Operating Instructions - Snap-on Equipment

Pocket PC Software OverviewMain Menu ButtonsButtons provide access to the functions of the gas analyzer and may displaymenus containing further options.Meters/Graphs— Use options to view manual meters, strip chart and bar graph displays.Automatic Tests— Use to perform gas analyzer tests including the Two Speed Idle Test,Idle Only Test and Catalytic Converter Test.Customer/Vehicle— Use to add a new customer, find an existing customer, view/edit acustomer, delete a customer or delete customer vehicle data.Results— Use to view results of gas analyzer tests.Active Customer NameMaintenance— Provides access to diagnostics and setup. Also use to perform gascalibration, leak check, or install a new NO x sensor.Exit— Closes the gas analyzer software program and returns to Windows CE.✓ The chapters of this manual are ordered as shown in the buttons above.The name at the bottom left corner of the Main screen shown in Figure 2A-1indicates that the active customer is the default. If no specific customer informationis entered the FGA assumes a default customer and displays “Default, <strong>Snap</strong>-onFGA” in place of the customer name.Default CustomerFigure 2A-2: Pocket PC Main Display Screen with Default Customer2A-2