Manual - EDAN USA
Share Embed Flag
Download ePaper

Manual - EDAN USA

Manual - EDAN USA Manual - EDAN USA

edanusa.com
13.07.2015 Views

H100B Pulse Oximeter User Manualgives a medium alarm. (Make sure the alarm system inmenu is ON.)4.2.5 Higher than Hi Alarm LimitIf the measured SpO 2 or PR value is higher than the HiAlarm (upper alarm limit), the oximeter gives a highalarm.Here we take PR for example:If the measured PR value is higher than the setup PR HiAlarm, the oximeter gives a high alarm (Make surealarm system in menu is ON). A ↑ icon displays near PR,which indicates that the measured value is higher thanthat of PR Hi Alarm, it will synchronously flash withPR value.4.2.6 Lower than Lo Alarm LimitIf the measured SpO 2 or PR value is lower than the LoAlarm (lower alarm limit), the oximeter gives a highalarm.Here we take SpO 2 for example:If the measured SpO 2 value is lower than the set SpO 2Lo Alarm, the oximeter gives a low SpO 2 alarm. (Makesure the Alarm System in menu is ON.)A ↓ icon displays near SpO 2 value, which indicates the- 56 -

H100B Pulse Oximeter User Manualmeasured value is lower than that of SpO 2 Lo Alarm, itwill synchronously flash with SpO 2 value.4.2.7 Alarm SilenceIf alarm system in menu is ON, pressing the alarmsilence button, the audio alarm will be off for the pauseperiod set by the user, but the visual alarm is still active.When the audio alarm is off, press the Alarm Silencebutton to reactivate the audio alarm function.4.2.8 Turning off Alarm SystemAfter the alarm system is turned off, the oximeter cannot give a visual or an audio alarm except for low batteryicon alarm.Set alarm system to ON, the alarm system will be active.It will give an audio alarm and a visual alarm if an alarmoccurs.4.2.9 Alarm PriorityOnly one kind of alarm can be given at once. Forexample, if a medium alarm and a high alarm occur atthe same time, the high alarm will take priority.If the pulse beep and audio alarm sound at the same time,the oximeter will only give an alarm sound.- 57 -

H100B Pulse Oximeter User <strong>Manual</strong>gives a medium alarm. (Make sure the alarm system inmenu is ON.)4.2.5 Higher than Hi Alarm LimitIf the measured SpO 2 or PR value is higher than the HiAlarm (upper alarm limit), the oximeter gives a highalarm.Here we take PR for example:If the measured PR value is higher than the setup PR HiAlarm, the oximeter gives a high alarm (Make surealarm system in menu is ON). A ↑ icon displays near PR,which indicates that the measured value is higher thanthat of PR Hi Alarm, it will synchronously flash withPR value.4.2.6 Lower than Lo Alarm LimitIf the measured SpO 2 or PR value is lower than the LoAlarm (lower alarm limit), the oximeter gives a highalarm.Here we take SpO 2 for example:If the measured SpO 2 value is lower than the set SpO 2Lo Alarm, the oximeter gives a low SpO 2 alarm. (Makesure the Alarm System in menu is ON.)A ↓ icon displays near SpO 2 value, which indicates the- 56 -

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!