Manual - EDAN USA

H100B Pulse Oximeter User ManualLarge numeric modeThen confirm the selection by pressing the Functionbutton.3.3.2 Patient TypePatient Type can be set to different measurement modes:Adu for Adult or Pediatric patient or Neo for Neonatalpatient.Set Patient Type to Adu or Neo, and confirm it bypressing the Function button.Note:When patient type is changed to Neo, please usethe Neonate SpO 2 Sensor for accuratemeasurement.3.3.3 Alarm VolumeThe Alarm Volume button is used to adjust alarmvolume and its range is from one to five.When Alarm System is setup to ON, if a low alarm, amedium alarm or a high alarm occurs, the oximetersounds beep.3.3.4 Pulse VolumeThe user can turn on or off the pulse volume by pressing- 39 -