HM 1400 TRX Total Mercury Analyser - Webshop, Gas Analysis ...

More documents

Recommendations

Info

12. Appendix: Error messages and their elimination12.2 Appendix: Error causes and their eliminationError messages in the event memory1. "Reactor temp. too low/ too high"Description: Violation of lower/upper temperature range limit valueCauses: • Setpoint setting incorrectly programmed Elimination: • Check/correct setpoint input• Temperature limit values incorrectly programmed• Pt100 temperature sensor defective• Energy supply for heating cartridges interrupted• Heating cartridge defective• Check/correct limit value input• Measure temperature at reactor (A6) and compare with display actualvalue, replace Pt100 if necessary• Activate automatic cutout F7 (find cause of F7 tripping)• Replace heating cartridge(s)2. "Probe temp. too low / too high"Description: Violation of lower/upper temperature range limit valueCauses: • Setpoint setting incorrectly programmed Elimination: • Check/correct setpoint input• Temperature limit values incorrectly programmed• Pt100 temperature sensor defective• Energy supply for sampling probe interrupted• High-performance heating cartridge in heated filter of sampling probedefective• Check/correct limit value input• Measure temperature at sampling probe filter and compare with displayactual value, replace Pt100 if necessary• Activate automatic cutout F5 (find cause of F5 tripping)• Hochleistungsheizpatrone ersetzen3. "3-W-V temp. too low / too high"Description: Violation of lower/upper temperature range limit valueCauses: • Temperature limit values incorrectly programmed Elimination: • Check/correct limit value input• Insulating material packed incorrectly• Reactor temperature error • See error elimination under 1.• Open cover of reactor box and check arrangement of insulating elements82 HM 1400 TRX
12. Appendix: Error messages and their elimination4. "Cooler temp. too low / too high"Description: Violation of lower/upper temperature range limit valueCauses: • limit values incorrectly programmed Elimination: • Check/correct limit value input• Temperature setting on measuring gas cooler not correct • Correct temperature setting on measuring gas cooler (see DeviceDescription Part 2)• Pt100 temperature sensor in cooling medium of cooler defective • Measure temperature in cooling medium and compare with display actualvalue, replace Pt100 if necessary• Energy supply for measuring gas cooler interrupted • Activate automatic cutout F6 (find cause of F6 tripping)• Controller module on measuring gas cooler defective • Replace controller module on measuring gas cooler5. "Gas temperature too low / too high"Description: Violation of lower/upper temperature range limit valueCauses: • Temperature limit values incorrectly programmed Elimination: • Check/correct limit value input• Gas sample cooling (gas drying) is not operating correctly • See error elimination under 46. "Probe line temp. too low / too high"Description: Violation of lower/upper temperature range limit valueCauses: • Setpoint setting incorrectly programmed Elimination: • Check/correct setpoint input• Temperature limit values incorrectly programmed • Check/correct limit value input• Pt100 temperature sensor (embedded in the line) defective • Measure temperature in PTFE core of measuring gas line and comparewith display actual value, inform manufacturer / supplier• Energy supply for sampling line interrupted • Activate automatic cutout F4 (find cause of F4 tripping)83 HM 1400 TRX
Page 2 and 3:
Translation of original operating i
Page 4 and 5:
Table of contents5.4.5 Condensate .
Page 7:
0. Foreword0 ForewordThe purpose of
Page 11 and 12:
1. General1 GeneralWe hope that our
Page 13 and 14:
1. General1.3 Limitation of liabili
Page 15:
HM 1400 TRXTotal Mercury Analyser02
Page 18 and 19:
2. SafetyGeneral warning symbolElec
Page 20 and 21:
2. SafetySafety shoesto protect aga
Page 22 and 23:
2. Safety2.7 Hazard from chemicalsC
Page 24 and 25:
2. Safety• Knowledge of system co
Page 27:
HM 1400 TRXTotal Mercury Analyser03
Page 31: HM 1400 TRXTotal Mercury Analyser04
Page 34 and 35: 4. Theoretical foundationsother com
Page 36 and 37: 4. Theoretical foundationsdisplay v
Page 38 and 39: 4. Theoretical foundationsThe coole
Page 44 and 45: 5. Installation5.4.2 Power supply (
Page 47 and 48: 6. Operation6 Operation6.1 Commissi
Page 52 and 53: 7. OperationKey functions:Special k
Page 54 and 55: 7. Operation• Menu item "PASSWORD
Page 56 and 57: 7. OperationFigure 7.4 The Main men
Page 58 and 59: 7. Operation• Menu item "Systemst
Page 60 and 61: 7. Operation• Menu item "Measurin
Page 62 and 63: 7. Operation7.4 Zero offset (automa
Page 64 and 65: 7. OperationIf the key is pressed a
Page 71 and 72: 8. Measuring device check (option)8
Page 73: HM 1400 TRXTotal Mercury AnalyserAp
Page 76 and 77: 10. Appendix:Device parameters in d
Page 78 and 79: 11. Appendix:Maintenance11 Appendix
Page 80 and 81: 11. Appendix:MaintenanceThis mainte
Page 84 and 85: 12. Appendix: Error messages and th
Page 86 and 87: 13. Order numbers for replacement a
Page 88 and 89: Designation Order no. Order no.Incl
Page 90 and 91: 14. Appendix Extracts from safety d
Page 104 and 105: 15. Index15 Index3-W-V 59Accidents
Page 107 and 108: 16. DURAG GROUP company addresses16
show all

HM 1400 TRX Total Mercury Analyser - Webshop, Gas Analysis ...

Create successful ePaper yourself

Delete template?

Save as template?