Operating Instructions - Snap-on Equipment
Operating Instructions - Snap-on Equipment
Operating Instructions - Snap-on Equipment
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pocket PC MaintenanceTSI / Idle SetupThe TSI / Idle Tests are standardized to ensure that technicians run the test in asimilar manner from vehicle to vehicle. The TSI Test in FGA using the pocket PC isdesigned to run according to the user c<strong>on</strong>figured parameters displayed in the TSI/Idle Setup screen. The pocket PC TSI Test is discussed in TSI Test, page 2D-1.Figure 2G-19: TSI/Idle Setup Screen✓ Defaults are as shown in Figure 2G-19.Idle Test Length—Length of idle speed test in sec<strong>on</strong>ds.Idle Test Max RPM—Maximum RPM allowed during the idle RPM porti<strong>on</strong>of the TSI.Idle Test Min RPM—Minimum RPM allowed during the idle RPM porti<strong>on</strong>of the TSI.High Speed Test Length—Length of high speed test in sec<strong>on</strong>ds.High Speed Max RPM—Maximum RPM allowed during the high speedRPM porti<strong>on</strong> of the TSI.High Speed Min RPM—Minimum RPM allowed during the high speedRPM porti<strong>on</strong> of the TSI.2G-15
Change language