fans for atex explosive atmospheres and other applications - Sodeca
fans for atex explosive atmospheres and other applications - Sodeca fans for atex explosive atmospheres and other applications - Sodeca
HTM/ATEXHTM/ATEXMobile long-cased fans withATEX certificationMobile long-cased axial fans with ATEX certificationand CEE ExII2G EEx e explosion-proof motor,CEE ExII2G EEx d or DIP flame-resistant motor,to work in explosive atmospheres.Fan:• Sheet steel thick long casing with aluminium stripin the impeller area in accordance with StandardEN-14986:2006• Impeller made from cast aluminium• Incorporates with inspection hatch• Protection guard against contacts, in accordancewith standard UNE 100250, on both sides• Airflow direction from motor to impellerMotor:• Class F motors, with ball bearings and ATEXcertification, EEx e explosion-proof,EEx d or DIP flame-resistant• Three-phase 230/400V.-50Hz. (up to 5.5CV.) and400/690V.-50Hz. (power over 5.5CV.)• Working temperature: -20ºC.+ 40ºC.EEx “e” mark: II 2 G. EEx eEEx “d” mark: II 2 G. EEx dDIP55 mark: II 3 D. IP55DIP65 mark: II 2 D. IP65Notified authority: L.O.M.ID:LOM3ATEX0157Finish:• Rust retardant with ATEX paint, freeof ferric components, in polyesterresin, polymerised at 190ºC, withprior alkaline degreasing and withphosphate-free pre-treatmentOn request:• Motors with built-in PTC• Special windings for different voltagesand frequencies• ATEX construction for differentcategories• Fans with two-speed motor.• EEx d flame-resistant single-phasemotorsOrder codeHTM/ATEX 35 2T EEx dMobile long-cased axial fansEEx “e” mark: II 2 G. EEx eEEx “d” mark: II 2 G. EEx dDIP55 mark: II 3 D. IP55DIP65 mark: II 2 D. IP65Notified authority: L.O.M.ID:LOM3ATEX0157Impellerdiameter in cm.Number of motor poles2=2900 r/min. 50 Hz4=1400 r/min. 50 HzT=Three-phase EEx-e: Mark:II 2 G. EEx e IIBT3EEx “d” mark:II 2 G. EEx d IIBT5DIP55 mark:II 3 D. IP55DIP65 mark:II 2 D. IP65Technical characteristicsModelSpeed(r/min)Maximum admissiblecurrent (A)230V 400VInstalledpower(kW)Maximumairflow(m 3 /h)Sound Approx. weightpressure level (Kg)dB(A)HTM/ATEX-35-2T 2800 2.15 1.25 0.37 5750 77 13HTM/ATEX-35-4T 1440 0.67 0.38 0.12 3100 59 12HTM/ATEX-40-4T 1450 1.45 0.84 0.25 5100 64 19HTM/ATEX-45-4T 1375 1.99 1.15 0.37 7100 68 22HTM/ATEX-56-4T 1380 3.12 1.80 0.55 11000 72 27HTM/ATEX-63-4T 1410 5.20 3.00 1.10 18300 74 35Acoustic featuresThe specified values are determined according to free field measurements of pressure and sound levels in dB(A) at an equivalent distance oftwice the fan’s span plus the impeller’s diameter, with a minimum of 1.5 m.Sound power Lw(A) spectrum in dB(A) via frequency band in Hz.Model 63 125 250 500 1000 2000 4000 800035-2 42 59 71 79 84 84 80 7335-4 24 41 53 61 66 66 62 5540-4 29 46 58 66 71 71 67 60Model 63 125 250 500 1000 2000 4000 800045-4 33 50 62 70 75 75 71 6456-4 39 56 69 76 81 82 77 7063-4 43 60 73 80 85 86 81 7430
HTM/ATEXDimensions in mmModel A B C D E FHTM-35/ATEX 230 635 420 415 355 489HTM-40/ATEX 320 725 481 450 410 596HTM-45/ATEX 360 750 481 453 460 596HTM-56/ATEX 400 925 594 522 560 726HTM-63/ATEX 430 960 594 522 640 805Characteristics of jet with fan positioned 1 metre away from point 0AccessoriesSee accessories section.INT AR RFT/ RFM PANELS P BTUB BAC31
- Page 2: OURCOMMITMENTTO THEENVIRONMENTSodec
- Page 5 and 6: FANS FOR: NAVAL AND OFF-SHORE APPLI
- Page 7 and 8: FULFILMENT OF STANDARDSSODECA's fan
- Page 10 and 11: Fans for ATEX EXPLOSIVE ATMOSPHERES
- Page 12 and 13: Explosivity values for combustible
- Page 14: HCDF HDFHCDFHDFHCDFHDFHCDF: Axial f
- Page 22 and 23: HC/ATEXCharacteristic curvesQ = Air
- Page 24 and 25: HCH/ATEX HCT/ATEXTechnical characte
- Page 26 and 27: HCH/ATEX HCT/ATEXCharacteristic cur
- Page 28 and 29: HCH/ATEX HCT/ATEXCharacteristic cur
- Page 32 and 33: HPX/ATEXHPX/ATEXCased axial fans wi
- Page 34 and 35: HPX/ATEXCharacteristic curvesQ = Ai
- Page 37 and 38: CPV/ATEXCharacteristic curvesQ = Ai
- Page 39 and 40: CMA/ATEXAcoustic featuresThe specif
- Page 41 and 42: CMP/ATEXCMP/ATEX impellerCentrifuga
- Page 43 and 44: CMP/ATEXDimensions in mmCMP-616..0,
- Page 45 and 46: CMP/AL CJMP/ALCMP/ALCJMP/ALCMP/AL:
- Page 47 and 48: CMR/ATEXCMR/ATEXimpellerRobust cent
- Page 49 and 50: CMR/ATEXCharacteristic CurvesQ = Ai
- Page 52 and 53: CAS/ATEXDimensions in mmCAS/ATEX-12
- Page 54 and 55: CAS/ATEXCharacteristic CurvesQ = Ai
- Page 56 and 57: CA/ATEXAcoustic featuresThe specifi
- Page 58 and 59: HT/ATEXHT/ATEXAxial roof fans with
- Page 60 and 61: HT/ATEXCharacteristic curvesQ = Air
- Page 62 and 63: CHT/ATEX CVT/ATEXAcoustic featuresT
- Page 64 and 65: CHT/ATEX CVT/ATEXCharacteristic cur
- Page 66 and 67: HCT/ATEX HFT/ATEXTechnical characte
- Page 68 and 69: HTPHTPCased high-pressure axial fan
- Page 70 and 71: HTPEXAMPLE OF SELECTIONCharacterist
- Page 72 and 73: HTPCharacteristic curvesQ = Airflow
- Page 74 and 75: HTPCharacteristic curvesQ = Airflow
- Page 76 and 77: HTPCharacteristic curvesQ = Airflow
- Page 78 and 79: HTPCharacteristic curvesQ = Airflow
HTM/ATEXHTM/ATEXMobile long-cased <strong>fans</strong> withATEX certificationMobile long-cased axial <strong>fans</strong> with ATEX certification<strong>and</strong> CEE ExII2G EEx e explosion-proof motor,CEE ExII2G EEx d or DIP flame-resistant motor,to work in <strong>explosive</strong> <strong>atmospheres</strong>.Fan:• Sheet steel thick long casing with aluminium stripin the impeller area in accordance with St<strong>and</strong>ardEN-14986:2006• Impeller made from cast aluminium• Incorporates with inspection hatch• Protection guard against contacts, in accordancewith st<strong>and</strong>ard UNE 100250, on both sides• Airflow direction from motor to impellerMotor:• Class F motors, with ball bearings <strong>and</strong> ATEXcertification, EEx e explosion-proof,EEx d or DIP flame-resistant• Three-phase 230/400V.-50Hz. (up to 5.5CV.) <strong>and</strong>400/690V.-50Hz. (power over 5.5CV.)• Working temperature: -20ºC.+ 40ºC.EEx “e” mark: II 2 G. EEx eEEx “d” mark: II 2 G. EEx dDIP55 mark: II 3 D. IP55DIP65 mark: II 2 D. IP65Notified authority: L.O.M.ID:LOM3ATEX0157Finish:• Rust retardant with ATEX paint, freeof ferric components, in polyesterresin, polymerised at 190ºC, withprior alkaline degreasing <strong>and</strong> withphosphate-free pre-treatmentOn request:• Motors with built-in PTC• Special windings <strong>for</strong> different voltages<strong>and</strong> frequencies• ATEX construction <strong>for</strong> differentcategories• Fans with two-speed motor.• EEx d flame-resistant single-phasemotorsOrder codeHTM/ATEX 35 2T EEx dMobile long-cased axial <strong>fans</strong>EEx “e” mark: II 2 G. EEx eEEx “d” mark: II 2 G. EEx dDIP55 mark: II 3 D. IP55DIP65 mark: II 2 D. IP65Notified authority: L.O.M.ID:LOM3ATEX0157Impellerdiameter in cm.Number of motor poles2=2900 r/min. 50 Hz4=1400 r/min. 50 HzT=Three-phase EEx-e: Mark:II 2 G. EEx e IIBT3EEx “d” mark:II 2 G. EEx d IIBT5DIP55 mark:II 3 D. IP55DIP65 mark:II 2 D. IP65Technical characteristicsModelSpeed(r/min)Maximum admissiblecurrent (A)230V 400VInstalledpower(kW)Maximumairflow(m 3 /h)Sound Approx. weightpressure level (Kg)dB(A)HTM/ATEX-35-2T 2800 2.15 1.25 0.37 5750 77 13HTM/ATEX-35-4T 1440 0.67 0.38 0.12 3100 59 12HTM/ATEX-40-4T 1450 1.45 0.84 0.25 5100 64 19HTM/ATEX-45-4T 1375 1.99 1.15 0.37 7100 68 22HTM/ATEX-56-4T 1380 3.12 1.80 0.55 11000 72 27HTM/ATEX-63-4T 1410 5.20 3.00 1.10 18300 74 35Acoustic featuresThe specified values are determined according to free field measurements of pressure <strong>and</strong> sound levels in dB(A) at an equivalent distance oftwice the fan’s span plus the impeller’s diameter, with a minimum of 1.5 m.Sound power Lw(A) spectrum in dB(A) via frequency b<strong>and</strong> in Hz.Model 63 125 250 500 1000 2000 4000 800035-2 42 59 71 79 84 84 80 7335-4 24 41 53 61 66 66 62 5540-4 29 46 58 66 71 71 67 60Model 63 125 250 500 1000 2000 4000 800045-4 33 50 62 70 75 75 71 6456-4 39 56 69 76 81 82 77 7063-4 43 60 73 80 85 86 81 7430
Change language