Operating Instructions - Snap-on Equipment

Pocket PC Meters/GraphConfiguration Display Setup allows you to set the following items.Chart Time Frame—The number of seconds it takes for the strip chart to plot afull window of traces. At the end of this interval the strip chart begins to scroll rightto left.Screen Color—Sets the background color of the strip chart screen.Y Axis Color—Sets the color of the axis lines, marks and words on the strip chartscreen.Trace Settings Display SetupChoosing the Trace Settings button displays the following screen.Figure 2C-6: Trace Settings Display Setup ScreenTrace Settings Display Setup allows you to set the following items.Trace Selection—The trace selection list box contains all the measurement itemsavailable to display in Manual Meters, Strip Chart and Bar Graph. You cannotmake changes to the Trace Selection list.Order—The Order list contains a subset of the Trace Selection list. It sets theitems you have selected for FGA to display in Manual Meters, Strip Chart and BarGraph and lists them in order from most important to least important.Manual Meters displays a maximum of six meters, Strip Chart displays a maximumof four traces and Bar Graph displays a maximum of four bars. Manual Meters,Strip Chart and Bar Graph display measurement items shown in the Order list,starting at the top, up to their maximum.To add an item to the Order list,1. Select the item in the Trace Selection list.2. Tap the arrow pointing to the Order list.— The item is now displayed in the Order list.To delete an item from the Order list,1. Select the item in the Order list.2. Tap the arrow pointing to the Trace Selection list.— The item is now deleted from the Order list.2C-7