Operating Instructions - Snap-on Equipment

Pocket PC Maintenance7. Press the Stop Test button to finish the test. The Finish Test screendisplays, Figure 2G-32.Figure 2G-32: Comm Test Finish Diagnostics Screen8. When the test has completed, remove the loop back tester and selectFinish.✓ Be sure to remove the loop back tester before selecting Finish.If the communications status is Good, reconnect the communication/serial cable tothe FGA. The system should be working.— If you continue to experience communication problems with the FGAeven though the Comm Test is good, check the FGA operator’smanual for a possible FGA problem.— If problems still occur, charge the FGA for 24 hours and repeat thetest.2G-25