Manual - EDAN USA

H100B Pulse Oximeter User Manual• The sensor is applied to the patient;• The patient’s SpO 2 , Pulse rate are beingreported;• No error conditions exist.4 Wash the probe with clean water afterdisinfecting it to remove any remaining solution.The probe can only be reused after driedthoroughly.5 Do not disinfect the probe with the water boiled.6 Any residue should be removed from the probebefore being disinfected, and avoid contactingcorrosive solvent. Dipping the cable into alcoholor alkalescent solvent for a long time mayreduce the flexibility of the scarfskin of the cable.Also, the connector should not be dipped.7 After monitoring, disinfect the probe accordingto the instruction described in the user manual.8 The materials with which the patient or anyother person can come into contact conformwith the standard of ISO10993.9 The pictures and interfaces in this manual arefor reference only.- 10 -