Infinity Operations Manual (96402,96403, 96406, 96407) - Whip Mix

FIELD SERVICEREPLACEMENT OF THE SSR (Solid State Relay) (PN 96225)1. Remove the lower bottom panel (Figure 2, Page 6).2. Note and record the color and location of each of the four wires on the SSR terminals (Figure 5,Page 24). Remove each of the four wires by pulling straight up on the connecter. DO NOT PULLON THE WIRES.3. Remove the two nuts and screws that hold SSR in place. Lift SSR off the chassis (Figure 5, Page 24).4. Put the new SSR in place on the rear panel. Locate the SSR so that the center terminal will facedownward when the bottom panel is in place.5. Replace the four wires on the SSR (Figure 5, Page 24).6. Replace the lower bottom panel (Figure 2, Page 6).26