English Ethernet Solutions - from Optical to Last Mile Catalog 2006

EnglishEthernet Solutions - from Optical to Last MileCatalog2006OPTICAL NETWORKINGETHERNET & MULTI-SERVICEOVER PDH/SDH/SONETLAST MILE | TDM ACCESS

86 countries, 800+ customers, 100,000+units of communications products deployedin today‘s worldwide networks.Our History1988: Pandatel formed as Pan DacomTelekommunikation GmbH1999: Pandatel went public listing atFrankfurt Prime standard Stock Exchange2004: Pandatel aquired Lightmaze Solutions,a specialist in optical metro WDMtransport systems2005: Dowslake Venture Ltd., a majorshareholder of Dowslake Microsystems,acquired 49.98% stake in Pandatel AG2006: Pandatel will merge (upon shareholderapproval on March 27 th 2006),with Dowslake Microsystems, headquarteredin Santa Clara, California,with a fully owned operations center inShanghai, ChinaUp to 2006: Pandatel deployed morethan 100,000 units of communicationsproducts for more than 800 satisfiedcustomers in over 86 countries.Our TechnologiesOver the years, Pandatel accumulatedremarkable technology and know-howin the following areas:Optical Wavelength Division Multiplexing– technology to combine, transport anddeliver huge amount of informationthrough a single strand of optical fiber.Optical Amplification Technology– technology to allow continuous transmissionof optical channels withoutelectrical-optical-electrical conversion.Optical amplification technology is theenabler of today’s worldwide fiber opticalnetworks.Enterprise Networking Technology– technology to provide specific solutionsto networks of large corporatecustomers, for example, storage areanetworking (SAN) for banks and datacenters.Ethernet Technology– technology to allow providing informationservices (data or voice)with high quality. Our latest Ethernettechnology makes voice over Internetnetworks simple and low cost.Information Delivery Access Technology– technology to make it possible for theinformation flowing through multiplelayers and types of networks, and toensure the quality of delivery.Our FocusLeveraging on our technology andknow-how, working with hundredsof customers worldwide, we focus onproviding cost-effective network solutionsto network operators and serviceproviders in following areas: metro,enterprise, security, military and home.Our CommitmentWe commit to make continuous improvementon our products, operationsprocess and our support networks. Wecommit to work on issues and problemsto reach our goal - to meet and exceedcustomers’ expectations.Ethernet Solutions - from Optical to Last Mile

Ethernet Solutions - from Optical to Last MilePandatel offers products and systemsfor the implementation of different solutionsand provides extensive support inthe course of planning and implementingthe methods or installations. Pandateldelivers a wide spectrum of opticalsystems, multiplexers, converters andmodems.Our products are divided into thefollowing main categories:| OPTICAL NETWORKING| ETHERNET & MULTI-SERVICE OVERPDH/SDH/SONET| LAST MILE | TDM ACCESSThe use of Pandatel’s products improvesthe performance parameters of existingcommunication networks.These productsare appropriate for the fullest rangeof applications,for example in SAN systems(Storage Area Networks), MetroAccess, data transmission/ conversion,transportation and traffic management,logistics, particular branches of industry,broadcasting or military applications.Our customers receive the entire rangeof support and assistance for ourproducts, sales and services from asingle source. The services provided byour Sales Representatives and SystemDevelopers are aimed at presentingour clients with secure, widely scalablenetwork architectures together withmaintenance and technical support. Ourclients are encouraged to use this rangeof services offered by their local representative.The Quality Management System thatwe apply to our production and businessprocedures has been appropriatelycertified according to DIN ISO 9001-2001. The qualities and specificationsof our products are compliant with validinternational standards and regulations,such as CE or national certificationrequirements applicable in the telecommunicationindustry, i.e. BAKOM andZNIIS. Also, our products obtain relevantsecurity approvals, like VDE, UL orcULus, where testing and verificationprocedures are carried out on the basisof very strict criteria.Pandatel ’s products are alwaysapplicable when:| new ranges of capacity are to beimplemented, or the efficiency of theexisting resources needs improving,| the costs of operating the currentnetwork require optimisation,| expandability, flexibility, adaptability,high performance and reliability aregreatly required.Pandatel only delivers top qualityproducts and services whose level ofreliability and security is sufficient evenfor the most demanding customers. Thelevel of our clients’ satisfaction with theuse of our products is very high, andmaintaining this level of our clients’ trustis our key objective.This catalog is meant as an importantinstrument in order to get introducedto the different abilities of Pandatel AG,enabling you to select your solutions inan easy way.Pandatel is one of the few worldwidesuppliers that offer an enormous diversityof products and systems for datatransmission via optical fiber and copperlines. Moreover, our products supportthe possibility of combining both thesetechnologies in single applications.C-MUX-155 with ADM connection for Ethernetand GSM Leased Lines over SDH/SONET network

CONTENT6 Optical Networking28 Last Mile | TDM Access7 YUMIX 4000E | 16-channel Enterprise Optical xWDMSystem7 YUMIX 400 | 8-channel Optical xWDM System12 YUMIX 100 | 1U Low Cost Optical xWDM System13 YUMIX MS1025 | SmartGAIN Optical Fiber Amplifier14 YUMIX FX-X | Multi-data Rate Fiber Optic Repeater15 YUMIX OS-I | Intelligent Fiber Optic Switch16 Ethernet & Multi-service overPDH/SDH/SONET17 C-MUX-2550 | 2.5G Multi-service PDH, Ethernetand SDH/SONET ProvisioningPlatform18 C-MUX-2510 | GE to STM-16/OC-48 Fiber OpticMultiplexer19 C-MUX-155 | 155M Multi-service PDH, Ethernetand SDH/SONET ProvisioningPlatform20 S-MUX-155 | Fast Ethernet and E1 to STM-1/OC-3Fiber Optic Multiplexer21 EC-155 | Fast Ethernet over STM-1/OC-322 GM-E | Fast Ethernet over PDH E323 INV-MUX-E | 8-channel Inverse Multiplexer24 INV-MUX-S | 4-channel Inverse Multiplexer25 INAX | 4-channel to E1 Multiplexer26 INAX-CV | 2-channel to E1 Fractional Multiplexer27 GM-F | Fractional 4-wire Copper Converter29 ET-CB | Multi-port Copper/Fiber Gigabit EthernetSwitch and Converter30 ET-CA | Copper/Fiber Fast Ethernet Switchand Converter31 COP-FE | Next Generation E1 Multiplexer overFast Ethernet32 COP-RS | TDM Copper or Fiber Multiplexerover Fast Ethernet33 COP-FO | TDM Fiber Multiplexer34 EMUX-M21 | E1/T1 to E3/T3 Access Multiplexer35 FME-M | Modular 6-channel G.703 Fiber OpticMultiplexer36 CM-G | Modular 2/4-wire G.SHDSL Modem37 OM-F | Modular Optical Modem for FractionalE138 CC-F | Fractional G.703 Converter39 IM-C/S | Interface Modules for MACS400040 FH/FL-P | Optical E1 Modem41 FL-F | Low Cost Fractional Optical E1Modem42 FL-E | Fiber Optic E3/T3 Modem43 FL-S | SDH/SONET Media Converter orModem44 DV-C | Digital Fiber Optic Video and DataConverter45 Chassis & Housings46 RA-T | Modular Single & Multi Slot Housings47 RA-U/RA-HD | Manageable 3U and 6U 19“ Chassis

Application SymbolsFiber Optic Multiplexers (optical/optical)Fiber Optic ModemsFiber Optic Multipexers (electrical/optical)Copper/Optical FiberAccess Multiplexers (electrical/optical)Back-upFiber Optic Multiplexers AsynchronousFiber Optic Multidrop SystemFiber Optic ConvertersSwitchMedia ConvertersNetworkInterface ConvertersBuildingFiber Optic Converters/TransceiversServer/HostDWDM/CWDM Multiplexer SystemWorkstationBaseband ModemsData Storage

Optical NetworkingYUMIX is well suited for satisfying thebackbone capacity for a telecommunicationsnetwork, creating or expanding astorage area network (SAN) or connectingit to existing networks, enhancingthe speed and capacity of data transmissionlines between company offices,as well as creating virtual privatenetworks (VPN).The YUMIX hardware platform integratesWDM (Wavelength DivisionMultiplexing), TDM (Time Division Multiplexing)and cross-connect, combinedwith intelligent network managementThe core of the hardware consists of across-connect, which is integrated witha WDM system in one housing.Since theoptical WDM interfaces transmit data atany rate between 8 Mbps and 2.7 Gbps,and also 10 Gbps, the network providergains complete freedom with respectto the applications to be transmitted:hardware which is used for fast Ethernettoday, for example, may be usedtomorrow for fibre channel. Throughthe integration of a cross-connect,individual applications can be reroutedto at least 20 random neighbouringnodes, as required – this allows multipleredundancies with any kind of networktopology and with optimum resourcemanagement. In this way, extremelyhigh flexibility is achieved in the physicallayer. Besides this redundancy, which isinherent in meshed networks, all levelsof hardware redundancy are also available:card, chassis, rack, channel andline protection.The cross-connect is implemented at areasonable price in the YUMIX range ofproducts, which was specially designedfor the operation of meshed networks.Devices designed specially for meshednetworks increase the flexibility ofexisting network structures and reducethe original costs for system hardware.Compared to the mirroring of networkson a ring-type structure, which is verycommon on the market, equipment formeshed networks allows savings of upto 70 percent in assemblies.YUMIX provides a powerful platform forsetting up intelligent optical networksand the demand-oriented expansionof existing capacities in the transportsector.The individual members of the YUMIXfamily are characterised not only by theintegration of the essential componentsof modern networks such as TDM (TimeDivision Multiplexing) and WDM (WavelengthDivision Multiplexing), but alsoby sophisticated network managementand element management systems thatenable full use of the technical potentialof the DWDM and CWDM technologies.The numerous functions of the sophisticatednetwork management ofYUMIX systems optimise the runningoperations of optical networks. Automaticservice calls guarantee immediatenotification to the network provider andthus ensure minimum downtimes in theevent of a fault.

Optical NetworkingSystem OverviewThe YUMIX family combines the benefits of DWDM, CWDM, TDM andCross Connect into a single platform. The YUMIX product familyconsists of:| YUMIX 4000E, a 16-channel Enterprise Optical xWDM System| YUMIX 400, a 4-channel Optical xWDM System| YUMIX 100, a 1U low cost Optical xWDM System| Client interfaces @1310nm, 850nm, SFP interfaces optional| Line interfaces from 8 Mbps -2.7 Gbps| 8 x Any TDM module combining any mix of up to 4 client signals(30 Mbps - 270 Mbps)| Optical amplification| 10 Gbps transponders| Optional 32 x 32 cross connect| Optical Switch| Network Management for any architecture (point-to-point, star,ring, mesh)ContentYUMIX 4000E | 16-channel Enterprise Optical xWDM SystemYUMIX 400 | 8-channel Optical xWDM SystemYUMIX 100 | 1U low cost Optical xWDM SystemYUMIX MS1025 | SmartGAIN Optical Fiber AmplifierYUMIX FX-X | Multi-data Rate Fiber Optic RepeaterYUMIX OS-I | Intelligent Fiber Optic SwitchYUMIX 4000E | 16-channel EnterpriseOptical xWDM SystemYUMIX 400 | 8-channel Optical xWDMSystemThe YUMIX 4000E is a 16-channel Enterprise Optical xWDMsystem designed for the enterprise and access market: andwith this platform you can ”pay-as-you-grow”. The YUMIX4000E offers protocol transparent transmission, any topologyand future proof hardware all in one box.The YUMIX 400 is a compact 2.5U height 4-channel OpticalxWDM System. As part of the YUMIX optical product family,the YUMIX 400 uses the same client and line interfaces andcomponents of the YUMIX 4000E.YUMIX 4000E | Main chassis| 14 slots for different types of modules| Redundant AC or DC Power Supply| Space saving back-to-back installationThe YUMIX 4000E chassis is a carrier for all E modules and can bemounted in either NEBS or ETSI compliant racks with correspondingadaptors. It holds up to 8 line-cards with client and line interfaces,two filter cards, one cross-connect card, and one management card.All modules are hot pluggable and accessible from the front. The fiberoptic cabling and power cords are also attached at the front of thesystem. Space saving back to back installation of the Main chassis ispossible due to its depth of only 27cm.YUMIX 400 | Main chassis| Compact 2.5U height design| 8 slots for different types of modules| Redundant AC or DC power supplyThe YUMIX 400 is a compact 2.5U height optical networking systemthat combines the intelligence and flexibility of YUMIX 4000E witha low-cost approach. YUMIX 400 is ideally suited for point-to-pointapplications and for ring applications. YUMIX 400 can support up to8 channels and allows any protocol between 8 Mbps to 2.7 Gbps and10 GbE transponders.

Optical NetworkingYUMIX PSAC | AC Power SupplyAC power supply for YUMIX 4000E chassis provides overvoltage,overcurrent and overheating protection. Can be used alone or inredundant mode.| Input voltage (wide range) 100 - 240V| Input frequency: 50 – 60Hz| Redundant mode possible| Hot-pluggableYUMIX PSDC | DC Power SupplyDC power supply for YUMIX 4000E chassis provides overvoltage,overcurrent and overheating protection. Can be used alone or inredundant mode.| Input voltage 36 - 72V| Redundant mode possible| Hot-pluggableYUMIX EMCC & EACC | Management ModulesPandatel’s management card is designed for mounting into YUMIX4000E chassis. Management cards may be combined for implementingcascade connections. They are used for element and networkmanagement and allow the user to configure and access varioussettings for all modules present in a chassis. Furthermore a managementcard also runs Pandatel’s powerful network management software.It manages various hardware and network faults by continuouslycommunicating with all modules in a chassis over a dedicatedinternal bus and with other nodes in the network over the supervisorychannel. Network management is done electrically through Fast Ethernetports or optically through either one or two optical supervisoryports or via cross-connect and Line Card.Interfaces:| Fast Ethernet (Two independent auto-sensing RJ-45 ports, supportingIEEE802.3 10BaseT and IEEE802.3u 100BaseTx)| Modem (V.92/56K)| USB 1.1| Serial (Mini-USB socket)Option 1:| One or two optical supervisory interfacesOption 2:| Two more RJ-45 ports (cannot be combined with option 1)

Optical NetworkingYUMIX LCD | Line Card, DiscreteLC modules receive/send an electrical signal from/to the backplaneand receive/send optical signals from/to the ports on the front panel.There are line interface units (CWDM) and client interface units(850/1310nm). The 4 units of a card can be either only of line or clienttype or a mix of 2 of each.Line interface units:| Data rates: 8 Mbps - 2.7 Gbps| 3R data regenerationClient interface units:| Data rates: 8 Mbps - 1.25 Gbps (850 nm), 8 - 200 Mbps (lowspeed, 1310 nm), 200 Mbps - 2.7Gbps (high speed, 1310 nm)| 2R (low speed) and 3R (high speed) regenerationYUMIX LCT | Line Card, TransceiverTransceiver type Line Modules provides 4 SFP interfaces which can beconfigured as 4 Client Interfaces, 4 Line Interfaces or a mixture of 2Client and 2 Line Interfaces.| Transparent from 8 Mbps up to 2.7 Gbps| 2R and 3R data regeneration| SM/MM inputs and CWDM/DWDM wavelengths depending on SFPmodulesYUMIX LDT | Line Card, HybridHybrid Client/Line Modules provide 2 Line Interfaces CWDM discreteand 2 Client Interfaces for SFP transceiver use.| Transparent from 8 Mbps up to 2.7 Gbps| 3R regeneration| Reach:60 km (8 channels)45 km (16 channels)80 km, extended version (8 channels)| Power MonitoringYUMIX TDM2/2.5G | 2 x Gb Multiplexer CardTDM2/2.5G modules combine two incoming client signals (FC/FC,FC/GbE, GbE/GbE) into one line channel by means of time divisionmultiplexing. This channel can either be forwarded to the backplaneor sent optically to the WDM filter card.Client Interfaces:| SFP Transceivers| Operating data rate: Fiber Channel/Gigabit Ethernet(1062.5/1250 Mbps)Line Interface:| Discrete| Wavelength: 1310 - 1610 nm (acc. to ITU-T 694.2)| Operating data rate: 2488 Mbps (Oc-48 framing)

Optical NetworkingYUMIX TDM8/2.5G | 8 x Gb Multiplexer CardThe optical line card TDM8/2.5G is built on a flexible modular basissupporting SFP modules for various transmission rates in the range of30 to 270 Mbps. Thus multiple protocols are supported using the oneand the same line card. This card uses TDM technology (TDM – TimeDivision Multiplexing, also called time multiplex) to combine up to 8independent client data streams and the related protocols, timedelayed,into one single channel with a greater bandwidth (OC-48framing, 2488 Mbps).Supported protocols:| Fast Ethernet, FDDI, STM-1/OC-3, ESCON, FC-1/4, Digital VideoSDIYUMIX XC | Cross Connect (for YUMIX 4000E only)The XC (Cross Connect) allows for fast swithcing of data rates upto 2.7 Gbps between all interface units or between interface unitsor between interface units and the management module in a mainchassis. The switching time is typically 15 ms.| 32 x 32 cross connect for fast switching| Data rates up to 2.7Gbps between all interface modules| Each module and each port can be connected to any other moduleor port (matrix)| Switching time: 15 ms (typical)YUMIX DX/MX | Multiplexer/De-multiplexerThe WDM modules are passive optical devices. They multiplex andde-multiplex the optical signals (wavelengths acc. to ITU-T G.694) ofthe line interfaces in full duplex. The multiplexing component of thesemodules merges the channels onto a single fiber. The de-multiplexingcomponent receives this signal on the other end of the line andseparates the signals back into single ITU-T channels. Different typesof filter modules are available.CWDM:| Granularity down to 4 channels| Up to 16 channels| In-service upgrade from 8 to 16 channelsDWDM:| Granularity down to 8 channels| Up to 64 channels (< 2.7Gbps)| Up to 32 channels @ 10Gbps| Extra optical supervisory channel10

Optical NetworkingProductTopologiesTransmission distanceYUMIX 4000EMesh, Ring, Point-to-point, etc.Tributary interface: 200 m up to 2 kmLine interfacestandard:extended:max. 60 kmmax. 80 kmApplicationsRedundancyRegenerationModulesLocal Portsall protocols from 8 Mbps - 2.7 Gbps:OC-3/... -48, STM-1/...-16, ATM, Fast Ethernet, Gigabit Ethernet, 2 x GE, Fibre Channel, 2 x FC, ESCON, Ficon, Sysplex Timer,FDDI, Coupling Link, Digital VideoUser customized2R, 3RLine and tributary Interface cards, Cross-Connect & Fiber Switch cards,WDM modules, optical Supervisory channel32 PortsOptical fiber: 850 nm to 1630 nmMultimode/singlemode or electricalSwitchingPower Input (shelf)Power ConsumptionSingle Channels:Fiber:100-240V AC Wide Range (DC on request)max. 400WCross ConnectFiber SwitchStorage -10°C to + 60°COperation+5°C to +40°CEMC EN 55022,EN 55024Shelf Module 310 x 482 x 270 (H x W x D)Installation requirements19” or ETSI-/NEBS-rack adaptorProduct YUMIX 400TopologiesTransmission distancePoint-to-pointTributary interface: 200 m up to 2 kmLine interfacestandard:extended:max. 60 kmmax. 80 kmApplicationsRedundancyRegenerationModulesLocal Portsall protocols from 8 Mbps - 2.7 Gbps:OC-3/... -48, STM-1/...-16, ATM, Fast Ethernet, Gigabit Ethernet, 2 x GE, Fibre Channel, 2 x FC, ESCON, Ficon, Sysplex Timer,FDDI, Coupling Link, Digital VideoUser customized2R, 3RLine and tributary Interface cards, Fiber Switch cards, WDM modules, optical Supervisory channel8 PortsOptical fiber: 850nm to 1630nmMultimode/singlemode or electricalSwitching Fiber: Fiber SwitchPower Input (shelf)100-240 VAC Wide Range (DC on request)Storage -10°C to + 60°COperation+5°C to +40°CEMC EN 55022, EN 55024Installation requirements19” or ETSI-/NEBS-rack adaptor11

Optical NetworkingYUMIX 100 | 1U low cost Optical xWDM SystemOptical multiplexer for up to 8 channels with data rates from 100 Mbps to 2.5 Gbps per channelProduct Specifications| Data rate of 100 Mbps to 2.5 Gbps per channel| Hot-pluggable SFP interface:- 850 nm, 1310 nm, 1550 nm Multimode/Singlemode| Supports Fast Ethernet, Gigabit and SDH/SONET| 3R or optional 2R| CLI, SNMP and TL1 management interface| Redundant power supply| Up to 80 km transmission distance| 4- or 8-channel CWDM/DWDM system with data rates ranging from100 Mbps to 2.5 Gbps| Modular assembly with hot-pluggable SFP| Two 4-channel units can be stacked via cascade port to create an8-channel CWDM/DWDM system| For Point-to-point or ring connection and Add/Drop application| Cost effective solution for 4 or 8 channels| Compact 19” 1U design with redundant power supplyData rate3R configurable clock rateTransparent 2RClient InterfaceWavelengthMinimum Output PowerReceiver SensitivityTransmission distanceLine InterfaceCWDMDWDM100 Mbps...2.5 GbpsSDH (STM-1/4/16), SONET (OC-3/12/48),Fast Ethernet, Gigabit EthernetSupported850, 1310 or 1550 nm-10 dBm-22 dBm500m for Multimode SFPShort or Long reach for Singlemode SFPCenter Wavelength 1471; 1491; 1511; 1531;1551; 1571; 1591; 1611ITU-T Grid C or L bandOutput PowerReceiver SensitivityTransmission Distance> 0 dBm- 27 dBm20 km, 40 km, 60 km or 80 kmFeaturesManagementHumidityOperating TemperatureStorage TemperaturePower SupplyPower ConsumptionGUI, CLI, Telnet, SNMP, TL10 to 85% non-condensing-5 °C to 55 °C-40 °C to 70 °C110/220 VAC or 48 VDC< 25 WMechanicsRack Mount UnitDimensions (H x W x D)Mounting Options19” 1U45 x 440 x 230 mm19” or 23” front or center mountCertificationsOrder MatrixSafetyEMIReliabilityUL 60950 (US), EN 60950 (EU), IEC 60950FCC Part 15 (CFR47) Class A Digital Devices (US)EN 55022 Class A (EU)GR-63-CORE, GR1089-COREYUMIX 1001U low cost Optical xWDM SystemOptical multiplexer for up to 8 channels with data rates from 100 Mbps to 2.5 Gbps per channelProduct Type Wavelength Dat Rate Line Distance Power Supply Art.No. Short NameCWDMDWDMNo of LambdasUni-directionalBi-directionalSTM-16/OC-48Gigabit Ethernet40 km (

Optical NetworkingYUMIX MS1025 | SmartGAIN Optical Fiber AmplifierOptical amplifier for C-Band & L-Band wavelengths to achieve greater transmission distancesProduct Specifications| Optical Amplifier based on patented SmartGAIN technology| Configurable as C or L band EDFA, with fixed or variable gain| Built-in standard based network management| Supervisory Channel Add/Drop| Input and Output Monitoring Tap| CLI, SNMP and TL1 user interface| Low cost and ultra-compact 1U rack mount unit| Plug-n-play solution| Optical amplifier for in-line or terminal high power amplification| Broadband WDM amplification for C or L band| DCM compensation through mid-stage access| Optical Add/Drop node pre- and post-amplifier| High power requirement up to 23 dBm for CATV| Plug and play solutionTypeData AmplificationParameterInput Signal WavelengthMaximum Output PowerInput Power RangeVariable Gain RangeFlat Gain RangeGain FlatnessSignal-spontaneous Noise FigureOptical Return LossPolarization Mode DispersionPolarization Dependent GainSignal Input & Output Detection Dynamic RangeSignal Detection Accuracy (within range)Transient Overshoot (10 dB Drop)Transient Setting TimeProtocol TransparentC-Band: 1528 … 1563 nmL-Band: 1570 … 1605 nmmin. 20 dBm-29 … 7 dBm (min … max)13 … 33 dB (min … max)10 … 15 dB (min … max)±0.5 … ±1.0dB (typ … max)5.6 … 6.0 dB (typ … max)min. 30 dB0.3 … 0.5 ps (typ … max)±0.2 … ±0.5 dB (typ … max)25 … 30 dB (typ … max)±0.3 … ±0.1 (min … typ)0.5 … 1.0 dB (typ … max)max. 1.0 msFeaturesManagementOperating TemperaturePower SupplyPower ConsumptionCertificationsMechanicsRack Mount UnitDimensions (H x W x D)CLI, SNMP, TL1 user interface-5 … 55 O C100 … 240 VAC, 33 … 74 VDC25 … 35 W (typ … max)CE, UL19” 1U44 x 437 x 230 mmOrder MatrixYUMIX MS1025SmartGAIN Optical Fiber AmplifierOptical amplifier for C-Band & L-Band wavelengths to achieve greater transmission distancesOperation Mode Management Power Supply Art.No. Short NameVariable Gain AmplifierFixed Gain AmplifierMid-stage Access OptionPower BudgetSNMP/TL1/CLI Management Access100...240 VAC, 33...74 VDCx 13 dBm x x MS1025-132300x 17 dBm x x MS1025-172500x x 20 dBm x x MS1025-202910x 8 dBm x x MS1025-13-S-XX13

Optical NetworkingYUMIX FX-X | Multi-data Rate Fiber Optic RepeaterConversion, amplification and regeneration of optical signals for data rates up to 2.5 GbpsProduct Specifications| Conversion, amplification and regeneration of fiber optic signals| Data rates up to 2.5 Gbps| Reclocking function for SDH/SONET, Gigabit Ethernet and FiberChannel (1 Gbps & 2 Gbps)| Dispertion Tolerance for Transmission up to 400 km| CLI, SNMP and TL1 management interface| Redundant power supply| Up to 600 km transmission distance| Multi-rate transponder as a booster/repeater to extend transmissiondistance of fiber optic signal| Optional 1+1 protection and 4 x 100 GHz tunability| Compact Type I plug-in card that can be housed in a 4-slot 19” 1Uchassis| Up to four repeaters within the same chassis| Comprehensive set of performance monitoring and diagnosisfeatures, including both client- and line- side power monitoring andloop-back testingData RateSoftware configurable clockrateTransparent 2RClient InterfaceWavelengthMinimum Output PowerReceiver SensitivityTransmission distanceLine InterfaceWavelengthOutput PowerReceiver SensitivityTransmission DistanceFeatures1+1 Protection4 x 100 GHz tunabilityManagementHumidityOperating TemperatureStorage TemperaturePower SupplyPower ConsumptionMechanicsRack Mount CardChassis DimensionsMounting OptionsCertificationsSafetyEMIReliabilitySDH (STM-1/4/16), SONET (OC-3/12/48),FE, GbE, Fibre Channel (1 Gbps & 2 Gbps)Supported850 and 1310 nm-10 dBm-22 dBm500 m for Multimode2 km for SinglemodeITU-T Grid0 dBm-27 dBmup to 600 kmOptionalOptionalCLI, Telnet, SNMP, TL10 to 85% non-condensing-5 °C to 50 °C-40 °C to 70 °C110/220 VAC or 48 VDCMax. 60 WCompact Type I plug-in card(housed in a 4-slot 19” 1U chassis)44.5 x 442.7 x 297.4 mm (H x W x D)19” or 23” front or center mountUL 60950 (US), EN 60950 (EU), IEC 60950FCC Part 15 (CFR47) Class A Digital Devices (US)EN 55022 Class A (EU)GR-63-CORE, GR1089-CORE14

Optical NetworkingYUMIX OS-I | Intelligent Fiber Optic SwitchUsing Optical Switch as a protective measure for fiber optic connectionProduct Specifications| Channel, Path and Line protection| Monitoring optical connections in active and passive network components| Switching time < 25 ms| Fiber Optic line protection| Protocol and data rate transparent (2 Mbps – 10 Gbps)| 3U or 5U rack mount card or standalone unit| Optimal surveillance of fiber optic connections| Latched switch for highest working fiber security even in case ofpower failures| Protocol and data rate transparent| Protects fiber optic networks from failures of passive or active networkelements| Switching time of less than 25 msTypeData TransmissionSwitching timeFiber Optic PortsFiber Optic SpecificationsProtocolData rateInterface portLine portConnectorTransparent2 Mbps to 10 Gbps< 25 ms1 x2 xSCMultimodeSinglemode850 or 1300 nm1310 nm and 1460 -1620 nm (dual band)62.5/125 µm9/125 µmMaximum Insertion LossLine SurveillancePassive back-upActive back-upI/F to Line 4.0 dB (coupler)Line to I/F 2.5 dB (switch)Total I/F to I/F 6.5 dBI/F to Line 1.5dB (switch)Line to I/F 2.5 dB (switch)Total I/F to I/F 4.0 dBOperating RangeWorking pathOperating temperatureLine signal detectLine failure detect0 … -30 dBm< -35 dBmFeaturesManagementControl portV.24 interfaceVT100 Access, SNMPASync. (9600), DCE, 8, N, 1)Environmental ConditionsTemperature (operating)Temperature (storage)Humidity+5 … +40 o C-30 … +80 o C10 … 90%, non-condensingMechanicsRack Mount Card(H x W x D)3U5U30 x 130 x 190 mm30 x 265 x 190 mm15

ETHERNET & MULTI-SERVICE OVER PDH/SDH/SONETGreater efficiency with multiplexing. General rules applicableto most traffic streams are usually true for data transmissionsas well: Currently operating network components andstructures should be utilized fully and efficiently to providefurther cost reductions. The multiplexing process is an excellentsolution for the optimisation of the capacity parametersof fiber optic and copper networks and hence significant costreductions.The key parameter criterion for the determination and evaluationof fiber optic applications is great line and transmissioncapacity. In point-to-point connections set up with integratedfiber optic modems, only one signal is transmitted across asingle fiber. However, the application of multiplexers – solutionsused for aggregating (pooling) several signals and theirsubsequent joint transmission across transparent media– should result in the reduction of costs related to fiber opticcables and in improved efficiency parameters of previouslyset-up networks.In the course of multiplexing, the data received are convertedinto higher bit rate streams, and subsequently transmittedvia copper or fiber optic cables. This organization schemeensures that data receive from different sources (central computerunits, carrier backbone systems) and data transmittedvia various protocols (ESCON, SDH, SONET, ATM, IP) may betransmitted simultaneously via a single connecting cable. Ininput/output devices, optical signals will be reconverted, i.e.the original data formats will be retrieved. Then, such signalswill be transmittable via copper or optical fiber lines. Theimplementation of such solutions should bring about a significantreduction of general network operation and maintenancecosts. Today the connection of different network types likeSDH or IP becomes more and more importantContentC-MUX-2550 | 2.5G Multi-service PDH, Ethernet and SDH/SONET Provisioning PlatformC-MUX-2510 | GE to STM-16/OC-48 Fiber Optic MultiplexerC-MUX-155 | 155M Multi-service PDH, Ethernet and SDH/SONET Provisioning PlatformS-MUX-155 | Fast Ethernet and E1 to STM-1/OC-3 Fiber OpticMultiplexerEC-155 | Fast Ethernet over STM-1/OC-3GM-E | Fast Ethernet over PDH E3INV-MUX-E | 8-channel Inverse MultiplexerINV-MUX-S | 4-channel Inverse MultiplexerINAX | 4-channel to E1 MultiplexerINAX-CV | 2-channel to E1 Fractional MultiplexerGM-F | Ethernet or Fractional 4-wire Copper to E1 Multiplexer16

Ethernet & Multi-Service over PDH/SDH/SONETC-MUX-2550 | 2.5G Multi-service PDH, Ethernet and SDH/SONET Provisioning PlatformMulti-service provisioning access for voice and data transmission over STM-16/OC-48 lineProduct Specifications| Up to 8 x FE, 2 x GbE, 8 x E1/T1, 3 x E3/DS3 and 1 x STM-1/OC-3user interfaces over protected STM-16/OC-48 line| 1+1 MSP| L2 switching on all LAN ports| Time slot assignment capability| Dynamic bandwidth allocation with LACS| Support GFP, X.86 LPAS or RFC1662 PPP| Virtual Concatenation on all data interfaces| Multi-service provisioning platform for up to 2.5 Gbps, that deliversvarious services including protected optical transport and access optionssuch as FE, GbE, E1/DS1, E3/DS3 and SDH/SONET services| Enables multi-connectivity including: Terminal Multiplexer, SDH/SONET Add/Drop Multiplexer for ring, mesh, or chain applications| Comprehensive configuration, fault, performance, maintenance andsecurity management tools| Compact 19” IU rack mount unitEthernet Interface PortBit rateConnectorComplianceLAN tableE1/DS1 Interface PortBit rateConnectorLine CodingE3/DS3 Interface PortBit rateConnectorLine CodingSDH/SONET Interface PortBit rateConnectorLine PortBit rateConnectorFeaturesCross Connect (non-blocking)ManagementPerformance MonitoringMaintenanceLoop-backAlarm LogHumidityOperating TemperaturePower SupplyPower ConsumptionMechanicsRack Mount UnitDimensions (H X W x D)8 x 10/100BaseT and 2 x 1000BaseSX/LXRJ45 (FE) | LC (GbE)IEEE 802.3ad, IEEE 802.3x,IEEE 802d STP, IEEE 802.1q VLAN, IEEE 802.1q-in-q12k self learning MAC address8 x 2.048/1.544 Mbps (E1/T1)Future BusHDB3 (E1) | B8ZS (T1)Up to 3 x E3/DS3BNCHDB3 (E3) | B3ZS (DS3)1 x STM-1/OC-3LC (SFP)2 x STM-16/OC-48LC (SFP)VC-4: 16 x 16; VC-3: 48 x 48;VC-12/VT1.5: 64 x 336CLI, SNMP and TL115 mins & 24 hrs performance statuscomply with G.826J byte ManagementLine & Terminalat least 400 real-time & 400 historic alarmscomply with G.7835% - 85%, non-condensing-10 °C to 55 °C100 - 240 VAC or 32 - 74 VDCTypical: 25 W | Maximum: 35 W19” 1U44 x 482 x 225 mmOrder MatrixC-MUX-2550Multi-service Access Multiplexer with pluggable SFP modulesLine Specifications Interface Specifications PowerSupplyArt.No.Short NameSDH, STM-16SFP LC connectorSONET, OC-48SFP LC connectorE1 or DS1 ports,Future BusE3 or DS3 ports,Coaxial 75 ohmFast Ethernet ports,RJ45 connectorGigabit Ethernet ports,SFP LC connector100...240 VAC-48 VDCx 8 3 8 2 x CMUX-2550-DN-08382x 8 3 8 2 x CMUX-2550-DD-08382x 8 3 8 2 x CMUX-2550-AN-08382x 8 3 8 2 x CMUX-2550-AD-08382x 8 8 x CMUX-2550-DD-08080x 8 8 x CMUX-2550-AD-08080Please order pluggable SFP modules separately.17

Ethernet & Multi-Service over PDH/SDH/SONETC-MUX-2510 | GE to STM-16/OC-48 Fiber Optic MultiplexerNext Generation GFP Multiplexer for Gigabit Ethernet Transmission over SDH/SONET networksProduct Specifications| STM-16/OC-48 Fiber Optic Multiplexer for point-to-point applicationsvia SONET/SDH networks| Connect 2 x Gigabit Ethernet over 1 x STM-16/OC-48| L2 switching on all LAN ports| Time slot assignment capability| Dynamic bandwidth allocation with LACS| Support GFP, X.86 LPAS or RFC1662 PPP| Virtual Concatenation on all data interfaces| Simple Metro reach Ethernet-type services over SONET/SDH networks| Enables up to two Gigabit Ethernet connections| Supports flexible and scalable Ethernet Services| Comprehensive configuration, fault, performance, maintenance andsecurity management tools| Design for flexibility, performance and cost| Compact 19” IU rack mount unitEthernet Interface PortBit rateConnectorComplianceLAN tableLine PortBit rateConnectorFeaturesCross ConnectManagementPerformance MonitoringMaintenanceLoop-backAlarm LogHumidityOperating TemperaturePower SupplyPower ConsumptionMechanicsRack Mount UnitDimensions (H X W x D)2 x 1000BaseSX/LXLC (SFP)IEEE 802.3x, IEEE 802d STP,IEEE 802.1q VLAN, IEEE 802.1q-in-q12k self learning MAC address1 x STM-16/OC-48LC (SFP)VC-4: 16 x 16VC-3: 48 x 48VC-12/VT1.5: 64 x 336CLI, SNMP and TL115 mins & 24 hrs performance statuscomply with G.826J byte ManagementLine & Terminalat least 400 real-time & 400 historic alarmscomply with G.7835% - 85% non-condensing-10 °C to 55 °C100 - 240 VAC or 32 - 74 VDCTypical: 15 W | Maximum: 35 W19” 1U44 x 482 x 225 mmOrder MatrixC-MUX-2510GE to STM-16/OC-48 Fiber Optic MultiplexerGigabit Ethernet Access Multiplexer with pluggable SFP modulesLine SpecificationsInterfaceSpecificationsPower Supply Art.No. Short NameSDH, STM-16SFP LC connectorSONET, OC-48SFP LC connectorGigabit Ethernet ports,SFP LC connector100...240 VAC-48 VDCx 2 x CMUX-2510-DNx 2 x CMUX-2510-DDx 2 x CMUX-2510-ANx 2 x CMUX-2510-ADPlease order pluggable SFP modules separately.18

Ethernet & Multi-Service over PDH/SDH/SONETC-MUX-155 | 155M Multi-service PDH, Ethernet and SDH/SONET Provisioning PlatformNext Generation GFP Fiber Optic Multiplexer for Voice and Data Transmission over STM-1/OC-3Product Specifications| Optical STM-1/OC-3 Multiplexer for point-to-point, point-to-multipointand ring topologies in SONET/SDH networks| Option of 1+1 APS (MSP) or a full ADM module| 4x4 STM-1 Cross Connect; non-blocking with uni-directional, bidirectionaland multicast support| Supports cross connect of lower and higher order tributaries| Simultaneous voice and data transmission| Supports Ethernet Line and Ethernet LAN Services| Cost effective expansion of LANs over SONET/SDH networks| Enables multi-connectivity including: Add and Drop, Ring structure,1+1 P-T-P and P-T-MP| Offers services on demand as a “pay-as-you-grow” solution| Supports flexible and scalable Ethernet Services| Fast ROI with comprehensive management tools| Easy to install, operate and manageEthernet Interface PortBit rateConnectorComplianceLAN tableE1/DS1 Interface PortBit rateConnectorLine CodingJitter PerformanceComplianceE3/DS3 Interface PortBit rateConnectorLine CodingJitter PerformanceComplianceLine PortBit rateConnectorFramingComplianceApplication CodeFeaturesCross ConnectManagementRedundancyComplianceCertificationsHumidityOperating TemperaturePower SupplyConsumptionDimensionsStandalone Unit (W x H x D)10/100/1000BaseTX, auto negotiationRJ45IEEE 802.3x, IEEE 802.3p, IEEE 802.3q, IEEE 802.3s8k MAC addresses2.048/1.544 Mbps +/- 50 ppmRJ45HDB3, B8ZSG.783, G.823, G.824, TR-64211G.70334.368/44.736 Mbps +/- 20 ppmBNCB3ZSG.824G.703155.52 Mbps +/- 4.6 ppmLC (SFP)ITU-T G.707, ANSI T1.105G.957, G.825S1.1, L1.1, L1.24 x 4 STM-1; 12x12 STS-1/VC-3; 336x336 TributarySNMPv3/Web-based Management/DCC1+1 APS (MSP), optionalGFP: G.7031 – Y.1303LACS: G.7042 – Y.1305G.826 (for SDH/ SONET: RS, MS, HP & LP)CE and UL approved10% - 90% non-condensed5°C to 45°C(-36) – (-72) VDC, redundant20 W45 x 223 x 244 mmOrder MatrixC-MUX-155Next Generation Sonet/SDH Access MultiplexerMulti-service Access Multiplexer with pluggable SFP modules, table top unit, without power supplyFO PortSpecificationUplinkFeaturesADMFeaturesCopper InterfaceSet 1Copper InterfaceSet 2Supply Voltage Art.No. Short NamePluggable FO module,type SFP with LC connectorRedundant FO line port forFO link protection, see FO line portRedundant FO line portfor ADM support, see FO line port8 Ethernet interfaces with- 7x 10 / 100BaseTx- 1x 10 / 100 / 1000BaseTx,RJ45 connector8 x G.703 interfaces for 4 x E1/T1 (DS1),RJ45 connector8 x G.703 interfaces for 4 x E1/T1 (DS1),RJ45 connector-48 V DC,redundant power feeding,no power cords included!x x x x x 4640-009 C-MUX-155/PS-ADM-16GR-Vx x x x x 4640-012 C-MUX-155/PS-R-8SR8GR-Vx x x x x 4640-006 C-MUX-155/PS-ADM-8SR8GR-VPlease order pluggable SFP modules separately.Please order external AC power supply separately (1755-008 PS-CM-W).19

Ethernet & Multi-Service over PDH/SDH/SONETS-MUX-155 | Fast Ethernet and E1 to STM-1/OC-3 Fiber Optic MultiplexerCompact Fiber Optic Multiplexer for Voice and Data Applications over one 155 Mbps LineProduct Specifications| Optical STM-1/OC-3c Multiplexer which can be used in point-topointconnection or over SONET/SDH networks| Simultaneous voice and data transmission| 4 x E1/T1 and 1 x 10/100BaseT over 1300nm SM Fiber Optic| Single Fiber transmission solution available| Web based management and integrated error testing| Transmission distance up to 50 km| Economical standalone unit| Preserves the current cash flow from traditional services, such asvoice| Enables new revenue streams generated by high-bandwidth, valueaddedEthernet & IP-based services| Reduces capital expenditures, making the extension of the opticalnetwork to the customer‘s premises economically viable| Simple to install, operate and manage| Reduces operational costs by reducing site visits through full remotemanagementS-MUX-155Data rateEthernet Interface PortEthernetConnectorComplianceE1/T1 Interface PortE1/T1 InterfaceConnectorLine CodingOutput ImpedanceJitter PerformanceComplianceLine PortLine interfaceConnectorFramingComplianceFeatures/CertificationsManagementCertificationsHumidityOperating TemperaturePower SupplyConsumptionEmissionsLaser SafetyDimensionsStandalone Unit (W x H x D)1 x 10/100 Mbps (half/full duplex, auto sensing)4 x 2.048/1.544 Mbps (E1/T1 unframed)1x 10/100BaseTX, auto negotiationRJ45IEEE 802.3, IEEE 802.1Q4 x G.703RJ45 ConnectorHDB3, B8Z3120 Ohm balancedG.823G.703, G.704, G.7061300 nm SM, other Lasers on requestSC-ConnectorSTM-1/VC-4/C-4 for SDH /OC-3cG.957, G.958Web-based ManagementCE and UL approved10%-90% non-condensed0°C-50°C230V AC / 110V AC / 48 V DC9WFCC part 15 class B, EN300-386 class BEN60825-1; 21 CFR 104042 x 140 x 230 mmOrder MatrixS-MUX-155Fast Ethernet and E1 to STM-1/OC-3 Fiber Optic Multiplexer4 x E1/T1 and 10/100 BaseT over STM-1/OC-3c (155 Mbps), without power supplyInterface Type Fiber Optic Transmitter Specification Power Supply Art.No. Short Name4 x E1 / T1, RJ451 x 10/100BaseTx, RJ451300 nm Power Laser,9µm SM, SC connectorWDM option:TX 1310nm, RX 1550 nm,9µm SM, SC connectorWDM option:TX 1550nm, RX 1310 nm,9µm SM, SC connectorAvailable PS:- external AC- external DC- rack power supplyx x x x 4620-002 S-MUX-155/DS-Wx x x x 4620-006 S-MUX-155/Z6S-Wx x x x 4620-007 S-MUX-155/Z4S-WPlease order external power supplies separately (AC: 1755-007 PS-SM-W | DC: 1755-002 PS-SM-V).Please order 19” rack for up to eight S-MUX-155 separately if required (1294-011 RA-SM-155).20

Ethernet & Multi-Service over PDH/SDH/SONETEC-155 | Fast Ethernet over STM-1/OC-3Connecting Fast Ethernet to STM-1/OC-3c (155 Mbps) to connect IP via SDH/SONET networksProduct Specifications| Optical Ethernet/Fast Ethernet to STM-1/OC-3c converter| Connects Ethernet over SONET/SDH networks| Web based management and integrated error testing| Transmission distance up to 50 km| Point to point connection or over SDH networks| Compact standalone unit| Easy connection of two LANs via SDH/SONET network| Point to Point connection of Ethernet/Fast Ethernet networks overSTM-1| Use existing Fibers to transfer data| For distances up to 50 km| Compact standalone unitData RateInterfaceLineEthernet Interface PortEthernetConnectorComplianceLine PortLine moduleConnectorFramingComplianceFiber Optic Specifications1 x 10/100 Mbps155 Mbps1x 10/100BaseTxRJ45IEEE 802.3, IEEE 802.1Q1300 nm Power LaserSCSDH/STM-1 or SONET/OC-3cG.957, G.958Budget / DistanceSinglemode1300 nm Ultra Long Haul FO max. 30 dB / 50 kmFeatures/CertificationsManagementAuto sensingVLAN transportCertificationsHumidityOperating TemperatureEmissionsMTBFLaser SafetySNMP / Web-based ManagementYessupported (transparent)CE and UL approved10%-90% non-condensed0°C-50°CFCC part 15 class B,EN300-386 class B184,622 hrsEN60825-1; 21 CFR 1040Power SupplyVoltageConsumption230/110 VAC, 48VDC9WDimensionsStandalone Unit (W x H x D)50 x 230 x 140 mmOrder MatrixEC-155Fast Ethernet over STM-1/OC-3c1 x 10/100 BaseT over STM-1/OC-3c (155 Mbps), without power supplyInterfaceTypeFiber Optic TransmitterSpecificationPower Supply Art.No. Short Name1 x 10/100BaseTx, RJ-451300 nm Power Laser,9µm SM, SC connectorAvailable PS: - external AC- external DC- rack power supplyx x x 4621-002 EC-155/DS-WPlease order external power supplies separately (AC: 1755-007 PS-SM-W | DC: 1755-002 PS-SM-V).Please order 19” rack for up to eight EC-155 separately if required (1294-011 RA-SM-155).21

Ethernet & Multi-Service over PDH/SDH/SONETGM-E | Fast Ethernet over PDH E3LAN connectivity to E3/T3 data ratesProduct Specifications| 10/100BaseTx interface port with auto-negotiation & auto-crossing| VLAN support according to 802.1q| VT100 management port and additional 10/100BaseTx managementport for TELNET and SNMP management| In-band management of the remote unit| FTP software upload| E3/T3 transmission distance up to 100 m (4 dB budget)| 3U rack mount card or standalone unit| Cost effective Ethernet to E3/T3 conversion| Connect LANs via high speed SDH networks| VLAN support according to 802.1q| Various management facilities| Available as rack mount card or standalone device| Direct connection of LANs of two locations to save time and moneyGM-EData RateInterface PortInterfaceConnectorLine PortInterfaceDistance / Budget (max)ConnectorCodingFeaturesIntegrated BridgeAuto Speed NegotiationAuto-SensingManagementPower SupplyCertificationMechanicsRack Mount CardDimensions (H x W x D)10/100 Mbps10/100BaseTxRJ45E3/T3 (switchable)up to 100 m / 4 dBBNCHDLCYes (with VLAN support)YesYesVT100/SNMP, Telnet230/115 VAC, 48/24 VDCCE, UL3U30 x 130 x 190 mmOrder MatrixGM-EFast Ethernet over PDH E310/100 BaseT Interface Converter for E3/T3, autonegotiation acc. IEEE 802.3u, Rack mount cardOperation Mode Functional Extensions Line Port Specification Line Connector Interface Specification Interface Connector Art.No. Short NameG.703 E3, 34.368 MbpsG.703 T3, 44.736 MbpsTelnet Control Port (RJ45)G.703 E3/T3BNCEthernet Twisted Pair, 10/100 BaseTRJ45x x x x x x x 2820-001 GM-E/GBSR-R22

Ethernet & Multi-Service over PDH/SDH/SONETINV-MUX-E | 8-channel Inverse E1 MultiplexerInverse Multiplexer for PDH/SDH Networks and WAN-IP Switch with routing functionalitiesProduct Specifications| Four Layer-2-Switched Fast Ethernet Ports with VLAN-Support| Eight E1/T1 Links (Bridged or IP-Routed) with up to 248 logicalchannels| Inverse Multiplexing using Multilink-PPP Bridging via one logical link| IP routing with RIP, RIPv2 and OSPF over multiple logical links| IP filter for firewall support, IP accounting, Authentication (PAP,CHAP, RADIUS)| Inverse Multiplexer for PDH/SDH networks| Subscriber link with flexible bandwidth allocation| Access concentrator for network connections| Four E1/T1 Links, bridged or IP-routed| Can be used as an IP-RouterINV-MUX-EData RateEthernet Interface PortEthernetConnectorComplianceE1/T1 Interface PortE1/T1 (DS-1) InterfaceConnectorLine CodingOutput ImpedanceJitter PerformanceFraming StructureBandwith per logicalchannelFeaturesIP RoutingBridgingLink ProtocolSecurity & FirewallManagementPower SupplyElectrical SafetyCertificationsMechanicsRack VersionDimensions (H x W x D)4 x 10/100 Mbps8 x 2.048/1.544 Mbps (E1/T1)4x 10/100BaseTX,half/full duplex, auto negotiation, auto sensingRJ45IEEE 802.3, 802.3I, 802.3u8 x G.703/G.704RJ45 ConnectorHDB3 (E1), B8ZS (T1)120 Ohm balancedE1: ITU-T I.431, G.703, G.736, G.823T1: ITU-T I.431, G.703, G.824, AT&T TR 62411G.703, G.704E1: 64 kbps – 1.984 Mbps or 2.048 MbpsT1: 64 kbps – 1.536 Mbps or 1.544 MbpsIP protocols: IP, ICMP, ARPRouting protocols: RIP, RIP-2, OSPF,static routing, NAT, IP unnumberedTransparent Bridging, VLANPPP, ISDNPAP/CHAP authentication within PPP,IP security, IP masquerading, IP filtering,IP/ISDN accounting, Access control list & password,Authentication via RADIUS protocolOutband Management (via RS232)via Telnet or TFTP with access controlSNMPv1 with access control100...250VAC 50...60 Hz, 36…72VDCEN 60950CE19” 1U44 x 432 x 250 mmOrder MatrixINV-MUX-EInverse Multiplexer for PDH/SDH Networks8 x E1/T1 and 4 x 10/100 BaseTx Interfaces with bridging and routing functionalityProductDesignOperationModeFunctionalExtensionsLine PortSpecificationLine PortConnectorUser PortProtocolUser PortConnectorPowerSupplyArt.No.Short NameStandalone UnitG.703 E1, 2.048 MbpsG.703 T1, 1.544 MbpsControl PortTelnet / TFTPSNMPE1/T1 (ITU G.703)RJ45 (8x)10/100 BaseT (IEEE 802.3)RJ45 (4x)230 V AC48 V DCx x x x x x x x x 4701-003 INV-MUX-8-E/Ex x x x x x x x x 4701-004 INV-MUX-8-E/V23

Ethernet & Multi-Service over PDH/SDH/SONETINV-MUX-S | 4-channel Inverse E1 MultiplexerInverse Multiplexing with bridge and routing functionalitiesProduct Specifications| Fast Ethernet Port with VLAN Support| Four E1/T1 Links (Bridged or IP-Routed)| Inverse Multiplexing using Multilink-PPP| Bridging via one logical link| IP routing with RIP and RIPv2 over multiple logical links| 6U rack mount card (19”, 1U unit on request)| Authentication (PAP, CHAP)| Inverse Multiplexer for PDH/SDH networks| Subscriber link with flexible bandwidth allocation| Access concentrator for network connections| Four E1/T1 Links, bridged or IP-routed| Can be used as an IP-RouterINV-MUX-SData RateEthernet Interface PortInterfaceConnectorComplianceE1/T1 Interface PortE1/T1 Interface PortConnectorLine CodingOutput ImpedanceJitter PerformanceComplianceFeaturesIP RoutingBridgingLink ProtocolSecurity & FirewallManagementPower SupplyElectrical SafetyCertificationsMechanicsRack Mount CardDimensions (H x W x D)1 x 10/100 Mbps4 x 2.048/1.544 Mbps (E1/T1)1x 10/100BaseTX,half/full duplex, auto negotiation, auto sensingRJ45IEEE 802.34 x G.703/G.704RJ45 ConnectorHDB3 (E1), AMI (T1)120 Ohm balancedE1: ITU-T I.431, G.703, G.736, G.823T1: ITU-T I.431,G.703, G.824, AT&T TR 62411G.703, G.704IP protocols: IP, ICMP, ARPRouting protocols: RIP, RIP-2, static routing,IP unnumberedTransparent Bridging, VLAN Tagging,Spanning Tree Protocol (STP)PPPPAP/CHAP authentication within PPPOutband Management (via RS232)via Telnet or TFTP with access controlSNMPv1 with access control100...250 VAC 50...60 Hz, 36…72 VDCEN 60950CE6U30 x 262 x 170 mmOrder MatrixINV-MUX-S4-channel Inverse E1 Multiplexer4 x E1/T1 and 1 x 10/100 BaseTx Interfaces with bridging and routing functionalityProductDesignOperationModeFunctionalExtensionsLine PortSpecificationLine PortConnectorUser PortProtocolUser PortConnectorPower Supply Art.No. Short NameRackmount CardG.703 E1, 2.048 MbpsG.703 T1, 1.544 MbpsRS232LAN (IEEE 802.3)G.703 E1/T1RJ-45 (4x)10/100 BaseT (IEEE 802.3)RJ-45 (2x)via 19“ Chassis or Single Slot Housingx x x x x x x x x 4705-010 INV-MUX-S/M4-R24

Ethernet & Multi-Service over PDH/SDH/SONETINAX | 4-channel to E1 MultiplexerCombining up to 4 applications via a single E1 connectionProduct Specifications| Data rates: n x 64 kbps up to 1984 kbps| Interface: G.703, X.21, V.35, BRI (ISDN So)| Line: G.703/G.704 (E1)| 1 fixed G.703 and 3 optional interfaces| VT100 Management/SNMP available| Optional redundant power supply AC/DC for standalone units| 6U rack mount card or standalone unit| Multiple units can be cascaded to offer even denser multiplexing| Very flexible solution due to several I/F possibilities| Easy to configure and maintain due to management| 6U rack mount card or as standalone unitINAXData RateInterface PortInterfaceConnectorLine PortConnectorCodingDistance / Budget (max)CopperFeaturesManagementPower SupplyCertificationsMechanicsRack Mount CardDimensions (H x W x D)n x 64 kbpsmax. 1984 kbps1 fixed G.703 + up to 3 different modules:X.21, V.35, BRI (ISDN SO)DB-15, DB-25, RJ45RJ45, BNCHDB3 (G.703)300 m / 40 dBVT100, SNMP optional230/115 VAC, 48/24 VDCCE, UL6U30 x 265 x 190 mmOrder MatrixINAX4-channel to E1 MultiplexerMultiplexer for fractional E1 Leased Lines, Management via Control PortLineSpecificationInterface 1SpecificationInterface 1ConnectorInterface 2SpecificationInterface 2ConnectorInterface 3SpecificationInterface 3ConnectorArt.No.Short NameG.703, RJ45G.703, BNCBRI (So)V.35G.703RJ45DB-15DB-25BRI (So)V.35G.703RJ45DB-15DB-25BRI (So)V.35G.703RJ45DB-15DB-25x x x x x x x 4610-056 INAX-R-J-C/GR-525252-Rx x x x x x x 4610-065 INAX-R-J-C/GR-BRBRBR-Rx x x x x x x 4610-102 INAX-R-J-C/GB-111111-Rx x x x x x x 4610-041 INAX-R-J-C/GR-111111-R25

Ethernet & Multi-Service over PDH/SDH/SONETINAX-CV | 2-channel to E1 Fractional MultiplexerA flexible and cost effective solution to optimize leased fiber or copper linesProduct Specifications| Data rate: n x 64 kbps (max. 1984 kbps)| Interface: G.703, V.35, 10/100BaseT (auto-sensing) including VLANsupport| Line: G.703, G.704 (E1)| One fixed G.703 and one selectable interface| Transmission distance on line interface up to 45 km (Fiber Optic)| Management via VT100/SNMP| 3U rack mount card or standalone unit| Multiplex two electrical inputs to one fiber or copper line| Second selectable interface port| Support of fractional data rates| Optional back up line port available| Management via VT100/SNMP| Practical 3U rack mount card or as standalone unitINAX-CVData RateInterface PortInterface ModuleConnectorLine PortCopperConnectorCodingDistance / Budget (max)n x 64 kbpsmax. 1984 kbpsG.703, V.35, 10/100BaseTDB-25, RJ45E1RJ45HDB3 (E1)G.703 300 m / 40 dBFeaturesManagementPower SupplyCertificationsVT100/SNMP230/115 VAC, 48/24 VDCCE, ULMechanicsRack Mount CardDimensions (H x W x D)3U30 x 130 x 190 mmOrder MatrixINAX-CVMultiplexer for fractional E1 Leased Lines, fixed G.704 Port, RJ45 (Interface 2), Control Port, Rack Mount CardLineSpecificationInterface 1SpecificationInterface 1ConnectorArt.No.Short NameG.703, RJ45Ethernet BridgeV.35RJ45DB-25x x x 4610-067 INAX-CV-J-C/GR-GR52-Rx x x 4610-110 INAX-CV-J-C/GR-GRDR-R-S1026

Ethernet & Multi-Service over PDH/SDH/SONETGM-F | Ethernet or Fractional 4-wire Copper to E1 MultiplexerFlexible 4-wire transmission with HDB3 coding, a truly cost effective solutionProduct Specifications| Data Rates: ranging from n x 64 kbps up to 2048 kbps| Compatible interfaces: X.21, V.35, 10/100BaseT (supports VLANand 10/100BaseT auto-sensing),| Connector: DB-15, RJ45 and Winchester connectors| Line: Data coding HDB3 (E1) (BNC, RJ45)| Transmission distance: up to 2 km| VT100 Management/SNMP available| 3U rack mount card or standalone unit| Fractional 4-wire transmission of G.703 signals| Supports VLAN and 10/100BaseT auto-sensing for Ethernet Bridge| Wide range of I/F possible| Easy to configure due to SNMP management| 3U rack mount card or standalone unitGM-FData RateInterface PortInterfaceConnectorLine PortInterfaceDistances / Budget (max)ConnectorCodingFeaturesVLAN supported10/100BaseT auto-sensingManagementPower SupplyCertificationsMechanicsRack Mount CardDimensions (H x W x D)up to 2048 kbpsn x 64 kbpsX.21, V.35, 10/100BaseTDB-15, Winchester, RJ45, BNCFractional E1up to 2 km / 40 dBBNC, RJ45HDB3 (FE1)YesYesVT100/SNMP230/115 VAC, 48/24 VDCCE, UL3U30 x 130 x 190 mmOrder MatrixGM-FFractional E1 Converter/ModemFor fractional E1 leased lines, n x 64, Contol Port, Rack mount cardOperationModeFunctionalExtensionsLine PortSpecificationLineConnectorInterfaceSpecificationInterfaceConnectorArt.No.Short NameG.703, E1 up to 2048 kbpsControl PortG.703, HDB3RJ45BNCX.21V.24V.35Ethernet BridgeBasic Rate Interface (BRI, S0)DB-15WinchesterRJ45x x x x x x 2806-001 GMR-FFJ-C/GR11-Rx x x x x x 2806-004 GMR-FFJ-C/GR5W-Rx x x x x x 2806-034 GMR-FFJ-C/GRDR-Rx x x x x x 2806-012 GMR-FFJ-C/GB11-Rx x x x x x 2806-038 GMR-FFJ-C/GBDR-R27

LAST MILE | TDM ACCESSNext Generation Multi Access Connectivity SystemThe MACS4000 System enables the user to create an ownMulti Access Connectivity System by using different modemsor converter cards. Virtually, all high-end application demandsare met by the various options of using copper or fiber opticmodems and converters and the interface modularity of thesecards.The universal Pandatel MACS4000 system enables the installationof up to 24 Pandatel rack mount cards in one 19” chassis,e.g. converters, modems and multiplexers.Using VT100, Telnet or SNMP to access the managementfunctions enables network administrators to easier integratethe new MACS4000 system with an existing environment.Applying software updates, over VT100 or FTP, make the systemeasy to maintain and provide high investment security.In addition, the system comes with services like bandwidthlimitation or optional temperature monitoring, data transportor power supply of the local and remote chassis thus offeringa perfect solution to sell services and to centrally managednetworks.Pandatel’s new web-based graphical user interface “MACSView” is an easy and comfortable tool to set up and monitorthe entire system.ContentET-CB | Multi-port Copper/Fiber Gigabit Ethernet Switch andConverterET-CA | Copper/Fiber Fast Ethernet Switch and ConverterCOP-FE | Next Generation E1 Multiplexer over Fast EthernetCOP-RS | TDM Copper or Fiber Multiplexer over Fast EthernetCOP-FO | TDM Fiber MultiplexerEMUX-M21 | E1/T1 to E3/T3 Access MultiplexerFME-M | Modular 6-channel G.703 Fiber Optic MultiplexerCM-G | Modular 2/4-wire G.SHDSL ModemOM-F | Modular Optical Modem for Fractional E1CC-F | Modular Copper Converter for Fractional E1IM-C/S | Interface Modules for MACS4000FH/FL-P | Optical E1 ModemFL-F | Low Cost Fractional Optical E1 ModemFL-E | E3/T3 Fiber Optic ModemFL-S | SDH/SONET Media Converter/ModemDV-C | Digital Fiber Optic Video and Data Converter28

Last Mile | TDM AccessET-CB | Multi-port Copper/Fiber Gigabit Ethernet Switch and ConverterThe ideal Combination of switching & conversion to 1000BaseSX/LX/TProduct Specifications| 6 x 100BaseFx fiber optic ports or 8 x 10/100BaseTx copper portsand up to 2 x GbE line ports with SFP interface| Single and Double VLAN tagging (QinQ) per port| Supports Ethernet Automatic Protection Switching (EAPS)| Supports Rapid Spanning Tree Protocol (RSTP)| Performance monitoring on all ports| SNMP Agent onboard| Permanent remote in-band management due to IP forwarding| Ethernet converter or multi-port broadband switch| Rack mount card (3U) with up to eight Ethernet user ports and upto two GbE line ports| Transmission of up to eight times 100 Mbps via a single fiber usingWDM technology| Guarantees connectivity and high availability due to Ethernet AutomaticProtection Switching or Spanning Tree| 1:1 line redundancy| Tamper-proof bandwidth limitation per portCopper User PortsPort densityInterfaceConnectorAuto-SensingAuto-Crossing (MDI/MDIX)Fiber Optic User PortsPort densityInterfaceConnectorFiber Optic Line PortsPort densityInterfaceConnectorWavelengthFeaturesManagement AccessManagement PortIn-band ManagementRemote Flash UpdateBandwidth LimitationPerformance MonitoringDHCP Client SupportVLAN SupportCoSSupported MAC AddressesLink Failover (redundancy)Rapid Spanning TreeLPT/RFD SupportSingle Fiber Solution (WDM)Power ConsumptionPower SupplyMechanicsRack Mount CardDimensions (H x W x D)up to 810/100BaseTx (full/half duplex)RJ45YesYesup to 6SFP Modules (100BaseFx)SFP modules with LC2SFP Modules (GbE)LC (fiber optic line) or RJ45 (copper line)e.g. 1310 nm MM/SM, 1550 nm SM, WDMSNMPv1, SNMPv2c, Telnet/SSH, VT100 via MACS4000agent or one-slot housingconfigurable to any copper or fiber optic portYesYesYesYesYes16 port based VLANs with tagging acc. IEEE802.1Q anddouble tagging (QinQ)4 priority queues, priority marking acc. 802.1p4096acc. RFC3619 (EAPS)acc. IEEE 802.1d, IEEE 802.1wYesYes< 10W230/115 VAC or 48 VDC3U30 x 130 x 190 mmOrder MatrixET-CBBroadband Ethernet ConverterManaged GbE Converter with Switch Functionality, 3U Rack Mount Card for MACS4000Port density Functional Extension Art.No. Short Name2 x GbE Ports (SFP)8 x 10/100BaseTx Ports (fixed RJ45)2 x GbE Ports (SFP)2 x GbE Ports (SFP)6 x 10/100BaseTx Ports (SFP)1 x GbE Port (SFP)1 x GbE Port (fixed RJ45)Seperate IP Management Port(10/100BaseTx, RJ45)x 5008-001 ETR-CB28/PSSR-3Rx x 5008-003 ETR-CB26/PSSR-3Rx 5008-002 ETR-CB20/PS-3Rx x 5008-004 ETR-CB11/PSSR-3RPlease order SFP modules separately.29

Last Mile | TDM AccessET-CA | Copper/Fiber Fast Ethernet Switch and ConverterThe ideal Combination of switching & conversion into an Optical SignalProduct Specifications| Up to 4 ports 10/100BaseTx with auto-sensing, auto-crossover(MDI/MDIX) & full/half duplex detection| Up to 2 ports 100BaseFX with SFP interface| Redundancy for the line ports| SFP transceiver for short, long haul and WDM applications available| SNMP Agent on-board| Secure configuration via SSHv2 (Secure Shell) terminal| Ethernet converter or multi-port switch| Tamper-proof bandwidth limitation per port in steps of 1Mbps| VLAN support including double tagging (QinQ) per port| Permanent remote in-band management| Performance monitoring on all ports| Remote flash software update| 1:1 optical redundancy| Rack mount card (3U) with up to 6 Ethernet portsCopper User PortsPort densityInterfaceConnectorAuto-SensingAuto-Crossing (MDI / MDIX)Fiber Optic PortsPort densityInterfaceConnectorWavelengthsFeaturesManagement AccessManagement PortIn-band ManagementRemote Flash UpdateBandwidth LimitationPerformance MonitoringDHCP Client SupportVLAN SupportSupported MAC AddressesMaximum Packet SizeLPT/RFD SupportSingle Fiber Solution (WDM)Power ConsumptionPower SupplyMechanicsRack Mount CardDimensions (H x W x D)2 or 410/100BaseTx (full/half duplex)RJ45YesYes1 or 2SFP Modules (100BaseFX)LCe.g. 1310nm MM/SM, 1550nm SM, WDM)SNMPv.1, Telnet/SSH, VT100 via MACS4000 agent ortable-top housingconfigurable to any copper or fiber optic portYesYestamper-proof in steps of 1 Mbps per portYesYes16 port based VLANs with tagging acc. IEEE802.1Q anddouble tagging (QinQ)40964032 ByteYesYes< 4W (3 port variant), < 6W (6 port variant)230/115V AC or 48V DC3U30 x 130 x 190 mmOrder MatrixET-CAAdvanced Ethernet ConverterManaged Switch, 10BaseT/100 BaseTX to 100BaseFX, 3U Rack-Mount-Card for MACS4000Port density Fiber Optic Copper Port Connector Art.No. Short Name1 FO Port and 2 Copper Ports2 FO Ports and 4 Copper PortsPluggable SFP Module SlotRJ-45x x x 5007-020 ETR-CA12/PSSR-3Rx x x 5007-220 ETR-CA24/PSSR-3RPlease order SFP modules separately.30

Last Mile | TDM AccessCOP-FE | Next Generation E1 Multiplexer over Fast EthernetTDM Copper or Fiber Multiplexer for Ethernet, IP, MPLS or VLANProduct Specifications| Protocol transparent data transmission for E1/T1| Data rates: 4 x E1/T1 (2.048/1.544 Mbps) plus 2 x 10/100BaseTX| Supports fractional (n x 64 kbps) and grooming services| External reference clock port| Increase the number of interfaces by cascading COP-FEs| Redundant copper or fiber optic interface on the line site, supportingseveral wavelengths| Management features like SNMP, Telnet & web-based GUI| Cost-effective extension of four traditional E1/T1 data interfacesplus two Ethernet interfaces over Packed Switched Networks (PSN)| Optimized use of packet based infrastructure| Supports Ethernet, IP, MPLS, VLAN and double VLAN tagging| Efficient use of existing bandwidth for legacy data via less expensivePSN| Enables Point-to-Point and Point-to-Multipoint applications| Supports QoS on different layers depending on the PSN type| Superior clock recoveryOrder MatrixLAN, Ethernet Interface PortBit rateComplianceMAC Address tableE1/T1 Interface PortBit rateLine CodingImpedanceJitter PerformanceComplianceFiber Optic SpecificationsSinglemodeEthernet Management PortBit RateConnectorComplianceMAC Address tableFeaturesManagementQuality of Service (QoS)RedundancyCertificationHumidityOperating TemperaturePower SupplyConsumptionReference Clock PortReference clock rateComplianceMechanicsRack Mount CardStandalone UnitCompact 5U Version2 x 10/100BaseTX, auto negotiation, auto crossoverIEEE 802.1p, IEEE 802.1q , IEEE 802.3, IEEE 802.3u1k MAC addresses4 x 2.048/1.544 Mbps +/- 50/32 ppmHDB3 (E1), B8ZS, AMI (T1)120 Ohm (E1), 100 Ohm (T1)G.823, G.824, G.812 (Type VI),EN302 084, T1.101 (Stratum 4)G.703, G.704Budget/Distance1300 nm: 15b dB/ 15 km*4 x 10/100BaseTX or 2 x 10/100BaseT + 2 x 100BaseFXRJ45 or LC (SFF)IEEE 802.1p, IEEE 802.1q1k MAC addressesSNMP, Telnet and DHCP client functionality,web-based GUIAccording IEEE802.1p VLAN (priority field),priority labeling (ToS), MPLS labelConfigurableCE and UL approved10% - 90% non-condensed-5°C to 45°C110/230V AC or 48V DC< 12 W2048 kHzG.7036U45 x 285 x 240 mm (H x W x D)45 x 224 x 175 mm (H x W x D)COP-FECircuit Emulator Over Packet switched Networks with Fast Ethernet LineAccess Multiplexer for voice and data transmission via Ethernet, MPLS or IP networksPort DensityEthernet TDM Mgmt.FunctionalExtensionDesign Art.No. Short Name100BaseFX, SFF (LC), 1300nm,Singlemode10/100BaseT, RJ45E1/T1-Interface, RJ45Reference Clock Port In- &Output, RJ4510/100BaseT, RJ45RS232, SUB-D9SNMP Agent on-boardRack Mount Card, 6UCompact Standalone Unit withexternal Power Supply, 5U1 1 1 x x x 4635-002 COPR-FE-111/DLSRGR-6R1 2 4 x x x x 4635-004 COPT-FE-124/9LSRGR-C-5U-W2 2 4 x x x 4635-101 COPR-FE-224/9LSRGR-C-M-6R4 4 x x x x 4635-204 COPT-FE-044/SRGR-C-5U-W2 1 x x x x 4635-205 COPT-FE-021/SRGR-C-5U-W2 2 4 x x x x TBD COPT-FE-224/9LSRGR-C-5U-WPlease order external power supplies separately (AC: 1755-007 PS-SM-W | DC: 1755-002 PS-SM-V).31

Last Mile | TDM AccessCOP-RS | TDM Copper or Fiber Multiplexer over Fast EthernetExtending Multi-protocol Serial Interfaces over Packet Switched NetworksProduct Specifications| Protocol transparent data transmission for n x 64 kbps (up to 2048kbps)| Up to 2 x serial interfaces (e.g. EIA530, X.21, V.35)| Up to 3 x Ethernet interfaces (1 x 10/100BaseTx & 2 x 100BaseFX)| Ethernet ports can be configured as LAN or WAN (line) port, as wellas backup ports (redundancy) or link aggregation ports| Increase nos. of interfaces by cascading COP-RS via LAN ports| Supports QoS on different layers depending on the PSN type| Cost-effective extension of two serial data interfaces over packedswitched networks (PSN)| Additionally up to three 10/100 Mbps Ethernet interfaces configurableas LAN or WAN (line) port| Software selectable multi-protocol serial interfaces| Optimized use of packet based infrastructure| Supports Ethernet, IP, MPLS, VLAN and double VLAN tagging| Efficient use of existing bandwidth for legacy data via less expensivePSN| Enables Point-to-Point and Point-to-Multipoint applicationsSerial Interface PortsPort densityBit rateConnectorProtocolsComplianceLAN/WAN Ethernet PortsPort densityBit rateConnectorComplianceBandwidth ControlSpanning TreeSupported MAC AddressesFeaturesManagement AccessDHCP Client SupportTFTP SW DownloadQuality of Service (QoS)RedundancyCertificationHumidityOperating TemperaturePower SupplyConsumptionMechanicsRack Mount CardStandalone Unit (RA-T-V)Compact VersionMax. 2n x 64/56 kbps (n = 1..32)D-Sub25 (RS530), Winchester – female (V.35)RS232 (V.24), RS449 (V.36), RS530, V.35, X.21NET1, NET2 and TBR2Max. 310/100BaseTx or 100BaseFXRJ45 or SFP module slotIEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3uSelectable Data Rates:256, 512 kbps and 1, 2, 4, 8, 16, 32, 64 MbpsSTP (802.1d), RSTP (802.1w)1024Via VT100, SNMP, Telnet, SSH2 & web-based GUIConfigurable for management and WAN (line) portVia management and WAN (line) portAccording IEEE802.1p VLAN (priority field),priority labeling(ToS), MPLS labelConfigurable for the WAN (line) portsCE and UL approved10% - 90% non-condensing-5°C to 45°C110/230V AC or 48V DC< 10 W6U45 x 285 x 240 mm (H x W x D)45 x 224 x 175 mm (H x W x D)Order MatrixCOP-RSTDM Copper or Fiber Multiplexer over Fast EthernetAccess Multiplexer for voice and data transmission via Ethernet, MPLS or IP networksPort DensityEthernet TDM Mgmt.FunctionalExtensionDesign Art.No. Short Name100BaseFX, pluggable module, type SFP10/100BaseT, RJ45RS-530 Interface, DB25V.35 Interface, Winchester (M34)10/100BaseT, RJ45RS232, SUB-D9SNMP Agent on-boardCompact Stand-alone Unit with 5VExternal Power Supply, 5URack Mount Card, 6U2 2 x x x x 4636-001 COPT-RS-0220/SR-92-5U-W2 1 2 x x x x 4636-201 COPT-RS-2120/PSSR-92-5U-W2 1 2 x x x 4636-203 COPR-RS-2120/PSSR-92-6R2 1 2 x x x 4636-213 COPR-RS-2120/PSSR-5W-6RPlease order external power supplies separately (AC: 1755-007 PS-SM-W | DC: 1755-002 PS-SM-V).32

Last Mile | TDM AccessCOP-FO | TDM Fiber MultiplexerExtending Multi-protocol Serial Interfaces over Packet Switched NetworksProduct Specifications| Protocol transparent data transmission for E1/T1, RS530, V.35, X.21| Up to four E1/T1 interfaces (2.048/1.544 kbps or n x 64 kbps)| Up to two Ethernet interfaces (10/100BaseTx)| Up to two fiber optic ports, several wave-lengths are supported| Redundant fiber optic interface on the line port| Management features like SNMP, Telnet & web-based GUI| 6U rack mount card or compact standalone unit| Cost-effective extension of up to four traditional data interfaces plusup to 3 x 10/100 Mbps Ethernet interfaces over Fiber Networks| Support of fractional E1/T1 interfaces and a wide range oflegacy serial data interfaces as RS530, V.35 and X.21| Bridge copper signals over fiber up to a maximum of 90km| Supports CWDM and DWDM by the use of SFPs| Enhanced Redundancy to offer reliable communication| Enables Point-to-Point and Fiber ring applications| Easy to install, operate and manageE1/T1 Interface PortsData RateConnectorLine CodingImpedanceJitter PerformanceComplianceSerial Interface PortsData RateConnectorProttocolClock ModeComplianceEthernet PortsData RateConnectorComplianceMAC-Address Table SizeBandwidth ControlFeaturesTFTP SW DownloadRedundancyCertificationHumidityOperating TemperaturePower SupplyPower ConsumptionMechanicsRack Mount CardStandalone Unit (RA-T-V)Compact 5U Version2.048/1.544 kbps +/- 50/32 ppm (unframed mode)n x 64 kbps (fractional mode)RJ45HDB3 (E1); B8ZS/AMI (T1)120 Ohm (E1);100 Ohm (T1)G.823, G.824, G.812 (Type VI),EN302 084, T1.101 (Stratum 4)G.703, G.704n x 56/64 kbps (1..32)D-Sub25 (RS530) | Winchester (V.35)RS232 (V.24), RS449 (V.36), RS530, V.35, X.21DCE: RX & TX clock output, S-clock inputDTE: RX & TX clock input, S-clock inputNET1, NET2 and TBR210/100BaseTx (auto-neg, full/half duplex, auto crossover)RJ45IEEE 802.1p, IEEE 802.1q, IEEE 802.3, IEEE 802.3u1k128, 256, 512 kbps and 1, 2, 4, 8, 16, 32, 64 MbpsVia management and (line) portConfigurable for the fiber portsCE and UL approved10% - 90% non-condensing-5°C to 45°C110/230V AC or 48V DC< 10 W6U45 x 285 x 240 mm (H x W x D)45 x 224 x 175 mm (H x W x D)Order MatrixCOPTDM Fiber MultiplexerAccess Multiplexer for voice and data transmission via Ethernet, MPLS or IP networksPort DensityEthernet TDM Mgmt.FunctionalExtensionDesign Art.No. Short Name100BaseFX, pluggable module,type SFP100BaseFX, SFF (LC), 1300nm,Singlemode10/100BaseT, RJ45E1/T1-Interface, RJ45RS-530 Interface, DB25V.35 Interface, Winchester(M34)10/100BaseT, RJ45RS232, SUB-D9SNMP Agent on-boardRack Mount Card, 6UCompact Standalone Unit withexternal Power Supply, 5U1 1 1 x x x 4635-002 COPR-FE-111/DLSRGR-6R1 2 4 x x x x 4635-004 COPT-FE-124/9LSRGR-C-5U-W2 2 4 x x x 4635-101 COPR-FE-224/9LSRGR-C-M-6R2 2 4 x x x x TBD COPT-FE-224/9LSRGR-C-5U-W2 1 2 x x x x 4636-201 COPT-RS-2120/PSSR-92-5U-W2 1 2 x x x 4636-203 COPR-RS-2120/PSSR-92-6R2 1 2 x x x 4636-213 COPR-RS-2120/PSSR-5W-6RPlease order external power supplies separately (AC: 1755-007 PS-SM-W | DC: 1755-002 PS-SM-V).33

Last Mile | TDM AccessEMUX-M21 | E1/T1 to E3/T3 Access MultiplexerCost-effective E3/T3 Access Multiplexer to connect Company Networks to Metro Area NetworksProduct Specifications| Access Multiplexer for E3 and T3 (DS-3) speeds via Copper or FiberOptic on the line| Data rate for up to 21 x E1/T1 (DS-1) (2.048 Mbps/1.544 Mbps)| VT100, Telnet and SNMP Management| Redundant AC or DC power supply| Compact 19”, 2U design| E3/T3 (DS-3) Access Multiplexer| 21 x E1/T1 (DS-1) user interfaces| Copper or fiber optic for line side| Simple to install, operate and manage| Compact 19” 2U rackEMUX-M21Data RateInterface PortInterface ModuleConnectorLine PortData RateCopperFiber OpticConnectorCodingDistance / Budget (max)CopperG.703 / BNC / 75 OhmSinglemode1300 nm / LaserFeaturesManagementSingle Fiber Solution (WDM)Power SupplyMechanicsRack VersionDimensions (H x W x D)21 x E1/T1 (DS-1)2.048 Mbps / 1.544 Mbps21 x E1/T1 (DS-1)RJ4534.368 Mbps / 44.736 MbpsE3/T3 (DS-3)SinglemodeBNC (Copper) SC (Fiber Optic)HDB3 (E3), B3Z3 (T3/DS-3)60 m / 8 dB50 km / 27 dBVT100 / Telnet / SNMPOptional230/115 VAC, 48VDC redundant19‘‘, 2U86 x 465 x 360 mmOrder MatrixEMUX-M21E1/T3 to E3/T3 Access MultiplexerMain unit21 x E1/DS1 230/115VAC 48 VDC Art.No. Short Namex x 4660-005 EMUX-M21/PMM-Wx x 4660-006 EMUX-M21/PMM-VMMModular Fiber Optic or G.703 E3/T3 (DS-3) Line Modules for EMUX-M21Line Port Copper Line Module Fiber Optic Line Module Art.No. Short NameE3 / T3 (DS-3) supportBNC connector1300nm SM Long Haul FO,SC connectorx x 4662-050 MM-C/GBx x 4662-004 MM-F/4S34

Last Mile | TDM AccessFME-M | Modular 6-channel G.703 Fiber Optic MultiplexerModular Multiplexer with 6 interface ports for extensive data transmissionFME-MData Rate64 ... 2048 kbps or 48.25 ... 1544 kbpsInterface PortInterface ModuleConnectorG.703, X.21, V.24, V.35, V.36, 10/100BaseTx, BRIDB-15, DB-25, RJ45, Winchester, BNC| Save precious copper lines via multiplexing up to 6 inputs to onlyone fiber| Bridge copper signals over fiber up to a max. of 40 km| Step by step extension as needed, without additional access equipment| Cascade up to 4 racks| No balloons, no patch cables! All Interfaces available!Product Specifications| Up to 6 modular interfaces with up to 2 Mbps each for utilization ofthe interface modules| Transmission distance up to 40 km| Optionally redundant optical fiber line and power supply| Integrated VT100, optional SNMP Management system via proxyagents| Line Interface: 850/1300 nm Multimode, 1300 nm Singlemode| 19” 1U rack mount unitLine PortFiber OpticConnectorCodingDistance / Budget (max)Multimode850 nm1300 nmSinglemode1300 nm / LEDFeaturesManagementSingle Fiber Solution (WDM)Power SupplyPower ConsumptionCertificationsMechanicsRack VersionDimensions (H x W x D)1300/1550 nm SinglemodeFC-PC, ST4B5B1 km / 11dB5 km / 9 dB40 km / 17 dBVT100, SNMP Manageable via Proxy AgentYes230/115VAC, 48VDC< 18 WCE, UL19‘‘, 1U50 x 485 x 275 mmOrder MatrixFME-MModular 6-channel G.703 Fiber Optic MultiplexerUp to 6 x E1/T1 Channels, Modular Assembly, Management via Control Port, Alarm Relay ContactOperationModeFiber OpticFiber OpticConnectorPowerSupplyArt.No.Short NameG.703, E1850nm MultimodeEconomic FO1300nm MultimodeEconomic FO1300nm SinglemodeStandard FOSTFC-PC230V AC Euro Plug48V DCx x x x 4550-022 FME-MM-B/9F-Vx x x x 4550-004 FME-MM-B/9F-Ex x x x 4550-034 FME-MM-B/8T-Ex x x x 4550-021 FME-MM-B/3T-EIMPluggable Interface Modules for FME-MSupported Products Interface Specification Interface Connector Art.No. Short NameFME-MX.21V.24V.35G.703, E1 @ 2048kbpsEthernet BridgeBasic Rate Interface(ISDN, S 0)820 nm MultimodeStandard FODB-15DB-25WinchesterRJ45BNCSTx x x 1765-009 IM-11x x x 1765-015 IM-42x x x 1765-016 IM-5Wx x x 1765-011 IM-J/GBx x x 1765-008 IM-J/GRx x x 1765-017 IM-DRx x x 1765-019 IM-BRx x x 1765-022 IM-J/8T35

Last Mile | TDM AccessCM-G | Modular 2/4-wire G.SHDSL Modem2/4-wire G.SHDSL transmission at its best with flexible interface modulesProduct Specifications| Data rate: up to 2312 kbps/4624 kbps (for 2/4-wire respectively)| Line data rate in steps of n x 64 kbps (E1 unframed 2048 kbps)| Selectable interfaces: G.703, V.35, X.21 & Ethernet Bridge| Transmission distance: up to 6.5 km/12 km (for 2312/192 kbpsrespectively)| Inband remote management and line speed auto-detection| VT100 via Single Slot Housing RA-T-V and optional SNMP managementvia rack agent available| Long distance transmission over copper lines using G.SHDSL (up to12 km)| Adjustable line speed to optimize between speed and transmissiondistance of data| A variety of interfaces are selectable using a IM-C interface moduleplus basic CM-G card| Available as rack mount card or as standalone unit| Automatic remote configurationData RateOn Interface PortOn Line PortUser Interface PortModular Interface PortFixed InterfaceLine PortsInterfaceCopper LineConnectorCodingDistances*/Budget (max)FeaturesModular Interface ModuleIntegrated BridgeManagementIn-band ManagementLine Speed Auto-DetectionBit Stuffing for Less than 192kbps on LinePerformance MonitoringAuto-sensingLoop backLEDsClockingOvervoltage/lightningProtectionPower ConsumptionPower SupplyMechanicsRack Mount CardDimensions (H x W x D)Up to 2312 kbps for 2-wireUp to 4624 kbps for 4-wireG.SHDSL: 192 – 2312 kbpsX.21 | DB15, V.35 | Winchester, Ethernet | RJ45E1 | RJ45, E1 | BNCG.SHDSL acc. ITU-T G.991.22-wire or 4-wireRJ45TC-PAM16Up to 12 km @ 192 kbpsUp to 6.5 km @ 2312 kbpsSupportedIf equipped with FE ModuleVT100 via Single Slot HousingSNMP via MACS4000 AgentYesYesYesYesIn Compliance to ITU-T G.994.1and ITU-T G.997.1Terminal and Facility Loop per PortFor Loops, Clock, Interface & Line SupervisionInternal, External, Remote – Single/Dualacc. ITU-T K20 and ITU-T K21< 7 W230/115VAC or 48/24VDC3U30 x 130 x 190 mmOrder MatrixCM-GG.SHDSL Copper ModemControlable rack mount card for MACS4000, Multirate G.SHDSL Copper Modem (Dual Wire or Quadruple Wire)G.SHDSL PortSpecificationFunctionalExtensionLine PortSpecificationLineConnectorInterfaceSpecificationInterfaceConnectorArt.No.Short Name2-Wire4-WireControl PortK20/21 Overvoltage ProtectionG.SHDSL, TC-PAM 16RJ45Fractional G.703/G.704, n x 64 kbpsup to 2048 (unframed), onboardSupport of PANDATEL Copper InterfaceModulesRJ45BNCProprietaryx x x x x x x x 2860-002 CMR-G11/QWIM-3R*)x x x x x x x x 2860-004 CMR-G11/QWFGR-3Rx x x x x x x x 2860-006 CMR-G11/QWFGB-3R*)Please order interface module separately.Possible Interface Modules IM-C/S36

Last Mile | TDM AccessOM-F | Modular Optical Modem for Fractional E1Modular E1 Fiber Optic ModemProduct Specifications| Data rate: up to 2048 kbps| Selectable Interfaces: X.21, V.35, Ethernet Bridge, G.703 E1| Transmission distance up to 80 km| Single fiber solution (WDM) available| Local and remote loop-back, BER test and performance monitoringon line and interface ports| Inband Remote Management| VT100 and optional SNMP management via a rack agent available| Manageable fiber optic modem for E1 speeds| High density variant with two fiber optic line and two copper userinterfaces| Various interfaces modules for X.21, V.35 and Ethernet available| Fiber optic interface offers multimode, singlemode variants andwavelength 850 nm, 1310 nm, 1550 nm with WDM support| Available as 3U rack mount card or as standalone unit| Automatic remote configurationData RateOn Interface PortOn Line PortUser Interface PortModular Interface PortFixed InterfaceLine PortFiber Optic LaserSingle Fiber Solution (WDM)ConnectorFeaturesModular Interface ModuleIntegrated BridgeManagementIn-band ManagementPerformance MonitoringAuto-sensingLoop backLEDsClockingPower ConsumptionPower SupplyMechanicsRack Mount CardDimensions (H x W x D)E1/T1: 2048 kbps/1544 kbps, n x 64/56 kbpsOptical Line SignalX.21 | DB15, V.35 | Winchester, Ethernet | RJ45E1/T1 | RJ45 (Max. 2)1 or 2 Laserson requestFC-PCSupportedIf equipped with FE ModuleVT100 via Single Slot HousingSNMP via MACS4000 AgentYesYesYesIn Compliance to ITU-T G.994.1 & ITU-T G.997.1Terminal and Facility Loop per PortFor Loops, Clock, Interface & Line SupervisionInternal, External, Remote – Single/Dual< 5 W230/115VAC or 48/24VDC3U30 x 130 x 190 mmOrder MatrixOM-FFractional E1 Optical ModemOptical Modem for structured (n x 64kbps) and unstructured (2.048kbps) E1 or transparent n x 64kbps data transmissionPortdensityOperationModeFunctionalExtensionFiberOpticFiber OpticConnectorInterfaceSpecificationInterfaceConnectorArt.No.Short Name1 FO Port and 1 Interface Port2 FO Ports and 2 Interface PortsFE1, n x 64 kbps (G.704 structured)E1, 2.048 kbps (G.703 unstructured)WDM1300nm Singlemode Standard FO1550nm Singlemode Economic FOFC-PCG.703 / G.704 (on-board)IM-C/S (Module)RJ45IM-C/S (Module)x x x x x x x 3007-001 OMR-F11/9FGR-3Rx x x x x x x 3007-011 OMR-F11/9FIM-3Rx x x x x x x x 3007-012 OMR-F11/Z9FIM-3Rx x x x x x x x 3007-014 OMR-F11/Z5FIM-3Rx x x x x x x 3007-018 OMR-F22/9FGR-3Rx x x x x x x x 3007-019 OMR-F22/Z9FGR-3Rx x x x x x x x 3007-020 OMR-F22/Z5FGR-3R37

Last Mile | TDM AccessCC-F | Modular Copper Converter for Fractional E1Fractional data transmission via copper lines with flexible interface modulesProduct Specifications| Data transmission via fractional or unframed E1 lines of up to 2 km| Interface data rate adjustable in steps of n x 64 kbps up to2048 kbps| Selectable V.35, X.21, Ethernet Bridge (supporting VLAN and autosensing),G.703/G.704 (E1) (on-board only)| Remote flash software update| Local and remote loopback, BER-test and performance monitoringat line and interface ports| Data rate: n x 64 kbps up to 2048 kbps| Modular design with interchangeable X.21, V.35 or Ethernet userinterface| Optional G.703/G.704 on-board user interface to enable repeaterfunctionality| VT100, Telnet or SNMP management options| Remote inband management| Performance monitoring for G.703/G.704 ports| Available as rack mount card (3U) or as standalone unitData RateInterface PortLine PortUser Interface PortModularFixed (On-board)Line PortInterfaceConnectorCodingDistances (max)FeaturesModular InterfacesIntegrated BridgeManagementIn-band ManagementUser Access LevelsRemote Flash UpdatePerformance MonitoringTest OptionsLoop backClock Sources / SystemsVoltage/Lightning ProtectionPower ConsumptionPower SupplyMechanicsRack Mount CardDimensions (H x W x D)n x 64 kbps up to 2048 kbps2048 kbpsX.21 | DB15 (female) V.35 | Winchester (female)Ethernet Bridge (10/100BaseTx) | RJ45E1 | RJ45E1 acc. ITU-T G.703 and G.704RJ45HDB3up to 2km (4-wire, 40dBX.21 | V.35 | Ethernet BridgeYes, if equipped with Ethernet moduleVT100 via Single Slot HousingSNMP via MACS4000 agentvia certain timeslot, SA4 bits or unframed line4via VT100 or SNMP/TelnetLine Quality Supervision for all G.704 interfacesBER test, self-test, loopsTerminal and Facility Loop per portinternal, external, remote / single, dualacc. ITU-T K20 and ITU-T K21< 7 W230/115V AC or 24/48V DC3U30 x 130 x 190 mmOrder MatrixCC-FModular Copper Converter for Fractional E1Copper Converter for transparent or structured (n x 64 kbps) and unstructured (2.048 kbps) G.703 data transmissionPort densityLineConnectorInterfaceSpecificationInterfaceConnectorArt.No.Short NameG.703/G.704 Line PortInterface PortsG.703/G.704 Extension Ports 1)RJ-45Support of PANDATEL Copper InterfaceModulesIM-C/S (Module)1 1 x x x 2861-001 CCR-F11/GBIM-3R1 1 1 x x x 2861-021 CCR-F12/GRIM-3R1) Extension port (with RJ45 connector only) can be configured to cascading, interface or backup modePlease order interface module separately.38

Last Mile | TDM AccessIM-C | Interface Modules for MACS4000Modular Copper Interface Modules offer a high variety and flexibility for CM-G, OM-F and CC-FProduct Specifications| IM-C/S-FEBR:Fast Ethernet bridge, 10/100 BaseT with VLAN support, Auto sensing(full and half duplex) and Auto crossing MDI/MDI-X| IM-C/S-X211:X.21 support, DB-15 connector, n x 64 kbps support| IM-C/S-V35W:V.35 interface, Winchester connector, n x 64 kbps supportType IM-C/S-FEBR IM-C/S-V35W IM-C/S-X211Max. Interface Data RateIn Steps OfInterface PortInterfaceSupported standardConnectorFeatures10/100 Mbpsn x 64 kbpsEthernet Bridge10/100BaseTXRJ458192 kbpsn x 64 kbpsSerialV.35Winchester8192 kbpsn x 64 kbpsSerialX.21DB-15| X.21, V.35 and Ethernet bridge modules for CM-G, OM-F and CC-Frack mount cards| Upgrade your existing product hardware to support different applications| Effective stock keeping due to full customer modularity| Let existing products grow with technology trends| Easy to assembleDimensionsVLAN SupportAuto SensingAuto CrossingFull /Half Duplex10/100 MbpsFlow ControlSeparation ofGrounding CircuitsDTE/DCE JumperSeparation ofGrounding CircuitsDTE/DCE JumperDCE/DTE ClockSignal JumperDCE/DTE HandshakeControlIndicator JumperH x W x D (mm) 19 x 65 x 95 19 x 65 x 95 19 x 65 x 95Suitable CardsCM-GOM-FCC-FYesYesYesYesYesYesYesYesYesOrder MatrixIM-CCopper Interface ModulePluggable Copper Interface Modules for MACS400System Specification Supported Products Interface Specification Interface Connector Art.No. Short NameStandard IM-C for Connectivity ProductsCM-GOM-FCC-FX.21V.35Ethernet BridgeDB-15WinchesterRJ-45x x x x x x 1761-001 IM-C/SX211x x x x x x 1762-001 IM-C/S-V35x x x x x x 1763-001 IM-C/S-FEBR39

Last Mile | TDM AccessFH/FL-P | Optical E1 ModemManaged E1/T1 transmission via optical fiberProduct Specifications| Data Rates: up to 2048 kbps (E1)| Interface: G.703, X.21, V.35, BRI (ISDN So)| FO Line: 850 nm Multimode and 1300 nm Singlemode| Transmission distance up to 50 km| Single Fiber Solution (WDM) for transmission of data via one fiber| VT100 Management/SNMP available| 3U rack mount card or standalone unit| Manageable fiber optic modem for E1 speed| Transmission distances up to 50 km| Single fiber solution (WDM) available| 3U rack mount card or standalone unitFH/FL-PData RateInterface PortInterfaceConnectorLine PortConnectorDistance / Budget (max)Multimode850 nmSinglemode1300 nm / LEDFeaturesManagementPower SupplyCertificationMechanicsRack Mount CardDimensions (H x W x D)64, 128, 256, 512, 1024 and 2048 kbpsX.21, V.35, G.703, BRI (ISDN So)DB-15, RJ45, WinchesterST, FC-PC4 km / 15 dB50 km / 20 dBOptional230/110 VAC, 48/24 VDCCE, UL3U30 x 130 x 190 mmOrder MatrixFH/FL-POptical E1 ModemRack Mount CardOperationModeFunctionalExtensionsFiber OpticFiber OpticConnectorInterfaceSpecificationInterfaceConnectorArt.No.Short Name64 ... 2048 kbpsE1, 2048 kbps (G.703 only)Control PortWDM850 nm Multimode Economic FO1300 nm Singlemode Standard FO1550 nm Singlemode Economic FOSTFC-PCX.21V.35G.703BRI (So)DB-15WinchesterRJ45BNCx x x x x x 3404-200 FHR-PL-C/8T5W-Rx x x x x 3404-156 FHR-PL/8T11-Rx x x x x 3404-187 FHR-PL/8TBR-Rx x x x x x x 3504-570 FLR-PJ-CY/Z5FGR-Rx x x x x x 3504-299 FLR-PJ-C/9FGR-Rx x x x x x 3504-262 FLR-PJ-C/9FGB-R40

Last Mile | TDM AccessFL-F | Low Cost Fractional Optical E1 modemFlexible data transmission at a rate n x 64 kbps through optical fiberProduct Specifications| Data Rates: n x 64 kbps up to 2048 kbps (E1)| Interface: V.35 (Winchester connector)| FO Line: 1300 nm Singlemode| Transmission distance up to 50 km| Single Fiber Solution (WDM) for transmission of data via one fiber| VT100 Management/SNMP available| 3U rack mount card or standalone unit| Manageable fractional fiber optic modem for E1 speed| Transmission distances up to 50 km| Single fiber solution (WDM) available| 3U rack mount card or standalone unitFL-FData RateInterface PortInterfaceConnectorLine Port1300 nm SinglemodeConnectorFeaturesManagementSingle Fiber Solution (WDM)Power SupplyMechanicsRack Mount CardDimensions (H x W x D)n x 64 kbps up to 2048 kbpsV.35Winchester28 dB/60 kmFC-PCSNMPYes230/115 VAC, 48 VDC3U30 x 130 x 190 mmOrder MatrixFL-FLow Cost Fractional Optical Modem3U Rack Mount CardOperationModeFunctional Extensions Fiber Optic Fiber OpticConnectorInterfaceSpecificationsInterfaceConnectorArt.No.Short NameFractional G.703, 32 x 64 kbpsControl PortWDM1300 nm Singlemode Standard FOFC-PCV.35Winchesterx x x x x x 3506-020 FLR-FJ-C/9F5W-Rx x x x x x 3506-047 FLR-FJ-CY/Z9F5W-R41

Last Mile | TDM AccessFL-E | E3/T3 Fiber Optic ModemHigh speed data transmission of electrical E3/T3 signals via optical fiberProduct Specifications| Data Rates: 34.368 Mbps (E3), 44.736 Mbps (T3)| Interface: G.703 (BNC)| Line: 1300 nm/1550 nm Singlemode (SC)| Transmission distance: up to 40 km| VT100 Management/SNMP available| 3U rack mount card or standalone unit| Manageable fiber optic modem for E3 and T3 speeds| G.703 interfaces and connectors available| Transmission distances up to 40 km| 3U rack mount card or standalone unitFL-EData RateInterface PortInterfaceConnectorLine PortConnectorDistance / Budget (max)34.368 Mbps (E3)44.736 Mbps (T3)G.703 (E3/T3)BNCSCSinglemode1300 nm / LED 40 km / 16 dBFeaturesManagementPower SupplyCertificationVT100/SNMP230/110 VAC, 48/24 VDCCE, ULMechanicsRack Mount CardDimensions (H x W x D)3U30 x 130 x 190 mmOrder MatrixFL-EE3 / T3 Fiber Optic ModemRack mount cardOperation ModeFunctionalExtensionsFiber OpticFiber OpticConnectorInterfaceSpecificationInterfaceConnectorArt.No.Short NameG.703, E3 (34,368 Mbps)G.703, T3 (44.736 Mbps)Control Port1300nm Singlemode Standard FOSCG.703BNCx x x x x x 3505-012 FLR-EE-C/9SGB-Rx x x x x x 3505-077 FLR-ET-C/9SGB-R42

Last Mile | TDM AccessFL-S | SDH/SONET Media Converter/ModemHigh speed conversion of STM-1/OC-3 signals. Optimal solution for SDH/SONET links.Product Specifications| Data Rates: 155.52 Mbps (STM-1)| Compatible interfaces: STM-1/OC-3 (BNC)| Line: 1300 nm/1550 nm Singlemode (SC)| Transmission distance up to 55 km| VT100 Management / SNMP available| 3U rack mount card or standalone unit| Manageable fiber optic modem for STM-1 (155 Mbps) data rates| Connecting branches via one STM-1/OC-3 connection| Transmission distances up to 55 km| 3U rack mount card or standalone unitFL-SData RateInterface PortInterfaceConnectorLine PortConnectorDistance / Budget (max)Singlemode1300 nm / LED1300 nm / LaserFeaturesManagementPower SupplyCertificationMechanicsRack Mount CardDimensions (H x W x D)155.52 MbpsSTM-1, STS-3C, OC-3BNCSC40 km / 11 dB55 km / 23 dBVT100/SNMP230/110 VAC, 48/24 VDCCE, UL3U30 x 130 x 190 mmOrder MatrixFL-SSONET/SDH Fiber Optic ConverterMedia Converter for OC-3/STM-1 speeds, Rack Mount CardOperation ModeFunctionalExtensionsFiber OpticFiber OpticConnectorInterfaceSpecificationInterfaceConnectorArt.No.Short NameSTM1OC3Control Port1300nm Singlemode Standard FO1300nm Singlemode Long Haul FOSCG.703BNCx x x x x x x 3508-014 FLR-SB-C/9SGB-Rx x x x x x x 3508-029 FLR-SB-C/4SGB-Rx x x x x x 3508-024 FLR-SB/9SGB-R43

Last Mile | TDM AccessDV-C | Digital Fiber Optic Video and Data ConverterDigital video & data converter from copper to fiber opticProduct Specifications| Data rates up to 230.4 kbps| Interface: RS485, RS422, RS232, Manchester or Sensornet| FO Line: 1300nm Singlemode| Transmission distance up to 60 km| Video signal: 1VPP| 3U rack mount card or standalone unit| Meets industrial demands as e.g. for airport, tunnel surveillance etc| Digital video transmission for up to 60 km| Offers transmission of bi-directional control data| Maximum data rate of 230.4 kbps (RS485) for DV-C| 3U rack mount card or standalone unitDV-CVideo PortNo of ChannelVideo FormatImput/Output ImpedanceBanwidthVideo SNRDifferential Gain/PhaseVideo ResolutionConnectorData PortRS485RS422RS232ConnectorFiber Optic1300 nm SinglemodeConnectorFeaturesHumidityOperating TemperatureStorage TemperaturePower ConsumptionPower SupplyCertificationsMechanicsRack Mount CardDimensions (H x W x D)1PAL, 10 Bit, 1 VPP75 Ohm5.5 MHz>55 dB3%, 3 o625 linesBNC230.4 kbps230.4 kbps115.2 kbps512 kbps (Manchester)230.4 kbps (Sensornet)BNC28 dB/60 kmST0 to 95%+5 O C ... +40 O C-30 O C ... +85 O C< 1 A230/115 VAC or 48 VDCCE, UL, EN, EN55022 class B, EN61000-43U30 x 130 x 190 mmOrder MatrixDV-CDigital Fiber Optic Video + Data ConverterRack Mount CardOperationModeFiber OpticFiber OpticConnectorDataInterfaceDataConnectorVideoInterfaceVideoConnectorArt.No.Short NameTransmitterReceiver1300 nm Singlemode Standard FOSTRS485RS422RS232RJ451 VPP, 75 OhmsBNCx x x x x x x x x 4071-002 DV-C/T9Tx x x x x x x x x 4071-005 DV-C/R9T44

CHASSIS AND HOUSINGSHighest flexibility with modular built systemsThe housing and rack system offered by Pandatel provides asmart modular solution in the range of racks and single/multislothousings, suitable for 3U and 6U rack mount cards. Thistype of solution offers a wide range of convenient options andpossibilities for the users, due to its unique technical (hardware)advantages as well as the high level of flexibility andadaptability of the system.ContentRA-T | Single and Multi Slot Housing for 3U and 6U rackmount cardsRA-U | 19“ Chassis for ten 3U rack mount cardsRA-HD | 19“ Chassis for twenty-four 3U rack mount cards orten 6U and four 3U rack mount cardsOnly top quality materials are used for the production of therack components. This condition has to be fulfilled in order toachieve optimum performance of the transmissions as well asmaximum protection of the system against corrosion. For thepurpose of achieving compact dimensions and optimum tracedepth parameters (which may be a significant advantage inview of space limitations), aluminium has been used as themain material for the production of such systems.A variety of options are available for modifying the configurationof Pandatel’s products within rack systems, or for settingup independent, flexible integrated solutions. In the courseof production of racks and accessories, Pandatel focus mainlyon the development of modular structures, whose range ofexpandability and adaptability supports maximum utilizationof the existing equipment as well as future modifications andnew applications. With this policy, Pandatel ensures optimalutilization of the existing and new racks as accessories innewly developed architectural solutions.45

Chassis and HousingRA-T | Modular Single and Multislot HousingUsing RA-T housing, 3U or 6U rack mount card becomes a standalone unitProduct Specifications| Single or Multi Slot Housing for 3U and 6U rack mount cards| VT100 management port via a RJ45 connector| Alarm contact| Ventilation unit with fan| 115/230 VAC integrated power supply or 48 VDC power supplyType RA-T-V-E/33 RA-T-V-E/93 RA-T-V/66 RA-T-IP-E/3-W RA-T-E/3-VNos of Card Slots 1 x 3U 3 x 3U 1 x 6U 1 x 3U 1 x 3UManagementVT100 PortConnectorAlarm ContactAlarm ConnectorYesRJ45YesRIA (3pin)YesRJ45YesRIA (3pin)YesRJ45YesRIA (3pin)No-YesRIA (3pin)No-YesRIA (3pin)Power Supply48 VDC115/230 VACConnector ACPower Cord ACVentilation FanYesYesInlet connector (IEC 320)European/British/US/AustralianStandardYesYesInlet connector (IEC 320)European/British/US/AustralianStandardYesYesInlet connector (IEC 320)European/British/US/Australian-NoYesInlet connector (IEC 320)European/British/US/AustralianStandardYesNoInlet connector (IEC 320)-StandardEnvironmentalTemperature (operation)Temperature (storage)Humidity+5…+40°C-30…+80°C10…90%, non cond+5…+40°C-30…+80°C10…90%, non cond+5…+40°C-30…+80°C10…90%, non cond+5…+40°C-30…+80°C10…90%, non cond+5…+40°C-30…+80°C10…90%, non condMechanicsDimensions (H x W x D) 39 x 144 x 267 mm 39 x 412 x 267 mm 39 x 278 x 267 mm 42 x 145 x 255 mm 42 x 145 x 255 mmSuitable Rack Mount CardsET-CA, ET-CB, CM-G, OM-F, CC-FCOP-FE, COP-RS,COP-FO, INV-MUX-SGM-F, INAX-CV, GM-E, FL-P, FL-F, FL-E, FL-S, DV-COrder MatrixRA-TModular Single and Multi Slot HousingProduct Design Card Density Functional Power Supply Art.No. Short Name3U6U9U1 x 3U3 x 3U1 x 6UControl Port (RJ45)Ventilation115...230 VAC withoutpower cord48 VDCPower Cordx x x x x 1201-204 RA-T-V-E/33-Wx x x x x 1201-205 RA-T-V-E/33-Vx x x x 1201-202 RA-T-V/66-Wx x x x 1201-203 RA-T-V/66-Vx x x x x 1201-230 RA-T-V-E/93-Wx x x x x 1201-231 RA-T-V-E/93-Vx x x x 1200-154 RA-T-IP-E/3-Wx x x x 1200-101 RA-T-E/3-Vx 0500-001 PC-Ex 0500-002 PC-Bx 0500-003 PC-Ax 0500-004 PC-U46

Chassis and HousingRA-U/RA-HD | Manageable 3U and 6U 19“ Chassis19“ Rack for 3U and 6U rack mount cardsProduct Specifications| RA-U/33:- up to 10 x 3U rack mount cards| RA-HD:- up to 24 x 3U rack mount cards- up to 10 x 6U + 4 x 3U rack mount cards| Manageable via SNMP, Telnet, VT100 or web browser| Redundancy AC/AC, DC/DC or AC/DC power supply| Easy installation due to hot-swappable rack mount cards| 3U and 6U chassis for 19” cabinets| Enhanced system control functionalities e.g. power management ortemperature supervision| Power redundancy| Manageable via SC-MC main agent| Up to 9 racks can be cascaded via sub-agent SC-SCCard SlotManagement SlotPower Supply SlotManagementMain AgentSNMP, Telnet, VT100ConnectorRA-U10 x 3U1 x 3U2 x 3UYesRJ45/USBRA-HD24 x 3U or 4 x 3U + 10 x 6U1 x 3U2 x 3UYesRJ45/USBSubagentConnectorUSBUSBAlarm CardOrder MatrixRA-U/RA-HDAdd-on for 19“ ChassisManagement and Accessories for 19“ ChassisRack Add-on Art.No. Short NameRA-URA-HDManagementCover PlateFan & Alarm ModulePower SupplyPower CordDimensionConnectorFan ModulesOptional3URIA (3pin)Optional3URIA (3pin)With Alarm Optional OptionalPowerPower SupplyPower redundancyConnector ACConnector DCPower CordsMechanics115/230 VAC, 48 VDCAC/AC, DC/DC or AC/DCInlet connector (IEC 320)Phoenix (4pin)European/British/US/Australian115/230 VAC, 48 VDCAC/AC, DC/DC or AC/DCInlet connector (IEC 320)Phoenix (4pin)European/British/US/AustralianDimensions (H x W x D) 132.5 x 482.6 x 242 mm 265 x 482.5 x 242 mmx x x 1781-001 SC-MC/9x x x 1781-031 SC-SC/4x x 1200-252 CP-3/6-MRA-U/RA-HDManageable 3U and 6U 19“ Chassisx x 1200-253 CP-3/5.5-M19“ racks for up to 10 x 3U, 24 x 3U or 10 x 6U + 4 x 3U rack mount cardsx x 1200-254 CP-3/8.5-Mx x 1200-255 CP-6/6-MProductDesignCard DensityFunctionalExtensionsPowerSupplyArt.No.Short Namex x 1200-256 CP-3/4-Mx x x 1200-221 RA-ALARMx x x 1200-222 RA-ALARM/FANx x x 1288-101 RN-X-VR/81M2-Mx x x 1288-102 RN-X-2R/81M2-Mx x x 0500-005 PC-X-Ex x x 0500-006 PC-X-Bx x x 0500-001 PC-Ex x x 0500-002 PC-B3U Height6U Height10 x 3U24 x 3U10 x 6U + 4 x 3UAlarm Port (RIA)VentilationQuadrofeed Power Supply Support(AC/AC, DC/DC, AC/DC, DC/AC)AC (115...230) or 48 VDCx x x x x 1202-201 RA-U/33-Qx x x 0500-003 PC-Ax x x 0500-004 PC-Ux x x x x 1296-201 RA-HD/63-Qx x x x x 1296-202 RA-HD/66-Q47

All rights reserved subject to design, colour deviation and technical changes. Availability of products upon request. ©2006 Pandatel AG All rights reserved subject to alterations and errors.HEADQUARTER – EUROPE, MIDDLE EAST, AFRICAPandatel AGGarbsener Landstraße 10D-30419 Hanover | GermanyPhone: +49 (0) 511 277 2600 | Fax: +49 (0) 511 277 2677Email: info@pandatel.comUKPandatel AGRepresentative Office | 107 Vale RoadGU12 Aldershot | UKPhone: +44 (0) 12 52-67 95 77Email: sales@pandatel.co.ukFRANCEPandatel AGLes bureaux de Sèvres | 2, rue Troyon92316 Sèvres Cdx | FrancePhone: +33 1 41 14 60 70 | Fax: +33 1 41 14 60 71Email: france@pandatel.comAMERICADowslake Microsystems3206 Scott Blvd.Santa Clara | CA 95054Phone: +1 (408) 492 - 1100 | Fax: +1 (408) 492 -1122Email: info@dowslakemicro.comASIA PACIFICPandatel Asia Pacific3 International Business Park | #03-26 Nordic European CenterSingapore 609927 | SingaporePhone: +65 6890 6520 | Fax: +65 6890 6525Email: info@pandatel.com.sgCHINADowslake Microsystems China5th floor | Bldg. 45 | #555 Guiping RoadCaoHeJing High-Tech ParkShanghai | People‘s Republic of ChinaPhone: +86 21 54262227 | Fax: +86 21 54262225Email: info@dowslakemicro.com48