Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...
Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...
Picture Perfect 4.6 Enterprise Edition User Manual - UTCFS Global ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6<strong>Picture</strong> <strong>Perfect</strong> <strong>4.6</strong> <strong>Enterprise</strong> <strong>Edition</strong><strong>User</strong> <strong>Manual</strong>OverviewThe installation of a <strong>Picture</strong> <strong>Perfect</strong> <strong>Enterprise</strong> system is performed in two phases. First, a minimalset of packages is installed and configured to achieve a functional network environment based onthe planned configuration. Then, the optional add-on packages are installed on the subhosts and/orthe network host (i.e., nethost) as appropriate to provide the full capabilities of the system.Installation of optional add-on packages is covered in the respective manuals for those packages.This chapter covers the first phase of the installation and includes the following:• Installation overview• <strong>Enterprise</strong> system software installation• <strong>Enterprise</strong> system printer installationPrerequisitesVerify that the following prerequisites have been met. If necessary, refer to the <strong>Picture</strong> <strong>Perfect</strong> <strong>4.6</strong>Installation <strong>Manual</strong> for instructions.• The <strong>Picture</strong> <strong>Perfect</strong> base package is installed on the nethost and all subhosts.- Refer to Prerequisites on page 7 before installing the base package on the nethost.• Additional software required:- netlan for the <strong>Enterprise</strong> system nethost only- subhost for the subhosts onlyInstallation overviewThe <strong>Enterprise</strong> system installation involves the following steps:1. Installing the nethosta. Install the netlan package on the nethost.b. Shut down and reboot the nethost.c. Update the host table on the nethost with subhost information.2. Installing subhostsa. Install the subhost package on each subhost.b. Shut down and reboot all subhosts.3. Configuring the system to recognize the subhostsa. Stop <strong>Picture</strong> <strong>Perfect</strong> on the subhost(s) being added to the network.b. Use the hostconfig utility on the nethost to add the subhosts to the network.c. Restart <strong>Picture</strong> <strong>Perfect</strong> (if it is down) on the nethost and all newly configured subhosts.d. Run chkenterprise on the nethost. Check the integrity of the installation using theother tools described in the Installation and upgrades section of Chapter 7, FAQs.
Change language