Product Specifications - Minitran

TE 7000, Top Efficiency: the Global IT Rack from Rittal.Uncompromisingly geared to the “network” taskBecause the direct route is always best.There’s nothing faster.R

International yardsticksAstonishing solutionsFinished already! The “network specialist” will astound you.Behind this fast problem-solving solution is an internationalbackground, holistic expertise, and the Rittal quality seal.Top-quality – developed to international standards.Cost-effective – inexpensively produced on threecontinents.Fast – available immediately with customer proximity.Solution diversity – thanks to a comprehensive range ofsystem accessories.Cutting costs is a core concept. Rittal TE 7000,Fast distribution: In Germany alone, 22 distribution andlogistics centres provide a quick order service.Fast handling: Outstanding ease of use, a unique spectrumof solutions, comprehensive access, combined with climateand security concepts.This rack is therefore ideally suited for networks in all areas ofindustrial engineering, telecommunications and data communication.Rittal TE 7000 – simple yet convincing! Find your own pathto a solution on the following pages!Top Efficiency.R2 Rittal TE 7000

Rittal TE 7000ContentsRittal TE 7000Page 10 – 11System accessoriesPage 12 – 29Security with CMC-TCPage 29Table of model numbersPage 30Rittal TE 70003

Ready to installThe direct route to a solutionAll components fit perfectly. The dimensions and mountingpoints are tailored to fixed standard dimensions orindividual depth variability of the two mounting levels.Prepared in this way, installation is complete in next to notime.You will be amazed at what can be achieved.The direct route is the fastest. It’s called plug & play!With this in mind, our development strategy is based on theprinciple, “As little as possible, but as much as necessary!”In this way, Rittal has created an outstanding solution.Two 482.6 mm (19˝) mounting levels in the 482.6 mm (19˝)multi-functional profile create a solid framework. Load capacity400 kg!The benefits of this rack without an enclosure frame:Optimum accessibility, maximum use of the interior space,super-fast assembly.4 Rittal TE 7000

Rittal TE 7000TE 7000 conceptThe space miraclewith no enclosure frame.Handling spaceon all sides.Quick-fit assembly:System accessories fordirect mounting withintwo 482.6 mm (19˝) profileframes.The design:Stylish designer doorand handle.Modular roof and base:Cable entry andventilation.Rittal TE 70005

A perfect fitOutstanding at all levelsCheck out the details of the Rittal TE 7000:Three attachment systems offer the maximum opportunitiesfor fast, optimum use of the space.A perfect fit – direct installation on the 482.6 mm (19˝)mounting frame!A perfect fit – the integral TS 8 system punchings!A perfect fit – universal interior installation in depth-variableattachment!There is also a matching range of accessories and systemA single package combines access, climate control andsecurity solutions: Concepts tailored precisely to yourrequirements. Data protection and availability are an absolutemust.Another perfect fit – simple removal and installation ofdoors and side panels, system roof for cable entry and activeventilation, plus system accessories for fast, direct installation.Simple, fast, and cost-effective – the Rittal TE 7000 concept.components for power supply, climate control, and security.6 Rittal TE 7000

Rittal TE 7000Impressive solutiondiversity.Multi-functional profile:A high load capacity offeringversatility at all levels.TS 8 system punchings inthe width and depth:What more could you wishfor in terms of installationopportunities?Two 482.6 mm (19˝)levels:With predefined or variablespacing.Height units:Installation marking foreach individual U.Standard punching:Simply insert the screw andsecure.Rittal TE 70007

Completely individualFlexibility for your requirementsDefined dimensions or variable? Ex works, the fixed dimensionsof the distance between levels offers cost-effective,time-saving installation with system accessories. Readyin a flash, is our motto. Because every dimension and everyattachment point is precisely defined.There are no limits on individual requirements:The front distance and the distances between the two482.6 mm (19˝) levels may be set on a pitch pattern orFor this purpose, as your system supplier, Rittal offers versatilitythrough modular technology. From the base/plinthto the top-mounted fan, from the lock system to the comprehensivesecurity equipment – everything can be achievedwith one-man installation.This leaves you free to concentrate on devising newsolutions.Simply locate the side panels – and voila!flexibly to suit your requirements. Depth-variable installationaccessories help to ensure fast, simple installation.8 Rittal TE 7000

Rittal TE 7000Solution diversity at alllevels.Climate:Active or passive ventilation?One-man assembly:Locate, secure, and voila! –simple, time-saving.CMC security:Central monitoring,comprehensive andcost-effective.Ergoform-S:The handle system withaccess monitoring.Base/plinth modules:For ventilation, for cableentry.Alternatively: Pedestalsand castors.Rittal TE 70009

NetworkingNetwork enclosures TE 7000, width 600T1BHHET2B = WidthT1 = DepthHE = U19˝T2: Mounting distance forpremium accessories,see page 12.Benefits:● Matching premium accessoriesfor rapid installation in thedelivered state● No frame structure, optimumaccessibility● Load capacity up to 400 kgMaterial:Sheet steelSurface finish:Mounting frame: Electrophoreticdipcoat primed, RAL 7044Enclosure panels: Powdercoated, RAL 7035Network enclosures TE 7000U 24 24 42 42 47 47Dimensions in mm482.6 mm (19˝) distance between levels in its delivered state mm T2 495 495 495 495 495 495Model No. TE 7000.430 7000.440 7000.500 7000.510 7000.560 7000.570Model No. as bayed enclosure without side panels, incl. baying kit – – 7000.502 – 7000.562 –WHD600120060060012008006002000600600200080060022006006002200800PageSupply includesSelf-supporting 482.6 mm (19˝) frame structure, mounted between the roofand base frame with depth variability at the front and rear Glazed door at the front, including 130° hinge, two-point locking rod,recessed handle and security lock 3524 E Sheet steel door at the rear, including 130° hinge, two-point locking rod,recessed handle and security lock 3524 E Pluggable weight-reduced side panels with design beading andsecurity lock 3524 E /– /– Roof and base frame with maximum cutout for optional population withmodular panels, solid, with passive ventilation or for cable entry Roof plate including brush strip for cable entry and micro-perforationto the cutout and for population with active fan unit Levelling feet supplied loose to compensate for floor irregularities Spacers, 20 mm, supplied loose to raise the roof Premium accessories TE, for direct mounting in the delivered stateSide panels, pluggable, including security lock – – 7000.650 – 7000.654 – 14Ergoform-S handle for semi-cylinder, to exchange for the existing lock 2435.000 2435.000 2435.000 2435.000 2435.000 2435.000 13Fan unit, with 2 fans and thermostat, prewired ready for connection 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 15Base/plinth components 100 mm high, front and rear, solid 8601.605 8601.605 8601.605 8601.605 8601.605 8601.605 18Base/plinth components 100 mm high, front and rear, vented 7825.601 7825.601 7825.601 7825.601 7825.601 7825.601 18Base/plinth trim, side, 100 mm high 8601.065 8601.085 8601.065 8601.085 8601.065 8601.085 18Base/plinth adaptor for levelling feet M12 8800.220 8800.220 8800.220 8800.220 8800.220 8800.220 19Slide rail for TE, for attachment between the 482.6 mm (19˝) mounting frames,length 424 mm7963.400 7963.400 7963.400 7963.400 7963.400 7963.400 21482.6 mm (19˝) component shelf for static installation, for direct screw fasteningwithout an installation kit, 412 mm deep, load capacity 30 kg, static7000.620 7000.620 7000.620 7000.620 7000.620 7000.620 22Punched section with mounting flange 17 x 73 mm,for mounting installation components, attached in the enclosure depth8612.040 8612.040 8612.040 8612.040 8612.040 8612.040 27between the 482.6 mm (19˝) mounting framesC rail, for cable clamping in the enclosure depth via cable clamps 7828.040 7828.040 7828.040 7828.040 7828.040 7828.040 25C rail, for cable clamping in the enclosure width via cable clamps,on the 482.6 mm (19˝) mounting frame at the rear7828.060 7828.060 7828.060 7828.060 7828.060 7828.060 25Cable clamp rail, depth-variable 425 – 725 mm,for cable attachment in the enclosure depth via cable ties7858.160 7858.160 7858.160 7858.160 7858.160 7858.160 25Cable clamp rail, for cable attachment in the enclosure width via cable ties,on the 482.6 mm (19˝) mounting frame at the rear7828.061 7828.061 7828.061 7828.061 7828.061 7828.061 25Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 28TE socket strip, 8-way, with earthing-pin plug 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 2810 Rittal TE 7000

NetworkingNetwork enclosures TE 7000, width 800T1BT2HHEB = WidthT1 = DepthHE = U19˝T2: Mounting distance forpremium accessories,see page 12.Benefits:● Matching premium accessoriesfor rapid installation in thedelivered state● No frame structure, optimumaccessibility● Load capacity up to 400 kgMaterial:Sheet steelSurface finish:Mounting frame: Electrophoreticdipcoat primed, RAL 7044Enclosure panels: Powdercoated, RAL 7035Network enclosures TE 7000U 24 24 42 42 47 47Dimensions in mm482.6 mm (19˝) distance between levels in its delivered state mm T2 495 495 495 495 495 495Model No. TE 7000.450 7000.460 7000.520 7000.530 7000.580 7000.590Model No. as bayed enclosure without side panels, incl. baying kit – – – 7000.532 – 7000.592WHD800120060080012008008002000600800200080080022006008002200800PageSupply includesSelf-supporting 482.6 mm (19˝) frame structure, mounted between the roofand base frame with depth variability at the front and rear Glazed door at the front, including 130° hinge, two-point locking rod,recessed handle and security lock 3524 E Sheet steel door at the rear, including 130° hinge, two-point locking rod,recessed handle and security lock 3524 E Pluggable weight-reduced side panels with design beading andsecurity lock 3524 E /– /–Roof and base frame with maximum cutout for optional populationwith modular panels, solid, with passive ventilation or for cable entry Roof plate including brush strip for cable entry and micro-perforationto the cutout and for population with active fan unit Levelling feet supplied loose to compensate for floor irregularities Spacers, 20 mm, supplied loose to raise the roof Premium accessories TE, for direct mounting in the delivered stateSide panels, pluggable, including security lock – – – 7000.652 – 7000.656 14Ergoform-S handle for semi-cylinder, to exchange for the existing lock 2435.000 2435.000 2435.000 2435.000 2435.000 2435.000 13Fan unit, with 2 fans and thermostat, prewired ready for connection 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 15Base/plinth components 100 mm high, front and rear, solid 8601.805 8601.805 8601.805 8601.805 8601.805 8601.805 18Base/plinth components 100 mm high, front and rear, vented 7825.801 7825.801 7825.801 7825.801 7825.801 7825.801 18Base/plinth trim, side, 100 mm high 8601.065 8601.085 8601.065 8601.085 8601.065 8601.085 18Base/plinth adaptor for levelling feet M12 8800.220 8800.220 8800.220 8800.220 8800.220 8800.220 19Slide rail for TE, for attachment between the 482.6 mm (19˝) mounting frames,length 424 mm7963.400 7963.400 7963.400 7963.400 7963.400 7963.400 21482.6 mm (19˝) component shelf for static installation, for direct screw fasteningwithout an installation kit, 412 mm deep, load capacity 30 kg, static7000.620 7000.620 7000.620 7000.620 7000.620 7000.620 22Punched section with mounting flange 17 x 73 mm,for mounting installation components, attached in the enclosure depth8612.040 8612.040 8612.040 8612.040 8612.040 8612.040 27between the 482.6 mm (19˝) mounting framesC rail, for cable clamping in the enclosure depth via cable clamps 7828.040 7828.040 7828.040 7828.040 7828.040 7828.040 25C rail, for cable clamping in the enclosure width via cable clamps,on the 482.6 mm (19˝) mounting frame at the rear7828.060 7828.060 7828.060 7828.060 7828.060 7828.060 25Cable clamp rail, depth-variable 425 – 725 mm,for cable attachment in the enclosure depth via cable ties7858.160 7858.160 7858.160 7858.160 7858.160 7858.160 25Cable clamp rail, for cable attachment in the enclosure width via cable ties,on the 482.6 mm (19˝) mounting frame at the rear7828.061 7828.061 7828.061 7828.061 7828.061 7828.061 25Earthing kit for TE 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 28TE socket strip, 8-way, with earthing-pin plug 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 28Rittal TE 700011

NetworkingExplanation of levels600600AD600800AD800600AD800800ADABC495 mm – that is the distancebetween the two 482.6 mm(19˝) levels in the deliveredstate for all enclosure formats.Pitch spacing 50 mmDistance from door:52.5 mm with depth 600 mm,152.5 mm with depth 800 mmExample:600 x 600 mmExample:800 x 800 mmDThe attachment distancewithin a mounting frame at therear, horizontal, is equivalentto the frame attachmentdimension of a 600 mm wideTS 8 (outer level, 525 mm)EA – 120 mmEECBCBAADQuick assembly in the depthFast assembly in the width1. Ready to install – with thestandard spacing 495 mm2. Variable –on a 50 mm pitch pattern3. Variable –fully individualTE/TS 8 compatibilityin the width too:The premium accessories aretailored to this fixed dimension inthe delivered state for all enclosureformats. All installed equipmentfor the enclosure depth ismounted easily, quickly and witha precise fit to the TS 8 systempunchings. This is equivalentto the standard dimension of400 mm deep TS 8 enclosures,inner level.The distance between the two482.6 mm (19˝) levels may bealtered in increments of 50 mm(445 to 695 mm). Fast replacementof the principal componentsis offered by the tablebelow.The distance between levelsmay be selected completelyfreely via the slot fastening. Allkey mounting components –punched sections with mountingflanges, installation kits, sliderails, component shelves – arealso available in depth-variableformat.All components for the TS 8enclosure dimension W/D600 mm (inner level) fit into thewidth of the TE frame sections.Three rows of TS 8 system holesoffer suitable solutions for everytask.Fast selectionPageEnclosure depth600800Possible distances between the 482.6 mm (19˝) levels A445 495 545 595 645 695Slide rail for TE, for attachment between the 482.6 mm (19˝)mounting frames, fixed length– 7963.400 – 7963.500 – 7963.600 21482.6 mm (19˝) component shelf for static installation,for direct screw fastening without installation kit, 410 mm deep,– 7000.620 – – – – 22load capacity 30 kg, static482.6 mm (19˝) component shelf for static installation, 50 kg,471 mm wide, in conjunction with punched section with mounting 7164.035 7165.035 7165.035 7166.035 7166.035 7166.735 22flange, max. base depthPunched section with mounting flange 17 x 73 mm,for mounting components, attachment in the enclosure depth 8612.140 8612.040 8612.150 8612.050 8612.160 8612.060 27between the 482.6 mm (19˝) mounting framesC rail for cable clamping in the enclosure depth via cable clamps 7828.040 7828.040 7828.050 7828.050 7828.060 7828.060 25Cable clamp rails, depth variable 425 – 725 mm,for cable attachment in the enclosure depth via cable ties7858.160 7858.160 7858.160 7858.160 7858.160 7858.160 25PremiumTo fit enclosures in their delivered state12 Rittal TE 7000

AccessoriesLockThe Ergoform-S lock systemFor retrospective installation in all enclosures,without the need for mechanical reworking.The unlocked handle unfolds forwards and isswivelled to open the lock.Material:Die-cast zincSurface finish:Powder coatedGerman patent no. 34 07 700European patent no. 155 543with validity for AT, FR, GB, ITUS patent no. 4,631,937Australian patent no. 572 965Japanese patent no. 1680 637US design patent no. des. 292,171Japanese design pattern no. 762 637Ergoform standardPrepared for the installation of semi-cylinders withan overall length of 40 or 45 mm (to DIN 18 254)and all 27 mm lock inserts, type A.DesignRAL 7032with brown handleModel No.2450.000Brown 2451.000Matt nickel-plated 2452.000RAL 7032 2454.000RAL 7035 2435.000RAL 7032with brown handle and2455.000bracketHole diameter = 7 mm for padlock or multiple latchAccessories:Lock inserts, version A,see page 14.5050874 79.2 ± 0.1 42 42842Extra holefor electronic padlock18 ± 0.1Electromagnetic Ergoform-ShandleThe handle contains a handle sensor for monitoringand an electromagnetic latch. The handle iscompatible with the CMC-TC. The connectioncable with the RJ 12 connector is easily connectedto the access unit of the CMC-TC system.It is automatically configured, thanks to its detectionelectronics. An additional access sensor7320.530 is always required. After being releasedelectrically, the integral push-button should bedepressed. This push-button may also beexchanged for a lock insert with key 2467.000.The system may also be released via a read system,which may be mounted above the handle.Technical specifications:Rated voltage: 24 V DCRated current: max. 100 mAConnection cable: Length 3 m, RJ 12 connectorExtension cable: Length 2 m,RJ 12 connector/socketTemperature range: +5°C to +40°CProtection category: IP 40Handle systemElectromagneticErgoform-S handleAlso required:– An extra punching, see drawing– A lower locking bar depending on theenclosure height, on request– An access sensor 7320.530 (1 unit).Accessories:CMC-TC monitoring system,see page 29.Model No.7320.7006Rittal TE 700013

AccessoriesLock/side panels/bayingLock insertsVersion AMaterial:Die-cast zincNote:The universal lock system allows the installation ofa suitable handle for almost any application orcustomer specification. The relevant productordering page shows which handles can be fittedinto each particular assembly.Length 27 mmModel No.7 mm square 2460.0008 mm square 2461.0007 mm triangular 2462.0008 mm triangular 2463.000Screwdriver 2464.000Daimler insert 2465.0003 mm double-bit 2466.000Fiat 2307.0006.5 mm triangular (CNOMO) 2460.650Side panelsTo finish off individual racks or entire bayed suitesof racks at the sides.The side panels are simply located and securedwith the integral padlock.The beading increases the rigidity of the wallswhilst adding a special design touch. The lightweightdesign means that it is easily handled byone person.Material:Sheet steel, electrophoretic dipcoat-primed,powder-coatedFor enclosuresH x D mmPacks of Model No.1200 x 600 2 7000.6421200 x 800 2 7000.6442000 x 600 2 7000.6502000 x 800 2 7000.6522200 x 600 2 7000.6542200 x 800 2 7000.656Colour:RAL 7035Supply includes:2 side panels including security lock 3524 EProtection category:IP 20Baying kitFor connecting individual enclosures into bayedsuites at the sides. The enclosures are mountedbetween the base and roof frame.Material:Sheet steel, zinc-plated, passivatedSupply includes:1 set of baying connectorsPacks ofModel No.1 kit 7000.64014 Rittal TE 7000

AccessoriesIndividual roof configurationFan unit, activeFor active ventilation of the TE 7000, a ventilationopening may be removed from the front of thestandard roof plate and fitted with the fan module.The fan unit is prewired ready for connectionand has 2 fans, 1 thermostat and a connectioncable including IEC320 connector. An additionalfan may optionally be integrated via an integralterminal block.Supply includes:Fan unit including assembly parts, 2 fans,thermostat and connection cable.Technical specifications for one fan:See fan expansion kit belowTechnical specifications of thermostat:Rated operating voltage: 250 VTemperature range: +5°C to +55°CFor enclosuresW x DmmAll sizesavailableAccessories:Fan expansion kit,see below.Number ofprewiredfansPossiblenumberof fansModel No.2 3 7000.670Fan expansion kitFor retrofitting various fan units.Technical specifications:Rated operating voltage: 230 V ACPower consumption: 19/18 W at 50/60 HzAir throughput (unimpeded air flow):140/165 m 3 /h, 50/60 HzNoise level (unimpeded air flow): 37 dB (A)Temperature range: –10°C to +55°CDimensionsW x H x D mmPacks of Model No.119 x 119 x 38 1 kit 7980.000Supply includes:Fan, including assembly parts and connectioncable (0.61 m).SpacersTo assist passive ventilation, spacers may beused to raise the module plates.Material:Hexagonal sectional steel, zinc plated,passivated.Supply includes:4 spacers, including assembly parts.Height Packs of Model No.20 mm 4 7526.963Rittal TE 700015

AccessoriesIndividual roof/base configurationModule plate, solidIn exchange for the existing roof plate, the roof orbase section of the TE 7000 may be varied asrequired with the module plates.In order to support passive ventilation, the moduleplates may be raised using spacers – seepage 15.Material:Sheet steel, spray finishedWidth(B) mmDepth(T) mmModel No.450 200 7526.760450 450 7526.770450 650 7526.780650 200 7526.800650 450 7526.780650 650 7526.820TTColour:RAL 7035, on request in RAL 9005.Supply includes:Module plate, including assembly parts.Note:Configuration data – see below.HBCompensating plateWhen combining individual modules, a compensatingplate is needed to close the roof/baseassembly completely.Width (B) mm Depth (T) mm Model No.450 50 7526.750650 50 7526.790Module plate, with brush stripConvenient cable entry, numerous configurationoptions in the roof and base frame, in both theenclosure width and the enclosure depth.Width (B) mm Depth (T) mm Model No.450 200 7526.850650 200 7526.860TMaterial:Sheet steel, spray finishedColour:RAL 7035, on request in RAL 9005.Supply includes:Module plate with brush strip, including assemblyparts.Note:Configuration data – see below.Also required:For a completely sealed roof/base assembly:Compensating plate 7526.750 or 7526.790,see above.BHTModule plate, ventedPerforated module plate to support passiveventilation and cooling. May be integrated intoboth the enclosure width and the enclosure depth.Material:Sheet steel, spray finishedColour:RAL 7035, on request in RAL 9005.Supply includes:Perforated module plate,including assembly parts.Width (B) mm Depth (T) mm Model No.450 200 7526.829650 200 7526.834Note:Configuration data – see below.Also required:For a completely sealed roof/base assembly:Compensating plate 7526.750 or 7526.790,see above.BHConfiguration:EnclosuredimensionsmmInstallationposition/enclosureB 600 600 800 800T 600 800 600 8002 x module platesin the width or depthplus 1 x compensatingplate in each caseRoof frameBase frameTE 7000 network enclosures3 x module platesin the width or2 x module platesin the depthplus 1 x compensatingplate in each case2 x module platesin the width or3 x module platesin the depthplus 1 x compensatingplate in each case3 x module platesin the width or depthplus 1 x compensatingplate in each caseTBTBTBTB16 Rittal TE 7000

AccessoriesBase/plinthModular base/plinth diversityThanks to the logical breakdown of the entirebase/plinth into two ordering units, all dimensionalvariants are achieved with minimum stocklevels.Other benefits include easier installation, numerouscable entry options, and the stabilising bayingconnection.Enclosure width Basic form Cable gland optionsStabilisation of bayed base/plinths100 mm200 mmFunction and cost benefitsFewer parts, more opportunities, coupled withlower purchasing, storage and assembly costs –this is the winning formula for the new modularbase/plinth system.The following table shows three bayed base/plinths in 200 mm height illustrating a wide rangeof possible solutions and the potential savingswith trim panels compared with the previous200 mm base/plinth system, each with two100 mm high trim panels at the sides.Sample solutions New supply includes Functional benefits3 packs of base/plinth components1 pack of base plinth trim panels200 mm highContinuous cable chamberSavings potential compared withtwelve 100 mm trim panels2 trim panels 200 mm3 packs of base/plinth components1 pack of base plinth trim panels,200 mm high1 pack of base plinth trim panels,100 mm highAdditional stabilisationfor transportation purposes withbase/plinth trim rotated through 90°2 trim panels 200 mm2 trim panels 100 mm3 packs of base/plinth components2 packs of base plinth trim panels,200 mm highShielding of the base/plinths from oneanother4 trim panels 200 mm3 packs of base/plinth components1 pack of base plinth trim panels,200 mm high1 pack of base plinth trim panels,100 mm highAdditional connection of the base/plinth2 trim panels 200 mm2 trim panels 100 mmOther options:● Cable entry at the side by mounting a 100 mmbase/plinth trim panel (top or bottom).● Cable entry from the rear by dismantling oneor more trim panels of the base/plinth components.● Cable clamp rail fitted on the 100 mm high trim panel.Rittal TE 700017

AccessoriesBase/plinthBase/plinth components,front and rearBase/plinth component consisting of one trimpanel and two pre-configured corner pieces.Design with solid or vented trim panel. In 200 mmhigh base/plinth components, one trim panel isdivided into two for cable entry.Material:Component = Sheet steel, spray-finishedCover = PlasticColour:RAL 7035Supply includes:1 set =2 base/plinth components,4 covers,4 screws and captive nuts M12 for mounting onthe enclosure.For enclosure width mm600 800DesignBase/plinthheight mmModel No.Solid 100 8601.605 8601.805Solid 200 8602.605 8602.805Vented 100 7825.601 7825.801Vented withdesigner100 7825.603 7825.803coverPacks of 1 setAccessories:Filter mat for trim panel, vented,see page 19.Base mounting plate 2817.000,see page 19.Base/plinth trim panels, sideFor mounting between the base/plinth components.With 200 mm height, two 100 mm base/plinth trims may be used. Base/plinth trim panels(100 mm high) may be installed rotated through90° in order to stabilise bayed base/plinth components.Material:Sheet steel, spray finishedColour:RAL 7035Supply includes:1 set =2 base/plinth trim panelsincluding parts for attaching to the base/plinthcomponents.For enclosureModel No.depth mm 100 mm high 200 mm high600 8601.065 8602.065800 8601.085 8602.085Packs of 1 setAlso required:Base/plinth baying brackets 8601.100,see page 19, for mounting rotated through 90° inorder to stabilise bayed base/plinth components.HDescription of the hole patternsB1/T1 = External dimensionFor screw-fastening in the thread of theB2/T2 =enclosure corner piece from belowFor screw-fastening with captive nuts to theB3/T3 =enclosure base from below or aboveAll holes (B2 – B4/T2 – T4) may be used for screwfasteningto the base.B2B1T2T1Base/plinth components front/rearBase/plinth trim, sideWidth mm B1 B2 Depth mm T1 T2600 600 415 600 569 444800 800 615 800 769 64418 Rittal TE 7000

AccessoriesBase/plinthFilter matfor base/plinth component, ventedTo cover the trim panel in the base/plinth component.The mounting frame simply clips into thebase/plinth trim panel from behind. Filter class G3to DIN EN 779.Supply includes:Filter mat with mounting frame.Forenclosure width Packs of Model No.mm600 1 7561.500800 1 7581.500Spare filter matSupply includes:Filter mat without mounting frames for base/plinthtrim panels up to 800 mm wide.Packs of Model No.Spare filter mats 5 7582.500Base/plinth baying bracketsEssential if the trim panels are mounted rotatedthrough 90° for additional stabilisation during thetransportation of bayed enclosures.Material:Sheet steel, zinc plated, passivated.Supply includes:Baying brackets, screws M8 x 16 mmPacks ofModel No.20 8601.100Base mounting plateFor fastening the plinth to the floor without movingthe enclosure or the bayed enclosure suite.For assembly screws up to 12 mm Ø.Material:Sheet steel, zinc plated, passivated.Packs ofModel No.10 2817.000German utility model no. G 93 08 162French patent no. 9406612Dutch patent no. 193235Base/plinth adaptorfor levelling feetConnection component for the attachment of M12levelling feet 4612.000 to the base/plinth.Material:Sheet steel, zinc plated, passivated.Note:The levelling feet M10 (included with the supply)of the enclosures cannot be attached beneath thebase/plinth.Packs ofModel No.4 8800.220Also required:Levelling feet, 4612.000.Rittal TE 700019

AccessoriesBase/plinthTransport castorsfor base/plinthFor locating onto the base/plinth corner piece100 or 200 mm high by raising or tilting.Ground clearance:approx. 100 mmLoad capacity:Maximum permissible static load:max. 300 kg static load per enclosure.Colour:RAL 7022 (umber grey)Supply includes:1 set =4 roller bearings,4 twin castors,2 lockable, 2 not.Packs ofModel No.1 set 8800.390Note:Combined use with levelling feet is not possible.Transport castorsFor easy transportation between two sites.The castors may additionally be screw-fastenedto the levelling feet in the corner areas of the baseframe.Load capacity:300 kg, staticSupply includes:1 set =4 transport castors, two of them lockable,including assembly parts.Packs ofModel No.1 set 7000.67220 Rittal TE 7000

AccessoriesInterior installationSlide railsfor TE/FR(i)For mounting between a front and a rear pair ofmounting angles. The slide rails can be used tosupport heavy 482.6 mm (19˝) components.W x H: 85 x 80 mmLoad capacity:80 kgMaterial:Sheet steel, zinc plated, passivated.Supply includes:2 slide rails, assembly parts.Lengthmm19˝ distancebetweenlevels mmPossiblealternative:Depth-variable slide rail,see page 22.Packs ofModel No.324 395 2 7963.310424 495 1) 2 7963.410524 595 2 7963.510624 695 2 7963.6101) Premium accessories: a direct fit for enclosuresin their delivered state.Component shelf, 2 Ustatic installationIf only one pair of 482.6 mm (19˝) mountingangles is available for mounting a componentshelf, this variant offers a particularly cost-effectivesolution. Retrospective installation of telescopicslides is not possible.Load capacity:25 kg surface load, staticMaterial:Sheet steel, spray finishedColour:RAL 7035Component shelf depthmmModel No.250 7119.250400 7119.400Also required:Screws, captive nuts,see page 28/29.Component shelf, 2 Ustatic installation or fully extendableSuitable for installation in all enclosures with onlyone 482.6 mm (19˝) location point via flangemounting.Load capacity:25 kg surface load, staticMaterial:Sheet steel, spray finishedColour:RAL 7035Supply includes:1 set =1 component shelf,2 installation brackets,assembly parts.For static installation or fully extendable 1)Width x depthModel No.mm390 x 300 7148.0351)For fully extendable version, telescopic slides7051.000 should be ordered additionally.Accessories:Telescopic slides,see page 460, IT Catalogue.Handle,see page 24.Rittal TE 700021

AccessoriesInterior installationComponent shelf,static installationfor direct installationFor fast integration of a component shelf, toaccommodate a wide variety of built-in components.Combination with telescopic slides is notpossible.The component shelf is mounted at the side onthe front and rear 482.6 mm (19˝) mounting frame.Load capacity:30 kg, staticMaterial:Sheet steel, spray finished in RAL 7035Supply includes:Component shelf, including assembly parts.W x H x Dmm19˝ distancebetween levelsPacks of Model No.512 x 22 x 412 495 1) 1 7000.6201) Premium accessories: a direct fit for enclosuresin their delivered state.Component shelf for staticinstallationSlotted and unslottedTwo versions:● Max. load capacity 50 kg● Max. load capacity 100 kgGenerally speaking, an installation kit is neededfor installation in accordance with the chosen482.6 mm (19˝) distance between levels.For simplified setting of the required 482.6 mm(19˝) distance between levels, the enclosureframe of the TE 7000 has mounting attachmentpoints on a 50 mm pitch pattern of holes.Load capacity:50 kg/100 kgMaterial:Sheet steel, 1.5/2 mm, spray finishedColour:RAL 7035Supply includes:Component shelf including mounting accessories.Also required:2 TS 8 punched sections with mounting flangesper component shelf in accordance with thechosen 482.6 mm (19˝) distance between levels,see page 27.Enclosure width mm 600/800Component shelf width mm 471Component shelf depth mm 400 500 600 70050 kg slotted 7164.035 7165.035 7166.035 7166.735Model No. 50 kg unslotted 7264.035 7265.035 7266.035 –100 kg slotted 7464.035 7465.035 7466.035 7466.735482.6 mm (19˝) distance between levels, minimum 495 1) 495 1) 595 695TS 8 punched section with mounting flange 17 x 73mm as an installation kit in the enclosure depth8612.040 8612.040 8612.050 8612.060between the 482.6 mm (19˝) mounting frames1)Premium accessories: a direct fit for enclosures in their delivered state.Slide rail, depth-variable, 1 UThe slide rail facilitates flexible integration of482.6 mm (19˝) components without loss of installationheight in all enclosures with L-shapedmounting angles or 482.6 mm (19˝) mountingframes in enclosure series TS 8, TE and FR(i) andtheir server variants.Installation of the slide rail is independent from thechosen distance between levels, since the installationlength may be flexibly adapted.Material:Sheet steelSurface finish:Zinc plated, passivatedLengthmmLoadcapacityContact surfaceW x D mmModel No.390 – 600 50 kg 50 x 330 7063.878590 – 930 80 kg 50 x 525 7063.880Supply includes:2 slide rails, including assembly parts22 Rittal TE 7000

AccessoriesInterior installationComponent shelf 1 / 2 U,depth-variableThis space-saving component shelf is screwfastenedto the front and rear 482.6 mm (19˝)attachment level. It is infinitely depth-adjustableand may be fitted independently from the enclosure.Combination with telescopic slides is notpossible.Distance between levelsmmModel No.400 – 600 7063.710600 – 900 7063.720Load capacity:50 kg surface load, staticMaterial:Sheet steelSurface finish:Spray finished, RAL 7035Supply includes:Component shelf, including assembly parts.Component shelf, 482.6 mm(19˝) configurationThe component shelves may be inserted in networkenclosures with two pairs of 482.6 mm (19˝)mounting angles.The component shelves offer a number of locationpoints depending on their depth, so that thedistance between levels is completely variable inconjunction with the depth-variable installation kit.Each component shelf secured in this way can beretrospectively upgraded to full withdrawal usingtelescopic slides. For this purpose, the telescopicslides are screw-fastened in place of the spacers.Load capacity:50 kg or 100 kg surface load, staticMaterial:Sheet steelColour:RAL 7035Supply includes:Component shelf including spacers for staticinstallation.Also required:Depth-variable installation kit,see below.Component shelf width mm 409Component shelf depth (T) mm 300 400 500 600 700Model No. 50 kg shelf 7143.035 7144.035 7145.035 7145.635 7145.735Telescopic slides 50 kg 7051.000 7061.000 7081.000 7161.000 7161.700Model No. 100 kg shelf – – 7063.895 – 7063.897Telescopic slides 100 kg – – 7065.000 – 7066.700Handle for component shelf 3636.010 3636.010 3636.010 3636.010 3636.010Installation kit, depth-variablefor 482.6 mm (19˝) component shelvesInfinitely adjustable to the spacing between thetwo pairs of 482.6 mm (19˝) mounting angles.Suitable for all 482.6 mm (19˝) component shelvesin 409 mm width. May also be combined withtelescopic slides.Material:Sheet steelSurface finish:Zinc plated, passivatedSupply includes:1 set =2 mounting rails, including assembly partsLength mm Load capacity Model No.400 – 600 50 kg 7063.858600 – 850 50 kg 7063.860610 – 900 100 kg 7063.891 1)710 – 1000 100 kg 7063.890Packs of 1 set1) Only in conjunction with 500 mm deep componentshelvesAccessories:Component shelves, 482.6 mm (19˝),see above.Telescopic slides,see page 460, IT Catalogue.Rittal TE 700023

AccessoriesInterior installation/cable managementHandlesfor component shelvesAll component shelves are prepared for theattachment of handles.Material:Die-cast zinc, spray finished.Supply includes:2 handles,including assembly parts.Packs ofModel No.2 3636.010Fastening boltsfor slotted component shelvesFor non-slip attachment of your components. Thebolts are screwed into the longitudinal slots of thecomponent shelf support surface. Consequently,they are infinitely adjustable and can be adaptedto suit any appliance.Packs ofModel No.4 7115.000Cable tiesfor quick assemblyThe super-fast solution for attaching cables in theround system punchings e.g. of punched sectionsor to the rear of the 482.6 mm (19˝) mountingframe. Simply clip into the round systempunchings.Length mm Packs of Model No.150 100 2597.000Cable tie fastenerFor all commercially available cable ties up to atie width of 4.8 mm. Simply insert into the roundsystem punchings and secure by hammeringdown the split rivet.Material:Polyamide 6.6Packs ofModel No.100 6059.000Nylon loop fastenerWith the nylon loop fastener, secured sections ofcable are easily released, allowing individualcables to be added or removed. Ideal for sensitivedata cables (fibre-optic/Cu), as it avoidsindentations on the cable sheathing. In addition,the nylon loop fastener may be screw-fastened tothe round system punchings.Colour:BlackWidthmmLengthmmMax. cablediameter mmPacks of Model No.16 130 30 10 7072.22016 200 50 10 7072.23016 300 90 10 7072.240Also required:Screw 2486.500 for screw-fastening to the roundsystem punchings,see page 29.24 Rittal TE 7000

AccessoriesCable managementC railTo accommodate large tensile forces, largercables or cable sections via cable clamps, andfor tidy cable routing inside the enclosures.The cable clamp rails may be located directly ona 482.6 mm (19˝) mounting frame horizontally atthe rear or in the enclosure depth between twomounting frames. An additional screw fasteningsecures the unit.If the rail is to be secured between two mountingframes, it is necessary to secure the two482.6 mm (19˝) mounting frames at the correspondingdistance from one another beforehand.Material:Sheet steel, zinc plated, passivatedSupply includes:4 C rails, including assembly parts.Accessories:Cable clamps,see below.Type of attachmentIn the enclosurewidthIn the enclosuredepth19˝ distance between levelsmm– 445/495 1) 545/595 645/695Model No. 7828.060 7828.040 7828.050 7828.0601)Premium accessories: a direct fit for enclosures in their delivered state.Cable clampsFor attaching cables to C rails, with plastic insert.Material:Sheet steel, zinc plated, passivated.For cable diametermmPacks of Model No.6 – 14 25 7077.00012 – 18 25 7078.00018 – 22 25 7097.00022 – 26 25 7097.22026 – 30 25 7097.26030 – 34 25 7097.30034 – 38 25 7097.34038 – 42 25 7098.00042 – 56 25 7098.10056 – 64 25 7099.000Cable clamp railsFor strain relief of the routed cables. The cablesmay be attached to the cable clamp rails withcable ties or nylon loop fasteners.The cable clamp rails may be located directlyonto a 482.6 mm (19˝) mounting frame horizontallyat the rear or in the enclosure depth betweentwo mounting frames. An additional screw fasteningsecures the unit.The depth-variable version of the rails facilitatesflexible adaptation of their length to the prescribedattachment distance between the two482.6 mm (19˝) mounting frames.Material:Sheet steel, zinc plated, passivatedSupply includes:4 cable clamp rails, including assembly parts.Accessories:Cable ties, nylon loop fasteners,see page 24.Type of attachment In the enclosure width In the enclosure depth19˝ distance betweenlevels mm– 445 – 695 1) 620 – 1015Model No. 7828.061 7858.160 7858.1621)Premium accessories: a direct fit for enclosures in their delivered state.Rittal TE 700025

AccessoriesCable managementShunting ring, plasticFor flexible cable routing, in two materials andthree size variants.Attachment facility at the side of the 482.6 mm(19˝) mounting frame.Polyamide version:Infinitely adjustable fastening by means of a slot.The shunting ring 7218.035 may also be used on1 U patch panels.Colour:RAL 7035The following applies to 7218.035 and 7219.035:German patent no. 4413124MaterialDimensionsmmPacks of Model No.Polyamide 70 x 44 10 7218.035Polyamide 105 x 70 10 7219.035Polycarbonate 95 x 50 10 7228.035Polycarbonate version:Variable attachment option, with 45° attachmentthe cable shunting ring may be attached to a 1 Upanel.Colour:RAL 7035Possiblealternative:Cable management panel, 1 U,see page 460, IT Catalogue.Cable shunting ringFor flexible, system-compatible cable routing atthe side of the 482.6 mm (19˝) mounting frame.Material:Sheet steel, zinc plated, passivated.Supply includes:10 cable shunting rings,including assembly parts.German patent no. 3813002DimensionsmmPacks of Model No.120 x 80 10 7111.900120 x 60 10 7111.00080 x 37 10 7112.000Shunting ringTo accommodate large quantities of cables.Shunting ring for side attachment to 482.6 mm(19˝) sections in 800 mm wide network enclosures.The shunting ring is attached asymetrically,with 1 / 3 in front of and 2 / 3 behind the482.6 mm (19˝) front. In this way, even large quantitiesof cables can be effectively managed.Material:Round steel, zinc plated, passivated.Supply includes:4 shunting rings with assembly parts.Dimensions mmModel No.300 x 90 7220.60026 Rittal TE 7000

AccessoriesInterior installation, rail systemTS punched section withmounting flange 17 x 73 mmFor designing a flexible interior installation, or foraccommodating additional components. Thepunched sections with mounting flanges may belocated directly onto a 482.6 mm (19˝) mountingframe horizontally at the rear or in the enclosuredepth between two mounting frames. An additionalscrew fastening secures the unit.If the rail is to be secured between two mountingframes, it is necessary to secure the two482.6 mm (19˝) mounting frames at the correspondingdistance from one another beforehand.For simplified setting of this required 482.6 mm(19˝) distance between levels, the enclosureframe of the TE 7000 has mounting attachmentpoints on a 50 mm pitch pattern of holes.Material:Sheet steel, zinc plated, passivatedSupply includes:4 punched sections with mounting flanges,including assembly parts.German patent no. 196 47 802Type of attachmentIn theenclosure widthIn the enclosure depth19˝ distancebetween levels mm– 445 495 1) 545 595 645 695Model No. 8612.060 8612.140 8612.040 8612.150 8612.050 8612.160 8612.0601)Premium accessories: a direct fit for enclosures in their delivered state.Note:When selecting a distance between levels outsideof the mounting attachment points, it is advisableto use the depth-variable punched sectionwith mounting flange,see below.TS punched section withmounting flange 17 x 73 mm,depth-variableFor designing a flexible interior installation, or foraccommodating additional components. Thepunched sections with mounting flanges may belocated in the depth between two mountingframes. An additional screw fastening secures theunit.The depth-variability of the rails facilitates flexibleadaptation to the prescribed attachment distancebetween the two 482.6 mm (19˝) mountingframes. An additional punched centre pieceslides along the rail in the depth and can besecured to slots.19˝ distancebetween levels mmPacks of Model No.420 – 590 2 7000.676650 – 820 2 7000.678Material:Sheet steel, zinc plated, passivatedSupply includes:2 variable punched sections with mountingflanges, each with a sliding centre piece,including assembly parts.Rittal TE 700027

AccessoriesEarthing/assembly partsTE socket strip8-way socket strip for earthing-pin plugs/versionD. The strip is made of plastic and may bemounted vertically on the TE frame or in the rear482.6 mm (19˝) section. In the 482.6 mm (19˝)section, more than 1 U of space is required. Thesockets are arranged at an angle of 45°, so thatangular connectors may also be easily used. Thesocket strip is supplied with a 2 m connectioncable. The connection cable is attached in aterminal slot in the strip. The terminal slot isequipped with a separate cover, so that easy, fastaccess to this connection point is always available.The connection cable is likewise easilyreplaced. Furthermore, the socket strip has externalterminals for separate earthing.Technical specifications:Rated voltage: 230 V ACRated current: max. 16 AConnection cable: Length 2 m, H05VV-F3G,1.5 mm 2 , without connectors with wire end ferrulesTE socket stripModel No.8-way, earthing-pin 7000.630Complete earthing kitFor system-compatible earthing of all enclosureparts on the enclosure frame according to VDE.The earth conductors are pre-assembled readyfor connection with connectors and cut to thecorrect length.Supply includes:Earth conductors, 6 mm 2 , including assemblyparts.Packs ofModel No.1 kit 7000.675Also required:Earthing kit 7526.981 for the installation withmodule plates.Assembly screwsM5 x 16 mm/M6 x 16 mmFor rack-mounted electronics, 482.6 mm (19˝)installed equipment and blanking plates,including plastic washers.Design Packs of Model No.Phillips-head screw M5 100 2099.500Cheese-head screw M6 100 2093.200Phillips-head screw M6 100 2089.000Torx screwsM5 x 16 mm/M6 x 16 mmFor optimum transmission of torques, an extendedtool life and increased safety and reliability whentightening and loosening screw connections.Supply includes:Assembly screws with Torx screw head includingplastic washers.Bit size Packs of Model No.M5 Torx 25 100 7094.500M6 Torx 30 100 7094.60028 Rittal TE 7000

AccessoriesEarthing/assembly partsCaptive nuts M5/M6For the attachment of rack-mounted electronicequipment, 482.6 mm (19˝) installed equipmentand blanking plates to mounting angles,482.6 mm (19˝).For use with metal thicknesses from 0.8 – 2.0 mm.In areas of narrow tolerance, captive nuts formetal thicknesses of 1.2 – 1.5 mm should beused. Optionally with or without contact of theinstalled equipment to the 482.6 mm (19˝) section/enclosure.Captive nut M5DesignPacks ofFor metalthicknesses Model No.mmWith contact 50 0.8 – 2.0 2094.500Without contact 50 0.8 – 2.0 2092.500Captive nut M6DesignPacks ofFor metalthicknesses Model No.mmWith contact 50 0.8 – 2.0 2094.200Without contact 50 0.8 – 2.0 2092.200With contact 50 1.2 – 1.5 2094.300Without contact 50 1.2 – 1.5 2092.300Torx screwsFor round holes 4.5 mm diameter in the enclosuresection, punched rails and punched sectionswithout mounting flanges.Dimensions Packs of Model No.Torx screws 5.5 x 13 mm 300 2486.500CMC-TC monitoring systemThe CMC-TC monitoring system protects thesafety-relevant network components, and hencesensitive data, in the TE enclosure. The system isinstalled using the plug & play system via RJ connectors.The sensors are automatically detectedand set up. The network interface is Ethernet10BaseT. The security information may beaccessed via the data network. TCP/IP, SNMP,WEB, FTP, Telnet and RS 232 are used. A basicpackage required for every application is listedbelow. The three function packages listed areadditionally available for selection. Further informationand functions (SMS via GSM etc.) may befound in our IT News 2004 brochure.Basic package for up to 4 function packages:CMC-TC processing unit 7320.100CMC-TC power pack 24 V,input 100 – 230 V AC7320.425CMC-TC 1 U mounting unit 7320.440CMC-TC connection cable,sensor unit 0.5 m, packs of 47320.470CMC connection cable D 230 V AC 7200.210Programming cable 7200.221Function packages:1. Climate control package for TE fan control:CMC-TC climate unit 7320.230CMC-TC temperature sensor 7320.500CMC connection cable D 230 V AC 7200.210Matching TE fan mounting plate, see page 16.2. Access package for TE door control:CMC-TC access unit 7320.220CMC-TC access sensor, packs of 2 7320.530CMC-TC coded lock 7320.770Matching handle and accessories, see page 13/14.Indicator package for TE alarm monitoring:CMC-TC I/O unit 7320.210CMC-TC temperature sensor 7320.500CMC-TC humidity sensor 7320.510CMC-TC smoke alarm 7320.560CMC-TC digital input 7320.580For a further selection of sensors, see IT News 2004.Rittal TE 700029

Table of model numbersModel No. Page2089.000 282092.200 292092.300 292092.500 292093.200 282094.200 292094.300 292094.500 292099.500 282307.000 142435.000 132450.000 132451.000 132452.000 132454.000 132455.000 132460.000 142460.650 142461.000 142462.000 142463.000 142464.000 142465.000 142466.000 142486.500 292597.000 242817.000 193636.010 246059.000 247000.430 107000.440 107000.450 117000.460 117000.500 107000.502 107000.510 107000.520 117000.530 117000.532 117000.560 107000.562 107000.570 107000.580 117000.590 117000.592 117000.620 227000.630 287000.640 147000.642 147000.644 147000.650 147000.652 147000.654 147000.656 147000.670 157000.672 207000.675 287000.676 277000.678 277063.710 237063.720 237063.858 237063.860 237063.878 227063.880 227063.890 23Model No. Page7063.891 237063.895 237063.897 237072.220 247072.230 247072.240 247077.000 257078.000 257094.500 287094.600 287097.000 257097.220 257097.260 257097.300 257097.340 257098.000 257098.100 257099.000 257111.000 267111.900 267112.000 267115.000 247119.250 217119.400 217143.035 237144.035 237145.035 237145.635 237145.735 237148.035 217164.035 227165.035 227166.035 227166.735 227200.210 297200.221 297218.035 267219.035 267220.600 267228.035 267264.035 227265.035 227266.035 227320.100 297320.210 297320.220 297320.230 297320.425 297320.440 297320.470 297320.500 297320.500 297320.510 297320.530 297320.560 297320.580 297320.700 137320.770 297464.035 227465.035 227466.035 227466.735 227526.750 167526.760 167526.770 167526.780 16Model No. Page7526.790 167526.800 167526.820 167526.829 167526.834 167526.850 167526.860 167526.963 157561.500 197581.500 197582.500 197825.601 187825.603 187825.801 187825.803 187828.040 257828.050 257828.060 257828.060 257828.061 257858.160 257858.162 257963.310 217963.410 217963.510 217963.610 217980.000 158601.065 188601.085 188601.100 198601.605 188601.805 188602.065 188602.085 188602.605 188602.805 188612.040 278612.050 278612.060 278612.060 278612.140 278612.150 278612.160 278800.220 198800.390 2030 Rittal TE 7000

Rittal internationalAgencies worldwideGermanyRittal GmbH & Co. KGPostfach 16 62D-35726 HerbornTel.: +49 (27 72) 5 05-0Fax: +49 (27 72) 5 05-2319email: info@rittal.dewww.rittal.comArgentinaRacklatina S.A.Av. Pedro B.Palacios 81 – 851704, Ramos MejíaBuenos AiresTel.: +54(11) 46 56-32 31Fax: +54(11) 46 56-23 23email:info@racklatina.com.arAustraliaRittal Pty. Ltd.130 – 140 Parraweena Rd.Taren Point NSW 2229Tel.: +61(2) 95 25 27 66Fax: +61(2) 95 25 28 88Free Call 1800 350 665email: info@rittal.com.auAustriaRittal-SchaltschränkeGes.m.b.H.Laxenburger Straße 246aA-1239 WienTel.: +43(1) 610 09-0Fax: +43(1) 610 09-21email: info@rittal.atBahrainPlease contactRittal Middle East FZEDubai/U.A.E.BelarusNetexpertVolocha Str. 1 of 310220036 MinskTel.: +3 75 (172) 86 20 03Fax: +3 75 (172) 56 65 15BelgiumRittal nv/saIndustrieterrein E17/3Stokkelaar 8B-9160 LokerenTel.: +32(9) 3 53 91 11Fax: +32(9) 3 55 68 62email: info@rittal.beBosnia-HerzegovinaSYS Company d.o.o.Sibenska b.b.BiH-71000 SarajevoTel.: +3 87/33/27 70 90Fax: +3 87/33/23 05 57email: sys@sys.baBrazilRittal Sist. Eletrom. Ltda.Av. Cândido Portinari,nr. 1.174VI Jaguara05114-001 São Paulo-SPTel.: +55(11) 36 22 23 77Fax: +55(11) 36 22 23 99email: info@rittal.com.brBulgariaRITTBUL Ltd.56 Gorski patnik Str. Office 5BG-1421 SofiaTel.: +359(2) 65 10 66Fax: +359(2) 96 32 516email: bojkov@rittbul.bgCanadaRittal Systems Ltd.7320 Pacific CircleMississauga, OntarioL5T 1V1Tel.: +1(9 05) 7 95 07 77Fax: +1(9 05) 7 95 95 48email:rittal.systems@rittal.caChileAMMY S.A.Camino El Cerro 5090Casilla 241-V C21HuechurabaSantiagoTel.: +56(2) 7 40 01 02Fax: +56(2) 7 40 10 65email:ammysa@entelchile.netChinaRittal Electro-MechanicalTechnology Co. Ltd.1658 # Minyi RoadSongjiang DistrictShanghai, 201612Tel.: (021) 5115 7799Fax: (021) 5115 7788email:marketing@rittal.com.cnColombiaCOLSEIN Ltda.Medición y AutomatizaciónCalle 82 No. 5 – 48Apartado Aereo 55479Santafé de Bogotá,D.C. ColumbiaTel.: +57(1) 6 10 26 74Fax: +57(1) 6 10 78 68email: info@colsein.com.coCosta RicaElvatron400 metros nortede la agencia delBanco de Costa RicaSan JoséTel.: +5 06 (2 96) 10 60Fax: +5 06 (2 32) 60 71CroatiaTechnoshell D.O.O.Jankomir, Josipa Loncara bbHR-10020 ZagrebTel./Fax:+3 85/1/34 55 256email:technoshell@zg.htnet.hrCyprusChristos Charalambous& Sons Ltd.9 – 11 Zanettos StreetP.O. Box 1268NicosiaTel.: +3 57/2 77 20 55Fax: +3 57/2 45 81 97email:chchara@spidernet.com.cyCzech RepublicRittal Czech, s.r.o.Ke Zdibsku 182250 66 Zdiby u PrahyTel.: +420 234 099 000Fax: +420 234 099 099email: info@rittal.czDenmarkRittal a/sHoltvej 8 – 10Høruphav6400 SønderborgTel.: +45 70 25 59 00Fax: +45 74 25 59 01email: info@rittal.dkDubai/U.A.E.Rittal Middle East FZEWarehouse GC2P.O. Box 17 599Jebel Ali Free Zone – DubaiU.A.E.Tel.: +971(4) 8 83 41 31Fax: +971(4) 8 83 42 44email:info@rittal-middle-east.comEgyptRittal Egypt S.A.E.45, Gamiat El DewalAl Arabia St.Mohandesine, GizaTel.: +2(012) 74 28 012Fax: +2(02) 74 82 276email: info@rittal-egypt.comFinlandRittal OyValimotie 35PL 13401510 VantaaTel.: +3 58 9 4 13 44 00Fax: +3 58 9 4 13 44 410email: info.keskus@rittal.fiFranceRittal France SASZ.A. des Grands Godets880, rue Marcel Paul94507 Champignysur Marne CedexTel.: +33(1) 49 83 60 00Fax: +33(1) 49 83 82 06N o Azur: 0801 Rittal(0801 748 825)email: info@rittal.frFrance-EastSermes S.A.14, rue des Frères EbertsBoîte Postale 17767025 Strasbourg-CedexTel.: +33(3) 88 40 72 00Fax: +33(3) 88 40 72 49email:appareillage@sermes.frGreat BritainRittal LimitedBraithwell WayHellaby Industrial EstateHellabyRotherhamS YorksS668QYTel.: +44(17 09) 70 40 00Fax: +44(17 09) 70 12 17email:information@rittal.co.ukGreeceRITTAL EPEThessalonikis 9814342 Nea Philadelphia,AthenTel.: +30/210/27 17 975976Fax: +30/210/27 12 398www.rittal.grGuatemalaINTEKIngeniería y TecnologíaVia 5 y Ruta 3,Zona 4 Esquina01004 Guatemala, C.A.Tel.: +50(2) 332 1489332 4336Fax: +50(2) 334 4338email:jmguzman@intek-ca.comHong KongRangerEnterprise Co. Ltd.Units A-B, 8/F, Block 1Tai Ping Industrial Center57 Ting Kok RoadTai Po, N. T.Hong KongTel.: +8 52 24 20 89 28Fax: +8 52 24 94 92 28email:sales@ranger.com.hkHungaryRittal Kereskedelmi Kft.Ipari Park u.1.1044-BudapestTel.: +36(1) 399 8000Fax: +36(1) 399 8009email: rittal@rittal.huIcelandSmith & Norland h/fNóatúni 4P.O. Box 519121 ReykjavíkTel.: +354 520 3000Fax: +354 520 3011email: sminor@sminor.isIndiaRittal India Pvt. Ltd.Nos. 23 & 24 KiadbIndustrial AreaVeerapuraDoddaballapurBangalore 561 203Tel.: +91(80) 76 22 33576 23 075Fax: +91(80) 76 23 343email: info@rittal-india.comIndonesiaPT Zuellig ServicesWisma Budi, 2/F202 Jl. H.R. Rasuna Said,Kav. C-6Jakarta 12940Tel.:+62(21) 5296 1448 /58 /68Fax:+62(21) 5296 1450 /60 /70email: electrical@zi-id.comIrelandRittal Ltd.Sleaty RoadGraiguecullenCarlowIrelandTel.: +353(599) 182 100Fax: +353(599) 132 090email: sales@rittal.ieIsraelRittal Enclosure Systems Ltd.15, Tarshish St. Zone 29P.O. Box 3597Industrial ParkCaesarea 38900Tel.: +9 72(4) 6 27 55 05Fax: +9 72(4) 6 27 55 35ItalyRittal S.p.A.S.P. n.14 Rivoltana-Km 9,520060 Vignate (MI)Tel.: +39(02) 95 93 01Fax: +39(02) 95 36 02 09email: Info@rittal.itJapanRittal K.K.1438-1 ShimonoharaNishi-izumidaSakai-machi, Sashima-gunIbaraki 306-0431Tel.: +81(280) 87 51 20Fax: +81(280) 87 51 08email: hotline@rittal.co.jpJordanPlease contactRittal Middle East FZEDubai/U.A.E.KuwaitPlease contactRittal Middle East FZEDubai/U.A.E.LebanonPlease contactRittal Middle East FZEDubai/U.A.E.LithuaniaRittal UABMeistru 802189 VilniusTel.: +370/ 5 2105 7205 2306 669Fax: +370/ 5 2306 665email: info@rittal.ltLuxembourgD.M.E. s.a.r.l.Distribution de matérielélectriqueZ.A.R.E. Ouest4384 EhlerangeTel.: +3 52-57 43 44Fax: +3 52-57 43 57email: dme@dme.luMacedoniaSiskon System EngineeringTaskenska 4AMK-91000 SkopjeTel.: +389/91/36 24 23Fax: +389/91/36 12 50email:siskon@lotus.mpt.com.mkMalaysiaRittal Systems Sdn. Bhd.No. 5 Jalan 4/118CDesa Tun Razak56000 CherasKuala LumpurTel.: +60(3)-9173 64 88Fax: +60(3)-9173 64 99email: sales@rittal.com.myMexicoRittal, S.A. de C.V.Prol. 5 de Mayo No. 29Parque IndustrialNaucalpanNaucalpan de JuarezEstado de México53489 MéxicoTel.: +52(55) 53 00-25 70Fax: +52(55) 53 00-04 95email: info@rittal.com.mxMoroccoS.M.R.I.Société marocaine deréalisations industrielles109, Rue Abou IshakEl Marouni20110 CasablancaTel.: +212-2 25 94 90Fax: +212-2 23 77 08email: smri@elan.net.maNetherlandsRittal bvHengelder 56Postbus 2466900 AE ZevenaarTel.: +31(3 16) 59 19 11Fax: +31(3 16) 52 51 45New ZealandRittal Ltd.5 Pretoria StreetP.O. Box 30-453Lower HuttWellingtonTel.: +64(4) 5 66 76 30Fax: +64(4) 5 66 92 19NorwayRittal ASPostboks 79 StovnerLuhrtoppen 20913 OsloTel.: +47-67 91 23 00Fax: +47-67 91 23 23email: rittal@rittal.noOmanPlease contactRittal Middle East FZEDubai/U.A.E.PeruCE-YE-SAIngenieria ElectricaAv. Enrique Meiggs255 – 257Parque Internacionalde Industria y ComercioCallaoTel.: +51(1) 4 51 79 36Fax: +51(1) 4 51 72 72email:ceyesacomercial@millicom.com.pePhilippinesEnclosure SystemsSpecialist IncorporatedG/F, GE Phils Building2291 Pasong TamoExtensionMakati City 1231PhilippinesTel.: +63(2) 8 13 85 80Fax: +63(2) 8 13 85 96email: gardex@ibm.netPolandRittal Sp. z o.o.Ul. Królewska 605-825 Grodzisk Maz.k/WarszawyTel.: +48(22) 724 27 84Fax: +48(22) 724 08 52email: rittal@rittal.plPortugalRITTALSIS-SistemasElectricos e ElectronicosUnipersonal Lda.Z.I. Rio Meao/Apdo. 4344520-907 Rio Meao.St a M a da FeiraTel.: +351 256 780 210Fax: +351 256 780 219email: info@rittal.ptQatarPlease contactRittal Middle East FZEDubai/U.A.E.Republic of SlovakiaRittal s.r.o.Plynárenská 1SK-82109 BratislavaTel.: +421(2) 5363 0651Fax: +421(2) 5363 0951email: rittal@rittalsro.skRomaniaCubrit s.r.l.Sos. Chitilei, no. 114Sector 1 – BucharestRomaniaTel./Fax: +40/21/3 12 94 97email: office@cubrit.roRussiaRittal OOOLetchika Babushkina 1a129344 MoscowTel.: +7(095) 775 02 30Fax: +7(095) 775 02 39email: info@rittal.ruSaudi ArabiaA. Abunayyan ElectricCorp.King Abdulaziz StreetP.O. Box 321Riyadh 11411Kingdom of Saudi ArabiaTel.: +966(1) 477 91 11Fax: +966(1) 479 33 12email:aec-salesmarketing@abunayyangroup.comSingaporeRittal Pte. Ltd.7 Loyang StreetLoyang Industrial EstateSingapore 508842Tel.: +65-65 42 68 18Fax: +65-65 42 68 33email: sales@rittal.com.sgSloveniaRittal d.o.o.Smartinska 152SLO-1533 LjubljanaTel.: +386/1/5466370Fax.: +386/1/5411710email: info@rittal.siSouth AfricaRittal Pty. Ltd.123, Terrace RoadSebenzaP.O. Box 462Edenvale, 1610JohannesburgTel.: +27(11) 6 09-82 94Fax: +27(11) 4 52-58 16email: info@rittal.co.zaSouth KoreaRittal Co. Ltd.1 NA 509 Sihwa-Gongdan1254-8 Jeungwang-DongSihung-Shi, Gyeonggi-DoKorea 429-450Tel.: +82(031) 4 99-59 61Fax: +82(031) 4 99-59 64email: rittal@rittal.co.krSpainRittal Disprel, S.A.Mas Baiona, 40Polígono IndustrialCan Roqueta08202 Sabadell(Barcelona)Tel.: +34(93) 700 13 00Fax: +34(93) 700 13 01email: info@rittal.esS. R. VietnamESACO Ltd.15 – 17 Tran QuocThao StreetDistrict 3Hochiminh CitySocialist Republicof VietnamTel.: +84(8) 9 30 50 80Fax: +84(8) 9 30 31 93email: esaco@hcm.vnn.vnSwedenRittal Scandinavian ab26273 ÄngelholmTel.: +46(4 31) 44 26 00Fax: +46(4 31) 44 26 37email: info@rittal.seSwitzerlandRittal AGRingstrasse 15432 NeuenhofTel.: +41 056 416 06 00Fax: +41 056 416 06 66email: rittal@rittal.chSyriaPlease contactRittal Middle East FZEDubai/U.A.E.TaiwanRittal Systems Taiwan Ltd.13 – 1 Fl., No. 87,Wen Hua 3rd Rd.Kuei ShanTaoyuan HsienTaiwanTel.: +8 86 (3) 397-1745(3) 327-8871Fax: +8 86 (3) 397-2019email:sales.inform@rittal.com.twThailandRittal Ltd.101 Soi 7, Saeree 7Rama 9 RoadKwaeng SuanluangKhet SuanluangBangkok 10250Tel.: +66 (2) 7183 296(2) 7183 297Fax: +66 (2) 7183 298email: info@rittal.co.thTurkeySTOKS Ltd.Zümrütevier Mah. VisneSok. No: 581530 MaltepeIstanbul/TurkeyTel.: +90(2 16) 44170094515739Fax: +90(2 16) 4591290email:gsavas@stoks.com.trUkraineAdvanced NetworkTechnologyScherbakova Str. 3704111 KievTel.: +38(44) 495 11 36Fax: +38(44) 443 95 22USARittal CorporationOne Rittal PlaceSpringfield, OH 45504Tel.: +1(9 37) 3 99-05 00Fax: +1(9 37) 3 90-55 99email: rittal@rittal-corp.comUzbekistanNaytov Ltd.Ul. Matbuotschilar 32700047 TaschkentTel.: +9 98/71-132 08 56Fax: +9 98/71-132 08 59VenezuelaEMIEquipos y sistemas C. A.Edificio Centro Cyanamid,P.B. Calle 1 – 2La Urbina – 1073 CaracasTel.: +58(212) 243 64015072Fax: +58(212) 243 6401YemenPlease contactRittal Middle East FZEDubai/U.A.E.YugoslaviaVesimpex d.o.o.Petra Konjovica 12 v11090 BeogradTel./Fax:+3 81/11/35 10 683email:info@vesimpex.co.yuRittal TE 700031

Interested in receiving more informationon the TE 7000, the Global IT Rack from Rittal?Individual customer advice is one of our core philosophies. We will advise you at every stage of your project, and work with you to formulateoptimum solutions. Take advantage of our customer service.Simply fax this form to us, or send us an eMail.NameCompanyDepartmentAddressI have some specific questionsregarding the Global IT Rack TE 7000.❑ Please arrange for a specialist advisor to visit me❑ Please call me backPlease send me your brochure❑ “IT News 2004”❑ “CMC Top Concept”Tel./faxeMailRittal has one of the largest ranges of enclosures available for immediate delivery. However, Rittal also supplies integral solutions at a highlevel – up to Level 4. Fully assembled and functional, tailored to your specific requirements. Wherever your location.The global alliance between production, distribution and service guarantees customer proximity. World-wide! Wherever in the world youdevelop and implement solutions for yourself and your customers, we are close at hand.Rely on the all-round competence of a strong partner:Industrial enclosuresPower distributionElectronic packagingIT solutionsSystem climate controlCommunication systems03/04 04A4Rittal LimitedBraithwell Way, Hellaby Industrial EstateHellaby, Rotherham, S66 8QYTelephone: 01709 704000Telefax: 01709 701217eMail: information@rittal.co.ukwww.rittal.coR