DEEP SEA ELECTRONICS PLC - Home Mega Global Solution

16.2 AUTO SYNC SETTINGSGenerator AutoSynchronising SettingsInterface OptionsFunctionThese settings are used to configure the auto synchronisingmode of interfacing to the engine governor and AVR.For details of connections and interface options with governorsand AVRs, please refer to the sections headed Interfacing toGovernors and Interfacing to AVRsInternal Relays – No external interface is fitted and the governoror motorised pot is controlled by the 55x modules own internalrelays.NOTE: - It will be necessary to configure two of themodule relays to provide the required ‘Speed raise’ and‘Speed Lower’ signals.P120 Analogue module – This external interface is used toprovide a DC voltage output to interface with many engine speedgovernors remote speed adjust or load sharing controller inputs.For further information regarding this interface, refer to thesection headed “P120 Analogue governor interface module”.P122 Digital Resistance – This external interface is used toprovide an output, which mimics that of a 2-wire rheostat(variable resistor). For further information regarding thisinterface, refer to the section headed “P122 Digital Resistancemodule”.NOTE:- P122 is included for legacy support of theAutoSync (not loadshare) controllers only.DSE Guide to Synchronising & Load Sharing PART 1 ISSUE5 18/3/04 AM 47