Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...

Chapter 2Installing the Picture Perfect Enterprise system74. Adding a new subhost or adding back a crashed or removed subhost after the networkis configureda. Update the host table on the nethost with subhost information.b. Install the subhost package on the new subhost.c. Shut down and reboot the new subhost.d. Stop Picture Perfect on the subhost and nethost.e. Use the hostconfig utility on the nethost to add the new subhost to the network.f. Restart Picture Perfect (if it is down) on the nethost and the new subhost.g. Run chkenterprise on the nethost.Enterprise system software installationInstalling the nethostPrerequisites• Before installing netlan, the Picture Perfect base package must be installed on the nethost.• Micro Table Settings: During the base installation, select the following settings at the prompts:The MICRO table can grow from 70 to 78 records.Is this acceptable (y/n)? [y]You need to change these settings. Type: nThe following message displays:Enter the initial number of records:Enter: 1The following message displays:Enter the maximum number of records:Enter: 1• Micro Relation Table Settings: During the base installation, select the following settings at theprompts:The MICRO RELATION table can grow from 6000 to 10000 records.Is this acceptable (y/n)? [y]You need to change these settings. Type: nThe following message displays:Enter the initial number of records:Enter: 100The following message displays:Enter the maximum number of records:Enter: 100