User's Manual - Crown Broadcast

2.4 Receiver Frequency SelectionIf you have a transmitter equipped with the receiver option, you will need to set the receivingor incoming frequency.1. With the top cover removed, locate the receiver module and the two switches (labeledSW1 and SW2).Illustration 2–11 Receiver Module Switches2. Use the adjacent chart to set the switches for the desired incoming frequency.3. For frequencies in the Japan FM band, short pins 7&8 on J1 on the receiver card.4. For 75us pre-emphasis short pins 3&4 and 5&6 on J2 of the Receiver card.5. For 50us pre-emphasis short pins 1&2 and 7&8 on J2 of the Receiver card.6. After setting the frequency, replace the top cover and screws.2-8 FM30/FM150/FM300 User’s Manual