Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...
Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...
Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 3Upgrading <strong>Picture</strong> <strong>Perfect</strong> version 4.0/4.5.1 to <strong>4.6</strong>39Follow the instructions in <strong>Picture</strong> <strong>Perfect</strong> <strong>4.6</strong> Installation <strong>Manual</strong>, Chapter 6, “Installing<strong>Picture</strong> <strong>Perfect</strong> <strong>4.6</strong>”, section “Installing the <strong>Picture</strong> <strong>Perfect</strong> base package".Note 1: Set up database sizes according to old retrieved sizes as described in Prerequisites on page 26, item 3,Database table sizes, plus expected growth and new History sizes where applicable.Note 2: Restore the base and badge converted database.IMPORTANT: If this is a subhost with high level latency (>150 ms, overseas server),restore base converted database only.Note:APB status, Last Access data will be lost since that data is not replicated and is being recovered in thisprocess from the nethost6. License the system.7. DO NOT REBOOT. This prevents <strong>Picture</strong> <strong>Perfect</strong> from starting up and attempting to connectto the micro controllers.8. Perform a database cleanup to remove old host records and make sure the id of the systemconfiguration record is correct. Use the following steps:a. Set <strong>Picture</strong> <strong>Perfect</strong> profile:. /cas/bin/profileb. Start up the database by running the command:su - ppadmin -c oninitc. Remove all host records by running the command:/cas/bin/sqlstmt "DELETE FROM host"d. Reset system the config record id to 1:/cas/bin/sqlstmt "UPDATE system_config SET id = 1"e. Stop the database by running the command:su - ppadmin -c "onmode -ky"9. Perform the optional package installation (subhost, impexp, image), restore the database(s)where applicable, and reboot the server when requested.Follow the instructions in <strong>Picture</strong> <strong>Perfect</strong> <strong>4.6</strong> Installation <strong>Manual</strong>, Chapter 6, “Installing<strong>Picture</strong> <strong>Perfect</strong> <strong>4.6</strong>”, section “Installing optional packages and interfaces".10. DO NOT REBOOT. This prevents <strong>Picture</strong> <strong>Perfect</strong> from starting up and attempting to connectto the micro controllers.Note:Before proceeding with the next section to configure the new subhost into the system, check for primary keyconditions using the following command: /cas/er/bin/chkpk.shIf any issues are detected, contact UTC Fire & Security Customer Support.
Change language