Using a VNXe System with Microsoft Windows Hyper-V - EMC ...

More documents

Recommendations

Info

Setting Up a Host to Use VNXe Hyper-V Storage4. In the Add Target Portal dialog box:a. Enter the IP address of the VNXe iSCSI Server interface on the first subnet with thehost interface.You can find this address with Unisphere by selecting Settings > iSCSI ServerSettings.b. Click Advanced.The Advanced Settings dialog box opens.5. In the Advanced Settings dialog box, set the following:• Local adapter to Microsoft iSCSI Initiator.• Source IP to the IP address of the host interface on the first subnet with the VNXeiSCSI Server interface.6. If the host initiator is configured for optional initiator CHAP on the VNXe iSCSI Server:a. Select CHAP logon information.b. Leave User name as the default value, which is the initiator’s IQN.c. Set Target secret to the same secret that is configured for the host initiator on theVNXe iSCSI Server.The VNXe iSCSI Servers support CHAP secrets of 12 to 16 characters only.d. If the VNXe iSCSI Server is configured for mutual CHAP, select Perform MutualAuthentication.7. Click OK to close the Advanced Settings dialog box.8. In the Add Target Portal dialog box, enter the IP address of the VNXe iSCSI Serverinterface on the first subnet with the host interface.You can find this address with Unisphere by selecting Settings > iSCSI Server Settings.9. Click OK to close the Add Target Portal dialog box.The IP address of the first VNXe iSCSI Server should appear on the Discovery tab underTarget Portals.10. In the Discovery tab, under Target Portals, click Add again to add the second VNXeiSCSI Server interface.11. In the Add Target Portal dialog box:a. Enter the IP address of the VNXe iSCSI Server interface on the second subnet withthe host interface.You can find this address with Unisphere by selecting Settings > iSCSI ServerSettings.b. Click Advanced.12. In the Advanced Settings dialog box, set the following:• Local adapter to Microsoft iSCSI Initiator.• Source IP to the IP address of the host interface on the second subnet with theVNXe iSCSI Server interface.26 Using a VNXe System with Microsoft Windows Hyper-V
Setting Up a Host to Use VNXe Hyper-V Storage13. If the host initiator is configured for optional initiator CHAP on the VNXe iSCSI Server:a. Select CHAP logon information.b. Leave User name as the default value, which is the initiator’s IQN.c. Set Target secret to the same secret that is configured for the host initiator on theVNXe iSCSI Server.The VNXe iSCSI Servers support CHAP secrets of 12 to 16 characters only.d. If the VNXe iSCSI Server is configured for mutual CHAP, select Perform MutualAuthentication.14. Click OK to close the Advanced Settings dialog box.15. In the Add Target Portal dialog box, enter the IP address of the VNXe iSCSI Serverinterface on the second subnet with the host interface.You can find this address with Unisphere by selecting Settings > iSCSI Server Settings.16. Click OK to close the Add Target Portal dialog box.17. In the Discovery tab, verify that the addresses of both VNXe iSCSI Server targetsappear in the Target Portals list.18. Click the Targets tab.19. In the Targets tab, select the VNXe iSCSI Server target name and click Log On.The Log On to Targets dialog box opens.20. In the Log On to Targets dialog box, click Advanced.21. In the Advanced Settings dialog box, set the following:• Local adapter to Microsoft iSCSI Initiator.• Source IP to the address of the host interface on the first subnet with the VNXeiSCSI Server interface.• Target Portal to the address of the VNXe iSCSI Server interface on the first subnetwith the host interface.You can find this address with Unisphere by selecting Settings > iSCSI ServerSettings.22. Click OK to close the Advanced Settings dialog box.23. In the Log On to Target dialog box:a. Select Automatically restore this connection when the system boots.b. Select Enable multi-path.24. Click OK to close the Log On to Target dialog box.25. In the Targets tab, select the VNXe iSCSI target and click Log On again to log on to thesecond VNXe iSCSI Server interface.26. In the Log On to Targets dialog box, click Advanced.27. In the Advanced Settings dialog box, set the following:• Local adapter to Microsoft iSCSI Initiator.Configuring the host to connect to a VNXe iSCSI Server 27
Page 1: EMC ® VNXe SeriesUsing a VNXe Sys
Page 4 and 5: Contents4 Using a VNXe System with
Page 7 and 8: PrefaceCourierUsed for:• System o
Page 9 and 10: CHAPTER 1Setting Up a Host to Use V
Page 11 and 12: Setting Up a Host to Use VNXe Hyper
Page 13: Setting Up a Host to Use VNXe Hyper
Page 25: Setting Up a Host to Use VNXe Hyper
Page 43 and 44: CHAPTER 2Migrating Hyper-V Virtual
Page 45 and 46: Migrating Hyper-V Virtual Machines
Page 47 and 48: APPENDIX ASetting Up MPIO for a Win
Page 49 and 50: Setting Up MPIO for a Windows Hyper
Page 51 and 52: Setting Up MPIO for a Windows Hyper

Using a VNXe System with Microsoft Windows Hyper-V - EMC ...

Create successful ePaper yourself

Delete template?

Save as template?