Operating Instructions - Snap-on Equipment
Operating Instructions - Snap-on Equipment
Operating Instructions - Snap-on Equipment
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pocket PC Meters/GraphStrip ChartTo begin the Strip Chart,1. Tap the Meters / Graph butt<strong>on</strong> <strong>on</strong> the main screen.— The Meters / Graph menu opens.Figure 2C-2: Meters / Graph Menu ScreenDCF and HCF: DCF (Diluti<strong>on</strong> Correcti<strong>on</strong> Factor) and HCF (HumidityCorrecti<strong>on</strong> Factor) butt<strong>on</strong>s display at the bottom of the Meters / Graph andAutomatic Tests menus. The butt<strong>on</strong>s read DCF or HCF Off if the correcti<strong>on</strong>factor is turned off, DCF or HCF On if the correcti<strong>on</strong> factor is turned <strong>on</strong>.DCF and HCF settings change TSI results so be sure to set them asneeded before beginning TSI. See Correcti<strong>on</strong> Factors, page 5-3.2. Choose Strip Chart.— The Strip Chart screen opens showing a changing display of currentemissi<strong>on</strong>s values. To set up the Strip Chart display see Display Setup,page 2C-6.The lower edge of the screen c<strong>on</strong>tains four butt<strong>on</strong>s:— Start Recording— Freeze— Pump— Back (Arrow)2C-3
Change language