fans for atex explosive atmospheres and other applications - Sodeca

More documents

Recommendations

Info

HTMHCharacteristic curvesQ = Airflow in m 3 /h, m 3 /s and cfm.Pe= Static pressure in mm.w.c., Pa and inwg.HTMH-90HTMH-100Validation of the sound pressure according to distanceThe sound level may vary depending on the roof structure.AccessoriesSee accessories sectionINTAETARRFTRT110
HTTALHTTALHTTALOrder code+Mixed (wind + dynamic) roof fanswith adjustable baseRoof fan operating by means of natural convection(due to depression of hot air and the Venturi effect)and with an additional fan to improve the performance.Fan• Adjustable base for roof slopes between 0 and 30%• Built in sheet aluminium with a stainless steel base toprevent corrosion• Impeller made from polyamideMotor:• Single-phase two-speed motors with IE-2efficiency, except lower powers 0.75 kW.• Class F motors with ball bearings,IP55 protection• Three-phase 230/400V – 50 Hz• Max. air temperature to transport:- 25ºC y +60ºCHTTAL 56 4TMixed roof fan withadjustable baseImpeller diameter (cm)Number of motor poles4=1400 r/min. 50 Hz6=900 r/min. 50 HzT= Three-phaseTechnical characteristicsModelSpeed(r/min)Maximum admissiblecurrent (A)230V 400VInstalledpower(kW)Maximumairflow(m 3 /h)Sound pressure Approx. weightlevel(Kg)dB(A)HTTAL-56-4T 1440 4.68 2.70 1.10 11700 72 44.00HTTAL-56-6T 940 2.25 1.30 0.37 7560 61 43.60HTTAL-71-4T 1450 6.06 3.50 1.50 18900 78 56.00HTTAL-71-6T 950 2.96 1.71 0.55 13500 61 55.00Dimensions in mmCharacteristic CurvesModel A B ØCHTTAL-56-4T 360 920x920 570HTTAL-56-6T 360 920x920 570HTTAL-71-4T 460 1150x1150 730HTTAL-71-6T 460 1150x1150 730AccessoriesSee accessories section.INT AR RFT/ RFM PANELS S111
Page 2:
OURCOMMITMENTTO THEENVIRONMENTSodec
Page 5 and 6:
FANS FOR: NAVAL AND OFF-SHORE APPLI
Page 7 and 8:
FULFILMENT OF STANDARDSSODECA's fan
Page 10 and 11:
Fans for ATEX EXPLOSIVE ATMOSPHERES
Page 12 and 13:
Explosivity values for combustible
Page 14:
HCDF HDFHCDFHDFHCDFHDFHCDF: Axial f
Page 22 and 23:
HC/ATEXCharacteristic curvesQ = Air
Page 24 and 25:
HCH/ATEX HCT/ATEXTechnical characte
Page 26 and 27:
HCH/ATEX HCT/ATEXCharacteristic cur
Page 28 and 29:
HCH/ATEX HCT/ATEXCharacteristic cur
Page 30 and 31:
HTM/ATEXHTM/ATEXMobile long-cased f
Page 32 and 33:
HPX/ATEXHPX/ATEXCased axial fans wi
Page 34 and 35:
HPX/ATEXCharacteristic curvesQ = Ai
Page 37 and 38:
CPV/ATEXCharacteristic curvesQ = Ai
Page 39 and 40:
CMA/ATEXAcoustic featuresThe specif
Page 41 and 42:
CMP/ATEXCMP/ATEX impellerCentrifuga
Page 43 and 44:
CMP/ATEXDimensions in mmCMP-616..0,
Page 45 and 46:
CMP/AL CJMP/ALCMP/ALCJMP/ALCMP/AL:
Page 47 and 48:
CMR/ATEXCMR/ATEXimpellerRobust cent
Page 49 and 50:
CMR/ATEXCharacteristic CurvesQ = Ai
Page 52 and 53:
CAS/ATEXDimensions in mmCAS/ATEX-12
Page 54 and 55:
CAS/ATEXCharacteristic CurvesQ = Ai
Page 56 and 57:
CA/ATEXAcoustic featuresThe specifi
Page 58 and 59:
HT/ATEXHT/ATEXAxial roof fans with
Page 60 and 61: HT/ATEXCharacteristic curvesQ = Air
Page 62 and 63: CHT/ATEX CVT/ATEXAcoustic featuresT
Page 64 and 65: CHT/ATEX CVT/ATEXCharacteristic cur
Page 66 and 67: HCT/ATEX HFT/ATEXTechnical characte
Page 68 and 69: HTPHTPCased high-pressure axial fan
Page 70 and 71: HTPEXAMPLE OF SELECTIONCharacterist
Page 72 and 73: HTPCharacteristic curvesQ = Airflow
Page 82 and 83: HBADimensions in mmHBA-31...50HBA-6
Page 84 and 85: CMP/MARTechnical characteristicsMod
Page 86 and 87: CMP/MARCharacteristic curvesSee pag
Page 88 and 89: CMPITechnical characteristicsModelS
Page 90 and 91: CMPIDimensions in mmCMPI-1435...256
Page 92 and 93: CMP/ATEX CMP/MAR CMPICharacteristic
Page 94 and 95: CMP/ATEX CMP/MAR CMPICharacteristic
Page 96 and 97: CMRGAcoustic featuresThe specified
Page 98 and 99: CMRGDimensions in mmOutletCMR-1031C
Page 101 and 102: CPVCPVCentrifugal anti-corrosive si
Page 103 and 104: CPVDimensions in mmCPV-1160...2160M
Page 105 and 106: CPVCharacteristic curvesQ = Airflow
Page 107 and 108: HTMHTechnical characteristicsModelS
Page 109: HTMHCharacteristic curvesQ = Airflo
Page 113 and 114: HTSOLARDimensions in mmHTSOLAR-45HT
Page 116 and 117: KITS DE SOBREPRESIÓNDimensions in
Page 118 and 119: FANS FORWIND APPLICATIONSCMR/EOL HF
Page 120 and 121: ACCESSORIESINTOn/off safety switche
Page 122 and 123: ACCESSORIESKME - 10KFeatures:• On
Page 124 and 125: ACCESSORIESRIProtection guard for o
Page 126 and 127: ACCESSORIESBDFeatures:• Adapted t
Page 128 and 129: ACCESSORIESAutomatic-closing shutte
Page 130 and 131: 130ACCESSORIESL d1 d2 l d3 d4 d5 d6
Page 132 and 133: ACCESSORIESIntelligent sensors for
Page 134 and 135: Alphabetical index of references. F
Page 136 and 137: OUR PRODUCTSIn-line duct fansAxial
Page 138: Crta. de Berga, km 0.7E-08580 SANT
show all

fans for atex explosive atmospheres and other applications - Sodeca

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?