User's Manual - Minarik
User's Manual - Minarik
User's Manual - Minarik
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8 InstallationScrew terminal blockConnections to RG51UA drives are made to a screw terminalblock (Figure 4). Using a screwdriver, turn the terminal blockscrew counter-clockwise to open the wire clamp. Turn theterminal block screw clockwise to clamp the wire.Terminal Block ScrewWire ClampFigure 4. Screw Terminal BlockSpade lugsConnections to the RG25U are made to .25 inch (.6 mm)spade lugs on the drive.