HM 1400 TRX Total Mercury Analyser - Webshop, Gas Analysis ...

More documents

Recommendations

Info

2. SafetyGeneral warning symbolElectric powerHazardous to theenvironmentChemical burnHot surfaceToxicElectrostaticdevices (ESD)sensitiveTable 2.1: Specific safety symbolsOther symbols usedApart from the warning and safety instructions, the following generalinstructions and associated pictograms are used to draw particularly importantinformation to your attention:Here you will find interesting information or tips on the product and its use.Step by step instructions are indicated by the symbol shown. Make sure thatall steps are carried out in the specified sequence. This includes the stepsthat involve your safety. (e.g. wear protective goggles)Contains information on environmental protectionBefore starting any work, read the operating instructions!2.2 Responsibility of the operating companyThe Total Mercury Analyser is intended for use in commercial operations. Theoperating company of the Total Mercury Analyser is therefore subject to thestatutory health and safety obligations, along with the applicable directives,legislation and standards.In addition to the health and safety instructions contained in these operatinginstructions, the safety regulations, accident prevention regulations and18 HM 1400 TRX
2. Safetyenvironmental protection regulations for the application in which the TotalMercury Analyser is used must be complied with. These specifically include:• The operating company must obtain information about the applicablehealth and safety regulations and perform a risk assessment todetermine any additional hazards that arise due to the special workingconditions at the place of use of the Total Mercury Analyser. He mustconvert these into operating instructions for the operation of the TotalMercury Analyser.• Throughout the period of use of the Total Mercury Analyser, theoperating company must check whether the operating instructions thathe has written satisfy the latest issue of the regulations, and mustupdate them as required.• The operating company must clearly regulate and specify who hasresponsibility for installation, operation, maintenance and cleaning.• The operating company must ensure that all employees who deal withthe Total Mercury Analyser have read and understood the operatinginstructions. In addition, at regular intervals he must train the personneland inform them about the hazards.• Furthermore the operating company is responsible for ensuring that theTotal Mercury Analyser is in a technically fault-free condition at all times,i.e. that the maintenance work has been performed (see section 11).• The operating company must provide the necessary protectiveequipment for the personnel.2.3 Personal protective equipmentDuring work, it may be necessary to wear personal protective equipment tominimise health hazards.Detailed specifications must be set out by the operator depending on thepotential plant-specific hazards.• The protective equipment necessary for the relevant work must be wornat all times.• Do not wear any rings, chains or other jewellery.• Observe any signs relating to personal protective equipment in theworking area.Protective work clothingis tight fitting work clothing with low tear strength, with narrow sleeves and noprotruding parts. It is primarily intended to protect against burns.Protective gogglesto protect the eyes against flying parts and splashed liquids.HM 1400 TRX 19
Page 2 and 3: Translation of original operating i
Page 4 and 5: Table of contents5.4.5 Condensate .
Page 7: 0. Foreword0 ForewordThe purpose of
Page 11 and 12: 1. General1 GeneralWe hope that our
Page 13 and 14: 1. General1.3 Limitation of liabili
Page 15: HM 1400 TRXTotal Mercury Analyser02
Page 20 and 21: 2. SafetySafety shoesto protect aga
Page 22 and 23: 2. Safety2.7 Hazard from chemicalsC
Page 24 and 25: 2. Safety• Knowledge of system co
Page 34 and 35: 4. Theoretical foundationsother com
Page 36 and 37: 4. Theoretical foundationsdisplay v
Page 38 and 39: 4. Theoretical foundationsThe coole
Page 44 and 45: 5. Installation5.4.2 Power supply (
Page 47 and 48: 6. Operation6 Operation6.1 Commissi
Page 52 and 53: 7. OperationKey functions:Special k
Page 54 and 55: 7. Operation• Menu item "PASSWORD
Page 56 and 57: 7. OperationFigure 7.4 The Main men
Page 58 and 59: 7. Operation• Menu item "Systemst
Page 60 and 61: 7. Operation• Menu item "Measurin
Page 62 and 63: 7. Operation7.4 Zero offset (automa
Page 64 and 65: 7. OperationIf the key is pressed a
Page 71 and 72:
8. Measuring device check (option)8
Page 73:
HM 1400 TRXTotal Mercury AnalyserAp
Page 76 and 77:
10. Appendix:Device parameters in d
Page 78 and 79:
11. Appendix:Maintenance11 Appendix
Page 80 and 81:
11. Appendix:MaintenanceThis mainte
Page 82 and 83:
12. Appendix: Error messages and th
Page 84 and 85:
12. Appendix: Error messages and th
Page 86 and 87:
13. Order numbers for replacement a
Page 88 and 89:
Designation Order no. Order no.Incl
Page 90 and 91:
14. Appendix Extracts from safety d
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
15. Index15 Index3-W-V 59Accidents
Page 107 and 108:
16. DURAG GROUP company addresses16
show all

HM 1400 TRX Total Mercury Analyser - Webshop, Gas Analysis ...

Create successful ePaper yourself

Delete template?

Save as template?