NTOMX-HHPJ-__-_ Hand-Held Programmer Jack - Lutron

GRAFIK SYSTEMSHand-Held Programmer JackNTOMX-HHPJCOLOR AND FINISH CODESNTOMX-HHPJ-__-_Hand-Held Programmer JackDESCRIPTIONThis jack connects the GR6HHP Hand-Held Programmer toGRAFIK 5000/6000 Systems:• The jack sits on a Wallstation Link that connects to theProcessor Panel.• The Hand-Held Programmer plugs into the jack.rev hhpj-1a 7.27.00Put Hand-Held Programmer Jacks wherever you have Wallstations,so you can plug in the Hand-Held Programmer to adjust scenesand zones “on location.”Standard engravingSPECIFICATIONSPowerOperating voltage: Low-voltage Class 2 (PELV), 32VDC.Key Design Features• Meets IEC 801-2. Tested to withstand 15kV electrostatic dischargewithout damage or memory loss.• Has faceplate that snaps on with no visible means of attachment.System Communications and Capacity• Low-voltage Class 2 (PELV) wiring connects jack to Processor Panel.• As many jacks as you want – Jacks have no address and don’tcount as one of the 32 Wallstations, Control Units, or ControlInterfaces allowed on a Wallstation Link.TerminalsCapacity: Two #18 AWG (1.0mm 2 ).Environment32 - 104°F (0 - 40°C). 90% non-condensing relative humidity.The Jack Connects the Hand-Held Programmer to the SystemGR6-HHP Hand-HeldProgrammerGRAFIK 5000/6000Processor PanelControl UnitControl InterfaceProgrammerJackNTOMX-HHPJHand-HeldProgrammerJackClass 2 (PELV) Wallstation Link® SPECIFICATION SUBMITTALPageJOB NAME:MODEL NUMBERS:JOB NUMBER:

GRAFIK SYSTEMSCOLOR AND FINISH CODESMatte FinishesWhite WHIvoryIVBeigeBEGrayGRBrown BRBlackBLMetal FinishesBright Brass BBBright Chrome BCBright Nickel BNSatin Brass SBSatin Chrome SCSatin Nickel SNAntique Brass QBAntique Bronze QZAnodized AluminumClear CLABlack BLABrass BRADIMENSIONSFront ViewMOUNTINGWALLSTATIONSClass 2 (PELV) wiringSide ViewSpecifications and Mountingrev hhpj-2a 7.27.00Custom Controls, color matching, andengraving available. Pricing and leadtime may vary depending on colors,finishes, and options chosen.DELIVERYShips in 4 to 6 weeks depending onsystem delivery.1 GangU.S. WallboxFaceplateWIRING• Daisy-chain the Hand-Held ProgrammerJack onto the low-voltageClass 2 (PELV) Wallstation Link.• Make all connections in the programerjack’s wallbox. Or in a switchbox or junctionbox with a maximum wire length of 8feet (2.5m) from the link to the jack.• Consult the Processor Panel SpecificationSubmittal for more details.CLASS 2 (PELV)JACK’S WIRE TERMINAL WIRINGCONNECTIONBlack(or white)RedYellowBlue1: Common2: 32VDC3: MUX4: MUX• Two #12 AWG (2.5mm2) conductors.• One shielded, twisted pair #18 AWG (1.0mm 2 ) for data link.• Connect Drain/Shield as shown in Wallstation Wiring.• Do not connect to Ground (Earth) or jack.• Connect the bare drain wires and cut off the outside shield.® SPECIFICATION SUBMITTALPageJOB NAME:MODEL NUMBERS:JOB NUMBER: