Hanging Platform - Combisafe

More documents

Recommendations

Info

AssemblyCombisafe Hanging PlatformAlternative assembly of Keyhole AttachmentAs an alternative the Hanging Platform Console, Telescope Arm and Keyhole Attachmentcan be fitted together before being suspended.Figure 26. Alternative assembly of Keyhole Attachment30
Combisafe Hanging PlatformAssemblyHanging Platform BeamMax c-c distance is 2.4 m.1. Decide how much of the Hanging Platform Beam needs to protrude. Takeinto consideration the loads from the Hanging Platform Beam when selectingthe fixings and ensure the capacity of the support edge. These loads affectthe length of cantilever.2. Fit the Hanging Platform Beam using suitable fixings.Figure 27. Assembly of Hanging Platform Beam3. Fit the Keyhole Attachment on the Hanging Platform Beam screw.4. Check that the Keyhole Attachment is hanging plumb and tighten the screw.Figure 28. Assembly of Keyhole Attachment on Hanging Platform Beam31
Page 1: ®COMBISAFEHanging PlatformIncludin
Page 4 and 5: GeneralCombisafe Hanging PlatformGe
Page 6: Safety instructionsCombisafe Hangin
Page 9 and 10: Combisafe Hanging PlatformTechnical
Page 17 and 18: 2115_0022115_001Combisafe Hanging P
Page 25 and 26: 918Combisafe Hanging PlatformTechni
Page 27 and 28: 2130_001Combisafe Hanging PlatformA
Page 29: Combisafe Hanging PlatformAssemblyK
Page 33 and 34: Combisafe Hanging PlatformAssemblyA
Page 35 and 36: Combisafe Hanging PlatformAssemblyN
Page 37 and 38: Combisafe Hanging PlatformAssembly2
Page 39 and 40: Combisafe Hanging PlatformAssembly5
Page 41 and 42: Combisafe Hanging PlatformAssemblyS
Page 43 and 44: Combisafe Hanging PlatformAssemblyF
Page 45 and 46: 2350_002Combisafe Hanging PlatformA
Page 47 and 48: Combisafe Hanging PlatformInspectio
Page 49 and 50: Combisafe Hanging PlatformMaintenan
Page 52: ®COMBISAFECombisafe International

Hanging Platform - Combisafe

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?