Manual - EDAN USA

H100B Pulse Oximeter User Manuallimit of SpO 2 Alarm - 1”. If the value of SpO2Lo Alarm is set to less than 85, it will restoreto 85 after the oximeter is turned on again. Press the Up Arrow or Down Arrow button toincrease or decrease values. SpO 2 Hi Alarm is always higher than SpO 2Lo Alarm by at least 1%. Press the Function button, confirm the alarmrange setup. Press the On/Off button to exit the menu, andreturn to measurement state.3.3.11 PR Alarm SetupThe user can use PR Hi Alarm and PR Lo Alarm inmenu to adjust pulse rate alarm limits.By default, PR Hi Alarm and PR Lo Alarm in Neomode are 200 and 100 respectively; while they are 120and 50 in Adu mode respectively.Set the PR limits as follows: Choose PR Hi Alarm in the menu, press theFunction button to enter setup. The PR HiAlarm box changes from real line to brokenline. The adjustable range of the upper limit of- 46 -