<strong>Premier</strong> Personal Design OptionsARefDescriptionFurniture End Next to Wall OptionCustomOptionAdd-onPriceLinen Tower on Base (without Legs) to be placed next to a wall or cabinet (Specify Left, Right orBoth).90per endBunCountry FrenchADresser or Linen Tower to be placed next to wall/cabinet (Specify Left, Right or Both). This makesthe sill flush with the end. The Ball & Claw and Queen Anne legs will have the front leg replacedwith a back leg. The plywood on the end next to the wall will not be stained, painted or glazed.90per endOpen Dresser to be placed next to wall/cabinet (Specify Left, Right or Both). 150per endSkirt Next to Wall/Cabinet OptionVanity, Base, Linen Cabinet, Linen Tower or Base Tower (with skirt) to be placed next to a wall orcabinet (Specify Left or Right).3” Leg & Sill Option (Bun and Country French Style Choices)90per endThis option is available for vanities, linen cabinets .and linen towers and base towers in all <strong>Premier</strong> collections. It doesnot change the cabinet height but adds 1” to the width. The sill is 3/4” high. The legs are 3” high and have a 3 1/2”diameter. Specify “Bun” or “Country French”. Not available on any multi-piece vanity sets.The sill and legs add 1/2” width to each end. Due to this a vanity, linen cabinet or linen tower or base tower with legoptions will have a 1” gap above the sill if placed side by side.For Hickory cabinets, Oak legs will be substituted.Ashford (A) with Prestige (P) doors shown unless stated otherwise.B Bun/Country French legs / sill on Regular Vanity up thru 42” or Linen Cab (4 legs) 305C Bun/Country French legs / sill on Regular Vanity 48” and larger (4 legs) 385BCDBun/Country French legs / sill on Molding Overlay Vanities 48” and larger with extra side molding bysink door - Estate, Fireside, Heirloom, Monterey, Nottingham (6 legs)480E Bun/Country French legs / sill on Breakfront Vanity 5759” Leg Option for Dresser and Open Dressers, Linen Towers and Base TowersDETo choose one of the following options, specify the option on your order.The sill and legs add 1/2” width to each end. Due to this a vanity, linen cabinet or linen tower or base tower with legoptions will have a 1” gap above the sill if placed side by side.For Hickory cabinets, the Square Tapered leg will be Hickory and for Ball & Claw and Queen Anne legs, Oak legs will besubstituted.F, G Ball & Claw Leg Option (from Queen Anne). Change from 9” Queen Anne (K) to 9” Ball & Claw(J). For Ashford and Nottingham Collections.35 perlegF, H Ball & Claw Leg Option (from Square Tapered). Change from 9” Square Tapered (L) to 9” Ball &Claw (J). For Gentry, Heirloom, Lambiere and Monterey Collections.55 perlegG, F Queen Anne Leg Option (from Ball & Claw). Change from 9” Ball & Claw (J) to 9” Queen Anne(K). For Estate and Fireside Collections.Subtract35 perlegG, H Queen Anne Leg Option (from Square Tapered). Change from 9” Square Tapered (L) to 9”Queen Anne (K). For Gentry, Heirloom, Lambiere and Monterey Collections.20 perlegH, F Square Tapered Leg Option (from Ball & Claw). Change from 9” Ball & Claw (J) to 9” SquareTapered Leg (L). For Estate and Fireside Collections.Subtract55 perleg9” Ball &Claw9” QueenAnne9” SquareTaperedH, G Square Tapered Leg Option (from Queen Anne). Change from 9” Queen Anne (K) to 9” SquareTapered Leg (L). For Ashford and Nottingham Collections.31 3/8” Height Option on Square Tapered Leg Dresser VanitiesH, I To change from 33 1/2” tall dresser vanity with 9” square tapered legs (ref. L) to 31 3/8” tall dresservanity with 6 7/8” tall square tapered legs (ref. I).The most common use for this option is with the taller vessel bowls.Subtract20 perleg45FGH6 7/8” SquareTapered33 1/2” 33 1/2”33 1/2”Dresser vanities, Open Dresser vanities, Linentowers, Base towers and Towel Stands use 9”legs.IFor additional Personal DesignOptions see the Designer <strong>Catalog</strong>.31 3/8”42Personalized Cabinetry for Your Bath!
Hardware & Light Globes - Standard and OptionsStyle A Finish: Satin NickelLight Fittings: Satin NickelItem No. RHKNOB-A $8Style P Finish: Antique BrassLight Fittings: BrassItem No. RHKNOB-P $5Style B Finish: WoodLight Fittings: Satin NickelItem No. RHKNOB-B $13Style Q Finish: Antique BrassLight Fittings: BrassDrilling: 3” (76mm)Item No. RHPULL-Q $10Style C Finish: ChromeLight Fittings: ChromeItem No. RHKNOB-C $8Style R Finish: Antique BrassLight Fittings: BrassDrilling: 3” (76mm)Item No. RHPULL-R $10Style D Finish: ChromeLight Fittings: ChromeDrilling: 3” (76mm)Item No. RHPULL-D $10Style S Finish: Antique BrassLight Fittings: BrassItem No. RHKNOB-S $12Style F Finish: Satin NickelLight Fittings: Satin NickelItem No. RHKNOB-F $13Style T Finish: Oil Rubbed BronzeLight Fittings: Oil Rubbed BronzeItem No. RHKNOB-G $8Style G Finish: Oil Rubbed BronzeLight Fittings: Oil Rubbed BronzeItem No. RHKNOB-G $8Style U Finish: Wrought Iron DarkLight Fittings: Oil Rubbed BronzeItem No. RHKNOB-U $15Style H Finish: Oil Rubbed BronzeLight Fittings: Oil Rubbed BronzeDrilling: 2 1/2” (64mm)Item No. RHPULL-H $17Style V Finish: Wrought Iron DarkLight Fittings: Oil Rubbed BronzeDrilling: 3” (76mm)Item No. RHPULL-V $15Style K Finish: Satin NickelLight Fittings: Satin NickelItem No. RHKNOB-K $10Style W Finish: Satin NickelLight Fittings: Satin NickelDrilling: 3” (76mm)Item No. RHPULL-W $15Style L Finish: Satin NickelLight Fittings: Satin NickelDrilling: 3 3/4” (96mm)Item No. RHPULL-L $17Style 2 Finish: BrassLight Fittings: BrassItem No. RHKNOB-2 $10Style M Finish: Satin NickelLight Fittings: Satin NickelDrilling: 3 3/4” (96mm)Item No. RHPULL-M $17Style 3 Finish: ChromeLight Fittings: ChromeItem No. RHKNOB-3 $10Style N Finish: Satin NickelLight Fittings: Satin NickelDrilling: 2 1/2” (64mm)Item No. RHPULL-N $17Style 4 Finish: ChromeLight Fittings: ChromeDrilling: 3 3/4” (96mm)Item No. RHPULL-4 $15Hardware Standards by CollectionThe hardware that is standard for the collection will be stated onpages 4-7 for each collection. The common option of knobs onall doors and drawers will also be stated on pages 4-7 for eachcollection.Hardware Style CodesThe hardware style code is a two position code. The first position isthe Door hardware code. The second position is the Drawer hardwarecode. For example, the standard Hardware Style Code for the GentryCollection is “GH” (which specifies an oil rubbed bronze knob fordoors and an oil rubbed bronze cup pull for the drawers). A HardwareStyle Code of “GG” specifies the oil rubbed bronze knob for all doorsand drawers.Ordering Optional HardwareAny of the above Decorative Hardware can be selected for whatever<strong>Premier</strong> Collection you choose. When you make this choice, thecabinet or furniture items you select will come with the doors anddrawer fronts drilled for the chosen hardware. You must specifythe Hardware Style Code (Example: With Hardware Style 33)when ordering hardware that is non-standard for the collection. Thestandard hardware for each <strong>Premier</strong> collection is listed on page 4-7. Ifyou wish to supply or acquire your hardware from a source other than<strong>Woodpro</strong>, you can choose a “No Holes Drilled Option”.Finish Color for Light Stems and FittingsFinish color for light stems and fittings of mirrored cabinets withbuilt-in lights will automatically match the Hardware Style standardor option chosen. When ordering bath lights or framed mirrors withlights (which do not have hardware) with a finish color different thanthe Collection standard, specify Brass, Chrome, Oil Rubbed Bronze orSatin Nickel. (See the specific Collection, on pages 4-7, for standardLight Finish.) There is no additional charge for Light Fitting Options.Light GlobesThe light globe (one of the following) that is standard for the collectionwill be stated on pages 4-7 for each collection. If you prefer a differentlight globe, than the collection standard, you can choose to stateone of the other light globe options. For example, if Cone Frosted isstandard for the collection you selected and you want Square Frosted,then state: “Square Frosted Globe Option”.Cone Frosted Square Frosted Bell ClearCall 1-888-2WOODPRO (1-888-296-6377) FAX 1-888-962-5332 Visit us at www.woodpro.com43
- Page 1 and 2: 2009 Premier Series CatalogPersonal
- Page 3 and 4: Door Style and Wood Summary by Coll
- Page 5: Premier SeriesAshford, Gentry, Lamb
- Page 8 and 9: Ashford, Gentry, Lambiere, Valencia
- Page 10 and 11: Collection Designs to Fit Your Styl
- Page 13 and 14: Fireside with Prestige Door-DrawerC
- Page 15 and 16: Collection Designs to Fit Your Styl
- Page 17 and 18: Personalized Cabinetry for Your Bat
- Page 19 and 20: How to OrderPersonal Design Options
- Page 21 and 22: 21” deep models arelisted. For 18
- Page 23 and 24: 21” deep models arelisted. For 18
- Page 25 and 26: 18” deep models arelisted. For 15
- Page 27 and 28: 21” deep models arelisted. For 18
- Page 29 and 30: 21” deep models arelisted. For 18
- Page 31 and 32: 21” deep models are listed. For18
- Page 33 and 34: 12” deep models are listed.For 10
- Page 35 and 36: Premier Series Molding Overlay Esta
- Page 38 and 39: Ashford, Gentry, Lambiere, Valencia
- Page 40: Premier Personal Design OptionsBedf
- Page 45 and 46: Replacement PartsAll Prices listed
- Page 47 and 48: Linen Cabinet Features• The crown
- Page 49 and 50: Vanity Tops Quartz TopsQuartz Tops
- Page 51 and 52: Vanity TopsQuartz Tops - Slab Tops,
- Page 53 and 54: Vanity TopsBack Splashes, Custom Wo
- Page 55 and 56: Breakfront Top DimensionsVanity Top
- Page 57 and 58: Handling of Late, Changed & Rush Or
- Page 59 and 60: Product Warranty PolicyVisible Dama
- Page 61 and 62: Sales Aids - Door Samples and Store
- Page 63 and 64: Customer Service and SalesEddy Noll
- Page 65 and 66: Wood CharacteristicsMaple NaturalMa
- Page 67 and 68: ®Order FormFAX your Order Toll Fre
- Page 69 and 70: Primary Wood-ColorsC H E R R YPhoto