Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...

More documents

Recommendations

Info

34Picture Perfect 4.6 Enterprise EditionUser ManualUpgrade version 4.0 to 4.6 with spare serversOnce all items listed under Prerequisites on page 26 are in place, follow the steps below to upgradeyour Picture Perfect 4.0 Enterprise system to version 4.6.Note:The nethost server must be the first server to be upgraded to the new version.A. Determine the downtime schedule and inform all operators of the downtime schedule(database freeze schedule)The downtime can be estimated based on the size of the database to be converted and otherfactors, such as the time to reinstall the new OS version, reusing the same servers, and latencybetween nethost and subhost to be configured.In a scenario with a database containing 500K person records, no network latency, re-using thesame servers requiring OS installation, we can calculate a downtime between 4 to 6 hours perserver. For a server experiencing network latency, please add 2 to 4 hours to this time. For AIXservers, add at least 1 hour.Note:This estimate does not include getting the micro controllers back online with the server.B. Install the Picture Perfect nethostB.1 Database conversion process1. Log in to the current Picture Perfect 4.0 nethost server.2. Record the old server database sizes (person, badge, notes, all history, micro, category,department, and micro_relation tables).This information can be compiled from the following files:/cas/db/backup/table_desc.dat (for references to table name and id)/cas/db/backup/table_size.dat (for table record sizes based on table id)3. Check the database for illegal characters and fix any reported issues.Follow the instructions in Picture Perfect 4.0 Installation Manual, Chapter 3, “Verify theexisting database", section “Check for Illegal Characters in the Database”.4. Back up the database in the current production system before the upgrade of base, badgeand other packages where applicable (image, tours, graph) with contents verification.Preferably, back up in separate files for each item (for example, one file with base and badge,one file with images, etc.).Follow the instructions in Picture Perfect 4.0 Installation Manual, Chapter 3, “Back upDatabase, Configuration, and Custom Files”, section “Back up Database".5. Perform the Backup > History archive to Disk File task; DO NOT perform scenario with ForceRoll Over option, since the source Picture Perfect 4.0 server might still be running andinserting history records, which will be archived when the Picture Perfect 4.6 target server iscompletely installed and ready to run.Follow the instructions in Picture Perfect 4.0 Installation Manual, Chapter 3, “Back upDatabase, Configuration, and Custom Files”, section “Archive History and ForceRollover". Remember not to run the …forcing rollover… option yet.
Chapter 3Upgrading Picture Perfect version 4.0/4.5.1 to 4.6356. Back up the information needed by the OS, such as server IP addresses in files like /etc/hosts.7. Start the database conversion processa. Transfer database backup files, compiled in step 4. in this section to the spare server.b. Log into the spare server.c. Remove Picture Perfect 4.0 if it is already installed.Follow the instructions in Picture Perfect 4.0 Installation Manual, Appendix C,Removing Picture Perfect".d. Install Picture Perfect 4.0.Follow the instructions in Picture Perfect 4.0 Installation Manual, Chapter 6, “InstallingPicture Perfect”, section “Install Picture Perfect 4.0".Note 1: Set up database sizes according to old retrieved sizes as described in Prerequisites on page 26,item 3, Database table sizes, plus expected growth and new History sizes where applicable.Note 2: Restore the Picture Perfect 4.0 database backup from step 4 in this section.e. Perform the optional package installation (netlan, impexp, image), restore thedatabase(s) where applicable, and reboot the server when requested.Follow the instructions in Picture Perfect 4.0 Installation Manual, Chapter 6, “InstallingPicture Perfect”, section “Installing Optional Packages and Interfaces".f. Execute the database conversion and follow instructions to perform a backup for thetarget-converted database.Follow the instructions in Picture Perfect 4.6 Installation Manual, Chapter 3,“Upgrade”, section “Running the conversion utility".g. Transfer the converted database file to a safe place (PC or the target server), sincecurrent server could be used for other conversions.B.2 Picture Perfect 4.6 server installation1. Log in to the target server.2. Install the OS (AIX or Linux).Follow the instructions in Picture Perfect 4.6 Installation Manual, Chapter 4 or 5,depending on your server type (AIX or Linux).3. Prepare the server for Picture Perfect 4.6 (phase 2).Follow the instructions in Picture Perfect 4.6 Installation Manual, Chapter 6, “InstallingPicture Perfect 4.6”, section “Running the pre-installation setup".4. Find out if the customer requires installation of IT security/OS hardening tools and proceedaccordingly.
Page 1: Picture Perfect 4.6 Enterprise Edit
Page 5 and 6: iiiChapter 6. Troubleshooting and s
Page 7 and 8: iPrefaceThis document is designed t
Page 9 and 10: Chapter 1 Enterprise system overvie
Page 11 and 12: Chapter 1Enterprise system overview
Page 13 and 14: Chapter 2 Installing the Picture Pe
Page 15 and 16: Chapter 2Installing the Picture Per
Page 34 and 35: 26Picture Perfect 4.6 Enterprise Ed
Page 92 and 93:
84Picture Perfect 4.6 Enterprise Ed
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
100Picture Perfect 4.6 Enterprise E
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126:
show all

Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...

Create successful ePaper yourself

Delete template?

Save as template?