S 0.5 $ 213 $ 239. P1st Option:Paint:See inside frontcover for finishes.Examples: TT41324SW.P02• Terrace 2.6 48"W and 60"W Tool Tilescannot be positioned at any panel locationwhere a power or pass-through harness ispositioned.• Consideration needs to be given to height oftools and location of worksurfaces. See notebelow.Tool Rail• For use with Terrace System and Reachstorage units.• 5" high rail (widths coordinate with panels).• Attachment via vertical reveals.EASR36.P7BTerrace ® 3.4/2.6 Tool Tiles / Tool RailsGSA SIN 711-1• Suggested weight capacity not to exceed 80lbs.• Can be hung from wall track.• Tool Rail is off-modular — can be used on apanel of equal width or one size smaller.• May span two panels of appropriate size, i.e.,60" on two 30" panels.Tool Rail for Hutches• Will work on Terrace System hutchesproduced after July 2, 2000. Plus, Align metalhutches.Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 329SOVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESOrganizationMail Box• Holds standard letter-size paper andinter-office envelopes.• Minimal horizontal intrusion.Folder Holder• Holds manilla envelopes.• Is capable of hanging on other folder holdersto maximize space.• Stores vertically for easy access to files.How to specify —Select theModel Numberfrom above.ShipSelect PaintDescription Model Weight Cubes List Price List PriceMail BoxA E 9"D x 15"W EAPT 2 S 0.3 $ 69 $ 81Folder HolderA E 9"H x 12"W EAFS 2 S 0.3 $ 71 $ 83Phone CaddyA E 9"W x 11"D EATS 2 S 0.3 $ 87 $ 99Binder BinA E 8 1 ⁄2"H x 5 1 ⁄4"W x 10"D EABS 2 S 0.8 $ 69 $ 81Tool Box Pencil and CD HolderA E 5"H x 5 1 ⁄4"W x 1 1 ⁄2"D EADH 1 S 0.2 $ 56 $ 68EA . P1st Option:Paint:See inside frontcover for finishes.Example: EAPT.P4JPhone Caddy• Holds telephone at optimum ergonomicangle.• Wire management cut-outs.• Accommodates standard phone sizes.Binder Bin• Holds folders, binders and manuals.A Available in Everyday Advantage. Check fabrics and finishes listings for A selections.E Available in Express Solutions. Check fabrics and finishes listings for E selections.Work ToolsGSA SIN 711-1Tool Box Pencil and CD Holder• Holds up to 3 CD jewel cases; holds pencilsand other writing utensils.Shippable by small-package carrier.330 | Systems Supplement – 3/2013S

OrganizationClip Caddy• Holds paper clips and other small objects.Sidebar Personal Shelf• Holds office supplies and personal effects.Paper Wave• Provides 3 fully divided slots for organizingfiles.• Keeps papers from “bowing” at bottom.Gripper Clip• Binds project papers together.• Mounts to Tool Rail or Tool Tile.Multi-Media Hangar• Holds 9 CDs or Zip disks.Work ToolsGSA SIN 711-1OVERHEADS & HUTCHESSelect theModel Numberfrom above.ShipSelect PaintDescription Model Weight Cubes List Price List PriceClip CaddyA E 2"H x 7"W x 3 1 ⁄2"D EAAC 1 S 0.2 $ 50 $ 62Sidebar Personal ShelfA E 2"H x 21"W x 7"D EAPS 3 S 0.5 $ 71 $ 83Paper WaveTray size: 2 1 ⁄2"H x 6"W x 10"DA E Dividers: 9 1 ⁄2"H x 9"W EASS 2 S 0.3 $ 97 $ 109EA . PGripper ClipPackage of 2 — 5"W x 2"H EAPC 1 S 0.2 $ 71 $ 83Multi-Media HangarE 10"H x 5 1 ⁄2"W x 3 1 ⁄2"D EAMH 2 S 0.5 $ 69 $ 81A Available in Everyday Advantage. Check fabrics and finishes listings for A selections.E Available in Express Solutions. Check fabrics and finishes listings for E selections.How to specify —1st Option:Paint:See inside frontcover for finishes.Example: EAPS.P4JShippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 331SREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESOrganizationBookends• Can be used on shelves or in cabinets.• Used to hold books, binders and catalogsupright.Freestanding Mail Box• Incorporates similar aesthetic to mountedMail Box.• Mounting brackets allow for free access fromfront and back.• Sold in pairs of two; will stack up to eighthigh.• Individual Mail Box dimension = 1 3 ⁄4"H.• Stacking brackets are black.Select theModel Numberfrom above.ShipSelect PaintDescription Model Weight Cubes List Price List PriceBookends (specify paint color)E Pair — 8"H x 6"W x 4"D EABE 3 S 0.4 $ 66 $ 78Freestanding Mail Box (specify paint color)E Pair — 4 7 ⁄8"H x 13 3 ⁄4"W x 9"D EAFT 4 S 0.3 $ 141 $ 153Catch ClipPackage of 6 EACC D1 S 0.1Coat Hooks (black only)E Package of six PMC6 1 S 0.2 $ 69 N/AMarker Board36"W x 24"H MRK36 15 S 3.2 $ 397 N/A42"W x 24"H MRK42 17 S 4.0 $ 431 N/A48"W x 24"H MRK48 19 S 4.6 $ 446 N/A. P1st Option:Paint:See inside frontcover for finishes.Catch Clip• Keeps important papers visible.• Package of 6 (3 Black, 3 Muslin).• Mounts with non-residue adhesive.Coat Hook (PMC6)• Hangs directly into slotted Concensys,Terrace or Align panel frame.• Package of six.• Available in black only.Marker Board• For use with dry marking pens.• Hangs directly on Concensys and Terracepanel frame.E Available in Express Solutions. Check fabrics and finishes listings for E selections.How to specify —Examples: EABE.P4J EACC.P27 PMC6.P MRK36Work ToolsGSA SIN 711-1• Brackets are installed for Concensysapplications. Brackets must be field re-locatedfor Terrace applications.• Does not replace 3.4 or 2.6 tile.• Porcelain-coated steel surface.• White with silver trim.• Width must correspond with width of panel.Marker Board Tile (Terrace)• Available as a standard tile option.• See page 65 for Terrace 3.4, and page 131 forTerrace 2.6 section.D Discontinued 8/29/2010Shippable by small-package carrier.332 | Systems Supplement – 3/2013SDD

OrganizationMetal Center Drawers• All metal center drawers feature pencil trayswith three compartments for storage.• Center drawers will not fit in center of 24"Dworksurfaces which are wider than 60".• For locking specifications, see pages 340-342.• Ball-bearing slide suspension.Center DrawersGSA SIN 711-1, 711-2, 711-11OVERHEADS & HUTCHESAngled frontAngled frontSelect theModel Numberfrom above.ShipSelect PaintDescription Model Weight Cubes List Price List PriceMetal Center Drawer w/LockE 19"W x 14 3 ⁄4"D x 3"H CSDC19 9 S 1.0 $ 148 $ 162• 12" drawer extension (3/4).• Inside drawer dimension: 19"W x 13"D x 2 3 ⁄8"H.• Minimum clearance for mounting: 21 3 ⁄4"W x 19 1 ⁄4"D.E 24 3 ⁄4"W x 14 3 ⁄4"D x 3"H CSDC25 9 S 1.0 $ 152 $ 166• 12" drawer extension (3/4).• Inside drawer dimension: 24 1 ⁄2"W x 13 1 ⁄2"D x 2 3 ⁄8"H.• Minimum clearance for mounting: 27 3 ⁄8"W x 19 1 ⁄4"D.E Available in Express Solutions. Check fabrics and finishes listings for E selections.How to specify —1st Option:Paint:See inside frontcover for finishes.. P .Example: CSDC19.P4J.STD2nd Option:Lock:STD Standard LockOMT Omit Lock Core(Deduct $16)Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 333SREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESErgonomicsCobra Keyboard and Mouse Platform(AKMK)• Surpasses ANSI/BIFMA standards.• Black powder-coat finish.• Lift and lock intuitive height adjustment.• Positive and negative tilt for the bestergonomic positioning: +10/–20 degrees.• Platform style keyboard support 19"W x11"D.How to specify —Select theModel Numberfrom above.AShipListDescription Model Weight Cubes PriceCobra Keyboard and Mouse Platform19"W x 11"D AKMK 17 S 1.6 $ 539Example: AKMK• Lubricated slide track system spring.• Platform rotation 360 degrees.• Tilt angle achieved using tilt wheel.• 12 1 ⁄2" Platform height adjustment. Liftplatform to raise, lift slightly and tilt back tolower.• Gel palm rest.• Circular mouse pad, swivel, tilt, LH/RHmounting, mouse catcher, gel rest.Keyboard PlatformsGSA SIN 711-1, 711-2, 711-11• Microsoft ® Natural ® compatible by removingpalm rest.• Required Mounting Clearance 19"W x 11"D.• Adjustable wrist rest.Shippable by small-package carrier.334 | Systems Supplement – 3/2013S

ErgonomicsMetal Corner Sleeves• 22 1 ⁄2"W leading edge x 18"D.• Corner sleeves connect intersectingworksurfaces to create “corner desk” workareas.• All corner sleeves have pre-drilled holes toallow attachment of articulating keyboardplatforms shown on page 334.CPU Hammock• Mounts to underside of worksurface.• Holds tower computers or desktop computersin vertical position.• Supports up to 85 lbs.• Height adjustable from 15" to 24" belowworksurface.• Width adjustable to accept units from3" to 9"W.• 16-gauge steel construction.Sleeves / Hammock / FootrestGSA SIN 711-1, 711-2, 711-11• Model ACPU2 holds units in fixed position.• Model ACPU3 features retractable suspensionsystem, same features as APCU2.Archie Footrest• 15° elevation.• Black only.• Soft, textured, rubberized, non-slip surface.• Designed for use on any floor surface.OVERHEADS & HUTCHESEdge DetailsModel AWCSACPU2Black onlyHow to specify —Select theModel Numberfrom above.AWC S .ACPU3ShipListDescription Model Weight Cubes PriceMetal Corner Sleeves — for use with Concensys, Terrace, Align Systems• Fits 1 1 ⁄4" thick square edge detail. AWCS 10 S 1.5 $ 80(T-Mold worksurfaces) 22 1 ⁄2"W leading edge x 18"D.CPU HammockFixed position ACPU2 7.5 S 0.5 $ 164Retractable suspension ACPU3 12 S 0.5 $ 237Archie FootrestBlack color 8048-200 D D 16 S 1.81"1st Option:Paint:See inside frontcover for finishes.P15 1 ⁄4"5"Example: AWCS.P4J ACPU2.P27 8048-200D D Discontinued 2/12/2012Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 335SD DREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESIlluminationAllsteel Extensions offers Illumination in fivestyles — Task Light, Down Light, Up Light, Ibis Light,and Spot Light.Task LightRecessed Task Lights conserve space and provide anefficient solution for illuminating the workplace. Allmodels are equipped with electronic ballast for longerbulb life and cooler operating temperature.Recessed Task Light Models mount under storagecabinets or shelves to provide optimal space utilization.Models are available in two styles and three sizes tocorrespond with the width of the cabinet or shelf. TaskLights with a fused plug are available to meet Chicagoelectrical code.Off-modular Down LightUse the low-profile Down Light in any area of yourworkstation — no overhead storage cabinet required!Until now, the location of office lighting has been dictatedby the location of the overhead cabinets and shelves. Nocabinet, no light. The Down Light provides the freedomto mount lighting to the panel system, not the overhead.This provides the user with maximum flexibility! You canmount the light up higher off your workstation forminimal worksurface intrusion or you can mount it justabove the worksurface for more concentrated light. TheDown Light also has off modular capabilities for evenmore flexibility and functionality. Mount on a panel ofequal width or smaller or span two smaller width panelswith one light. The choice is yours.Working with Illumination336 | Systems Supplement – 3/2013

IlluminationRecessed Task Lights• Recessed task lights are black with a 9' longblack cord that is attached to the right rearcorner of the fixture. (Color does not need tobe specified.)• Bulbs are included.• RECOMMENDATION: Provide a separatecircuit for task lights to ensure proper,long-term operation.• Includes 4 Cord Retainer clips.• Shorter width models can be used on wideroverheads, shelves and hutches.• All models are equipped with electronicballast for longer bulb life and cooleroperating temperature.WATT USAGEModel Number Watts870824 10870830 14870842 21870860 28Task LightingOpen MarketOVERHEADS & HUTCHESOpen MarketHow to specify —Select theModel Numberfrom above.ShipListDescription Model Weight Cubes PriceTask Lights (Black only) — Use recessed under overhead cabinets, storage shelves or hutches,comes with cord retainer clipsTask Light for 24"W 870824 3 S 0.2 $ 217Task Light for 30"W and 36"W 870830 4 S 0.3 $ 219Task Light for 42"W and 48"W 870842 6 S 0.5 $ 237Task Light for 60"W, 66"W and 72"W 870860 7 S 0.6 $ 256Task Lights (Black only) — With fused plug (satisfies Chicago electrical code)Task Light for 24"W 870824CH 3 S 0.2 $ 280Task Light for 30"W and 36"W 870830CH 4 S 0.3 $ 286Task Light for 42"W and 48"W 870842CH 6 S 0.5 $ 302Task Light for 60"W, 66"W and 72"W 870860CH 7 S 0.6 $ 320Cord Retainer Clips (Black only)Bag of 50 clips APACM2 1 S 0.1 $ 29.1st Option:Cord RetainerClip Color:Black only.P27Examples: 870824.X APACM2.P27 870824CH.XShippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 337SREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESIlluminationDown Light• Down Light and Up Light can be mounted toany panel of same width or smaller.• Sleek profile blends into background.• Capable of off-module mounting.• Down Light has linear prismatic lens whichminimizes glare.• 9' cord length; exits from bottom right side.Open MarketHow to specify —Select theModel Numberfrom above.ETLD .ShipSelect PaintDescription Model Weight Cubes List Price List PriceDown Light (panel-mounted task light)Off modular panel-mounted task lightfor 12" to 24" panels ETLD24 5 S 0.4 $ 504 $ 543Off modular panel-mounted task lightfor 18" to 36" panels ETLD36 7 S 0.6 $ 539 $ 578Off modular panel-mounted task lightfor 24" to 48" panels ETLD48 10 S 0.9 $ 577 $ 616Off modular panel-mounted task lightfor 30" to 60" panels ETLD60 12 S 1.1 $ 633 $ 672Off modular panel-mounted task lightfor 12" to 24" panels — Chicago code ETLD24CH 5 S 0.4 $ 571 $ 610Off modular panel-mounted task lightfor 18" to 36" panels — Chicago code ETLD36CH 7 S 0.6 $ 607 $ 646Off modular panel-mounted task lightfor 24" to 48" panels — Chicago code ETLD48CH 10 S 0.9 $ 647 $ 686Off modular panel-mounted task lightfor 30" to 60" panels — Chicago code ETLD60CH 12 S 1.1 $ 702 $ 741Up Light (panel-mounted ambient light)Ambient light for 24" panel ETLDA24 D 5 S 0.4Ambient light for 36" panel ETLDA36 D 7 S 0.6Ambient light for 48" panel ETLDA48 D 10 S 0.9Ambient light for 24" panel —Chicago code ETLDA24CH D 5 S 0.4Ambient light for 36" panel —Chicago code ETLDA36CH D 7 S 0.6Ambient light for 48" panel —Chicago code ETLDA48CH D 10 S 0.91st Option:Paint:See inside frontcover for finishes.PExample: ETLD48.P02• Electronic high power factor ballast increasesenergy efficiency.• Slim, energy efficient, fluorescent T5 bulb.NOTE: Down Light not to be used as a shelf ortransaction surface.Down and Up LightD Discontinued 8/29/2010Shippable by small-package carrier.338 | Systems Supplement – 3/2013SDDDDDDOpen MarketDDDDDD

IlluminationPanel Hung/Freestanding Task Lights• 13 watt compact fluorescent bulb.• Detachable plug in ballast.• Four adjustment points.• 27" of horizontal reach.• Available in Black only.Spot Light• Magnetic ballast; 18 watt.• Compact design works in many applications,including small work areas.• 9' cord, exits from back of light.• Prismatic acrylic lens diffuses light acrosswork area.• ABS recyclable plastic housing.• Lightweight (less than 3 lbs.) facilitatescreative mounting options.Ibis and Spot LightsOpen Market• Available in black only.• Will not erase disc info when applied tooverheads.OVERHEADS & HUTCHES8283I8284IOpen MarketHow to specify —Select theModel Numberfrom above..ShipListDescription Model Weight Cubes PricePanel Hung/Freestanding Task LightsPanel Hung Task Light 8283I D D5 S 1.4Freestanding Task Light w/base 8284I D D13 S 1.4Spot Light (magnetic task light)Magnetic task light (18 watt magnetic ballast)10"W x 10"D x 2"H ESLM D5 S 0.41st Option:Paint:Black only.PExamples: 8283I.PESLM.P27D D Discontinued 2/12/2012D Discontinued 3/7/2010Shippable by small-package carrier.Systems Supplement – 3/2013 allsteeloffice.com | 339SD DD DDREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEX

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESAppendixLaterals, Pedestals and StorageStandard Options• Random Keying — The factory will assign key(s) arbitrarilyusing key numbers from chart below.• Omit Lock Core — The factory will omit lock cores.Removable lock core kits with specific key number must beordered to facilitate keying alike in the field.Vertical FilesStandard Options• Random Keying — The factory will assign key(s) arbitrarily(see below chart for key numbers).Key Alike Process• Order standard product which will be shipped with factoryinstalled locks and random numbered cores.• Order the appropriate quantity of like numbered coresrequired for each workstation or keyed area.• Simply replace the factory installed core with the replacementcores after product has been installed.Locking SpecificationsGSA Reference PageReplacing Lock Cores• Lock must be in the unlocked position.• Insert core removal key and pull core straight out.(Reach units require rotating key 90° clockwise pastunlocked position.)• Insert new core with core removable key, hold core intolock and withdraw core removal key.• Retain original core for future use.• On Persona Pedestals, open top drawer and hold lock barsin unlocked position before removal of core.RemovableRandom Omit Key Lock Core MasterKeying Lock Core Numbers Kit KeyAlign Laterals X X 101E-225E LKF23C* MKF22Persona Laterals (including Custom) X X 101E-225E LKF23C MKF22Persona Hoteling Laterals X X 101E-225E LKF23C MKF22Essentials Laterals X X 101E-225E LKF23C MKF22Classic Laterals X X 101E-225E LKF23C MKF22Persona Overfile Cabinets X X 101E-225E LKF23C MKF22Align Storage/Combination Files X X 101E-225E LKF23C* MKF22Persona Combination Files X X 101E-225E LKF23C MKF22Persona Storage/Combination Cabinets X X 101E-225E LKF23C MKF22Align Personal Tower and Files X X 101E-225E LKF23C* MKF22Essentials Personal Tower and Files X X 101E-225E LKF23C MKF22Align Pedestals X X 101E-225E LKF23C* MKF22Persona Pedestals*** X X 101E-225E LKF23C MKF22Essentials Pedestals X X 101E-225E LKF23C MKF22A980/A990/A940 Vertical Files X 101E-225E LKF23C MKF22Align Overheads X X 101E-225E LKF23C* MKF22Essentials Overheads (Flipper Door) X X 101E-225E LKF23C MKF22Persona Overheads (Receding Door) X X 101N-225N LKF23CN MF22Persona Radius Overheads X X 101E-225E LKF23C MKF22Align Hutches X X 101E-225E LKF23C* MKF22Persona Hutches X X 101E-225E LKF23C MKF22Essentials Hutches X X 101E-225E LKF23C MKF22Reach Storage Units*** X 101E-225E LKF23C MKF22Center Drawer (CSDC19/25) X X 101E-225E LKF23C MKF22*LKF23C is chrome. Optional black core for wood casegoods is LKF23CE4.**LKF25EL is Matte Silver. Optional black core is LKF25E4.***Persona Pedestals and Reach Storage units will transition to lock core LKF23C in 3Q 2009. Contact Allsteel Customer Supportat time of order for confirmation.340 | Systems Supplement – 3/2013

AppendixLocking SpecificationsGSA SIN 711-1, 711-3OVERHEADS & HUTCHESShip Freight ListDescription Model Weight Cubes Class PriceBrushed Chrome Removable Lock Core KitKey Numbers 101E-225EUsed on metal and painted wood casegoods productproduced after 2/3/97; A980, A990, and A940 Series VerticalFiles; and Reach Storage Units produced after 3Q 2009.Includes one core, two keys, one core removal tool,adapter and instructions LKF23C 0.1 S 0.1 70 $ 16Black used on veneer casegoods product.Includes one core, two keys, one core removal tool,adapter and instructions LKF23CE4 0.1 S 0.1 70 $ 16NOTE: Core matches manufactured lock on metal casegoods product but can be used with veneer and laminateproduct.Master Key(One key)Available to authorized dealers only on faxed orders.Will open LKF23C, LKF23CE4, LKF24, LKF25EL, and LKF25E4locks numbered 101E-225E. MKF22 0.1 S 0.1 70 $ 13HOW TO ORDER:NOTE: Numbers 101E-225E are available. Orders without numbers specified will be keyed at random.SAMPLE ORDER:Quantity Model Color6 LKF23C X121E1 MKF22 XBrushed Chrome Removable Lock Core Kit*Key Numbers 101N-225NIncludes one core, two keys,one core removal tool, adapter and instructions LKF23CN 0.1 S 0.1 70 $ 16Master Key*(One key)Available to authorized dealers only on faxed orders.Will open LKF23CN locks numbered 101N-225N. MF22 0.1 S 0.1 70 $ 13*On existing Premium and Asset Lateral, use N-Series locks.SShippable by small-package carrier.REACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 341

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESAppendixEASY LOCK PROGRAMThe Allsteel Easy Lock Program simplifies the lock-core orderingprocess when multiple cores are being specified. The Easy Lock corescan be used with Allsteel storage that currently uses the LKF23C cores(all storage except Receding Door Overheads).To ensure ease of ordering in different situations the Easy Lock corescan be specified in three different ways — Random, Specified orSequential.Random KeyingThe Random Keying option is provided for instances where there aremultiple orders or phases to a project and the offices need to be keyedalike but the key numbering is not required. With the random keyingoption key numbers are not specified, however, the core kits will be insequential order from a random starting point.Example: There are 15 offices which each have 5 black locks that needto be keyed alike, but the actual key numbers are not important.This order would look like: 15 LKFE5BLK.XThis specifies that 15 5-core kits are needed in black with randomkey numbers.Specified KeyingThe Specified Keying option is provided for the instances where thereis a specific key number desired for all of the cores ordered.Example: There are 10 offices which each have 2 silver locks that needto be keyed-alike with key number 202.This order would look like: 10 LKFE2SLV.X202This specifies that 10 2-core kits are needed in silver with keynumber 202.Sequential KeyingAllsteel Sequential Keying option is provided for the instances whenthere are multiple orders or phases to a project and it is imperative thatkey numbers are not duplicated.Example: A multiple phase project has 60 total offices — 40 offices inPhase I, and 20 offices in Phase II. The project manager has expresseda need to have keyed-alike offices but doesn't want any of the officesto use the same key numbers.The first 40 offices have 4 silver locks each that need to be keyed-alike.This order would look like: 40 LKFE4SLV.SEQ/101This specifies that 40 4-core kits are needed in silver and the startingnumber is 101.The second set of 20 offices only have 3 silver locks each that need tobe keyed-alike; and it is important which key number starts off thesequence to ensure that no key number is duplicated. It is known thatthe first key range was key numbers 101-140.The second order would look like: 20 LKFE3SLV.SEQ/141This specifies that 20 3-core kits are needed in silver and keysequence has to start at key number 141.HOW TO ORDER:NOTE: Numbers 101-225 are available. Orders without keynumbers specified will be keyed at random.SAMPLE ORDER FOR EXAMPLES GIVEN:Quantity Model Key Type15 LKFE5BLK. X10 LKFE2SLV. X20240 LKFE4SLV. SEQ/10120 LKFE3SLV. SEQ/141Locking SpecificationsGSA SIN 711-1, 711-3ShipListDescription Model Weight Cubes PriceEasy Lock Lock-CoreLock Core Kit Silver — 1 core, 2 keys LKFE1SLV 0.2 0.1 $ 17Lock Core Kit Black — 1 core, 2 keys LKFE1BLK 0.2 0.1 $ 17Lock Core Kit Silver — 2 cores, 2 keys LKFE2SLV 0.4 0.2 $ 34Lock Core Kit Black — 2 cores, 2 keys LKFE2BLK 0.4 0.2 $ 34Lock Core Kit Silver — 3 cores, 2 keys LKFE3SLV 0.6 0.3 $ 51Lock Core Kit Black — 3 cores, 2 keys LKFE3BLK 0.6 0.3 $ 51Lock Core Kit Sliver — 4 cores, 2 keys LKFE4SLV 0.8 0.4 $ 68Lock Core Kit Black — 4 cores, 2 keys LKFE4BLK 0.8 0.4 $ 68Lock Core Kit Silver — 5 cores, 2 keys LKFE5SLV 1.0 0.5 $ 85Lock Core Kit Black — 5 cores, 2 keys LKFE5BLK 1.0 0.5 $ 85Lock Core Kit Silver — 6 cores, 2 keys LKFE6SLV 1.2 0.6 $ 102Lock Core Kit Black — 6 cores, 2 keys LKFE6BLK 1.2 0.6 $ 102Lock Core Kit Silver — 7 cores, 2 keys LKFE7SLV 1.4 0.7 $ 119Lock Core Kit Black — 7 cores, 2 keys LKFE7BLK 1.4 0.7 $ 119Lock Core Kit Silver — 8 cores, 2 keys LKFE8SLV 1.6 0.8 $ 136Lock Core Kit Black — 8 cores, 2 keys LKFE8BLK 1.6 0.8 $ 136Master Key(One key) Available to authorizeddealers only on faxed orders. MKF22 0.1 0.1 $ 13NOTE: One core removal key minimum per order. One additional core removalkey per 25 lock-cores will be shipped.See pages 340-341 for additional lock core ordering information.How to Specify:Step 1 — Count the number of lock cores and color required in eachworkstation that need to be keyed alike.Step 2 — Count the total number of workstations needing 4 lock-cores.2312 overheads with 1 lock-core each = 22 pedestals with 1 lock-core each = 2Total silver lock-cores per station = 444 total workstationsStep 3 — Specify model number based on total number of lock-cores in astation and quantity of kits based on number of workstations.4 L K F E 4 S LV. XColor of CoreNumber of workstationsLock-Cores per station342 | Systems Supplement – 3/2013

AppendixModel Grade Grade GradeNumber Description 7 8 9Terrace 3.4 Tackable Acoustical Tiles — See page 57TT41320T 13"H x 20"W Acoustical Tile $ 183 $ 201 $ 216TT41324T 13"H x 24"W Acoustical Tile $ 188 $ 205 $ 221TT41330T 13"H x 30"W Acoustical Tile $ 224 $ 243 $ 263TT41336T 13"H x 36"W Acoustical Tile $ 245 $ 268 $ 289TT41342T 13"H x 42"W Acoustical Tile $ 251 $ 276 $ 302TT41348T 13"H x 48"W Acoustical Tile $ 268 $ 297 $ 328TT41360T 13"H x 60"W Acoustical Tile $ 280 $ 313 $ 345TT42620T 26"H x 20"W Acoustical Tile $ 297 $ 321 $ 347TT42624T 26"H x 24"W Acoustical Tile $ 267 $ 293 $ 318TT42630T 26"H x 30"W Acoustical Tile $ 306 $ 335 $ 365TT42636T 26"H x 36"W Acoustical Tile $ 362 $ 394 $ 424TT42642T 26"H x 42"W Acoustical Tile $ 395 $ 430 $ 466TT42648T 26"H x 48"W Acoustical Tile $ 408 $ 445 $ 483TT42660T 26"H x 60"W Acoustical Tile $ 424 $ 463 $ 505TT43920T 39"H x 20"W Acoustical Tile $ 340 $ 382 $ 420TT43924T 39"H x 24"W Acoustical Tile $ 344 $ 386 $ 426TT43930T 39"H x 30"W Acoustical Tile $ 400 $ 443 $ 487TT43936T 39"H x 36"W Acoustical Tile $ 482 $ 531 $ 579TT43942T 39"H x 42"W Acoustical Tile $ 526 $ 577 $ 627TT43948T 39"H x 48"W Acoustical Tile $ 551 $ 603 $ 661Terrace 3.4 Tackable Super Acoustical Tiles — See page 58TT41324A 13"H x 24"WSuper Acoustical Tile $ 228 $ 245 $ 261TT41330A 13"H x 30"WSuper Acoustical Tile $ 266 $ 285 $ 305TT41336A 13"H x 36"WSuper Acoustical Tile $ 291 $ 314 $ 335TT41342A 13"H x 42"WSuper Acoustical Tile $ 306 $ 331 $ 357TT41348A 13"H x 48"WSuper Acoustical Tile $ 324 $ 353 $ 384TT41360A 13"H x 60"WSuper Acoustical Tile $ 337 $ 370 $ 402TT42624A 26"H x 24"WSuper Acoustical Tile $ 322 $ 348 $ 373TT42630A 26"H x 30"WSuper Acoustical Tile $ 362 $ 391 $ 421TT42636A 26"H x 36"WSuper Acoustical Tile $ 434 $ 466 $ 496TT42642A 26"H x 42"WSuper Acoustical Tile $ 467 $ 502 $ 538TT42648A 26"H x 48"WSuper Acoustical Tile $ 485 $ 522 $ 560TT42660A 26"H x 60"WSuper Acoustical Tile $ 508 $ 547 $ 589TT43924A 39"H x 24"WSuper Acoustical Tile $ 410 $ 452 $ 492TT43930A 39"H x 30"WSuper Acoustical Tile $ 472 $ 515 $ 559TT43936A 39"H x 36"WSuper Acoustical Tile $ 570 $ 619 $ 667TT43942A 39"H x 42"WSuper Acoustical Tile $ 624 $ 675 $ 725TT43948A 39"H x 48"WSuper Acoustical Tile $ 653 $ 705 $ 763Fabric Grades 7, 8, and 9 Pricing by Model NumberGSA Reference PageModel Grade Grade GradeNumber Description 7 8 9Terrace 3.4 Data/Electrical Ported Tiles — See page 59TT41324E 13"H x 24"W Port Tile $ 266 $ 283 $ 299TT41330E 13"H x 30"W Port Tile $ 300 $ 319 $ 339TT41336E 13"H x 36"W Port Tile $ 321 $ 344 $ 365TT41342E 13"H x 42"W Port Tile $ 329 $ 354 $ 380TT41348E 13"H x 48"W Port Tile $ 344 $ 373 $ 404TT41360E 13"H x 60"W Port Tile $ 356 $ 389 $ 421Terrace 3.4 Monolithic Tackable Acoustical Tiles — See page 60TT94320T 43"H x 20"W Acoustical Tile $ 395 $ 434 $ 475TT94324T 43"H x 24"W Acoustical Tile $ 402 $ 442 $ 482TT94330T 43"H x 30"W Acoustical Tile $ 412 $ 451 $ 493TT94336T 43"H x 36"W Acoustical Tile $ 501 $ 542 $ 584TT94342T 43"H x 42"W Acoustical Tile $ 552 $ 593 $ 634TT94348T 43"H x 48"W Acoustical Tile $ 586 $ 628 $ 669TT94360T 43"H x 60"W Acoustical Tile $ 649 $ 691 $ 729TT95620T 56"H x 20"W Acoustical Tile $ 480 $ 528 $ 577TT95624T 56"H x 24"W Acoustical Tile $ 488 $ 537 $ 586TT95630T 56"H x 30"W Acoustical Tile $ 518 $ 570 $ 622TT95636T 56"H x 36"W Acoustical Tile $ 611 $ 667 $ 722TT95642T 56"H x 42"W Acoustical Tile $ 657 $ 715 $ 773TT95648T 56"H x 48"W Acoustical Tile $ 676 $ 738 $ 802TT95660T 56"H x 60"W Acoustical Tile $ 733 $ 798 $ 864TT96920T 69"H x 20"W Acoustical Tile $ 635 $ 689 $ 747TT96924T 69"H x 24"W Acoustical Tile $ 645 $ 701 $ 759TT96930T 69"H x 30"W Acoustical Tile $ 695 $ 756 $ 816TT96936T 69"H x 36"W Acoustical Tile $ 805 $ 869 $ 933TT96942T 69"H x 42"W Acoustical Tile $ 872 $ 940 $1008TT96948T 69"H x 48"W Acoustical Tile $ 903 $ 975 $1044TT96960T 69"H x 60"W Acoustical Tile $ 976 $1053 $1127Terrace 3.4 Data/Electrical Ported Tiles — See page 61TT94324E 43"H x 24"W Port Tile $ 473 $ 513 $ 553TT94330E 43"H x 30"W Port Tile $ 489 $ 528 $ 570TT94336E 43"H x 36"W Port Tile $ 576 $ 617 $ 659TT94342E 43"H x 42"W Port Tile $ 629 $ 670 $ 711TT94348E 43"H x 48"W Port Tile $ 664 $ 706 $ 747TT94360E 43"H x 60"W Port Tile $ 726 $ 768 $ 806TT95624E 56"H x 24"W Port Tile $ 559 $ 608 $ 657TT95630E 56"H x 30"W Port Tile $ 593 $ 645 $ 697TT95636E 56"H x 36"W Port Tile $ 689 $ 745 $ 800TT95642E 56"H x 42"W Port Tile $ 734 $ 792 $ 850TT95648E 56"H x 48"W Port Tile $ 754 $ 816 $ 880TT95660E 56"H x 60"W Port Tile $ 811 $ 876 $ 942TT96924E 69"H x 24"W Port Tile $ 712 $ 768 $ 826TT96930E 69"H x 30"W Port Tile $ 774 $ 835 $ 895TT96936E 69"H x 36"W Port Tile $ 884 $ 948 $1012TT96942E 69"H x 42"W Port Tile $ 949 $1017 $1085TT96948E 69"H x 48"W Port Tile $ 980 $1052 $1121TT96960E 69"H x 60"W Port Tile $ 1052 $1129 $1203OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 343

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESAppendixModel Grade Grade GradeNumber Description 7 8 9Terrace 2.6 Monolithic Tiles — See page 118TN94320T 43"Hx20"W Acoustical Tile $ 339 $ 379 $ 419TN94324T 43"Hx24"W Acoustical Tile $ 339 $ 379 $ 419TN94330T 43"Hx30"W Acoustical Tile $ 356 $ 398 $ 442TN94336T 43"Hx36"W Acoustical Tile $ 433 $ 480 $ 526TN94342T 43"Hx42"W Acoustical Tile $ 481 $ 533 $ 583TN94348T 43"Hx48"W Acoustical Tile $ 512 $ 564 $ 617TN94360T 43"Hx60"W Acoustical Tile $ 574 $ 630 $ 686TN95620T 56"Hx20"W Acoustical Tile $ 411 $ 459 $ 505TN95624T 56"Hx24"W Acoustical Tile $ 411 $ 459 $ 505TN95630T 56"Hx30"W Acoustical Tile $ 445 $ 494 $ 546TN95636T 56"Hx36"W Acoustical Tile $ 522 $ 577 $ 632TN95642T 56"Hx42"W Acoustical Tile $ 566 $ 621 $ 680TN95648T 56"Hx48"W Acoustical Tile $ 582 $ 639 $ 702TN95660T 56"Hx60"W Acoustical Tile $ 632 $ 695 $ 760TN96920T 69"Hx20"W Acoustical Tile $ 485 $ 535 $ 585TN96924T 69"Hx24"W Acoustical Tile $ 548 $ 604 $ 660TN96930T 69"Hx30"W Acoustical Tile $ 595 $ 655 $ 713TN96936T 69"Hx36"W Acoustical Tile $ 693 $ 755 $ 816TN96942T 69"Hx42"W Acoustical Tile $ 749 $ 814 $ 879TN96948T 69"Hx48"W Acoustical Tile $ 771 $ 838 $ 909TN96960T 69"Hx60"W Acoustical Tile $ 838 $ 909 $ 980Terrace 2.6 Data/Electrical Ported Tiles — See page 119TN94324E 43"Hx24"W Port Tile $ 409 $ 449 $ 489TN94330E 43"Hx30"W Port Tile $ 426 $ 468 $ 512TN94336E 43"Hx36"W Port Tile $ 505 $ 552 $ 598TN94342E 43"Hx42"W Port Tile $ 551 $ 603 $ 653TN94348E 43"Hx48"W Port Tile $ 584 $ 636 $ 689TN94360E 43"Hx60"W Port Tile $ 657 $ 698 $ 754TN95624E 56"Hx24"W Port Tile $ 482 $ 530 $ 576TN95630E 56"Hx30"W Port Tile $ 514 $ 563 $ 615TN95636E 56"Hx36"W Port Tile $ 593 $ 648 $ 703TN95642E 56"Hx42"W Port Tile $ 634 $ 689 $ 748TN95648E 56"Hx48"W Port Tile $ 653 $ 710 $ 773TN95660E 56"Hx60"W Port Tile $ 700 $ 763 $ 828TN96924E 69"Hx24"W Port Tile $ 618 $ 674 $ 730TN96930E 69"Hx30"W Port Tile $ 664 $ 724 $ 782TN96936E 69"Hx36"W Port Tile $ 763 $ 825 $ 886TN96942E 69"Hx42"W Port Tile $ 820 $ 885 $ 950TN96948E 69"Hx48"W Port Tile $ 844 $ 911 $ 982TN96960E 69"Hx60"W Port Tile $ 908 $ 979 $1050Fabric Grades 7, 8, and 9 Pricing by Model NumberGSA Reference PageModel Grade Grade GradeNumber Description 7 8 9Terrace 2.6 Tackable Acoustical Tiles — See page 120TN41320T 13"Hx20"W Acoustical Tile $ 159 $ 173 $ 193TN41324T 13"Hx24"W Acoustical Tile $ 159 $ 173 $ 193TN41330T 13"Hx30"W Acoustical Tile $ 173 $ 192 $ 210TN41336T 13"Hx36"W Acoustical Tile $ 197 $ 217 $ 241TN41342T 13"Hx42"W Acoustical Tile $ 215 $ 239 $ 265TN41348T 13"Hx48"W Acoustical Tile $ 231 $ 260 $ 290TN41360T 13"Hx60"W Acoustical Tile $ 238 $ 271 $ 301TN42620T 26"Hx20"W Acoustical Tile $ 227 $ 253 $ 275TN42624T 26"Hx24"W Acoustical Tile $ 227 $ 253 $ 275TN42630T 26"Hx30"W Acoustical Tile $ 261 $ 289 $ 314TN42636T 26"Hx36"W Acoustical Tile $ 310 $ 339 $ 369TN42642T 26"Hx42"W Acoustical Tile $ 338 $ 372 $ 404TN42648T 26"Hx48"W Acoustical Tile $ 346 $ 382 $ 419TN42660T 26"Hx60"W Acoustical Tile $ 359 $ 400 $ 439TN43020T 30"Hx20"W Acoustical Tile $ 235 $ 266 $ 299TN43024T 30"Hx24"W Acoustical Tile $ 235 $ 266 $ 299TN43030T 30"Hx30"W Acoustical Tile $ 276 $ 320 $ 364TN43036T 30"Hx36"W Acoustical Tile $ 324 $ 371 $ 418TN43042T 30"Hx42"W Acoustical Tile $ 354 $ 403 $ 452TN43048T 30"Hx48"W Acoustical Tile $ 364 $ 415 $ 468TN43060T 30"Hx60"W Acoustical Tile $ 376 $ 431 $ 488TN43936T 39"Hx36"W Acoustical Tile $ D $ D $TN43942T 39"Hx42"W Acoustical Tile $ D $ D $TN43948T 39"Hx48"W Acoustical Tile $ D $ D $Terrace 2.6 Data/Electrical Ported Tiles — See page 121TN41324E 13"Hx24"W Port Tile $ 233 $ 247 $ 267TN41330E 13"Hx30"W Port Tile $ 248 $ 267 $ 285TN41336E 13"Hx36"W Port Tile $ 274 $ 294 $ 318TN41342E 13"Hx42"W Port Tile $ 290 $ 314 $ 340TN41348E 13"Hx48"W Port Tile $ 306 $ 335 $ 365TN41360E 13"Hx60"W Port Tile $ 313 $ 346 $ 376TN42636E 26"Hx36"W Port Tile $ D $ D $TN42642E 26"Hx42"W Port Tile $ D $ D $TN42648E 26"Hx48"W Port Tile $ D $ D $DDDDDD344 | Systems Supplement – 3/2013

AppendixModel Grade Grade GradeNumber Description 7 8 9Tackboards for Align Metal Case Hutches – See page 221 – Select add $19YTB2436 36"W Tackboard $ 629 $ 690 $ 758YTB2442 42"W Tackboard $ 662 $ 728 $ 798YTB2448 48"W Tackboard $ 717 $ 790 $ 864YTB2460 60"W Tackboard $ 802 $ 882 $ 971YTB2466 66"W Tackboard $1000 $1099 $1208YTB2472 72"W Tackboard $1178 $1297 $1427Fabric Grades 7-9 and O-Z Pricing by Model NumberGSA Reference PageCore Paint Select PaintModel Grades GradesNumber Description 7/8/9 7/8/9Terrace Persona Overhead Cabinets (Arch Pulls) — See page 211TP24RNAF 24"W Persona Overhead w/Fabric Door $ 1157 $ 1214TP30RNAF 30"W Persona Overhead w/Fabric Door $ 1164 $ 1271TP36RNAF 36"W Persona Overhead w/Fabric Door $ 1193 $ 1250TP42RNAF 42"W Persona Overhead w/Fabric Door $ 1216 $ 1273TP48RNAF 48"W Persona Overhead w/Fabric Door $ 1241 $ 1298TP60RNAF 60"W Persona Overhead w/Fabric Doors $ 2031 $ 2088Terrace Persona Overhead Cabinets (No Pulls) — See page 211TP24RNNF 24"W Persona Overhead w/Fabric Door $ 1128 $ 1185TP30RNNF 30"W Persona Overhead w/Fabric Door $ 1135 $ 1192TP36RNNF 36"W Persona Overhead w/Fabric Door $ 1164 $ 1221TP42RNNF 42"W Persona Overhead w/Fabric Door $ 1187 $ 1244TP48RNNF 48"W Persona Overhead w/Fabric Door $ 1212 $ 1269TP60RNNF 60"W Persona Overhead w/Fabric Doors $ 1973 $ 2030Terrace Persona Overhead w/Easy Assist (Arch Pulls) — See page 211TP24REAF 24"W Persona Overhead w/EA Fabric Door $ 1336 $ 1393TP30REAF 30"W Persona Overhead w/EA Fabric Door $ 1343 $ 1400TP36REAF 36"W Persona Overhead w/EA Fabric Door $ 1372 $ 1429TP42REAF 42"W Persona Overhead w/EA Fabric Door $ 1395 $ 1452TP48REAF 48"W Persona Overhead w/EA Fabric Door $ 1420 $ 1477Terrace Persona Overhead w/Easy Assist (No Pulls) — See page 211TP24RENF 24"W Persona Overhead w/EA Fabric Door $ 1307 $ 1364TP30RENF 30"W Persona Overhead w/EA Fabric Door $ 1314 $ 1371TP36RENF 36"W Persona Overhead w/EA Fabric Door $ 1343 $ 1400TP42RENF 42"W Persona Overhead w/EA Fabric Door $ 1366 $ 1423TP48RENF 48"W Persona Overhead w/EA Fabric Door $ 1391 $ 1448Fabric Tackboard for 36 1 ⁄4"H Hutch — See page 218862036 36"W 20"H Tackboard for Hutch $ 584 $ 601862042 42"W 20"H Tackboard for Hutch $ 615 $ 632862048 48"W 20"H Tackboard for Hutch $ 667 $ 684862060 60"W 20"H Tackboard for Hutch $ 748 $ 765862066 66"W 20"H Tackboard for Hutch $ 1024 $ 1041862072 72"W 20"H Tackboard for Hutch $ 1166 $ 1183Model Grade Grade Grade Grade Grade Grade Grade Grade Grade Grade Grade GradeNumber O P Q R S T U V W X Y ZAlign, Persona, and Essentials Pedestal Seat Cushion Tops — See Pages 314 and 319ASPT-24SC23 3 ⁄8"D $ 323 $ 343 $ 362 $ 384 $ 404 $ 425 $ 443 $ 466 $ 484 $ 506 $ 525 $ 560ASPT-24SCFC23 3 ⁄8"D $ 412 $ 432 $ 451 $ 473 $ 493 $ 514 $ 532 $ 555 $ 573 $ 595 $ 614 $ 649ASPT-30SC29 3 ⁄8"D $ 380 $ 400 $ 419 $ 441 $ 461 $ 482 $ 500 $ 523 $ 541 $ 563 $ 582 $ 617ASPT-30SCFC29 3 ⁄8"D $ 468 $ 488 $ 507 $ 529 $ 549 $ 570 $ 588 $ 611 $ 629 $ 651 $ 670 $ 705OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 345

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESCross Reference IndexModel Page Model Page Model Page Model Page2-8CIR24 .............................1552-8CIR30 .............................1552-8CIR36 .............................1552-8CIR42 .............................1552-8CIR48 .............................1552-8CIR60 .............................1552080-000..............................3152084-000..............................3152085-000..............................3152280-000......................315, 3192281-000..............................3152282-300......................315, 3192282-400......................315, 3192285-000..............................3158030-000..............................2128032-300..............................2128032-360..............................2128032-420..............................2128032-480..............................2128048-200..............................3358283I............................224, 3398284I............................224, 339830299.................................307831099.................................307831212M .............................170861236.................................218861242.................................218861248.................................218861260.................................218861266.................................218861272.................................218861736.................................218861742.................................218861748.................................218861760.................................218861766.................................218861772.................................218862036.................................218862042.................................218862048.................................218862060.................................218862066.................................218862072.................................218870220.................................157870220N..............................158870220NV ...........................158870220R ..............................157870220V ..............................157870224.................................157870224N..............................158870224NV ...........................158870224R ..............................157870224V ..............................157870230.................................157870230N..............................158870230NV ...........................158870230R ..............................157870230V ..............................157870236.................................157870236N..............................158870236NV ...........................158870236R ..............................157870236V ..............................157870242.................................157870242N..............................158870242NV ...........................158870242R ..............................157870242V ..............................157870248.................................157870248N..............................158870248NV ...........................158870248R ..............................157870248V ..............................157870260.................................157870260N..............................158870260NV ...........................158870260R ..............................157870260V ..............................157870300.................................159870301.................................159870343.................................157870369.................................157870469.................................158870824.........................222, 337870824CH ...................222, 337870830.........................222, 337870830CH ...................222, 337870842.........................222, 337870842CH ...................222, 337870860.........................222, 337870860CH ...................222, 3378710120...............................1558710120A ............................1558710144...............................1558710144A ............................155871024.................................155871024A ..............................155871030.................................155871030A ..............................155871036.................................155871036A ..............................155871042.................................155871042A ..............................155871048.................................155871048A ..............................155871060.................................155871060A ..............................155871072.................................155871072A ..............................155871096.................................155871096A ..............................1558711120...............................1548711120A ............................1548711144...............................1548711144A ............................154871124.................................154871124A ..............................154871130.................................154871130A ..............................154871136.................................154871136A ..............................154871142.................................154871142A ..............................154871148.................................154871148A ..............................154871160.................................154871160A ..............................154871172.................................154871172A ..............................154871196.................................154871196A ..............................154871224.................................154871224A ..............................154871230.................................154871230A ..............................154871230E...............................293871236.................................154871236A ..............................154871236E...............................293871242.................................154871242A ..............................154871242E...............................293871248.................................154871248A ..............................154871248E...............................293871260.................................154871260A ..............................1548713108...............................1548713108A ............................154871366.................................154871366A ..............................154871400.................................156871400A ..............................156871501A ..............................156871502A ..............................156871503A ..............................156871601.................................156871601A ..............................156871912.................................156871912A ..............................156871918.................................156871918A ..............................156871972.................................156871972A ..............................156873500.........................159, 293873501.................................156873502.................................156873503.................................156873504.................................156873506.................................156873550.........................159, 293874072.................................156874072A ..............................156874500.................................159874501.................................156874501A ..............................156874502.................................156874502A ..............................156874503.................................156874503A ..............................156874504.................................156874506.................................156874601.................................156874601A ..............................156876072.................................156876072A ..............................156877010.................................160878002.................................160878006.................................159878007.................................159878008.................................160878009.................................160878010.................................160878011.................................159878012.................................293879901E...............................293879904E...............................293891320SF.............................282895620E...............................282895620M .............................282896920E...............................282896920M .............................2828988BLF ......................159, 2938988EB ................................1598988EBN .............................159899900.............................31, 99899910.............................31, 99ACPU2.................................335ACPU3.................................335AEP......................................160AFNLFTP-3018 ...................327AFNLFTP-3036 ...................327AFNLFTP-3618 ...................327AFNLFTP-3636 ...................327AFNLFTP-4218 ...................327AFNLFTP-4236 ...................327AFNLFTP-6018 ...................327AFNLFTP-6036 ...................327AFNLFTP-7218 ...................327AFNLFTP-7236 ...................327AFNLFTP-8418 ...................327AFNLFTP-8436 ...................327AKMK .................................334AMNL .................244, 256, 268APACM2..............160, 222, 337ASPS-24ST ...........................314ASPS-30ST ...........................314ASPT-24SC...................314, 319ASPT-30SC...................314, 319ASPTP-24LL ........................314ASPTP-24LW .......................314ASPTP-30LL ........................314ASPTP-30LW .......................314ATBFEP1229........................198ATBFEP2429........................198ATBFEP3029........................198ATBHEP1229.......................198ATBHEP2429.......................198ATBHEP3029.......................198ATBSL1229..........................198ATCDP-4224LE ...................187ATCDP-4224VE...................187ATCDP-4230LE ...................187ATCDP-4230VE...................187ATCDP-4824LE ...................187ATCDP-4824VE...................187ATCDP-4830LE ...................187ATCDP-4830VE...................187ATCDW-4224LE..................187ATCDW-4230LE..................187ATCDW-4824LE..................187ATCDW-4830LE..................187ATCSP-3624LE ....................186ATCSP-3624VE....................186ATCSP-4224LE ....................186ATCSP-4224VE....................186ATCSP-4230LE ....................186ATCSP-4230VE....................186ATCSP-4824LE ....................186ATCSP-4824VE....................186ATCSP-4830LE ....................186ATCSP-4830VE....................186ATCSW-3624LE...................186ATCSW-4224LE...................186ATCSW-4230LE...................186ATCSW-4824LE...................186ATCSW-4830LE...................186ATN .....................245, 257, 269ATRDP-3630LE ...................185ATRDP-3630VE...................185ATRDP-4230LE ...................185ATRDP-4230VE...................185ATRDP-4830LE ...................185ATRDP-4830VE...................185ATRDW-3630LE..................185ATRDW-4230LE..................185ATRDW-4830LE..................185ATRSP-3624LE ....................184ATRSP-3624VE....................184ATRSP-3630LE ....................184ATRSP-3630VE....................184ATRSP-4224LE ....................184ATRSP-4224VE....................184ATRSP-4230LE ....................184ATRSP-4230VE....................184ATRSP-4824LE ....................184ATRSP-4824VE....................184ATRSP-4830LE ....................184ATRSP-4830VE....................184ATRSP-6024LE ....................184ATRSP-6024VE....................184ATRSP-6030LE ....................184ATRSP-6030VE....................184ATRSW-3624LE...................184ATRSW-3630LE...................184ATRSW-4224LE...................184ATRSW-4230LE...................184ATRSW-4824LE...................184ATRSW-4830LE...................184ATRSW-6024LE...................184ATRSW-6030LE...................184AUW1236MN .....................173AUW1242MN .....................173AUW1248MN .....................173AUW1254MN .....................173AUW1260MN .....................173AUW1266MN .....................173AUW1272MN .....................173AWCDPT-4224 ....................181AWCDPT-4224V..................181AWCDPT-4230 ....................181AWCDPT-4230V..................181AWCDPT-4824 ....................181AWCDPT-4824V..................181AWCDPT-4830 ....................181AWCDPT-4830V..................181AWCDWT-4224...................181AWCDWT-4230...................181AWCDWT-4824...................181AWCDWT-4830...................181AWCS...................................335AWRDPT-3630 ....................181AWRDPT-3630V..................181AWRDPT-4230 ....................181AWRDPT-4230V..................181AWRDPT-4830 ....................181AWRDPT-4830V..................181AWRDWT-3630...................181AWRDWT-4230...................181AWRDWT-4830...................181BMNL..................244, 256, 268CCB18L ...............................307by Model NumberModelPageCCB18R...............................307CCB24L ...............................307CCB24R...............................307CEOMK...............................215CMNL .................244, 256, 268CMT24 ................................160CMT36 ................................160CSDC19...............................333CSDC25...............................333CTN.....................245, 257, 269DMN ...................244, 256, 268DTN.....................245, 257, 269EAAC...................................331EABE....................................332EABS....................................330EACC...................................332EADH ..................................330EAFS ....................................330EAFT....................................332EAHSR36.............................329EAHSR42.............................329EAHSR48.............................329EAHSR60.............................329EAHSR66.............................329EAHSR72.............................329EAMH .................................331EAPC ...................................331EAPS ....................................331EAPT....................................330EASR24................................329EASR30................................329EASR36................................329EASR42................................329EASR48................................329EASR60................................329EASS ....................................331EATS ....................................330ELF230N .............................324ELF236N .............................324ELF242N .............................324ELF330N .............................324ELF336N .............................324ELF342N .............................324ELF430N .............................324ELF430P ..............................324ELF436N .............................324ELF436P ..............................324ELF442N .............................324ELF442P ..............................324ELF530N .............................324ELF530P ..............................324ELF536N .............................324ELF536P ..............................324ELF542N .............................324ELF542P ..............................324ELF830N .............................324ELF836N .............................324ELF842N .............................324EPF23018.............................318ESLM...........................224, 339ET42424LBBF......................318ET42424LFF........................318ET42424LOBBF...................318ET42424LOFF.....................318ET42424RBBF .....................318ET42424RFF........................318ET42424ROBBF ..................318ET42424ROFF.....................318ET52424LBBF......................318ET52424LFF........................318ET52424LOBBF...................318ET52424LOFF.....................318ET52424RBBF .....................318ET52424RFF........................318ET52424ROBBF ..................318ET52424ROFF.....................318ETKP24WL..........................318ETKP24WR .........................318ETKP28H.............................319ETLD24 .......................223, 338ETLD24CH..................223, 338ETLD36 .......................223, 338ETLD36CH..................223, 338346 | Systems Supplement – 3/2013

Cross Reference IndexModel Page Model Page Model Page Model PageETLD48 .......................223, 338ETLD48CH..................223, 338ETLD60 .......................223, 338ETLD60CH..................223, 338ETLDA24.....................223, 338ETLDA24CH...............223, 338ETLDA36.....................223, 338ETLDA36CH...............223, 338ETLDA48.....................223, 338ETLDA48CH...............223, 338ETN .....................245, 257, 269EV920..................................160FAS11...................................273FAS24...................................273FAS30...................................273FAS36...................................273FAS42...................................273FAS48...................................273FC1056P ..............................283FC1069P ..............................283FC1456P ..............................283FC1469P ..............................283FC1556P ..............................283FC1569P ..............................283FC5636E..............................285FC5636MMBA ....................241FC5636MMBB.....................240FC5636MMBC ....................240FC5636MMBH....................241FC5636T..............................284FC5642E..............................285FC5642MMBA ....................248FC5642MMBD....................248FC5642MMBE.....................248FC5642MMBF.....................249FC5642MMBG....................249FC5642MMBH....................249FC5642MMBI......................250FC5642MMBJ .....................250FC5642MMBK ....................251FC5642MMBL.....................251FC5642T..............................284FC5648E..............................285FC5648MMBD....................260FC5648MMBE.....................260FC5648MMBF.....................261FC5648MMBG....................261FC5648MMBH....................261FC5648MMBI......................262FC5648MMBJ .....................262FC5648MMBK ....................263FC5648MMBL.....................263FC5648T..............................284FC6936E..............................285FC6936MMLBA..................243FC6936MMLBB ..................242FC6936MMLBC..................242FC6936MMLBH..................243FC6936MMMBA.................243FC6936MMMBB.................242FC6936MMMBC.................242FC6936MMMBH ................243FC6936T..............................284FC6942E..............................285FC6942MMLBA..................252FC6942MMLBD..................252FC6942MMLBE ..................252FC6942MMLBF...................253FC6942MMLBG..................253FC6942MMLBH..................253FC6942MMLBM.................254FC6942MMLBN..................254FC6942MMLBO..................255FC6942MMLBP...................255FC6942MMMBA.................252FC6942MMMBD ................252FC6942MMMBE.................252FC6942MMMBF .................253FC6942MMMBG ................253FC6942MMMBH ................253FC6942MMMBM................254FC6942MMMBN ................254FC6942MMMBO ................255FC6942MMMBP .................255FC6942T..............................284FC6948E..............................285FC6948MMLBD..................264FC6948MMLBE ..................264FC6948MMLBF...................265FC6948MMLBG..................265FC6948MMLBH..................265FC6948MMLBM.................266FC6948MMLBN..................266FC6948MMLBO..................267FC6948MMLBP...................267FC6948MMMBD ................264FC6948MMMBE.................264FC6948MMMBF .................265FC6948MMMBG ................265FC6948MMMBH ................265FC6948MMMBM................266FC6948MMMBN ................266FC6948MMMBO ................267FC6948MMMBP .................267FC6948T..............................284FCLD5624FQ ......................271FCLD5624PS .......................271FCLD5624SP .......................271FCLD6924FQ ......................271FCLD6924PS .......................271FCLD6924SP .......................271FCMD5624..........................271FCMD6924..........................271FCW5624.............................270FCW6924.............................270FLD1336FQ.........................271FLD1336PS..........................271FLD1336SP..........................271FLD1342FQ.........................271FLD1342PS..........................271FLD1342SP..........................271FLD1348FQ.........................271FLD1348PS..........................271FLD1348SP..........................271FMNL..................244, 256, 268FP3024SL.............................304FP3024SR ............................304FP3030SL.............................304FP3030SR ............................304FP362436U ..........................301FP362442U ..........................301FP3624SL.............................304FP3624SR ............................304FP363036U ..........................301FP363042U ..........................301FP363048U ..........................301FP3630SL.............................304FP3630SR ............................304FP363624U ..........................300FP363630U ..........................300FP364224U ..........................300FP364230U ..........................300FP364830U ..........................300FP36602420ER....................302FP36602424ER....................302FP36603020ER....................302FP36603024ER....................302FP366030JL .........................303FP366030JR.........................303FP367230JL .........................303FP367230JR.........................303FP36724824C ......................299FP36724830C ......................299FP36784824C ......................299FP36784830C ......................299FP36844824C ......................299FP36844830C ......................299FP422436U ..........................301FP422442U ..........................301FP4224SL.............................304FP4224SR ............................304FP423036U ..........................301FP423042U ..........................301FP423048U ..........................301FP4230SL.............................304FP4230SR ............................304FP423624U ..........................300FP423630U ..........................300FP424224U ..........................300FP424230U ..........................300FP424830U ..........................300FP42602420ER....................302FP42602424ER....................302FP42603020ER....................302FP42603024ER....................302FP426030JL .........................303FP426030JR.........................303FP427230JL .........................303FP427230JR.........................303FP42724824C ......................299FP42724830C ......................299FP42784824C ......................299FP42784830C ......................299FP42844824C ......................299FP42844830C ......................299FP482436U ..........................301FP482442U ..........................301FP4824SL.............................304FP4824SR ............................304FP483036U ..........................301FP483042U ..........................301FP483048U ..........................301FP4830SL.............................304FP4830SR ............................304FP483624U ..........................300FP483630U ..........................300FP484224U ..........................300FP484230U ..........................300FP484830U ..........................300FP48602420ER....................302FP48602424ER....................302FP48603020ER....................302FP48603024ER....................302FP48723624C ......................299FP48723630C ......................299FP48724224C ......................299FP48724230C ......................299FP48783624C ......................299FP48783630C ......................299FP48784224C ......................299FP48784230C ......................299FP48843624C ......................299FP48843630C ......................299FP48844224C ......................299FP48844230C ......................299FP602436U ..........................301FP602442U ..........................301FP603036U ..........................301FP603042U ..........................301FP60362024EL ....................302FP60362030EL ....................302FP60362424EL ....................302FP60362430EL ....................302FP603624S...........................298FP603624U ..........................300FP603630S...........................298FP603630U ..........................300FP60422024EL ....................302FP60422030EL ....................302FP60422424EL ....................302FP60422430EL ....................302FP604224U ..........................300FP604230S...........................298FP604230U ..........................300FP60482024EL ....................302FP60482030EL ....................302FP60482424EL ....................302FP60482430EL ....................302FP662436U ..........................301FP662442U ..........................301FP663036U ..........................301FP663042U ..........................301FP663624S...........................298FP663624U ..........................300FP663630S...........................298FP663630U ..........................300FP664224U ..........................300FP664230S...........................298FP664230U ..........................300FP722436U ..........................301FP722442U ..........................301FP723036U ..........................301FP723042U ..........................301FP723624S...........................298FP723624U ..........................300FP723630S...........................298FP723630U ..........................300FP724224U ..........................300FP724230S...........................298FP724230U ..........................300FP724830S...........................298FP783042U ..........................301FP783630S...........................298FP784230S...........................298FP784230U ..........................300FP784830S...........................298FP843042U ..........................301FP843630S...........................298FP844230S...........................298FP844230U ..........................300FP844830S...........................298FPS30...................................273FPS36...................................273FPS42...................................273FPS48...................................273FPT-72201E .........................305FPT-72202E .........................305FPT-7220NE ........................305FPT-78201E .........................305FPT-78202E .........................305FPT-7820NE ........................305FPT-84201E .........................305FPT-84202E .........................305FPT-8420NE ........................305FPT-90201E .........................305FPT-90202E .........................305FPT-9020NE ........................305FPT-9620NE ........................305FSS .......................................273FT4336MMBA ....................239FT4336MMBB.....................239FT4336MMBC ....................239FT4336MMBH....................239FT4342MMBA ....................246FT4342MMBD ....................246FT4342MMBE.....................246FT4342MMBF.....................247FT4342MMBG ....................247FT4342MMBH....................247FT4348MMBD ....................258FT4348MMBE.....................258FT4348MMBF.....................259FT4348MMBG ....................259FT4348MMBH....................259FT5636MMBA ....................241FT5636MMBB.....................240FT5636MMBC ....................240FT5636MMBH....................241FT5642MMBA ....................248FT5642MMBD ....................248FT5642MMBE.....................248FT5642MMBF.....................249FT5642MMBG ....................249FT5642MMBH....................249FT5642MMBI......................250FT5642MMBJ......................250FT5642MMBK ....................251FT5642MMBL.....................251FT5648MMBD ....................260FT5648MMBE.....................260FT5648MMBF.....................261FT5648MMBG ....................261FT5648MMBH....................261FT5648MMBI......................262FT5648MMBJ......................262FT5648MMBK ....................263FT5648MMBL.....................263FT6936MMLBA ..................243FT6936MMLBB...................242FT6936MMLBC ..................242FT6936MMLBH..................243FT6936MMMBA.................243by Model NumberModelPageFT6936MMMBB .................242FT6936MMMBC.................242FT6936MMMBH ................243FT6942MMLBA ..................252FT6942MMLBD..................252FT6942MMLBE...................252FT6942MMLBF...................253FT6942MMLBG..................253FT6942MMLBH..................253FT6942MMLBM .................254FT6942MMLBN..................254FT6942MMLBO..................255FT6942MMLBP...................255FT6942MMMBA.................252FT6942MMMBD.................252FT6942MMMBE .................252FT6942MMMBF .................253FT6942MMMBG.................253FT6942MMMBH ................253FT6942MMMBM................254FT6942MMMBN ................254FT6942MMMBO ................255FT6942MMMBP .................255FT6948MMLBD..................264FT6948MMLBE...................264FT6948MMLBF...................265FT6948MMLBG..................265FT6948MMLBH..................265FT6948MMLBM .................266FT6948MMLBN..................266FT6948MMLBO..................267FT6948MMLBP...................267FT6948MMMBD.................264FT6948MMMBE .................264FT6948MMMBF .................265FT6948MMMBG.................265FT6948MMMBH ................265FT6948MMMBM................266FT6948MMMBN ................266FT6948MMMBO ................267FT6948MMMBP .................267FTK136........................276, 286FTK142........................276, 286FTK148........................276, 286FTK236................276, 280, 286FTK242................276, 280, 286FTK248................276, 280, 286FTLD5624FQ ......................271FTLD5624PS........................271FTLD5624SP........................271FTLD6924FQ ......................271FTLD6924PS........................271FTLD6924SP........................271FTMD5624..........................271FTMD6924..........................271FTN343N ............................275FTN356N ............................275FTN369N ............................275FTN43NE ............................275FTN43SE .....................275, 279FTN56NE ............................275FTN56SE .....................275, 279FTN69NE ............................275FTN69SE .....................275, 279FTT236SB............................280FTT236SS ............................280FTT242SB............................280FTT242SS ............................280FTT248SB............................280FTT248SS ............................280FTT343N.............................279FTT356N.............................279FTT369N.............................279FTT43NE.............................279FTT56NE.............................279FTT69NE.............................279FTW5624.............................270FTW6924.............................270FUSBJ...................................293FV3024SL ............................304FV3024SR............................304FV3030SL ............................304FV3030SR............................304OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 347

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESCross Reference IndexModel Page Model Page Model Page Model PageFV3624SL ............................304FV3624SR............................304FV3630SL ............................304FV3630SR............................304FV36602420ER ...................302FV36602424ER ...................302FV36603020ER ...................302FV36603024ER ...................302FV4224SL ............................304FV4224SR............................304FV4230SL ............................304FV4230SR............................304FV42602420ER ...................302FV42602424ER ...................302FV42603020ER ...................302FV42603024ER ...................302FV4824SL ............................304FV4824SR............................304FV4830SL ............................304FV4830SR............................304FV48602420ER ...................302FV48602424ER ...................302FV48603020ER ...................302FV48603024ER ...................302FV60362024EL....................302FV60362030EL....................302FV60362424EL....................302FV60362430EL....................302FV60422024EL....................302FV60422030EL....................302FV60422424EL....................302FV60422430EL....................302FV60482024EL....................302FV60482030EL....................302FV60482424EL....................302FV60482430EL....................302FVT-72201E.........................305FVT-72202E.........................305FVT-7220NE........................305FVT-78201E.........................305FVT-78202E.........................305FVT-7820NE........................305FVT-84201E.........................305FVT-84202E.........................305FVT-8420NE........................305FVT-90201E.........................305FVT-90202E.........................305FVT-9020NE........................305FVT-96201E.........................305FVT-96202E.........................305FVT-9620NE........................305FW3024SL ...........................304FW3024SR...........................304FW3030SL ...........................304FW3030SR...........................304FW362436U.........................301FW362442U.........................301FW3624SL ...........................304FW3624SR...........................304FW363036U.........................301FW363042U.........................301FW363048U.........................301FW3630SL ...........................304FW3630SR...........................304FW363624U.........................300FW363630U.........................300FW364224U.........................300FW364230U.........................300FW364830U.........................300FW36602420ER ..................302FW36602424ER ..................302FW36603020ER ..................302FW36603024ER ..................302FW366030JL........................303FW366030JR .......................303FW367230JL........................303FW367230JR .......................303FW36724824C.....................299FW36724830C.....................299FW36784824C.....................299FW36784830C.....................299FW36844824C.....................299FW36844830C.....................299FW422436U.........................301FW422442U.........................301FW4224SL ...........................304FW4224SR...........................304FW423036U.........................301FW423042U.........................301FW423048U.........................301FW4230SL ...........................304FW4230SR...........................304FW423624U.........................300FW423630U.........................300FW424224U.........................300FW424230U.........................300FW424830U.........................300FW42602420ER ..................302FW42602424ER ..................302FW42603020ER ..................302FW42603024ER ..................302FW426030JL........................303FW426030JR .......................303FW427230JL........................303FW427230JR .......................303FW42724824C.....................299FW42724830C.....................299FW42784824C.....................299FW42784830C.....................299FW42844824C.....................299FW42844830C.....................299FW482436U.........................301FW482442U.........................301FW4824SL ...........................304FW4824SR...........................304FW483036U.........................301FW483042U.........................301FW483048U.........................301FW4830SL ...........................304FW4830SR...........................304FW483624U.........................300FW483630U.........................300FW484224U.........................300FW484230U.........................300FW484830U.........................300FW48602420ER ..................302FW48602424ER ..................302FW48603020ER ..................302FW48603024ER ..................302FW48723624C.....................299FW48723630C.....................299FW48724224C.....................299FW48724230C.....................299FW48783624C.....................299FW48783630C.....................299FW48784224C.....................299FW48784230C.....................299FW48843624C.....................299FW48843630C.....................299FW48844224C.....................299FW48844230C.....................299FW602436U.........................301FW602442U.........................301FW603036U.........................301FW603042U.........................301FW60362024EL...................302FW60362030EL...................302FW60362424EL...................302FW60362430EL...................302FW603624S .........................298FW603624U.........................300FW603630S .........................298FW603630U.........................300FW60422024EL...................302FW60422030EL...................302FW60422424EL...................302FW60422430EL...................302FW604224U.........................300FW604230S .........................298FW604230U.........................300FW60482024EL...................302FW60482030EL...................302FW60482424EL...................302FW60482430EL...................302FW662436U.........................301FW662442U.........................301FW663036U.........................301FW663042U.........................301FW663624S .........................298FW663624U.........................300FW663630S .........................298FW663630U.........................300FW664224U.........................300FW664230S .........................298FW664230U.........................300FW722436U.........................301FW722442U.........................301FW723036U.........................301FW723042U.........................301FW723624S .........................298FW723624U.........................300FW723630S .........................298FW723630U.........................300FW724224U.........................300FW724230S .........................298FW724230U.........................300FW724830S .........................298FW783042U.........................301FW783630S .........................298FW784230S .........................298FW784230U.........................300FW784830S .........................298FW843042U.........................301FW843630S .........................298FW844230S .........................298FW844230U.........................300FW844830S .........................298GTN.....................245, 257, 269HTN ....................245, 257, 269L919491...............................325L919492...............................325L919703...............................325LFA-CW...............................325LFA-DIV12 ..........................325LFA-FB.................................325LFA-SS30 .............................325LFA-SS36 .............................325LFA-SS42 .............................325LKF23C ...............................341LKF23CE4 ...........................341LKF23CN ............................341LKF25E4..............................341LKF25EL..............................341LTFF-30 ...............................326LTFF-36 ...............................326LTFF-42 ...............................326LTFF-60 ...............................326LTFF-66 ...............................326LTFF-72 ...............................326LTFFV-30V ..........................326LTFFV-36V ..........................326LTFFV-42V ..........................326LTFFV-60V ..........................326LTFFV-66V ..........................326LTFFV-72V ..........................326LTFFV-84V ..........................326MANL .................244, 256, 268MAP.....................244, 256, 268MBNL..................244, 256, 268MBP.....................244, 256, 268MCNL .................244, 256, 268MCP.....................244, 256, 268MDN ...................244, 256, 268MDP ....................244, 256, 268MF22 ...................................341MFNL..................244, 256, 268MFP .....................244, 256, 268MKF22.................................341MRK36................................332MRK42................................332MRK48................................332P1050CST............................319P20040AG ...........................319P519495...............................319PD80....................................319PF167-203............................316PF167-233............................316PF167-303............................316PF177-202............................316PF177-232............................316PF177-302............................316PF197-203............................316PF197-233............................316PF197-303............................316PF198-202............................316PF198-232............................316PF198-302............................316PFB80...................................319PH149-202...........................316PH149-232...........................316PLF230N..............................322PLF236N..............................322PLF242N..............................322PLF330N..............................322PLF336N..............................322PLF342N..............................322PLF430N..............................322PLF430P...............................322PLF436N..............................322PLF436P...............................322PLF442N..............................322PLF442P...............................322PLF530M.............................323PLF530N..............................323PLF530P...............................323PLF536M.............................323PLF536N..............................323PLF536P...............................323PLF542M.............................323PLF542N..............................323PLF542P...............................323PLF630N..............................323PLF630P...............................323PLF636N..............................323PLF636P...............................323PLF642N..............................323PLF642P...............................323PM119-232..........................317PM137-203..........................317PM137-233..........................317PM137-303..........................317PM138-202..........................317PM138-232..........................317PM138-302..........................317PM187-203..........................317PM187-233..........................317PM187-303..........................317PM188-202..........................317PM188-232..........................317PM188-302..........................317PMC6...................................332PMEARK24 .........................219PMEARK30 .........................219PMEARK36 .........................219PMEARK42 .........................219PMEARK48 .........................219PMP41 .................................197PMP47 .................................197PMP53 .................................197PS116-20PC .........................319PS116-23PC .........................319PS116-30PC .........................319PSEARK24...........................219PSEARK30...........................219PSEARK36...........................219PSEARK42...........................219PSEARK48...........................219PT17-20TTP ........................319PT17-23TTP ........................319PT17-29TTP ........................319PTS09...................................312PTS15...................................312RCR25.................................341T2283-324 ...........................315T2283-330 ...........................315T2283-424 ...........................315T2283-430 ...........................315T2DP....................................160T52424Q .............................179T52424S...............................170T52430S...............................170T52436S...............................170by Model NumberModelPageT52442S...............................170T52448S...............................170T52454S...............................170T52460S...............................170T52466S...............................170T52472S...............................170T52478S...............................170T52484S...............................170T52490S...............................170T52496S...............................170T524D..................................179T5302430W.........................172T53024S...............................171T5303024W.........................172T53030Q .............................179T53030S...............................171T53036S...............................171T53042S...............................171T53048S...............................171T53054S...............................171T53060B ..............................176T53060S...............................171T53066B ..............................176T53066S...............................171T53072B ..............................176T53072PL ............................176T53072PR............................176T53072S...............................171T53078S...............................171T53084S...............................171T53090S...............................171T53096S...............................171T530D..................................179T5362430W.........................172T53624C..............................174T53624CR ...........................174T5363024W.........................172T53636CS............................193T53660B ..............................176T53662CL............................178T53662CR ...........................178T53666B ..............................176T53672B ..............................176T53722CL............................178T53722CR ...........................178T5422430W.........................172T54224C..............................174T54224CR ...........................174T5423024W.........................172T54230C..............................174T54230CR ...........................174T54242CS............................193T54662JL.............................176T54662JR ............................176T54663CL............................178T54663CR ...........................178T54663JL.............................176T54663JR ............................176T547221BL..........................177T547221BR..........................177T547229BL..........................177T547229BR..........................177T54722JL.............................176T54722JR ............................176T547231BL..........................177T547231BR..........................177T547239BL..........................177T547239BR..........................177T54723CL............................178T54723CR ...........................178T54723JL.............................176T54723JR ............................176T5482430W.........................172T54824C..............................174T54824CR ...........................174T5483024W.........................172T54830C..............................174T54830CR ...........................174T5542430W.........................172T5543024W.........................172T5602430W.........................172T5603024W.........................172T5622EL..............................175348 | Systems Supplement – 3/2013

Cross Reference IndexModel Page Model Page Model Page Model PageT5622ER..............................175T5623EL..............................175T5623ER..............................175T5632EL..............................175T5632ER..............................175T5633EL..............................175T5633ER..............................175T5662430W.........................172T5663024W.........................172T5722430W.........................172T5722EL..............................175T5722ER..............................175T5723024W.........................172T5723EL..............................175T5723ER..............................175T5732EL..............................175T5732ER..............................175T5733EL..............................175T5733ER..............................175T5822EL..............................175T5822ER..............................175T5832EL..............................175T5832ER..............................175T5922EL..............................175T5922ER..............................175T5932EL..............................175T5932ER..............................175T61029FEN .........................194T61029PEN .........................194T612FB ................................195T61624MPD........................197T61630MPD........................197T61636MPD........................197T61642MPD........................197T61648MPD........................197T61654MPD........................197T61660MPD........................197T61666MPD........................197T61672MPD........................197T62429FEN .........................194T62429PEN .........................194T62429SLF ..........................194T62429SLP ..........................194T624CB................................195T624FB ................................195T62924MPD........................197T62930MPD........................197T62936MPD........................197T62942MPD........................197T62948MPD........................197T62954MPD........................197T62960MPD........................197T62966MPD........................197T62972MPD........................197T629CLD.............................196T63029FEN .........................194T63029PEN .........................194T63029SLF ..........................194T63029SLP ..........................194T630FB ................................195T6BK............................195, 306T6CB12L .............................195T6CB12R.............................195T6CB18L .............................306T6CB18R.............................306T6CB24L .....................195, 306T6CB24R.....................195, 306T6DG...................................197T6DP....................................196T6EPK..................................194T6FHBK...............................196T6FHRK ..............................196T6HHBK..............................196T6HHRK .............................196T6PEN .................................194T6PPKL................................195T6PPKR ...............................195T6SB ....................................195T724S...................................214T730S...................................214T736HN ..............................217T736S...................................214T742HN ..............................217T742S...................................214T748HN ..............................217T748S...................................214T760HN ..............................217T760S...................................214T766HN ..............................217T772HN ..............................217T7DV...........................214, 218T836HD...............................216T836HM..............................216T842HD...............................216T842HM..............................216T848HD...............................216T848HM..............................216T860HD...............................216T860HM..............................216T866HD...............................216T866HM..............................216T872HD...............................216T872HM..............................216TADF3 .................................161TADF4 .................................161TADF4F ...............................161TADJ5..................................161TADJ6..................................161TAMCA510A.......................162TAMCA510B .......................162TAMCA530A.......................162TAMCA530B .......................162TAMCA550A.......................162TAMCA550B .......................162TAMCCB6 ...........................162TAMCCBT...........................162TAMCP5..............................162TAMCPF..............................162TAN .....................245, 257, 269TAWG ..................................160TBPLATE3-36......................161TBPLATE3-42......................161TBPLATE3-48......................161TBPLATE3-60......................161TC03024................................98TC03024M ............................97TC03030................................98TC03030M ............................97TC03036................................98TC03036M ............................97TC03042................................98TC03042M ............................97TC03048................................98TC03048M ............................97TC03060................................98TC03060M ............................97TC04324................................98TC04324M ............................97TC04330................................98TC04330M ............................97TC04336................................98TC04336M ............................97TC04342................................98TC04342M ............................97TC04348................................98TC04348M ............................97TC04360................................98TC04360M ............................97TC05624................................98TC05624M ............................97TC05630................................98TC05630M ............................97TC05636................................98TC05636M ............................97TC05642................................98TC05642M ............................97TC05648................................98TC05648M ............................97TC05660................................98TC05660M ............................97TC06924................................98TC06924M ............................97TC06930................................98TC06930M ............................97TC06936................................98TC06936M ............................97TC06942................................98TC06942M ............................97TC06948................................98TC06948M ............................97TC06960................................98TC06960M ............................97TC14320E............................274TC14320M ..........................274TC15620E............................274TC15620M ..........................274TC16920E............................274TC16920M ..........................274TC18242D.............................99TC24FW ..............................215TC30FW ..............................215TC313BP..............................109TC313BV.............................111TC313CP .............................111TC313EP..............................109TC313EV.............................112TC313HP.............................108TC313HTP ..........................115TC313HTV..........................117TC313HV ............................112TC313LP..............................108TC313LTP ...........................114TC313LTV...........................116TC313LV .............................110TC313SP..............................109TC313STP............................114TC313STV...........................116TC313SV .............................112TC313TNNP .......................114TC313TNNV.......................116TC313TP .............................108TC313TTNP........................114TC313TTNV .......................116TC313TV.............................110TC313XP.....................108, 110TC313XTP...................115, 117TC326BP..............................109TC326BV.............................111TC326EP..............................109TC326EV.............................112TC326HP.............................108TC326HTP ..........................115TC326HTV..........................117TC326HV ............................112TC326LP..............................108TC326LTP ...........................114TC326LTV...........................116TC326LV .............................110TC326SP..............................109TC326STP............................114TC326STV...........................116TC326SV .............................112TC326TNNP .......................114TC326TNNV.......................116TC326TP .............................108TC326TTNP........................114TC326TTNV .......................116TC326TV.............................110TC330BP..............................109TC330BV.............................111TC330CP .............................111TC330EP..............................109TC330EV.............................112TC330LP..............................108TC330LTP ...........................114TC330LTV...........................116TC330LV .............................110TC330SP..............................109TC330STP............................114TC330STV...........................116TC330SV .............................112TC330TNNP .......................114TC330TNNV.......................116TC330TP .............................108TC330TTNP........................114TC330TTNV .......................116TC330TV.............................110TC330XP.....................108, 110TC330XTP...................115, 117TC339BP..............................109TC339BV.............................111TC339EP..............................109TC339EV.............................112TC339HP.............................108TC339HTP ..........................115TC339HTV..........................117TC339HV ............................112TC339LP..............................108TC339LTP ...........................114TC339LTV...........................116TC339LV .............................110TC339SP..............................109TC339STP............................114TC339STV...........................116TC339SV .............................112TC339TNNP .......................114TC339TNNV.......................116TC339TP .............................108TC339TTNP........................114TC339TTNV .......................116TC339TV.............................110TC343BP..............................109TC343BV.............................111TC343CP .............................111TC343EP..............................109TC343EV.............................112TC343LP..............................108TC343LTP ...........................114TC343LTV...........................116TC343LV .............................110TC343SP..............................109TC343STP............................114TC343STV...........................116TC343SV .............................112TC343TNNP .......................114TC343TNNV.......................116TC343TP .............................108TC343TTNP........................114TC343TTNV .......................116TC343TV.............................110TC343XP.....................108, 110TC343XTP...................115, 117TC356BP..............................109TC356BV.............................111TC356CP .............................111TC356EP..............................109TC356EV.............................112TC356LP..............................108TC356LTP ...........................114TC356LTV...........................116TC356LV .............................110TC356SP..............................109TC356STP............................114TC356STV...........................116TC356SV .............................112TC356TNNP .......................114TC356TNNV.......................116TC356TP .............................108TC356TTNP........................114TC356TTNV .......................116TC356TV.............................110TC356XP.....................108, 110TC356XTP...................115, 117TC369BP..............................109TC369BV.............................111TC369CP .............................111TC369EP..............................109TC369EV.............................112TC369LP..............................108TC369LTP ...........................114TC369LTV...........................116TC369LV .............................110TC369SP..............................109TC369STP............................114TC369STV...........................116TC369SV .............................112TC369TNNP .......................114TC369TNNV.......................116TC369TP .............................108TC369TTNP........................114TC369TTNV .......................116TC369TV.............................110by Model NumberModelPageTC369WP ....................109, 112TC369XP.....................108, 110TC369XTP...................115, 117TC36FW ..............................215TC42FW ..............................215TC48FW ..............................215TC60FW ..............................215TCN.....................245, 257, 269TCSRVKIT.............................82TDN.....................245, 257, 269TE24FNN ............................213TE30FNN ............................213TE36FNN ............................213TE42FNN ............................213TE48FNN ............................213TE60FNN ............................213TEN .....................245, 257, 269TGN.....................245, 257, 269THN ....................245, 257, 269TN01320 .............................274TN01324 ...............................99TN01330 ...............................99TN01336 ...............................99TN01342 ...............................99TN01348 ...............................99TN01360 ...............................99TN03024 ...............................98TN03024MM ........................96TN03030 ...............................98TN03030MM ........................96TN03036 ...............................98TN03036MM ........................96TN03042 ...............................98TN03042MM ........................96TN03048 ...............................98TN03048MM ........................96TN03060 ...............................98TN03060MM ........................96TN04324 ...............................98TN04324MM ........................96TN04330 ...............................98TN04330MM ........................96TN04336 ...............................98TN04336MM ........................96TN04342 ...............................98TN04342MM ........................96TN04348 ...............................98TN04348MM ........................96TN04360 ...............................98TN04360MM ........................96TN05624 ...............................98TN05624MM ........................96TN05630 ...............................98TN05630MM ........................96TN05636 ...............................98TN05636MM ........................96TN05642 ...............................98TN05642MM ........................96TN05648 ...............................98TN05648MM ........................96TN05660 ...............................98TN05660MM ........................96TN06924 ...............................98TN06924MM ........................96TN06930 ...............................98TN06930MM ........................96TN06936 ...............................98TN06936MM ........................96TN06942 ...............................98TN06942MM ........................96TN06948 ...............................98TN06948MM ........................96TN06960 ...............................98TN06960MM ........................96TN14320E ...........................274TN14320M..........................274TN15620E ...........................274TN15620M..........................274TN16920E ...........................274TN16920M..........................274TN18242D.............................99TN224SS................................99TN224ST .............................124OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 349

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESCross Reference IndexModel Page Model Page Model Page Model PageTN230SS................................99TN230ST .............................124TN236SS................................99TN236ST .............................124TN242SS................................99TN242ST .............................124TN248SS................................99TN248ST .............................124TN260SS................................99TN260ST .............................124TN313B ...............................103TN313C...............................103TN313E ...............................104TN313H ..............................104TN313HT............................107TN313L ...............................102TN313LT .............................106TN313S................................104TN313ST .............................106TN313T...............................102TN313TNN.........................106TN313TTN..........................106TN313X...............................102TN313XT ............................107TN326B ...............................103TN326C...............................103TN326E ...............................104TN326H ..............................104TN326HT............................107TN326L ...............................102TN326LT .............................106TN326S................................104TN326ST .............................106TN326T...............................102TN326TNN.........................106TN326TTN..........................106TN330B ...............................103TN330C...............................103TN330E ...............................104TN330L ...............................102TN330LT .............................106TN330S................................104TN330T...............................102TN330TNN.........................106TN330TTN..........................106TN330X...............................102TN330XT ............................107TN339B ...............................103TN339C...............................103TN339E ...............................104TN339H ..............................104TN339HT............................107TN339L ...............................102TN339LT .............................106TN339S................................104TN339ST .............................106TN339T...............................102TN339TNN.........................106TN339TTN..........................106TN343B ...............................103TN343C...............................103TN343E ...............................104TN343L ...............................102TN343LT .............................106TN343S................................104TN343T...............................102TN343TNN.........................106TN343TTN..........................106TN343X...............................102TN343XT ............................107TN356B ...............................103TN356C...............................103TN356E ...............................104TN356L ...............................102TN356LT .............................106TN356S................................104TN356T...............................102TN356TNN.........................106TN356TTN..........................106TN356X...............................102TN356XT ............................107TN369B ...............................103TN369C...............................103TN369E ...............................104TN369L ...............................102TN369LT .............................106TN369S................................104TN369T...............................102TN369TNN.........................106TN369TTN..........................106TN369W..............................105TN369X...............................102TN369XT ............................107TN3MP................................113TN41320FD.........................127TN41320FQ ........................130TN41320FS..........................122TN41320NHS......................132TN41320PS..........................129TN41320SM........................123TN41320SMP......................128TN41320SP..........................126TN41320T...........................120TN41320V...........................134TN41324E ...........................121TN41324FD.........................127TN41324FQ ........................130TN41324FS..........................122TN41324GK........................125TN41324M..........................131TN41324NHS......................132TN41324NML.....................131TN41324PS..........................129TN41324SM........................123TN41324SMP......................128TN41324SP..........................126TN41324SW................124, 329TN41324T...........................120TN41324V...........................134TN41324VE.........................135TN41330E ...........................121TN41330FD.........................127TN41330FQ ........................130TN41330FS..........................122TN41330GK........................125TN41330M..........................131TN41330NHS......................132TN41330NML.....................131TN41330PS..........................129TN41330SM........................123TN41330SMP......................128TN41330SP..........................126TN41330SW................124, 329TN41330T...........................120TN41330V...........................134TN41330VE.........................135TN41336E ...........................121TN41336FD.........................127TN41336FQ ........................130TN41336FS..........................122TN41336GK........................125TN41336M..........................131TN41336NHS......................132TN41336NML.....................131TN41336PS..........................129TN41336SM........................123TN41336SMP......................128TN41336SP..........................126TN41336SW................124, 329TN41336SWF..............124, 277TN41336T...........................120TN41336V...........................134TN41336VE.........................135TN41342E ...........................121TN41342FD.........................127TN41342FQ ........................130TN41342FS..........................122TN41342GK........................125TN41342M..........................131TN41342NHS......................132TN41342NML.....................131TN41342PS..........................129TN41342SM........................123TN41342SMP......................128TN41342SP..........................126TN41342SW................124, 329TN41342SWF..............124, 277TN41342T...........................120TN41342V...........................134TN41342VE.........................135TN41348E ...........................121TN41348FD.........................127TN41348FQ ........................130TN41348FS..........................122TN41348GK........................125TN41348M..........................131TN41348NHS......................132TN41348NML.....................131TN41348PS..........................129TN41348SM........................123TN41348SMP......................128TN41348SP..........................126TN41348SW................124, 329TN41348SWF..............124, 277TN41348T...........................120TN41348V...........................134TN41348VE.........................135TN41360E ...........................121TN41360FD.........................127TN41360FQ ........................130TN41360FS..........................122TN41360GK........................125TN41360M..........................131TN41360NHS......................132TN41360NML.....................131TN41360PS..........................129TN41360SM........................123TN41360SMP......................128TN41360SP..........................126TN41360SW................124, 329TN41360T...........................120TN41360V...........................134TN41360VE.........................135TN42620FD.........................127TN42620FQ ........................130TN42620FS..........................122TN42620NHS......................132TN42620PS..........................129TN42620SM........................123TN42620SMP......................128TN42620SP..........................126TN42620T...........................120TN42620V...........................134TN42624FD.........................127TN42624FQ ........................130TN42624FS..........................122TN42624GK........................125TN42624M..........................131TN42624NHS......................132TN42624NML.....................131TN42624PS..........................129TN42624SM........................123TN42624SMP......................128TN42624SP..........................126TN42624T...........................120TN42624V...........................134TN42624VE.........................135TN42630FD.........................127TN42630FQ ........................130TN42630FS..........................122TN42630GK........................125TN42630M..........................131TN42630NHS......................132TN42630NML.....................131TN42630PS..........................129TN42630SM........................123TN42630SMP......................128TN42630SP..........................126TN42630T...........................120TN42630V...........................134TN42630VE.........................135TN42636E ...........................121TN42636FD.........................127TN42636FQ ........................130TN42636FS..........................122TN42636GK........................125TN42636M..........................131TN42636NHS......................132TN42636NML.....................131TN42636PS..........................129TN42636SM........................123TN42636SMP......................128TN42636SP..........................126TN42636T...........................120TN42636V...........................134TN42636VE.........................135TN42642E ...........................121TN42642FD.........................127TN42642FQ ........................130TN42642FS..........................122TN42642GK........................125TN42642M..........................131TN42642NHS......................132TN42642NML.....................131TN42642PS..........................129TN42642SM........................123TN42642SMP......................128TN42642SP..........................126TN42642T...........................120TN42642V...........................134TN42642VE.........................135TN42648E ...........................121TN42648FD.........................127TN42648FQ ........................130TN42648FS..........................122TN42648GK........................125TN42648M..........................131TN42648NHS......................132TN42648NML.....................131TN42648PS..........................129TN42648SM........................123TN42648SMP......................128TN42648SP..........................126TN42648T...........................120TN42648V...........................134TN42648VE.........................135TN42660FD.........................127TN42660FQ ........................130TN42660FS..........................122TN42660GK........................125TN42660M..........................131TN42660NHS......................132TN42660NML.....................131TN42660PS..........................129TN42660SM........................123TN42660SMP......................128TN42660SP..........................126TN42660T...........................120TN42660V...........................134TN42660VE.........................135TN43020FD.........................127TN43020FQ ........................130TN43020FS..........................122TN43020NHS......................132TN43020PS..........................129TN43020SM........................123TN43020SMP......................128TN43020SP..........................126TN43020T...................118, 120TN43020V...........................134TN43024FD.........................127TN43024FQ ........................130TN43024FS..........................122TN43024NHS......................132TN43024PS..........................129TN43024SM........................123TN43024SMP......................128TN43024SP..........................126TN43024T...................118, 120TN43024V...........................134TN43030FD.........................127TN43030FQ ........................130TN43030FS..........................122TN43030NHS......................132TN43030PS..........................129TN43030SM........................123TN43030SMP......................128TN43030SP..........................126TN43030T...................118, 120TN43030V...........................134TN43036FD.........................127TN43036FQ ........................130by Model NumberModelPageTN43036FS..........................122TN43036NHS......................132TN43036PS..........................129TN43036SM........................123TN43036SMP......................128TN43036SP..........................126TN43036T...................118, 120TN43036V...........................134TN43042FD.........................127TN43042FQ ........................130TN43042FS..........................122TN43042NHS......................132TN43042PS..........................129TN43042SM........................123TN43042SMP......................128TN43042SP..........................126TN43042T...................118, 120TN43042V...........................134TN43048FD.........................127TN43048FQ ........................130TN43048FS..........................122TN43048NHS......................132TN43048PS..........................129TN43048SM........................123TN43048SMP......................128TN43048SP..........................126TN43048T...................118, 120TN43048V...........................134TN43060FD.........................127TN43060FQ ........................130TN43060FS..........................122TN43060NHS......................132TN43060PS..........................129TN43060SM........................123TN43060SMP......................128TN43060SP..........................126TN43060T...................118, 120TN43060V...........................134TN43936T...........................120TN43942T...........................120TN43948T...........................120TN44324V...........................134TN44330V...........................134TN44336V...........................134TN44342V...........................134TN44348V...........................134TN4CTK20B........................133TN4CTK20F........................133TN4CTK20S........................133TN4CTK20SV .....................139TN4CTK24B........................133TN4CTK24F........................133TN4CTK24S........................133TN4CTK24SV .....................139TN4CTK30B........................133TN4CTK30F........................133TN4CTK30S........................133TN4CTK30SV .....................139TN4CTK36B........................133TN4CTK36F........................133TN4CTK36S........................133TN4CTK36SV .....................139TN4CTK42B........................133TN4CTK42F........................133TN4CTK42S........................133TN4CTK42SV .....................139TN4CTK48B........................133TN4CTK48F........................133TN4CTK48S........................133TN4CTK48SV .....................139TN4CTK60B........................133TN4CTK60F........................133TN4CTK60S........................133TN4CTK60SV .....................139TN4SPSK .............................126TN51524S............................190TN51530S............................190TN51536S............................190TN51542S............................190TN51548S............................190TN51554S............................190TN51560S............................190TN51566S............................190350 | Systems Supplement – 3/2013

Cross Reference IndexModel Page Model Page Model Page Model PageTN51572S............................190TN52424C...........................191TN52424Q ..........................179TN52424SD.........................180TN524D...............................179TN53030C...........................191TN53030CSB.......................192TN53030Q ..........................179TN530D...............................179TN53636C...........................191TN53636CSB.......................192TN54242CSB.......................192TN54848CSB.......................192TN94320T...........................118TN94324E ...........................119TN94324T...........................118TN94330E ...........................119TN94330T...........................118TN94336E ...........................119TN94336T...........................118TN94342E ...........................119TN94342T...........................118TN94348E ...........................119TN94348T...........................118TN94360E ...........................119TN94360T...........................118TN95620T...........................118TN95624E ...........................119TN95624T...........................118TN95630E ...........................119TN95630T...........................118TN95636E ...........................119TN95636T...........................118TN95642E ...........................119TN95642T...........................118TN95648E ...........................119TN95648T...........................118TN95660E ...........................119TN95660T...........................118TN96920T...........................118TN96924E ...........................119TN96924T...........................118TN96930E ...........................119TN96930T...........................118TN96936E ...........................119TN96936T...........................118TN96942E ...........................119TN96942T...........................118TN96948E ...........................119TN96948T...........................118TN96960E ...........................119TN96960T...........................118TNDMK30 ..........................101TNDMK36 ..........................101TNDMK42 ..........................101TNDMK48 ..........................101TNV51524S.........................190TNV51530S.........................190TNV51536S.........................190TNV51542S.........................190TNV51548S.........................190TNV51554S.........................190TNV51560S.........................190TNV51566S.........................190TNV51572S.........................190TNV52424C ........................191TNV52424Q........................179TNV52424SD ......................180TNV524D............................179TNV53030C ........................191TNV53030CSB ....................192TNV53030Q........................179TNV530D............................179TNV53636C ........................191TNV53636CSB ....................192TNV54242CSB ....................192TNV54848CSB ....................192TNVS2620...........................137TNVS2624...........................137TNVS2630...........................137TNVS2636...........................137TNVS2642...........................137TNVS2648...........................137TNVS2660...........................137TNVS3920...........................137TNVS3924...........................137TNVS3930...........................137TNVS3936...........................137TNVS3942...........................137TNVS3948...........................137TNVS3960...........................137TNVS5220...........................138TNVS5224...........................138TNVS5230...........................138TNVS5236...........................138TNVS5242...........................138TNVS5248...........................138TNVS5260...........................138TNVS6520...........................138TNVS6524...........................138TNVS6530...........................138TNVS6536...........................138TNVS6542...........................138TNVS6548...........................138TNVS6560...........................138TNVS7824...........................139TNVS7830...........................139TNVS7836...........................139TNVS7842...........................139TNVS7848...........................139TNVS7860...........................139TNVS9124...........................139TNVS9130...........................139TNVS9136...........................139TNVS9142...........................139TNVS9148...........................139TNVS9160...........................139TNW51524S........................190TNW51530S........................190TNW51536S........................190TNW51542S........................190TNW51548S........................190TNW51554S........................190TNW51560S........................190TNW51566S........................190TNW51572S........................190TNW52424C .......................191TNW52424Q.......................179TNW52424SD .....................180TNW524D...........................179TNW53030C .......................191TNW53030CSB ...................192TNW53030Q.......................179TNW530D...........................179TNW53636C .......................191TNW53636CSB ...................192TNW54242CSB ...................192TNW54848CSB ...................192TP24ME...............................210TP24MN..............................210TP24RE................................210TP24REAF...........................211TP24RENF...........................211TP24RN...............................210TP24RNAF ..........................211TP24RNNF..........................211TP24UP................................219TP30CNI..............................212TP30ME...............................210TP30MN..............................210TP30RE................................210TP30REAF...........................211TP30RENF...........................211TP30RN...............................210TP30RNAF ..........................211TP30RNNF..........................211TP30UP................................219TP36CNI..............................212TP36ME...............................210TP36MN..............................210TP36RE................................210TP36REAF...........................211TP36RENF...........................211TP36RN...............................210TP36RNAF ..........................211TP36RNNF..........................211TP36UP................................219TP42CNI..............................212TP42ME...............................210TP42MN..............................210TP42RE................................210TP42REAF...........................211TP42RENF...........................211TP42RN...............................210TP42RNAF ..........................211TP42RNNF..........................211TP42UP................................219TP48CNI..............................212TP48ME...............................210TP48MN..............................210TP48RE................................210TP48REAF...........................211TP48RENF...........................211TP48RN...............................210TP48RNAF ..........................211TP48RNNF..........................211TP48UP................................219TP60CNI..............................212TP60MN..............................210TP60RN...............................210TP60RNAF ..........................211TP60RNNF..........................211TP60UP................................219TR03024................................30TR03030................................30TR03036................................30TR03042................................30TR03048................................30TR03060................................30TR04324................................30TR04330................................30TR04336................................30TR04342................................30TR04348................................30TR04360................................30TR05624................................30TR05630................................30TR05636................................30TR05642................................30TR05648................................30TR05660................................30TR06924................................31TR06930................................31TR06936................................31TR06942................................31TR06948................................31TR06960................................31TR08224................................31TR08230................................31TR08236................................31TR08242................................31TR08248................................31TR14320E............................278TR14320M ..........................278TR15620E............................278TR15620M ..........................278TR16920E............................278TR16920M ..........................278TR16924GP...........................35TR16930GP...........................35TR16936GP...........................35TR18242D.............................31TR313BP................................42TR313CP ...............................42TR313EF................................45TR313EP................................43TR313HF...............................44TR313HP...............................41TR313LF................................44TR313LP................................40TR313SF................................45TR313SP................................41TR313TF ...............................44TR313TP ...............................40TR313WP ..............................43TR313XF...............................44TR313XP...............................40TR317EF................................45TR317EP................................43TR317LF................................44TR317LP................................40TR317SF................................45TR317SP................................41TR317TF ...............................44TR317TP ...............................40TR326BP................................42TR326CP ...............................42TR326EF................................45TR326EP................................43TR326HF...............................44TR326HP...............................41TR326LF................................44TR326LP................................40TR326SF................................45TR326SP................................41TR326TF ...............................44TR326TP ...............................40TR326WP ..............................43TR326XF...............................44TR326XP...............................40TR330BP................................42TR330CP ...............................42TR330EF................................45TR330EP................................43TR330LF................................44TR330LP................................40TR330SF................................45TR330SP................................41TR330TF ...............................44TR330TP ...............................40TR330WP ..............................43TR330XF...............................44TR330XP...............................40TR339BP................................42TR339CP ...............................42TR339EF................................45TR339EP................................43TR339HF...............................44TR339HP...............................41TR339LF................................44TR339LP................................40TR339SF................................45TR339SP................................41TR339TF ...............................44TR339TP ...............................40TR343BP................................42TR343CP ...............................42TR343EF................................45TR343EP................................43TR343LF................................44TR343LP................................40TR343SF................................45TR343SP................................41TR343TF ...............................44TR343TP ...............................40TR343WP ..............................43TR343XF...............................44TR343XP...............................40TR356BP................................42TR356CP ...............................42TR356EF................................45TR356EP................................43TR356LF................................44TR356LP................................40TR356SF................................45TR356SP................................41TR356TF ...............................44TR356TP ...............................40TR356WP ..............................43TR356XF...............................44TR356XP...............................40TR369BP................................42TR369CP ...............................42TR369EF................................45TR369EP................................43TR369LF................................44TR369LP................................40TR369SF................................45TR369SP................................41TR369TF ...............................44TR369TP ...............................40TR369WP ..............................43by Model NumberModelPageTR369XF...............................44TR369XP...............................40TR382BP................................42TR382CP ...............................42TR382EF................................45TR382EP................................43TR382LF................................44TR382LP................................40TR382SF................................45TR382SP................................41TR382TF ...............................44TR382TP ...............................40TR382WP ..............................43TR382XF...............................44TR382XP...............................40TR3MP ..................................54TR51524S............................190TR51530S............................190TR51536S............................190TR51542S............................190TR51548S............................190TR51554S............................190TR51560S............................190TR51566S............................190TR51572S............................190TR52424C ...........................191TR52424Q...........................179TR53030C ...........................191TR53030CSB .......................192TR53030Q...........................179TR53636C ...........................191TR53636CSB .......................192TR54242CSB .......................192TR54848CSB .......................192TRDMK30.............................33TRDMK36.............................33TRDMK42.............................33TRDMK48.............................33TRV51524S..........................190TRV51530S..........................190TRV51536S..........................190TRV51542S..........................190TRV51548S..........................190TRV51554S..........................190TRV51560S..........................190TRV51566S..........................190TRV51572S..........................190TRV52424C.........................191TRV52424Q ........................179TRV53030C.........................191TRV53030CSB.....................192TRV53030Q ........................179TRV53636C.........................191TRV53636CSB.....................192TRV54242CSB.....................192TRV54848CSB.....................192TRW51524S.........................190TRW51530S.........................190TRW51536S.........................190TRW51542S.........................190TRW51548S.........................190TRW51554S.........................190TRW51560S.........................190TRW51566S.........................190TRW51572S.........................190TRW52424C........................191TRW52424Q .......................179TRW53030C........................191TRW53030CSB....................192TRW53030Q .......................179TRW53636C........................191TRW53636CSB....................192TRW54242CSB....................192TRW54848CSB....................192TSPIB-242............................313TSPIB-243............................313TSPIB-302............................313TSPIB-303............................313TSPMS-242..........................313TSPMS-243..........................313TSPMS-24B..........................313TSPMS-302..........................313TSPMS-303..........................313OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 351

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESCross Reference IndexModel Page Model Page Model Page Model PageTSPMS-30B..........................313TT01320........................34, 278TT01324................................34TT01330................................34TT01336................................34TT01342................................34TT01348................................34TT01360................................34TT02624................................34TT02630................................34TT02636................................34TT02642................................34TT02648................................34TT02660................................34TT03024................................30TT03030................................30TT03036................................30TT03042................................30TT03048................................30TT03060................................30TT04324................................30TT04330................................30TT04336................................30TT04342................................30TT04348................................30TT04360................................30TT05624................................30TT05630................................30TT05636................................30TT05642................................30TT05648................................30TT05660................................30TT06924................................31TT06930................................31TT06936................................31TT06942................................31TT06948................................31TT06960................................31TT08224................................31TT08230................................31TT08236................................31TT08242................................31TT08248................................31TT14320E............................278TT14320M ..........................278TT15620E............................278TT15620M ..........................278TT16920E............................278TT16920M ..........................278TT16924GP ...........................35TT16930GP ...........................35TT16936GP ...........................35TT16942SD ...................33, 101TT18242D .............................31TT18242SD ...................33, 101TT220S ..........................34, 278TT224AD...............................56TT224AS................................56TT224S ..................................34TT230AD...............................56TT230AS................................56TT230S ..................................34TT236AD...............................56TT236AS................................56TT236S ..................................34TT242AD...............................56TT242AS................................56TT242S ..................................34TT248AD...............................56TT248AS................................56TT248S ..................................34TT260AD...............................56TT260AS................................56TT260S ..................................34TT313A .................................37TT313B..................................38TT313C .................................38TT313E..................................39TT313L..................................36TT313LS................................36TT313S ..................................37TT313T..................................36TT313W ................................39TT313X .................................37TT326A .................................37TT326B..................................38TT326C .................................38TT326E..................................39TT326L..................................36TT326LS................................36TT326S ..................................37TT326T..................................36TT326W ................................39TT326X .................................37TT330B..................................38TT330C .................................38TT330E..................................39TT330L..................................36TT330LS................................36TT330S ..................................37TT330T..................................36TT330W ................................39TT330X .................................37TT339B..................................38TT339C .................................38TT339E..................................39TT339L..................................36TT339LS................................36TT339S ..................................37TT339T..................................36TT343A .................................37TT343B..................................38TT343C .................................38TT343E..................................39TT343L..................................36TT343LS................................36TT343S ..................................37TT343T..................................36TT343W ................................39TT343X .................................37TT356A .................................37TT356B..................................38TT356C .................................38TT356E..................................39TT356L..................................36TT356LS................................36TT356S ..................................37TT356T..................................36TT356W ................................39TT356X .................................37TT369A .................................37TT369B..................................38TT369C .................................38TT369E..................................39TT369L..................................36TT369LS................................36TT369S ..................................37TT369T..................................36TT369W ................................39TT369X .................................37TT382A .................................37TT382B..................................38TT382C .................................38TT382E..................................39TT382L..................................36TT382LS................................36TT382S ..................................37TT382T..................................36TT382W ................................39TT382X .................................37TT3MP ..................................54TT41320FD ...........................70TT41320FQ...........................73TT41320FS ............................67TT41320NHS ........................74TT41320PS ............................72TT41320SM...........................68TT41320SMP.........................71TT41320SP ............................69TT41320T..............................57TT41320V .............................76TT41324A .............................58TT41324E..............................59TT41324FD ...........................70TT41324FQ...........................73TT41324FS ............................67TT41324G .............................63TT41324GK...........................62TT41324GS ...........................63TT41324M ............................65TT41324NHS ........................74TT41324NML .......................65TT41324P..............................64TT41324PS ............................72TT41324SM...........................68TT41324SMP.........................71TT41324SP ............................69TT41324SW...................66, 329TT41324T..............................57TT41324V .............................76TT41324VE ...........................77TT41330A .............................58TT41330E..............................59TT41330FD ...........................70TT41330FQ...........................73TT41330FS ............................67TT41330G .............................63TT41330GK...........................62TT41330GS ...........................63TT41330M ............................65TT41330NHS ........................74TT41330NML .......................65TT41330P..............................64TT41330PS ............................72TT41330SM...........................68TT41330SMP.........................71TT41330SP ............................69TT41330SW...................66, 329TT41330T..............................57TT41330V .............................76TT41330VE ...........................77TT41336A .............................58TT41336E..............................59TT41336FD ...........................70TT41336FQ...........................73TT41336FS ............................67TT41336G .............................63TT41336GK...........................62TT41336GS ...........................63TT41336M ............................65TT41336NHS ........................74TT41336NML .......................65TT41336P..............................64TT41336PS ............................72TT41336SM...........................68TT41336SMP.........................71TT41336SP ............................69TT41336SW...................66, 329TT41336SWF.......................281TT41336T..............................57TT41336V .............................76TT41336VE ...........................77TT41342A .............................58TT41342E..............................59TT41342FD ...........................70TT41342FQ...........................73TT41342FS ............................67TT41342G .............................63TT41342GK...........................62TT41342GS ...........................63TT41342M ............................65TT41342NHS ........................74TT41342NML .......................65TT41342P..............................64TT41342PS ............................72TT41342SM...........................68TT41342SMP.........................71TT41342SP ............................69TT41342SW...................66, 329TT41342SWF.......................281TT41342T..............................57TT41342V .............................76TT41342VE ...........................77TT41348A .............................58TT41348E..............................59TT41348FD ...........................70TT41348FQ...........................73TT41348FS ............................67TT41348G .............................63TT41348GK...........................62TT41348GS ...........................63TT41348M ............................65TT41348NHS ........................74TT41348NML .......................65TT41348P..............................64TT41348PS ............................72TT41348SM...........................68TT41348SMP.........................71TT41348SP ............................69TT41348SW...................66, 329TT41348SWF.......................281TT41348T..............................57TT41348V .............................76TT41348VE ...........................77TT41360A .............................58TT41360E..............................59TT41360FD ...........................70TT41360FQ...........................73TT41360FS ............................67TT41360G .............................63TT41360GK...........................62TT41360GS ...........................63TT41360M ............................65TT41360NHS ........................74TT41360NML .......................65TT41360P..............................64TT41360PS ............................72TT41360SM...........................68TT41360SMP.........................71TT41360SP ............................69TT41360SW...................66, 329TT41360T..............................57TT41360V .............................76TT41360VE ...........................77TT42620FD ...........................70TT42620FQ...........................73TT42620FS ............................67TT42620NHS ........................74TT42620PS ............................72TT42620SM...........................68TT42620SMP.........................71TT42620SP ............................69TT42620T..............................57TT42620V .............................76TT42624A .............................58TT42624FD ...........................70TT42624FQ...........................73TT42624FS ............................67TT42624G .............................63TT42624GK...........................62TT42624GS ...........................63TT42624M ............................65TT42624NHS ........................74TT42624NML .......................65TT42624P..............................64TT42624PS ............................72TT42624SM...........................68TT42624SMP.........................71TT42624SP ............................69TT42624T..............................57TT42624V .............................76TT42624VE ...........................77TT42630A .............................58TT42630FD ...........................70TT42630FQ...........................73TT42630FS ............................67TT42630G .............................63TT42630GK...........................62TT42630GS ...........................63TT42630M ............................65TT42630NHS ........................74TT42630NML .......................65TT42630P..............................64TT42630PS ............................72TT42630SM...........................68TT42630SMP.........................71TT42630SP ............................69TT42630T..............................57TT42630V .............................76TT42630VE ...........................77TT42636A .............................58TT42636FD ...........................70by Model NumberModelPageTT42636FQ...........................73TT42636FS ............................67TT42636G .............................63TT42636GK...........................62TT42636GS ...........................63TT42636M ............................65TT42636NHS ........................74TT42636NML .......................65TT42636P..............................64TT42636PS ............................72TT42636SM...........................68TT42636SMP.........................71TT42636SP ............................69TT42636T..............................57TT42636V .............................76TT42636VE ...........................77TT42642A .............................58TT42642FD ...........................70TT42642FQ...........................73TT42642FS ............................67TT42642G .............................63TT42642GK...........................62TT42642GS ...........................63TT42642M ............................65TT42642NHS ........................74TT42642NML .......................65TT42642P..............................64TT42642PS ............................72TT42642SM...........................68TT42642SMP.........................71TT42642SP ............................69TT42642T..............................57TT42642V .............................76TT42642VE ...........................77TT42648A .............................58TT42648FD ...........................70TT42648FQ...........................73TT42648FS ............................67TT42648G .............................63TT42648GK...........................62TT42648GS ...........................63TT42648M ............................65TT42648NHS ........................74TT42648NML .......................65TT42648P..............................64TT42648PS ............................72TT42648SM...........................68TT42648SMP.........................71TT42648SP ............................69TT42648T..............................57TT42648V .............................76TT42648VE ...........................77TT42660A .............................58TT42660FD ...........................70TT42660FQ...........................73TT42660FS ............................67TT42660G .............................63TT42660GK...........................62TT42660GS ...........................63TT42660M ............................65TT42660NHS ........................74TT42660NML .......................65TT42660P..............................64TT42660PS ............................72TT42660SM...........................68TT42660SMP.........................71TT42660SP ............................69TT42660T..............................57TT42660V .............................76TT42660VE ...........................77TT43920T..............................57TT43924A .............................58TT43924T..............................57TT43930A .............................58TT43930T..............................57TT43936A .............................58TT43936T..............................57TT43942A .............................58TT43942T..............................57TT43948A .............................58TT43948T..............................57TT44320V .............................76TT44324V .............................76352 | Systems Supplement – 3/2013

Cross Reference IndexModel Page Model Page Model Page Model PageTT44330V .............................76TT44336V .............................76TT44342V .............................76TT44348V .............................76TT4CK1320...........................75TT4CK1324...........................75TT4CK1330...........................75TT4CK1336...........................75TT4CK1342...........................75TT4CK1348...........................75TT4CK1360...........................75TT4CK2620...........................75TT4CK2624...........................75TT4CK2630...........................75TT4CK2636...........................75TT4CK2642...........................75TT4CK2648...........................75TT4CK2660...........................75TT51524S ............................190TT51530S ............................190TT51536S ............................190TT51542S ............................190TT51548S ............................190TT51554S ............................190TT51560S ............................190TT51566S ............................190TT51572S ............................190TT52424C ...........................191TT52424SD .........................180TT53024CB .........................180TT53030C ...........................191TT53030CSB .......................192TT53624CA.........................180TT53624CB .........................180TT53636C ...........................191TT53636CSA.......................192TT53636CSB .......................192TT53660BT .........................173TT53666BT .........................173TT53672BT .........................173TT54224CA.........................180TT54224CB .........................180TT54242CSA.......................192TT54242CSB .......................192TT54824CA.........................180TT54824CB .........................180TT54848CSA.......................192TT54848CSB .......................192TT56024CA.........................180TT56060CSA.......................192TT628SC......................194, 306TT629SC......................194, 306TT6MK................................195TT8MK................................214TT94320T..............................60TT94324E..............................61TT94324T..............................60TT94330E..............................61TT94330T..............................60TT94336E..............................61TT94336T..............................60TT94342E..............................61TT94342T..............................60TT94348E..............................61TT94348T..............................60TT94360E..............................61TT94360T..............................60TT95620T..............................60TT95624E..............................61TT95624T..............................60TT95630E..............................61TT95630T..............................60TT95636E..............................61TT95636T..............................60TT95642E..............................61TT95642T..............................60TT95648E..............................61TT95648T..............................60TT95660E..............................61TT95660T..............................60TT96920T..............................60TT96924E..............................61TT96924T..............................60TT96930E..............................61TT96930T..............................60TT96936E..............................61TT96936T..............................60TT96942E..............................61TT96942T..............................60TT96948E..............................61TT96948T..............................60TT96960E..............................61TT96960T..............................60TTDMK30.............................33TTDMK36.............................33TTDMK42.............................33TTDMK48.............................33TTGAB ..................................63TTGMT ...............................160TTHK2 ..................................56TTHK3 ..................................56TTVS2620..............................79TTVS2624..............................79TTVS2630..............................79TTVS2636..............................79TTVS2642..............................79TTVS2648..............................79TTVS2660..............................79TTVS3920..............................79TTVS3924..............................79TTVS3930..............................79TTVS3936..............................79TTVS3942..............................79TTVS3948..............................79TTVS3960..............................79TTVS5220..............................80TTVS5224..............................80TTVS5230..............................80TTVS5236..............................80TTVS5242..............................80TTVS5248..............................80TTVS5260..............................80TTVS6520..............................80TTVS6524..............................80TTVS6530..............................80TTVS6536..............................80TTVS6542..............................80TTVS6548..............................80TTVS6560..............................80TTVS7824..............................81TTVS7830..............................81TTVS7836..............................81TTVS7842..............................81TTVS7848..............................81TTVS7860..............................81TTVS9124..............................81TTVS9130..............................81TTVS9136..............................81TTVS9142..............................81TTVS9148..............................81TTVS9160..............................81TV03024................................30TV03030................................30TV03036................................30TV03042................................30TV03048................................30TV03060................................30TV04324................................30TV04330................................30TV04336................................30TV04342................................30TV04348................................30TV04360................................30TV05624................................30TV05630................................30TV05636................................30TV05642................................30TV05648................................30TV05660................................30TV06924................................31TV06930................................31TV06936................................31TV06942................................31TV06948................................31TV06960................................31TV08224................................31TV08230................................31TV08236................................31TV08242................................31TV08248................................31TV14320E............................278TV14320M ..........................278TV15620E............................278TV15620M ..........................278TV16920E............................278TV16920M ..........................278TV16924GP...........................35TV16930GP...........................35TV16936GP...........................35TV18242D.............................31TV313BP................................47TV313BV...............................52TV313CP ...............................52TV313EF................................49TV313EP................................47TV313EV...............................53TV313HF...............................48TV313HP...............................46TV313HV ..............................51TV313LF................................48TV313LP................................46TV313LV ...............................50TV313SF................................49TV313SP................................47TV313SV ...............................51TV313TF ...............................48TV313TP ...............................46TV313TV...............................50TV313WP ..................47, 49, 53TV313XP...................46, 48, 50TV317EF................................49TV317EP................................47TV317EV...............................53TV317LF................................48TV317LP................................46TV317LV ...............................50TV317SF................................49TV317SP................................47TV317SV ...............................51TV317TF ...............................48TV317TP ...............................46TV317TV...............................50TV326BP................................47TV326BV...............................52TV326CP ...............................52TV326EF................................49TV326EP................................47TV326EV...............................53TV326HF...............................48TV326HP...............................46TV326HV ..............................51TV326LF................................48TV326LP................................46TV326LV ...............................50TV326SF................................49TV326SP................................47TV326SV ...............................51TV326TF ...............................48TV326TP ...............................46TV326TV...............................50TV326WP ..................47, 49, 53TV326XP...................46, 48, 50TV330BP................................47TV330BV...............................52TV330CP ...............................52TV330EF................................49TV330EP................................47TV330EV...............................53TV330LF................................48TV330LP................................46TV330LV ...............................50TV330SF................................49TV330SP................................47TV330SV ...............................51TV330TF ...............................48TV330TP ...............................46TV330TV...............................50TV330WP ..................47, 49, 53TV330XP...................46, 48, 50TV339BP................................47TV339BV...............................52TV339CP ...............................52TV339EF................................49TV339EP................................47TV339EV...............................53TV339HF...............................48TV339HP...............................46TV339HV ..............................51TV339LF................................48TV339LP................................46TV339LV ...............................50TV339SF................................49TV339SP................................47TV339SV ...............................51TV339TF ...............................48TV339TP ...............................46TV339TV...............................50TV343BP................................47TV343BV...............................52TV343CP ...............................52TV343EF................................49TV343EP................................47TV343EV...............................53TV343LF................................48TV343LP................................46TV343LV ...............................50TV343SF................................49TV343SP................................47TV343SV ...............................51TV343TF ...............................48TV343TP ...............................46TV343TV...............................50TV343WP ..................47, 49, 53TV343XP...................46, 48, 50TV356BP................................47TV356BV...............................52TV356CP ...............................52TV356EF................................49TV356EP................................47TV356EV...............................53TV356LF................................48TV356LP................................46TV356LV ...............................50TV356SF................................49TV356SP................................47TV356SV ...............................51TV356TF ...............................48TV356TP ...............................46TV356TV...............................50TV356WP ..................47, 49, 53TV356XP...................46, 48, 50TV369BP................................47TV369BV...............................52TV369CP ...............................52TV369EF................................49TV369EP................................47TV369EV...............................53TV369LF................................48TV369LP................................46TV369LV ...............................50TV369SF................................49TV369SP................................47TV369SV ...............................51TV369TF ...............................48TV369TP ...............................46TV369TV...............................50TV369WP ..................47, 49, 53TV369XP...................46, 48, 50TV382BP................................47TV382BV...............................52TV382CP ...............................52TV382EF................................49TV382EP................................47TV382EV...............................53TV382LF................................48TV382LP................................46TV382LV ...............................50TV382SF................................49TV382SP................................47TV382SV ...............................51TV382TF ...............................48TV382TP ...............................46by Model NumberModelPageTV382TV...............................50TV382WP ..................47, 49, 53TV382XP...................46, 48, 50TV51524S............................190TV51530S............................190TV51536S............................190TV51542S............................190TV51548S............................190TV51554S............................190TV51560S............................190TV51566S............................190TV51572S............................190TV52424C ...........................191TV52424Q...........................179TV52424S............................170TV52424SD .........................180TV52430S............................170TV52436S............................170TV52442S............................170TV52448S............................170TV52454S............................170TV52460S............................170TV52466S............................170TV52472S............................170TV52478S............................170TV52484S............................170TV52490S............................170TV52496S............................170TV524D...............................179TV5302430W ......................172TV53024CB.........................180TV53024S............................171TV5303024W ......................172TV53030C ...........................191TV53030CSB .......................192TV53030Q...........................179TV53030S............................171TV53036S............................171TV53042S............................171TV53048S............................171TV53054S............................171TV53060B............................176TV53060S............................171TV53066B............................176TV53066S............................171TV53072B............................176TV53072PL..........................176TV53072PR .........................176TV53072S............................171TV53078S............................171TV53084S............................171TV53090S............................171TV53096S............................171TV530D...............................179TV5362430W ......................172TV53624C ...........................174TV53624CA.........................180TV53624CB.........................180TV53624CR.........................174TV5363024W ......................172TV53636C ...........................191TV53636CS .........................193TV53636CSA.......................192TV53636CSB .......................192TV53660B............................176TV53660BT .........................173TV53662CL.........................178TV53662CR.........................178TV53666B............................176TV53666BT .........................173TV53672B............................176TV53672BT .........................173TV53722CL.........................178TV53722CR.........................178TV5422430W ......................172TV54224C ...........................174TV54224CA.........................180TV54224CB.........................180TV54224CR.........................174TV5423024W ......................172TV54230C ...........................174TV54230CR.........................174TV54242CS .........................193OVERHEADS & HUTCHESREACH PERSONAL STORAGE SHARED STORAGE EXTENSIONS APPENDIX & INDEXSystems Supplement – 3/2013 allsteeloffice.com | 353

APPENDIX & INDEX EXTENSIONSSHARED STORAGEPERSONAL STORAGEREACHOVERHEADS & HUTCHESCross Reference IndexModel Page Model Page Model Page Model Page Model PageTV54242CSA.......................192TV54242CSB .......................192TV54662JL ..........................176TV54662JR..........................176TV54663CL.........................178TV54663CR.........................178TV54663JL ..........................176TV54663JR..........................176TV547221BL .......................177TV547221BR.......................177TV547229BL .......................177TV547229BR.......................177TV54722JL ..........................176TV54722JR..........................176TV54723CL.........................178TV54723CR.........................178TV54723JL ..........................176TV54723JR..........................176TV5482430W ......................172TV54824C ...........................174TV54824CA.........................180TV54824CB.........................180TV54824CR.........................174TV5483024W ......................172TV54830C ...........................174TV54830CR.........................174TV54848CSA.......................192TV54848CSB .......................192TV5542430W ......................172TV5543024W ......................172TV5602430W ......................172TV56024CA.........................180TV5603024W ......................172TV56060CSA.......................192TV5622EL ...........................175TV5622ER...........................175TV5623EL ...........................175TV5623ER...........................175TV5632EL ...........................175TV5632ER...........................175TV5633EL ...........................175TV5633ER...........................175TV5662430W ......................172TV5663024W ......................172TV5722430W ......................172TV5722EL ...........................175TV5722ER...........................175TV5723024W ......................172TV5723EL ...........................175TV5723ER...........................175TV5732EL ...........................175TV5732ER...........................175TV5733EL ...........................175TV5733ER...........................175TV5822EL ...........................175TV5822ER...........................175TV5832EL ...........................175TV5832ER...........................175TV5922EL ...........................175TV5922ER...........................175TV5932EL ...........................175TV5932ER...........................175TW51524S...........................190TW51530S...........................190TW51536S...........................190TW51542S...........................190TW51548S...........................190TW51554S...........................190TW51560S...........................190TW51566S...........................190TW51572S...........................190TW52424C ..........................191TW52424Q..........................179TW52424S...........................170TW52424SD ........................180TW52430S...........................170TW52436S...........................170TW52442S...........................170TW52448S...........................170TW52454S...........................170TW52460S...........................170TW52466S...........................170TW52472S...........................170TW524D..............................179TW5302430W .....................172TW53024CB........................180TW53024S...........................171TW5303024W .....................172TW53030C ..........................191TW53030CSB ......................192TW53030Q..........................179TW53030S...........................171TW53036S...........................171TW53042S...........................171TW53048S...........................171TW53054S...........................171TW53060B...........................176TW53060S...........................171TW53066B...........................176TW53066S...........................171TW53072B...........................176TW53072PL.........................176TW53072PR ........................176TW53072S...........................171TW530D..............................179TW5362430W .....................172TW53624C ..........................174TW53624CB........................180TW53624CR........................174TW5363024W .....................172TW53636C ..........................191TW53636CS ........................193TW53636CSB ......................192TW53660B...........................176TW53666B...........................176TW53672B...........................176TW5422430W .....................172TW54224C ..........................174TW54224CB........................180TW54224CR........................174TW5423024W .....................172TW54230C ..........................174TW54230CR........................174TW54242CS ........................193TW54242CSB ......................192TW54662JL .........................176TW54662JR.........................176TW54663CL........................178TW54663CR........................178TW547221BL ......................177TW547221BR......................177TW547229BL ......................177TW547229BR......................177TW54722JL .........................176TW54722JR.........................176TW547231BL ......................177TW547231BR......................177TW547239BL ......................177TW547239BR......................177TW54723CL........................178TW54723CR........................178TW5482430W .....................172TW54824C ..........................174TW54824CB........................180TW54824CR........................174TW5483024W .....................172TW54830C ..........................174TW54830CR........................174TW54848CSB ......................192TW5542430W .....................172TW5543024W .....................172TW5602430W .....................172TW5603024W .....................172TW5622EL ..........................175TW5622ER..........................175TW5623EL ..........................175TW5623ER..........................175TW5632EL ..........................175TW5632ER..........................175TW5633EL ..........................175TW5633ER..........................175TW5662430W .....................172TW5663024W .....................172TW5722430W .....................172TW5722EL ..........................175TW5722ER..........................175TW5723024W .....................172TW5723EL ..........................175TW5723ER..........................175TW5732EL ..........................175TW5732ER..........................175TW5733EL ..........................175TW5733ER..........................175TW5822EL ..........................175TW5822ER..........................175TW5832EL ..........................175TW5832ER..........................175TW5922EL ..........................175TW5922ER..........................175TW5932EL ..........................175TW5932ER..........................175TWSC-29 .....................194, 306TWTH .................................210TWTS...................................199TWTTAK24 .........................199TWTTAK24S .......................199TWTTAK30 .........................199TWTTAK30S .......................199TWTTAK36 .........................199TWTTAK36S .......................199TWTTAK42 .........................199TWTTAK42S .......................199TWTTAK48 .........................199TWTTAK48S .......................199TWTTAK60 .........................199TWTTAK60S .......................199XMANL.......................256, 268XMAP..........................256, 268XMBNL.......................256, 268XMBP ..........................256, 268XMCNL.......................256, 268XMCP..........................256, 268XMDN.........................256, 268XMDP..........................256, 268XMFNL .......................256, 268XMFP ..........................256, 268YFLF230..............................321YFLF236..............................321YFLF242..............................321YFLF330..............................321YFLF336..............................321YFLF342..............................321YFLF430..............................321YFLF436..............................321YFLF442..............................321YFLF530..............................321YFLF536..............................321YFLF542..............................321YH36F .................................220YH36FW..............................220YH42F .................................220YH42FW..............................220YH48F .................................220YH48FW..............................220YH60F .................................220YH60FW..............................220YH66F .................................220YH66FW..............................220YH72F .................................220YH72FW..............................220YIB-242................................310YIB-243................................310YIB-302................................310YIB-303................................310YMS-242..............................310YMS-243..............................310YMS-24B .............................310YMS-302..............................310YMS-303..............................310YMS-30B .............................310YPB29PM ............................314YPF-184L.............................311YPF-184R ............................311YPF-185L.............................311YPF-185R ............................311YPF-186L.............................311YPF-186R ............................311YPST424LBBF .....................312YPST424LFF........................312YPST424RBBF.....................312YPST424RFF .......................312YPST524LBBF .....................312YPST524LFF........................312YPST524RBBF.....................312YPST524RFF .......................312YPSTBS24............................312YPT324LBBFF .....................312YPT324LFFF........................312YPT324RBBFF.....................312YPT324RFFF .......................312YPT424LBBF .......................312YPT424LFF..........................312YPT424RBBF.......................312YPT424RFF .........................312YPT524LBBF .......................312YPT524LFF..........................312YPT524LFFF........................312YPT524RBBF.......................312YPT524RFF .........................312YPT524RFFF .......................312YTB2436..............................221YTB2442..............................221YTB2448..............................221YTB2460..............................221YTB2466..............................221YTB2472..............................221by Model Number354 | Systems Supplement – 3/2013

Systems SupplementPanel FabricsGRADE 1APPOINT Panel a100% PolyesterArtichoke P ................................ APN911Chai P ........................................ APN912Copper A P ............................... APN918Dark Pewter................................. APN917Dune P ....................................... APN915Hummus...................................... APN914Morel A P ................................. APN909Nimbus A P .............................. APN916Turmeric A P ............................ APN910Walnut A P ............................... APN913Celestial E100% PolyesterAlumina...........................................CS918Linen................................................CS928Obelisk.............................................CS922Stargaze............................................CS921Woodsmoke.....................................CS926Zephr...............................................CS914Element a E (formerly Gemini)100% PolyesterFlint............................................... GN965Indigo............................................. GN967Latte A P .................................... GN973Millet A P ................................... GN972Parchment A P ............................ GN953Sea................................................. GN974Veil A P ...................................... GN913Warm Beige A P ......................... GN955Wisp A P .................................... GN975ETCH a100% PolyesterAquatint P ................................. ECH901Crosshatch A ............................. ECH904Engrave A P .............................. ECH902Intaglio A ................................... ECH906Lithograph A P ......................... ECH903Mezzotint..................................... ECH907Woodcut A P ............................ ECH905EXCHANGE a100% PolyesterFlorin........................................... EXG908Franc P ...................................... EXG902Krona........................................... EXG907Lira.............................................. EXG906Riyal P ....................................... EXG901Rupee P ..................................... EXG903Tolar............................................ EXG904IMPRINT a u100% Polyester (57% Recycled)Celestite........................................ IMP911Fossil............................................. IMP910Glacier.......................................... IMP902Mineral......................................... IMP905Neolith.......................................... IMP907Shell.............................................. IMP901GRADE 1 – continuedLUCY a100% Recycled PolyesterAspen.............................................. LC932Cornsilk A E P ........................... LC930Dusk A E P ................................ LC922Fawn............................................... LC933Graphite.......................................... LC934Mist E ........................................... LC920Neutra A E P ............................. LC924Pewter............................................. LC935Snowdrop E P ............................ LC928REFLECTIONS a100% Recycled PolyesterBamboo......................................... REF926Loggia A P ................................. REF921Mistral A P ................................ REF928Moonstone A P ......................... REF923Pewter A P ................................. REF922Stainless A P .............................. REF924Vanilla A P ................................ REF925Winter........................................... REF927REFUGE a ‡65% Recycled Polyester36% PolyesterArtesian P ...................................RFG996Dune A P ...................................RFG992Frost †..........................................RFG993Hemp A .......................................RFG997Mineral A P ...............................RFG998Sandbar.........................................RFG995Tidal A P ...................................RFG994SARTO a E100% Polyester (45% Recycled)Ash A P ..................................... SRT988Desert P ...................................... SRT933Earth P ....................................... SRT937Lemongrass P ............................. SRT949Meadow P .................................. SRT925Mist P ......................................... SRT945Mushroom A P .......................... SRT976Oyster A P ................................. SRT918Reef A P .................................... SRT964Sesame P ..................................... SRT993Shale P ........................................ SRT952Sisal P ......................................... SRT929Wheat P ...................................... SRT913Tango100% PolyesterAficionado......................................TG994Azul................................................TG993Bongo..............................................TG980Dip..................................................TG982Palma..............................................TG991Pecan...............................................TG985Pistachio..........................................TG986Playa...............................................TG933Salsa................................................TG987Sol...................................................TG992Tequila............................................TG990TEMPEST100% Recycled PolyesterDragonfly A E P .........................TP930Frost................................................TP915Full Steam A E P .........................TP980Ginger..............................................TP925Gold Rush A E P ........................TP910Sandstorm E ...................................TP950Tumbleweed A E P .....................TP970Wind Chill E P .............................TP940P Preferred Fabrics.A Everyday Advantage — contact Customer Support for a current list of fabricsavailable in Everyday Advantage.E Express Solutions — contact Customer Support for a current list of fabricsavailable in Express Solutions.GRADE 2Coast a †100% Antimony‐Free PolyesterDune............................................COA903Fjord............................................COA905Headlands P ..............................COA910Humus.........................................COA907Marsh..........................................COA902Shoal P ......................................COA901Silt................................................COA906Tide P ........................................COA908Tombolo......................................COA909Heirloom a100% Antimony‐Free PolyesterDesert.......................................... HLM904Mist............................................ HLM903Muslin......................................... HLM902Pewter......................................... HLM905White †......................................HLMWITJet Set a100% Recycled PolyesterBali A ............................................ JST901Belize.............................................. JST904Bogota............................................ JST902Dubai............................................. JST910Fiji................................................. JST907Marrakesh...................................... JST909Monaco.......................................... JST905Riviera A ...................................... JST908Saigon............................................ JST906Zurich............................................ JST903Lido D u100% Recycled PolyesterBryce Canyon.................................LD9DBHeartland...................................... LD9DHHermosa........................................LD9DKHuntington.....................................LD9DJHuron............................................LD9DUSmith Point.................................... LD9DPYellowstone...................................LD9DYMica a100% Recycled PolyesterAnthracite................................... MCA911Breeze.......................................... MCA918Bronze......................................... MCA913Buff............................................. MCA914Cremini....................................... MCA917Crystal †....................................MCAWITDew............................................ MCA920Dove........................................... MCA912Fresh........................................... MCA916Mineral....................................... MCA915Nectar......................................... MCA919Shale........................................... MCA910STAGGER a60% Virgin Polyester,40% Antimony‐Free PolyesterChalk............................................SGR901Coast.............................................SGR907Gild...............................................SGR904Ivory.............................................SGR902Mask.............................................SGR905Shelter...........................................SGR906Shore.............................................SGR903Tender...........................................SGR908TASANEE a E u100% PolyesterBirch.............................................TSN936Cinder...........................................TSN959Citrus............................................TSN987Cumin...........................................TSN998Feather..........................................TSN924Frost.............................................TSN951Pebble...........................................TSN948Silk................................................TSN912Water............................................TSN963Willow..........................................TSN975Trace a100% Antimony‐Free PolyesterAlabaster...................................... TRC904Cobblestone................................. TRC905Fog............................................... TRC903Muslin.......................................... TRC902White †....................................... TRCWITGRADE 3BUNGEE D DPLA fabric (100% Polylactide)Blue Steel.........................................BN910Crystal............................................BN930Dusk...............................................BN940Oyster.............................................BN970Pistachio..........................................BN980PROPELLER D DPLA fabric (100% Polylactide)Blue Steel..........................................PL910Sandalwood.....................................PL920Crystal.............................................PL930Dusk................................................PL940Oyster..............................................PL970Sawgrass a † ‡100% PolyesterBamboo........................................SWG904Barley...........................................SWG907Buttermilk....................................SWG901Cattail..........................................SWG906Coastal.........................................SWG903Cologne........................................SWG902Sisal..............................................SWG905ALLSTEEL MATERIALSPARTNERSHIP PROGRAMSee Seating Price List for detailedexplanation of Partnership Program.GRADE 2Pact a † uAloe**..........................................PAC900Azure............................................PAC911Calla**.........................................PAC922Coastal..........................................PAC933Delft..............................................PAC944Dove**.........................................PAC955Dragon..........................................PAC966Eureka...........................................PAC977Fern..............................................PAC988Harour..........................................PAC999Lily................................................PAC910Lime..............................................PAC921Midnight.......................................PAC932Nectar...........................................PAC943Patina............................................PAC954Putty**.........................................PAC965Roast.............................................PAC976Roma............................................PAC987Rubine..........................................PAC998Sketch...........................................PAC909Tanzanite......................................PAC920Taupe**........................................PAC931Toasty**.......................................PAC942**Colors not available on tackboardsGRADE 5Maharam Season100% Polyester (100% Recycled)***Ashlar.......................................... SEM004Creek........................................... SEM002Tortoise........................................ SEM001***Post-Industrial Recycled Solution DyedPolyester.D Discontinued 3/2013D D Discontinued 2/2013a Panel fabric is not available on Persona andEssentials overheads and hutches.† Panel fabric is not available on Concensys.‡ Panel fabric is not available on StrideBenching Fabric Screens.◆ Panel fabric is not available on Involve.

Systems PRICE LIST 2013 MARCH 31Resource CentersAtlantaBostonChicagoDallasNew YorkSan FranciscoSanta MonicaTorontoWashington, DCAllsteel Inc.Muscatine, Iowa 52761-5257©2013 Allsteel Inc.All registered trademarks and trademarks are the property of Allsteel Inc.allsteeloffice.comForm # A8212.A1 (3/13)