Hanging Platform - Combisafe
Hanging Platform - Combisafe
Hanging Platform - Combisafe
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2115_004Assembly<strong>Combisafe</strong> <strong>Hanging</strong> <strong>Platform</strong>Assembly of Corner <strong>Platform</strong>The Corner <strong>Platform</strong> can be assembled in two ways: using a Corner <strong>Platform</strong> Attachmentor extended <strong>Hanging</strong> <strong>Platform</strong> Clamp.Assembly with Corner <strong>Platform</strong> Attachment1. Fit the Corner <strong>Platform</strong> Attachment using a suitable fixing on each side of thecorner. Each anchor must be capable of accepting a combined load of5.0 kN in withdrawal load and 6.3 kN in shear. With some fixings it may bepossible to drill straight through the Corner <strong>Platform</strong> Attachment, using it asa drill guide. Now continue to assemble the Corner <strong>Platform</strong> as per item 2Page 37.Figure 34. Assembly of Corner <strong>Platform</strong> AttachmentAssembly with extended <strong>Hanging</strong> <strong>Platform</strong> ClampThis assumes that the roof truss protrudes at a 45° angle in the corner. Check thebearing capacity of the roof truss.1. Fit an extended <strong>Hanging</strong> <strong>Platform</strong> Clamp to the corner roof truss, see assemblyof <strong>Hanging</strong> <strong>Platform</strong> Clamp. Page 27. Now continue to assemble the Corner<strong>Platform</strong> as per item 2 Page 37.36