HILCO ONLINE AUCTION - Maynards Industries

HILCO ONLINE AUCTIONEXCESS MACHINERY FROM (20) FACILITIES!!Assets no longer required in the continuing operations ofAUCTIONEERS • LIQUIDATORS • APPRAISERS21700 Northwestern Hwy • Suite 1180Southfield, Michigan 48075-4923Ph 248.569.9781 • Fx 248.569.9793www.maynards.comSale is being held in conjunction withINDUSTRIALCONTROLREPAIR28691 Lorna AvenueWarren, Michigan 48092-3931Ph 586.751.3335 • Fx 586.751.3368www.industrialcontrolrepair.comHilco Industrial, LLCAuctioneers • Liquidators • Appraisers31555 West Fourteen Mile Road, Suite 207Farmington Hills, Michigan 48334Ph 248.254.9999 • Fx 248.254.9995www.hilcoind.com

HILCO ONLINE AUCTIONAssets no longer required in thecontinuing operations ofHYDRAULIC & TRIM PRESSES1999EXCESS MACHINERY FROM(20) FACILTIES!Online Bidding StartsThursday, December 11that 10am Local TimeOnline Bidding EndsTuesday, December 16thPlease check www.hilcoind.comfor closing times.PreviewBy appointment only December 8thto December 15th. To schedule anappointment please contactDale Noel at 248.254.9999x18or Email dnoel@hilcoind.comAsset Preview LocationsLocations in Michigan, Ohio, Indiana,Delaware, Illinois and Mexico.For a complete listing of locations& lot catalog please visitwww.hilcoind.comFurther Information• A buyer’s premium will be in effect.The auction will be conducted online inEnglish, accepting U.S. Currency only.• All items are subject to Chrysler’sapproval. Chrysler reserves the rightto reject any or all items sold.• Removal is by appointment only.All Removal appointments must bemade by December 23, 2008. Finalremoval plan will need to be approvedby the plant before any assets can beremoved. All assets must be removedbefore January 30, 2009. After January30th at 4pm buyer will incur a cost of$500 daily for entry into the facility.• For further information or to schedulea preview appointment please contactDale Noel at 248.254.9999 x18 orEmail dnoel@hilcoind.com• For Payment & Customer Serviceplease contact Sandi Neely at248.254.9999 x16 or Emailsneely@hilcoind.comWILLIAMS & WHITE 2200-TONHYDRAULIC PRESSVERSON MODEL T54-1500-288-96T1500-TON STRAIGHT SIDE PRESSSCHULER SMGTYPE HPU-T1500-144/1441686-TONOIL/HYDRAULICSINGLE-ACTIONDRAWING PRESSHYDRAULIC PRESSES1 – SCHULER SMG TYPE HPU-T 1500-144/144 1686-TON OIL/HYDRAULIC SINGLE-ACTION DRAWING PRESS,S/N 7.5360 (1999), Maximum Stroke 39”, Slide Closing Speed 118 Ft./Min., Working Speed Maximum 19 Ft./Min,Working Speed Minimum 11 Ft./Min., Die Area Maximum 144” x 144”, Die Area Minimum 96” x 96”, Die Shut HeightMinimum 41”, Installed Power Rating 1500 HP, Nominal Current 1730a, 480 Volt, 60 Hz , With Loader S/N 7.5361,3-Axis Transfer S/N 7.5362 , Die Change System S/N 7.53811 – WILLIAMS & WHITE 2200-TON HYDRAULIC PRESS, S/N N/A (1998), Deactivated 2003, 36" Stroke, 80” ShutHeight, 68” Shut Height Over Bolster, 48" X 48" Bed & Ram, 200 HP, Tie Rod Construction, 12" T-Slotted Bolster,500 IPM Down, 6-60 Vac IPM Press, 30-150 IPM Return, A#3294211 – WILLIAMS & WHITE 2200-TON HYDRAULIC PRESS, S/N N/A (1998), Deactivated 2003, 36" Stroke, 80” ShutHeight, 68” Shut Height Over Bolster, 48" X 48" Bed & Ram, 200 HP, Tie Rod Construction, 12" T-Slotted Bolster,500 IPM Down, 6-60 Vac IPM Press, 30-150 IPM Return, A#AAA0048111 – VERSON MODEL T54-1500-288-96T 1500-TON STRAIGHT SIDE PRESS, S/N 29108, 30” Stroke, 9-18 Strokes PerMinute, 75” Shut Height, 2” Adjustment, 288” X 96” Bolster, A# N/A1 – DAKE ELEC-DRAULIC MODEL 5-075 H-FRAME HYDRAULIC PRESS, S/N 172643 (1977), A# AAA2D41261 – TESCO MODEL 02-DR-02-1040-L HEM PRESSES, (2004), Line Voltage 480/3/60, Control Voltage 120/1/60,190-Amp, 153 Total HP1 – TESCO MODEL 02-DR-02-1040-L HEM PRESSES, (2004), Line Voltage 480/3/60, Control Voltage 120/1/60,190-Amp, 153 Total HPTRIM PRESSES1 – PH HYDRAULIC MODEL 4C 30-TON HYDRAULIC TRIM PRESS, S/Ns 121 (1994), A# 3145301 – PH HYDRAULIC MODEL 4C 30-TON HYDRAULIC TRIM PRESS, S/Ns 122 (1994), A# 3145321 – KOHOL 40-TON TRIM PRESS, S/N 301 (1995), A# 3145931 – KOHOL 40-TON TRIM PRESS, S/N 306 (1995), A# 3145981 – RIMROCK MODEL 315 TRIM PRESS, S/N 17 (1997), A# 6252201 – RIMROCK MODEL 315 TRIM PRESS, S/N 27 (1997), A# 3252212For more information, visit us on the web @ www.hilcoind.com

CRANKSHAFT LINE • CYLINDER BLOCK LINE • CNC CHUCKERSVIEW OF THE STEERING COLUMN ASSEMBLY LINEHARDINGE MODEL CONQUESTVT100 CNC CHUCKERSVIEW OF THE CRANKSHAFT LINEVIEW OF THE CYLINDER BLOCK LINEAUTOMOTIVE STEERING COLUMNASSEMBLY LINE1 – STEERING ASSEMBLY LINE, (2003), With AB Panelview 1000 PIC Controls,Techmotive Tool, Nut Runners With AB Panelview 600 PIC'S, (33) Bosch, AntistaticPallets, Bosch Conveyor System, DT Industries Assembly & Test Systems, AdvancedAssembly Automation, Currently Operational and In Service, 98" X 85" Footprint,Approx. 21 Stations On Each LineCRANKSHAFT LINE1 – 4.7L V8 CRANKSHAFT LINECYLINDER BLOCK LINE1 – 4.7L V8 CYLINDER BLOCK LINE, Over 100 StationsENGINE ASSEMBLY LINE1 – COMPLETE 6.1 LITER ENGINE ASSEMBLY LINE, Including: Conveyor, MainBearing Cap Bolt, Oil Pump, Front Cover, Oil Pan Bolt, Rocker Shaft, Piston, Pin andConnecting Rod Assembly, Cold Test StationPISTON LINES2 – MAHLE PISTON LINES, One Line Complete, 7 Stations Plus Test Station, Including:Rough Pin Bore CNC Machine, Finish O.D Loaders, Finish Pin Bore CNC Machine,Deburr CNC Machine, Washer with Simens Sinumerik CNC Controls, InspectionStation1 – MICROPRECISION PISTON SUB ASSEMBLY LINE, (2007), For 5.7 L EagleEngine Assembly – OP30, Assembles Connecting Rod to Piston and Pin, 12,000Parts/Hour, All Controls, Models (10) SH200, (4) SC400, Buyer Responsible ForRemoval , A# AAA279155VALVE ASSEMBLY LINE1 – INGERSOLL RAND TRANSMISSION VALVE BODY ASSEMBLY LINE,A# AAA023097 AND ASSOCIATED,AUTOMOTIVE REPAIR1 – KNIGHT ERGO ASSIST SWAY BAR LINK, Tool #7XKA7411-011 (NEW), A#133279332 – KNIGHT TORQUE ARMS, (2005), Tool #8009, Trans Cross Member O/B Torque Arm,Rear Axle Shock, AAA2741381 – KNIGHT 4-SPINDLE MULTIPLE TORQUE ARM, (2006), Tool #7XKA8503-014, TransCross Member Torque Arm, AAA2741431 – KNIGHT ERGO ASSIST SWAY BAR LINK, Upper Control Arm Secure, Tool#7XKA7401-0131 – ARKK MODEL DV-MPA5015.004-AAB-0X VISION SYSTEM, SN 53898065 (1977),Buyer Responsible For Removal, A# AAA2362792 – EYSE MODEL 7XHBNK9150-009 WD 13659 TIRE PRESSURE MONITORING &INSTALL SYTEMS, Auto-Oriented Station, TPMS Nut Secure1 – MICROPOISE MODEL 3700D AUTOMATED TIRE BALANCING LINE, EastBalancing Line SN 4389, 90 Tires/Hour – 18" Wheel Max. Size, 480/3/601 – MICROPOISE MODEL 3700D AUTOMATED TIRE BALANCING LINE, WestBalancing Line SN 4390, 90 Tires/Hour – 18" Wheel Max. Size, 480/3/601 – HUNTER MODEL DSP9500 TIRE BALANCER, With Split Weight, A# AAA0275671 – HUNTER MODEL TC350 MANUAL TIRE BALANCER, A# AAA027805CNC CHUCKERS2 – HARDINGE MODEL CONQUEST VT100 CNC CHUCKERS, AB 9 series CNCControls, 12 ATC, In-base coolant, A#s AAA113668, AAA1254653 – YASUNAGA CNC CHUCKERS, S/Ns N/A, Turrets with Fanuc Series 18iMB CNCControls, Includes Conveyors, A#s AAA182640, AAA182641, & AAA182642To schedule an auction, please contact us at 248.254.9999 3

MACHINING & TURNING CENTERS • CYMONIC DRIVES1999(1 OF 2) CHIRON FZ 12S FLEXLINECNC MACHINING CENTER FLEX VALVE BODY LINES(1 OF 7) HITACHI SEIKI MODEL HG400IIMACHINING CENTERS(3) CHIRON MODEL FZ18WMAGNUM HIGH SPEEDHORIZONTAL MACHINING CENTERSOKUMA MODEL LR15 HARD TURN4-AXIS CNC TURNING CENTEROKUMA MODEL LU15 4-AXISCNC TURNING CENTER(1 OF 4) EASOM MODEL S400CYMONIC DRIVESDELTA MODEL 304-177VERTICAL BAND SAWMACHINING CENTERS2 – CHIRON FZ 12S FLEXLINE CNC MACHININGCENTER FLEX VALVE BODY LINES, Consistingof (8) Chiron High Speed Machining Centers(ALL 1999), With AB 9 Series CNC Robots, 12ATC, 4 Axis, Automated Parts Transfer System,(1) Henry Filter Coolant Filtration System RunsBoth Lines, A#s AAA035536, (USES AAA044069,AAA003053)7 – HITACHI SEIKI MODEL HG400II MACHININGCENTERS, Fanuc Series 1500M CNC Controls,40" Taper, 16" x 16" Dual Pallet System, ChipConveyor, 30 ATC, A#s AAA800909, AAA800810,AAA800811, AAA800812, AAA800813,AAA800814, AAA800815CNC HORIZONTAL MACHINING CENTERS3 – CHIRON MODEL FZ18W MAGNUM HIGHSPEED HORIZONTAL MACHINING CENTERS,With GE/Fanuc Series 21i-M CNC Controls,25"x32" Dual Pallet System and Chip Conveyor,A#AAA089826, AAA089827, AAA089828BUYER’S NOTE:The Equipment in this Brochure isLocated at Various Chrysler Facilities.Please visit www.hilcoind.com for thelot catalog and location of the items.TURNING CENTERS1 – OKUMA MODEL LR15 HARD TURN 4-AXIS CNCTURNING CENTER, S/N N/A, A# 2614741 – OKUMA MODEL LR15 HARD TURN 4-AXIS CNCTURNING CENTER, S/N N/A, A# 2614811 – OKUMA MODEL LU15 4-AXIS CNC TURNINGCENTER, OSP CNC Control, S/N N/A,A# AAA0322101 – OKUMA MODEL LU15 4-AXIS CNC TURNINGCENTER, S/N N/A, OSP CNC Control1 – OKUMA MODEL LU15 4-AXIS CNC TURNINGCENTER, S/N N/A, OSP CNC Control1 – OKUMA MODEL LU15 4-AXIS CNC TURNINGCENTER, S/N N/A, OSP CNC Control2 – CINCINNATI MODEL AVENGER CNC 2-AXISTURNING CENTERS, (1997), with GE Fanuc ModelATT CNC controls, LNS hydro bar feeders,A#s N/A2 – CINCINNATI MODEL AVENGER CNC 2-AXISTURNING CENTERS, (1997), with GE Fanuc ModelATT CNC controls, LNS hydro bar feeders, 1 unit hasbeen parted out partially, A#s N/ABAND SAWS1 – DOALL MODEL 2013-V VERTICAL BAND SAW,SN 457-911779, 20” Throat, A#2773461 – MARVEL MODEL SERIES 8 MARK 2 VERTICALBAND SAW, 18” Throat, A# 2858171 – DAKE JOHNSON VERTICAL BANDSAW,S/N VH40-001 (1998), 41" Throat, Butt Welder &Grinder1 – 27" BAND SAW, AAA0404491 – 20" VERTICAL BAND SAW, A#AAA040456PRESS ACCESSORIES1 – T-SLOTTED 180” X 96” X 12” BOLSTER PLATE,Installed in Danly 19A Press (#275471-000)CYMONIC DRIVES1 – EASOM MODEL SL-100 CYMONIC DRIVE,SN SL100-17-MWS100-28-680-2894 – EASOM S400 CYMONIC DRIVES, 120000 Ratio5 – EASOM L200 CYMONIC DRIVES, 27.6/2.0 RatioROTARY SURFACE GRINDER1 – BLANCHARD #18 36" ROTARY SURFACEGRINDER, A# 305279TOOLROOM MACHINERY1 – CLEEREMAN SINGLE SPINDLE FLOOR TYPEDRILL PRESS, A# 510005431 – AVEY MODEL 2 SINGLE SPINDLE DRILL PRESS,S/N 96051, #2 MT, 24" X 24" Table1 – GARDNER DOUBLE DISC GRINDER, 30" wheels,A#1805411 – FUJI LATHE, A#AAA0481611 – BAIRD MODEL 78H, 8 SPINDLE LATHE, Machines2- 5" Diameter Pistons every 7 seconds1 – LINCOLN VERTICAL MILLING MACHINE,A# AAA3158891 – MILWAUKEE 8" BLADE PANEL SAW, 128" Travel,Electric1 – WALKER TURNER 3220 BAND SAW, A# 550002481 – DAKE JOHNSON VERTICAL BAND SAW, (2006),A# AAA2676561 – DELTA MODEL 304-177 VERTICAL BAND SAW1 – DOALL MODEL C305-M HORIZONTAL BANDSAW, (1993), A# 3115071 – DELTA MODEL 438-02-314-2034 TABLE SAW1 – KOLLE MASCHARNBAU FORMATIC TABLE SAW1 – BETENBENDER SHEAR4 For more information, visit us on the web @ www.hilcoind.com

GEAR EQUIPMENT • CMMS • TEST & INSPECTION • ROBOTSDEA BRAVO MODEL 4308 105 DUAL ARM5-AXIS COORDINATE MEASURING MACHINELASER PRODUCTION CELL, INCLUDING (3) ROBOTS, (2) LASER MACHINES(1 OF 8) PHOENIX MODEL 175HCCNC GEAR CUTTERS(2) FANUC MODEL S-420I-F ROBOTSWHEELABRATOR &DUST COLLECTORWHEELABRATOR MODEL 22 SUPER 11ROTOBLAST MACHINEGEAR EQUIPMENT8 – PHOENIX MODEL 175HC CNC GEARCUTTERS, S/Ns 926806, 7 – N/A (1997-1998), A#s AAA019707, AAA016378,AAA017376, AAA001863, AAA010087,AAA032221, AAA003864, AAA010085,2 – RED RING GEAR SHAVERS, A#s 192183,180955COORDINATE MEASURINGMACHINES1 – DEA BRAVO MODEL 4308 105 DUALARM 5-AXIS COORDINATE MEASURINGMACHINE, With Renishaw Probes,A# 3052781 – DEA BRAVO MODEL 1100 3-AXIS DUALARM COORDINATE MEASURINGMACHINE, With Renishaw Probes,A# 305288TEST AND INSPECTIONEQUIPMENT23 – KRAUT KRAMER BRANSON USD-15ULTRASONIC FLOW DETECTORS,Complete with Cables and Probes1 – BRUNSON INSTRUMENT COMPANYMODEL 376RHN UNIVERSAL TRANSIT,Including Interchangeable Eyepiece andLight Attachement For Straight or RightAngle Viewing, Collimation, Auto-Collimation and Reticle Projection1 – LASER PRODUCTION CELL, Including(3) Robots, (2) Laser MachinesOVER 20 ROBOTS1 – ABB MODEL IRB6400S ROBOT, (2004), A# AAA1069483 – KUKA MODEL KE150 ROBOTS, KE150/2 ZUA 439/101Robot and Controller A#s AAA166410, AAA234111,AAA2341121 – NACHI MODEL AW ROBOT, With Teach Pendants,A# AAA181206 (ROBOT), AAA181200 (CONT)1 – NACHI MODEL AW ROBOTS, With Teach Pendants, Pedestaland pendulum, A# AAA181208 (ROBOT), AAA181201 (CONT)1 – NACHI MODEL AW ROBOTS, With Teach Pendants, Pedestaland pendulum, A# AAA1871741 – NACHI MODEL AW ROBOT CONTROLLER, A# AAA1871744 – NACHI MODEL AX10 ROBOTS, Nacchi SG160R-04 RobotsWith AX10 Controllers, Cables and Teach Pendants,A#s AAA279639, AAA279640, AAA279641, AAA2796381 – NACHI MODEL AW ROBOT, With Teach Pendants,A# AAA18102310 – NACHI MODEL SH200 ROBOTS, Teach Pendants, AX10Controllers, Risers Not Included1 – NACHI MODEL SH116-03-AX10-511 ROBOT, Never used2 – ABB ROBOTS, Extended Arm, Shelf Mount (Parts Use), A#s N/A2 – FANUC MODEL S-420i-F ROBOTS, Teach Pendants &Cables, A#s AAA004062 AND AAA004063For more information including lot catalog & photos,sale terms & conditions, please visitwww.hilcoind.comWELDING2 – LINCOLN POWER WAVE 450 PORTABLE ARCWELDERS, A#s AAAA233869, AAA2338701 – LINCOLN IDEALARC R3R-400 400-AMP ARCWELDER7 – HOBART 500-AMP ARC WELDERS, ModelARC6045V ASM3 – HOBART 500-AMP ARC WELDERS, Models 5011 – ACRO CUSTOM DESIGNED MACHINERY &CONTROL SYSTEM, For Production Welding,A# AAA2041264 – WELD WATER CARTS, 515 Gallon With Hoses,Frame is 10 foot by 5 foot, A#s AAA295189,AAA295188, AAA295187, AAA295186FINISHING,DUCT COLLECTION EQUIPMENT1 – WHEELABRATOR MODEL 22 SUPER 11ROTOBLAST MACHINE, A# 2470791 – WHEELABRATOR & DUST COLLECTOR, 18' Tall,Buyer Responsible For Removal, A# 1282021 – WHEELABRATOR DEBURRING MACHINE,A# 47008991 KTP3 – MONROE ENVIRONMENTAL DUST/MISTCOLLECTION SYSTEMS, Compact Oil MistCollection System, 2500-CFM, (2) 400-CRM Filters,(1) 800-CFM Filter. ITPII, A#S AAA176177,AAA176181, AAA1751821 – VIBRATORY BOWL FEEDERTo schedule an auction, please contact us at 248.254.9999 5

MISC. • BRIDGE & MOBILE CRANES • MATERIAL HANDLINGSAHLIN 72" SIDE X 10' LONG MOTORIZEDTELESCOPING CONVEYOR(1 OF 2) THERMALDEVICE INFRA-ARMINFRA-RED HEATERSWHITING 50-TON X 60' DOUBLEGIRDER BRIDGE CRANEROTARY VEHICLE HOIST SP09-2009000-LB. CAPACITY LIFT SYSTEMSBROADERSON MODEL M1JACK MOBILE CRANESTRATO-LIFT MODEL SB-35R REACH TRUCKRAYMOND FORKLIFT 12,000-LB. CAPACITYMISCELLANEOUS1 – ARCO STUD PRESS LINE, (2004) A# AAA1828851 – ALLSTEEL 1” TO 6” CAPACITY PIPE BENDER, Hydraulic, Manual Feed,A# AAA10066471 – MAYFRAN MODEL CONSEP 2000 CHIP CONVEYOR/SEPARATOR,18" Wide, 480 Volt1 – DIE-MATION ENGINEERING MOTORIZED BELT CONVEYOR, 36” Wide X130” Long1 – CONVEYOR1 – AMERICAN MATERIAL HANDLING 48" MOTORIZED BELT CONVEYOR,231" Long2 – SAHLIN 72" SIDE X 10' LONG MOTORIZED TELESCOPING CONVEYOR,On Rollers2 – TITAN INDUSTRIES POWER ROLLER CONVEYORS, Rubberized Belt18" Wide X 156" Long1 – ONAN 25KW PROPANE MODEL 30EC9R82335M GENERATOR, comes with200lb propane bottle and 1,148 sq. ft. enclosure (approximately 10 foot X 10 footX 30 foot), A# 85C83978626 – BOSCH REXROTH HYDRAULIC CYLINDERS, Various Sizes1 – IRT MODEL IRT-400 INFRA-RED HEATER, On Rollers2 – THERMAL DEVICES MODEL INFRA-ARM INFRA-RED HEATERS, On Rollers11 – BROKAW CONTROL SYSTEMS INFRA-RED HEATERS, On Carts1 – RIMROCK MODEL 305 LADLER, A#AAA042054160 – SOUND DEADENING PANELS, 4 foot by 2 foot, A#AAA2341361 – TMI PENTHOUSE UNIT AIR HANDLING EQUIPMENT, A# AAA2743221 – VASCOR-STICKNEY FREE STANDING TENT TUNNEL, (1999), Minor holes,A# AAA052188BRIDGE & MOBILE CRANES1 – WHITING 50-TON X 60' DOUBLE GIRDER BRIDGE CRANE, (1993), With 20-TonAuxiliary Hook, Wireless Pendant Control, A# 2887881 – BROADERSON MODEL M1JACK MOBILE CRANE, 30,000-Lb. Capacity, 40' LongReach, Pneumatic Tires (1985)MATERIAL HANDLING1 – RAYMOND FORKLIFT 12,000-LB. CAPACITY, Buyer Responsible For Removal,A# AAA1993851 – FORKLIFT 8,000-LB. CAPACITY, Buyer Responsible For Removal, A# AAA1994431 – YALE TYPE D CAPACITY FORK LIFT TRUCK, S/N 5021352-07, 2-Stage Mast,Hard Tires, Overhead Guard1 – SIMON MODEL MPN55 AERIAL BOOM LIFT, S/N N102, A# 2246631 – STRATO-LIFT MODEL SB-35R REACH TRUCK1 – ECONOMY #109 SCISSOR LIFT, A# AH681944 – ROTARY VEHICLE HOIST MODEL SP09-200 9000-LB. CAPACITY LIFT SYSTEMS,Above Ground Hydraulic With Adjustable Feet, A#s AAA124238, AAA124239, AAA124240,AAA1242944 – AIR FLOAT LIFT & TILT TABLES, (2004), A#s AAA172860, AAA172861, AAA172862,AAA1728638 – SHAW-BOX HOISTS, (5) 6-Ton, (3) 4-1/2 Ton1 – SAHLIN 50-TON CAPACITY DIE CART, 12' long x 6' Wide, Hard Tires4 – SOUTHWORTH MODEL #ROLL C4-28, ROLL-ON LEVEL LOADERS, 4000 LB Load,5 Foot by 5.5 Foot, A#s AAA290199, AAA290200, AAA290201, AAA2902021 – TEXTRON/EZ-GO MODEL 957 ELECTRIC 8-PASSENGER UTILITY CART, A# C-19APPROX. 45 – TOPPER 1,500 TO 2,000 LB. CAPACITY PNEUMATIC LIFT TABLESLOT – MATERIAL HANDLING LIFTS AND RACKS6 For more information, visit us on the web @ www.hilcoind.com

FLOOR SCRUBBERS & SWEEPERS • WAREHOUSE & PLANT • CAFETERIATENNANT MODEL 7400 LPG RIDER TYPEFLOOR SWEEPERAMERICAN CONTROLSEVAC MACHINEHADEN SCHWTZER 6-STATIONPAINT SLUDGE DRYER SYTEMUSI CLEARING MODEL 150T150-TON OBI PRESSFLOOR SCRUBBERS AND SWEEPERS1 – CLARKE-AMERICAN LINCOLN MODEL3366SP RIDER TYPE GAS & LPG FLOORSWEEPER1 – TENNANT FLOOR CLEANER MODEL L2 LPGSTAND-UP RIDING FLOOR SCRUBBER, S/N1463, A# 2200021 – CLARKE-AMERICAN MODEL 7000 LPGRIDER TYPE FLOOR SWEEPER, A# 2405601 – CLARKE-AMERICAN MODEL 7700 LPGRIDER TYPE FLOOR SWEEPER, A# 2814611 – TENNANT MODEL 7400 LPG RIDER TYPEFLOOR SWEEPER, A# 000310839-00272 – TENNANT MODEL 5700XP WALK BEHINDFLOOR SCRUBBERS2 – TENNANT MODEL 8010 ES FLOOR SWEEP-ERS/ SCRUBBERS2 – TENNANT MODEL 550 FLOOR SCRUBBERS2 – TENNANT MODEL 6550 FLOOR SWEEPERS1 – TENNANT MODEL 7400 RIDING FLOORSWEEPER, A# AAA0642631 – TENNANT 5400 WALKBEHIND SCRUBBERFor more information including lot catalog & photos,sale terms & conditions, please visitwww.hilcoind.comWAREHOUSE AND PLANT EQUIPMENT2 – DOMINION TOOL DC POWER TOOL CARTS, With PC Computers, A#s AAA089803, AAA0868812 – TECHJET COLOR PLOTTERS, (1) 5500, (1) Color GT1 – COMPACTING TECHNOLOGIES 23” DIAMETER X 55-GALLON DRUM CAPACITY SCRAP COMPACTOR, A# 322397Lot – 15 SKIDS – CABLE TRAYS, Average Length 12'2 – NLB MODEL 20253-7/8 20,000-PSI CARRIER WASHER PUMPS, S/Ns 698121-1 & 694021-1, 50-HP, 1782-RPM,US Electric Motors, Frame Size 50086 With Sound Enclosures, A#s AAA006052, N/A1 – AMERICAN CONTROLS EVAC MACHINE, S/N 47882 (2000-NEVER USED), Fuel Fill System – Vapor Destruct Station,A# AAA0371941 – SPX ROBINAIR MODEL COOLTECH 700 PORTABLE REFRIGERANT EVACUATOR, (2001) (R-134A),A# AAA1005702 – FLOWSTAR MODEL BR4CV6FLPL FILTER SYSTEMS, (2001), CARBON STEEL, 6: FLANGED CONNECTIONS, FilterElements: B1353, 8 per tank, MAWP 150psi @ 200F, MDMT -20f @150psi, 1,400 GPM per tank, A#s AAA191951,AAA1919521 – FLOWSTAR FILTER SYSTEM MODEL BR4CV6FLPL, (2001), CARBON STEEL, 6: FLANGED CONNECTIONS, Filterelements: B1353, 4 per tank, MAWP 300psi @ 200F, MDMT -20f @300psi, 700 GPM per tank, A# AAA1919551 – LOCTITE POROSITY SEALING SYSTEM, 5 Tanks, Used to Coat Parts, A# AAA2004574 – ASE INDUSTRIES WASHERS, 480/3/60, Non-PCB, A#s AAA101097, AAA092572, AAA102034, AAA0038581 – ASE INDUSTRIES SINGLE STAGE ROTARY WASHERS, SN 8001, 8002 (Both 2004), 480/3/60, A# AAA18363610 – ELECTRIC MOTORS15 – STERLING COMPANY MODEL M2B2016-M1 HOT OIL UNITS, (2007)4 – STERLING COMPANY MODEL M2B2016-M1 HOT OIL UNITS, (2007)1 – DIEBOLD COMBINATION SAFE, 36” X 54” Opening, 24” Deep, A# 6701555233 – CARDBOARD BALERS, Capacity 43 yards, Less Than 100 Hours, A#s AAA166913, AAA166913, AAA1669131 – HADEN SCHWTZER 6-STATION PAINT SLUDGE DRYER SYTEM, (2005 – Not Used), 30' X 60' Footprint,50-HP Main Motor drive, Northern Blowers, 69.7 HP Exit Motor, Hardy Instruments Model 2151/30WC Weight Controls,Honeywell Burner Control, Oxidizer Burner Combustion Air Blower, Torit 6-Station Air Dust Collector, For EnvironmentalUse, A# AAA29859220 – HOIST EQUIPMENT COMPANY 1/2-TON HOISTS40 SECTIONS – BUSS DUCT, 6' to 10' Lengths (Never Used)1 – GENERAL ELECTRIC MODEL 21551050 5-KVA TRANSFORMER1 – USI CLEARING MODEL 150T 150-TON OBI PRESS, Bed Size 30” X 50”, T- Slotted Ram Size 24” X 34”, T-Slotted Bolster30” X 50” X 4-1/2”, A# 1023892 – GENERAL ELECTRIC 7.5 MW TRANSFORMERS1 – PICTURETEL MODEL 400EX VIDEO CONFERENCE CAMERA AND 2 – SONY TRINATRON MODEL KV32S12MONITORS, includes wireless keyboard, and multidirectional microphone/speaker, A# AN9911CAFETERIA EQUIPMENT2 – SAN-SON FLAT TOP BURNERS2 – SAN-SON GAS STOVES4 – STAINLESS STEEL TOPS5 – SERVING STATIONS8 – STAINLESS STEEL SINKS1 – HOBART DISHWASHING SYSTEM1 – HOBART MIXER56 – CAFETERIA TABLES WITH SEATSCafeteria Tables, Misc. Pots and Pans, BowlsTo schedule an auction, please contact us at 248.254.9999 7

Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX) • Leeds (UK)London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Southampton (UK) • Toronto • Villahermosa (MX)Hilco Industrial, LLCAuctioneers • Liquidators • AppraisersHeadquarters31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 248.254.9999Fx: 248.254.9995www.hilcoind.comPresortedFirst Class MailU.S. PostagePAIDDetroit, Mich.Permit No. 100Forwarding Service RequestedHILCO ONLINE AUCTIONEXCESS MACHINERY FROM (20) FACILITIES!!Assets no longer required in the continuing operations ofTerms of SaleA buyer’s premium of 16% is in effect. Everything willbe sold to the highest bidder for cash at this onlineauction, in accordance with the Auctioneer’scustomary “Terms of Sale”, copies of which will beposted on the website at www.hilcoind.com. All itemswill be sold “as is, where – is” without any warranties,express or implied. Although obtained from sourcesdeemed reliable, the Auctioneer makes no warranty orguarantee to the accuracy of the information hereincontained. Bidders are encouraged to thoroughlyinspect the items on which they intendto bid prior tosale. Absolutely no items will be removed untilpayment is made in full. Please visit www.hilcoind.comfor removal dates and times. Subject to additions,deletions and prior sale.Payment: ALL PURCHASES MUST BE PAID IN FULLON THE DAY OF THE AUCTION. If you intend to payby wire transfer, we will accept payment the day afterthe sale ONLY IF a deposit of 25% of total purchasesis made on the day of the sale. Contact our office forwire transfer instructions. Only cash, wire transfer orcertified check, payable to Hilco Industrial, LLC will beaccepted. Company checks payable to Hilco IndustrialLLC will be accepted only if accompanied by a bankletter of guarantee, (see sample letter below). All salesare subject to sales tax. Purchasers claimingexemptions from taxes must provide proof satisfactoryto the Auctioneer of their entitlement to claim suchexemptions.Sample Bank Letters(Bank Name) unconditionally guarantees payment toHilco Industrial, LLC from (Company Name). Thisguarantee will be valid for purchases made at theOnline Auction of Chrysler on December 16, 2008.HILCO Industrial, LLC is a division of Hilco Trading, Co. • Headquarters 5 Revere Drive, Ste. 430 • Northbrook, IL 60062All rights reserved • Printed in USA • CHRY3356 • IL License #444000215Please visit our website at www.hilcoind.com to review our complete terms and conditions.