Manual - EDAN USA

H100B Pulse Oximeter User Manual1 RSGND The RS232 GND2 LED+ LED drive signal, IR Anode3 LED- LED drive signal, RedAnode4 RXD H100 RS232 RX5 Detector Anode Detector anode6 Connection Detector connection7 AGND Analog GND8 TXD H100 RS232 TX9 Detector Cathode Detector cathode2.4 Powered by BatteryThe oximeter can be powered by four 1.5V LR6 AAalkaline batteries. It will operate for 48 hours when usedfor general operation, or about 24 hours of operationwith the backlight and alarm on.The oximeter can also be powered by the Ni-MHrechargeable battery package.Battery InstallationTo install the alkaline batteries:1. Make sure the oximeter is turned off.2. Press the battery compartment latch and- 24 -