Operating Instructions - Snap-on Equipment
Operating Instructions - Snap-on Equipment
Operating Instructions - Snap-on Equipment
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pocket PC MaintenanceSetupThis secti<strong>on</strong> describes general setup, standards, new NO x sensor, and unitdiagnostics.General SetupGeneral Setup specifies settings for general operati<strong>on</strong> as well as calibrati<strong>on</strong> andTSI/Idle parameters.To operate properly, the FGA gas analyzer and emissi<strong>on</strong>s test must be c<strong>on</strong>figuredusing the Setup window. It is extremely important that you change <strong>on</strong>ly what isneeded, because incorrect setup c<strong>on</strong>figurati<strong>on</strong> adversely affects the analyzer.To begin Setup,1. Tap the Maintenance butt<strong>on</strong> <strong>on</strong> the Main menu.— The Maintenance menu displays.2. Press the Setup butt<strong>on</strong>.— The Setup menu opens.3. Press the General Setup butt<strong>on</strong>.— The General Setup screen opens.Figure 2G-16: General Setup Screen✓ Defaults are as shown in Figure 2G-16.Butt<strong>on</strong>s at the lower edge of the screen include• General• Calibrati<strong>on</strong>• TSI/Idle• Misc2G-11
Change language