Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...

Chapter 2Installing the Picture Perfect Enterprise system19Configuring the system to recognize the subhostsAfter installing the Picture Perfect subhost package and rebooting the subhost, the Enterprisesystem must be configured to include this subhost. This is done from the nethost.Prerequisites• The netlan package must be installed on the nethost.See Installing the nethost on page 7.• The subhost package must be installed on the subhosts.See Installing subhosts on page 14.• Make sure that all subhost records have been created on the Hosts form. See Update thehost table on the nethost with subhost information on page 11.Using the hostconfig utility on the nethost to add the subhosts to the networkNote: Picture Perfect must NOT be running on the subhosts before running the hostconfig utility.To add the subhosts to the network:1. As user ppadmin, stop Picture Perfect on all subhosts being added to the network by typing:rc.pperf -kEnter2. If not already logged on, log on as ppadmin on the nethost and open a new terminalwindow.3. If this is a new installation, stop Picture Perfect by typing:rc.pperf -kEnterIf you already have your system configured and are running hostconfig again toreconfigure a subhost (for example, after a crash), you might not need to stop PicturePerfect. In this case, perform this step only if requested by hostconfig.4. Switch users to root by typing the following command.su -Enter your root password and then press Enter .5. At the command prompt, type:. /cas/bin/profilehostconfig EnterEnterThe nethost and all subhosts are updated. Messages similar to the following display:----------------------------------------------------------------------Picture Perfect hostconfig utility - Version 4.6 04/10/11Copyright (C) 1989-2011 UTC Fire & Security Americas Corporation, Inc.----------------------------------------------------------------------Starting the Informix database.. Done.Checking sqlhosts file... Processing [bctdover]