Operating Instructions - Snap-on Equipment

PC Results2. Press the Vehicle History button.— The Test Results screen displays.Figure 3F-2: Test Results ScreenThe Test Results screen contains three tabs: Recordings, Single Save and TSI. Oneach tab, the Available Tests list box contains a complete list of previous testsorganized by date and time. To view a previous test, scroll or arrow to highlight thetest and click. After locating the desired test, you can use the print button to sendthe results to the printer.When no active customer/vehicle has been selected, recordings or single savesobtained in Manual Meters or Strip Chart are not permanently stored. Theinformation obtained with no active customer is only stored for a single day.Recordings and single saves are stored temporarily for viewing and printingpurposes, however, when the program is executed, it deletes all temporaryrecordings and single saves that were not obtained on that day.For example, if 15 different recordings and 20 different single saves wereperformed on 9/12/2002 with no active customer/vehicle, those 15 recordings and20 single saves are available to view and print only on 9/12/2002. If FGA is closed(program exited) at day’s end on 9/12/2002 and reopened on 9/13/2002, therecordings and single saves taken the previous day are not available.✓ Pass or Fail indications for Idle or TSI Tests are based on the stateselected under State Standards. See Standards, page 3G-14.3F-2