Infinity Operations Manual (96402,96403, 96406, 96407) - Whip Mix

OPERATIONSample three stage program(Program with Cooling)HEAT RATE TEMP HOLD TIMESTAGE 1STAGE 210°F (6°C)20°F (11°C)600°F (316°C) 301600°F (871°C) 1:00STAGE 3NO**STAGE 4NO***Though any number may appear, the unit is deactivated when “NO” is selected for the HEAT RATE.To start immediately, press START / STOP.Follow the same programming procedures if a three or four stage program is desired.NOTE: When the temperature is set to a lower temperature than in the previous stage,the furnace ignores the programmed HEAT RATE (except for "NO") and automaticallycools to the pre-set temperature. The time required for the cooling stage isdetermined by the pre-set temperature. The lower the temperature,the more time needed to cool down.NOTE: Press NIGHT / TIME SET (DELAY START) to start an overnight burnout.See SAMPLE ON STAGE PROGRAM to program NIGHT TIME (DELAY START) time.16