MED 96/98/EC QUALITY SYSTEM MODULE D CERTIFICATE - Halton

Page 1 / 3Certificate number: SMS.MED.D/2040/C.0Notified Body N° 0062www.veristar.comMED 96/98/EC QUALITY SYSTEM MODULE D CERTIFICATEThis certificate is issued under the French Maritime Authority, in compliance with the Council Directive 96/98/EC amended by CommissionDirective 2009/26/EC as transposed in the French Regulations, toHALTON OyLahti - FINLANDSummary of the range of the recognition which is detailed in the subsequent page(s):FIRE DAMPERSPENETRATIONS THROUGH 'B' CLASS DIVISIONS: PIPE, DUCT, TRUNK, etc, PENETRATIONSThis certificate is issued to attest that BUREAU VERITAS, notified body number 0062, did undertake, at the above company's request, anassessment of the quality system for production quality assurance related to the equipment of the type described in EC type-examination (ModuleB) certificate(s) listed in the subsequent page(s). BUREAU VERITAS, notified body number 0062, has considered that the quality systemoperated was satisfying the applicable requirements of the Marine Equipment Directive 96/98/EC as amended.This certificate will expire on: 08 Oct 2014For BUREAU VERITAS,At BV HELSINKI, on 07 Oct 2010,Tommy AnderssonThis certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are compliedwith. This certificate is issued within the scope of the General Conditions of BUREAU VERITAS Marine Division available on the internet site www.veristar.com.Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against BUREAU VERITAS for any liability arising outof errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the Society or of itsAgents in establishment or issuance of this document, and in connection with any activities for which it may provide.The electronic version is available at: http://www.veristarpm.com/veristarnb/jsp/viewPublicPdfRecognition.jsp?id=mdyk3upfwlBV Mod. Ad.E 618-D May 2009This certificate consists of 3 page(s)

Page 2 / 3Certificate number: SMS.MED.D/2040/C.0ANNEX1. SCOPEProductsApp. number Date of issue Validity date Item designation Trade name Comment07260/B0 EC 09 Nov 2009 09 Nov 2014 FIREDAMPERS - A.1/3.2209219/B0 EC 09 Nov 2009 09 Nov 2014 FIREDAMPERS - A.1/3.2210809/B3 EC 08 Sep 2010 06 Feb 2013 PENETRATIONSTHROUGH 'B' CLASS DI-VISIONS: PIPE, DUCT,TRUNK, etc, PENETRA-TIONS - A.1/3.27b13962/B0 EC 09 Nov 2009 09 Nov 2014 FIREDAMPERS - A.1/3.2219653/A0 EC 29 Jun 2009 29 Jun 2014 FIREDAMPERS - A.1/3.2220680/A0 EC 29 Jun 2009 29 Jun 2014 FIREDAMPERS - A.1/3.2223182/A0 EC 04 Oct 2010 04 Oct 2015 FIREDAMPERS - A.1/3.22A-Class Round FireDampers, type "FDD",size Ø100 to Ø315 mm.A class - Fire dampertype FDL (Singlebladeand Multiblade FireDamper)Single or double air flowpattern, manual or automatic,ventilating units,types "HMR", "HMF","HMM"Single and Multiblade A-class Fire Damper Type"FDB2"Circular Fire damper typeFDJFire Damper Type FDKA-class fire dampers typeFEXUSCG marking as per US-EC MRAApp. number Trade name USCG marking as per MRA Comment07260/B0 EC A-Class Round Fire Dampers, type"FDD", size Ø100 to Ø315 mm.09219/B0 EC A class - Fire damper type FDL(Singleblade and Multiblade FireDamper)10809/B3 EC Single or double air flow pattern,manual or automatic, ventilatingunits, types "HMR", "HMF", "HMM"13962/B0 EC Single and Multiblade A-class FireDamper Type "FDB2"164.139/EC0062/07260 B0 EC164.139/EC0062/09219 B0 EC164.138/EC0062/10809 B3 EC164.139/EC0062/13962 B0 EC19653/A0 EC Circular Fire damper type FDJ 164.139/EC0062/19653 A0 EC20680/A0 EC Fire Damper Type FDK 164.139/EC0062/20680 A0 EC23182/A0 EC A-class fire dampers type FEX 164.139/EC0062/23182 A0 ECThe electronic version is available at: http://www.veristarpm.com/veristarnb/jsp/viewPublicPdfRecognition.jsp?id=mdyk3upfwlBV Mod. Ad.E 618-D May 2009This certificate consists of 3 page(s)

Page 3 / 3Certificate number: SMS.MED.D/2040/C.02. LIMITATIONSThe EC type-examination certificates listed in the scope are to be valid.Bureau Veritas is to be informed immediately of any modification to the quality system in order to agree on appropriateactions.HALTON Oy has to apply for the periodical audits as agreed with Bureau Veritas.HALTON Oy must draw up a written EC declaration of conformity to type in compliance with the article 10 of the MED96/98/EC.HALTON Oy must affix the mark of conformity in compliance with the article 11 of the MED 96/98/EC taking intoconsideration the following example:0062/xxWhere xx are the last two digits of the year in which the mark is affixed.3. REMARKSThis certificate replaces certificate number SMS.MED.D/2040/B.6*** END OF CERTIFICATE ***The electronic version is available at: http://www.veristarpm.com/veristarnb/jsp/viewPublicPdfRecognition.jsp?id=mdyk3upfwlBV Mod. Ad.E 618-D May 2009This certificate consists of 3 page(s)