Manual - EDAN USA

H100B Pulse Oximeter User ManualTo use the sensor: Select an appropriate sensor. Apply the sensor as directed, and observe allwarnings and cautions presented in the sensoruser manual. Clean and remove any substances, such as nailpolish, from the application site. Periodically check to ensure that the sensorremains properly positioned on the patient.High ambient light sources that can interfere with theperformance of the sensor are: Surgical lights (especially those with a xenonlight source). Bilirubin lamps. Fluorescent lights. Infrared heating lamps. Direct sunlight.To prevent interference from ambient light, ensure thatthe sensor is properly applied, and cover the sensor sitewith opaque material.If interference due to patient activity presents a problem,try one or more of the following to correct the problem:- 61 -